AY-SS Trigger Adapter AA46

98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate 249, spray weight gun, 3 2 handle pounds, is rotated brass. 3/49 360 garden from hose shutoff thread to (F) inlet maximum connection. flow Also position. available As handle in aluminum is turned, as GunJet spray changes AA2-AL, from weight For initial /4 spot pounds. cone spraying, through tree intermediate spraying, cone spray to straight livestock stream. Spray spraying tips are interchangeable and power washing orifice discs made of GunJet corrosionat pressures Number and erosion-resistant from AA43 stainless steel. 30 to 800 PSI. Length 22 /4, weight /4 pounds and only available in To operate spray gun, handle is rotated 360 from shutoff to aluminum. maximum Choice flow Inlets of position. Materials are available As handle and with is turned, Capacities 3/4 or spray GH changes (Garden from Hose) female initial GunJet cone threads. spray Number through AA2A intermediate cone spray to straight stream. Length Spray 59, tips weight are interchangeable 2/2 pounds, brass. orifice 3/49 garden discs made hose thread of (F) inlet corrosion- connection. and erosion-resistant Also available in Inlet aluminum stainless steel. as GunJet AA2A-AL, weight pound. Same design as GunJet AA2. AA43-AL-GH-6 Choice GunJet of Number Materials AA2 Garden Hose Inlet $09.33 and Capacities AA43-AL-3/4-6 Length 249, weight 3 2 pounds, 3/4 brass. Inlet 3/49 garden hose thread $09.33 (F) inlet connection. Also available in aluminum as GunJet AA2-AL, weight liquid pressure in psi OrifiCe /4 GuNJeT pounds. disc performance 00 psi 800 psi A C A C Capacity GPM.53.90.5 2.5 GunJet AA2-20 Trigger Adapter AA46 Vert. Throw ft. 25 33 20 Horiz. Throw ft. 6 35 8 42 Capacity GPM.79.4 2.2 4.0 GunJet Number AA2-30 AA2A 30 Vert. Throw ft. 27 34 Horiz. Throw ft. 7 38 9 45 connection. Also available in aluminum as GunJet AA2A-AL, weight Replacement Capacity Parts GPM Only.2 2.3 3.4 6.5 pound. Same AA2-45 design as GunJet AA2. 45 Vert. Throw ft. 30 36 Horiz. Throw ft. 8 4 9 48 Capacity GPM.6 3.6 4.5 0 AA2-60 liquid pressure in psi OrifiCe GuNJeT 60 Vert. Throw ft. 32 40 disc performance 00 psi 800 psi Horiz. Throw ft. 9 44 0 52 Capacity GPM 2.3 A 4.9 C 6.7 A 4 C AA2-90 90 Capacity Vert. Throw GPM ft..53.90 35.5 2.5 44 AA2-20 Horiz. Vert. Throw ft. ft. 0 47 25 2 57 33 20 Capacity Horiz. GPM Throw ft. 3.2 liquid 6 pressure 6.4 35 in 9.0 8psi 7 42 OrifiCe GuNJeT AA2-20 disc 20 Capacity performance Vert. Throw GPM ft..79.4 37 2.2 4.0 48 00 psi 800 psi AA2-30 Horiz. ft. 49 3 62 30 Vert. Throw ft. 27 34 A C A C Capacity Horiz. GPM Throw ft. 4.7 7 38 3 9 3 45 AA2-80 Capacity GPM.53.90.5 2.5 Vert. Throw ft. 37 48 AA2-20 Capacity GPM.2 2.3 3.4 6.5 80 Replacement Vert. Throw ft. 25 33 AA2-45 20 Parts Horiz. ft. 2 49 4 62 45 Vert. Throw ft. 30 36 Horiz. Throw ft. 6 35 8 42 Horiz. Throw ft. 8 4 9 48 Capacity GPM.79.4 2.2 4.0 How to order: AA2-30 Capacity GPM.6 3.6 4.5 0 For complete 30 Vert. Throw ft. 27 34 AA2-60 gun, 60 specify GunJet Vert. Throw spray ft. gun number 32 and material. 40 Horiz. Throw ft. 7 38 9 45 Example: AA2-20, Brass or Horiz. Throw ft. 9 44 0 52 Capacity GPM.2 2.3 3.4 6.5 AA2-AL20, Aluminum AA2-45 Capacity GPM 2.3 4.9 6.7 4 To order orifice 45 Vert. Throw ft. 30 36 AA2-90 90disc only, specify Vert. Throw orifice ft. disc number. 35 44 Horiz. Throw ft. 8 4 9 48 Example: 20 Horiz. Throw ft. 0 47 2 57 Capacity GPM.6 3.6 4.5 0 AA2-60 Capacity GPM 3.2 6.4 9.0 7 60 Vert. Throw ft. 32 40 AA2-20 20 Vert. Throw ft. 37 48 Horiz. Throw ft. 9 44 0 52 Horiz. Throw ft. 49 3 62 Capacity GPM 2.3 4.9 6.7 4 AA2-90 Capacity GPM 4.7 3 3 90 Vert. Throw ft. 35 44 AA2-80 Vert. Throw ft. 37 48 80 Horiz. Throw ft. 0 47 2 57 Horiz. Throw ft. 2 49 4 62 Capacity GPM 3.2 6.4 9.0 7 AA2-20 20 Vert. Throw ft. 37 48 How to order: Horiz. Throw ft. 49 3 62 For complete gun, specify GunJet spray gun number and material. Capacity GPM 4.7 3 3 Example: AA2-80 AA2-20, Brass or Vert. Throw ft. 37 48 80 AA2-AL20, Aluminum Horiz. Throw ft. 2 49 4 62 GunJet Number AA2 Length 249, weight 3 2 pounds, brass. 3/49 garden hose thread (F) inlet connection. Also Description available in aluminum as GunJet AA2-AL, weight /4 pounds. AA46 Length 59, weight Trigger 2/2 pounds, Adapter brass. 3/49 garden hose thread (F) inlet GunJet Number AA2A Length 59, weight 2/2 pounds, brass. 3/49 garden hose thread (F) inlet connection. Also available in aluminum as GunJet AA2A-AL, weight pound. Same design as GunJet AA2. GunJet Number AA43 CP325-AL Cap, Aluminum $.6 2 D Orifice Disc (specify size) $.83 3 CP4743-NY Gasket, Nylon $.9 4 CP0566-AL Nozzle Housing, Aluminum $2.92 5 0565--NY-AL Seat Plug, Plate, Washer & Core $35.04 6 CP057-3-NYB Guide Vane, Nylon $0.34 7 CP4596-NYB Gasket, Nylon (2) $.93 8 CP0576-46SS Stem, Type 46 Stainless Steel $24.77 9 CP6604-AL Tubing, Aluminum $46.80 0 CP668-AL Nut, Aluminum $.87 CP6898-GH-AL Inlet Body, Garden Hose Thread $39.69 To order CP6898-3/4-AL orifice disc only, specify Inlet Body, orifice 3/4 disc NPT number. (F) $39.69 2 Example: CP5882-NP 20 Hand Grip Stud $3.59 3 How to CP5883-AL order: Packing Washer, Aluminum $.93 4 For complete CP5809-LEA gun, specify GunJet Packing, spray Thermo-Leather gun number and (4) material. $.93 5 Example: CP58-AL AA2-20, Brass or Packing Screw, Aluminum $4.24 AA2-AL20, Aluminum 6 CP5884-INP Hand Grip Collar, Steel-Nickel $9.96 To order orifice disc only, specify orifice disc number. 