4 Dimensions for motor A 13 10 B Changeable drive adapter. Standard drive adapters 20mm, variations possible Grub screw (for changing motor bolt) l50 l48 Plug-In cable with standard 16 x 10mm bolt (short side) with standard 16 x 10mm bolt (long side) 9 17 11.5 9 17.5 16x10 16x10 10x10 16x16 4 Type Also includes electronic versions ending with: Dimension Dimension A B 9/05 K 9/1.3 K ACS-E 451 418 ACS-E, ACS-868, ACS-SMI, CSJR-SMI, CSJR-DMI 9/05 9/2.5 508 475 CSM-E, CSM-868, CSM-F-868, CSM-SMI ACS-E, ACS-868, ACS-SMI, CSJR-SMI, CSJR-DMI 9/3 542 509 CSM-E, CSM-868, CSM-F-868, CSM-SMI ACS-E, CSJR-SMI, CSJR-DMI 9/4 9/5 562 529 CSM-E, CSM-868, CSM-F-868, CSM-SMI 9/05/68 542 509 9/05/25 9/1.3/25 CSM-E, CSM-868, CSM-F-868, DMS 508 475 with optional 10 x 10mm bolt (#13 107.0202) maximum 30 Nm with optional 16 x 16mm bolt (#23 172.0001) 4.5 8.5 6 4 6 24 24 dimensions and technical data subject to changes
Technical data for motor Type Max. Max. lifting Smallest Speed Max. limit Side Voltage Current Power Running Ingress VDE-EMC VDE CE torque capacity clear inside switch space 50 Hz time protection approved approved approved on 50 mm diameter range require- interoutside of tube ment mittent dia. tube Nm N mm rpm turns mm volt ampere watts min. IP 9/05 5 200 47 14 21 21 230 Z 0.64 145 4 44 9/05/68 5 200 47 68 21* 21 230 Z 1.1 260 4 44 9/05 K 5 200 47 14 15 21 230 Z 0.64 145 4 44 9/08 8 320 47 14 21* 21 230 Z 0.64 145 4 44 9/08 K 8 320 47 14 15 21 230 Z 0.64 145 4 44 9/1/25 10 400 47 25 21* 21 230 Z 0.85 190 4 44 9/1.3 13 520 47 14 21 21 230 Z 0.64 145 4 44 9/1.3/25 13 520 47 25 21* 21 230 Z 0.92 210 4 44 9/1.3 K 13 520 47 14 15 21 230 Z 0.64 145 4 44 9/2 20 800 47 14 21 21 230 Z 0.85 190 4 44 9/2.5 25 1000 47 14 21 21 230 Z 0.92 210 4 44 9/3 30 1200 47 14 21 21 230 Z 1.1 260 4 44 9/4 40 1600 47 14 21 21 230 Z 1.22 280 4 44 9/5 50 2000 47 10 21 21 230 Z 1.22 280 4 44 9/05k ACS-E 5 200 48 14 40 21 230 Z 0,64 145 4 44 9/08k ACS-E 8 320 48 14 40 21 230 Z 0,64 145 4 44 9/1.3k ACS-E 13 520 48 14 40 21 230 Z 0,64 145 4 44 9/05 ACS-E 5 200 48 14 40 21 230 Z 0,64 145 4 44 9/08 ACS-E 8 320 48 14 40 21 230 Z 0,64 145 4 44 9/08 ACS-868 8 320 48 14 40 21 230 Z 0.64 145 4 44 9/1.3 ACS-E 13 520 48 14 40 21 230 Z 0,64 145 4 44 9/1.3 ACS-868 13 520 48 14 40 21 230 Z 0.64 145 4 44 9/2 ACS-E 20 800 48 14 40 21 230 Z 0.85 190 4 44 9/2 ACS-868 20 800 48 14 40 21 230 Z 0,85 190 4 44 9/2.5 ACS-E 25 1000 48 14 40 21 230 Z 0,92 165 4 44 9/3 ACS-E 30 1200 48 14 40 21 230 Z 1,10 190 4 44 9/3 ACS-868 30 1200 48 14 40 21 230 Z 1,10 260 4 44 9/4 ACS-E 40 1600 48 14 40 21 230 Z 1,22 260 4 44 9/05 CSM-E 5 200 47 14 40 21 230 Z 0,64 145 4 44 9/05/25 CSM-F-868 10 400 47 25 40 21 230 Z 0,85 190 4 44 9/08 CSM-E 8 320 47 14 40 21 230 Z 0,64 145 4 44 9/1/25 CSM-E 10 400 47 25 40 21 230 Z 0,85 190 4 44 9/1/25 CSM-868 10 400 47 25 40 21 230 Z 0,85 190 4 44 9/1/25 CSM-F-868 10 400 47 25 40 21 230 Z 0,85 190 4 44 9/1.3 CSM-E 13 520 47 14 40 21 230 Z 0,64 145 4 44 9/1.3 CSM-868 13 620 47 14 40 21 230 Z 0,64 145 4 44 9/1.3 CSM-F-868 13 620 47 14 40 21 230 Z 0,64 145 4 44 9/1.3/25 CSM-E 13 