kenall dark sky luminaires Millenium Finite Wall Mount Millenium Edge Ceiling Mount Herculux Wall and Ceiling Mount
Kenall's dark sky solution As more buildings are constructed and equipped with powerful outdoor lighting systems, light pollution becomes an increasingly significant problem: stray light saturates the night sky, obscuring the stars while also emitting visibility-reducing glare, wasting energy and creating potentially harmful conditions for wildlife and ecosystems. The Dark Sky movement responds to nighttime light pollution by raising both public and industry awareness of the problem. The International Dark-Sky Association (IDA), a leader in the Dark Sky movement, works to preserve the natural state of nighttime skies by approving outdoor lighting fixtures that prevent light from being emitted above the horizontal plane. Only fixtures meeting IDA's stringent horizontal cutoff criteria earn the IDA-Approved designation. Kenall supports the Dark Sky movement and has responded by developing Millenium Finite, a family of superior security fixtures comprised of IDA-Approved luminaires. Millenium Finite 15 Pages 4 17 Millenium Finite 9 Pages 4 17 Millenium Edge Pages 18 25 Herculux Fully Shielded Pages 26 33 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
kenall dark sky luminaires Kenall s Millenium Finite series gives lighting professionals IDA-Approved Dark Sky solutions with the durability, styling, and performance that have made Millenium the leader in its category. Engineered to work in conjunction with the latest, most efficient lamps and ballasts, Millenium Finite's specially designed optical system delivers independently certified, full cutoff performance while reducing energy consumption and waste. Finite's IP64 UL certification means it is impervious to dust and moisture. In addition, the impact resistant, U.V. stabilized injection molded polycarbonate housings provide full shielding and unmatched durability. Millenium Finite fixtures are so durable, in fact, they re covered by Kenall s exclusive Peace of Mind Lifetime Guarantee. Review our entire selection of Dark Sky luminaires and we think you ll agree Millenium Finite, Millenium Edge, and Herculux represents the lighting professional s best choice in IDA-Approved security lighting. Above: Millenium Finite's optical system is designed for full cutoff Dark Sky applications with no light trespass. Above: The new IDA Millenium Edge fixtures are ideal for soffit applications and provide the perfect complement to the wall-mounted Finite series. 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 3
millenium Finite Features millenium FINITE 15 ILLUSTRATED Housing/Door Available in two sizes: 15" (Finite 15 ) and 9" (Finite 9 ) Low or deep housing styles High impact resistant, U.V. stabilized injection molded polycarbonate Door supplied with detachable hinge One-piece closed cell "O" ring gasket Stainless steel tamper-resistant captive fasteners Available in black, white, and bronze standard finishes or custom colors Lens.187" clear polycarbonate (CFL).250" clear tempered glass (HID) photometry Available in Type 11 (lateral) and Type IV (forward throw) light distribution patterns Superior lighting uniformity and excellent spacing to mounting height ratios Full cutoff or uplight mounting styles Electrical Designed to accommodate the latest and most efficient lamps and ballasts listings IDA-Approved Dark-Sky Friendly IESNA-designated full cutoff UL and CUL listed for Wet Locations UL Classified IP64 Peace of Mind Lifetime Guarantee 4 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium FINITE housings Millenium Finite is available in two sizes 15 and 9 inches and with deep or low profiles to accommodate a variety of lamp packages from compact fluorescent to 175 watt HID. Consistent design elements throughout both sizes ensure complementary aesthetics. auxiliary emergency lighting The NFPA Life Safety Code requires exterior emergency lighting along a path of egress to ensure building occupants can exit and move to a safe location. The XDC option in the Millenium Finite 15 includes two adjustable MR16 supplementary lamps powered by an external 12- volt battery source when there is power interruption to the primary source. Millenium finite 15 millenium finite 9 Light Distribution Millenium Finite 15 full cutoff fixtures are available in a choice of two optic systems, Type II and Type IV. type 11 Type iv Mounting options In addition to the IDA-Approved Dark- Sky Friendly full cutoff series, Finite 15 and Finite 9 are available in uplighting models, suitable for applications such as the foyer below. EASY HOOK-AND-LOCK MOUNTING Finite is factory pre-wired and includes a gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to the wall or surface conduit adapter accessory, the hook-and-lock mechanism allows for quick mounting. 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 15 Photometric Performance FN15 DEEP PROFILE / HID / 175M / TYPE 11 Distribution / DOWNLIGHT wall mount a bcde f Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 10 12 14 a 7.00 4.89 3.57 b 5.00 3.47 2.55 c 2.00 1.39 1.02 d 1.00 0.69 0.51 e 0.50 0.35 0.26 f 0.20 0.14 0.10 Lamp: 175 Watt MH, 14000 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN15D-Type II-175M AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 4.97 13.24 1.13 4.41 11.77 3.31 68' x 20' Area 14' Mounting Height @ 56' spacings TYPICAL LAYOUT.00 6.00 10.00 14.00 18.00 22.00 26.00 30.00 34.00 38.00 42.00 46.00 50.00 54.00 58.00 62.00 66.00 2.00 9.28 13.24 9.28 10.01 8.33 4.77 1.97 1.26 1.13 1.26 1.97 4.77 8.33 10.01 9.28 13.24 9.28 6.00 9.66 11.36 9.67 9.76 7.98 5.49 2.62 1.39 1.16 1.39 2.62 5.49 7.98 9.76 9.67 11.36 9.66 10.00 6.43 6.86 6.44 7.12 7.78 6.63 4.33 2.34 1.77 2.34 4.33 6.63 7.78 7.12 6.44 6.86 6.43 14.00 2.76 2.67 2.77 2.89 4.05 4.75 4.57 3.71 2.81 3.71 4.57 4.75 4.05 2.89 2.77 2.67 2.76 18.00 1.40 1.28 1.41 1.48 1.64 2.09 2.39 2.58 2.32 2.58 2.39 2.09 1.64 1.48 1.41 1.28 1.40 FN15 DEEP PROFILE / HID / 175M / TYPE 1V Distribution / DOWNLIGHT wall mount a b cd Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 10 12 14 a 7.00 4.89 3.57 b 5.00 3.47 2.55 c 2.00 1.39 1.02 d 1.00 0.69 0.51 e 0.50 0.35 0.26 f 0.20 0.14 0.10 e f Lamp: 175 Watt MH, 14000 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN15D-Type IV-175M AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 4.43 13.51 1.07 4.12 12.59 3.34 60' x 32' Area 14' Mounting Height @ 42' spacings TYPICAL LAYOUT.00 6.00 10.00 14.00 18.00 22.00 26.00 30.00 34.00 38.00 42.00 46.00 50.00 54.00 58.00 2.00 6.15 9.10 9.53 7.80 4.54 2.22 1.37 1.15 1.37 2.22 4.54 7.80 9.53 9.10 6.15 6.00 9.22 12.65 13.51 11.35 7.05 3.75 1.74 1.38 1.74 3.75 7.05 11.35 13.51 12.65 9.22 10.00 8.08 10.21 10.54 9.39 6.76 3.80 2.07 1.54 2.07 3.80 6.76 9.39 10.54 10.21 8.08 14.00 6.47 7.56 7.74 7.32 5.81 3.69 2.14 1.63 2.14 3.69 5.81 7.32 7.74 7.56 6.47 18.00 4.49 4.96 4.99 4.87 4.14 3.06 2.02 1.64 2.02 3.06 4.14 4.87 4.99 4.96 4.49 22.00 2.89 3.14 3.16 3.13 2.82 2.30 1.81 1.55 1.81 2.30 2.82 3.13 3.16 3.14 2.89 26.00 1.78 1.91 1.93 1.93 1.84 1.64 1.44 1.35 1.44 1.64 1.84 1.93 1.93 1.91 1.78 30.00 1.11 1.18 1.21 1.22 1.20 1.15 1.08 1.07 1.08 1.15 1.20 1.22 1.21 1.18 1.11 6 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 15 Photometric Performance FN15 DEEP PROFILE / HID / 150S / TYPE 11 Distribution / DOWNLIGHT wall mount a bcde f Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 10 12 14 a 7.00 4.89 3.57 b 5.00 3.47 2.55 c 2.00 1.39 1.02 d 1.00 0.69 0.51 e 0.50 0.35 0.26 f 0.20 0.14 0.10 Lamp: 150 Watt HPS, 16000 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN15D-Type II-150S AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 5.24 12.26 1.02 5.14 12.02 3.75 68' x 20' Area 14' Mounting Height @ 60' spacings TYPICAL LAYOUT.00 6.00 10.00 14.00 18.00 22.00 26.00 30.00 34.00 