LED safety Luminaries
LED safety luminaire 5 years guarantee on LEDs INOTEC LED Safety luminaires high light output and variable SN 6204 LED SN 8141.1 LED SN 9024 LED Technical data SN 6101 LED SN 9141.1 LED SN 6205 LED Safety lights to DIN VDE 0108 / EN 50172, EN 1838 and IEC 60598-2-22 For systems to DIN VDE 0108 and EN 50171 EMC protection to. DIN EN 55015 Incl. LED illuminant 5 Years guarantee on LEDs Terminals: 2,5 mm² for through-wiring Enclosure type-wise: Stainless steel, aluminium or sheet steel LED J/SV SN 6109 LED SN 8124.1 LED SN 2518.1 LED SN 6203 LED SN 9124.1 LED SN 804D LED SN 6114 LED SN 9104.1 LED SN 804E LED With constant current supply Easily addressable for INOTEC individual lamp monitoring (J/SV) Dimmable in mains operation For the connection to central- or low power supply battery systems. 230V±10% AC / 220V±20%DC Protection class: I or II Permissable temperature: -15 C... +45 C LED 24V With 24Vconstant current supply unit incl. INOTEC single luminaire monitoring without address switch For connection to CLS 24 or CPUSB 220/64/24V 24V±20% DC Protection class: III Permissable temperature:-15 C... +40 C LED With 24V current supply unit for connection to CPS 220 system via PSU 24 or J-ET moduls. Permissable temperature: -15 C... +45 C Copyright: INOTEC Sicherheitstechnik GmbH, Ense Publications and copies, even partial, only with manufacturers permission. Subject to technical changes. Due to component tolerances measured values may vary!
SN 6204 152 Dimensions (mm) L=210, H=145,3, D=67 For wall mounting Enclosure: dark grey (similar RAL 7015) or white structured (RAL 9016) Protection category: IP 65 145,3 210 4 63 LED J/SV 230V LED 24V with 3 LEDs with 3 LEDs Bat Em: 25mA 150mA PMains: 9,8VA SN 6204 Multi-purpose LED safety luminaire This stylish luminaire is designated to cover applications where ceiling mounting is not possible or appropriate. Corridors and, due to the high IP degree, outdoor usages like the illumination of final exit-doors or emergency stairs, are most common. Wall, middle Mounting height (h) Distance to middle (t) 1,0m 2,0m 3,0m 2,0m 2,8 7,0 2,8 7,2 2,3 6,8 2,5m 3,0 7,4 3,0 7,8 2,6 7,4 3,0m 3,1 8,0 3,1 8,4 2,7 8,1 3,5m 3,2 8,5 3,2 8,7 2,8 8,5 4,0m 3,1 8,7 3,1 9,1 2,8 8,8 4,5m 3,0 9,0 3,0 9,3 2,7 9,0 5,0m 2,8 9,0 2,8 9,3 2,5 9,1 5,5m 2,6 9,0 2,6 9,3 2,0 9,1 6,0m 2,2 8,8 2,1 9,2 1,5 8,9 Measurement plane 2cm above floor level h 3 t