7 CP5994-2-NY Hand Grip, Nylon $.56 Example: 20 8 CP583-AL Hand Grip Nut, Aluminum $3.9 9 CP5808-POL Garden Hose Gasket $5.08 PK-AB43-AL-KIT Spare Parts Kit (Includes items with ) $35.27 setting A Wide ANGle CONe spray GunJet Number AA43 Length 22/49, weight /4 pounds and only available in aluminum. Maximum Inlets are available with 3/49 or GH Maximum (Garden Horizontal setting Hose) female Throw A threads. setting Horizontal C Throw Wide ANGle CONe spray straight stream spray GuNJeT OrifiCe disc performance setting C straight stream spray liquid pressure in psi 00 psi 800 psi Maximum Maximum A C A C Horizontal Throw Capacity GPM Horizontal.36 Throw.36.0.0 AA43-AL-*-2 D2 Vert. Throw ft. 22 26 Horiz. Throw ft. 0 33 35 Capacity GPM.82.82 2.3 2.3 GunJet AA43-AL-*-4 Number D4 AA43 Vert. Throw ft. 27 32 Length 22/49, weight /4 pounds Horiz. Throw and only ft. available 0 36 40 in aluminum. Inlets are Capacity available GPMwith 3/49 or GH.7.8 4.9 5. (Garden AA43-AL-*-6 Hose) female D6 threads. Vert. Throw ft. 33 38 Horiz. Throw ft. 0 46 54 Capacity GPM 2.8 3.3 8. 9.4 liquid pressure in psi GunJet AA43-AL-*-8 Number OrifiCe D8AA43 GuNJeT Vert. Throw ft. 35.5 42 Length 22/49, weight disc /4 pounds performance Horiz. and Throw only ft. available 00 psi 800 psi 0 54 60 in aluminum. Inlets are available Capacity with GPM 3/49 or GH 3.9 A 4.9 C.2 A 3.9 C (Garden AA43-AL-*-0 Hose) female D0 threads. Capacity Vert. Throw GPM ft..36 37.5.36.0 44.5.0 AA43-AL-*-2 D2 Vert. Horiz. Throw ft. ft. 0.5 22 55 2 26 62 *Inlet size 3/49 or GH. Horiz. Throw ft. 0 liquid pressure 33 in psi 35 OrifiCe GuNJeT disc Capacity performance GPM.82.82 2.3 2.3 00 psi 800 psi How AA43-AL-*-4 to order: D4 Vert. Throw ft. 27 32 A C A C Examples: AA43-AL-3/4-6 Horiz. Throw ft. 0 36 40 AA43-AL-GH-6 Capacity GPM.36.36.0.0 Trigger AA43-AL-*-2 Adapter D2 AA46 Capacity GPM.7.8 4.9 5. Vert. Throw ft. 22 26 To AA43-AL-*-6 order orifice disc D6 only, specify Vert. Throw orifice ft. disc number. 33 38 Replacement Example: D2 Parts Horiz. Throw ft. 0 33 35 Horiz. Throw ft. 0 46 54 Capacity GPM.82.82 2.3 2.3 Capacity GPM 2.8 3.3 8. 9.4 AA43-AL-*-4 D4 Vert. Throw ft. 27 32 AA43-AL-*-8 D8 Vert. Throw ft. 35.5 42 Horiz. Throw ft. 0 36 40 Horiz. Throw ft. 0 54 60 Capacity GPM.7.8 4.9 5. Capacity GPM 3.9 4.9.2 3.9 AA43-AL-*-6 D6 Vert. Throw ft. 33 38 AA43-AL-*-0 D0 Vert. Throw ft. 37.5 44.5 Horiz. Throw ft. 0 46 54 Horiz. Throw ft. 0.5 55 2 62 Capacity GPM 2.8 3.3 8. 9.4 *Inlet size 3/49 or GH. AA43-AL-*-8 D8 Vert. Throw ft. 35.5 42 How to order: Horiz. Throw ft. 0 54 60 Examples: AA43-AL-3/4-6 Capacity GPM 3.9 4.9.2 3.9 AA43-AL-*-0 AA43-AL-GH-6 D0 Vert. Throw ft. 37.5 44.5 Horiz. Throw ft. 0.5 55 To order orifice disc only, specify orifice disc number. 2 62 *Inlet Example: size 3/49 or GH. D2 How to order: Examples: AA43-AL-3/4-6 AA43-AL-GH-6 To order orifice CP7502-AL disc only, specify Seat orifice Holder, disc number. Aluminum $4.24 Example: 2 D2 CP670--BU Seat, Buna-N $4.94 3 CP750-AL Seat Washer, Aluminum SPRAY $.93GUNS 4 CP7458-AL Body, Aluminum 5 CP7503-LEA Packing, Thermo-Leather (3) $2.66 6 CP7500-AL Packing Screw, Aluminum $7.5 7 CP7504-SS Spring, Stainless Steel ENGLISH $4.63 8 CP7499-SS Stem, Stainless Steel $0.82 9 CP7622-302SS #6 Burr, Stainless Steel $.87 0 CP7498-SS Stem Nut, Stainless Steel $4.64 CP7623-IZP Rivet, Steel, Zinc Plated (2) $.87 2 CP6509-INP Trigger, Steel, Nickel Plated $7.39 3 CP7477-IZP Trigger Lock, Steel, Zinc Plated $6.27 4 CP7720-420SS Roll Pin, Stainless Steel $2.57 5 CP5808-BU Gasket, GH, Buna-N (2) SPRAY $5.08GUNS 6 CP7626-BU Gasket, Outlet Conn, Buna-N (2) $.87 PK-AB46-KIT Spare Parts Kit (Includes items with ) $6.05 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 ENGLISH 09 09 09

Lawn Spray Guns Features: Options available: hose shank swivel Interchangeable nozzle tips are color-coded Nozzle tips provide a 45 o full cone showerhead for easy identification of nozzle tip size. spray pattern. Convenient trigger lock for continuous spraying. Options available: hose shank swivel for inlet Maximum operating pressure of 200 PSI connection and extension wand and adapters for Made of Nylon with Viton O-rings low-volume and spot spraying. Made of Nylon with Viton O-rings and stainless steel springs. 99 model NumBer Nozzle tip NumBer CaPaCitY (gpm) at various Pressure* 2 Psi 4 Psi 6 Psi 8 Psi 0 Psi 5 Psi 20 Psi 25660-.5 CP25670-.5-NY.4.9 2.3 2.6 2.9 3.4 4.0 25660-* $8.39 *Specify Tip Size -.5, 3.0, 4.0 REPLACEMENT NOZZLES CP25670-.5-NY $7.7 CP25670-3.0-NY $7.7 CP25670-4.0-NY $7.7 Reference Tip Chart for GPM 25660-3.0 CP25670-3.0-NYB 25660-4.0 CP25670-4.0-NY *Pressure measured at spray nozzle. 25990 25660 TeeJet Swivel Lawn Spray Gun 2.0 2.7 3.2 3.6 4. 4.9 5.6 2.3 3. 3.7 4.3 4.7 5.6 6.4 25657-NYB Adapter 25990 Swivel Allows operator to concentrate on application without hose interference. 3/4 (M) NPT connection with /2 hose shank. Maximum pressure 50 PSI. Part # Description 25990-3/4-NYB Swivel w/ /2 Barb $5.3 25657-NYB Adapter Replaces shower nozzle to allow extension wand or standard TeeJet tip to be attached directly to lawn spray gun. 3/4 (F) GHT inlet with /6-6 TeeJet thread outlet. Maximum pressure 50 PSI Part # Description 25657-NYB Wand Adapter $26.4 5 or 24 Extension Wand - 22665 22665 Extension Wand For low volume and spot spraying applications. Available in both 5 and 24 lengths, the extension fits on 25657-NYB adapter. Maximum pressure 50 PSI. Part # Description 22665-5-PP 5 Extension Wand $3.49 22665-24-PP 24 Extension Wand $22.46 CP22673-PP & CP22664-PP Adapters Used for attaching standard TeeJet tips or adjustable ConeJet nozzles. Part # Description CP22664-PP Straight Adapter $2.25 CP22673-PP 45 o Adapter $2.6 Spray Guns Model 50800 The 50800 TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low-pressure sprayers. The TriggerJet is made of molded polypropylene for excellent chemical resistance and durability. Features: Available with 5 polypropylene or 2 aluminum extension wand. Available with 38720-PPB-X8 or X26 adjustable ConeJet tips with a 30 o offset. Trigger lock permits locking gun in an open position for continuous flow. Maximum operating pressure of 00 PSI. Approximate max. hose O.D. - /2. Polypropylene strainer located inside handle to prevent tip clogging. 