HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all bearing construction for maximum gripping force. Jaws center-ground for absolute straightness and alignment. Fluted sleeve standard. PPLITIONS: For heavy duty, close tolerance production drilling. LL ERING HUKS Key Type Equipped with a sliding ring ll components are hardened and ground for accuracy. Super holding and friction free movement. For heavy duty drilling. ap. Equiv. Inch 8-1/2N 0-5/16 2shJT LF-81S132SHJT $66.90 11N 0-3/8 2JT LF-82S-5-2JT $75.14-0-1/2 33JT LF-43S-6-33JT $99.43 14N 0-1/2 3JT LF-83S-6-3JT $104.47 16N 0-5/8 3JT LF-84S-6-3JT $119.10 18N 1/16-3/4 4JT LF-85S-9-4JT $175.64 20N 3/16-1-1/ 4JT LF-85S-9-4JT $240.46 LL ERING HUKS Key Type ody and jaws hardened and ground for extended life Dependable and accurate performance earings offer ultra smooth operation For heavy duty jobs ap. 0-3/8" JT2-3700-0081 $23.99 0-1/2" JT33-3700-0083 $24.99 0-1/2" JT6-3700-0084 $24.99 1/32-5/8" JT33-3700-0085 $32.95 1/8-5/8" JT33-3700-0086 $32.95 1/8-5/8" JT6-3700-0087 $32.95 3/64-3/4" JT33-3700-0089 $47.49 KEY TYPE PREISION HUKS Plain bearing models Precison crafted ll parts are hardened for maximum tool life Heavy duty performance LF Equiv. Inch mm TPER MOUNTED HUKS 81-1 1 0-1/4 0.3-6.5 1JT LF-81-1-1JT $34.68 82-2 2 0-3/8 0.5-10 2JT LF-82-2-2JT $46.31 82-2J2 31-02 0-3/8 0.5-10 2JT LF-82-5-2JT $46.31 43-6 34-02 0-1/2 0.5-13 2JT LF-43-6-2JT $53.52 43-6 34-33 0-1/2 0.5-13 33JT LF-43-6-33JT $54.68 43-6 34-06 0-1/2 0.5-13 6JT LF-43-6-6JT $54.68 84-6 3 0-5/8 0.5-16 3JT LF-84-6-3JT $76.65 43b-5 33 1/16-1/2 1.5-13 33JT LF-43-5-33JT $47.85 45-6 36 3/16-3/4 5-20 3JT LF-45-6-3JT $99.49 No. 250 2012-13 Master atalog Uses Key # 8-1/2N 0-1/4 2JT K30 J-30209 $108.18 11N 0-3/8 2JT K32 J-30215 $120.57 14N 0-1/2 3JT K3 J-30221 $168.55 16N 1/8-5/8 3JT K4 J-30227 $193.47 18N 1/8-3/4 4JT K4 J-30233 $290.98 20N 3/8-1 5JT K5 J-30239 $391.86 LL ERING HUKS all bearing construction for the toughest conditions ll components hardened and ground for accuracy Fluted sleeve rafted in Spain Equiv. ap. Inch 8-1/2N 1/64-5/16 2JT LM-L40070 $86.60 11N 1/32-3/8 2JT LM-L40071 $92.49 14N 1/32-1/2 3JT LM-L40072 $134.55 16N 1/32-5/8 3JT LM-L40073 $151.38 18N 1/32-3/4 4JT LM-L40074 $227.09 20N 3/16-1 5JT LM-L40075 $311.21-1/32-1/2 6JT LM-L40626 $134.55 PLIN ERING KEY TYPE HUKS Heavy and Medium duty models for threaded or taper mounting Jaws center-ground for absolute straightness and alignment. Thru-hardened sleeve teeth. MEDIUM DUTY TPER MOUNTED Uses Key # 0 0(2)-.156 0JT K0 J-6200 $72.56 1 0(1)-.250 1JT K1 J-6206 $58.44 2 0(1)-.375 2JT K2 J-6214 $80.94 31-01 0(1)-.375 1JT K30 J-14697 $88.53 31-02 0(1)-.375 2JT K30 J-14698 $92.51 33.08-.500 33JT K32 J-6279 $90.49 33KD(3).08-.500 33JT K32 J-6281 $100.79 HEVY DUTY TPER MOUNTED Uses Key # 3.125-.625 3JT K3 J-6223 $131.05 3KD(2).125-.625 3JT K3 J-6228 $176.00 3PD(3).125-.625 3JT K3 J-6230 $205.67 34-02 0(1)-.500 2JT K3 J-14442 $81.90 34-06 0(1)-.500 6JT K3 J-6295 $109.29 34-33 0(1)-.500 33JT K3 J-14445 $93.04 34-0(1)-.500 33JT K3 J-14451 $85.48 36.180-.800 3JT K4 J-6309 $164.47 36KD(2).180-.800 3JT K4 J-14865 $158.50 36PD(3).180-.800 3JT K4 J-14866 $158.50 (2) Equipped with positive drive slot (3) Equipped with pin type positive drive (4) Equipped with locking collar- 1-1/16-20 thread, smooth sleeve
