PG.05E.07.T.E August 007 High Optical Performance and a Built-In Swivel Bracket for Easy and Precise Alignment Contents Overview...................... Model Selection, Sensors........ Model Selection, Compatible Cables.............. 4 Model Selection, Accessories...... 5 Wiring Diagrams................ 6 Specifications................... 7 Dimensions.................... 7 Glass Fiber Optic Models Output Indicator LED High Performance Optics Cutler-Hammer Photoelectric Sensors are identical to Eaton s 50 Series except without the interchangeable outputs or logic functions. They offer durability and high optical performance in a costeffective, self-contained package. The features sensors with AC and operation in a single unit. A relay option is available on these models that provides a 3 Amp SPDT relay output for high current switching. Sensors are available that in thrubeam, reflex, polarized reflex, diffuse reflective and fiber optic sensing modes. Each sensor features a built-in swivel bracket for easy mounting and to allow precise adjustment of the sensor alignment. Approvals UL Listed CSA Certified Unless otherwise noted, the products contained in this document are not designed or intended for use in human safety applications. Choose from Cable or Built-In Mini- Product Features Built-In Ball-Swivel Bracket High optical performance includes 00-foot (30.5m) thru-beam range and 6-foot (.8m) diffuse reflective range Both AC and operation in a single unit Short circuit protected solid-state outputs on AC/ and -only versions (except thru-beam) Relay output option provides 3 Amp current switching on AC/ models Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in Fully potted construction for use in areas subject to washdown, high shock and/or vibration Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (.8m) Built-in, patented, 360 rotation 0 tilt ball-swivel base For Customer Service in the U.S. call -877-ETN CARE (386-73), in Canada call -800-68-3578. For Application Assistance in the U.S. and Canada call -800-46-984. PG.05E.07.T.E
August 007 Model Selection Sensors Sensing Range Optimum Field of View Range Component Sensing Beam Connection Type and output Catalog Number Light Operate Dark Operate 5V AC 70 feet (.3m) Standard Reflex Minimum object size is 0.4 x 0.7 Inches (0 x 8 mm) Detector For a complete system, order One and One Detector 30V AC 00 feet (30.5m) 70 feet (.3m) 00 feet (30.5m) 0 30V 70 feet (.3m) 0 64V AC or 5 30V 00 feet (30.5m) 30 feet (9.m) 0. 35 feet (0.03 m) 0. 50 feet (0.03 5m) 0. 35 feet (0.03 m) 0. 50 feet (0.03 5m) 0. 35 feet (0.03 m) 0. 50 feet (0.03 5m) 0 5 feet (0 4.6m) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) inch (5 mm) Infrared (with visible red LED to aid 6-foot Cable 55A-65 -pin Mini- 55A-650 Detector alignment) 6-foot Cable 56A-65 56A-650 6-foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 55A-65 55A-650 6-foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 56A-65 56A-650 6-foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 55A-65 55A-650 6-foot Cable 55A-657 -pin Mini- 55A-6507 Detector 6-foot Cable 56A-657 4-pin Mini- 56A-6507 6-foot Cable 55A-657 -pin Mini- 55A-6507 Detector 6-foot Cable 55A-657 4-pin Mini- 55A-6507 Infrared 6-foot Cable 455A-653 455AD653 6-foot Cable 455R-653 455RD653 455A-6503 455AD6503 (Not Included) For a complete system, order Sensor and (See PG.05E.7.T.E) Sensor 0 30V 30 feet (9.m) 0 5 feet (0 4.6m) inch (5 mm) 5-pin Mini- 455R-6503 455RD6503 Infrared 6-foot Cable 455A-657 455AD657 4-pin Mini- 455A-6507 455AD6507 Ranges based on 3-inch retroreflector for reflex sensors, 90% reflectance white card for diffuse reflective sensors. See Excess Gain graphs on Page 4. Fast turn product with typical one business day lead-time to shipment. See listing of compatible connector cables on Page 4.
