CNC ROTARY TABLE Features: Pneumatic / Hydraulic Clamping Pre Loaded Axial Radial Roller Bearing Gear Mechanism - Motor to Worm Shaft Dual Lead Worm Gear set Vertical mounting Option available with Vertical/Horizontal mounting Specification Model URH-151 URH-170 URH-01 URH-51 Turn Table diameter (mm) ø150 ø170 ø00 ø Table Center height (mm) 110 Center Bore diameter (H7) (mm) T-Slot size (mm) Ref slots (H7) Other slots (H8) ø40 10x 10x Tenon Slot size (H7) (mm) 14 Servo Motor Torque (Nm) # Speed Reduction ratio 1:90 Table Gyration angle/pulse Table Rotation speed (rpm) Load Capacity (kg) Max. Thrust load (N) Tilting moment (Nm) Clamp Torque (Nm) (Motor 000 rpm). Horizontal 100 Vertical 0 With tailstock support 100 Horizontal 8000 Vertical 0 Horizontal (FxL) Vertical (FxL) 150 Pneumatic @ 5 bar 150 Hydraulic @ 0 bar Driving Torque (Nm) 150 15 ø40 1x1 14 1:90. 00 100 00 1000 4500 1000 50 00 450 140 ø0 14 1:90. 00 150 00 10 5000 100 700 500 10 ø0 1x 1:10 5 50 0 50 0000 7000 000 100 Allowable work Inertia (kg.m ) 0.5 0.8 1.5.4 Indexing Accuracy * (Arc Sec) ±0" Repeatability (Arc Sec) Net Weight (kg) (approx) 9 45 0 100 * Higher Accuracy ± 5 on request # Check motor models on Page No. 70 ## Option available with pressurisation - Please contact us
DIMENSIONAL DIAGRAMS Model URH-151 (Right Hand Motor Mounting) Model URH-151 (Right Motor Mounting) Model URH-170 (Right Hand Motor Mounting) Model URH-170 (Rear Motor Mounting) Model URH-01 (Right Hand Motor Mounting) Model URH-01 (Rear Motor Mounting) Left hand Motor Mounting also available. Model URH-51 (Right Hand Motor Mounting) Model URH-51 (Rear Motor Mounting) Left hand Motor Mounting also available. Dimensions marked as # may vary according to the motor being used.
CNC ROTARY TABLE Specification Model Turn Table diameter (mm) Table Center height (mm) Center Bore diameter (H7) (mm) Ref slots (H7) T-Slot size (mm) Other slots (H8) Tenon Slot size (H7) (mm) Servo Motor Torque (Nm) # Speed Reduction ratio Table Gyration angle/pulse Table Rotation speed (rpm) (Motor 000 rpm) Horizontal Load Capacity (kg) Vertical With tailstock support Horizontal Max. Thrust load (N) Vertical Horizontal (FxL) Tilting moment (Nm) Vertical (FxL) Clamp Torque (Nm) Hydraulic @ 0 bar Driving Torque (Nm) Ordering code for CNC RotaryTables URH- 500- X-RPS S-Special None-Standard Braking System H-Hydraulic Clamping P-Pneumatic Clamping Motor Mounting B-Rear Mounting L-Left Mounting R-Right Mounting Table Top None-Round Sq-Square Size of the table CNC RotaryTables URH-1 URH-401 URH-500 URH-1 ø0 10 ø100 14x 14x 1:144 0.001 0.8 0 8500 000 000 1100 ø 0 ø100 14x 14x 9 1:0 0.001 11.11 750 50 750 0000 10000 4500 000 800 ø500 10 ø100 x x 1 1:144 0.001 ** 1.88 900 900 5000 11000 0 000 750 1000 ø0 5 0100 x x 1 1:0 0.001 ** 11.11 00 500 00 00 1000 8000 000 500 00 Allowable work Inertia (kg.m ) 4 44 5 8 Indexing Accuracy * (Arc Sec) Repeatability (Arc Sec) NetWeight (kg) (approx) 00 470 75 * Higher Accuracy ± 5 on request ** Motor RPM 000 # Check motor models on Page No. 70 ## Option available with pressurisation - Please contact us 4