38.00 42.00 46.00 50.00 54.00 58.00 62.00 66.00 2.00 12.26 12.26 10.40 11.04 7.62 3.34 1.53 1.14 1.04 1.14 1.53 3.34 7.62 11.04 10.40 12.26 12.26 6.00 12.23 12.23 11.13 10.27 7.83 4.34 1.93 1.21 1.02 1.21 1.93 4.34 7.83 10.27 11.13 12.23 12.23 10.00 7.63 7.63 7.71 8.62 8.44 6.09 3.60 1.86 1.38 1.86 3.60 6.09 8.44 8.62 7.71 7.63 7.63 14.00 2.97 2.97 3.33 3.69 5.14 5.30 4.65 2.88 2.16 2.88 4.65 5.30 5.14 3.69 3.33 2.97 2.97 18.00 1.46 1.46 1.65 1.66 2.02 2.44 2.68 2.29 1.93 2.29 2.68 2.44 2.02 1.66 1.65 1.46 1.46 FN15 LOW PROFILE / CFL / (2) 42P / DOWNLIGHT wall mount a bc de f Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 10 12 14 a 7.00 4.89 3.57 b 5.00 3.47 2.55 c 2.00 1.39 1.02 d 1.00 0.69 0.51 e 0.50 0.35 0.26 f 0.20 0.14 0.10 Lamp: Two 42 Watt PLT, 3200 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN15L-Type IV-42P-2 AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 3.51 7.84 1.00 3.51 7.83 1.97 48' x 24' Area 12' Mounting Height @ 30' spacings TYPICAL LAYOUT.00 6.00 10.00 14.00 18.00 22.00 26.00 30.00 34.00 38.00 42.00 46.00 2.00 3.68 5.51 5.90 4.82 2.80 1.58 1.58 2.80 4.82 5.90 5.51 3.68 6.00 4.06 6.42 6.83 5.52 2.90 1.61 1.61 2.90 5.52 6.83 6.42 4.06 10.00 4.98 7.22 7.84 6.33 3.90 2.12 2.12 3.90 6.33 7.84 7.22 4.98 14.00 3.69 4.52 4.72 4.37 3.17 2.16 2.16 3.17 4.37 4.72 4.52 3.69 18.00 2.02 2.41 2.51 2.41 1.99 1.54 1.54 1.99 2.41 2.51 2.41 2.02 22.00 1.05 1.24 1.29 1.27 1.14 1.00 1.00 1.14 1.27 1.29 1.24 1.05 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 7
millenium Finite 9 Photometric Performance FN9 DEEP PROFILE / CFL / (2) 32P / DOWNLIGHT wall mount a bcdef Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 8 10 12 a 7.00 4.48 3.08 b 5.00 3.20 2.20 c 2.00 1.28 0.88 d 1.00 0.64 0.44 e 0.50 0.32 0.22 f 0.20 0.13 0.08 Lamp: Two 32 Watt PLT, 2400 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN9D-32P-2 AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 6.17 12.82 1.56 3.96 8.23 3.67 12' x 12' Area 10' Mounting Height TYPICAL LAYOUT 1.00 3.00 5.00 7.00 9.00 11.00 1.00 7.70 10.77 12.82 12.82 10.77 7.70 3.00 7.78 10.38 12.18 12.18 10.38 7.78 5.00 6.17 7.61 8.61 8.61 7.61 6.17 7.00 4.07 4.67 5.08 5.08 4.67 4.07 9.00 2.59 2.81 2.92 2.92 2.81 2.59 11.00 1.56 1.65 1.72 1.72 1.65 1.56 FN9 DEEP PROFILE / HID / 70M / DOWNLIGHT wall mount a bcde f Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 8 10 12 a 7.00 4.48 3.08 b 5.00 3.20 2.20 c 2.00 1.28 0.88 d 1.00 0.64 0.44 e 0.50 0.32 0.22 f 0.20 0.13 0.08 Lamp: 70 Watt MH, 5300 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN9D-70M AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 6.80 16.19 1.28 5.33 12.68 5.07 12' x 12' Area 10' Mounting Height TYPICAL LAYOUT 1.00 3.00 5.00 7.00 9.00 11.00 1.00 9.35 12.25 16.19 16.19 12.25 9.35 3.00 9.66 12.63 16.10 16.10 12.63 9.66 5.00 7.15 8.53 9.34 9.34 8.53 7.15 7.00 3.92 3.75 3.68 3.68 3.75 3.92 9.00 2.02 2.01 1.95 1.95 2.01 2.02 11.00 1.33 1.33 1.28 1.28 1.33 1.33 8 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 9 Photometric Performance FN9 DEEP PROFILE / HID / 70S / DOWNLIGHT wall mount a bcde f Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 8 10 12 a 7.00 4.48 3.08 b 5.00 3.20 2.20 c 2.00 1.28 0.88 d 1.00 0.64 0.44 e 0.50 0.32 0.22 f 0.20 0.13 0.08 Lamp: 70 Watt HPS, 6300 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN9D-70S AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 8.57 20.39 1.61 5.33 12.68 6.39 12' x 12' Area 10' Mounting Height TYPICAL LAYOUT 1.00 3.00 5.00 7.00 9.00 11.00 1.00 11.78 15.43 20.39 20.39 15.43 11.78 3.00 12.17 15.92 20.29 20.29 15.92 12.17 5.00 9.01 10.75 11.77 11.77 10.75 9.01 7.00 4.94 4.73 4.64 4.64 4.73 4.94 9.00 2.55 2.53 2.46 2.46 2.53 2.55 11.00 1.68 1.68 1.61 1.61 1.68 1.68 FN9 LOW PROFILE / CFL / 32P / DOWNLIGHT wall mount Wall Mounting Height (in feet) Horizontal Plane Isofootcandle Line 8 9 10 a 1.00 0.79 0.64 b 0.50 0.40 0.32 c 0.20 0.16 0.13 d 0.10 0.08 0.06 a bcd Lamp: 32 Watt PLT, 2400 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. FN9L-32P-1 AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 4.53 10.26 1.19 3.81 8.63 2.83 12' x 10' Area 8' Mounting Height TYPICAL LAYOUT 1.00 3.00 5.00 7.00 9.00 11.00 1.00 5.05 7.76 10.26 10.26 7.76 5.05 3.00 5.04 7.02 8.88 8.88 7.02 5.04 5.00 3.50 4.37 5.17 5.17 4.37 3.50 7.00 2.14 2.37 2.61 2.61 2.37 2.14 9.00 1.19 1.25 1.34 1.34 1.25 1.19 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 9
millenium Finite 15 Specification Sheets FN15L SERIES 15" full cutoff, low profile wall mount 84 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 9.5" 15" 12" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. IESNA-designated full cut-off. IDA-Approved. Cross Section Mounting Holes Surface Adapter (SA) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) 9.52" (242mm) 4.75" (121mm) 6.25" (159mm) 15.00" (381mm) 12.00" (305mm) 6.25" (159mm) 13.50" (343mm) 7.00" (178mm) Series Optic lens lamp lamp Accessory System Type Type Qty FN15L Optic System 2 Type II 4 Type IV Polycarbonate (STD w/cfl) 7.187" Clear Tempered Glass (STD w/hid) A.250" Clear Specified Lens SL Specified Lens Lamp (Type/Qty/Ballast//Starting Temp) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 42P 42 Watt PLT (1,2/EB/120,277,347/0 F) 50M 50 Watt MH (1/HPF/120,277,347/-20 F) 50S 50 Watt HPS (1/HPF/120,277,347/-40 F) 70M 70 Watt MH (1/HPF,EB/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) XAC Auxiliary Emergency Lighting (120V AC) XDC Auxiliary Emergency Lighting (12V DC) FS Single Fuse & Holder PH Phillips Head Fasteners Accessory SA Die-Cast Surface Adapter MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only 10 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 15 Specification Sheets FN15D SERIES 15" full cutoff, deep profile wall mount 84 Watt Maximum - Compact Fluorescent 175 Watt Maximum - HID Height Width Depth 9.5" 15" 13.5" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. IESNA-designated full cut-off. IDA-Approved. Cross Section Mounting Holes Surface Adapter (SA) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) 9.52" (242mm) 4.75" (121mm) 6.25" (159mm) 15.00" (381mm) 13.50" (343mm) 6.25" (159mm) 15.00" (381mm) 7.00" (178mm) Series Optic lens lamp lamp Accessories System Type Type Qty FN15D Optic System 2 Type II 4 Type IV Polycarbonate (STD w/cfl) 7.187" Clear Tempered Glass (STD w/hid) A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 42P 42 Watt PLT (1,2/EB/120,277,347/0 F) 100M 100 Watt MH (1/HPF/120,277,347/-20 F) 100S 100 Watt HPS (1/HPF/120,277,347/-40 F) 150M 150 Watt MH (1/CWA/120,277,347/-20 F) 150S 150 Watt HPS (1/HPF/120,277,347/-40 F) 175M 175 Watt MH (1/CWA/120,277,347/-20 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only 2C Two Circuit Wiring (2 only) (n/a with EL Option) XAC Auxiliary Emergency Lighting (120V AC) XDC Auxiliary Emergency Lighting (12V DC) BPC Photo Control - Button Type (120/277V only) EL One-Lamp Indoor Battery Pack (32ºF) CEL One Lamp Emergency Pack (0 F) FS Single Fuse & Holder PH Phillips Head Fastener QR Quartz Restrike System for maximum 100W DC Bay Quartz Lamp (see 9009) Accessories 9009 100 Watt DC Bay Quartz Lamp SA Die-Cast Surface Adapter 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 11