520 47 25 40 21 230 Z 0,92 210 4 44 9/2 CSM-E 20 800 47 14 40 21 230 Z 0,85 190 4 44 9/2.5 CSM-E 25 1000 47 14 40 21 230 Z 0,92 210 4 44 9/2.5 CSM-868 25 1000 47 14 40 21 230 Z 0,92 210 4 44 9/2.5 CSM-F-868 25 1000 47 14 40 21 230 Z 0,92 210 4 44 9/3 CSM-E 30 1200 47 14 40 21 230 Z 1,1 260 4 44 9/3 CSM-868 30 1200 47 14 40 21 230 Z 1,1 260 4 44 9/3 CSM-F-868 30 1200 47 14 40 21 230 Z 1,1 260 4 44 9/4 CSM-E 40 1600 47 14 40 21 230 Z 1,22 280 4 44 9/4 CSM-868 40 1600 47 14 40 21 230 Z 1,22 280 4 44 9/4 CSM-F-868 40 1600 47 14 40 21 230 Z 1,22 280 4 44 9/5 CSM-E 50 2000 47 10 40 21 230 Z 1,22 280 4 44 Motors for different Voltages (100 240 V) and frequencies (50 60 Hz) are available. Contact us for more information. Radio motors are alternatively available with 915.3 MHz. Contact us for more information. * On request available with 32 turns limit switch range. dimensions and technical data subject to changes 25
Technical data and dimensions for motor NHK with manual override limit switch adjusting screw hexagon 4 mm X hexagon socket SW7 Optional square bolt 13 102.5201 Type A B C 9/08 2.5 NHK 617 559 585 9/3.3 4 NHK 651 593 619 9/5 NHK 717 659 685 interchangeable drive wheel X = Dimension depending on drive adapter in use. Dimensions available on request. l 12.5 x 18.5 depth with plug-in cable! Wall bracket 13 106.3501 Technical data 7 mm hexagonal with awning eyelet 23 771.0002 Wall bracket 13 301.0801 Built-on roller shutter Type Max. Lifting Smallest Speed Max. limit Side Voltage Current Power Running Ingress Manual VDE-EMC VDE CE torque capacity clear inside switch space 50 Hz time protection override approved approved approved on diameter range require- intermittent splash gear smallest of tube in one ment water ratio tube direction proof Nm N mm rpm turns mm volt amps watts min. IP Counterpart support for adapter cone 23 772.0002 hinged crank handle with counterpart support an 7 mm hexagonal 23 764.0002 Counterpart support with awning eyelet 23 731.0002 9/08 NHK 8 320 47 14 29 24 230 Z 0.64 145 5 44 30 : 1 9/1.3 NHK 13 520 47 14 29 24 230 Z 0.64 145 5 44 30 : 1 9/2 NHK 20 800 47 14 29 24 230 Z 0.85 190 4 44 30 : 1 9/2.5 NHK 25 1000 47 14 29 24 230 Z 0.92 210 4 44 30 : 1 9/3 NHK 30 1200 47 14 29 24 230 Z 1.1 260 4 44 30 : 1 9/4 NHK 40 1600 47 14 29 24 230 Z 1.22 280 4 44 30 : 1 9/5 NHK 50 2000 47 10 29 24 230 Z 1.22 280 4 44 30 : 1 Motors for different Voltages (100-240 V) and frequencies (50-60 Hz) are available. Contact us for more information. 26 dimensions and technical data subject to changes
motors (50 mm tubes and bigger) Item Number Type/Item Description Motor with mechanical limit switch 230 V/50 Hz smallest clear inside diameter of tube: 47 mm motor bolt 16 x 10 mm, 1.5 m connecting cable 31 273.0003 9/05, torque 5 Nm, 14 rpm 31 991.0003 9/05/68, torque 5 Nm, 25 rpm 31 263.0001 9/05 K*, torque 5 Nm, 14 rpm 31 441.0009 9/08, torque 8 Nm, 14 rpm 31 401.0002 9/08 K*, torque 8 Nm, 14 rpm 31 801.0003 9/1/25, torque 10 Nm, 25 rpm 31 471.0009 9/1.3, torque 13 Nm, 14 rpm 31 791.0003 9/1.3/25, torque 13 Nm, 25 rpm 31 411.0002 9/1.3 