DIMENSIONAL DIAGRAMS Model URH-1 (Right Hand Motor Mounting) Model URH-1 (Rear Motor Mounting) Left hand Motor Mounting also available. Model URH-401 (Right Hand Motor Mounting) Model URH-401 (Rear Motor Mounting) Left hand Motor Mounting also available. Model URH-500 (Right Hand Motor Mounting) Model URH-500 (Rear Motor Mounting) Model URH-1 (Right Hand Motor Mounting) Dimensions marked as # is dependent on motor being used. 5
CNC ROTARY TABLE Features: Pneumatic / Hydraulic Clamping Pre Loaded Axial Radial Roller Bearing Gear Mechanism - Motor to Worm Shaft Dual Lead Worm Gear set Vertical mounting Option available with Vertical /Horizontal mounting High Clamping Torque Specification Model URX-0 URX-00 URX- URX-0 Turn Table diameter (mm) ø0 ø00 ø ø0 Table Center height (mm) 15 Center Bore diameter (H7) (mm) T-Slot size (mm) Ref slots (H7) Other slots (H8) ø0 Tenon Slot size (H7) (mm) 14 Servo Motor Torque (Nm) # Speed Reduction ratio 1:90 Table Gyration angle/pulse Table Rotation speed (rpm) Load Capacity (kg) Max. Thrust load (N) Tilting moment (Nm) Clamp Torque (Nm) (Motor 000 rpm). Horizontal Vertical 15 With tailstock support Horizontal 1000 Vertical 4500 Horizontal (FxL) 1100 Vertical (FxL) 50 Pneumatic @ 5 bar 50 Hydraulic @ 0 bar 450 Driving Torque (Nm) 140 ø0 14 1:90. 00 150 00 10 5000 100 700 900 10 ø0 1x 1x 1:10 5 0 0000 7000 000 100 450 1100 10 ø100 14x 14x 1:144 0.8 0 8500 000 000-1700 Allowable work Inertia (kg.m ) 1.0 1.5.4 4 Indexing Accuracy * (Arc Sec) ±15 Repeatability (Arc Sec) 4 NetWeight (kg) (approx) 45 0 100 0 * Higher Accuracy ± 5 on request # Check motor models on Page No. 70 ## Option available with pressurisation - Please contact us
DIMENSIONAL DIAGRAMS Model URX-0 (Right Hand Motor Mounting) Model URX-00 (Right Hand Motor Mounting) Model URX- (Right Hand Motor Mounting) Model URX-0 (Right Hand Motor Mounting) Dimensions marked as # is dependent on motor being used. 7
UCAM PVT. LTD. Head Office: A11/A1, 1st Stage, 1st Cross, Peenya Industrial Area, Bangalore - 50 058. INDIA. Tel: +91-80 - 40744777, Fax: +91-80 - 40744711 Email: sales@ucamind.com, info@ucamind.com www.ucamind.com Factory: Plot No. 97 & 98, 1st Stage, Sompura KIADB Industrial Area, Dobbaspet, Sompura Hobli, Nelamangala Taluk, Bangalore Rural Dist 5111. INDIA. Branch Offices New Delhi: Mobile: +91-91 17 Email: delhi@ucamind.com Pune: Mobile: +91-9701 47 Email: ucampune@ucamind.com Ahmedabad: Mobile: +91-985 15740 Email: gujarat@ucamind.com Bangalore: Mobile: +91-94 5905 Email: bangalore@ucamind.com Chennai: Mobile: +91-7999 9890 Email: chennai@ucamind.com International Sales Mobile: +91-951 7 Email: exports@ucamind.com Hyderabad: Mobile: +91-99894 47117 Email: hyderabad@ucamind.com www.ucamind.com Catalogue No. UCAM-Gen-017//. UCAM reserves the right to change specifications and dimensions without prior information.