SN 6124 ø81 ø68 61 Dimensions Cover (mm) ø 81, D=6 Cut out (mm) ø 68, D=61 For recessed wall or stair mounting Enclosure: Hollow wall box Cover: Stainless steel A4 brushed 6 Bat Em: LED 24V with 6 LEDs 125mA SN 6109 65 160 180 Dimensions Cover (mm) L=180, H=65, D=4 Cut out (mm) L=130-150, H=30-60, D=35 For recessed wall or stair mounting Cover: Stainless steel A4 brushed Connection terminal: 1,5mm² 35 4 120 LED LED 24V with 4 LEDs with 2 LEDs Bat Em: 13mA 115mA PMains: 2,8VA SN 6109 Top quality stair luminaires The high-grade steel luminaires for staircases. They allow the illumination of stairs in mains healthy and /or emergency situations. The front plate of the SN 6109 can be made to suit your requirements. Contact us for further information. 4
SN 6203 30 30 200 24 200 24 Dimensions (mm) L=200, H=30, D=24 For wall or stair mounting Enclosure: Aluminium with grid front plate or impact resistant poly-carbonate insert Cover: Stainless steel A4 brushed Connection terminal: 1,5mm² LED LED 24V with 5 LEDs with 4 LEDs Bat Em: 16mA 100mA PMains: 3,5VA SN 6114 70 70 60 260 70 260 70 245 Dimensions Cover (mm) L=260, H=70, D=7 Cut out (mm) L=245, H=60, D=63 For recessed wall or stair mounting Enclosure: Die cast aluminium with grid front plate or impact resistant polycarbonate insert Protection category: IP 54 LED J/SV 230V LED 24V with 3 LEDs with 3 LEDs Bat Em: 25mA 150mA PMains: 9,8VA 5
SN 8141.1 ø 125 52 Dimensions (mm) ø125, D=52 Dimensions (mm) L=125, H=125, D=52 For ceiling mounting Enclosure: Aluminium white structured (RAL 9016), silver grey (similar RAL 9022) or special colours Protection category: IP 40 Bat Em: PMains: LED J/SV 230V with 4 LEDs 32mA 11,1VA Accessories: Mounting adaptor for surface wiring, protection grid 125 120 52 120 28 Ceiling, middle Mounting height 2,0m 3,3 8,3 2,5m 3,7 9,2 3,0m 4,0 9,9 3,5m 4,0 10,5 4,0m 4,1 11,0 4,5m 4,3 11,4 5,0m 4,3 11,7 5,5m 4,3 12,0 6,0m 4,2 12,1 6,5m 4,0 12,2 7,0m 3,8 12,1 7,5m 3,5 12,1 8,0m 3,1 11,9 8,5m 2,6 11,7 9,0m 1,9 11,3 9,5m 1,1 10,8 10,0m 0,9 8,9 Measurement plane 2cm above floor level 6
SN 9141 ø 125 ø 68 2 28 Dimensions Cover (mm) ø125, D=2 Dimensions Cover (mm) L=125, H=125, D=2 Cut out (mm) ø 68, D=28 For recessed ceiling mounting Enclosure: Aluminium, white structured (RAL 9016), silver grey (similar RAL 9022) or special colours LED J/SV 230V LED 24V with 4 LEDs with 4 LEDs Bat Em: 32mA 200mA PMains: 11,1VA ø 68 125 2 28 Ceiling, middle Mounting height 2,0m 3,3 8,3 2,5m 3,7 9,2 3,0m 4,0 9,9 3,5m 4,0 10,5 4,0m 4,1 11,0 4,5m 4,3 11,4 5,0m 4,3 11,7 5,5m 4,3 12,0 6,0m 4,2 12,1 6,5m 4,0 12,2 7,0m 3,8 12,1 7,5m 3,5 12,1 8,0m 3,1 11,9 8,5m 2,6 11,7 9,0m 1,9 11,3 9,5m 1,1 10,8 10,0m 0,9 8,9 Measurement plane 2cm above floor level 7