K*, torque 13 Nm, 14 rpm 31 451.0007 9/2, torque 20 Nm, 14 rpm 31 461.0007 9/2.5, torque 25 Nm, 14 rpm 31 501.0007 9/3, torque 30 Nm, 14 rpm 31 703.0001 9/4, torque 40 Nm, 14 rpm 31 713.0001 9/5, torque 50 Nm, 10 rpm *Short version (dimensions on page 24) Motor with mechanical limit switch and manual override 230 V/50 Hz, smallest clear inside diameter of tube: 47 mm motor bolt 16 x 16 mm 1.5 m connecting cable 31 171.0004 9/08 NHK, torque 8 Nm, 14 rpm 31 181.0004 9/1.3 NHK, torque 13 Nm, 14 rpm 31 191.0003 9/2 NHK, torque 20 Nm, 14 rpm 31 211.0003 9/2.5 NHK, torque 25 Nm, 14 rpm 31 221.0004 9/3 NHK, torque 30 Nm, 14 rpm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Manual override accessories (on page 63) and brackets (on page 63) 31 925.0001 9/4 NHK, torque 40 Nm, 14 rpm 31 935.0001 9/5 NHK, torque 50 Nm, 10 rpm Motors for different Voltages (100 240 V) and frequencies (50 60 Hz) are available. Contact us for more information. dimensions and technical data subject to changes 27
motors (50 mm tubes and bigger) Item Number Type/Item Description ACS-E roller shutter drive with electronic obstacle detection (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 48 mm profile tubes, motor bolt 16 x 10 mm 1.5 m connecting cable 31 665.0001 9/05 ACS-E torque 5 Nm, 14 rpm 31 835.0001 9/05 K* ACS-E torque 5 Nm, 14 rpm 31 675.0001 9/08 ACS-E torque 8 Nm, 14 rpm 31 845.0001 9/08 K* ACS-E torque 8 Nm, 14 rpm Prices do not include drive adapters wall brackets (motor brackets) switches 31 695.0001 9/1.3 ACS-E torque 13 Nm, 14 rpm 31 855.0001 9/1.3 K* ACS-E torque 13 Nm, 14 rpm 31 715.0001 9/2 ACS-E torque 20 Nm, 14 rpm 31 725.0001 9/2.5 ACS-E torque 25 Nm, 14 rpm 31 735.0001 9/3 ACS-E torque 30 Nm, 14 rpm 31 905.0001 9/4 ACS-E torque 40 Nm, 14 rpm * short version (for dimensions see page 24) ACS-868 roller shutter drive with electronic obstacle detection and built in radio receiver 868 MHz (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 48 mm profile tubes, motor bolt 16 x 10 mm 1.5 m connecting cable 31 367.0001 9/08 ACS-868, torque 8 Nm, 14 rpm 31 537.0003 9/1.3 ACS-868, torque 13 Nm, 14 rpm 31 377.0001 9/2 ACS-868, torque 20 Nm, 14 rpm 31 387.0001 9/3 ACS-868, torque 30 Nm, 14 rpm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Radio transmitters (on page 77-79) Motors for different Voltages (100 240 V) and frequencies (50 60 Hz) are available. Radio motors are alternatively available with 915.3 MHz. Contact us for more information. 28 dimensions and technical data subject to changes
motors (50 mm tubes and bigger) Item Number Type/Item Description CSM-E awning drive with electronic limits (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 47 mm, motor bolt 16 x 10 mm, 1.5 m connecting cable 31 334.0001 9/05 CSM-E torque 5 Nm, 14 rpm 31 344.0001 9/08 CSM-E torque 8 Nm, 14 rpm 31 594.0001 9/1/25 CSM-E torque 10 Nm, 25 rpm 31 354.0001 9/1.3 CSM-E torque 13 Nm, 14 rpm 31 614.0001 9/1.3/25 CSM-E torque 13 Nm, 25 rpm 31 364.0001 9/2 CSM-E torque 20 Nm, 14 rpm 31 374.0001 9/2.5 CSM-E torque 25 Nm, 14 rpm 31 384.0001 9/3 CSM-E