millenium Finite 9 Specification Sheets FN9L SERIES 9" full cutoff, low profile wall mount 52 Watt Maximum - Compact Fluorescent Height Width Depth 9" 9.25" 9" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD). Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. IESNA-designated full cut-off. IDA-Approved. Cross Section Mounting Holes Surface Adapter (SA) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) 8.86" (225mm) 4.75" (121mm) 6.25" (159mm) 9.31" (236mm) 9.15" (232mm) 6.25" (159mm) 10.65" (270mm) 7.00" (178mm) Series lens lamp lamp Accessory Type Type Qty FN9L Polycarbonate (STD w/cfl) 7.187" Clear Tempered Glass (STD w/hid) A.250" Clear Specified Lens SL Specified Lens Lamp (Type/Qty/Ballast//Starting Temp) 26P 26 Watt PLT (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1/EB/120,277,347/0 F) FS Single Fuse & Holder PH Phillips Head Fasteners Accessory SA Die-Cast Surface Adapter MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) DV 120/277 Volts 12 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 9 Specification Sheets FN9D SERIES 9" full cutoff, deep profile wall mount 64 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 9" 9.25" 10.5" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. IESNA-designated full cut-off. IDA-Approved. Cross Section Mounting Holes Surface Adapter (SA) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) 8.86" (225mm) 4.75" (121mm) 6.25" (159mm) 9.31" (236mm) 10.65" (271mm) 6.25" (159mm) 12.15" (309mm) 7.00" (178mm) Series lens lamp lamp Accessory Type Type Qty FN9D Polycarbonate (STD w/cfl) 7.187" Clear Tempered Glass (STD w/hid) A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 26P 26 Watt PLT (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 50M 50 Watt MH (1/HPF/120,277,347/-20 F) 50S 50 Watt HPS (1/HPF/120,277,347/-40 F) 70M 70 Watt MH (1/HPF,EB/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only BPC Photo Control - Button Type (120/277V only) EL One-Lamp Indoor Battery Pack (32ºF) FS Single Fuse & Holder PH Phillips Head Fasteners Accessory SA Die-Cast Surface Adapter 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 13
millenium Finite 15 Specification Sheets FNU15L SERIES 15" uplight, low profile wall mount 64 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 9.5" 15" 12" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. Cross Section Mounting Holes Surface Adapter (SA) 15.00" (381mm) 12.00" (305mm) 6.25" (159mm) 13.50" (343mm) 7.00" (178mm) 9.52" (242mm) 4.75" (121mm) 6.25" (159mm) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) Series Optic lens lamp lamp Accessory System Type Type Qty FNU15L Optic System 2 Type II 4 Type IV NW Narrow Wall Wash Tempered Glass A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 70M 70 Watt MH (1/HPF/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only FS Single Fuse & Holder PH Phillips Head Fastener Accessory SA Die-Cast Surface Adapter 14 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 15 Specification Sheets FNU15D SERIES 15" uplight, deep profile wall mount 84 Watt Maximum - Compact Fluorescent 100 Watt Maximum - HID Height Width Depth 9.5" 15" 13.5" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. Cross Section Mounting Holes Surface Adapter (SA) 15.00" (381mm) 13.50" (343mm) 6.25" (159mm) 15.00" (381mm) 7.00" (178mm) 9.52" (242mm) 4.75" (121mm) 6.25" (159mm) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) Series Optic lens lamp lamp Accessory System Type Type Qty FNU15D Optic System 2 Type II 4 Type IV NW Narrow Wall Wash Tempered Glass A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 42P 42 Watt PLT (1,2/EB/120,277,347/0 F) 100M 100 Watt MH (1/HPF/120,277,347/-20 F) 100S 100 Watt HPS (1/HPF/120,277,347/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only FS Single Fuse & Holder PH Phillips Head Fastener Accessory SA Die-Cast Surface Adapter 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 15
millenium Finite 9 Specification Sheets FNU9L SERIES 9" uplight, low profile wall mount 52 Watt Maximum - Compact Fluorescent Height Width Depth 9" 9.25" 9" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD). Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. Cross Section Mounting Holes Surface Adapter (SA) 9.31" (236mm) 9.15" (232mm) 6.25" (159mm) 10.65" (270mm) 7.00" (178mm) 8.86" (225mm) 4.75" (121mm) 6.25" (159mm) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) Series lens lamp lamp Accessory Type Type Qty FNU9L Tempered Glass A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 26P 26 Watt PLT (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1/EB/120,277,347/0 F) DV 120/277 Volts FS Single Fuse & Holder PH Phillips Head Fasteners Accessory SA Die-Cast Surface Adapter 16 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Finite 9 Specification Sheets FNU9D SERIES 9" uplight, deep profile wall mount 64 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 9" 9.25" 10.5" Type Housing: High-impact resistant, U.V. stabilized injection molded polycarbonate. Ballast housing marine-grade die-cast aluminum construction. Door: High-impact resistant, U.V. stabilized injection molded polycarbonate with detachable hinge. Secured to housing with four (4) captive, recessed POSIGRIP (or optional Phillips head) stainless steel screws. Lens sealed with closed-cell silicone gasket and secured to door frame with heavy gauge stainless steel brackets. Electrical: Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Closed cell, silicone O ring gasket seals joint between polycarbonate housing and die-cast aluminum ballast housing and joint between polycarbonate housing and polycarbonate lens frame assembly. Thick gauge, die-cut, closed cell neoprene with self-adhesive gasket seals joint between housing and mounting surface or accessory surface conduit adapter. Installation: is factory pre-wired and includes gasketed, 16-gauge stainless steel quick mounting plate. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) or accessory surface conduit adapter, allows quick mounting with hook-and-lock mechanism. Quick mounting plate bolts to wall (fasteners by other), fixture attaches to mounting plate with two (2) captive POSIGRIP (or optional Phillips head) screws, which are concealed but accessible from bottom. Surface Conduit Adapter (Accessory): Marine-grade die-cast aluminum construction includes die-cut gaskets and two ¾" threaded connection ports. Once four-point mounted to wall (required for Peace of Mind Lifetime Guarantee ) allows same quick mounting (hook-and-lock) capability as described in the Installation section above. Wet Locations. UL Classified IP64. Cross Section Mounting Holes Surface Adapter (SA) 9.31" (236mm) 10.65" (271mm) 6.25" (159mm) 12.15" (309mm) 7.00" (178mm) 8.86" (225mm) 4.75" (121mm) 6.25" (159mm) (2) 3/4" NPS-2 sides (Plugged) (1) 3/4" NPS (Not Plugged) Series lens lamp lamp Accessory Type Type Qty FNU9D Tempered Glass A.250" Clear Specified Lens SL Specified Lens MB Matte Black MW Matte White DB Dark Bronze CC Custom Color (Consult factory) Lamp (Type/Qty/Ballast//Starting Temp) 26P 26 Watt PLT (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 50M 50 Watt MH (1/HPF/120,277,347/-20 F) 50S 50 Watt HPS (1/HPF/120,277,347/-40 F) 70M 70 Watt MH (1/HPF,EB/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only FS Single Fuse & Holder PH Phillips Head Fasteners Accessory SA Die-Cast Surface Adapter 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 17
