Industrial and Hazardous Lighting

Typhoo Tea Merseyside Industrial and Hazardous Lighting

Industrial Contents Industrial LED High-Bay... 33 Litex LED... 341 Litex LED IP20... 345 Linergy LED... 348 Linergy II... 355 4 Industry... 359 Alfalux High-Bay LED... 362 Pacemaker 2... 365 Lowbay... 369 Tufflite Plus LED... 32 Tufflite LED... 34 Tufflite TFW IP66... 39 Tufflite TFC IP66... 383 Patriot 2 / LED... 38 Hazardous Area... 391 LIGHTING SOLUTIONS www.eaton.eu 335

O Kane Foodservice Lisburn, Northern Ireland 336 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial LED High-Bay LED High-Bay IP20 W A R R A N T Y YEAR This unique luminaire presents the market with a revelation in cold store and high bay lighting. Purpose designed for operation in a wide ambient temperature range, this luminaire blends cutting edge LED technology with innovative and functional styling. Offered with cool white LEDs, the range is a high performance alternative to traditional HID luminaires, boasting significant through life advantages to the customer. Optical performance is enhanced with a choice of racking aisle or open area lens and reflector options. The light output can be tailored to the application through separate switching of the LED arrays. Excellent thermal management is achieved through the use of liquid filled heatpipes, drawing heat rapidly from the LEDs, these are in turn cooled via an array of cooling fins. The range is completed with emergency variants providing a comprehensive LED lighting solution. Ideal for cold stores down to -30 C, though equally suited to ambient up to +30 C Instant white light, no restrike or run up delay Long life cutting edge LED technology means zero lamp changes Energy efficient Compact and robust die-cast aluminium housing Racking aisle or open area optics maximising spacing and uniformity High mounting height capability Integrated emergency option, a benefit over HID solutions Choice of output through switching or dimming of LED arrays LIGHTING SOLUTIONS www.eaton.eu 33

Industrial LED High-Bay Lamp and Control Gear Options Multi-die LED chip array High frequency control gear as standard Materials Aluminium housing finished in white RAL9016 powder coat paint finish Clear polycarbonate optical lens Aluminium reflector Gearbox - mild steel in white RAL9016 powder coat paint finish Installation Notes 4 x 9mm diameter holes to allow surface mounting or suspension via suitable chain, wire or drop rods Fused as standard For operation in ambient temperatures of -30 C to +30 C The IP20 remote gear box must be located in an ambient of +5 C to +25 C 1m lead supplied fitted to luminaire head for direct connection to the remote gear box Lens retained with M4 screws 100mm length of conduit supplied to protect wiring through mounting surface to remote gear box Installations using the rack optic should be installed with the length of the luminaire running parallel with the length of the aisle Photometric Data Cat. No. HBL1-WCW-R LOR: 100% ULOR: 100% DLOR: 100% SHR nom: 0.50 SHR max: 0.54 Remote gearbox Emergency remote gearbox Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 62 2 9 84 91 96 99 103 105 30 55 65 2 8 86 91 94 99 102 10 50 60 6 3 81 8 91 96 100 50 50 20 61 0 82 88 92 95 99 101 30 54 64 1 6 83 88 91 96 99 10 50 59 66 2 80 85 88 93 96 30 50 20 59 68 5 9 85 89 92 95 9 30 54 63 0 5 81 86 89 93 95 10 49 59 66 1 8 83 86 91 94 0 0 0 4 56 63 68 5 9 82 86 89 BZ-Class 3 3 3 3 3 3 3 3 3 See page 532 for design guide Options Integrated 3hr maintained emergency option and high output option Output selection via switching and/or 1-10V dimming of the LED arrays. Select the appropriate gear box for the required function Racking aisle or open area optic choices Project specific optics can be developed where appropriate Specification To specify state: High performance LED luminaire, Aluminium housing with white RAL9016 powder coat finish, reflector and clear polycarbonate optical lens, suitable for surface or suspended mounting (ideal for coldstores), as Eaton s High-Bay LED luminaire, part no. 338 LIGHTING SOLUTIONS www.eaton.eu

Industrial LED High-Bay Dimensions 1 1 480 100 325 290 319 469 315 Luminaire head unit Standard remote gearbox Emergency remote gearbox Catalogue Numbers Lamp Option Cat No Description Weight (kg) Lumen Output LED Array HBL1-WCW-R LED High-Bay IP65 (Rack optic) 6.3 8812 LED Array HBL1-WCW-M LED High-Bay IP65 (Medium optic) 6.3 9040 LED Array HBL1-WCW-W LED High-Bay IP65 (Wide optic) 6.3 9063 - HBL1-GB Remote gear box (IP20) 3.0 - - EBHBL1-GB Remote gear box with emergency (IP20) 3.3 - - HBL1-GBD Remote gear box with Dimming (IP20) 3.0 - - EBHBL1-GBD Remote gear box with Dimming and Emergency (IP20) 3.3 - - EBHOHBL1-GB Remote gear box with high output emergency (IP20) 3.6 - For further information contact our technical support and application department on 01302 303240 or email LightingTechnicalUK@Eaton.com LIGHTING SOLUTIONS www.eaton.eu 339

Arla Foods Aylesbury 340 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Litex LED Litex LED CONTROLS W A R R A N T Y YEAR This versatile industrial LED luminaire is ideally suited to all industrial and warehouse applications. It is offered with a choice of lumen packages controlled by open area, rack aisle or narrow distribution reflector options and is designed to accommodate different mounting heights and installation methods resulting in a luminaire system that can be tailored to virtually any application. The variable length housing accommodates integral control gear and sensor controls when necessary. Energy savings can be further enhanced by the use of occupancy detection, dimmable control gear and/ or switching arrangements to minimise electricity consumption. These are benefits over traditional discharge lamps where controls are limited. The highly efficient LED multi-die arrays deliver excellent performance and efficacy, combined with the excellent thermal management and driver compatibility the LEDs deliver a long, virtually maintenance free, 50,000 plus hours LED life at L0. Ideal for cold stores down to -30 C, though equally suited in ambient up to +30 C Instant white light, no re-strike or run up delay are distinct advantages over HID solutions No lamp changes provides virtually maintenance free operation, long LED life, ~5. years operating 24/ Compact and robust die cast and extruded aluminium housing Racking aisle or open area optic choice to maximise spacing and uniformity Variable mounting heights, ideal for warehouse racking and marshalling areas - suitable from 2.5m to 14m+ Choice of lumen packages from multi-die LED arrays 5000K cool white multi-die LED technology with 65 CRI or 80 CRI options Emergency versions available with two optic choices to suit mounting heights up to 25m LIGHTING SOLUTIONS www.eaton.eu 341

Industrial Litex LED Lamp and Control Gear Options 1, 2, 3 or 4 multi-die LED arrays 5000K cool white 65 CRI or 80 CRI 00mA drive current with HF, DALI or 1-10V Specification To specify state: High performance Linear LED luminaire, 1/2/3/4 LEDs, extruded aluminium housing with white RAL9016 powder coat finish, Wide/Narrow/Rack reflector and clear polycarbonate optical lens, suitable for surface or suspended mounting (ideal for cold stores), as Eaton s Litex LED range part no Materials Die cast and extruded aluminium housing components in white RAL9016 powder coat finish Clear TPa polycarbonate lens Aluminium reflectors Internal geartray - mild steel in white RAL9016 powder coat finish Photometric Data 14mm 165mm 14mm 165mm Installation Notes Multi-function brackets supplied allow trunking mount, drop rod or chain suspension Quick fit surface mount bracket available as an accessory Fused as standard For operation in ambient temperatures of -30 C to +30 C Emergency versions must be operated in an ambient of +5 C to +25 C to keep the batteries within operating temperatures 2m lead supplied fitted to luminaire head at the gear area end Installations utilising the rack optic should be installed with the length of the luminaire running parallel with the length of the aisle Sensor versions available - S version is IP20 rated and suits up to 12m mounting height, D version is IP65 rated and suitable for up to 5m mounting height Be aware of breaker ratings and cabling for inrush current on LED products. Refer to controls section page 528 Litex LED - Wide Optic SHR nom: 1:1.25 SHR max: 1:1.3 Dimensions 200mm 200mm 20mm 20mm Litex LED - Narrow Optic SHR nom: 1:1.25 SHR max: 1:1.26 150mm 150mm 200mm X Number of Cells (Max 4 Cells) 200mm X Number of Cells (Max 4 Cells) Litex LED - Rack Optic SHR nom: 1:0.5 SHR max: 1:0.2 540mm Control Gear 540mm Control Gear 540mm 540mm Control Gear Control Gear 14mm Options Integral emergency options available with 2 optics for different mounting heights: EL prefix for up to 9m, ELH prefix for 9 to 25m HF fixed output and DALI or 1-10V dimmable control gear options to maximise energy efficiency Racking aisle, wide open area and narrow distribution reflector choices Project specific optics can be developed where appropriate PIR occupancy sensors: S sensor is IP20 rated and suits operation down to -40 C ideal for cold store applications, suits up tp 12m mounting height. D sensor is IP65 rated and ideal for mounting heights 200mm of up to 5m Choice of up to 4 multi-die LEDs, all driven at 00mA 165mm 150mm Weight (kg) 1 Chip: 6. 2 Chip:. 3 Chip: 8. 4 Chip: 9. 540mm Control Gear 20mm 200mm X Number of Cells (Max 4 Cells) 540mm Control Gear 342 LIGHTING SOLUTIONS www.eaton.eu

Industrial Litex LED Catalogue Numbers Emergency 1 Range 3 No of LEDs Drive Current Optic LED Colour 4 Control Gear Options EL = 3hr LTX = 1 = 1 LED 3 = 00mA W = Wide Reflector Optic 1 = 5000K Ra65 Z = High frequency fixed output EC2 = EasiCheck2 Maintained Litex LED 2 = 2 LEDs N = Narrow Reflector Optic 2 = 5000K Ra80 DD = DALI Digital Dimming IS = Self Test <9 Mounting 3 = 3 LEDs R = Rack Aisle Reflector Optic R = 1-10V Dimming Height 4 = 4 LEDs ELH = 3hr Maintained 9-25m Mounting Height Please ensure hyphen is included in the part number PIR 2 S = PIR Sensor (IP20) D = PIR/Photocell Sensor (IP65) 1 Emergency versions have a dedicated LED activated in emergency mode with a choice of 2 optics to suit the mounting height 2 The S prefix PIR switching sensor is IP20 rated and therefore will effect the overall IP rating of the luminaire, operates down to -30 C The D prefix sensor is IP65 rated and suitable for up to 5m mounting heights, operating temperature 0 C to +30 C 3 All standard luminaires are IP65 rated - also refer to note 2 4 Alternative colour temperature and CRI options may be considered - this will be to special order Note: Higher CRI variants will have a reduced lumen output Luminaire Example Lamp Option Colour Finish Optic Cat No Description 2 x LED White Wide LTX2-3W1Z Litex LED 2 LED, 00mA, Wide Reflector, 5000K 65CRI, HF Control Gear Performance Data (5000 K, 65 CRI LED) LED Quantity Circuit Watts (W) Lumen Output (lm) Wide optic Narrow optic Rack optic Llm/cW Lumen Output (lm) Llm/cW Lumen Output (lm) 1 39 4020 103.0 3866 99.1 352 91.5 2 83 8035 96.8 29 93.1 139 86.0 3 124 12044 9.1 11585 93.4 1000 86.3 4 166 16055 96. 15440 93.0 1426 85.9 Llm/cW Performance Data (5000 K, 80 CRI LED) LED Quantity Circuit Watts (W) Lumen Output (lm) Wide optic Narrow optic Rack optic Llm/cW Lumen Output (lm) Llm/cW Lumen Output (lm) 1 39 3468 88.9 3335 85.5 3080 8.9 2 83 6933 83.5 660 80.3 6158 4.2 3 124 10392 83.8 9995 80.6 9232 4.6 4 166 13858 83.5 13320 80.2 12310 4.2 Llm/cW LIGHTING SOLUTIONS www.eaton.eu 343

Arla Foods Aylesbury 344 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Litex LED IP20 Litex LED IP20 CONTROLS IP20 W A R R A N T Y YEAR This versatile industrial LED luminaire is ideally suited to all industrial and warehouse applications. It is offered with a choice of lumen packages controlled by open area, rack aisle or narrow distribution reflector options and is designed to accommodate different mounting heights and installation methods resulting in a luminaire system that can be tailored to virtually any application. The variable length housing has a rear mounted gearbox with first fix mounting plate for ease of installation. Sensor options are also integrated into the housing. Energy savings can be further enhanced by the use of occupancy detection, dimmable control gear and/or switching arrangements to minimise electricity consumption. These are benefits over traditional discharge lamps where controls are limited. The highly efficient LED multi-die arrays deliver excellent performance and efficacy, combined with the excellent thermal management and driver compatibility the LEDs deliver a long, virtually maintenance free 50,000+ hours LED life at L0. High performance LED arrays with a choice of lumen packages Ideal for a range of ambient temperatures from -30 C to +30 C Instant white light, no re-strike or run up delay are distinct advantages over HID solutions No lamp changes provides virtually maintenance free operation, long LED life, ~5. years operating 24/ Compact and robust extruded aluminium heatsink and steel housing structure First fix mounting plate and plug and socket connection for rapid installation and maintenance Racking aisle or open area optic choice to maximise spacing and uniformity Variable mounting heights, ideal for warehouse racking and marshalling areas - suitable from 2.5m to 14m+ 5000K cool white multi-die LED technology with 65 CRI or 80 CRI options Emergency versions available with two optic choices to suit mounting heights up to 25m Clear panel option for ease of cleaning / LED protection LIGHTING SOLUTIONS www.eaton.eu 345