50800-5-PP-300 Poly Wand w/ /4 Barb $9.28 50800-5-PP-406 Poly Wand w/ 3/8 Barb $9.28 50800-2-AL-300 Aluminum Wand w/ /4 Barb $23.05 50800-2-AL-406 Aluminum Wand w/ 3/8 Barb $23.05 CP50786-PP-300 /4 Hose Barb Inlet $3.4 CP50786-PP-406 3/8 Hose Barb Inlet $3.4 CP777-2/06-BUTEF Inlet O-ring (Buna-N + Teflon) $6.6 CP777-2/06-VI Inlet O-ring (Viton) $2.3 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 99

00 Model 22670 The 22670 TriggerJet spray gun kit combines the 22650 TriggerJet spray gun with an extension wand. Maximum pressure rating is 50 PSI. 22670-PP-5-/4 (5 Wand) $52.78 22670-PP-24-/4 (24 Wand) $60.84 Spray Guns Features: /4 NPT Threaded Connections 22650 TriggerJet spray gun with choice of Trigger lock permits locking gun in an open /4 or 3/8 hose shank and a /4 NPT position for continuous flow (optional) thread inlet connection. 22665 extension wand with choice of 5 or 38720-PPB-X8 adjustable ConeJet spray 24 lengths. tip with Viton O-ring. CP22673-PP 45 o and CP22664-PP straight Accepts all standard TeeJet spray tips and adapters (other capacities available). tip strainers. Model 22650 The 22650 TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low-pressure sprayers. The TriggerJet is made of molded polypropylene for excellent chemical resistance and durability. Inlet Connection 22650-PP-/4 /4 (F) NPT $33.49 22650-PP-300 /4 Hose Shank $33.49 22650-PP-406 3/8 Hose Shank $33.49 Features: Choice of /4 or 3/8 hose shank and /4 NPT thread inlet connection. Replaceable diaphragm made of Viton Accepts all standard TeeJet Spray tips and tip strainers. Maximum operating pressure of 50 PSI Trigger lock permits locking gun in an open position for continuous flow (optional) TriggerJet Number 22670 CP22656-NY Trigger Lock, Nylon $2.35 2 CP2267-IZP Groove Pin $.50 3 CP22672-IZP Groove Pin $.50 4 CP22655-PP Trigger, Polypropylene $4.3 5 CP22658-PP Spring Retainer $2.80 6 CP22660-PHSS Spring, Stainless Steel $.55 7 CP22657-NY Stem, Nylon $2.4 8 CP22676-NEO Gasket, Neoprene $.83 9 CP22659-PP Washer, Polypropylene $2.80 0 CP2266-VI Diaphragm, Viton $5.45 CP2265-PP Body, Polypropylene $0.65 2 CP777-2-06-VI O Ring, Viton $2.3 3 CP39334-VI Gasket, Viton $.28 4A CP22654-PP Handle (/4 NPT (F) Conn.) $6.87 4B CPB22654-PP Handle (/4 BSPT (F) Conn.) $6.87 4C CP22653-/4-PP Handle (/4 Hose Shank) $6.87 4D CP22652-3/8-PP Handle (3/8 Hose Shank) $6.87 5 CP777-2-0-VI O-Ring, Viton (2) $.27 6 CP22668-PP Cap, Polypropylene (2) $.87 7 CP22663-5-FRP Extension Tube 5 $2.25 7A CP22663-24-FRP Extension Tube 24 $9.9 8 CP22664-PP Straight Adapter $2.25 9 CP38722--PP Core, Polypropylene $5.92 20 CP777-5-EPR O-Ring, EPDM $3.0 2 CP22668-PP Cap, Polypropylene $.87 22 CP3872-PP-** Tip Body, Polypropylene $6.22 38720-PPB-** Adjustable ConeJet $8.08 22665-5-PP Extension Tube Sub-Asb. 5 $3.49 (s 5, 6 & 7) 22665-24-PP Extension Tube Sub-Asb. 24 $22.46 (s 5, 6 & 7A) PK-AB22670-PP-KIT Repair Kit(Includes all items marked ) $5.45 00 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500

38720-PP Adjustable Spray Tips Adjustable Spray Tips Adjustable Spray Tips liquid Pressure in Psi AdjusTABle 20 Psi 30 Psi 40 Psi 60 Psi 00 Psi COnejeT PerfOrMAnCe n Provides adjustable TiP number setting setting liquid setting Pressure in Psi setting setting spray from solid 38720-PP AdjusTABle A 20 Psi B A 30 liquid Psi B Pressure A 40 Psi in B Psi A 60 Psi B A 00 Psi B stream to a hollow 38720-PP COnejeT PerfOrMAnCe n Provides adjustable AdjusTABle Capacity GPM TiP number 20 0.097 Psi 0.33 setting 30 0.2 Psi 0.40 setting 40 0.3 Psi 0.47 setting 60 0.6 Psi 0.57 setting 00 0.2 Psi 0.74 Provides cone adjustable pattern. setting spray from solid spray from solid COnejeT n Provides adjustable 38720-PPB-X8 PerfOrMAnCe Spray Angle 66º 7º 74º 77º 80º TiP number setting A B setting A B setting A B setting A B setting A B stream n spray Made stream to from a of hollow solid to polypropylene a hollow cone pattern material Throw Ft. 3 34 3 37 3 38 3 38 4 38 Made of polypropylene A 0.097B 0.33A 0.2B 0.40A 0.3B 0.47A 0.6B 0.57A 0.2B 0.74 stream for cone excellent to pattern. a hollow chemical resistance. Capacity GPM 0.5 0.49 0.8 0.60 0.20 0.69 0.24 0.84 0.3. 38720-PPB-X2 38720-PPB-X8 66º 7º 74º 77º material for excellent Capacity Spray Angle GPM 0.0977º 0.33 0.275º 0.40 0.377º 0.47 0.678º 0.57 0.280º 0.74 cone n n Fits Made pattern. any of /69 6 polypropylene TeeJet material 38720-PPB-X8 Spray Angle Throw Ft. Ft. 66º 3.53 36 347º 43 39 3774º 43 40 3877º 43 4 3880º 44 4 38 chemical resistance. n Made male for of excellent thread polypropylene bodies. chemical material resistance. Capacity Throw Ft. GPM 3 0.20 0.5340.68 0.493 0.24 0.8370.8 0.603 0.28 0.20380.92 0.693 0.34 0.2438. 0.844 0.42 0.338.4. Fits for andy /6-6 TeeJet male thread bodies. 38720-PPB-X2 7º 75º 77º 78º 30 o n excellent offset Fits from any /69 6 chemical horizontal TeeJet resistance. 