millenium Edge Dark Sky Luminaires Cutoff lighting ideal for soffit applications The Millenium Edge, a flat lens version of the popular Millenium Rounds series, offers IDA Dark- Sky compliant luminaires for soffit mounted applications. In addition to IDA-Approved exterior use, Millenium Edge is also the perfect solution for interior low ceilings. The low 3" profile of the MR13FFL saves space and clears obstructions while surface mounting offers easier installation. Millenium Edge is available in 13 or 17-inch sizes and can be specified with a range of lamp and ballast choices (see pages 20-25). Millenium Edge fixtures will look great for years to come whether installed indoors or out. The series is constructed of environmental and impact resistant materials marine grade aluminum housings, U.V.-resistant polycarbonate lens and lens base, stainless steel fasteners, and extruded closed-cell gasketing. Backed by Kenall s Peace of Mind Lifetime Guarantee against breakage, Millenium Edge is the right choice for soffit or low ceiling applications. Housing Available in two sizes: 13" or 17" Low, deep, or semi-recessed housing styles Die-cast marine grade aluminum Integral ballast heat sink Integral gasket channel One-piece closed cell "O" ring gasket Stainless steel tamper-resistant captive fasteners 1,000-hour salt spray tested finish Available in black or white standard finishes or optional dark bronze finish Lens polycarbonate One-piece injection molded pearlescent U.V. resistant material Lens conceals lockup fastener Lens Base Injection molded, U.V. resistant polycarbonate (low and deep housings) Die-cast marine grade aluminum (semi-recessed housings) Close tolerance mating with baseplate Integral gasket channel for lens One-piece closed cell "O" ring gasket Electrical Designed to accommodate the latest and most efficient lamps and ballasts U.V. shielded metal halide lamps Reflector 92% reflectivity Listings IDA-Approved Dark-Sky Friendly IESNA-designated full cutoff UL and CUL listed for Wet Locations UL Classified IP64 Peace of Mind Lifetime Guarantee signage applications In addition to an attractive cutoff lighting solution, Millenium Edge's flat lens is ideally suited for signage use when wall mounted. Signage is provided on interchangeable internal panels. Consult factory for ordering information. 18 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Edge Photometric Performance mr13ff DEEP PROFILE / CFL / (2) 26Q / DOWNLIGHT ceiling CEILING Mounting Height (in feet) Horizontal Plane Isofootcandle Line 7 8 9 10 a 6.53 5.00 3.95 3.20 b 2.61 2.00 1.58 1.28 c 1.31 1.00 0.79 0.64 d 0.65 0.50 0.40 0.32 e 0.26 0.20 0.16 0.13 f 0.13 0.10 0.08 0.06 f e d c b a Lamp: Two 26 Watt Quad, 1800 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. MR13FFD-PP-26Q-2 AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 2.14 3.69 1.07 1.99 3.44 0.76 26' x 16' Area 10' Mounting Height @ 20' spacings TYPICAL LAYOUT.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 2.00 1.83 1.86 1.70 1.42 1.19 1.07 1.07 1.19 1.42 1.70 1.86 1.83 4.00 2.61 2.65 2.33 1.89 1.53 1.33 1.33 1.53 1.89 2.33 2.65 2.61 6.00 3.35 3.38 2.93 2.31 1.78 1.50 1.50 1.78 2.31 2.93 3.38 3.35 8.00 3.65 3.69 3.16 2.45 1.86 1.55 1.55 1.86 2.45 3.16 3.69 3.65 10.00 3.35 3.38 2.93 2.31 1.78 1.50 1.50 1.78 2.31 2.93 3.38 3.35 12.00 2.61 2.65 2.33 1.89 1.53 1.33 1.33 1.53 1.89 2.33 2.65 2.61 14.00 1.83 1.86 1.70 1.42 1.19 1.07 1.07 1.19 1.42 1.70 1.86 1.83 mr17ff semi-recessed / HID / 70M / DOWNLIGHT ceiling f e d c b a CEILING Mounting Height (in feet) Horizontal Plane Isofootcandle Line 7 8 9 10 a 6.53 5.00 3.95 3.20 b 2.61 2.00 1.58 1.28 c 1.31 1.00 0.79 0.64 d 0.65 0.50 0.40 0.32 e 0.26 0.20 0.16 0.13 f 0.13 0.10 0.08 0.06 Lamp: 70 Watt MH, 5300 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. MR17FFR-PP-70M AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 3.16 6.06 1.20 2.64 5.06 1.50 36' x 16' Area 12' Mounting Height @ 30' spacings TYPICAL LAYOUT.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 32.00 34.00 2.00 3.67 3.69 3.42 2.88 2.31 1.84 1.50 1.27 1.20 1.27 1.50 1.84 2.31 2.88 3.42 3.69 3.67 4.00 4.74 4.76 4.39 3.63 2.83 2.16 1.73 1.43 1.34 1.43 1.73 2.16 2.83 3.63 4.39 4.76 4.74 6.00 5.92 5.94 5.10 4.24 3.18 2.42 1.84 1.54 1.43 1.54 1.84 2.42 3.18 4.24 5.10 5.94 5.92 8.00 6.04 6.06 5.42 4.42 3.39 2.50 1.90 1.58 1.48 1.58 1.90 2.50 3.39 4.42 5.42 6.06 6.04 10.00 5.66 5.68 5.19 4.23 3.27 2.42 1.83 1.53 1.43 1.53 1.83 2.42 3.27 4.23 5.19 5.68 5.66 12.00 4.76 4.78 4.36 3.56 2.85 2.14 1.70 1.43 1.34 1.43 1.70 2.14 2.85 3.56 4.36 4.78 4.76 14.00 3.63 3.64 3.39 2.83 2.30 1.81 1.45 1.27 1.20 1.27 1.45 1.81 2.30 2.83 3.39 3.64 3.63 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 19
millenium Edge Specification Sheets MR13FFL SERIES 13" Round Flat Face ceiling/wall Mount/Surface ADA Compliant 26 Watt Maximum - Compact Fluorescent Height Width Depth 13.2" 13.2" 2.7" Type Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: High impact resistant, injection molded polycarbonate. Lens base shields lamp from viewing angles. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Baseplate: Marine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes, one wireway hole Cross Section and temporary junction box mounting breakouts. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Reflector: Full reflector/wire cover 92% reflectivity. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277 and dual voltage ballasts high power factor (<10% THD). Gasketing: Die-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone O ring gaskets positioned and friction secured in gasket channels of lens base, baseplate and optional surface adapter. Surface Adapter - SA (Side & Back View) (4) 1/2" NPT - 4 sides (Plugged) (1) 3/4" NPT (Not Plugged) Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee 5.00" (127mm) 5.00" (127mm) 13.20" (335mm) 2.71" (68mm) 5.00" (127mm) 5.31" (135mm) 8.00" (203mm) Series Lens lamp lamp Accessories Type Type Qty MR13FFL PP PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) Lamp Type (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120/32 F) 21D 21 Watt 2D (1/EB/120,277/0 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only EL One-Lamp WL Emergency Pack (32 F) with Die-Cast Surface Adapter (SA) - Non ADA EL/SR One-Lamp WL Emergency Pack (32 F) with Semi-Recessed Backbox - ADA Compliant FS Single Fuse & Holder RMP Retrofit Mounting Plate (See Tech Sheet) WMR Wiremold 500 Ready (See Tech Sheet) NAT Natatorium Environment Option Accessories BPC Photo Control - Shielded Button Type (Requires Surface Adapter) SA Die-Cast Surface Adapter - Non ADA 9500 POSIGRIP Screwdriver 20 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Edge Specification Sheets MR13FFD SERIES 13" Round Flat Face Ceiling/Wall Mount/Surface 52 Watt Maximum - Compact Fluorescent 50 Watt Maximum - HID Height Width Depth 13.2" 13.2" 5.3" Type Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: High impact resistant, injection molded polycarbonate. Lens base shields lamp from viewing angles. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Housing: Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points. Standard black or Cross Section white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Reflector: Compact Fluorescent: Full reflector/ wire cover 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Die-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone O ring gaskets positioned and friction secured in gasket channels of lens base and housing. Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. For wall mount installation, mount lamp base up on all HID lamp sources. (4) 1/2" NPT - 4 sides (Plugged) (1) 3/4" NPT (Not Plugged) 5.00" (127mm) 13.20" (335mm) 5.31" (135mm) 8.00" (203mm) Series Lens lamp lamp Accessories Type Type Qty MR13FFD PP PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) Lamp (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1/EB/120,277,347/0 F) 35S 35 Watt HPS (1/HPF/120,277/-40 F) 50S 50 Watt HPS (1/HPF/120,277,347/-40ºF) 50M 50 Watt MH (1/HPF/120,277,347/-20ºF) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only EL FS QR QRC QS NAT One-Lamp WL Emergency Pack (32 F) (n/a with two 26Q lamps) Single Fuse & Holder Quartz restrike system for maximum 75-Watt DC bay quartz lamp (see C-0796) Hot/Cold Quartz restrike (n/a with 35S lamp) Quartz socket only Natatorium Environment Option Accessories BPC Photo Control - Shielded Button Type C-0796 75 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver UV shielding lamp supplied 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 21