Industrial Litex LED IP20 Lamp and Control Gear Options 1, 2, 3, 4, 5 or 6 multi-die LED arrays 5000K cool white 65 CRI or 80 CRI options 00mA drive current with HF, DALI or 1-10V Materials Steel housing and extruded aluminium heatsink components in white RAL9016 powder coat finish Clear TPa polycarbonate lens (option) High purity aluminium reflectors Specification To specify state: High performance Litex LED IP20 luminaire, 1/2/3/4/5/6 LEDs, steel and extruded aluminium housing with white RAL9016 powder coat finish, Wide/Narrow/Rack reflector and clear polycarbonate lens option, suitable for surface or suspended mounting, as Eaton s Litex LED IP20 range part no Photometric Data Installation Notes Multi-function fixing features allow surface, trunking mount, drop rod or chain suspension Fused as standard For operation in ambient temperatures of -30 C to +30 C Emergency versions must be operated in an ambient of +5 C to +25 C to keep the batteries within operating temperatures First fix mounting plate enables rapid and simple installation Plug and play connection to the gearbox Installations utilising the rack optic should be installed with the length of the luminaire running parallel with the length of the aisle Sensor versions available - S version suits up to 12m mounting height, D version is suitable for up to 5m mounting height U version is suitable for up to 16m, M version is suitable for up to 12m height Communicating sensor versions available for a range of mounting heights up to 16m (refer to page 492) Be aware of breaker ratings and cabling for inrush current on LED products. Refer to controls section page 528 Options Integral emergency options available with 2 optics for different mounting heights: EL prefix for up to 9m, ELH prefix for 9 to 25m HF fixed output and DALI or 1-10V dimmable control gear options to maximise energy efficiency Racking aisle, wide open area and narrow distribution reflector choices Project specific optics can be developed where appropriate PIR occupancy sensors: S sensor is IP20 rated and suits operation down to -40 C ideal for cold applications, suits up tp 12m mounting height D sensor is ideal for mounting heights of up to 5m U sensor is suitable for up to 16m heights M sensor is suitable for up to 12m heights Choice of up to 6 multi-die LEDs, all driven at 00mA Clear TPa polycarbonate panel option available for ease of cleaning and LED protection Litex LED IP20 - Wide Optic SHR nom: 1:1.25 SHR max: 1:1.3 Dimensions Litex LED IP20 - Narrow Optic SHR nom: 1:1.25 SHR max: 1:1.26 L1 Litex LED IP20 - Rack Optic SHR nom: 1:0.5 SHR max: 1:0.2 W 9mm + 3mm for panel versions 10mm Option L1 (mm) W (mm) Weight (kg) 1 LED 603 166 6.1 2 LEDs 603 166 6.3 3 LEDs 6 166.0 4 LEDs 8 166. 5 LEDs 1150 166 9.6 Note: Emergency versions add 150mm to L1 Integrated sensor options also add 150mm to L1 6 LEDs 680 340 10.5 Sensors will be integrated at the opposite end to any emergency optic Emergency adds 0.95kg to the weight U and M sensors add 0.5kg to the weight Litex LED IP20 - Rapid Fit Connections and Multi-Function Mounting Features 346 LIGHTING SOLUTIONS www.eaton.eu

Industrial Litex LED IP20 Catalogue Numbers Emergency 1 Range 3 No of LEDs Drive Current IP Rating3 LED Colour 4 Control Gear Options EL = 3hr LTX = 1 = 1 LED 3 = 00mA 20 = IP20 1 = 5000K Ra65 Z= High frequency fixed output EC2 = EasiCheck2 Maintained Litex LED 2 = 2 LEDs 2 = 5000K Ra80 DD = DALI Digital Dimming IS = Self Test <9 Mounting 3 = 3 LEDs Optic R = 1-10V Dimming Height 4 = 4 LEDs W = Wide Reflector Optic ELH = 3hr 5 = 5 LEDs N = Narrow Reflector Optic Maintained 6 = 6 LEDs R = Rack Aisle Reflector Optic 9-25m Mounting Panel Option5 Height P = PC Panel PIR 2 S = PIR Sensor (IP20) D = PIR/Photocell Sensor U = 16m PIR/Photocell M = 12m PIR/Photocell 1 Emergency versions have a dedicated LED activated in emergency mode with a choice of 2 optics to suit the mounting height 2 The S prefix PIR switching sensor is IP20 rated, operates down to -30 C The D prefix sensor is suitable for up to 5m mounting heights, operating temperature 0 C to +30 C The U or M prefix PIR/photocell sensor is IP40 rated, suits up to 16m or 12m height respectively, 0 C to +30 C operating temperature and can be switching or dimming subject to control gear choice 3 All standard luminaires are IP20 rated 4 Alternative colour temperature and CRI options may be considered, this will be to special order Note: Higher CRI variants will have a reduced lumen output 5 Clear panels will reduce the lumen output slightly (by 10%) Luminaire Example Lamp Option Colour Finish Optic Cat No Description 2 x LED White Wide LTX2320W2Z Litex LED IP20 2 LED, 00mA, Wide Reflector, 5000K 80CRI, HF Control Gear Performance Data (5000 K, Ra65) LED Quantity Circuit Watts (W) Lumen Output (lm) Wide optic Narrow optic Rack optic Llm/cW Lumen Output (lm) Llm/cW Lumen Output (lm) 1 39 4805 123.0 4596 11.8 4120 105.6 2 83 9599 115.6 9282 111.8 8234 99.2 3 124 14390 116.0 1365 111.0 12345 99.5 4 166 19185 115.5 18350 110.5 16460 99.1 5 195 23980 122.9 22545 115.6 2053 105.5 6 234 2880 122.9 2535 11.6 24693 105.5 Performance Data (5000 K, Ra80) LED Quantity Circuit Watts (W) Lumen Output (lm) Llm/cW Wide optic Narrow optic Rack optic Llm/cW Lumen Output (lm) Llm/cW Lumen Output (lm) 1 39 4146 106.3 3965 101.6 3555 91.1 2 83 8282 99.8 922 95.4 104 85.6 3 124 12416 100.1 118 95.8 10652 85.9 4 166 16554 99. 15833 95.4 14202 85.5 5 195 20691 106.1 19453 99. 151 91.0 6 234 24833 106.1 2359 101.5 2130 91.5 5 LED version is a linear format, the 6 LED version is a 3 x 2 arrangement. Please contact our technical support team for further details on 01302 303240 or email LightingTechnicalUK@Eaton.com Llm/cW LIGHTING SOLUTIONS www.eaton.eu 34

WARRANTY Industrial Linergy LED Linergy LED IP20 CONTROLS W A R R A N T Y YEAR Eaton s commitment to supplying energy saving innovative products is the driving force behind Linergy LED. Linergy LED follows in the tradition of our highly efficient large space luminaires which have the performance and flexibility for today s multi-use, multi occupancy locations. Offering both a range of lumen outputs and light distribution, Linergy LED variants can be used seamlessly alongside each other to give a complete solution in complex spaces. High lumen outputs and corresponding class leading efficacies, when combined with occupancy and daylight sensors offer the real possibility of substantial energy savings for the end user. Three light distribution models, wide area, narrow and rack, means the highest utilisation of light, where it is most effective. Utilisation of LED light engine technology allows for an increased energy efficiency - up to 115Llm/cW Excellent light transmission and LED source obscurity from opal diffuser Enhanced Capital Allowance (ECA) Compliance across the complete range Three reflector options allowing complete flexibility for the required application Integral emergency available which allows mounting to a maximum height of 20m Low, mid and high bay integral programmable occupancy detector variants available to maximise performance and coverage DALI dimming options available for increased comfort, lighting control and energy savings Wire guard option for increased security in environments where impact resistance is needed 348 LIGHTING SOLUTIONS www.eaton.eu

Industrial Linergy LED Lamp and Control Gear Options High efficacy linear LED light engines >80 CRI 4000 K Energy efficient control gear as standard DALI dimmable options available Materials Body full box steel construction powder coated in RAL 9016 white finish Reflectors faceted finish (wide area) and satin finish (Narrow and Rack) zero iridescence anodised aluminium Wire guard heavy duty zinc plated steel, 25mm grid size Installation Notes Suitable for ceiling, conduit, chain, rod and trunking mounting Quick fit mounting brackets to fix to mounting surface Supplied with diffuser and light engines pre-fitted, no need to remove during installation Access flap on the rear of housing to aid wiring during installation Fused as standard Wire guard is a retrofit accessory secured by screws, hangs for ease of maintenance Options Fully integral emergency conversion, 3 hour duration Emergency versions available with automatic test functionality as an option, reducing maintenance costs and offers ease of compliance with testing requirements Suitable for use on defined escape routes Wide area, narrow and rack reflector options provide efficient utilisation for specific applications Lighting control options including integrated occupancy and daylight detectors for mounting up to 16m We offer a range of product support contracts to aid commissioning, reduce your maintenance costs, comply with legislative test requirements and increase the lifespan of your lighting equipment Specification To specify state: Surface mounted, LED high/low bay luminaire, of full box welded construction with post coat powder paint finish, high performance faceted/satin reflectors for Wide Area/Narrow/ Rack with high output light engines and integrated emergency sensor/wire guard options, as Eaton s Linergy LED range, part no. Photometric Data Dimensions Dimensions 6mm Cat. No. LNLA1504KZ LO: 15065lm SHR nom: 1.25 SHR max: 1.341 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 69 9 85 90 95 99 102 105 10 0 30 20 63 3 9 84 91 95 98 102 105 0 10 20 58 68 5 80 8 92 95 100 103 50 50 20 6 83 8 93 96 98 101 103 50 30 20 62 2 8 83 89 93 95 99 101 50 10 20 58 6 4 9 85 90 93 9 99 30 50 20 66 5 81 85 90 93 95 98 100 30 30 20 61 1 81 8 90 93 96 98 30 10 20 5 6 3 8 84 88 91 94 96 0 0 0 55 65 1 5 81 84 8 90 92 BZ-class 2 2 2 2 2 2 2 2 2 Nominal Lengths Nominal Length (L) 4' Lengths 1142mm 6' 1200mm 104mm 1800mm L (mm) Length (L) 1142mm 104mm 358mm Cat. No. LNLR1504KZ LO: 23032lm SHR nom: 0.50 SHR max: 0.63 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 6 84 88 95 99 101 105 10 0 30 20 60 0 8 83 90 94 98 102 104 0 10 20 55 66 3 8 86 91 94 99 102 50 50 20 65 5 81 86 92 95 98 101 103 50 30 20 59 69 6 81 88 92 95 99 101 50 10 20 55 65 2 84 89 92 96 99 30 50 20 64 3 9 83 89 92 95 9 99 30 30 20 59 68 5 9 86 89 92 95 98 30 10 20 55 64 1 6 83 8 90 94 96 0 0 0 53 62 69 3 9 83 86 89 91 BZ-class 2 2 2 2 2 2 2 2 2 Integral Emergency and Sensor Option Cat. No. LNLN1504KZ LO: 15309lm SHR nom: 1.00 SHR max: 1.098 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 0 80 86 90 96 100 102 105 108 0 30 20 64 4 80 85 91 96 99 102 105 0 10 20 59 69 6 81 88 92 95 100 103 50 50 20 69 8 84 88 93 96 99 102 103 50 30 20 63 3 9 83 89 93 96 99 101 50 10 20 59 69 5 80 86 90 93 9 100 30 50 20 6 6 81 85 90 93 95 98 100 30 30 20 62 2 82 8 91 93 96 98 30 10 20 59 68 4 8 84 88 91 94 9 0 0 0 5 66 2 6 81 85 8 90 92 BZ-class 2 2 2 2 2 2 2 2 2 LIGHTING SOLUTIONS www.eaton.eu 349

Industrial Linergy LED Emergency Operation Linergy LED has the option of an integral emergency light built centrally into the body of the luminaire. Utilising the efficient Eaton optical system, capital and installation costs are reduced with class leading spacings achievable. Two variants allow for maximised performance in the space, up to 10m mounting height and up to 20m mounting height. For applications up to 10m mounting height, the optic distribution is a square footprint allowing the designer scope for achieving compliance with reduced quantities of emergency points. For applications with mounting heights above this, up to 20m, the optic is designed to be elongated in one plane. This allows optimum spacing, following the linear installation direction. For application mounting heights of up to 10m the standard variant should be used, the prefix is ELL. Emergency operation for mounting heights up to 20m, the prefix ELH should be used. See the catalogue numbers for more detail. 10m mounting height - square distribution 20m mounting height - elongated linear distribution Detection Energy saving is key to sustainable buildings and businesses. By adopting a clear strategy for managing the occupancy and absence in a space, significant savings may be achieved in energy usage. Application dependent, savings against constant illumination can be up to 0%. Standard high frequency PIRs have a daylight linking function, with thresholds determinable by the user, as well as a switching function. In DALI luminaires, the PIRs have a daylight linking function, with thresholds determinable by the user, as well as a full dimming function. 350 LIGHTING SOLUTIONS www.eaton.eu