38720-PPB-X8 Capacity Spray Angle GPM 0.56º 0.49 0.868º 0.60 0.2080º 0.69 0.2480º 0.84 0.380º. n 30 offset from horizontal incorporated into main 38720-PPB-X2 Spray Angle Throw Ft. Ft. 7º 43.5 38 3675º 44 43977º 44 42 4078º 44 42480º 64 424 n tip Fits incorporated male body. any /69 6 thread TeeJet into bodies. main tip body. Capacity Throw Ft. GPM 3.50.3 0.20360.89 0.684 0.38 0.2439. 0.84 0.43 0.2840.2 0.924 0.53 0.344.5. 4 0.68 0.424.9.4 male 38720-PPB-X8 6º 68º 80º 80º 80º n 30 thread offset bodies. from horizontal 38720-PPB-X26 Capacity Spray Angle GPM 0.2077º 0.68 0.2482º 0.8 0.2884º 0.92 0.3486º. 0.4286º.4 Ft. 4 38 4 4 4 42 4 42 6 42 incorporated into main tip body. 38720-PPB-X8 Spray Angle Throw Ft. 6º 4 34 68º 4.5 37 80º 5 38 80º 5.5 39 80º 6 40 n 30 offset from horizontal Capacity GPM 0.3 0.89 0.38. 0.43.2 0.53.5 0.68.9 38720-PPB-X** All Sizes $8.08 Throw Ft. 4 38 4 4 4 42 4 42 6 42 incorporated into main tip body. 38720-PPB-X26 Spray Angle 77º 82º liquid Pressure 84º in Psi Capacity GPM 0.3 0.89 0.38. 0.43.2 0.53 86º.5 0.68 86º.9 38720-PPB-X26 AdjusTABle Spray Angle Throw Ft. 77º 4 3482º 4.5 3784º 5 3886º 5.5 3986º 6 40 COnejeT PerfOrMAnCe 20 Psi 30 Psi 40 Psi 60 Psi 00 Psi 50 Psi 5500 Throw Ft. 4 34 4.5 37 5 38 5.5 39 6 40 TiP number setting setting setting liquid Pressure setting Psi setting setting Knurled 5500 body of tip rotates AdjusTABle A 20 Psi B A 30 Psi Bliquid A Pressure 40 Psi B in A Psi 60 Psi B A 00 Psi B A 50 Psi B through Knurled a half body turn to of provide COnejeT PerfOrMAnCe AdjusTABle TiP number Capacity GPM 20 Psi setting.049 30.05 Psi setting.06 40.07 Psi setting.07 60.02 Psi setting.08600.025 Psi setting. 50.028 Psi setting.4 spray tip 5500 selection rotates from through wide angle, COnejeT PerfOrMAnCe TiP number 5500-X finely a A B A B A B A B A B A B 5500 atomized half turn cone to provide spray to a straight stream spray. Spray Angle setting setting 38 setting 54 setting 7 setting 80 setting 83 Knurled body of Tip settings spray selection tip rotates A and through B from represent wide angle, two extreme finely points of Throw Ft. Capacity GPM A B 9.049 A.05 B 22.06 A.5.07 B 24.07 A.5.02 B 26.086 A.5.025 B 26. A.5.028 B 26 Knurled body of.4 rotation atomized tip rotates a half in tip turn through adjustment. cone spray to provide Other to a sizes straight available. stream Capacity GPM.025.09.03..033.3.04.6.05.20.058.25 5500-X Capacity Spray GPM Angle.049.05 38.06.07 54.07.02 7.086.025 80..028 83.4 spray. Tip settings A and B represent 5500-X2 Spray Angle 40 60 68 75 80 83 a half spray selection from wide angle, finely 5500-X two turn extreme to provide points Description of rotation in tip Spray Angle Throw Ft. 9 38 22 54.5 24 7.5 26 80.5 26 83.5 26 atomized cone spray to a straight stream Throw Ft..5 23.5 26 2 27 2 28 2 28 2 28 spray Capacity Throw Ft. GPM.025 9.09.03 22..5.033 24.3.5.04 26.6.5.05 26.20.5.058 26.25 5500-X** adjustment. selection Other from All wide sizes Sizes angle, available. (Brass) finely $24.0 atomized spray. cone Tip settings spray to A a straight and B represent stream 5500-X3 Capacity GPM.037.3.045.7.05.9.058.23.073.30.088.37 5500-X2 Capacity Spray GPM Angle.025 40.09.03 60..033 68.3.04 75.6.05 80.20.058 83.25 spray. two Tip extreme settings points A and of B rotation represent in tip Spray Angle 57 68 72 76 80 82 5500-X2 5500-PPB-X3 Spray Angle Throw Ft. 40.5 23 60.5 26 68 2 27 75 2 28 80 2 28 83 2 28 adjustment. Other sizes available. 5500-PP two extreme points of rotation in tip Throw Ft. 2 27 2 30 2 3 2 3 3 3 3 3 5500-X3 Capacity Throw Ft. GPM.5.037 23.3.5.045 26.72.05 27.92.058 28.232.073 28.302.088 28.37 adjustment. Other sizes available. The 5500 adjustable ConeJet Capacity GPM.05.8.058.22.067.25.08.3.0.40.2.49 5500-X3 Capacity Spray GPM Angle.037 57.3.045 68.7.05 72.9.058 76.23.073 80.30.088 82.37 5500-PPB-X3 tip is also available in a 5500-X4 Spray Angle 6 70 73 77 80 8 Spray Angle Throw Ft. 57 2 27 68 2 30 72 2 3 76 2 3 80 3 3 82 3 3 5500-PPB-X3 polypropylene version. The Polypropylene Throw Ft. 2.5 30 2.5 33 3 34 3 34 3 34 3 34 Capacity Throw Ft. GPM 2.05 27.82.058 30.222.067 3.252.08 3.33.0 3.403.2 3.49 tip has the same performance characteristics as the 5500-X5 Capacity GPM.06.2.076.26.082.30.0.37.3.48.5.58 5500-X4 Capacity Spray GPM Angle.05 6.8.058 70.22.067 73.25.08 77.3.0 80.40.2 8.49 brass tip and provides excellent chemical resistance. Spray Angle 6 70 74 77 80 8 5500-X4 5500-PPB-X5 Spray Angle Throw Ft. 6 2.5 30 70 2.5 33 73 3 34 77 3 34 80 3 34 8 3 34 This tip s light weight makes it well-suited for use on Throw Ft. 2.5 3 2.5 34 3 35 3 35 3 35 3 35 5500-X5 Capacity Throw Ft. GPM 2.5.06 30.2 2.5.076 33.263.082 34.303.0 34.373.3 34.483.5 34.58 handheld 5500-PP and backpack type sprayers. 5500-X6 Capacity GPM.073.26.087.32.0.37.2.45.5.58.9.7 5500-X5 Capacity Spray GPM Angle.06 6.2.076 70.26.082 74.30.0 77.37.3 80.48.5 8.58 O-Ring: 5500-PPB-X5 The EPDM 5500 is adjustable standard, Viton ConeJet is optional tip is Spray Angle 65 7 74 77 80 80 5500-PPB-X6 Spray Angle Throw Ft. 6 2.5 3 70 2.5 34 74 3 35 77 3 35 80 3 35 8 3 35 5500-PPB-X5 also available in a polypropylene 5500-PP Description version. 