millenium Edge Specification Sheets mr13ffr SERIES Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: Marine grade die-cast aluminum. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Housing (Series PP,ND,CO): Die-cast aluminum with integral heat sinks. Marine grade aluminum housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. 13" Round Flat face Ceiling/Wall Mount/Semi-recessed ADA Compliant 52 Watt Maximum - Compact Fluorescent 35 Watt Maximum - HID Height/ Recessed Exposed Series Width Depth Depth MR13ffr/pp 14.0" 4.1" 1.6" mr13ffr/nd 14.0" 4.1" 1.6" mr13ffr/nl 14.0" 3.8" 1.6" mr13ffr/cc 14.0" 3.8" 1.6" mr13ffr/co 14.0" 4.1" 1.6" Housing (Series NL,CC): 18-gauge CRS housing with marine grade cast aluminum housing flange. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Reflector: Compact Fluorescent: Full reflector/ wire cover 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Shock absorbing, medium base lamp sockets provided for HID lamps. Cross Section Series PP,ND, CO (Side & Back View) Series NL, CC (Side & Back View) Type Gasketing: Closed cell, silicone O ring gaskets positioned in gasket channels of lens base and housing. Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: See Technical Sheets for semi-recessed installation details, mounting accessories and rough-in box availability. (2) 3/4" NPT - Top & Bottom (Plugged) (1) 3/4" NPT (Not Plugged) (2) 7/8" Dia. KO 7.00" (178mm) (4) 5/16" Dia. KO 9.00" (229mm) 6.40" (163mm) 8.88" (225mm) (2)7/8" Dia. KO 14.00" (355mm) 1.61" (41mm) 4.06" (103mm) 1.61" (41mm) 3.84" (98mm) 8.88" (225mm) Series Mounting Lens lamp lamp Accessories Type Type Type Qty mr13ffr Mounting Type PP Pour-in-Place or Masonry ND Non IC (Deep Profile) NL Non IC (Low Profile) CC** Canopy (Covered Top) CO** Canopy (Open Top) PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) PP Lamp (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1/EB/120,277,347/0 F) 35S 35 Watt HPS (1/HPF/120/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only EL FS QR QS NAT One-Lamp WL Emergency Pack (32 F) (n/a with two 26Q lamps) Single Fuse & Holder Quartz restrike system for maximum 75-Watt DC bay quartz lamp (see C-0796) Quartz socket only Natatorium Environment Option Accessories C-0796 75 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver ** Ceiling Mounting Only 22 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Edge Specification Sheets MR17FFL SERIES 17" Round Flat Face ceiling/wall mount/surface ADA Compliant 52 Watt Maximum - Compact Fluorescent Height Width Depth 17.6" 17.6" 3.9" Type Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: High impact resistant, injection molded polycarbonate.lens base shields lamp from viewing angles. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Baseplate: Marine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting breakouts. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Reflector: Full reflector/wire cover 92% reflectivity. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10%THD). Gasketing: Die-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone O ring gaskets positioned and friction secured in gasket channels of lens base, baseplate and optional surface adapter. Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. For wall mount installation, mount lamp base up on all HID lamp sources. Cross Section Surface Adapter - SA (Side & Back View) (4) 3/4" NPT - 4 sides (Plugged) (1) 3/4" NPT (Not Plugged) 7.75" (197mm) 7.00" (178mm) 17.64" (448mm) Series lens lamp lamp Accessories Type Type Qty MR17FFL PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) 3.89" (99mm) PP 7.75" (197mm) 6.50" (165mm) Lamp (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2/EB/120,277,347/0 F) 28D 28 Watt 2D (1/EB/120,277/-5 F) 38D 38 Watt 2D (1/EB/120,277/-5 F) 10.00" (254mm) EL One-Lamp WL Emergency Pack (32 F) with Die-Cast Surface Adapter (SA) - Non ADA EL/SR One-Lamp WL Emergency Pack (32 F) with Semi-Recessed Backbox - ADA Compliant FS Single Fuse & Holder WMR Wiremold 500 Ready (See Tech Sheet) NAT Natatorium Environment Option 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only Accessories BPC Photo Control - Shielded Button Type (Requires Surface Adapter) SA Die-Cast Surface Adapter 9500 POSIGRIP Screwdriver 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 23
millenium Edge Specification Sheets MR17FFD SERIES 17" ROUND FLAT FACE CEILING/WALL MOUNT/SURFACE 84 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 17.6" 17.6" 6.5" Type Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: High impact resistant, injection molded polycarbonate. Lens base shields lamp from viewing angles. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Housing: Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points. Standard black or Cross Section (4) 3/4" NPT - 4 sides (Plugged) (1) 3/4" NPT (Not Plugged) white exterior urethane powder coat finished 5- step pre-treatment. Dark bronze optional finish. Reflector: Compact Fluorescent: Full reflector/ wire cover 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Gasketing: Die-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone O ring gaskets positioned and friction secured in gasket channels of lens base and housing. Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. For wall mount installation, mount lamp base up on all HID lamp sources. 7.00" (177.8mm) 17.64" (448mm) 6.50" (165mm) 10.00" (254mm) Series Lens lamp lamp Accessories Type Type Qty MR17FFD PP PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) Lamp (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2,3/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2,3/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2,3/EB/120,277,347/0 F) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 42P 42 Watt PLT (1,2/EB/120,277,347/0 F) 50S 50 Watt HPS (1/HPF/120,277/-40ºF) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 50M 50 Watt MH (1/HPF/120,277,347/-20ºF) 70M 70 Watt MH (1/HPF/120,277,347/-20 F) 3 Three Lamps 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only EL One-Lamp WL Emergency Pack (32 F) (n/a with three 26Q or two 42P lamps) FS Single Fuse & Holder QR Quartz restrike system for maximum 100 Watt DC bay quartz lamp (see 9009) QRC Hot/Cold Quartz restrike QS Quartz socket only NAT Natatorium Environment Option Accessories BPC Photo Control - Shielded Button Type 9009 100 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver UV shielding lamp supplied 24 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
millenium Edge Specification Sheets mr17ffr SERIES Lens: U.V. stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive POSIGRIP fastener. Lens Base: Marine grade die-cast aluminum. Standard impact resistant finishes black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish. Housing (Series PP,ND,CO): Die-cast aluminum with integral heat sinks. Marine grade aluminum housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Cross Section 17" round flat Face ceiling/wall mount/semi-recessed ADA Compliant 84 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height/ Recessed Exposed Series Width Depth Depth mr17ffr/pp 18.2" 4.9" 1.8" mr17ffr/nd 18.2" 4.9" 1.8" mr17ffr/nl 18.2" 3.8" 1.8" mr17ffr/cc 18.2" 3.8" 1.8" mr17ffr/co 18.2" 4.9" 1.8" Housing (Series NL,CC): 18-gauge CRS housing with marine grade cast aluminum housing flange. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior urethane powder coat finished 5-step pre-treatment. Dark bronze optional finish. Reflector: Compact Fluorescent: Full reflector/ wire cover 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum. Electrical: Fluorescent magnetic ballasts 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10% THD), HID ballasts high power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. Surface Adapter (SA) Type Gasketing: Closed cell, silicone O ring gaskets positioned in gasket channels of lens base and housing. Hardware: One stainless steel POSIGRIP fastener. Wet Locations (listing includes Emergency Battery Pack EL option). UL Classified IP64 (E185326). IDA-Approved. Installation: See Technical Sheets for semi-recessed installation details, mounting accessories and rough-in box availability. (2) 3/4" NPT - Top & Bottom (Plugged) (1) 3/4" NPT (Not Plugged) (2) 7/8" Dia. KO 10.00" (254mm) (4) 5/16" Dia. KO 12.38" (314mm) 9.50" (241mm) 12.19" (310mm) (2) 7/8" Dia. KO 18.20" (462mm) 1.78" (45mm) 4.84" (123mm) 1.78" (45mm) 3.81" (97mm) 12.18" (309mm) Series Mounting Lens lamp lamp Accessories Type Type Type Qty mr17ffr pp Mounting Type PP Pour-in-Place or Masonry ND Non IC (Deep Profile) NL Non IC (Low Profile) CC** Canopy (Covered Top) CO** Canopy (Open Top) PP Pearlescent Polycarbonate MB Matte Black (Standard) MW Matte White (Standard) DB Dark Bronze (Optional) ** Ceiling Mounting Only UV shielding lamp supplied Lamp (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (1,2/EB/120,277,347/0 F) 42P 42 Watt PLT (1,2/EB/120,277,347/0 F) 50S 50 Watt HPS (1/HPF/120,277/-40ºF) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 50M 50 Watt MH (1/HPF/120,277,347/-20ºF) 70M 70 Watt MH (1/HPF/120,277,347/-20 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only EL One-Lamp WL Emergency Pack (32 F) (n/a with two 42P lamps) FS Single Fuse & Holder QR Quartz restrike system for maximum 100 Watt DC bay quartz lamp (see 9009) QRC Hot/Cold Quartz restrike QS Quartz socket only NAT Natatorium Environment Option Accessories 9009 100 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 25
Herculux Dark Sky Luminaires Dark Sky shield Provides Full-Cutoff Lighting With the addition of the IDA- Approved fully shielded H99DS and H1212DS series to the Herculux family, Kenall introduces institutional fixtures to its breadth of IDA Dark Sky-compliant selections. The Herculux fixture series includes a host of outstanding features, from housings fabricated from heavy-duty, die-cast marine grade aluminum to optical systems with a choice of the most energy-efficient lamp and ballast combinations on the market. Factor in Kenall s exclusive Peace of Mind Lifetime Guarantee against breakage and it s easy to see why Herculux represents the smart choice in IDA-Approved Dark- Sky Friendly institutional high abuse lighting. Herculux Dark Sky fixtures can be wall mounted when specified with the arm bracket (HRZ option). Housing Available in two sizes: 13"x13" (H99DS) and 17"x17" (H1212DS) Low, medium, or deep housing styles Die-cast marine grade aluminum (medium and deep housings) Three threaded conduit entryways (medium and deep housings) One-piece closed cell "O" ring gasket Stainless steel tamper-resistant captive fasteners 1,000-hour salt spray tested finish Available in dark bronze standard finish, optional finishes, or custom colors Lens polycarbonate One-piece injection molded pearlescent or clear prismatic High-efficiency, U.V. resistant material Uniform nominal.125" thickness Housing STYLES shield polycarbonate One-piece injection molded U.V. resistant material es to match housing Electrical Designed to accommodate the latest and most efficient lamps and ballasts U.V. shielded metal halide lamps Reflector High-efficiency textured aluminum 92% reflectivity listings IDA-Approved Dark-Sky Friendly IESNA-designated full cutoff UL and CUL listed for Wet Locations Peace of Mind Lifetime Guarantee low Housing Medium Housing Deep Housing 26 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
Herculux Photometric Performance H99DS medium profile / CFL / 32P / DOWNLIGHT ceiling Ceiling Mounting Height (in feet) Horizontal Plane Isofootcandle Line 7 8 9 10 a 2.61 2.00 1.58 1.28 b 1.31 1.00 0.79 0.64 c 0.65 0.50 0.40 0.32 d 0.26 0.20 0.16 0.13 e 0.13 0.10 0.08 0.06 e d c b a Lamp: 32 Watt PLT, 2400 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. H99DSM-PP-32P-1 AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 1.80 2.60 1.02 1.76 2.55 0.43 26' x 16' Area 10' Mounting Height @ 20' spacings TYPICAL LAYOUT.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 2.00 1.48 1.52 1.42 1.26 1.10 1.02 1.02 1.10 1.26 1.42 1.52 1.48 4.00 1.94 1.98 1.84 1.61 1.42 1.30 1.30 1.42 1.61 1.84 1.98 1.94 6.00 2.33 2.37 2.22 1.93 1.67 1.53 1.53 1.67 1.93 2.22 2.37 2.33 8.00 2.56 2.60 2.41 2.09 1.79 1.64 1.64 1.79 2.09 2.41 2.60 2.56 10.00 2.49 2.53 2.33 2.01 1.73 1.58 1.58 1.73 2.01 2.33 2.53 2.49 12.00 2.15 2.19 2.01 1.75 1.53 1.39 1.39 1.53 1.75 2.01 2.19 2.15 14.00 1.70 1.73 1.61 1.42 1.24 1.13 1.13 1.24 1.42 1.61 1.73 1.70 H1212DS deep profile / HID / 70M / DOWNLIGHT ceiling ceiling Mounting Height (in feet) Horizontal Plane Isofootcandle Line 7 8 9 10 a 6.53 5.00 3.95 3.20 b 2.61 2.00 1.58 1.28 c 1.31 1.00 0.79 0.64 d 0.65 0.50 0.40 0.32 e 0.26 0.20 0.16 0.13 f 0.13 0.10 0.08 0.06 f e d c b a Lamp: 70 Watt MH, 5300 Lumens Grid lines in units of mounting height STATISTICAL AREA SUMMARY Catalog No. H1212DSD-C-70M AVE MAX MIN AVE/ MAX/ STD. STAT AREA FTC FTC FTC MIN MIN DEV. Calc Grid @ 0' 2.61 4.87 1.06 2.46 4.59 1.17 36' x 16' Area 10' Mounting Height @ 30' spacings TYPICAL LAYOUT.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 32.00 34.00 2.00 3.03 3.04 2.85 2.52 2.07 1.61 1.30 1.14 1.09 1.14 1.30 1.61 2.07 2.52 2.85 3.04 3.03 4.00 3.87 3.88 3.54 3.03 2.44 1.83 1.44 1.24 1.18 1.24 1.44 1.83 2.44 3.03 3.54 3.88 3.87 6.00 4.70 4.72 4.06 3.38 2.72 1.98 1.52 1.31 1.24 1.31 1.52 1.98 2.72 3.38 4.06 4.72 4.70 8.00 4.86 4.87 4.31 3.54 2.73 2.01 1.54 1.32 1.26 1.32 1.54 2.01 2.73 3.54 4.31 4.87 4.86 10.00 4.62 4.63 4.12 3.41 2.71 1.98 1.51 1.30 1.23 1.30 1.51 1.98 2.71 3.41 4.12 4.63 4.62 12.00 3.78 3.79 3.56 3.06 2.41 1.83 1.41 1.22 1.17 1.22 1.41 1.83 2.41 3.06 3.56 3.79 3.78 14.00 3.07 3.08 2.83 2.49 2.01 1.56 1.25 1.10 1.06 1.10 1.25 1.56 2.01 2.49 2.83 3.08 3.07 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 27
Herculux Specification Sheets H99DSL SERIES ceiling Mount/surface 18 Watt Maximum - Compact Fluorescent 75 Watt Maximum - Incandescent Height Width Depth 13" 13" 4.5" Type Lens: One-piece wraparound lens (U.V. stabilized, high impact, virgin injection molded polycarbonate). Internal-prismatic refractor. Nominal thickness.125". Housing: 12-gauge aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Provided with four-point mounting holes and one wireway hole - see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish - 5 step pretreatment. Note: For surface conduit applications, see H99DSM Series. Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Electrical: Electronic ballasts high power factor. Magnetic ballasts normal power factor standard. See for power factor corrected ballasts. Gasket: Die-cut closed cell neoprene gasket seals housing to mounting surface. Refractor inset into housing and sealed with one O ring closed cell silicone gasket. Hardware: Four captive stainless steel POSIG- RIP fasteners secure refractor/visor to housing. Shoulder design and washer prevent refractor/visor stress due to over torquing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. Cross Section 9.00" (229mm) back Mounting View 6.38" (162mm) 4.14 (105mm) 3.82" (97mm) 9.00" (229mm) 6.38" (162mm) 13.00" (330mm) 9.00" (229mm) (4).28" Dia. Mounting Holes Series Lens lamp lamp Accessories Type Type Qty H99DSL PP Pearlescent Polycarbonate C Clear Prismatic DB MB MW LG SL FG CC Dark Bronze (Standard) Matte Black (Optional) Matte White (Optional) Grey (Optional) Silver (Optional) Forest Green (Optional) Custom Color (Consult factory) Lamp Type (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 9 9 Watt Twin (1/MB/120,277/0 F) 13 13 Watt Twin (1/MB/120,277/32 F) 13Q 13 Watt Quad (1/EB/120,277,347/0 F) 18Q 18 Watt Quad (1/EB/120,277,347/0 F) 75I 75 Watt Incandescent (1/A-19) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only 2C Two Circuit Wiring (2 only) FS Single Fuse & Holder (n/a with 75I lamp) PFC Power Factor Corrected Ballast - 120V only (277V standard) SB Specified Ballast (Consult Factory) Accessories 9500 POSIGRIP Screwdriver 28 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