DRILL HUKS-KEYED & KEYLESS TYPE PLIN ERING DRILL HUKS KEYED-MEDIUM DUTY For stationary drilling, turning, milling and wood working machines One-piece ring and sleeve eliminates the possibility of the teeth breaking Hardened to avoid wear and to lengthen the life of the drill chuck Manufactured In Spain and threaded mounts Up to 3/4 capacity Y Plain earing Medium Duty Y Plain earing Medium Duty Threaded OL Key INDUSTRIL KEYLESS HUKS HIGH PREISION The Ultimate In Drill ccuracy ombined With Keyless Operation! Precision tested and certified to.0016 TIR or better. Self-tightening feature increases gripping force to prevent tool shank slippage. Wear exposed components are completely hardened to extend tool life. PPLITIONS: For high accuracy applications on conventional or N equipment. HIGH PREISION JKP Features: T.I.R. not to exceed 0.0016 High precision, keyless operation Self-tightenting design automatically increases clamping force ll exposed components are hardened to maintain accuracy and extend chuck life Ideal for use on drill presses with high accuracy, jib bore and milling machines and production drilling machines JKT Features: Same features as JKP series with the addition of milled wrench flats PREISION KEYLESS HUKS Great value! ompare price to national brands New lightweight design all bearing - hand locking Self tightening system Ea OL Key Reference # No. HIGH PREISION KEYLESS JKP65-J1 0-.255 1JT J-31121 $200.37 JKP80-J2S 0-.315 J2S J-9679 $200.37 JKP100-J2 0-.394 J2 J-9681 $215.26 JKP100-J33 0-.394 J33 J-9680 $215.26 JKP130-J2.039-.512 J2 J-9683 $230.90 JKP130-J33.039-.512 J33 J-9682 $230.90 JKP130J6.039-.512 J6 J-9684 $230.90 JKP160-J6.118-.630 J6 J-9685 $266.03 HIGH TORQUE-HIGH PREISION JKT65-J1 0-.255 1JT J-31122 $222.68 JKT80-J2S.0-.315 J2S J-30526 $222.68 JKT130-J2.039-.512 J2 J-30527 $267.19 JKT130-J33.039-.512 J33 J-30528 $267.19 JKT130-J6.039-.512 J6 J-30529 $267.19 JKT160-J6.118-.630 J6 J-30530 $319.36 HIGH PREISION KEYLESS JKP65-J1 0-1/4 1JT LM-L31121 $197.25 JKP100-J2 0-3/8 J2 LM-L9681 $183.75 JKP100-J33 0-3/8 J33 LM-L9680 $183.75 JKP130-J2 1/32-1/2 J2 LM-L9683 $191.25 JKP130-J33 1/32-1/2 J33 LM-L9682 $191.25 JKP130-J6 1/32-1/2 J6 LM-L9684 $191.25 JKP160-J6 1/8-5/8 J6 LM-L9685 $226.46 HIGH-TORQUE-HIGH-PREISION KEYLESS JKT65-J1 0-1/4 1JT LM-L31122 $195.30 JKT130-J2 1/32-1/2 J2 LM-L30527 $210.00 JKT130-J33 1/32-1/2 J33 LM-L30528 $210.00 JKT130-J6 1/32-1/2 J6 LM-L30529 $210.00 JKT160-J6 1/8-5/8 J6 LM-L30530 $260.01 0JT 1/32-5/32 1.38 K0 LM-L40129 $76.82 5/16-24 1/64-5/32 1.38 K0 LM-L40137 $94.32 1JT 1/32-1/4 1.97 K4 LM-L40130 $64.83 3/8-24 1/64-1/4 1.93 K4 LM-L40138 $64.83 2JT 1/32-3/8 2.68 K34 LM-L40131 $88.42 3/8-24 1/64-3/8 2.68 K34 LM-L40139 $82.52 1JT 1/32-3/8 2.48 K34 LM-L40132 $97.86 3/8-24 1/64-3/8 2.48 K34 LM-L40140 $76.62 2JT 1/32-3/8 2.48 K34 LM-L40133 $102.58 1/2-20 1/64-3/8 2.48 K34 LM-L40142 $100.22 33JT 1/32-1/2 3.03 K2 LM-L40134 $100.22 1/2-20 1/64-1/2 3.03 K2 LM-L40143 $88.42 3/8-24 1/64-1/2 3.03 K2 LM-L40144 $94.32 5/8-16 1/64-1/2 3.03 K2 LM-L40145 $88.42 High Precision Keyless 0-5/16 1JT LF-11-1JT $116.23 0-3/8 2JT LF-22-2JT $134.19 0-1/2 33JT LF-23-33JT $156.15 0-1/2 6JT LF-23-6JT $156.15 1/8-5/8 33JT LF-24-33JT $164.69 High Torque-High Precision 0-1/2 33JT LF-73S-33JT $151.17 0-1/2 6JT LF-73S-6JT $151.17 1/8-5/8 6JT LF-74S-6JT $178.11 2012-13 Master atalog 251 Ea LTHE HUKS LIVE ENTERS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS DRILL HUKS RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEYLESS LSSI HIGH PREISION Keyless operation Self-tightenting design alanced Note: run at maximum only with lbrecht arbors or when direct mounting to high-speed spindle HEVY DUTY High Precision Keyless Drill s are precision devices designed for high accuracy applications on either conventional or N machines in drilling, boring, and counterboring operations Designed to be tightened and released by hand Self-tightening feature vailable in Precision quality, 0.005 T.I.R and in N quality, 0.0015 T.I.R HEVY DUTY & ULTR PREISION Self-tightening design, no chuck key required Solid steel body Heavy Duty model can be used on a wide variety of machinery Ultra Precision model is especially suited for N machines and features closer tolerances to assure excellent runout accuracy Heavy Duty Keyless Drill s SENSITIVE DRILL FEED Makes drilling of small holes easy Give operator better feel and control of feed rate Excellent on large machinery where sensitive feed is necessary Smooth, sensitive finger tip control for less drill breakage ap. 0-3/8 JT2-3700-0204 $30.89 0-3/8 JT33-3700-0207 $30.89 0-1/2 JT33-3700-0210 $38.89 1/32-1/2 JT2-3700-0212 $38.89 1/32-1/2 JT6-3700-0213 $38.89 1/8-5/8 JT6-3700-0215 $42.95 Ultra Precision Keyless Drill s ap. 1/32-3/8 JT2-3700-0250 $52.49 1/32-3/8 JT33-3700-0251 $52.49 1/32-1/2 JT2-3700-0252 $59.99 1/32-1/2 JT33-3700-0255 $59.99 1/32-3/8 JT6-3700-0257 $59.99 1/32-5/8 JT6-3700-0259 $73.49 *Drill chuck not included. 252 2012-13 Master atalog Inches mm 15-J0 0-1/16 0-1.5 J0 50,000 L-70010 $291.00 30-J0 0-1/8 0-3 J0 35,000 L-70020 $236.00 30-J1 0-1/8 0-3 J1 35,000 L-70030 $236.00 65-J1 0-1/4 0-6.5 J1 20,000 L-70050 $256.00 100-J33 0-3/8 0-10 J33 12,000 L-70070 $291.00 100-J2 0-3/8 0-10 J2 12,000 L-70080 $291.00 130-J33 1/32-1/2 1-13 J33 7,000 L-70090 $322.00 130-J2 1/32-1/2 1-13 J2 7,000 L-70100 $322.00 130-J6 1/32-1/2 1-13 J6 7,000 L-70110 $322.00 160-J6 1/8-5/8 3-16 J6 4,000 L-70120 $364.00 OL High Precision 0.005 T.I.R. 1/32-1/2 JT2 4.30 I-7051-135 $139.35 1/32-1/2 JT33 4.30 I-7051-137 $139.35 1/32-1/2 JT6 4.30 I-7051-138 $139.35 1/8-5/8 JT6 4.65 I-7051-168 $163.80 1/8-5/8 JT33 4.90 I-7051-169 $164.27 High Precision-High Torque 0.0015 T.I.R. 1/32-1/2 JT2 4.30 I-7051-335 $139.35 1/32-1/2 JT33 4.30 I-7051-337 $139.35 1/32-1/2 JT6 4.30 I-7051-338 $139.35 1/8-5/8 JT6 4.65 I-7051-368 $163.80 