5500-X6 Capacity Throw Throw Ft. Ft. GPM 2.5 2.5.073 3 32.26 2.5 3.087 34 35.323 3.0 35 36.373 3.5.2 35 36.453 3.5.5 35 36.583 3.4.9 35 36.7 The polypropylene tip has the same 5500-X8 The adjustable ConeJet tip is 5500-X6 Capacity Capacity Spray GPM GPM Angle.073.097 65.26.33.087.2 7.32.40.0.3 74.37.47.2.6 77.45.57.5.2 80.58.74.9.25 80.7.90 5500-PPB-X** All Sizes $0.94 performance charac ter istics as the brass 5500-PPB-X6 Spray Angle 66 7 74 77 80 80 The also 5500 available adjustable in ConeJet a polypropylene tip is version. Spray Angle Throw Ft. 65 2.5 32 7 3 35 74 3 36 77 3.5 36 80 3.5 36 80 3.4 36 tip and provides excellent chemical 5500-PPB-X6 5500-PPB-X8 Throw Ft. 3 34 3 37 3 38 3 38 4 38 4 38 also The available polypropylene in a polypropylene tip has the version. same 5500-X8 Capacity Throw Ft. GPM 2.5.097 32.333.2 35.403.3 36.47 3.5.6 36.57 3.5.2 36.74 3.4.25 36 resistance. This tip s light weight makes.90 The performance polypropylene charac tip has ter istics the same as the brass Capacity GPM.2.42.5.52.7.60.2.73.26.94.3.2 it well-suited for use on handheld and 5500-X8 Capacity Spray GPM Angle.097 66.33.2 7.40.3 74.47.6 77.57.2 80.74.25 80.90 tip and provides excellent chemical 5500-PPB-X8 performance charac ter istics as the brass 5500-X0 Spray Spray Angle Angle Throw Ft. 66 68 3 34 7 72 3 37 74 75 3 38 77 78 3 38 80 80 4 38 80 80 4 backpack type sprayers. 38 tip and resistance. provides This excellent tip s light chemical weight makes 5500-PPB-X8 Capacity Throw Throw Ft. Ft. GPM 3 3.2 34 35.423 3.5.5 37 38.523 3.5.7 38 39.603 4.2 38 40.734 4.26 38 40.944 4.3 38 40 O-ring: EPDM is standard,.2 resistance. Viton it well-suited optional. This tip s for light use on weight handheld makes and 5500-X2 5500-X0 Capacity Capacity Spray GPM GPM Angle.2.5 68.42.49.5.8 72.52.60.7.20 75.60.69.2.24 78.73.84.26.3 80.94..3.38 80.2.3 it well-suited backpack for type use sprayers. on handheld and 5500-X0 Spray Angle 69 73 76 78 80 80 Spray Angle Throw Ft. 68 3 35 72 3.5 38 75 3.5 39 78 4 40 80 4 40 80 4 40 backpack O-ring: type EPDM sprayers. 5500-PPB-X2 is TiP standard, setting A Throw Ft. 3.5 36 4 39 4 40 4 4 4 4 4 4 Viton is optional. 5500-X2 Capacity Throw Ft. GPM 3.5 35.49 3.5.8 38.60 3.5.20 39.694.24 40.844.3 40.4.38 40.3 O-ring: EPDM is standard, COne spray PATTern Capacity GPM.7.55.20.67.23.78.29.95.37.2.45.5 Viton is optional. 5500-X2 Capacity Spray GPM Angle.5 69.49.8 73.60.20 76.69.24 78.84.3 80..38 80.3 5500-PPB-X2 5500-X4 Spray Angle 70 74 76 78 80 80 TiP setting A Spray Angle Throw Ft. 69 3.5 36 73 4 39 76 4 40 78 4 4 80 4 4 80 4 4 5500-PPB-X2 TiP COne setting spray A PATTern Throw Ft. 3.5 37 4 40 4 4 4 4 4.5 4 4.5 4 Capacity Throw Ft. GPM 3.5.7 36.554.20 39.674.23 40.784.29 4.954.37 4.24.45 4.5 COne spray PATTern 5500-X8 Capacity GPM.2.69.26.84.30.97.37.2.47.5.58.9 Maximum 5500-X4 Capacity Spray GPM Angle.7 70.55.20 74.67.23 76.78.29 78.95.37 80.2.45 80.5 Spray Angle 7 75 77 78 80 79 Throw feet 5500-X4 5500-PPB-X8 Spray Angle Throw Ft. 70 3.5 37 74 4 40 76 4 4 78 4 4 80 4.5 4 80 4.5 4 Throw Ft. 4 38 4 4 4 42 4 42 5 42 5 42 5500-X8 Capacity Throw Ft. GPM 3.5.2 37.694.26 40.844.30 4.974.37 4.2 4.5.47 4.5 4.5.58 4.9 TiP setting Maximum B 5500-X22 Capacity GPM.26.83.32.0.37.2.45.4.58.9.70 2.3 Spray Angle 7 75 77 78 80 79 Throw feet 5500-X8 Capacity GPM.2.69.26.84.30.97.37.2.47.5.58.9 straight Maximum stream spray PATTern 5500-PPB-X8 Spray Angle 7 75 78 79 80 78 Spray Throw feet 5500-PPB-X22 Angle Throw Ft. 7 4 38 75 4 4 77 4 42 78 4 42 80 5 42 79 5 42 5500-PPB-X8 TiP setting B Throw Ft. 4 39 4.5 4 5 42 5 42 5 42 5 42 5500-X22 Capacity Throw Ft. GPM 4.26 38.834.32 4.04.37 42.24.45 42.45.58 42.95.70 42 2.3 straight TiP setting stream B spray PATTern 5500-X22 Capacity Capacity Spray GPM GPM Angle.26.3 7.83.98.32.37 75.0.2.37.43 78.2.4.45.53 79.4.7.58.68 80.9 2.2.70.83 78 2.3 2.7 straight stream spray PATTern 5500-PPB-X22 5500-X26 Spray Spray Angle Angle Throw Ft. 7 72 4 39 75 76 4.5 4 78 78 5 42 79 79 5 42 80 80 5 42 78 78 5 42 5500-PPB-X22 Maximum Throw feet Capacity Throw Throw Ft. GPM Ft. 4 4.5.3 39 40.98 4.5 5.37 4 42.25 5.43 42 43.45 5.5.53 42 43.75 5.5.68 42 43 2.25 5.5.83 42 43 2.7 Above data is based on spraying water from a height of about 5500-X26 Capacity Spray GPM Angle.3 72.98.37 76.2.43 78.4.53 79.7.68 80 2.2.83 78 2.7 2/2 feet with tip tilted about as shown at left for each setting. Maximum Throw feet 5500-X26 Spray Angle Throw Ft. 72 4.5 40 76 5 42 78 5 43 79 5.5 43 80 5.5 43 78 5.5 43 Above data is based on spraying water from a height of about Maximum Throw feet Throw Ft. 4.5 40 5 42 5 43 5.5 43 5.5 43 SPRAY 5.5 43 GUNS 5 Above 2/2 data feet is with based tip on tilted spraying about water as shown from at a left height for each of about setting. 0 2/2 feet with tip tilted about as shown at left for each setting. Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 5 ENGLISH 0

02 AA30L-22425-8 GunJet AA30L-22425 AA30L-PP Extension Length AA30L-/4 Without Extension $75.83 AA30L-22425-8 8 $9.54 AA30L-22425-8 8 $27.37 AA30L-22425-24 24 $35.0 AA30L-22425-36 36 $55.09 AA30L-22425-48 48 $74.63 AA30L-PP Poly GunJet Spray Gun No Extension $62.90 AA23L-7676-8 GunJet AA23L-7676 Extension Length AA23L Without Extension $82.6 AA23L-7676-8 8 $22.69 AA23L-7676-8 8 $30.80 AA23L-7676-24 24 $38.64 AA23L-7676-36 36 $49.82 AA23L-7676-48 48 $78.40 GunJet AA30L-22425 CP703-SS Screw, SS (7 Req d) $.65 2 CP9684--NYB Right & Left Housing Set $79.78 3 CP325 Cap, Brass $.69 4 CP7490-BRTF Valve Seat Sub-Assem. $7.3 5A 775-8 Extension, Brass - 8 $4.72 5B 775-8 Extension, Brass - 8 $8.54 5C 775-24 Extension, Brass - 24 $20.02 5D 775-36 Extension, Brass - 36 $25.34 5E 775-48 Extension, Brass - 48 $30.69 6 CP4743-TEF Gasket, Teflon $6.78 7 CP7678 Stem End, Brass $9.33 8 CP7679- Stem Guide Nut, Brass $3.72 9A CP22427-8-SS Stem, Stainless Steel - 8 $47.46 9B CP22427-8-SS Stem, Stainless Steel - 8 $5.88 9C CP22427-24-SS Stem, Stainless Steel - 24 $55.87 9D CP22427-36-SS Stem, Stainless Steel - 36 $59.70 9E CP22427-48-SS Stem, Stainless Steel - 48 $66.25 0A 22426-8 Extension Sub-Assem. 