Herculux Specification Sheets H99Dsm SERIES ceiling Mount/surface 32 Watt Maximum - Compact Fluorescent 100 Watt Maximum - Incandescent Height Width Depth 13" 13" 6" Type Lens: One-piece internal-prismatic refractor (U.V. stabilized, high impact, virgin injection molded polycarbonate). Nominal thickness.125". Housing: One-piece heavy duty die-cast, lowcopper aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish 5-step pre-treatment. Cross Section 5.55" (141mm) 9.00" (229mm) 13.00" (330mm) 5.89" (150mm) 9.00" (229mm) 6.44" (164mm) Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Reflector: High efficiency textured aluminum. Electrical: Electronic ballasts high power factor. Magnetic ballasts normal power factor standard. See for power factor corrected ballasts. Gasket: Die-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. Refractor inset into housing and sealed to integral ledge with one O ring closed cell silicone gasket. back Mounting View 6.44" (164mm) 9.00" (229mm) (4).28" Dia. Mounting KOs (2) 3/4" IPS Tapped & Plugged Holes (1) 3/4" IPS Tapped Hole Hardware: Four stainless steel POSIGRIP fasteners secure refractor/visor to housing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. Series Lens lamp lamp Accessories Type Type Qty H99DSM PP Pearlescent Polycarbonate C Clear Prismatic DB Dark Bronze (Standard) MB Matte Black (Optional) MW Matte White (Optional) LG Grey (Optional) SL Silver (Optional) FG Forest Green (Optional) CC Custom Color (Consult factory) Lamp Type (Qty/Ballast//Starting Temp) 7 7 Watt Twin (1,2/MB/120,277/0 F) 9 9 Watt Twin (1/MB/120,277/0 F) 13 13 Watt Twin (1/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1/EB/120,277,347/0 F) 26Q 26 Watt Quad (I/EB/120,277,347/0 F) 26P 26 Watt PLT (I/EB/120,277,347/0 F) 32P 32 Watt PLT (I/EB/120,277,347/0 F) 75I 75 Watt Incandescent (1/A-19) 100I 100 Watt Incandescent (1/A-19) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only 2C Two Circuit Wiring (2 only) BPC Photo Control - Button Type (120/277V only) FS Single Fuse & Holder PFC Power Factor Corrected Ballast- 120V only (277V standard) SB Specified Ballast (Consult Factory) Accessories 9500 POSIGRIP Screwdriver 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 29
Herculux Specification Sheets H99DSD SERIES CEILING MOUNT/SURFACE 52 Watt Maximum - Compact Fluorescent 70 Watt Maximum - HID Height Width Depth 13" 13" 7.5" Type Lens: One-piece internal-prismatic refractor (U.V. stabilized, high impact, virgin injection molded polycarbonate). Nominal thickness.125". Housing: One-piece heavy duty die-cast, lowcopper aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish 5-step pre-treatment. Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Reflector: High efficiency textured aluminum. Electrical: Electronic and magnetic ballasts high power factor standard. See for electronic metal halide ballast (EB). Shock absorbing, medium base lamp socket provided for HID lamps. Gasket: Die-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. Refractor inset into housing and sealed to integral ledge with one O ring closed cell silicone gasket. Hardware: Four captive stainless steel POSIG- RIP fasteners secure refractor/visor to housing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. Cross Section back Mounting View Horizontal Arm Bracket (HRZ) 9.00" (229mm) 6.44" (164mm) (4).31" Dia. Holes 7.11" (181mm) h99dsd 13.00" (330mm) 7.45" (189mm) PP Pearlescent Polycarbonate C Clear Prismatic DB Dark Bronze (Standard) MB Matte Black (Optional) MW Matte White (Optional) LG Grey (Optional) SL Silver (Optional) FG Forest Green (Optional) CC Custom Color (Consult factory) UV shielding lamp supplied. 9.00" (229mm) 6.44" (164mm) (4).28" Dia. Mounting KOs 9.00" (229mm) (1) 3/4" IPS (2) 3/4" IPS Tapped Hole Tapped & Plugged Holes Lamp Type (Qty/Ballast//Starting Temp) 26Q 26 Watt Quad (I/EB/120,277,347/0 F) 26P 26 Watt PLT (I,2/EB/120,277,347/0 F) 32P 32 Watt PLT (I/EB/120,277,347/0 F) 42P 42 Watt PLT (I/EB/120,277,347/0 F) 50M 50 Watt MH (1/HPF/120,277/-20 F) 50S 50 Watt HPS (1/HPF/120,277/-40 F) 70M 70 Watt MH (1/HPF,EB/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only 5.38" (137mm) 6" (152mm) 2.31" (59mm) (3) 3/4" IPS Tapped & Plugged Holes Series Mounting Lens lamp lamp Accessories Type Type Type Qty 2C Two Circuit Wiring (2 only) (n/a with EL Option) BPC Photo Control - Button Type (120/277V only) EB Electronic Ballast (120/277V 70M only) EL One-Lamp Indoor Battery Pack (32ºF) (120/277V compact fluorescent only, 32 watt max.) FS Single Fuse & Holder HRZ Arm Bracket QMS Quick Mount System Pre-lamped (mounting base shipped separately) QR Quartz Restrike System for Maximum 50W Candelabra Base Quartz Lamp (see 50QL) QS Quartz Socket Only for Maximum50W Candelabra Base Quartz Lamp (see 50QL) SB Specified Ballast (Consult Factory) Accessories 50QL 50 Watt Candelabra Base Quartz Lamp 9500 POSIGRIP Screwdriver 30 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
Herculux Specification Sheets H1212DSL SERIES Ceiling Mount/Surface 52 Watt Maximum - Compact Fluorescent 150 Watt Maximum - Incandescent Height Width Depth 17" 17" 5.5" Type Lens/Housing: One-piece wraparound lens (U.V. stabilized, high impact, virgin injection molded polycarbonate). Internal-prismatic refractor. Nominal thickness.125". Housing: 12-gauge aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Provided with four-point mounting holes and one wireway hole - see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish - 5 step pretreatment. Note: For surface conduit applications, see H1212DSM Series. Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Electrical: Electronic ballasts high power factor. Magnetic ballasts normal power factor standard. See for power factor corrected ballasts. Gasket: Die-cut closed cell neoprene gasket seals housing to mounting surface. Refractor inset into housing and sealed with one O ring closed cell silicone gasket. Hardware: Four captive stainless steel POSIG- RIP fasteners secure refractor/visor to housing. Shoulder design and washer prevent refractor/visor stress due to over torquing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. Cross Section back Mounting View 8.50" (216mm) 4.84" (141mm) 5.14" (130mm) 12.38" (314mm) 16.75" (425mm) (4).28" Dia. Mounting Holes Series lens lamp lamp Accessories Type Type Qty H1212DSL PP Pearlescent Polycarbonate C Clear Prismatic DB Dark Bronze (Standard) MB Matte Black (Optional) MW Matte White (Optional) LG Grey (Optional) SL Silver (Optional) FG Forest Green (Optional) CC Custom Color (Consult factory) Lamp Type (Qty/Ballast//Starting Temp) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (1,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (1,2/EB/120,277,347/0 F) 32P 32 Watt PLT (I/EB/120,277,347/0 F) 75I 75 Watt Incandescent (1,2/A-19) 100I 100 Watt Incandescent (1/A-19) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only 2C Two Circuit Wiring (2 only) (n/a with 26 watt lamps) FS Single Fuse & Holder (n/a with incand. lamps) PFC Power Factor Corrected Ballast - 120V only (277V standard) SB Specified Ballast (Consult Factory) Accessories 9500 POSIGRIP Screwdriver 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 31