Industrial Linergy LED Linergy LED offers three standard options for PIR detection mounting heights. Up to 3 metres, 9 metres and 16 metres. The 3m detector boasts a high sensitivity micro detection range. The aspect ratios and coverage are shown on the diagrams to aid in scheme design. up to 3m mounting height Aspect ratio Macro = 4:1 Micro = 2.8 :1 3.0m 8.4m Micro Macro 12m Macro up to 9m mounting height Aspect ratio 2:1 9m 19m up to 16m mounting height Aspect ratio 1.9:1 16m 30m LIGHTING SOLUTIONS www.eaton.eu 351

Industrial Linergy LED Accessories Catalogue Numbers Description Wire guard - 1200lm Wire guard - 1800lm Infrared user controller Infrared programmer Digital 2 way programmer Rear mounting brackets Luminaire Efficacy Variant Lumen output Wattage (w) Wide Area Cat No LNLWG4 LNLWG6 LCSQC LCSQS LCSQSP LNLMB Llm/cW LNLA1504KZ 15065 144 104.62 LNLA2254KZ 2285 210 108.5 Narrow LNLN1504KZ 15309 144 106.31 LNLN2254KZ 23032 210 109.68 Rack LNLR1504KZ 14808 135 109.69 LNLR2254KZ 22960 198 115.96 Digital 2 way programmer Infrared programmer Infrared user controller Wire guard Mounting bracket detail Rear mounting brackets 352 LIGHTING SOLUTIONS www.eaton.eu

Industrial Linergy LED Catalogue Numbers Nominal Length Optic Cat No. Weight (Kg) Emergency Cat No. Weight (Kg) Standard Luminaires 1200mm Wide Area Reflector LNLA1504KZ 5.5 ELLNLA1504KZ 6.2 1800mm Wide Area Reflector LNLA2254KZ 8.1 ELLNLA2254KZ 9.0 1200mm Narrow Reflector LNLN1504KZ 5.5 ELLNLN1504KZ 6.2 1800mm Narrow Reflector LNLN2254KZ 8.1 ELLNLN2254KZ 9.0 1200mm Rack Reflector LNLR1504KZ 5. ELLNLR1504KZ 6.4 1800mm Rack Reflector LNLR2254KZ 8.2 ELLNLR2254KZ 9.1 Emergency Luminaire - for mounting heights up to 20m 1200mm Wide Area Reflector - - ELHLNLA1504KZ 6.2 1800mm Wide Area Reflector - - ELHLNLA2254KZ 9.0 1200mm Narrow Reflector - - ELHLNLN1504KZ 6.2 1800mm Narrow Reflector - - ELHLNLN2254KZ 9.0 1200mm Rack Reflector - - ELHLNLR1504KZ 6.4 1800mm Rack Reflector - - ELHLNLR2254KZ 9.1 Luminaire with switching high level sensor (up to 16m mounting height) 1200mm Wide Area Reflector ULNLA1504KZ 5. ELHULNLA1504KZ 6.4 1800mm Wide Area Reflector ULNLA2254KZ 8.5 ELHULNLA2254KZ 9.4 1200mm Narrow Reflector ULNLN1504KZ 5. ELHULNLN1504KZ 6.4 1800mm Narrow Reflector ULNLN2254KZ 8.5 ELHULNLN2254KZ 9.4 1200mm Rack Reflector ULNLR1504KZ 5.9 ELHULNLR1504KZ 6.6 1800mm Rack Reflector ULNLR2254KZ 8.6 ELHULNLR2254KZ 9.5 Luminaire with switching medium level sensor (up to 9m mounting height) 1200mm Wide Area Reflector MLNLA1504KZ 5. ELMLNLA1504KZ 6.4 1800mm Wide Area Reflector MLNLA2254KZ 8.5 ELMLNLA2254KZ 9.4 1200mm Narrow Reflector MLNLN1504KZ 5. ELMLNLN1504KZ 6.4 1800mm Narrow Reflector MLNLN2254KZ 8.5 ELMLNLN2254KZ 9.4 1200mm Rack Reflector MLNLR1504KZ 5.9 ELMLNLR1504KZ 6.6 1800mm Rack Reflector MLNLR2254KZ 8.6 ELMLNLR2254KZ 9.5 Luminaire with switching low level sensor (up to 3m mounting height) 1200mm Wide Area Reflector CLNLA1504KZ 5. ELCLNLA1504KZ 6.4 1800mm Wide Area Reflector CLNLA2254KZ 8.5 ELCLNLA2254KZ 9.4 1200mm Narrow Reflector CLNLN1504KZ 5. ELCLNLN1504KZ 6.4 1800mm Narrow Reflector CLNLN2254KZ 8.5 ELCLNLN2254KZ 9.4 1200mm Rack Reflector CLNLR1504KZ 5.9 ELCLNLR1504KZ 6.6 1800mm Rack Reflector CLNLR2254KZ 8.6 ELCLNLR2254KZ 9.5 For DALI dimming option, replace part number character Z with DD, e.g. LNLA1504KZ becomes LNLA1504KDD LIGHTING SOLUTIONS www.eaton.eu 353

Huddersfield Leisure Centre Huddersfield 354 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Linergy II Linergy II IP20 CONTROLS W A R R A N T Y YEAR The advances in fluorescent lighting technology saw the birth of the successful Linergy family of industrial fluorescent luminaires, helping realise significant energy savings against traditional discharge solutions in manufacturing, retail, sports hall and warehouse applications. Linergy II continues to embrace the further advances in T5 fluorescent lamp technology with the 3W lamp which provides even greater lumens per watt, aiding the global commitment to reduce the energy used by lighting in commercial buildings. In addition the range grows with an advanced rack reflector option with focused vertical illumination and enclosed versions for areas such as food preparation that require lamp shatter protection. Low energy fluorescent alternative to discharge lowbay and highbay luminaires Latest 3W T5 lamp option, with 10% less consumed energy than 80W T5 Advanced optical design for optimum energy efficiency - 82.6 lm/cw (LNA43Z) Enhanced Capital Allowance (ECA) compliance across the range Purpose designed rack reflector option for focused vertical illumination Integral occupancy detector with photocell options maximise energy saving benefits Enclosed panel option for lamp and application area protection Integral self test emergency available LIGHTING SOLUTIONS www.eaton.eu 355

Industrial Linergy II Lamp and Control Gear Options 49W (HO), 3W (HO) T5 fluorescent, 4000 K - G5 cap Energy efficient high frequency control gear as standard DALI dimming options available Materials Body - full box steel construction powder coated in RAL9016 white finish Reflectors - satin finish, zero iridescence anodised aluminium Panel - 3mm clear acrylic Wire guard - heavy duty zinc plated steel, 25mm grid size Installation Notes Suitable for ceiling, conduit, chain, rod and trunking mounting Quick fit mounting brackets fix to mounting surface (optional accessory) Supplied with reflectors and lamps pre-fitted, no need to remove during installation Enclosed IP20 clear panel option supplied complete with panel installed. Panel is secured with tool-less fixings and slides out for ease of maintenance Panel mount plug and socket for quick electrical connection Fused as standard Wire guard is a retrofit accessory secured by screws, hangs for ease of maintenance Supplied complete with lamps Dimensions 15 150 Option 492 513 L 918 898 944 L (mm) 4 x 49W/3W 1484 4 x 49W/3W with detector 1604 81 68 105 90 5 60 45 30 Photometric Data Cat. No. LNA43Z I ( cd ) C0 200 300 LOR: 0.99 ULOR: 0.03 DLOR: 0.96 SHR nom: 1.00 SHR max: 1.19 105 90 5 60 45 Options Fully integral emergency conversion, 3 hour duration Emergency versions available with automatic test functionality, reducing maintenance costs and offers ease of compliance with testing requirements Suitable for use on defined escape routes Wide area and rack reflector options provide efficient optics relevant to the task Enclosed clear acrylic panel option protects areas from lamp shatter Lighting control and energy management options including integrated occupancy and daylight detectors for up to 16m heights Top cowl for sports hall applications available to special order Specification To specify state: Surface mounted, high/low bay luminaire, of full box welded construction with post coat powder paint finish, high performance satin reflectors for wide area/rack aisle, quick fit plug and socket connector and T5 high output lamps with integrated sensor / clear panel / protective wire guard options, as Eaton s Linergy II range, part no. Cat. No. LNR43Z 300 450 600 30 I ( cd ) C0 LOR: 0.98 ULOR: 0.03 DLOR: 0.95 SHR nom: 0.5 SHR max: 0.80 105 90 5 60 45 30 105 90 5 60 45 30 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 62 3 80 85 91 95 98 102 104 30 55 66 4 9 86 91 94 99 101 10 50 61 69 4 82 8 91 96 99 50 50 20 61 1 82 88 92 94 98 100 30 54 65 2 84 88 91 95 9 10 50 61 68 3 80 85 88 93 96 30 50 20 59 69 5 9 85 88 91 94 96 30 54 64 0 5 81 85 88 92 94 10 49 60 6 2 8 83 86 90 92 0 0 0 4 5 64 68 5 9 81 85 8 BZ-class 3 3 3 3 3 2 3 3 2 See page 532 for Design Guide Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 62 1 8 82 89 93 96 100 103 30 55 64 1 6 84 89 92 9 100 10 50 59 66 2 80 85 89 94 9 50 50 20 60 69 5 9 86 90 92 96 98 30 54 63 0 4 81 86 89 93 96 10 49 58 65 0 8 82 86 91 94 30 50 20 58 6 3 82 86 89 92 94 30 53 62 68 9 81 83 86 90 92 10 49 58 64 69 6 80 83 88 90 0 0 0 4 55 61 66 2 6 9 83 85 BZ-class 3 3 3 3 3 3 3 3 3 See page 532 for Design Guide Integral sensor option 356 LIGHTING SOLUTIONS www.eaton.eu

Industrial Linergy II Catalogue Numbers Lamp Rating Optic Cat No Weight (kg) Emergency Cat No Weight (kg) Open luminaire 4 x 49W Wide Area Reflector LNA449Z 10.6 EBLNA449Z 11.2 4 x 3W Wide Area Reflector LNA43Z 10.6 EBLNA43Z 11.2 4 x 49W Rack Reflector LNR449Z 10.6 EBLNR449Z 11.2 4 x 3W Rack Reflector LNR43Z 10.6 EBLNR43Z 11.2 Enclosed luminaire (fitted with clear panel) 4 x 49W Wide Area Reflector LNAP449Z 12.9 EBLNAP449Z 14.2 4 x 3W Wide Area Reflector LNAP43Z 12.9 EBLNAP43Z 14.2 4 x 49W Rack Reflector LNRP449Z 12.9 EBLNRP449Z 14.2 4 x 3W Rack Reflector LNRP43Z 12.9 EBLNRP43Z 14.2 Open luminaire with switching High Level Detector (up to 16m heights) 4 x 49W Wide Area Reflector IHPLNA449Z 11.5 EBIHPLNA449Z 12.1 4 x 3W Wide Area Reflector IHPLNA43Z 11.5 EBIHPLNA43Z 12.1 4 x 49W Rack Reflector IHPLNR449Z 11.5 EBIHPLNR449Z 12.1 4 x 3W Rack Reflector IHPLNR43Z 11.5 EBIHPLNR43Z 12.1 Enclosed luminaire with switching High Level Detector (fitted with clear panel - up to 16m heights) 4 x 49W Wide Area Reflector IHPLNAP449Z 13.8 EBIHPLNAP449Z 15.1 4 x 3W Wide Area Reflector IHPLNAP43Z 13.8 EBIHPLNAP43Z 15.1 4 x 49W Rack Reflector IHPLNRP449Z 13.8 EBIHPLNRP449Z 15.1 4 x 3W Rack Reflector IHPLNRP43Z 13.8 EBIHPLNRP43Z 15.1 Open luminaire with switching Medium Level Detector (up to 12m heights) 4 x 49W Wide Area Reflector IMPLNA449Z 11.5 EBIMPLNA449Z 12.1 4 x 3W Wide Area Reflector IMPLNA43Z 11.5 EBIMPLNA43Z 12.1 4 x 49W Rack Reflector IMPLNR449Z 11.5 EBIMPLNR449Z 12.1 4 x 3W Rack Reflector IMPLNR43Z 11.5 EBIMPLNR43Z 12.1 Enclosed luminaire with switching Medium Level Detector (fitted with clear panel - up to 12m heights) 4 x 49W Wide Area Reflector IMPLNAP449Z 13.8 EBIMPLNAP449Z 15.1 4 x 3W Wide Area Reflector IMPLNAP43Z 13.8 EBIMPLNAP43Z 15.1 4 x 49W Rack Reflector IMPLNRP449Z 13.8 EBIMPLNRP449Z 15.1 4 x 3W Rack Reflector IMPLNRP43Z 13.8 EBIMPLNRP43Z 15.1 For DALI dimming option, replace part number character Z with DD, e.g. LNA449Z becomes LNA449DD For DALI dimming with high level dimming detector, replace part number character Z with DD, e.g. IHPLNR43Z becomes IHPLNR43DD Accessories Description Cat No Weight (kg) Wire guard LNWG 2.8 Wire guard (for use with panel versions) LNPWG 2.8 Rear mounting brackets (2) LNTMB 0.5 Wire guard fitted Wire guard fixing, hinge detail Panel secured with end bracket, secured by thumb wheels Panel slides out for ease of maintenance LIGHTING SOLUTIONS www.eaton.eu 35