8 $57.33 0B 22426-8 Extension Sub-Assem. 8 $65.83 0C 22426-24 Extension Sub-Assem. 24 $70.90 0D 22426-36 Extension Sub-Assem. 36 $79.43 0E 22426-48 Extension Sub-Assem. 48 $84.24 CP2236 Inlet Body, Brass $4.59 2 CP4255--BU Cup Packing, Buna-N $7.77 3 CP982 Gasket, Soft Brass $5.4 4 CP98 Packing Screw, Brass $6.6 5 CP7484-SS Stem Nut, Stainless Steel $4.28 6 CP7489-SS Trigger Stop Spring $.87 7 CP7622-302SS #6 Burr, Type 302 SS $.87 8 CP7720-420SS Roll Pin, Type 420 SS $2.57 9 CP9820-420SS Roll Pin, Type 420 SS $4.47 20 CP7703-NY Trigger, Nylon $7.08 2 CP980 Trigger Guide, Brass $3.80 22 CP985 Spring Guide, Brass $.88 23 CP2238-302SS Spring, Type 302 SS $2.50 24 CP986 Spring Retainer, Brass $6.06 25 CP989-SS Washer, Type 8-8 SS $2.06 26 CP988-SS Screw, Stainless Steel $2.06 27 CP9805-CE Lock Spring Ring, Celcon $2.49 28 CP9806-NY Trigger Lock, Nylon $7.44 02 CP6054--AL Body, Aluminum $42.86 2 CP6053-2-302SS Main Spring, Stainless Steel $6.0 3 CP7480-IZP Spring Screw $6.0 4 CP749-SS Spring Stud, Stainless Steel $5.42 5 CP859-IZP Trigger Guide $2.29 6 CP7486-SS Lock Nut, Stainless Steel $6.76 7 CP607-NP Packing Screw $4.06 8 CP4255--BU Cup Packing, Buna-N $7.77 9 CP7892-IZP Key, Steel, Zinc Plated $3.73 0 CP6052-NP Inlet Body $28.04 A CP7677-8-SS Stem, S.S., (8 Extension) $26.70 B CP7677-8-SS Stem, S.S., (8 Extension) $33.00 C CP7677-24-SS Stem, S.S., (24 Extension) $43.26 D CP7677-36-SS Stem, S.S., (36 Extension) $58.24 E CP7677-48-SS Stem, S.S., (48 Extension) $76.62 2 CP7679- Stem Guide Nut, Brass $3.72 3 CP7678 Stem End, Brass $9.33 GunJet AA23L-7676 4 CP4743-TEF Gasket, Teflon $6.78 5A 775-8 Extension, Brass (8 Length) $4.72 5B 775-8 Extension, Brass (8 Length) $8.54 5C 775-24 Extension, Brass (24 Length) $20.02 5D 775-36 Extension, Brass (36 Length) $25.34 5E 775-48 Extension, Brass (48 Length) $30.69 6 CP7490-SSTEF Valve Seat $0.6 7 TP** Specify Tip VARIES 8 CP325-NP Tip Retainer $2.8 9 CP9539-INP Trigger Guard $9. 20 CP4252-INP Trigger $9.39 2 CP8038-SS Rivet, Stainless Steel (2) $.93 AB23L-7676-KIT Repair Kit (Includes all items marked ) $20.82 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500

Shutoff Valves and Spray Guns Top quality hand valves for use with spray nozzles, extensions and handles to suit your application needs. Hand valve assemblies may be made from parts shown on this page. The typical assembly shown at right includes 4727 handle, 4688 valve, 4673-8 curved extension with swivel body, TeeJet cap and flat spray tip. Valves Typical Shutoff Valve Assembly AA3 03 322 Garden Hose Adapter for 36 Valve 4688 4688 Trigger Valve with trigger lock. flow rate 2 GPM (7.6 l/min), max. pressure of 250 PSI. /4 NPT (F) inlet connection, /6-6 (M) outlet connection. Use with TeeJet and ConeJet tips, adjustable ConJet tips or MulteeJet tips. Brass Material. 4688 Trigger TeeJet Valve $56.87 6466 Trigger Valve same as 4688, less trigger lock, with extra long trigger. Brass material. 6466 Trigger TeeJet Valve $6.30 6466 604 Valves Handles Choice of valve handles - for above valves 6590 604 Trigger Valve with trigger lock. Same as 4688 except with /4 NPT (F) inlet and outlet connections. Brass material 604 Trigger TeeJet Valve $56.34 6590 Trigger Valve same as 604, less trigger lock, with extra long trigger. Brass material. 6590 Trigger TeeJet Valve $57.23 AA3 for pressures up to 500 PSI (35 bar) Comfortable palm fitting gun. For use with any TeeJet spray tip. /4 NPS (M) inlet connection. Forged brass body and nickel-plated steel trigger. Teflon valve seat and packing, stainless steel valve stem. Weight 2 oz. Also supplied as3-/4f with /4 NPT (F) inlet connection. AA3 Trigger TeeJet Valve $88.95 322 Adapter 3/8 NPT (F) outlet, 3/4 garden hose thread inlet for use with 3/8 36 valve. brass material. 322-/2 /2 Garden Hose Adapter $6.64 322-3/8 3/8 Garden Hose Adapter $6.64 4727 Sure Grip Handle brass, rubbercovered, /4 NPS (M) hose inlet connection. 4727-NP Sure Grip Handle $2.25 Extensions for Valves and Spray Guns High-Pressure Curved Extensions 9527-for pressures to,000 PSI (70 bar). Fits models 23H and 3 GunJet spray guns. Length 9527-8 8 $46.35 9527-8 8 $53.64 9527-24 24 $54.96 9527-36 36 $7.25 9527-48 48 $77.09 990-0 Swivel Swivel Connection, /4 NPT (F) inlet, /4 NPS (F) outlet. Include Gasket. Fits AA23L guns on Page 94 990-0 $20.56 CP8635-NY $.87 Swivel Gasket, Nylon 4754 Sure Grip Handle brass, rubbercovered, 3/4 garden hose thread(f)inlet connection. 4754 Sure Grip Handle $9.85 Straight and Curved Extensions 4673 and 667 - for pressures to 25 PSI (9 bar). 775 - for pressures to 250 PSI (7 bar). Fits models 23L and 3 GunJet spray guns and trigger valves. EXTENSION LENGTH STRAIGHT WITH FIXED BODY 4725 Handle made of /8 brass pipe with bushing. Slip hose over pipe to form handle. 4725 Handle $2.80 CURVED WITH SWIVEL BODY 4673 775 CURVED WITH FIXED BODY 8 775-8 $4.72 4673-8 $24.63 667-8 $7.20 8 775-8 $8.54 4673-8 $28.65 667-8 $20.97 24 775-24 $20.02 4673-24 $30.09 667-24 $2.65 30 775-30 $24.0 4673-30 $33.2 667-30 $24.49 36 775-36 $25.34 4673-36 $35.42 667-36 $27.86 48 775-48 $30.69 4673-48 $40.55 667-48 $32.22 TriggerJet Extensions 22665-PP is for use with 22650-PP TriggerJet spray gun. Maximum pressure rating of 50 PSI (0 bar). Includes straight and 45 o adapters. Available in 5 and 24 lengths. Part # Length 22665-5-PP 5 $3.49 22665-24-PP 24 $22.46 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 03