torque 30 Nm, 14 rpm 31 915.0001 9/4 CSM-E torque 40 Nm, 14 rpm CSM-868 awning drive with electronic limits and built in radio receiver 868 MHz (Torque stop on top, limited or self learning on bottom) Voltage, diameter, bolt and cable same as CSM-E motor 31 587.0001 9/05/25 CSM-868 torque 5 Nm, 25 rpm 31 287.0001 9/1/25 CSM-868 torque 10 Nm, 25 rpm 31 297.0001 9/1.3 CSM-868 torque 13 Nm, 14 rpm 31 307.0001 9/2.5 CSM-868 torque 25 Nm, 14 rpm 31 317.0001 9/3 CSM-868 torque 30 Nm, 14 rpm 31 327.0001 9/4 CSM-868 torque 40 Nm, 14 rpm CSM-F-868 awning drive with electronic limits and built in radio receiver 868 MHz (Electronically limited on to and bottom) Voltage, diameter, bolt and cable same as CSM-E motor 31 627.0001 9/05/25 CSM-F-868 torque 5 Nm, 25 rpm 31 637.0001 9/1/25 CSM-F-868 torque 10 Nm, 25 rpm 31 647.0001 9/1.3 CSM-F-868 torque 13 Nm, 14 rpm 31 657.0001 9/2.5 CSM-F-868 torque 25 Nm, 14 rpm 31 667.0001 9/3 CSM-F-868 torque 30 Nm, 14 rpm 31 677.0001 9/4 CSM-F-868 torque 40 Nm, 14 rpm Alternative motor bolts for all motors, except NHK 13 107.0202 10 x 10 mm, max. 30 Nm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Radio transmitters (on page 77-79) 23 172.0001 16 x 16 mm, to suit T11 motor brackets (page 18 & 48). Dimensions designed to replace Type 11with motor without change in bracket and spacing. Motors for different Voltages (100 240 V) and frequencies (50 60 Hz) are available. Radio motors are alternatively available with 915.3 MHz. Contact us for more information. dimensions and technical data subject to changes 29
drive adapters Item Number Type/Item Description drive wheel limit switch crown For 1:1 scaled drive adapter outlines for easy matching with your tube refer to Page 33-39 for Notch & Profile tubes Page 40-41 for hexagonal and octagonal tubes Drive adapters for Round and Notch tubes includes drive wheel and limit switch crown 13 105.5701 Ø 50 x 1.5 mm round tube not for ACS-E, wheel only 13 110.7401 Ø 50 mm round tube (Siral) not for ACS-E, wheel only 23 586.0001 Ø 55 mm elero profile tube 23 870.0002 Ø 57 mm aluminium profile tube (MHZ, Ates) 23 834.0001 Ø 58 mm aluminium profile tube (Thermo Perco) 23 874.0001 Ø 60 mm profile tube (Alu-Plastik) 23 333.0001 Ø 60 profile/ notch tube (Griesser, Hüppe, Carros) 23 578.0002 Ø 60 x 1.5 & 62 x 2 mm round tube 23 510.0001 Ø 62 mm notch tube 23 562.0001 Ø 62 mm profile tube (LeProfil, Krülland) 23 585.0001 Ø 63 x 1.5 mm round tube 23 583.0001 Ø 63 x 1 mm notch tube (Welser) 23 530.0001 Ø 63 mm notch tube 23 558.0001 Ø 64 mm profile tube (Zurflüh-Feller) 23 522.0001 Ø 65 mm profile tube (HOOS) 23 556.0001 Ø 65 mm profile tube (IMBAC, Metalpress, Eckermann) 23 359.0001 Ø 67.5 x 1.5 mm profile tube (MHZ) 23 546.0001 Ø 70 x 1.5 mm round tube 23 346.0001 Ø 70 x 1 mm notch tube (MHZ) 23 547.0001 Ø 70 mm notch tube (round notch) 23 559.0001 Ø 70 mm notch tube 23 563.0001 Ø 70 mm notch tube (Imbac, Ahlquist) 23 581.0002 Ø 70 mm decagonal notch tube (Perma) 23 641.0001 Ø 70 mm notch tube (Griesser) 23 700.0001 Ø 70 mm notch tube (Welser) 23 320.ooo1 Ø 71 x 1.5 mm notch tube (Hassinger) 23 560.0001 Ø 74 mm notch tube 23 336.0001 Ø 76 x 1.2 mm profile tube Kittelberger 23 580.0001 Ø 78 mm notch tube 23 538.0001 Ø 78 mm notch tube (Döhner/Hassinger) 23 600.0001 Ø 78 mm notch tube (MHZ) 23 540.0001 Ø 78 x 1 mm notch tube 23 528.0001 Ø 80 mm Zurflüh 23 622.0001 Ø 83 x 1.5 mm round tube 23 681.0001 Ø 85 mm notch tube 23 643.0001 Ø 85 mm notch tube (Griesser) 23 542.0001 Ø 90 mm wide notch tube (Le Profil) 23 360.0001 Ø 90.5 x 1.25 mm notch tube (MHZ) 23 372.0001 Ø 102 x 1.5 mm round tube 23 010.0001 Ø 135 x 2.5 mm round tube Octagonal and hexagonal drive adapters 23 873.0001 50 x 1.5 mm octagonal (Rau, not for ACS-E) 23 301.0001 50 mm octagonal (Selve) 23 554.0001 60 mm hexagonal (Butzbach, Mäule) 23 534.0001 60 mm octagonal (Imbac) 23 555.0001 60 mm octagonal (Selve, Döhner, Eckermann) 23 557.0001 70 mm octagonal (Martin) 23 906.0001 60 mm octagonal (Bonfonte) 23 529.0001 70 mm octagonal (Selve, Döhner, Eckermann) 23 548.0001 75 mm hexagonal (Butzbach, Mäule) 23 541.0001 78 Pentagonal tube (Meimo) 30 dimensions and technical data subject to changes
wall brackets Item Number Type/Item Description 13 108.0201 White plastic adapter for any brackets with 16 x 16 mm (page 18 & 48) to convert to 16 x 10 mm ( motors) M6 Wall brackets (motor bracket) 30 13 300.0801 Wall bracket (10 x 16 mm), limbus Ø 48 mm 60 48 25 80 M6 60 13 106.1701 Wall bracket (10 x 16 mm), limbus Ø 60 mm screw thread M8 71 48 M8 13 301.7001 Flat wall bracket (2x 10 x 16 mm), limbus Ø 48 mm 40 Wall brackets (motor bracket) 23 429.0002 Universal wall bracket (10 x 16 mm), disengageable 23 985.0001 Metal wall bracket (10 x 16 mm), with rubber damping 23 986.0001 Spring "Clip-in" wall bracket (10 x 16 mm), limbus Ø 48 mm 13 301.4601 Closed wall bracket (2x 10 x 16 mm) brace 13 113.1301 Wall bracket (2x 10 x 16 mm), cross, for plastering into wall 13 300.0602 Forked wall bracket (10 x 16 mm) 13 302.2601 Mounting plate for motor bracket type 8 and type 9 (Stakusit) 13 302.2401 Mounting plate for motor bracket type 8 and type 9 (Thyssen, Schüco, Brügmann, Home, VEKA) 78 mm l 93 mm 48 mm 13 302.7801 Universal mounting plate for type 8 & 9 brackets 60 mm 23 276.0001 Mounting plate with motor bracket 23 986.0001 (for Thyssen, Schüco, Veka, Home) dimensions and technical data subject to changes 31
48 wall brackets Item Number Type/Item Description 23 237.0201 Motor bracket to place over 12 mm centre pin, with torque support for pre-mounting units (135 205 mm) up to 30 Nm 23 262.0001 Special wall bracket type 9 for Elket overhead-mounting units up to 20 Nm 6,6 85 100 23 832.0001 Base plate with motor bracket type 9 23 965.0002 Clamping bracket onto roller bearing support for type 9 motors with max. 25 Nm torque. 30 Nm torque in conjunction with plastered bearing support 45 100 75 60 13 106.8501 Wall bracket for type 9 up to 20 Nm only for mini roller shutter cases with bolts up to Ø 12 mm 80 44 95 105 23 107.0001 Plastic wall bracket for pre-mounting units, complete with steel base plate, spring clip and bracket for type 9 drives with max. 25 Nm torque 13 107.0001 As above, plastic bracket only 80 51 32 23 260.0001 Aluminium wall bracket for pre-mounting units, complete with steel base plate, spring clip and bracket for all type 9 drives Same dimensions as # 23 107.0001 13 112.6901 As above, aluminium bracket only Same dimensions as bracket # 13 107.0001 32 dimensions and technical data subject to changes