3 August 007 Model Selection Sensors (Continued) Polarized Reflex 0 64V AC or 5 30V Sensing Range 5 feet (4.6m) 0.5 6 feet (0..8m) Optimum Field of View Sensing Range Beam inch (5 mm) Connection Type Catalog Number Light Operate Dark Operate Visible Red 6-foot Cable 456A-653 456AD653 6-foot Cable 456R-653 456RD653 456A-6503 456AD6503 (Not Included) Sensor For a complete system, order Sensor and (See PG.05E.7.T.E) 0 30V 5 feet (4.6m) 0.5 6 feet (0..8m) inch (5 mm) 5-pin Mini- 456R-6503 456RD6503 6-foot Cable 456A-657 456AD657 4-pin Mini- 456A-6507 456AD6507 Diffuse Reflective Fiber Optic Glass Fiber Optic Cables Not Included (See PG.05E.5.T.E) 0 64V AC or 5 30V 0 30V 0 64V AC or 5 30V 0 30V 0 inches (54 mm) 4 inches (60 mm) 7 inches (88 mm) 0 inches (54 mm) 4 inches (60 mm) 7 inches (88 mm) : inches (305 mm) Diffuse Reflective:.5 inches (57 mm) : inches (305 mm) Diffuse Reflective:.5 inches (57 mm) 0.5 5 inches (6 7 mm) 8 inches (5 03 mm) 36 inches (5 94 mm) 0.5 5 inches (6 7 mm) 8 inches (5 03 mm) 36 inches (5 94 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) 5.5 inch (40 mm) 4 inches (60 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) 5.5 inch (40 mm) 4 inches (60 mm) Depends on Fiber Selected Depends on Fiber Selected Infrared 6-foot Cable 355A-653 355AD653 6-foot Cable 355R-653 355RD653 355A-6503 355AD6503 5-pin Mini- 355R-6503 355RD6503 6-foot Cable 356A-653 356AD653 6-foot Cable 356R-653 356RD653 356A-6503 356AD6503 5-pin Mini- 356R-6503 356RD6503 6-foot Cable 357A-653 357AD653 6-foot Cable 357R-653 357RD653 357A-6503 357AD6503 5-pin Mini- 357R-6503 357RD6503 6-foot Cable 355A-657 355AD657 4-pin Mini- 355A-6507 355AD6507 6-foot Cable 356A-657 356AD657 4-pin Mini- 356A-6507 356AD6507 6-foot Cable 357A-657 357AD657 4-pin Mini- 357A-6507 357AD6507 Infrared 6-foot Cable 555A-653 555AD653 6-foot Cable 555R-653 555RD653 555A-6503 555AD6503 5-pin Mini- 555R-6503 555RD6503 6-foot Cable 555A-657 555AD657 4-pin Mini- 555A-6507 555AD6507 Ranges based on 3-inch retroreflector for reflex sensors, 90% reflectance white card for diffuse reflective sensors. See Excess Gain graphs on Page 4. Polarized sensors may not operate with retroreflective tape. Test selected tape before installation. Ranges using standard 0.5-inch diameter fiber optic cable. Fast turn product with typical one business day lead-time to shipment. Stocked product, typical order quantities guaranteed in stock. See listing of compatible connector cables on Page 4. Relay output option for AC/ Models only (built-to-order, contact factory for delivery lead times). For a 3 Amp, SPDT relay output replace A in Catalog Number with R. (AC/ Models only not available in ).
August 007 4 Excess Gain RANGE (m) 0.3 0.03 3.0 30.5 000 RANGE (mm) 5.5 54 540 000 00 0 00 0 0. 0 00 RANGE (feet). 55A detectors using 55A sources. 56A detectors using 55A sources 0. 0 00 RANGE (inches) Diffuse Reflective (90% reflective white card). 357A. 356A 3. 355A 3 RANGE (m) 0.3 0.03 3.0 30.5 000 RANGE (mm) 5.5 54 540 000 00 0 00 0 0. 0 00 RANGE (feet) Reflex (3-inch diameter retroreflector). 455A. 456A 0. 0 00 RANGE (inches) Fiber Optic (standard 0.5-inch diameter fiber optic cable shown). mode. Diffuse reflective mode (90% reflective white card) Model Selection Compatible Cables Standard Cables Mini Style Mini Style Straight Female Style Number of Pins Gauge Length Catalog Number Pin Configuration/Wire Colors (Face View Female Shown) -pin 6 AWG 6 feet (m) CSMSDCY60 -White -Black Current Rating @ 600V 3-pin: 3A For a full selection of connector cables, see PG.05.05.T.E. Stocked product, typical order quantities guaranteed in stock. 3-pin 6 AWG 6 feet (m) CSMS3F3CY60 4-pin 6 AWG 6 feet (m) CSMS4A4CY60 5-pin 6 AWG 6 feet (m) CSMS5A5CY60 -Green -Black 3-White -Black -White 3-Red 4-Green -White -Red 3-Green 4-Orange 5-Black