SN 8124.1-11 SN 8124.1-41 ø85 ø76 41 Dimensions (mm) ø=85, D=41 Dimensions (mm) L=85, H=85, D=41 For ceiling mounting Enclosure: Aluminium white structured (RAL 9016), silver grey (similar RAL 9022) or special colours Protection category: IP 40 ø85 LED 24V LED 24V with 1 LED with 4 LEDs Bat Em: 80mA 200mA 85 80 80 Accessories: Mounting adaptor for surface wiring, protection grid 25 28 85 41 80 80 Ceiling, middle Mounting height 2,0m 1,9 5,2 3,3 8,3 2,5m 2,0 5,5 3,7 9,2 3,0m 1,8 5,6 4,0 9,9 3,5m 1,6 5,6 4,0 10,5 4,0m 1,0 5,4 4,1 11,0 4,5m 1,0 5,0 4,3 11,4 5,0m - - 4,3 11,7 5,5m - - 4,3 12,0 6,0m - - 4,2 12,1 6,5m - - 4,0 12,2 7,0m - - 3,8 12,1 7,5m - - 3,5 12,1 8,0m - - 3,1 11,9 8,5m - - 2,6 11,7 9,0m - - 1,9 11,3 9,5m - - 1,1 10,8 10,0m - - 0,9 8,9 Measurement plane 2cm above floor level 8
SN 9124.1-11 SN 9124.1-41 ø85 ø85 5 ø68 61 Dimensions Cover (mm) ø=85, D=5 Dimensions Cover (mm) L=85, H=85, D=5 Cut out (mm) ø 68, D=61 For recessed ceiling mounting Cover: Stainless steel A4 brushed or white structured (RAL 9016) or special colours LED 24V LED 24V with 1 LED with 4 LEDs Bat Em: 80mA 200mA 85 ø68 85 5 61 Ceiling, middle Mounting height 2,0m 1,9 5,2 3,3 8,3 2,5m 2,0 5,5 3,7 9,2 3,0m 1,8 5,6 4,0 9,9 3,5m 1,6 5,6 4,0 10,5 4,0m 1,0 5,4 4,1 11,0 4,5m 1,0 5,0 4,3 11,4 5,0m - - 4,3 11,7 5,5m - - 4,3 12,0 6,0m - - 4,2 12,1 6,5m - - 4,0 12,2 7,0m - - 3,8 12,1 7,5m - - 3,5 12,1 8,0m - - 3,1 11,9 8,5m - - 2,6 11,7 9,0m - - 1,9 11,3 9,5m - - 1,1 10,8 10,0m - - 0,9 8,9 Measurement plane 2cm above floor level 9
SN 9104.1-11 SN 9104.1-41 ø85 85 ø 68 2 28 Dimensions Cover (mm) ø 85, D=2 Dimensions Cover (mm) L=85, H=85, D=2 Cut out (mm) ø 68, D=30 For recessed ceiling mounting Cover: Stainless steel A4 brushed or white structured (RAL 9016) or special colours LED J/SV 230V LED J/SV 230V LED 24V LED 24V with 1 LEDs with 4 LEDs with 1 LEDs with 4 LEDs Bat Em: 12mA 32mA 80mA 200mA PMains: 7,4VA 11,1VA 35,5 49 186 Power supply LED J/SV Dimensions (mm) L=186, H=49, D=35,5 Protection class: I or II 30 110 Power supply 24V Dimensions (mm) L=110, H=30, D=16 Protection class: III No through wiring! 16 Ceiling, middle Mounting height 2,0m 1,9 5,2 3,3 8,3 2,5m 2,0 5,5 3,7 9,2 3,0m 1,8 5,6 4,0 9,9 3,5m 1,6 5,6 4,0 10,5 4,0m 1,0 5,4 4,1 11,0 4,5m 1,0 5,0 4,3 11,4 5,0m - - 4,3 11,7 5,5m - - 4,3 12,0 6,0m - - 4,2 12,1 6,5m - - 4,0 12,2 7,0m - - 3,8 12,1 7,5m - - 3,5 12,1 8,0m - - 3,1 11,9 8,5m - - 2,6 11,7 9,0m - - 1,9 11,3 9,5m - - 1,1 10,8 10,0m - - 0,9 8,9 Measurement plane 2cm above floor level 10
SN 9024 E LED 8 Einbau ø38 ø45 30 Dimensions Cover (mm) ø 45, D=8 Cut out (mm) ø 38, D=30 For recessed ceiling mounting Cover: Stainless steel / aluminium white structured (RAL 9016) or special colours 110 No through wiring! Bat Em: LED 24V with 1 LEDs 80mA 16 30 Power supply SN 9024 L LED Einbau ø33 Dimensions Cover (mm) ø 36, D=8 Cut out (mm) ø 33, D=46 Für Leuchteneinbaumontage Cover: Stainless steel / aluminium, anodised aluminium 8 ø36 46 Bat Em: LED 24V with 1 LEDs 80mA Measurement plane 2cm above floor level Mounting height Ceiling, middle 2,0m 2,0 5,8 2,5m 2,0 5,8 3,0m 1,8 5,8 3,5m 1,2 5,4 4,0m - 5,2 4,5m - 4,4 5,0m - 3,8 5,5m - 2,0 Less is more! SN 9024 Lowest power consumption can give you maximum safety and approx. 6m luminaire distance. 11