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 50 x 1.5 mm round tube 13 105.5701 50 x 1.5 Siral 13 110.7401 ø 55 mm profile tube, round 23 586.0001 ø 57 mm Ates aluminium profile tube 23 870.0002 ø 58 mm profile tube Thermo Perco 23 834.0001 ø 62 x 2 mm, ø 60 x 1.5 mm round tube 23 578.0002 dimensions and technical data subject to changes 33
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 60 x 1 mm profile tube (Alu-Plastik) 23 874.0001 ø 63 mm, Griesser, Hüppe, 23 333.0001 Ø 62 mm Le Profil + Krülland 23 562.0001 ø 62 mm round tube 23 510.0001 ø 63 x 1.5 mm round tube 23 585.0001 63 mm notch tube 23 583.0001 63 mm notch tube 23 530.0001 ø 64 mm Zurflüh-Feller 23 558.0001 34 dimensions and technical data subject to changes
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 65 mm Hoos 23 522.0001 ø 65 mm Imbac, Metallpress, Eckermann 23 556.0001 ø 67.5 x 1.5 mm, MHZ 23 359.0001 ø 70 x 1.5 mm, round tube 23 546.0001 ø 70 x 1 mm, MHZ 23 346.0001 ø 70 mm notch tube (round notch) 23 547.0001 ø 70 mm notch tube 23 559.0001 dimensions and technical data subject to changes 35
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 70 mm notch tube (Imbac, Ahlquist) 23 563.0001 Ø 70 mm, notch tube (Perma) 70 x 0.7 mm, decagonal 23 581.0002 ø 70 mm notch tube (Griesser) 23 641.0001 Ø 70 mm notch tube 23 700.0001 ø 71 x 1.5 mm Hassinger 23 320.0001 ø 74 mm notch tube 23 560.0001 ø 76 x 1.2 mm Kittelberger 23 336.0001 36 dimensions and technical data subject to changes
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 Ø 83 x 1.5 mm round tube 23 622.0001 ø 85 x 1 mm notch tube 23 681.0001 ø 85 mm round tube (Griesser) 23 643.0001 Ø 90 mm LeProfil, Ø 89 mm Deprat 23 542.0001 38 dimensions and technical data subject to changes
Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 Ø 90.5 x 1.25 mm, MHZ 23 360.0001 ø 102 x 1.5 mm round tube 23 372.0001 ø 135 x 2.5 mm round tube 23 010.0001 dimensions and technical data subject to changes 39
Drive adapters for type 9 motors Hexagonal and octagonal tubes Profiles for drive adapters. Scale 1 : 1 50 x 1.5 mm octagonal, Rau 23 873.0001 Flats 50 mm Selve octagonal 23 301.0001 60 mm Butzbach, Mäule hexagonal 23 554.0001 Flats 60 mm Imbac octagonal 23 534.0001 Flats 60 mm, octagonal, Döhner, Selve, Eckermann, Heizmann 23 555.0001 Flats 60 mm Martin octagonal 23 557.0001 40 dimensions and technical data subject to changes
Drive adapters for type 9 motors Hexagonal and octagonal tubes Profiles for drive adapters. Scale 1 : 1 Flats 60, octagonal Bonfante 23 906.0001 70 x 1 mm Selve, Eckermann octagonal 23 529.0001 75 mm Butzbach / Mäule hexagonal 23 548.0001 78 mm, Meimo pentagonal 23 541.0001 dimensions and technical data subject to changes 41