Herculux Specification Sheets H1212DSM SERIES CEILING Mount/surface 84 Watt Maximum - Compact Fluorescent 55 Watt Maximum - Induction 150 Watt Maximum - Incandescent Height Width Depth 17" 17" 7" Type Lens: One-piece internal-prismatic refractor (U.V. stabilized, high impact, virgin injection molded polycarbonate). Nominal thickness.125". Housing: One-piece heavy duty die-cast, lowcopper aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish 5-step pre-treatment. Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Reflector: High efficiency textured aluminum. Electrical: Electronic and magnetic HID ballasts high power factor standard. Magnetic CFL ballasts normal power factor standard. See for electronic metal halide ballast (EB) and power factor corrected ballast (PFC). Shock absorbing, medium base lamp socket provided for HID lamps. Gasket: Die-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. Refractor inset into housing and sealed to integral ledge with one O ring closed cell silicone gasket. Hardware: Four stainless steel POSIGRIP fasteners secure refractor/visor to housing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. Cross Section 12.40" (314mm) back Mounting View 9.50" (241mm) (4).28" Dia. Mounting KOs 6.56" (167mm) 16.75" (425mm) 6.89" (175mm) 12.40" (314mm) 9.50" (241mm) 12.40" (314mm) (2) 3/4" IPS Tapped & Plugged Holes (1) 3/4" IPS Tapped Hole Series Lens lamp lamp Accessories Type Type Qty H1212DSM PP Pearlescent Polycarbonate C Clear Prismatic DB Dark Bronze (Standard) MB Matte Black (Optional) MW Matte White (Optional) LG Grey (Optional) SL Silver (Optional) FG Forest Green (Optional) CC Custom Color (Consult factory) UV shielding lamp supplied. Lamp Type (Qty/Ballast//Starting Temp) 13 13 Watt Twin (1,2/MB/120,277/32 F) 13Q 13 Watt Quad (1,2/EB/120,277,347/0 F) 18Q 18 Watt Quad (I,2/EB/120,277,347/0 F) 26Q 26 Watt Quad (I,2/EB/120,277,347/0 F) 26P 26 Watt PLT (I,2/EB/120,277,347/0 F) 32P 32 Watt PLT (I,2/EB/120,277,347/0 F) 42P 42 Watt PLT (I,2/EB/120,277,347/0 F) 57P 57 Watt PLT (I/EB/120,277,347/0 F) 70P 70 Watt PLT (I/EB/120,277,347/0 F) 50M 50 Watt MH (1/HPF/120,277/-20 F) 50S 50 Watt HPS (I/HPF/120,277/-40 F) 70M 70 Watt MH (1/HPF,EB/120,277/-20 F) 70S 70 Watt HPS (1/HPF/120,277/-40 F) 55IND 55 Watt Induction (Philips QL) (120V) 75I 75 Watt Incandescent (1,2/A-19) 100I 100 Watt Incandescent (1/A-19) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only 2C Two Circuit Wiring (2 only) (n/a with EL Option or 42P lamps) BPC Photo Control - Button Type (120/277V only) EB Electronic Ballast (120/277V 70M only) EL One-Lamp Indoor Battery Pack (32ºF) (120/277V compact fluorescent only, 32 watt max.) FS Single Fuse & Holder PFC Power Factor Corrected Ballast - 120V only (277V standard) QMS Quick Mount System Pre-lamped (mounting base shipped separately) QR Quartz Restrike System for maximum 75W DC Bay Quartz Lamp (see C-0796) QRC Hot/Cold Quartz Restrike System for maximum 75W DC Bay Quartz Lamp (see C-0796) QS Quartz socket only for maximum 75W DC Bay Quartz Lamp (see C-0796) SB Specified Ballast (Consult Factory) Accessories C-0796 75 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver 32 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
Herculux Specification Sheets H1212DSD SERIES ceiling mount/surface 84 Watt Maximum - Compact Fluorescent 150 Watt Maximum - HID 85 Watt Maximum - Induction Height Width Depth 17" 17" 9.5" Type Lens: One-piece internal-prismatic refractor (U.V. stabilized, high impact, virgin injection molded polycarbonate). Nominal thickness.125". Housing: One-piece heavy duty die-cast, lowcopper aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing see Cross Section/Details. Standard housing in dark bronze urethane powder coat finish 5-step pre-treatment. Dark Sky Visor: One-piece injection molded opaque dark bronze polycarbonate (U.V. stabilized). Dark sky visor allows for full-cutoff light output. Optional finishes to match housing. Nominal thickness.125". Reflector: High efficiency textured aluminum. Electrical: Electronic and magnetic ballasts high power factor standard. See for electronic metal halide ballast (EB). Shock absorbing, medium base lamp socket provided for HID lamps. Gasket: Die-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. Refractor inset into housing and sealed to integral ledge with one O ring closed cell silicone gasket. Hardware: Four stainless steel POSIGRIP fasteners secure refractor/visor to housing. Wet Locations. IDA-Approved. Installation: Standard four-point mounting required for Peace of Mind Lifetime Guarantee. 8.90" (226mm) Cross Section back Mounting View Horizontal Arm Bracket (HRZ) 9.50" (241mm) 12.40" (4).31" Dia. Holes (314mm) H1212DSD 16.75" (425mm) PP Pearlescent Polycarbonate C Clear Prismatic 9.24" (235mm) DB Dark Bronze (Standard) MB Matte Black (Optional) MW Matte White (Optional) LG Grey (Optional) SL Silver (Optional) FG Forest Green (Optional) CC Custom Color (Consult factory) UV shielding lamp supplied. 150 Watt ceiling mount only. 12.40" (314mm) 9.50" (241mm) (4).28" Dia. Mounting KOs 12.40" (314mm) (1) 3/4" IPS (2) 3/4" IPS Tapped Hole Tapped & Plugged Holes Lamp Type (Qty/Ballast//Starting Temp) 26Q 26 Watt Quad (I,2/EB/120,277,347/0 F) 26P 26 Watt PLT (I,2/EB/120,277,347/0 F) 32P 32 Watt PLT (I,2/EB/120,277,347/0 F) 42P 42 Watt PLT (I,2/EB/120,277,347/0 F) 57P 57 Watt PLT (I/EB/120,277,347/0 F) 70P 70 Watt PLT (I/EB/120,277,347/0 F) 70M 70 Watt MH (1/HPF,EB/120,277,347/-20 F) 70S 70 Watt HPS (1/HPF/120,277,347/-40 F) 100M 100 Watt MH (1/HPF,EB/120,277,347/-20 F) 100S 100 Watt HPS (1/HPF/120,277,347/-40 F) 150M 150 Watt MH (1/CWA/120,277,347/-20 F) 150S 150 Watt HPS (1/HPF/120,277,347/-40 F) 55IND 55 Watt Induction (Philips QL) (120) 85IND 85 Watt Induction (Philips QL) (120,277) 120 120 Volts 277 277 Volts DV 120/277 Volts, electronic ballasts only DT 120/277 Volts, magnetic ballasts only 5.38" (137mm) 6" (152mm) 2.31" (59mm) (3) 3/4" IPS Tapped & Plugged Holes 2C Two Circuit Wiring (2 only) (n/a with EL Option or 42P lamps) BPC Photo Control - Button Type (120/277V only) EB Electronic Ballast (120/277V 70M,100M only) EL One-Lamp Indoor Battery Pack (32ºF) (120/277V compact fluorescent only, 42 watt max.) FS Single Fuse & Holder HRZ Arm Bracket PML Pendant Mount Leveling system QMS Quick Mount System Pre-lamped (mounting base shipped separately) QR Quartz Restrike System for maximum 100W DC Bay Quartz Lamp (see 9009) QRC Hot/Cold Quartz Restrike System for maximum 100W DC Bay Quartz Lamp (see 9009) QS Quartz socket only for maximum 100W DC Bay Quartz Lamp (see 9009) SB Specified Ballast (Consult Factory) Series Mounting Lens lamp lamp Accessories Type Type Type Qty Accessories 9009 100 Watt DC Bay Quartz Lamp 9500 POSIGRIP Screwdriver 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 33
Additional Literature Available ArCHITeCTurAl HIGH AbuSe lighting FOr SCHOOlS AnD universities HerCulux Compact Fluorescent and HID luminaires for Ceiling and Wall Installation kenall express 24 hour ship architectural high abuse lighting for schools & universities herculux millenium FreesCale architectural sconces MIllenIuM MeTrex Architectural High Abuse led exit Signs attractive, Tough and efficient CusTOmiZaBle lighting solutions millenium stretch millenium freescale millenium metrex Visit Kenall's web site at www.kenall.com for our latest product information. At this site you can: Obtain up-to-date technical information Download photometric files View the latest product installations The Kenall web site is frequently updated to bring you the most current information available on the full line of Kenall products. 34 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
Peace of Mind Lifetime Guarantee Peace of Mind Lifetime Guarantee My name is Jim Hawkins, the C.E.O. and owner of Kenall Manufacturing. We originated and have produced the best high abuse lighting since 1963. I am so certain of our products quality, design, and construction, I am now making a promise to you. Kenall will repair or replace any architectural or institutional high abuse lighting fixture rendered inoperable due to physical abuse for the lifetime of the installation. This guarantee is my way of saying we stand behind our products and our customers now and for the years to come. Your continuing peace of mind will always be our most important priority. I guarantee it. Lighting for Tough Environments 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com 35