1/8-5/8 JT33 4.90 I-7051-369 $164.27 WITH INTEGRL SHNKS Integral shank design is more compact than a combined drill chuck and arbor, resulting in greater accuracy, rigidity and larger work envelope Keyless operation and balanced, selftightenting design. vailable in R8, Straight and Morse s 1/32-1/2 R8 7,000 L-73040 $393.00 1/8-5/8 R8 4,000 L-73090 $432.00 1/32-1/2 5/8 SS 7,000 L-73050 $356.00 1/32-1/2 2MT 7,000 L-73010 $357.00 1/8-5/8 2MT 4,000 L-73060 $396.00 1/32-1/2 3MT 7,000 L-73020 $359.00 1/8-5/8 3MT 4,000 L-73070 $399.00 1/8-5/8 4MT 4,000 L-73080 $419.00 Dia 1/2 #0 rand Sierra merican SIE-F-22 $40.14 Royal ROY-25300 $57.82
DRILL HUKS-INTEGRL SHNK N DRILL HUKS Wrench Or Key Lock The wide gripping range of these N drill chucks makes them less expensive to use than collet chucks and solid tool holders. alanced for high-speed operation, these integral shank drill chucks provide greater rigidity and are extremely accurate. Wrench or Hex Key is provided with each N drill chuck. N DRILL HUKS Hexagonal Key Lock For high speed N machines Hexagonal key lock system lockwise and counterclockwise rotation Maximum total run-out of 0.0012 guaranteed alanced to 8,000 @ g6.3 WL/KL130-T40 1/32-1/2 T 40 6,500 L-77100 $459.00 WL/KL160-T40 1/16-5/8 T 40 6,500 L-77110 $519.00 WL/KL160-T50 1/16-5/8 T 50 6,500 L-77120 $603.00 WL/KL130-T40 1/32-1/2 T40 6,500 L-77160 $459.00 WL/KL160-T40 1/16-5/8 T40 6,500 L-77170 $519.00 WL/KL160-T50 1/16-5/8 T50 6,500 L-77180 $603.00 With Integral Integral shank precision ball-bearing keyless drill chuck Made of alloy forged steel Integral shank design offers greater accuracy and rigidity compared to combined drill chuck and arbor Self-tightening keyless operation Maximum TIR: 0.0015 LTHE HUKS LIVE ENTERS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS a pa c ity Proj 0-3/8 1/32-1/2 1/8-5/8 T 40 4.27 LM-L40016 $490.00 T 50 4.04 LM-L40018 $577.50 T 40 4.37 LM-L40008 $490.00 T 40 4.85 LM-L40020 $490.00 T 50 5.04 LM-L40022 $605.50 T 40 4.45 LM-L40012 $514.50 T 40 5.00 LM-L40024 $514.50 T 50 4.81 LM-L40026 $619.50 R8 INTEGRL SHNK DRILL HUKS Super Precision Hexagonal Key Lock Integrated R8 shank maximizes rigidity and accuracy Hexagonal key lock system Innovative design run-out.0012 INTRUDER SFETY GLSSES Projection T40 T40 T50 Economical, lightweight glasses offers superior protection Superior comfort and fit Lenses are coated for scratch resistance Provides 99% protection against harmful UV rays Meets NSI Z87.1-2003 standards 1/32-1/2 3.74 40-50D1- $198.81 1/8-5/8 3.94 40-62D1- $214.17 1/32-1/2 4.13 40-50D1- $225.27 1/8-5/8 5.12 40-62D1- $241.69 1/32-1/2 4.13 50-50D1- $268.07 1/8-5/8 4.33 50-62D1- $284.59 Type R8 1/32-1/2 LM-L40049 $468.75 R8 1/8-5/8 LM-L40050 $523.50 5/8 SS 1/32-1/2 LM-L40048 $336.75 MT2 1/32-1/2 LM-L40042 $352.50 MT3 1/32-1/2 LM-L40043 $360.00 MT4 1/32-1/2 LM-L40044 $386.25 Lens olor Temple olor lear lear PYR-S4110S $1.49 Gray Gray PYR-S4120S $1.69 2012-13 Master atalog 253 DRILL HUKS RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE
HUK JWS LTHE WORKHOLDING MHINE VISES DRILL HUK KEYS & RORS KEY D-DE Keys 4 uilt-in Pinions ct s Master Key For Over 110 s! D1 Industrial Keys w/ Magnet Key No. LF Series Series R6 / K3 R5 / K32 43, 44, 45, 84, 83S, 84S, 44Z, 43S 82, 43b, 43bZ 3, 3, 6, 6, 14N, 34, 55, 56, 58, 634, 75 11N, 32, 33, 3326, M10, M33, M3326 R2 / K2 82 2, M5 R13 / K30 81b, 42, 81bS 30, 31, 8-1/2N, M4 LF-D1M $17.98 D2 Hardware/Industrial Keys w/ Magnet Key No. LF Series Series R1 / K1 81-1, 81-1 1, 1, 1S, M T1/ KG1 412, 420, 4200 D, H1, Mc, U R4 / K7 MDE IN THE * * * * * * * US 7, 7, 7 R13 / KK 422, 4220 D, H, M, U LF-D2M $15.99 RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD HUK KEYS Nickel thumb grip styles increase leverage and user comfort Soft steel handles limit the potential for dangerous fracturing under excessive load Self-ejecting styles also available RORS Straight To RORS Threaded Length T-Handle L-Handle Thumb Handle 254 2012-13 Master atalog Style Pilot Size (in.) Used On KO* T-Handle 1/8 0 Series J-3637 $4.56 LF-0 $3.06 K1 T-Handle 5/32 1 Series J-3641 $3.21 LF-1 $2.16 K1M T-Handle 5/32 1 Series SS J-3643 $13.78 - - K2* Thumb 1/4 2 Series J-3649 $4.54 LF-2 $3.06 K3* Thumb 5/16 3,34 Series & 14n J-3651 $5.39 LF-T6 $3.65 K3 Thumb 5/16 34-33c J-3653 $6.47 LF-T6 $4.59 K4* Thumb 3/8 36,16,18n J-3655 $8.93 LF-9 $8.55 K5 T-Handle 7/16 20n J-3657 $19.66 LF-26 $13.28 K7* Thumb 7/32 7 Series J-3659 $3.98 LF-T4 $2.68 K30* Thumb 15/64 31 Series & 8-1/2n J-3664 $4.39 LF-13 $2.97 K32* Thumb 1/4 32,33 Series & 11n J-3666 $4.64 LF-T5 $3.15 KK T-Handle 9/32 Dc8,sm8,74k,22ba,23ba, 24ba, 26ba,29-33 J-30052 $3.68 LF-T13 $2.48 KG L-Handle 1/4 1/4" & 3/8" Multi-craft J-3605 $2.02 LF-T80 $1.40 1/2" X OJT 2.50 J-7348 $15.34 1/2" X 1JT 2.50 J-7349 $15.34 1/2" X 2JT 2.50 J-7350 $15.34 1/2" X 3JT 2.50 J-7351 $15.34 1/2" X 6JT 2.50 J-7353 $19.99 1/2" X 33JT 2.50 J-7354 $15.34 5/8" X 1JT 2.50 J-7355 $18.89 5/8" X 2JT 2.50 J-7356 $18.89 5/8" X 3JT 2.50 J-7357 $26.49 5/8" X 6JT 2.50 J-7359 $20.64 5/8" X 33JT 2.50 J-7360 $17.62 3/4" X 2JT 3.00 J-7361 $26.49 3/4" X 3JT 3.00 J-7362 $24.20 3/4" X 6JT 3.00 J-7364 $28.16 3/4" X 33JT 3.00 J-7365 $28.54 1" X 3JT 3.00 J-7367 $28.57 1" X 6JT 3.00 J-7368 $29.69 2 MT - 3/8" - 24 J-7345 $54.00 2 MT - 1/2" - 20 J-7346 $54.00 2 MT - 5/8" - 16 J-7347 $54.00 * Must be ordered in multiples of 20 keys RORS Morse s To 1 MT x 1 JT J-7299 $20.15 1 MT x 2 JT J-7300 $20.15 1 MT x 6 JT J-7303 $21.64 1 MT x 33 JT J-7304 $21.64 2 MT x 1 JT J-7306 $20.15 2 MT x 2 JT J-7307 $16.88 2 MT x 3 JT J-7308 $16.88 2 MT x 4 JT J-7309 $21.64 2 MT x 6 JT J-7311 $20.11 2 MT x 33 JT J-7312 $15.26 RORS R8/ridgeport to rbor R8 3 MT x 1 JT J-7313 $21.32 3 MT x 2 JT J-7314 $21.32 3 MT x 3 JT J-7315 $20.91 3 MT x 4 JT J-7316 $27.69 3 MT x 5 JT J-7317 $24.44 3 MT x 6 JT J-7318 $21.32 3 MT x 33 JT J-7319 $20.91 4 MT x 2 JT J-7320 $36.30 4 MT x 3 JT J-7321 $32.54 4 MT x 4 JT J-7322 $32.54 4 MT x 5 JT J-7323 $51.87 4 MT x 6 JT J-7324 $32.49 4 MT x 33 JT J-7325 $34.32 2JT J-7339 $80.63 3JT J-7340 $80.63 4JT J-7341 $80.63 6JT J-7342 $80.63 33JT J-7343 $80.63