5 August 007 Model Selection Accessories Description Catalog Number Approximate Dimensions in Inches (mm) Except Where Noted Allows sensor to replace Photoswitch 5000 Series terminal base and 60-785 normal duty bracket 650A-650 NOTE: Dimensions in Inches Allows sensor to replace Photoswitch 5000 Series cable base and 60-785 normal duty bracket 650A-6503 0.30 (7.6) C A B.00 (5.4) Typ..65 (67.3).8 (30.0).00 (50.8) Allows sensor to replace Photoswitch 4000 Series selfcontained models and 60-749 bracket 650A-6504 0.50 (.7) 0.8 (5.5) Thickness: GA 0.8 (7.) Typ. Catalog Number 650A-6503 650A-6504 Dimensions in Inches (mm) A B C 4.45 (3.0) 5.64 (43.3).83 (7.9) 4.04 (0.6).09 (7.7).5 (54.6) Allows sensor to replace Banner Multibeam, (all models) and SMB700 bracket 650A-6505 NOTE: Dimensions in Inches s s and retroreflective tape See PG.05E.7.T.E Cables Lens Protector For use with connector version sensors Lens protector kit. Clear glass cover fits snugly over the sensor lens to protect it from damage. Ideal for environments in which damage to the lens is likely. Not recommended for use with diffuse reflective sensors. See PG.05.05.T.E 450B-750 Stocked product, typical order quantities guaranteed in stock.
August 007 6 Wiring Diagrams (Pin numbers are for reference only, rely on pin location when wiring) Models Cable Models Mini- Models (Face View Male Shown) 5V AC or 30V AC L L L L Detector BK L L L L 0 64V AC or 5 30V Standard Output BK L or L or +V L or L or +V RD BK YL L or N.O. Out Relay COM N.C. Out L or +V L or +V N.O. Out N.C. Out L or Relay COM 0 30V RD BK +V +V All others RD +V GN WH BK +V
7 August 007 Specifications All Other Models 5V AC Models 30V AC Models 0 30V Models AC/ Models 0 30V Models Input 90 3V AC, 60 Hz 00 3V AC, 50 Hz 80 64V AC, 60 Hz 00 64V AC, 50 Hz 0 30V, 35 ma 0 64V AC, 50/60 Hz or 5 30V 0 30V, 35 ma Power Dissipation W W W W W - to +58 F (-30 to +70 C) -40 to +58 F (-40 to +70 C) Temperature Output: VMOS, 50 ma maximum resistive or relayload; Off-Stage leakage is 0. ma maximum Response Times Short Circuit Protection Dark-to-Light: 5 ms Light-to-Dark: ms Sink/source/TTL, open collector transistor, 50 ma maximum load current Standard Versions: VMOS, 300 ma max./npn, 300 ma max. Versions: 3A SPDT relay 0 ms ms Sensor will turn off immediately when a short or overload is detected (indicator LED will flash). Turn power OFF and back ON to reset. IMPORTANT: During installation, correct power connections must be made first to ensure fail-safe short circuit protection of the outputs. NPN: 50 ma max.,.8v drop max. PNP: 00 ma max.,.6v drop max. (not TTL compatible) Optional Relay Models: SPDT 3A contact Sensor will turn off immediately when a short or overload is detected (indicator LED will flash). Sensor will reset when short is removed. Sunlight Immunity 00 foot models: 6,000 foot-candles All other models: 0,000 foot-candles Humidity 95% relative humidity, non-condensing Case Material Noryl (avoid exposing to chlorinated, halogenated, or aromatic hydrocarbons) Lens Material Nylon Vibration 5g or 0.06 inch displacement, whichever is less, over 0 Hz to khz (relay models: 0g over 0 55 Hz) Shock 40g for 0 ms and 500g for ms, / sine wave pulse (0g for relay models) Enclosure Ratings NEMA, 3, 4, 6, and 3 NOTE: Our products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications. If you have questions about a specific application, contact Eaton s Cutler-Hammer Sensor Applications Department at -800-46-984. Approximate Dimensions in Inches (mm) Sensors 360 Rotation Fiber Optic Models Top View.4 (35.8) Front View 0.6 (4.).36 (34.5) 0 0 0.40 (0.) 0 0.0 (5.9) 0.40 (0.).5 (54.6) 3.9 (8.0).05 (5.) Beam Status LED 0.55 (4) 0.3 (5.8).8 (30).64 (4.7).6 (4.) 0.0 (5.) DIA, PL (#0 Clearance Hole) /-4 NPT