Arla Foods Aylesbury 358 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial 4 Industry 4 Industry CONTROLS W A R R A N T Y YEAR As the name suggests, the 4 Industry luminaire is a high quality IP65 sealed product ideally suited to industrial and commercial applications such as warehousing, food storage or factory spaces where a high degree of ingress protection is needed. High performance is generated from the energy efficient high frequency control gear and powerful T5 lamps. Energy savings are maximised with the integrated controls options, providing either occupancy detection only or occupancy and daylight harvesting capability from the discrete end-mounted sensor. The luminaire design with a glass reinforced polymer housing and UV stable polycarbonate diffuser, which are sealed with a continuous gasket and secured with stainless steel clips, make the luminaire robust, resistant to many chemicals, easy to clean and simple to install, thus helping to reduce installation and maintenance costs. The option of internal high grade aluminium reflectors provides enhanced photometric performance in higher mounting heights or aisle installations. Energy efficient T5 lamps and high frequency control gear Integrated controls options to maximise energy savings Simple to install with suspension hangers or optional surface mount brackets Internal reflector options to suit higher mounting heights and aisle applications Self-contained 3 hour maintained integral emergency versions IP65 rated, with impact resistant PC diffuser and construction ideal for industrial applications LIGHTING SOLUTIONS www.eaton.eu 359

Industrial 4 Industry Lamp and Control Gear Options Photometric Data 54W (HO) T5 fluorescent - G5 cap High frequency control gear as standard DALI and DSI dimming versions available Materials Body - glass reinforced polymer (GRP) - grey finish Gear Tray - steel, RAL9016 white finish Reflectors - high purity anodised aluminium Diffuser - clear UV stable polycarbonate Clips - stainless steel Diffuser gasket - polyurethane 4Industry - 4 x 54W without Reflector LOR: 0.69 ULOR: 0.04 DLOR: 0.65 SHR Nom: 1:1.5 SHR Max: 1:1.81 4Industry - 4 x 54W with Reflector LOR: 0.83 ULOR: 0.01 DLOR: 0.82 SHR Nom: 1:1.25 SHR Max: 1:1.44 Installation Notes Supplied with suspension hangers for chain or wire suspension. Surface fix brackets available as an accessory (chain or suspension wire by others) Dimensions Fused as standard Terminal block with 2 x 2.5mm² cable capacity per termination 1300 1465 Supplied complete with lamps 20mm cable entry hole at each end (one used for sensor where fitted) 1300 1465 Options DALI or DSI dimmable control gear available Surface mount fixing bracket accessory PIR or PIR with photocell for occupancy and daylight savings Aluminium reflector versions for aisle or high mounting applications Fully integral emergency conversion, 3 hour duration Intellem and EasiCheck self test emergency versions available Specification To specify state: IP65 rated, robust, 4 x 54W T5 luminaire with GRP base and UV stable polycarbonate diffuser, continuous polyurethane gasket seal and stainless steel clips, suitable for suspension or surface mount installation as Eaton s 4 Industry range, part no. 35 35 Variant Weight (kg) 4 x 54W Non-Emergency 10.0 4 x 54W Non-Emergency with Reflectors 10.5 4 x 54W Emergency 11.0 4 x 54W Emergency and Reflectors 11.5 155 155 No reflector version with sensor Diffuser and geartray suspended for ease of maintenance 360 LIGHTING SOLUTIONS www.eaton.eu

Industrial 4 Industry Catalogue Numbers Emergency 1 PIR 2 Range 3 No of Lamps Lamp Wattage Optic 4 Control Gear Options EB = D = IP65 PIR/ FIN = 4Industry 4 54 R = fitted with additional Z = High frequency EC2 = EasiCheck2 3hr Photocell aluminium reflector fixed output IS = Self Test Maintained Detector per lamp. DD = DALI digital (no character = standard dimming steel geartray) RD = DSI digital dimming 1 Emergency versions are self contained conversion of one of the fluorescent lamps for operation in emergency mode 2 The D prefix sensor is IP65 rated and suitable for up to 5m mounting heights The sensor type (switching, DALI or DSI) is dictated by the control gear selected 3 All standard luminaires are IP65 rated - also refer to note 2 4 No character represents the standard white steel geartray/back reflector. The R character represents the addition of aluminium back reflector Luminaire Example Lamp Option PIR/Photocell Option Optic Cat No Description 4 x 54W T5 IP65 Sensor (DALI) Aluminium Reflector DFIN454RDD 4 Industry 4 x 54W T5 fitted with IP65 sensor, aluminium reflectors and DALI ballast Accessories Cat No Description Weight (kg) FINSBK 4 Industry Surface Mounted 0.4 Bracket Kit (Pair) Standard Suspension Bracket (Supplied) Surface Mount Bracket FINSBK (Order separately) Suspension Brackets (Supplied) Surface Brackets (Order separately) LIGHTING SOLUTIONS www.eaton.eu 361

WARRANTY Industrial Alfalux High-Bay LED Alfalux High-Bay LED W A R R A N T Y YEAR Designing emergency lighting for areas with high ceilings poses problems. Conventional bulkheads lack sufficient light output and often have inappropriate photometric distribution. Twin spot projectors are equally unlikely to provide the 0.5 Lux minimum coverage over the entire core area for open areas as required for compliance with standards. Alfalux high-bay provides a compact, simple to install solution suitable for mounting heights up to 25 metres. The Alfalux LED range is split into two variants with a mid bay solution for low to medium height mounting and a hi bay solution up to 25 metres. 60,000 hour LED options Mid bay and high bay options for optimum luminaire efficiency reducing the number of fittings required Weatherproof IP65 ingress protection suitable outdoor and wet environment Vandal resistant die-cast housing with polycarbonate lens Hinged geartray for ease of installation Self-contained, slave, self-test and addressable testing options 362 LIGHTING SOLUTIONS www.eaton.eu

Industrial Alfalux High-Bay LED Lamp Options 1 x high power white LED Materials Base - die-cast aluminium, finished in white powder coated paint Diffuser - clear polycarbonate Battery - NiCd (self-contained version) Installation Notes Suitable for ceiling mounting Designed for mounting heights of 6-25m Twin BESA entry drill-outs on rear 20mm conduit entry on each end, with blanking plugs for ease of installation Direct screw fix option, with fixing holes outside IP65 area for improved ingress protection Geartray hinged, retained in closed position by single thumb screw Terminal block, accommodating push in wiring (solid or stranded cables) Diffuser retained by allen key security screws Photometric Data Escape route 2m wide Open (anti-panic) area 1 lux min 0.5 lux min Mode Mounting Lux level height directly (m) under Mtd/NMtd 6-3.5 8.2 12.2 5.8 3..3 11.6 6.1 High Bay 8-3.9 9.4 15. 4.5 9.5 14.5.1 10-4.1 10.5 18.3.5 5 11 1.3.9 15-1.6 10.6 21.2 6.8 5.8 14.1 30 10 20 - - - - - 3.2 14.6 30 10 230V Slave 6-4.1 9.2 12.9 6.1 4.1 8.2 11.5 6.1 & CEAG High Bay 10-5.2 12.3 19. 8.8 5.6 12.3 1.8 8.6 15-5.6 15 25.4 9.8 6.9 15.5 24 10.2 20-3 15.1 2 6.5 15. 30.3 11. 25 - - - - - 3.5 1 3.5 13.5 Mtd/NMtd 2.5-4.3 9.4 9.4 1. 5.3 10.5 10.5 1. Mid Bay 2.8-3.3 9.3 9.3 1.4 5. 11.5 11.5 1.4 3.0-3.2 3.2 9.2 1.2 5.9 12.2 12.2 1.2 4.0 - - - - - 4.9 12.5 12.5 0.6 230V Slave 2.5-4.0 8.1 8.1 4.0 4.3.9.9 4.3 & CEAG Mid Bay 2.8-4.4 9.0 9.0 4.4 4. 8.6 8.6 4. 3.0-4.4 9.0 9.0 4.4 4. 8.6 8.6 4. 4.0-5.9 12.4 12.4 5.9 6.1 11.6 11.6 6.1 6.0 -.5 1.3 1.3.5 8.2 16.6 16.6 8.2 Self Contained 4.0-3.4 9.4 8.0 2.8 2.8 6.3 9.2 2.6 8W T5 6.0-3.2 9.8 8.0 2.8 2.6 11.9 10.6 2.1 NMtd 8.0-1.4 8.6.9 1.4 2.1 12.1 10.6 2.0 10.0 - - - - - 2.0 12.9 10.6 1.6 Self Contained 4.0-2.9 8.6.2 1.6 2.2 8.8 8.1 2.1 8W T5 Mtd 6.0-2.2 9.2.6 2.2 2.1 10.6 8. 2.1 8.0-1.0..6 1.0 1.9 11.2 9.3 1.8 10.0 - - - - - 0. 11.6 9.8 0.4 Dimensions Options Self-contained - Can be operated in maintained or non-maintained mode Intellem self-test CGLine+ addressable test versions (see page 23) EasiCheck addressable test versions Central battery slave versions CEAG slave versions Specification To specify state: Self-contained - High output high performance IP65 rated self-contained luminaire complete with NiCd battery, control gear and purpose designed optic/reflector suitable for mounting heights of up to 25 metres. Cast aluminium base and heavy duty clear diffuser as Eaton s Alfalux High-Bay LED part number Slave - High output high performance IP65 rated slave luminaire complete with high output control gear and purpose designed optic/reflector suitable for mounting heights of up to 25 metres. Cast aluminium base and heavy duty clear diffuser as Eaton s Alfalux High-Bay LED part number Catalogue Numbers L (mm) W (mm) D (mm) 400 136 95 System Mode Cat No Weight (kg) LED Maintained 3Hr (Hi Bay) HLLEDH3H 2. LED Maintained 3Hr Intellem HLLEDH3HIS 2. self-test (Hi Bay) LED Maintained 3Hr EasiCheck 2 HLLEDH3HEC2 2. (Hi Bay) LED 230V AC Mains slave (Hi Bay) HLLEDH230 2. LED 230V Mains slave EasiCheck HLLEDH230EC 2. (Hi Bay) LED 230V CEAG slave (Hi Bay) HLLEDH230CG 2. LED Maintained 3Hr (Mid Bay) HLLEDL3H 2. LED Maintained 3Hr Intellem HLLEDL3HIS 2. self-test (Mid Bay) LED Maintained 3Hr EasiCheck 2 HLLEDL3HEC2 2. (Mid Bay) LED 230V AC Mains slave (Mid HLLEDL230 2.5 Bay) LED 230V Mains slave EasiCheck HLLEDL230EC 2.5 (Mid Bay) LED 230V CEAG slave (Mid Bay) HLLEDL230CG 2.5 LIGHTING SOLUTIONS www.eaton.eu 363

364 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Pacemaker 2 Pacemaker 2 W A R R A N T Y YEAR Pacemaker 2 is a latest generation high bay luminaire. It has a self cleaning aluminium reflector, which has been designed for use with elliptical lamps for uniform distribution and glare control. Now also available are 2 sizes of high efficiency refractor where a direct/indirect lighting effect is required. The major size is suited to the discharge lamp versions and the minor size more in keeping with the lower mounting heights associated with the low energy CFL models. The die cast housing has a multi finned heat sink construction to dissipate lampholder heat and improve lamp life and is rated to IP65 (IP40 CFL). A toughened safety glass attachment is required if using standard metal halide lamps and this also seals the aluminium reflector to IP65. Attractive die cast aluminium housing with chain suspension facility which speeds installation Full range of SON and CFL options Housing pre-wired and IP65 as standard (IP40 CFL types) Reflector IP23 with an IP65 safety glass option to protect against dust and moisture Major and minor prismatic refractor with a conical lens option suit areas where a more decorative feel or indirect light is also required Supplied less lamp LIGHTING SOLUTIONS www.eaton.eu 365