Safety and orientation light with LED SN 6205 LED Dimensions (mm) L=230, H=30, D=50 230 183 50 30 For wall mounting Enclosure: Aluminium and sheet steel silver grey (similar RAL 9022) No through wiring! Bat Em: LED 24V with 2 LEDs 115mA SN 6205 Aesthetically pleasing and safe Elegant luminaire in new LED-lightguide-technology allowing individual, creative, project based safety- and signing concepts. 12
SN 2518.1 136 Dimensions (mm) L=356, H=136, D=79 For wall or ceiling mounting Enclosure: Polycarbonate, high impact resistant Protection category: IP 65 356 79 LED J/SV 230V LED 24V with 4 LEDs with 4 LEDs Bat Em: 32mA 200mA PMains: 11,1VA Ceiling, middle Mounting height 2,0m 3,6 8,4 8,0 3,6 2,5m 4,0 9,7 9,5 4,0 3,0m 4,4 10,8 10,7 4,4 3,5m 4,2 11,6 11,6 4,6 4,0m 4,3 12,2 12,3 4,7 4,5m 4,5 12,2 12,8 5,0 5,0m 4,8 11,9 13,2 5,0 5,5m 5,0 12,1 13,6 5,0 6,0m 5,0 12,5 13,9 5,0 6,5m 5,0 12,9 14,0 4,9 7,0m 4,8 13,4 14,2 4,8 7,5m 4,6 13,9 14,3 4,7 8,0m 4,3 14,2 14,3 4,3 8,5m 4,0 14,1 14,2 4,0 9,0m 3,6 14,1 14,1 3,6 9,5m 3,0 14,0 13,9 3,0 10,0m 2,2 13,5 13,7 2,3 Measurement plane 2cm above floor level 13
SN 804 D LED 60 Dimensions (mm) L=120, H=120, D=60 For wall or ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65 120 LED J/SV 230V LED 24V with 4 LEDs with 4 LEDs Bat Em: 32mA 200mA PMains: 11,1VA SN 804 D AP LED 60 120 SN 804... Ceiling, middle Mounting height 2,0m 3,3 8,3 2,5m 3,7 9,2 3,0m 4,0 9,9 3,5m 4,0 10,5 4,0m 4,1 11,0 4,5m 4,3 11,4 5,0m 4,3 11,7 5,5m 4,3 12,0 6,0m 4,2 12,1 6,5m 4,0 12,2 7,0m 3,8 12,1 7,5m 3,5 12,1 8,0m 3,1 11,9 8,5m 2,6 11,7 9,0m 1,9 11,3 9,5m 1,1 10,8 10,0m 0,9 8,9 Measurement plane 2cm above floor level 14
SN 804 W LED 120 60 Dimensions (mm) L=120, H=120, D=60 For wall or ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65 LED J/SV 230V with 4 LEDs LED 24V with 4 LEDs Bat Em: 32mA 200mA PMains: 11,1VA SN 804 Robust and flexible. The high protection category and the robust high-grade steel housing are the ideal solution for rough industrial environments. Mounting accessories allow the usage on uneven surface maintaining the perpendicular illumination of the escape route. SN 804 E LED 160 85 62 Dimensions Cover (mm) L=160, H=160, D=2 Cut out (mm) L=137, H=124, D=60 For recessed ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65 LED J/SV 230V LED 24V with 4 LEDs with 4 LEDs Bat Em: 32mA 200mA PMains: 11,1VA 15
707 sgabe 082 2007/03 03/2010 INOTEC Sicherheitstechnik GmbH Am Buschgarten 17 D - 59 469 Ense Tel +49 29 38/97 30-0 Fax +49 29 38/97 30-29 info@inotec-licht.de www.inotec-licht.de