Proportional Control Valves www.humphrey-products.com
ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing a frictionless, flat-spring armature, ProControl achieves excellent flow characteristics and long life in a simple, compact construction. MiniAtuRE Control up to 24 LPM SMALL Control up to 65 LPM LARGE Control up to 300 LPM Inline Manifold Mount Features and BeneFits: Low hysteresis throughout the range Excellent flow control Low power consumption Long, trouble-free life Quiet operation Compact construction Made in the USA RoHS and REACH compliant Inline Manifold Mount Inline typical applications: Selectable or dynamic control of media flow Control of downstream pressure Vacuum control applications Operation of small bore cylinders Manifold Mount
Half-Sections, Specifications, Drawings & Charts 30 Performance,, 0 10v, 0.0" Orifice (Typical) Core Coil psi 50 psi 100 psi Armature Nozzle FLOW (LPM) 15 10 5 Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) 0 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 AMPERAGE (A) Specifications type of Operation: direct Acting function: 2-Way, Normally closed media: Air, Vacuum or inert gas vacuum/pressure range: Hg ~ 100 psig ambient temp. range: -º to 0ºF available Orifices (inches): @ psig @ 50 psig @ 100 psig.0 /.040 /.060.0 /.040.0 maximum flow (lpm): 24 lubrication: Not required filtration: 40 Micron response time (full span): 5-8 ms Weight (lbs): 0.15 Wetted materials: ENp Brass, stainless steel, Nickel plated steel, FKM max. Hysteresis: 10% power consumption (watts): 2.0 nominal resistance @72ºf (Ohms): 52 273 input current for full flow (ma): 192 73 Inline Dimensional Drawings inline mounting Hole pattern.40. #6-32 ` 0. Manifold Mount Dimensional Drawings O.854.88.73 O.88 O.73.215 O.093 MAX O.110 MAX CHAMFER O.430 CIRCLE THREADS x.0` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS.19 PORT UNF ACROSS FLATS 1.55 PORT UNF.19 R O EF THREAD MOUNTING SCREW 1.51 1.68 (THRU MOUNTING SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN
Half-Sections, Specifications, Drawings & Charts 70 Performance,, 0 10v, 0.040" Orifice (Typical) 60 50 psi 50 psi 100 psi Core Coil Armature FLOW (LPM) 40 30 Nozzle 10 Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) 0 0 0.05 0.1 0.15 0.2 0. 0.3 0.35 AMPERAGE (A) Specifications type of Operation: function: media: vacuum/pressure range: direct Acting 2-Way, Normally closed Air, Vacuum or inert gas Hg ~ 100 psig ambient temp. range: -º to 0ºF available Orifices (inches): @ psig @ 50 psig @ 100 psig.040 /.060 /.090.040 /.060.040 maximum flow (lpm): 65 lubrication: Not required filtration: response time (full span): 40 Micron 5-8 ms Weight (lbs): 0.4 Wetted materials: ENp Brass, stainless steel, Nickel plated steel, FKM max. Hysteresis: 10% power consumption (watts): 5.8 nominal resistance @72ºf (Ohms): input current for full flow (ma): 17 70 588 285 Inline Dimensional Drawings inline mounting Hole pattern.40. #6-32 ` 0. Manifold Mount Dimensional Drawings O.854.215 O.093 MAX O.110 MAX CHAMFER O.430 CIRCLE.73 O.88 O.73 O THREADS x.0` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS.188.85 O PORT THREADS 2.61 0 ACROSS FLATS.76 PORT THREADS.188.88 O THREAD MOUNTING SCREW 2.56.71.87 (THRU MOUNTING SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN
Half-Sections, Specifications, Drawings & Charts Performance,, 0 10v, 0.156" Orifice (Typical) 350 Core 300 psi 50psi 0 FLOW (LPM) Coil Armature Nozzle 100psi 0 150 100 50 0 Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) 0 0.05 0.1 0.15 0.2 0. 0.3 0.35 0.4 0.45 0.5 AMPERAGE (A) Specifications type of Operation: filtration: direct Acting 40 Micron function: 2-Way, Normally closed response time (full span): media: Air, Vacuum or inert gas Weight (lbs): vacuum/pressure range: Hg ~ 100 psig ambient temp. range: -º to 0ºF available Orifices (inches): @ psig @ 50 psig @ 100 psig inline mounting Hole pattern 10% power consumption (watts): Not required Inline Dimensional Drawings ENp Brass, stainless steel, Nickel plated steel, FKM max. Hysteresis: 300 lubrication: 0.9 Wetted materials:.156 /.188 /.0.156 /.188.156 maximum flow (lpm): 5-8 ms 5.8 nominal resistance @72ºf (Ohms): 19 70 input current for full flow (ma): 5 285 Manifold Mount Dimensional Drawings.75 1 1/4 x 28 `. O.1 MAX O.155 MAX CHAMFER RED - 10 VDC WHITE - VDC RED - 10 VDC WHITE - VDC.430 O 1.51 O.860 CIRCLE 3/8-24 THREADS x.375` MIN.0 x 45 EDGE CHAMFER O 1.51 3.27 O 1.82 O 1.82 BETWEEN 0-RINGS ON CIRCLE DIAMETER SHOWN.36 O 1.62 PORT 1/8 NPSF MOUNTING INTERFACE 2.84 O 1 OVER FLATS PORT 1/8 NPSF 3/8-24 MOUNTING THREADS.32 THRU CENTER
How to Order ProControl ElEctrical connection V Wire Leads + port type p inline pm Manifold How to Order voltage 10-0 to 10 Vdc - 0 to Vdc ProControl A0 VP OrificE size - 0.0 (100 psig max) 40-0.040 (50 psig max) 60-0.060 ( psig max) maximum pressure* - psig 50-50 psig A0-100 psig 60 50 ElEctrical connection V Wire Leads + port type p inline pm Manifold Proportional Valves How to Order Proportional Valves 10 Proportional Valves ProControl VP voltage 10-0 to 10 Vdc - 0 to Vdc VPM OrificE size 40-0.040 (100 psig max) 60-0.060 (50 psig max) 90-0.090 ( psig max maximum pressure* - psig 50-50 psig A0-100 psig A0 156 ElEctrical connection V Wire Leads + port type p inline pm Manifold voltage 10-0 to 10 Vdc - 0 to Vdc OrificE size 156-0.156 (100 psig max) 188-0.188 (50 psig max) 0-0.0 ( psig max maximum pressure* - psig 50-50 psig A0-100 psig While the medical, analytical instrumentation and testing/measurement applications have been common, ProControl valves are suitable for most market segments, including ProControl pressure regulators. The flexible valve design can be tailored to meet specific requirements, via Humphrey Engineered Solutions. For more information on Engineered Solutions, please visit www.humphrey-products.com. A privately owned Us company since 1901. www.humphrey-products.com Humphrey products company p.o. Box 08 Kalamazoo, Mi 49003 UsA p.269.381.5500 F.269.381.4113 pcpv-15 copyright 15 Humphrey products company, inc. printed in U.s.A. Order Example: -VP-10--A0 * Corresponding Maximum PSIG, 50, A0, 50 Orifice Size 0.0 orifice 0.040 orifice 0.060 orifice Order Example: -VP--60-50 * Corresponding Maximum PSIG, 50, A0, 50 Orifice Size 0.040 orifice 0.060 orifice 0.090 orifice Order Example: -VPM--156-A0 * Corresponding Maximum PSIG, 50, A0, 50 Orifice Size 0.156 orifice 0.188 orifice 0.0 orifice