Industrial Pacemaker 2 Lamp Options 150W, 250W, 400W SON-E - 2000 K E40 cap 42W, TC-T Compact fluorescent - 4000 K - GX24-q4 cap 5W, TE Compact fluorescent - 4000 K - GX24 - q5 cap Options All discharge lamp versions can be supplied with an auxiliary run up lamp facility (250W halogen included) which strikes immediately and disconnects when 80% of the discharge lamp light output is reached - see ARU suffix versions Fully integral emergency conversion available on CFL models Materials Housing - extruded aluminium body with die-cast aluminium end caps Reflector - spun and polished aluminium Refractor and lens - clear prismatic, UV stabilised acrylic Installation Notes Suitable for chain mount suspension Supplied with a 1m pre-wired lead Pacemaker 2 is quick to install and easy to maintain 3 way, 2 x 2.5mm 2 terminal block Reflector attached to housing with large threaded fixing nut Refractor attached to housing via 2 bayonet slots Conical lens for prismatic refractor attached with jointing band Supplied less lamp Dimensions Specification To specify state : Single point suspended high bay luminaire with extruded aluminium housing. Self cleaning spun aluminium reflector / prismatic refractor optic with optional conical lens attachment. Discharge and CFL lamp options with 3 hour maintained emergency on CFL types, as Eaton s Pacemaker 2 range, part no Photometric Data Cat. No. PM250MH & PMALR LOR: 0.52 ULOR: 0.00 DLOR: 0.52 SHR nom: 2.0 SHR max: 2.05 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 N/A 5 62 66 1 4 6 9 80 0 30 20 N/A 53 58 62 6 1 3 6 8 0 10 20 N/A 49 54 58 64 68 1 4 50 50 20 N/A 56 60 64 69 2 4 6 50 30 20 N/A 52 56 60 66 69 1 4 6 50 10 20 N/A 49 53 5 63 6 69 2 4 30 50 20 N/A 55 59 62 6 69 1 3 5 30 30 20 N/A 51 55 59 64 6 69 2 3 30 10 10 N/A 48 53 5 62 65 6 0 2 0 0 0 N/A 46 51 54 60 63 65 6 69 BZ-class 1 2 2 2 2 2 2 2 2 See page 532 for Design Guide H Dia Option Dia (mm) H (mm) With PMALR reflector 485 662 With PMREF40 refractor and collar 40 65 With PMREF563 refractor and collar 563 35 Cat. No. PM442Z & PMREF40 LOR: 0.81 ULOR: 0.22 DLOR: 0.59 SHR nom: 1.5 SHR max: 1.51 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 44 50 55 58 63 66 69 2 4 0 30 20 39 45 49 53 58 62 65 68 1 0 10 20 35 40 45 49 54 58 61 65 68 50 50 20 41 46 50 53 5 60 62 65 6 50 30 20 3 42 46 49 53 56 59 62 64 50 10 20 33 38 42 45 50 53 56 59 62 30 50 20 38 42 46 48 52 54 56 58 60 30 30 20 34 39 42 45 49 51 53 56 58 30 10 20 31 36 39 42 46 49 51 54 56 0 0 0 28 31 34 3 40 42 44 46 48 BZ-class 3 4 4 5 5 5 5 5 5 See page 532 for Design Guide 366 LIGHTING SOLUTIONS www.eaton.eu

Industrial Pacemaker 2 Catalogue Numbers Lamp Rating Lamp Type Cat No Weight (kg) Cat No Weight (kg) Discharge Lamp Housings 150W HP Sodium PM150S 5. PM150S-ARU 5. 250W HP Sodium PM250S 6. PM250S-ARU 6. 400W HP Sodium PM400S 8.1 PM400S-ARU 8.1 Lamp Rating Lamp Type Cat No Weight (kg) Emergency Cat No Weight (kg) Compact Fluorescent Lamp Housings 1 x 5W High Frequency CFL PM15Z 3.1 EBPM15Z 3.9 2 x 5W High Frequency CFL PM25Z 3.2 EBPM25Z 4.0 2 x 42W High Frequency CFL PM242Z 3.2 EBPM242Z 4.0 4 x 42W High Frequency CFL PM442Z 3.6 EBPM442Z 4.4 1 x 5W Digital Dimming CFL PM15RD 3.1 EBPM15RD 3.9 2 x 5W Digital Dimming CFL PM25RD 3.2 EBPM25RD 4.0 2 x 42W Digital Dimming CFL PM242RD 3.2 EBPM242RD 4.0 4 x 42W Digital Dimming CFL PM442RD 3.6 EBPM442RD 4.4 Lamp Type Lamp Rating Description Cat No Weight (kg) Accessories Discharge Any Pacemaker 2 Aluminium Reflector PMALR 1.0 Discharge Any Pacemaker 2 IP65 Safety Glass PMSG 2.2 Discharge Any Pacemaker 2 Wire Guard PMWG 0.3 Discharge Any Pacemaker 563 dia Prismatic Refractor and Collar PMREF563 3.3 Discharge Any Pacemaker 563 dia Prismatic Conical Lens and Band PMLENS563 1.1 CFL Any Pacemaker 40 dia Prismatic Refractor and Collar PMREF40 1.8 CFL Any Pacemaker 40 dia Prismatic Conical Lens and Band PMLENS40 0. LIGHTING SOLUTIONS www.eaton.eu 36

Easton College Norfolk 368 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Lowbay Lowbay W A R R A N T Y YEAR Easy to install and delivering outstanding optical performance, Lowbay sets new standards in low bay luminaire design. Suitable for a wide variety of industrial and commercial applications, the luminaire has a hinged and detachable geartray to simplify installation, with the body installed first before hooking on the heavier geartray. Attachments are easily added, sliding into guide rails on the body and secured by a captive, rotating end plate. The Lowbay range offers a practical choice to suit your application. High performance reflector design - 80% - 83% LOR Detachable hinged geartray for easy installation Comprehensive choice of lamps Easy to install slide in attachments Supplied with lamp LIGHTING SOLUTIONS www.eaton.eu 369

Industrial Lowbay Lamp Options 150W, 250W, 400W SON T E40 cap Materials Body - heavy gauge steel, powder coated in RAL9016 white finish Reflector - anodised aluminium, hammered finish Wire guard - zinc plated steel Glass - toughened glass sheet Bowl - clear UV stabilised polycarbonate Transverse louvre - mild steel powder coated in RAL9016 white finish Installation Notes Suitable for ceiling, conduit, chain and trunking mounting 2 x BESA fixings on 468mm centres Body mounted with geartray and reflector detached, minimising weight Geartray hooks onto body and hinges through 90 for easy wiring. Locked into position by captive screw 3 way, 2 x 2.5mm 2 terminal block Reflector rolls/slides into position Attachments slide into retaining guide rail and fixed by locking end plate Supplied complete with lamps Options Up to 2 attachments can be installed together. Contact us for full details Glass panel is compulsory and supplied as standard when metal halide lamp option catalogue numbers are ordered Thermal cut-out on ballast as standard (SON/MBI-T versions only) Specification To specify state: Surface mounted low bay luminaire with detachable, hinged geartray for ease of installation, slide in attachments with locking end plate retention, high performance aluminium hammer finished reflector, as Eaton s Lowbay range, part no. Photometric Data Cat. No. LBY250M SHR nom: 1.25 SHR max: 1.43 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 55 63 68 1 6 9 81 84 85 0 30 20 50 58 63 6 2 6 8 81 83 0 10 20 46 54 60 64 69 3 5 9 81 50 50 20 54 61 66 69 4 6 8 81 82 50 30 20 49 5 62 66 0 4 6 9 80 50 10 20 46 54 59 63 68 1 4 9 30 50 20 53 60 64 6 1 4 6 8 9 30 30 20 49 56 61 64 69 2 4 6 8 30 10 20 46 53 58 62 6 0 2 5 6 0 0 0 44 52 56 60 64 6 69 1 3 BZ-class 2 2 2 2 2 2 2 2 2 See page 532 for design guide Dimensions 468 31 228 Gear tray end 21mm dia cable entry hole Embossed feet C/W 5.5mm dia woodscrew holes Chain Hole 5.5mm dia slot 18mm long L (mm) W (mm) D (mm) BESA fixing centres (mm) 600 318 184 468 Polycarbonate bowl adds 80mm to depth Transverse louvre adds 50mm to depth 30 LIGHTING SOLUTIONS www.eaton.eu

Industrial Lowbay Catalogue Numbers Lamp Rating Lamp Type Cat No Weight (kg) High pressure sodium lamps 1 x 150W SON-T (2000 K) LB150ST 10.8 1 x 250W SON-T (2000 K) LB250ST 12.0 1 x 400W SON-T (2000 K) LB400ST 13.2 Attachments Cat No Weight (kg) Transverse louvre LMXLL 2.2 Glass panel (416mm x 311mm x 4mm thick) LMXLTP 1.5 LIGHTING SOLUTIONS www.eaton.eu 31

WARRANTY Industrial Tufflite Plus LED Tufflite Plus LED W A R R A N T Y YEAR IP66 Tufflite Plus LED brings an added performance and energy efficiency to the versatile range of IP66 rated weatherproof luminaires. A combined construction of a polycarbonate diffuser and polyester GRP body give a high degree of impact resistance to IK08. LED linear light engines provide a class leading and fully flexible range of options for the designer in applications such as warehouses, plant rooms, covered car parks and general lighting where ingress protection and a robust luminaire are a necessity. IP66, dust tight and water jet proof for stay clean operation Vandal and heat resistant polycarbonate diffuser and polyester GRP body (RAL035) Deep poured polyurethane gasket to maintain IP66 rating Class leading LED performance and efficacy Complete with surface/suspended fast fix stainless steel mounting clips helps avoid the need for drilling the housing during installation IK08 impact resistance 32 LIGHTING SOLUTIONS www.eaton.eu

Industrial Tufflite Plus LED Light Engine and Control Gear Energy efficient high frequency control gear as standard High efficacy LED linear light engines (4000 K) Materials Body - polyester GRP in RAL035 with two integrated gear tray holders to allow hands free connection during installation. Deep filled poured polyurethane gasket for IP66 rating Diffuser - UV stabilised fire retardant polycarbonate with unique end obscured detail for glare limiting operation. Full secondary diffuser for maximum light distribution and control Clips - polyamide material for strength and positive fixing Installation Notes Ceiling fixing brackets supplied, removing the need to seal fixing holes 20mm cable entry hole at each end, supplied complete with sealing plugs 3/4 way screw terminal block Through wiring kit available (TF6TWKIT1200) Geartray hangs on body for ease of install, locates in position with tool free clips Simple to use diffuser clips This luminaire is IP66 rated, this rating only applies when the luminaire is mounted observing the correct orientation and must not be positioned in direct sunlight. In exterior applications it is recommended the luminaires are protected under a canopy or cover, the housing is not suitable for mounting with the base directly on a vertical surface in the horizontal orientation. Please refer to the installation leaflet for further details. Options DALI dimming option Fully integrated independent emergency, 3 hour operation Suitable for use on defined escape routes We offer a range of product support contracts to aid commissioning, reduce your maintenance costs, comply with legislative test requirements and increase the lifespan of your lighting equipment. Dimensions W L Cat No W (mm) D (mm) L (mm) TFP904KZ 145 101 12 TFP804KZ 145 101 12 TFP04KZ 145 101 12 TFP504KZ 101 101 12 TFP404KZ 101 101 12 TFP304KZ 101 101 12 Specification To specify state: Moisture resistant luminaire, sealed to IP66 with polyester GRP body and polycarbonate prismatic light controller and secondary diffuser, secured by hinged latches and removable geartray retained by tool free clips, as Eaton s Tufflite Plus LED range, part no. Photometric Data Cat. No. TFP304KZ Chemical Agent Acetic acid 10% Acetone Alcoholic beverages Aluminium sulphate Ammonia 5% Aniline Arsenic acid 20% Body (Polyester) Diffuser (Polycarbonate) Benzene Bencylic alcohol Bromine Calcium chloride Calcium nitrate Carbon tetrachloride Carbonic acid Caustic potash 5% Cement Hydrochloric acid 1-5% Chlorine liquids (vapours) Chloroform Chromic acid Citric acid 20% Copper sulphate Diesel-naphta oil Ethyl alcohol 30% Ethyl chloride Ethyl ether Food oils and fats Formic acid 10% Glycerine Luminaire Output = 302m lumens SHR nom: 1.25 SHR max: 1.48 Chemical Resistance Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 52 61 68 3 80 85 88 93 96 0 30 20 44 53 60 65 3 9 83 88 92 0 10 20 38 4 54 59 68 3 8 84 88 50 50 20 49 58 64 69 5 80 83 8 90 50 30 20 42 51 5 62 69 4 8 83 8 50 10 20 3 46 52 5 65 0 4 80 83 30 50 20 4 55 60 65 1 5 8 82 84 30 30 20 40 49 55 59 66 1 4 8 81 30 10 20 36 44 50 55 62 6 0 6 9 0 0 0 33 40 46 50 5 61 64 69 2 BZ-class 6 5 5 5 5 5 5 5 5 See page 532 for design guide Chemical Agent Hexane Iodine Iron chloride Isopropylic alcohol Lubricating oil Magnesium sulphate Methanol Mineral oils Nitric acid 20% Oxygen Ozone Perchloric acid 10% Petrol Phenol Pothassium bromide Pothassium nitrate Pothassium permanganate Sea climate Silicon oils Soda bleach 15% Sodium chloride Sodium hydroxide 5% Sodium sulphate Sugar Body (Polyester) Diffuser (Polycarbonate) Sulphur Sulphuric acid 30% Toluene Trichloroethylene Zinc sulphate Resistant Relatively Resistant Non-Resistant D Catalogue Numbers Cat No Lumen Output (lm) Wattage Efficacy (Llm/cW) Weight (kg) Emergency Cat No Weight (kg) TFP904KZ 9055 102.3 88.45 4.35 ELTFP904KZ 4.8 TFP804KZ 8059 88.1 91.41 4.35 ELTFP804KZ 4.8 TFP04KZ 128 6.1 93.6 4.35 ELTFP04KZ 4.8 TFP504KZ 5139 58.5 8.81 2.85 ELTFP504KZ 3.3 TFP404KZ 4034 43.6 92.42 2.85 ELTFP404KZ 3.3 TFP304KZ 3023 29.4 102.62 2.85 ELTFP304KZ 3.3 For DALI dimming option, replace part number character Z with DD, e.g. TFP504KZ becomes TFP504KDD LIGHTING SOLUTIONS www.eaton.eu 33