04 Spray Guns AA43 GunJet Designed and built for heavy duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant operating response. Convenient trigger-lock for continuous spraying. Number AA43L for operating pressures Exposed packing nut for easy up to 200 PSI. adjustment of packing. Number AA43H for operating pressures Available in aluminum only. up to 800 PSI. Trigger handle control: ALL MODELS have /2 NPT inlet connections. OPERATING MODEL PRESSURE NUMBER RANGE (PSI) MATERIAL LENGTH PRICE AA43L-AL-6 Up to 200 Aluminum 22 $69.60 AA43H-AL-6 200-800 Aluminum 22 $69.60 AA43L-6 Up to 200 Brass 22 $204.2 AA43H-6 200-800 Brass 22 $204.2 Hardened Stainless Steel Type D Orifice Discs Choose one of the available size interchangeable orifice disc capacities. Other sizes may be available upon request. Discs are corrosion- and erosion-resistant D** Orifice Disc $.83 **Specify Orifice Size:,.5, 2, 3, 4, 5, 6, 7, 8, 0, 2, 4, 6 SETTING A WIdE ANGLE CONE SPRAY Maximum Horizontal Throw Hardened Stainless Steel Type DX-HSS Spray Tip For spraying trees and other applications where maximum spray throw is required. SPECIAL ORDER DX-HSS** Orifice Tip $30.33 **Specify Tip Size: 5, 6, 8, 0, 2, 4, 6 SETTING C STRAIGHT STREAM SPRAY Maximum Horizontal Throw Type 43A Gunjet Spray Guns OPERATING MODEL PRESSURE NUMBER RANGE (PSI) MATERIAL LENGTH PRICE AA43LA-AL6 Up to 200 Aluminum 3 $62.43 AA43HA-AL6 200-800 Aluminum 3 $62.43 Type 43LC-/2 & 43HC-/2 Gunjet Spray Guns Types 43LC-/2 and 43HC-/2 have /2 NPT (F) outlet connections. Inlet connections are /2 NPT (F). OPERATING MODEL PRESSURE NUMBER RANGE (PSI) MATERIAL LENGTH PRICE AA43LC-/2 Up to 200 Brass 8 $64.5 AA43HC-/2 200-800 Brass 8 $64.5 04 GUNjET NUMBER AA(B)43L-AL2 AA(B)43H-AL2 AA(B)43L-AL4 AA(B)43H-AL4 AA(B)43L-AL6 AA(B)43H-AL6 AA(B)43L-AL8 AA(B)43H-AL8 AA(B)43L-AL0 AA(B)43H-AL0 ORIfICE disc NUMBER D2 D4 D6 D8 D0 PERfORMANCE LIqUId PRESSURE IN PSI 40 PSI 00 PSI 200 PSI 400 PSI 800 PSI A C A C A C A C A C Capacity GPM.29.30.45.47.64.66.90.94.3.3 Vert. Throw ft. 22 22 23 24 26 Horiz. Throw ft. 0 32 0 33 0 34 0.5 35 35 Capacity GPM.60.6.92.94.3.3.8.9 2.6 2.7 Vert. Throw ft. 26 27 28 30 32 Horiz. Throw ft. 0 36 0 36 0.5 37 39 40 Capacity GPM.2.3.9 2.0 2.7 2.9 3.8 4. 5.3 5.8 Vert. Throw ft. 3.5 33 34.5 36.5 38 Horiz. Throw ft. 0 44 0 45 0.5 46 48 50 Capacity GPM 2.0 2.5 3. 3.4 4.4 4.8 6.2 6.8 8.8 9.6 Vert. Throw ft. 33 35.5 38 40.5 42 Horiz. Throw ft. 0 45 0 46 0.5 47 49 5 Capacity GPM 2.6 3.2 4. 5.0 5.8 7. 8.2 0 0.2 4. Vert. Throw ft. 35 37.5 40 42.5 44.5 Horiz. Throw ft. 0 46 0.5 49 50.5 52 2 54 How to order: Specify complete GunJet spray gun number and material. Example: AA(B)43L-AL4 Aluminum Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 (B) = BSPT

AA43-AL-6 GunJet 05 CP325-AL Cap, Aluminum $.6 2 D-** Orifice Disc, Spicify Size $.83 3 CP4743-NY Gasket, Nylon $.9 4 CP0566-AL Nozzle Housing, Aluminum $2.92 5 0565--NY-AL Seat Plug, Plate, Washer & Core $35.04 6 CP057-3-NYB Guide Vane, Nylon $0.34 7 CP4596-NYB Gasket, Nylon (2) $.93 8 CP9238-46SS Stem, Stainless Steel $28.83 9 CP6604-AL Tubing, Aluminum $46.80 0 CP6492-AL Inlet Body, Aluminum $36.53 CP660-302SS Packing Washer, Stainless Steel $4.97 2 CP6602-LEA Packing, Leather (3), Standard $4.33 2 CP6602-TEF Packing, Teflon (3), Optional $0.9 3 CP9237-AL Packing Screw, Aluminum $6.27 4 CP6599-NP Locknut, Nickel Plated $4.24 5 CP964-INP Stem Nut $6.87 6 CP6595-SS Trigger Stop Spring $3.72 7 CP799-SS Washer, Stainless Steel $.35 8 CP6597-INP Trigger Guide $9.49 9 CP659-SS Spring Stud, Stainless Steel $4.43 20 CP6589-IZP Stop Adjustment Nut $5.80 2 CP6594-SS Spring for Stop Adjustment Nut $.99 22 CP6588-IZP Spring Screw $6. 23 CP6592-302SS Spring Guide Washer $3.0 24 CP6593--SS Main Spring (for AA43L) $6.27 24 CP6593-2-SS Main Spring (for AA43H) $6.27 25 CP4477--AL GunJet Body, Aluminum $68.38 26 CP7623-IZP Rivet (2) $.87 27 CP6509-INP Trigger $7.39 28 CP650-INP Trigger Stop $6.49 29 CP757-SS Screw, Stainless Steel $5.08 30 CP3798-INP Trigger Guard $3.7 PK-AB43-AL-KIT Spare Parts Kit (Includes items marked ) $46.76 Spray Guns AA8 GunJet Aluminum GunJet with /4 NPT (F) AA43 Inlet GunJet connection. Designed and built for heavy duty service. Stem extends MODEL through extension INLET to valve seat located NUMBER directly behind CONNECTION orifice disc MATERIAL LENGTH PRICE for drip-free shutoff and instant operating AA8-AL6 /4 (F) NPT Aluminum response. Convenient trigger-lock for continuous spraying. n Number AA43L for operating pressures 20 $96.82 up to 200 PSI. n Number AA43H for operating pressures up to 800 PSI. n Exposed packing nut for easy adjustment of packing. n Available in aluminum only. n Trigger handle control: ALL MODELS have /29 NPT or BSPT (F) inlet connections. Hardened Stainless Steel Type D Orifice Discs Choose one of five interchangeable orifice disc capacities. Other sizes may be available upon request. Discs are corrosion- and Hardened Stainless Steel Type DX-HSS Spray Tips For spraying trees and other applications where maximum spray throw is required. Write for Data Sheet 6990. CP325-AL Cap, Aluminum $.6 2 D** Type 43L & 43H Orifice Disc, Specify Size $.83 3 CP587-BU GunJet Spray Tip Guns Gasket, Buna-N $4.48 4 CP5869-AL Spray Housing, Aluminum $8.3 OPERATING MOdEL LENGTH 5 056-AL PRESSURE MATERIAL NUMBER Core, Rivet & Core Body (INCHES) Asb. $20.64 RANGE (PSI) 6 CP5872-AL Guide Sleeve, Aluminum $3.73 7 CP4597-NYB AA(B)43L-AL Up to Gasket, 200 Aluminum Nylon (2) $.93 22 8 CP5798-NY AA(B)43H-AL 200 800 Seat Plate, Aluminum Nylon $7.34 9 CP7709-302SS #0 Washer, Stainless (B) Steel = BSPT $8.28 0 CP5878-AL Tubing, Aluminum $26.48 CP5879-AL Stem, Aluminum $.06 2 CP668-AL Nut, #/4-28 Aluminum $.87 3 CP6896-AL Inlet Body, Aluminum $36.04 4 CP5882-NP Hand Grip Stud, Nickel Plated $3.59 5 CP5883-AL Packing Washer, Aluminum $.93 6 CP5809-LEA Packing, Thermo-Leather (4) $.93 7 CP58-AL Type 43A Packing Screw, Aluminum $4.24 8 CP5884-INP GunJet Spray Hand Guns Grip Collar $9.96 9 CP5994-NY Plastic Hand Grip, Nylon $.56 OPERATING MOdEL LENGTH 20 CP583-AL PRESSURE Hand Grip MATERIAL Nut, Aluminum $3.9 NUMBER (INCHES) RANGE (PSI) 2 5838-AL Hand Grip Sub-Asb $23.59 AA(B)43LA-AL Up to Includes 200 Aluminum s 4, 8, 9 & 20 3 PK-AB8-AL-KIT AA(B)43HA-AL Spare Parts 200 800 Kit (Includes Aluminum s Marked ) $27.24 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 (B) = BSPT 05

06 338-000 338-00 338-003 FEATURES FEATURES FEATURES Adjustable pattern spray gun Adjustable pattern spray gun Adjustable pattern spray gun 7 barrel 2 barrel 7 barrel 3mm nozzle 4mm nozzle 3mm nozzle /2 MNPT inlet /2 MNPT inlet /2 MNPT inlet PART NO. MAX PSI MAX GPM LIST PRICE 338-000 200 25 $262.65 338-00 200 30 $359.3 338-003 700 9 $227.98 338-003 Tree Gun REF. NO. 2 3 *4 *5 6 7 8 *9 *0 2 *3 4 5 6 QTY. REQ D. 2 PART NO. 3385-3000 9920-7602- 9920-2670-0 9920-68602-0 9920-26707-2 9920-26605-50 9920-26703-69 9920-26703-55 9920-26304-33 9920-7602-6 9920-26305-3 9920-26506-4 9920-26906-6 9920-26902-20 9920-2680-5 9920-29208-3 DESCRIPTION Nozzle (Standard) O-Ring Nozzle Holder O-Ring Nozzle Protector Locking Ferrule Barrel Stream Straightener Valve O-Ring Valve Body Spacer Adjusting Lever Screw Ferrule Insert Gun Body LIST PRICE $3.55 $3.63 $.80 $22.2 $9.3 $52.05 $26.54 $.76 $50.26 $5.90 $3.82 $6.92 $60.67 REF. NO. *7 8 9 -*20 -*2 -*22 -*23 -*24 25 -*26 27 28 29 30 3 REPAIR KITS - 3430-0460 Trigger Valve Repair Kit $52.34 * 3430-046 Gun Repair Kit $73.69 QTY. REQ D. PART NO. 9920-29902-8 9920-29607-3 9920-29702-26 9920-29003-24 9920-23602-37 9920-2330-8 9920-23603-36 9920-23602-36 9920-23304-29 9920-2360-35 9920-23003-6 9920-29507-0 9920-290- 9920-26502-45 9920-62604-7 DESCRIPTION Plastic Trigger Pin Plug Spring O-Ring Seat Valve Retainer O-Ring Pin Gasket Spring Clip Nipple Swivel Connection Hose Barb, Nut & Gasket LIST PRICE $8.25 $3.08 $9.42 $5.78 $3.28 $3.40 $6.38 $8.23 $5.53 $5.25 $9.54 $.55 06 Hudson Spray Gun High Pressure Spray Gun w/ #0 Tip Standard JD9-C 200 PSI $368.76 38505 800 PSI $2.48 385-0TV Gun Repair Kit $52.62 Poly Flooding Nozzles For Lawn Applications 38633 $55.59 38644 $55.59 Root Feeder Attachment 3899 $754.39 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 FIRE HOSE NOZZLES with or /2 Female Pipe Threads INPUT PART# SIZE PRICE FHNZ00 $74.93 FHNZ2 /2 $8.88

338-0047 Pressure Washer Spray Gun pressure: 250 psi (50 bar) flow: 7.0 gpm (26.5 lpm) temp: 20 F (98.9 C) 3/8 (F) NPT inlet; /4 (F) NPT outlet 338-0047 Spray Gun $46.40 07 Pressure Washer Parts 338-0032 Pressure Washer Spray Gun pressure: 4000 psi (280 bar) flow: 7.0 gpm, (26.5 lpm) temp: 300 F (48.9 C) 3/8 (F) NPT inlet; /4 (F) NPT outlet 338-0032 Spray Gun $60.08 Length PSI Max Lance Description 3365-0002 3000 Chrome Plated Dual Lance $22.53 3365-0004/24 24 3600 Zinc Plated Bent Single $3.25 3365-0004/36 36 3600 Zinc Plated Bent Single $38.66 3365-0004/47 47 3600 Zinc Plated Bent Single $49.69 3365-0005/24 24 3600 Zinc Plated Straight Single $27.57 3365-0005/36 36 3600 Zinc Plated Straight Single $35.53 3365-0005/47 47 3600 Zinc Plated Straight Single $43.42 Orifice Diameter High-Low Variable Fan Nozzles Nozzle Capacity (GPM) at Pump Pressure (PSI) mm inches 600 700 800 900 00 200 500 800 2000 2500 3324-200. $47.29.0.043.35.43.52.60.68.84 2.06 2.26 2.39 2.67 3324-200.5 $47.29.5.045.55.63.72.80.88 2.03 2.25 2.46 2.59 2.90 3324-200.2 $47.29.20.047.60.70.80.90 2.00 2.9 2.45 2.69 2.84 3.7 3324-200.25 $47.29.25.049.72.83.94 2.05 2.6 2.36 2.64 2.90 3.06 3.4 3324-200.3 $47.29.30.05.85.97 2..09 2.2 2.32 2.54 2.84 3.2 3.29 3.66 3324-200.35 $47.29.35.053.97 2.0 2.23 2.36 2.48 2.7 3.04 3.34 3.52 3.92 Part # /8MEG**** $2.5 /4MEG**** $3.7 *Specify Size TYPE MEG & WEG For Pressures WashJet Nozzles 400 to 4000 PSI Spray Angle 0 o 5 o 25 o 40 o /8 MEG NOZZLES /8MEG0004 /8MEG504 /8MEG2503 /8MEG4003 /8MEG0005 /8MEG505 /8MEG2504 /8MEG4004 /8MEG0006 /8MEG2505 /8MEG4005 /8MEG0007 /8MEG506 /8MEG0008 /8MEG507 /8MEG2506 /8MEG4006 /8MEG000 /8MEG508 /8MEG4007 /8MEG509 /8MEG2507 /8MEG4008 /8MEG50 /8MEG2508 /8MEG2509 /8MEG250 /8MEG255 /4 MEG NOZZLES /4MEG0005 /4MEG2504 /4MEG4002 /4MEG4003 /4MEG2505 /4MEG4004 /4MEG2506 /4MEG4006 /4MEG2507 /4MEG4007 /4MEG2508 /4MEG4008 /4MEG400 5020 $29.03 5040 $22.85 50502 $39.32 503 $34.80 DISCONTINUED LIMITED STOCK 300NCF $23.86 5070 $27.0 50500 $25.60 50503 $65.8 TUFF-GUARD The Perfect Water Hose Kink Free Working Pressure 00 psi @ 70F Burst Pressure 300 psi @ 70F Temperature -20F to +58F Male & Female garden hose fittings Length PPWH-25 PPWH-50 PPWH-00 25 50 00 $68.5 $20.70 $233.60 CGH58-25 CGH58-50 CGH58-75 CGH58-00 CGH34-25 CGH34-50 CGH34-75 CGH34-00 Grimes, IA 800-35-587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 Contractors Garden Hose Assemblies Max Pressure - 50 PSI Size 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 Length 25 50 75 00 25 50 75 00 $8.4 $40.90 $87.37 $290.83 $27.92 $74.8 $29.56 $39.45 07