WARRANTY Industrial Tufflite LED Tufflite LED CONTROLS IP66 W A R R A N T Y YEAR Tufflite LED is a versatile general purpose, IP66 rated, luminaire. It is supplied with fast fit mounting clips for ease of installation, avoiding the need to drill the housing. Options include; 3 hour combined non-maintained emergency functionality, dimmable control gear and integrated lighting controls options to maximise energy savings, user comfort and control. Linear LED light engines and efficient control gear provide class leading performance; they are protected by a GRP (glass reinforced polymer) base and polycarbonate diffuser with a high impact resistance rating of IK08. With a comprehensive range of lumen outputs across 3 luminaire lengths, Tufflite LED delivers choice and flexibility to suit a wide range of applications such as warehousing, plant rooms, carparks, loading/storage spaces and assembly areas where high ingress protection and robust construction are required. Nominal 4, 5 and 6 formats, in narrow and wide housings, ideal for both new and retro fit applications Impact and heat resistant opal polycarbonate diffuser and GRP base housing construction, IK08 rated, and secured with anti-tamper diffuser clips Deep poured continuous polyurethane gasket to maintain IP66 rating Class leading LED luminaire performance and efficacy with lumen packages to match and exceed traditional fluorescent technology with reduced energy consumption Integrated lighting control options to maximise energy saving, user comfort and control Integral 3 hour combined non-maintained functionality option Fast fix stainless steel mounting clips for rapid installation. (No need to drill the housing avoiding a potential ingress path) 34 LIGHTING SOLUTIONS www.eaton.eu

Industrial Tufflite LED Light Engine and Control Gear High efficacy linear LED light engines >80CRI, 4000 K Energy efficient high frequency control gear as standard DALI dimmable control gear option Materials Body polyester GRP in RAL035 grey with integrated gear tray supports and deep poured polyurethane gasket Diffuser UV stabilised fire retardant polycarbonate Diffuser clips polyamide - offering strength and integral locking screw function Gear tray sheet steel, white finish Mounting brackets stainless steel (grade 501) Corridor Function control available to special order with the CO suffix Fully integral combined non-maintained emergency, 3 hour duration. Suitable for use on defined escape routes. We offer a range of product support contracts to aid commissioning, reduce your maintenance costs, comply with legislative test requirements and maximise the lifespan of your lighting equipment. Specification To specify state: General purpose IP66 rated luminaire with GRP base and reeded opal polycarbonate light controller, secured by tamper resistant hinged latches and removable geartray retained by tool free clips, as Eaton s Tufflite LED range, part no. Photometric Data Installation Notes Surface/suspension mount rear brackets supplied, removing the need to drill the housing base 20mm cable entry holes at each end, supplied complete with sealing plugs Terminal block with 2 x 2.5mm² cable capacity per termination Through wiring kits available Geartray hangs on the body for ease of install, locates in final position with tool free clips Simple to use diffuser clips, 4 of which have security screws to lock them in the closed position as an anti-tamper feature and ensures access only through tooled entry to the luminaire. This luminaire is IP66 rated, this rating only applies when the luminaire is installed observing the correct orientation and must not be positioned in direct sunlight. In exterior applications it is recommended the luminaires are protected under a canopy or cover, the housing is not suitable for mounting with the base directly on a vertical surface in the horizontal orientation. Please refer to the installation leaflet for further details. Options DALI dimming option Intelligent light and energy management options: - End mounted IP65 rated sensor with switching or dimming function, with/without photocell Dimensions W Catalogue Numbers L D Cat No W (mm) D (mm) L (mm) TXL4N254KZ 101 101 1282 TXL4N344KZ 101 101 1282 TXL4N44KZ 101 101 1282 TXL4W644KZ 145 101 1282 TXL5N24KZ 101 101 158 TXL5N364KZ 101 101 158 TXL5N514KZ 101 101 158 TXL5W554KZ 145 101 158 TXL5W54KZ 145 101 158 TXL5W904KZ 145 101 158 TXL6N534KZ 101 101 1840 TXL6W954KZ 145 101 1840 TXL6W1124KZ 145 101 1840 Cat. No. TXL4N44KZ Chemical Agent Acetic acid 10% Acetone Alcoholic beverages Aluminium sulphate Ammonia 5% Aniline Arsenic acid 20% Body (Polyester) Diffuser (Polycarbonate) Benzene Bencylic alcohol Bromine Calcium chloride Calcium nitrate Carbon tetrachloride Carbonic acid Caustic potash 5% Cement Hydrochloric acid 1-5% Chlorine liquids (vapours) Chloroform Chromic acid Citric acid 20% Copper sulphate Diesel-naphta oil Ethyl alcohol 30% Ethyl chloride Ethyl ether Food oils and fats Formic acid 10% Glycerine Luminaire Output = 438 lumens SHR nom: 1.50 SHR max: 1.66 Chemical Resistance For DALI dimming option, replace part number character Z with DD, e.g. TFP504KZ becomes TFP504KDD Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 54 62 69 4 81 86 90 94 98 0 30 20 46 54 62 6 5 80 84 90 93 0 10 20 41 48 56 61 69 5 9 85 90 50 50 20 52 59 66 0 81 84 89 92 50 30 20 45 52 59 64 1 6 80 85 88 50 10 20 40 4 54 59 66 2 6 81 85 30 50 20 49 56 62 6 3 80 83 86 30 30 20 43 50 5 61 68 2 6 80 83 30 10 20 39 46 52 5 64 69 2 81 0 0 0 36 42 48 53 59 63 6 1 4 BZ-class 5 5 5 5 5 5 5 5 5 See page 532 for design guide Chemical Agent Hexane Iodine Iron chloride Isopropylic alcohol Lubricating oil Magnesium sulphate Methanol Mineral oils Nitric acid 20% Oxygen Ozone Perchloric acid 10% Petrol Phenol Pothassium bromide Pothassium nitrate Pothassium permanganate Sea climate Silicon oils Soda bleach 15% Sodium chloride Sodium hydroxide 5% Sodium sulphate Sugar Body (Polyester) Diffuser (Polycarbonate) Sulphur Sulphuric acid 30% Toluene Trichloroethylene Zinc sulphate Resistant Relatively Resistant Non-Resistant Weight (kg) Type L(mm) W(mm) D(mm) Fixing Centres (mm) HF HF Em DALI DALI Em 4 single 1282 101 101 800 3.05 3.40 3.15 3.50 4 twin 1282 145 101 800 4.2 4.62 4.35 4.0 5 single 158 101 101 1100 3.5 4.10 3.95 4.30 5 twin 158 145 101 1100 5.35 5.0 5.30 5.60 6 single 1840 101 101 1540 4.85 5.20 5.10 5.40 6 twin 1840 145 101 515/1545 6.45 6.80 6.0.10 LIGHTING SOLUTIONS www.eaton.eu 35

Industrial Tufflite LED Catalogue Numbers Emergency 1 EL = 3hr Combined Non-maintained Range TXL = Tufflite LED Housing Length 4 4 = 4 (1285mm) 5 = 5 (158mm) 6 = 6 (1840mm) Housing width 4 N = narrow (101mm) W = wide (145mm) Colour Temperature 4K = 4000 o K Control Gear Z = High Frequency Fixed Output DD = DALI Dimming Controls 2,3 P = IP65 PIR only end mounted D = IP65 PIR with Photocell end mounted 5 Lumen Output 25 = 2500 55 = 5500 2 = 200 64 = 6400 34 = 3400 65 = 6500 36 = 3600 5 = 500 38 = 3800 8 = 800 46 = 4600 90 = 9000 48 = 4800 95 = 9500 51 = 5100 112 = 11200 53 = 5300 Option 6 CO = Corridor Function 1 Emergency versions use a dedicated LED which operates only when in emergency mode 2 The P prefix sensor is a switching PIR only for use on fixed output control gear (unless inconjunction with DD and CO for Corridor Function) The D prefix sensor is a switching PIR with photocell, the control gear option dictates the sensor type i.e: Switching with a threshold sensor for HF gear, DALI digital dimming gear uses a regulating photocell version 3 P and D prefix sensors are mounted in the end of the luminaire, they are IP20 rated and suitable for up to 5m mounting heights - note. The type P and D sensors are only suitable for temperature ranges of 0 o C to 25 o C 4 Please refer to the dimension table and diagram for exact dimensions 5 The lumen output values are not all available in all lengths, please refer to HF catalogue listing 6 Corridor Function is a Tridonic specific option available with their dimmable control gear, this CO suffix must be added to ensure the correct driver is used. Add the CO after the DD suffix. Luminaire Example Cat No ELDTXL5W54KDD Description Tufflite LED 5 4000K, DALI, with integral combined non-maintained emergency functionality and fitted with end mounted IP65 PIR/photocell DALI sensor Twin width housing Narrow width housing Single lamp rear quick fit bracket and tamper proof clip Twin lamp rear quick fit bracket and tamper proof clip 36 LIGHTING SOLUTIONS www.eaton.eu

Industrial Tufflite LED Catalogue Numbers Cat No Description Lumen Output (lm) Circuit Watts (W) Standard Fixed Output TXL4N254KZ Tufflite LED 2500 4000K HF 1.2m single 2540 21.4 118.8 TXL4N344KZ Tufflite LED 3400 4000K HF 1.2m single 3433 29.9 115.0 TXL4N44KZ Tufflite LED 400 4000K HF 1.2m single 40 42.0 112.0 Efficacy (Llm/cW) TXL4W644KZ Tufflite LED 6400 4000K HF 1.2m twin 6400 5.5 111.5 TXL5N24KZ Tufflite LED 200 4000K HF 1.5m single 292 22.6 123.6 TXL5N364KZ Tufflite LED 3600 4000K HF 1.5m single 3618 29.8 121.4 TXL5N514KZ Tufflite LED 4800 5100K HF 1.5m single 5154 45.0 114. TXL5W554KZ Tufflite LED 5500 4000K HF 1.5m twin 5514 44.6 123.6 TXL5W54KZ Tufflite LED 500 4000K HF 1.5m twin 518 63.3 118.8 TXL5W904KZ Tufflite LED 9000 4000K HF 1.5m twin 9033 9.2 114.1 TXL6N534KZ Tufflite LED 5300 4000K HF 1.8m single 5304 42.9 123.5 TXL6W954KZ Tufflite LED 9500 4000K HF 1.8m twin 951 82.9 115.4 TXL6W1124KZ Tufflite LED 11200 4000K HF 1.8m twin 11200 100. 111.2 For emergency versions please add the EL prefix, e.g. TXL5N554KZ becomes ELTXL5N554KZ For emergency versions the circuit watts will increase by 1.5W to account for the charging circuit For DALI dimmable options please replace the Z suffix with DD e.g. TXL5N554KZ becomes TXL5N554KDD Refer to the catalogue number matrix for other options For further information contact our technical support and application department on 01302 303240 or email LightingTechnicalUK@Eaton.com Batten fit sensors (IP20 rated), 0 C - 25 C ambient LIGHTING SOLUTIONS www.eaton.eu 3

British Ceramic Tiles Devon 38 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Tufflite TFW IP66 Tufflite TFW IP66 IP66 CONTROLS W A R R A N T Y YEAR The Tufflite TFW range is a versatile general purpose IP66 rated weatherproof luminaire. It is supplied with fast fit mounting clips as standard for ease of installation and available with a choice of switch start and high frequency control gear, T5 and T8 lamp options and integral emergency variants. Stainless steel diffuser clips and through wiring kits are also available as separate accessories. The polycarbonate diffuser provides excellent impact resistance and married with the GRP (glass reinforced polymer) base and contemporary aesthetics, the TFW range provides a strong, fully enclosed luminaire designed for use in wet or dusty areas such as shower areas, plant rooms, under canopies, car parks, loading bays and sign lighting. IP66, dust tight and water jet proof for stay clean operation Vandal and heat resistant GRP (glass reinforced polymer) body, polycarbonate diffuser and polyamide clips Deep poured gasket seal for consistent and reliable sealing Prismatic diffuser for optimum light distribution and glare reduction Fast fit mounting clips avoid the need for drilling the housing on installation Microwave sensor option for greater lighting control IP65 rated PIR and photocell sensor options to maximise control and energy saving LIGHTING SOLUTIONS www.eaton.eu 39

Industrial Tufflite TFW IP66 Lamp and Control Gear Options 18W, 36W, 58W and 0W T8 fluorescent 4000 K - G13 cap 28W, 35W (HE), 49W, 54W (HO) T5 fluorescent 4000 K - G5 cap High frequency and switch start control gear as standard HF regulating versions on request (including DSI and DALI) Materials Body - glass reinforced polyester (GRP) Gasket - polyurethane Diffuser - UV stabilised, fire retardant prismatic polycarbonate Clips - fire retardant polyamide (501 stainless steel accessory kits available) Geartray - sheet steel, white finish Installation Notes Ceiling fixing brackets supplied, removing the need to seal fixing holes 20mm cable entry holes at each end, supplied complete with sealing plugs 3/4 screw terminal block Through wiring kits available Geartray hangs on body for ease of install, locates in position with tool free clips Simple to use diffuser clips Supplied excluding lamps This luminaire is IP66 rated, this rating only applies when the luminaire is mounted observing the correct orientation and must not be positioned in direct sunlight. In exterior applications it is recommended the luminaires are protected under a canopy or cover, the housing is not suitable for mounting with the base directly on a vertical surface in the horizontal orientation. Please refer to the installation leaflet for further details Dimensions W L Lamp L (mm) W (mm) D (mm) Fixing Centres 1 x 18W 665 101 101 390 1 x 28/54/36W 1282 101 101 800 1 x 35/49/58W 158 101 101 1100 1 x 0W 1839 101 101 1540 2 x 18W 665 145 101 390 2 x 28/54/36W 1282 145 101 800 2 x 35/49/58W 158 145 101 1100 2 x 0W 1858 145 101 515 / 1545 D Options Stainless steel diffuser clips, available separately T5 and T8 single and twin lamp versions available Through wiring kits available for all lengths Fully integral emergency conversion, 3 hour duration Intellem self-test emergency versions available Suitable for use on defined escape routes Microwave sensor option (page 510) ( IM prefix) PIR and photocell option available ( D prefix) DALI option available ( DD sufffix) Specification To specify state: Weatherproof luminaire, sealed to IP66, with GRP body and polycarbonate prismatic light controller, secured by hinged latches and removable geartray retained by tool free clips, as Eaton s Tufflite TFW range, part no. Photometric Data Cat. No. TFW6236Z LOR: 0.2 ULOR: 0.13 DLOR: 0.59 SHR nom: 1.5 SHR max: 1.66 Chemical Agent Chemical Resistance Body (Polyester) Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 35 41 46 49 54 58 61 64 66 0 30 20 29 35 40 44 49 53 56 60 63 0 10 20 25 30 36 40 45 49 53 5 60 50 50 20 33 38 42 46 50 54 56 59 61 50 30 20 28 33 38 41 46 50 52 56 59 50 10 20 24 29 34 3 43 46 49 53 56 30 50 20 31 35 39 42 4 49 52 54 56 30 30 20 2 31 35 39 43 46 49 52 54 30 10 20 23 28 32 35 40 44 46 50 52 0 0 0 21 25 29 31 36 39 41 44 46 BZ-class 6 6 6 6 6 6 6 6 6 See page 532 for design guide Diffuser (Polycarbonate) Chemical Agent Body (Polyester) Diffuser (Polycarbonate) Acetic acid 10% Acetone Hexane Iodine Alcoholic beverages Aluminium sulphate Ammonia 5% Iron chloride Isopropylic alcohol Lubricating oil Aniline Magnesium sulphate Arsenic acid 20% Methanol Benzene Mineral oils Bencylic alcohol Nitric acid 20% Bromine Oxygen Calcium chloride Calcium nitrate Ozone Perchloric acid 10% Carbon tetrachloride Petrol Carbonic acid Phenol Caustic potash 5% Pothassium bromide Cement Hydrochloric acid 1-5% Chlorine liquids (vapours) Pothassium nitrate Pothassium permanganate Sea climate Chloroform Silicon oils Chromic acid Soda bleach 15% Citric acid 20% Copper sulphate Diesel-naphta oil Ethyl alcohol 30% Ethyl chloride Sodium chloride Sodium hydroxide 5% Sodium sulphate Sugar Sulphur Ethyl ether Sulphuric acid 30% Food oils and fats Toluene Formic acid 10% Glycerine Trichloroethylene Zinc sulphate Resistant Relatively Resistant Non-Resistant 380 LIGHTING SOLUTIONS www.eaton.eu

Industrial Tufflite TFW IP66 Catalogue Numbers Lamp Rating Gear Option Cat No Weight (kg) Emergency Cat No TFW - GRP body and polycarbonate diffuser, for T5 lamps (not supplied) 1 x 28W High Frequency TFW6128Z 2. EBTFW6128Z 4.1 2 x 28W High Frequency TFW6228Z 4.5 EBTFW6228Z 5.9 1 x 35W High Frequency TFW6135Z 3.6 EBTFW6135Z 5.0 2 x 35W High Frequency TFW6235Z 6.2 EBTFW6235Z.6 1 x 49W High Frequency TFW6149Z 3.6 EBTFW6149Z 5.0 2 x 49W High Frequency TFW6249Z 6.2 EBTFW6249Z.6 1 x 54W High Frequency TFW6154Z 2. EBTFW6154Z 4.1 2 x 54W High Frequency TFW6254Z 4.5 EBTFW6254Z 5.9 Weight (kg) 1 x 28W DSI Digital Dim TFW6128RD 3.3 EBTFW6128RD 4. 2 x 28W DSI Digital Dim TFW6228RD 5.1 EBTFW6228RD 6.5 1 x 35W DSI Digital Dim TFW6135RD 4.2 EBTFW6135RD 5.6 2 x 35W DSI Digital Dim TFW6235RD 6.8 EBTFW6235RD 8.2 1 x 49W DSI Digital Dim TFW6149RD 4.2 EBTFW6149RD 5.6 2 x 49W DSI Digital Dim TFW6249RD 6.8 EBTFW6249RD 8.2 1 x 54W DSI Digital Dim TFW6154RD 3.3 EBTFW6154RD 4. 2 x 54W DSI Digital Dim TFW6254RD 5.1 EBTFW6254RD 6.5 TFW - GRP body and polycarbonate diffuser, for T8 lamps (not supplied) 1 x 18W High Frequency TFW6118Z 1.8 - - 2 x 18W High Frequency TFW6218Z 2.1 - - 1 x 36W High Frequency TFW6136Z 2. EBTFW6136Z 4.1 2 x 36W High Frequency TFW6236Z 4.5 EBTFW6236Z 5.9 1 x 58W High Frequency TFW6158Z 3.6 EBTFW6158Z 5.0 2 x 58W High Frequency TFW6258Z 6.2 EBTFW6258Z.6 1 x 0W High Frequency TFW610Z 4.3 EBTFW610Z 5. 2 x 0W High Frequency TFW620Z.9 EBTFW620Z 9.3 1 x 36W DSI Digital Dim TFW6136RD 3.3 EBTFW6136RD 4. 2 x 36W DSI Digital Dim TFW6236RD 5.1 EBTFW6236RD 6.5 1 x 58W DSI Digital Dim TFW6158RD 4.2 EBTFW6158RD 5.6 2 x 58W DSI Digital Dim TFW6258RD 6.8 EBTFW6258RD 8.2 1 x 18W Switch Start TFW6118S 1.9 - - 2 x 18W Switch Start TFW6218S 2.2 - - 1 x 36W Switch Start TFW6136S 2.8 EBTFW6136S 4.2 2 x 36W Switch Start TFW6236S 4.6 EBTFW6236S 6.0 1 x 58W Switch Start TFW6158S 3. EBTFW6158S 5.1 2 x 58W Switch Start TFW6258S 6.3 EBTFW6258S. 1 x 0W Switch Start TFW610S 4.4 EBTFW610S 5.8 2 x 0W Switch Start TFW620S 8.0 EBTFW620S 9.4 For microwave sensor control prefix HF part number with IM, e.g. TFW6149Z becomes IMTFW6149Z For microwave with corridor function prefix RD part number with IM eg TFW6149RD becomes IMTFW6149RD For switching PIR sensor control prefix HF part number with D, e.g. TFW6149Z becomes DTFW6149Z For PIR sensor with photocell function prefix RD part number with D, e.g. TFW6149RD becomes DTFW6149RD Accessories Cat No Weight (kg) Stainless steel clip kit, 12 x steel clips TF6SCKIT12 0.1 Plastic clip kit, 12 x plastic clips TF6PCKIT12 0.2 Rear mounting bracket (pair) TF6RMBKT2 0.5 Through wire kit for 600mm, 18W TF6TWKIT600 0.2 Through wire kit for 1200mm, 28/54/36W TF6TWKIT1200 0.4 Through wire kit for 1500mm, 35/49/58W TF6TWKIT1500 0.5 Through wire kit for 1800mm, 0W TF6TWKIT1800 0.6 LIGHTING SOLUTIONS www.eaton.eu 381

Suffolk New College Suffolk 382 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Tufflite TFC IP66 Tufflite TFC IP66 IP66 CONTROLS W A R R A N T Y YEAR The Tufflite TFC range is an IP66 rated luminaire, manufactured with a robust glass reinforced polyester base and an acrylic controller secured with stainless steel clips. This provides a polycarbonate free luminaire ideal for use in areas where corrosive chemicals may be present such as industrial plants, workshops, food factories and maintenance areas. It is supplied with fast fit mounting clips as standard for ease of installation and available with a choice of switch start and high frequency control gear, T5 and T8 lamp options and integral 3 hour maintained emergency variants. Through wiring kits are also available as separate accessories adding to the versatility of the range. IP66, dust tight and water jet proof for stay clean operation Vandal and heat resistant GRP body, acrylic diffuser and stainless steel clips Deep poured gasket seal for consistent and reliable sealing Prismatic diffuser for optimum light distribution and glare reduction Fast fit mounting clips avoid the need for drilling the housing on installation Microwave sensor option for greater lighting control IP65 rated PIR and photocell sensor options to maximise control and energy saving LIGHTING SOLUTIONS www.eaton.eu 383

Industrial Tufflite TFC IP66 Lamp and Control Gear Options 18W, 36W, 58W and 0W T8 fluorescent 4000 K - G13 cap 28W, 35W (HE), 49W, 54W (HO) T5 fluorescent 4000 K - G5 cap High frequency and switch start control gear as standard HF regulating versions on request (including DSI and DALI) Materials Body - glass reinforced polyester (GRP) Gasket - polyurethane Diffuser - UV stabilised prismatic acrylic Clips - 501 stainless steel Geartray - sheet steel, white finish Installation Notes Ceiling fixing brackets supplied, removing the need to seal fixing holes 20mm cable entry holes at each end, supplied complete with sealing plugs 3/4 screw terminal block Through wiring kits available Geartray hangs on body for ease of install, locates in position with tool free clips Simple to use diffuser clips Supplied excluding lamps This luminaire is IP66 rated, this rating only applies when the luminaire is mounted observing the correct orientation and must not be positioned in direct sunlight. In exterior applications it is recommended the luminaires are protected under a canopy or cover, the housing is not suitable for mounting with the base directly on a vertical surface in the horizontal orientation. Please refer to the installation leaflet for further details Dimensions W L Lamp L (mm) W (mm) D (mm) Fixing Centres 1 x 18W 665 101 101 390 1 x 28/54/36W 1282 101 101 800 1 x 35/49/58W 158 101 101 1100 1 x 0W 1839 101 101 1540 2 x 18W 665 145 101 390 2 x 28/54/36W 1282 145 101 800 2 x 35/49/58W 158 145 101 1100 2 x 0W 1858 145 101 515 / 1545 D Options T5 and T8 single and twin lamp versions available Through wiring kits available for all lengths Fully integral emergency conversion, 3 hour duration Intellem self-test emergency versions available Suitable for use on defined escape routes Microwave sensor option (page 510) ( IM prefix) PIR and photocell option available ( D prefix) DALI option available ( DD suffix) Specification To specify state: Weatherproof luminaire, sealed to IP66, with GRP body and acrylic prismatic light controller, secured by hinged stainless steel latches and removable geartray retained by tool free clips, as Eaton s Tufflite TFC range, part no. Photometric Data Cat. No. TFC6235 LOR: 0.86 ULOR: 0.15 DLOR: 0.1 SHR nom: 1.50 SHR max: 1.3 Chemical Agent Chemical Resistance Body (Polyester) Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 42 49 55 59 66 0 3 80 0 30 20 35 42 48 53 59 64 68 3 6 0 10 20 30 3 43 48 54 60 63 69 3 50 50 20 39 45 51 55 61 64 6 1 4 50 30 20 33 39 45 49 56 60 63 68 1 50 10 20 29 35 41 45 51 56 59 64 68 30 50 20 3 42 4 51 56 59 62 65 68 30 30 20 32 3 42 46 52 56 59 63 65 30 10 20 28 33 39 43 48 53 56 60 63 0 0 0 25 29 34 38 43 4 49 53 56 BZ-class 6 6 6 6 6 6 6 6 6 See page 532 for design guide Diffuser (Acrylic) Acetic acid 10% Acetone Alcoholic beverages Aluminium sulphate Ammonia 5% Aniline Arsenic acid 20% Benzene Bencylic alcohol Bromine Calcium chloride Calcium nitrate Carbon tetrachloride Carbonic acid Caustic potash 5% Cement Hydrochloric acid 1-5% Chlorine liquids (vapours) Chloroform Chromic acid Citric acid 20% Copper sulphate Diesel-naphta oil Ethyl alcohol 30% Ethyl chloride Ethyl ether Food oils and fats Formic acid 10% Glycerine Chemical Agent Body Diffuser (Polyester) (Acrylic) Hexane Iodine Iron chloride Isopropylic alcohol Lubricating oil Magnesium sulphate Methanol Mineral oils Nitric acid 20% Oxygen Ozone Perchloric acid 10% Petrol Phenol Pothassium bromide Pothassium nitrate Pothassium permanganate Sea climate Silicon oils Soda bleach 15% Sodium chloride Sodium hydroxide 5% Sodium sulphate Sugar Sulphur Sulphuric acid 30% Toluene Trichloroethylene Zinc sulphate Resistant Relatively Resistant Non-Resistant 384 LIGHTING SOLUTIONS www.eaton.eu

Industrial Tufflite TFC IP66 Catalogue Numbers Lamp Rating Gear Option Cat No Weight (kg) Emergency Cat No TFC - GRP body and acrylic diffuser, for T5 lamps (not supplied) 1 x 28W High Frequency TFC6128Z 2. EBTFC6128Z 4.1 2 x 28W High Frequency TFC6228Z 4.5 EBTFC6228Z 5.9 1 x 35W High Frequency TFC6135Z 3.6 EBTFC6135Z 5.0 2 x 35W High Frequency TFC6235Z 6.2 EBTFC6235Z.6 1 x 49W High Frequency TFC6149Z 3.6 EBTFC6149Z 5.0 2 x 49W High Frequency TFC6249Z 6.2 EBTFC6249Z.6 1 x 54W High Frequency TFC6154Z 2. EBTFC6154Z 4.1 2 x 54W High Frequency TFC6254Z 4.5 EBTFC6254Z 5.9 Weight (kg) 1 x 28W DSI Digital Dim TFC6128RD 3.3 EBTFC6128RD 4. 2 x 28W DSI Digital Dim TFC6228RD 5.1 EBTFC6228RD 6.5 1 x 35W DSI Digital Dim TFC6135RD 4.2 EBTFC6135RD 5.6 2 x 35W DSI Digital Dim TFC6235RD 6.8 EBTFC6235RD 8.2 1 x 49W DSI Digital Dim TFC6149RD 4.2 EBTFC6149RD 5.6 2 x 49W DSI Digital Dim TFC6249RD 6.8 EBTFC6249RD 8.2 1 x 54W DSI Digital Dim TFC6154RD 3.3 EBTFC6154RD 4. 2 x 54W DSI Digital Dim TFC6254RD 5.1 EBTFC6254RD 6.5 TFC - GRP body and acrylic diffuser, for T8 lamps (not supplied) 1 x 18W High Frequency TFC6118Z 1.8 - - 2 x 18W High Frequency TFC6218Z 2.1 - - 1 x 36W High Frequency TFC6136Z 2. EBTFC6136Z 4.1 2 x 36W High Frequency TFC6236Z 4.5 EBTFC6236Z 5.9 1 x 58W High Frequency TFC6158Z 3.6 EBTFC6158Z 5.0 2 x 58W High Frequency TFC6258Z 6.2 EBTFC6258Z.6 1 x 0W High Frequency TFC610Z 4.3 EBTFC610Z 5. 2 x 0W High Frequency TFC620Z.9 EBTFC620Z 9.3 1 x 36W DSI Digital Dim TFC6136RD 3.3 EBTFC6136RD 4. 2 x 36W DSI Digital Dim TFC6236RD 5.1 EBTFC6236RD 6.5 1 x 58W DSI Digital Dim TFC6158RD 4.2 EBTFC6158RD 5.6 2 x 58W DSI Digital Dim TFC6258RD 6.8 EBTFC6258RD 8.2 1 x 18W Switch Start TFC6118S 1.9 - - 2 x 18W Switch Start TFC6218S 2.2 - - 1 x 36W Switch Start TFC6136S 2.8 EBTFC6136S 4.2 2 x 36W Switch Start TFC6236S 4.6 EBTFC6236S 6.0 1 x 58W Switch Start TFC6158S 3. EBTFC6158S 5.1 2 x 58W Switch Start TFC6258S 6.3 EBTFC6258S. 1 x 0W Switch Start TFC610S 4.4 EBTFC610S 5.8 2 x 0W Switch Start TFC620S 8.0 EBTFC620S 9.4 For microwave sensor control prefix HF part number with IM, e.g. TFC6149Z becomes IMTFC6149Z For microwave with corridor function prefix RD part number with IM e.g. TFC6149RD becomes IMTFC6149RD For switching PIR sensor control prefix HF part number with D, e.g. TFC6149Z becomes DTFC6149Z For PIR sensor with photocell function prefix RD part number with D, e.g. TFC6149RD becomes DTFC6149RD Accessories Cat No Weight (kg) Stainless steel clip kit, 12 x steel clips TF6SCKIT12 0.1 Plastic clip kit, 12 x plastic clips TF6PCKIT12 0.2 Rear mounting bracket (pair) TF6RMBKT2 0.5 Through wire kit for 600mm, 18W TF6TWKIT600 0.2 Through wire kit for 1200mm, 28/54/36W TF6TWKIT1200 0.4 Through wire kit for 1500mm, 35/49/58W TF6TWKIT1500 0.5 Through wire kit for 1800mm, 0W TF6TWKIT1800 0.6 LIGHTING SOLUTIONS www.eaton.eu 385

Kings Ash Academy Devon 386 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Patriot 2 Patriot 2 W A R R A N T Y YEAR Strength, durability and ease of installation are amongst the key attributes designed into the latest version of our popular Patriot range. An all polycarbonate housing and diffuser provides a high level of vandal resistance and when coupled with the wide variety of finishes and lamp options available allows Patriot 2 to be used for most external and internal applications. Rated at IP65 this dust tight and water jet proof luminaire can be accessed via rear or side cable entry points and installation is simplified through the use of quick release gear trays. 3 hour maintained emergency versions, which pass the 850 C glow wire test, are available as standard making this range suitable for use in defined escape routes as well as open areas. Energy saving models using high frequency control gear form our primary offer but a full complement of switch start versions remain available if required. LED supplements the choice of the very latest energy efficient and long life technologies. Energy efficient bulkhead for interior and exterior use Vandal resistant polycarbonate construction for a durable long life IP65 dust tight and water jet proof for stay clean operation Black or white body colour suits most applications Prismatic or opal diffuser option offers maximum light output or a more diffuse lamp image Quick release geartray for easy installation Supplied with lamp (2D) LED version for a high efficacy, low maintenance option LIGHTING SOLUTIONS www.eaton.eu 38

Industrial Patriot 2 Lamp Options 16W, 28W and 38W 2D compact fluorescent, 3500 K - GR 10q cap LED - 4000 K Dimensions Materials Base - polycarbonate, white or black (LED in round only) Diffuser - opal or clear polycarbonate (LED only opal) Geartray - sheet steel, white finish Installation Notes Suitable for ceiling or wall mounting BESA drill points on rear, and alternative drill points for screw fixing Central cable entry point 3 way, 2 x 1.5mm 2 terminal block Diffuser retained by captive screws Supplied complete with lamp Options Minor size (16W) major size (28, 38W and LED) Fully integral emergency conversion, 3 hour duration Suitable for use on defined escape routes Specification To specify state: Square/Round IP65 vandal resistant compact fluorescent/led luminaire, black/white polycarbonate base, opal/ prismatic polycarbonate diffuser and quick release geartray as Eaton s Patriot 2 range, part no. Lamp Rating L (mm) W (mm) Dia (mm) D (mm) Round Minor - - 200 85 Round Major - - 280 85 Round Major (LED) - - 280 95 Square Minor 200 200-85 Square Major 280 280-85 Photometric Data Cat. No. P2SWP28Z LOR: 0.4 ULOR: 0.10 DLOR: 0.64 SHR nom: 1.5:1 SHR max: 1.:1 Utilisation factors / TM5 Reflectances Room Index C W F 0.5 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 0 50 20 3 43 48 52 58 61 64 68 0 30 31 3 42 46 52 5 60 64 6 10 2 32 38 42 48 52 56 61 64 50 50 20 35 40 45 49 54 5 60 63 65 30 30 35 40 44 49 53 56 60 63 10 26 31 36 40 46 50 53 5 60 30 50 20 33 38 43 46 50 53 56 59 61 30 29 33 38 42 4 50 53 56 59 10 25 30 35 38 43 4 50 54 5 0 0 0 23 2 31 35 39 43 45 49 51 BZ-class 6 6 6 6 6 6 6 6 6 See page 532 for design guide Round 2D Square 2D Round LED 388 LIGHTING SOLUTIONS www.eaton.eu

Industrial Patriot 2 Catalogue Numbers Lamp Rating Gear Option Body Colour Diffuser Type Cat No Weight (kg) Emergency Cat No Patriot 2 Round 1 x 16W High Frequency White Opal P2RWO16Z 0.8 - - 1 x 28W High Frequency White Opal P2RWO28Z 1.0 EBP2RWO28Z 1.5 1 x 38W High Frequency White Opal P2RWO38Z 1.1 - - 1 x 16W High Frequency White Prismatic P2RWP16Z 0.8 - - 1 x 28W High Frequency White Prismatic P2RWP28Z 1.0 EBP2RWP28Z 1.5 1 x 38W High Frequency White Prismatic P2RWP38Z 1.1 - - 1 x 16W Switch Start White Opal P2RWO16S 1.1 - - 1 x 28W Switch Start White Opal P2RWO28S 1.3 - - 1 x 38W Switch Start White Opal P2RWO38S 1.4 - - 1 x 16W Switch Start White Prismatic P2RWP16S 1.1 - - 1 x 28W Switch Start White Prismatic P2RWP28S 1.3 - - 1 x 38W Switch Start White Prismatic P2RWP38S 1.4 - - Weight (kg) Patriot 2 LED LED High Frequency White Opal P2RWO804KZ 1.0 ELP2RWO804KZ 1.4 For black base versions, replace character W with B, e.g. P2RWO804KZ becomes P2RBO804KZ Patriot 2 Square 1 x 16W High Frequency White Opal P2SWO16Z 0.8 - - 1 x 28W High Frequency White Opal P2SWO28Z 1.0 EBP2SWO28Z 1.5 1 x 38W High Frequency White Opal P2SWO38Z 1.1 - - 1 x 16W High Frequency White Prismatic P2SWP16Z 0.8 - - 1 x 28W High Frequency White Prismatic P2SWP28Z 1.0 EBP2SWP28Z 1.5 1 x 38W High Frequency White Prismatic P2SWP38Z 1.1 - - 1 x 16W Switch Start White Opal P2SWO16S 1.1 - - 1 x 28W Switch Start White Opal P2SWO28S 1.3 - - 1 x 38W Switch Start White Opal P2SWO38S 1.4 - - 1 x 16W Switch Start White Prismatic P2SWP16S 1.1 - - 1 x 28W Switch Start White Prismatic P2SWP28S 1.3 - - 1 x 38W Switch Start White Prismatic P2SWP38S 1.4 - - For black base versions, replace character W with B, e.g. P2SWP28Z becomes P2SBP28Z Note: LED version is not available in square base versions LIGHTING SOLUTIONS www.eaton.eu 389

390 LIGHTING SOLUTIONS www.eaton.eu

WARRANTY Industrial Hazardous Area Products Hazardous Area Products W A R R A N T Y YEAR With products of the Crouse-Hinds series, Eaton is the brand that stands for safety and reliability in the hardest of environment, covering the requirements currently placed on modern, explosion-protected, electrical installations, including; illumination, safeguarding, signalling, controlling, instrumentation and distribution of electrical energy in potentially explosive products atmospheres. For more than 100 years CEAG have delivered innovation and safety you can trust in harsh and hazardous environments. We supply products and solutions that comply with all the latest directives and standards worldwide. In addition to systems and components built to ATEX Directives and European Standards, the company also provides solutions approvals, e.g. for Eastern European countries, Russia and Kazakhstan (GOST), China and North America. Many customers operate in the oil and gas business, be it operators of offshore platforms, gas fields, refineries or pipelines or in the chemical and pharmaceutical business. However, explosion protection is also vital in a variety of other areas, such as mining, food processing, bio-ethanol plants, waste water treatment facilities or ship-building. The following pages cover a small section of the CEAG portfolio and include commonly used Zone 1/21 and Zone 2/22 luminaires and associated switch gear and electrical junction boxes to satisfy common project requirements. Where additional hazardous area equipment is required then the full range and expertise of Eaton s Crouse-Hinds series can be accessed to fulfill your project requirements. LIGHTING SOLUTIONS www.eaton.eu 391

Industrial Ex-e Lighting Junction Box and Ex-safety Installation Switches Ex-e Lighting Junction Box Ex-Safety Installation Switches Materials Housing - impact resistant polyamide, black Screws and external metal parts - Stainless steel AISI 316L Installation Notes Suitable for wall, trellis and pipe mounting Suitable for Zone 1, 2, 21, 22 in accordance with EN6009- Designed with 6 x M20 metal thread cable entries, includes 4 threaded M20 plugs IP66 rated Certification PTB 00 ATEX 3108 Dimensions Materials Housing - impact resistant polyamide or GRP in black finish Installation Notes IP66 rated up to 180A Full AC 3-phase switching capacity to EN 6094-4-1 Emergency stop versions to EN 60204-1 Options Safety switches or emergency stop switch options Zone 1/21 certified variants 3 or 6 pole safety switches 10A, 20A, 40A or 80A rated options Wide range of cable entry sizes: M20, M25, M32, M40 and M50 combinations 11. 5 158 X55 195 113.5 X105 56 56 3.5 10.5 Certification Refer to website for certification of the specific catalogue reference selected Enter the catalogue reference in the keyword search on the homepage: www.crouse-hinds.de Dimensions Refer to website for certification of the specific catalogue reference selected Enter the catalogue reference in the keyword search on the homepage: www.crouse-hinds.de 392 LIGHTING SOLUTIONS www.eaton.eu