PRODUCTS FOR BETTER LIFTING LD-20 s e c i v e D g Liftin
TABLE OF CONTENTS Lifting Beams Economical Adjustable Spreader/Lifting Beam (ASLB1)... Adjustable Lifting Beam (ALB17)... Fixed Spread Lifting Beam (FSLB19)... 5 Basket Sling Lifting Beam (BSLB1)... 5 Industrial Low Headroom Multiple Spread Lifting Beam (LHLB20)..., 7 Heavy Duty Twin Basket Sling Lifting Beam (HDLB22)... Twin Hoist Lifting Beam (THLB25)... 9 Spreader Fixed Spreader Beam (FSB0)... Adjustable Spreader Beam (ASB2)...11 Modular Spreader Beam (MSB1)... Coil Lifter Dixon Coil Hook with Pivoting Wedge (DCH0)...1 Heavy Duty Coil Hook (HDCH2)...1 Fork Lift Accessories Booms Fixed Fork Lift Booms (FFLB)... 2 Single Fork Hook (SFH)... 2 Telescoping Fork Lift Booms (TFLB)... 2 Double Fork Beam (DFB)... 2 Pivoting Fork Lift Booms (PFLB)... 25 Specialty Products Fiberglass Battery Lifting Beam (BLB)... 2 Battery Lifting Beam, Low Headroom (BLBLHA)... 27 Adjust-A-Link... 2 Adjust-A-Leg... 29 Gantry Cranes Fixed Steel (H90)...0, 1 Adjustable Steel (K90)... 2, Fixed Aluminum (HA90)... Adjustable Aluminum (KA90)... 5 Construction Tools Beam/Girder Clamps Beam Flange Clamp (BFC)...1 Girder Clamp (GC)...1 Beam Grab (F)...15 Pipe & Manhole Lifting Pipe Grab (C/S)... 1 Pipe Tongs (PLT)... 17 Concrete Manhole Lifter (MHL)... 1 Manhole Sleeve Lifter (MCL)... 19 Tea Cup Pipe Carrier (TC)... 20 Tea Cup Sling (TCS)... 20 Pipe Pick (CPP)... 21 Barrier Grab (BRG7)... 22 2
PRODUCT INFORMATION Quality Engineered Products All of the products in this catalog have been engineered and produced to the highest quality standards and meet or exceed all applicable U.S. government standards including OSHA and ASME B0.20 AND B0.9. Random proof testing is standard. Proof testing with certification is available upon request for a nominal charge. Product Overview Lifting Beams Allow for multiple pick points of the load for balance or support issues. Spreader Beams have a top rigging that add stability to the lift. Available in 9 standard styles. Coil Lifters Use to lift, manipulate and reposition coils. Requires minimum aisle space equal to Lifter arm length. Available in 2 standard styles. Beam/Girder Clamps For use in lifting and positioning structural beams. Two styles may also be hung from load bearing beams to suspend hoists or other lifting devices. Gantry Cranes These portable cranes allow for the pick up and transport of a load wherever you have a smooth and level floor. Available in either steel or aluminum, fixed or adjustable height. Pipe & Manhole Lifting For the lifting and positioning of steel, iron and concrete pipes. Pipe Grabs are for metal pipes. Pipe Picks and Tea Cups for concrete pipes. Forklift Accessories Three styles of booms and two hook devices provide added lifting capabilities to your forklift trucks. Barrier Grabs Scissor style grab is the easy way to lift and move concrete road barriers. Auto-latch for hands-off operation. Specialty Products Battery Beams provide a nonconductive lifting method for industrial batteries. (i.e.-forklift batteries) Adjust-A-Leg slings allow controlled lifting of loads where lift points are not equidistant from the load s center of gravity.
ECONOMICAL LIFTING BEAMS Adjustable Spreader/Lifting Beam (ASLB1) Use for 2, or point lifting or as spreader beam (add top rigging) Adjustable lifting points Good for unbalanced loads Low headroom Shackles included " spread adjustments " bail adjustments OPTIONS Pair of swivel hooks - Code S* Top chain rigging - Code C * Bolt Style Anchor Bail Spread (Ft.) Shackles Adj. Max. Min. Top Bottom Headroom Weight 1/ ASLB.5 1 1 1 1/2 1 1/2 7.1 7 1/2 ASLB1 2 1 1/2 1 1/2 9.9 7 1 ASLB2 2 1 1/2 1 1/2 9.9 7 2 ASLB 2 1/ 2. ASLB 2 / / 1. 270 5 ASLB 5 0 1/2 / 20.2 5 7 ASLB1 1/2 1/2 2. 755 Adjustable Lifting Beam (ALB17) Adjust bail for unbalanced load " spread adjustments Shackles included OPTIONS Pair of swivel hooks - Code S* Bail Adjustment for Unbalanced Loads * Spread (Ft.) Bail Adj. Max. Min. Range D Bail Dimensions A B C T Headroom Weight 1 1/ ALB2.5 2 1.5 5. 1.7 150 2 ALB 2 1.5 5. 1.7 155 ALB.5 2 7.75 19. 25 Lift Point Adjustment for Load Length * For Optional Swivel Hooks, add an S to part No. Contact Lift-All for added cost.
Fixed Spread Lifting Beam (FSLB19) ECONOMICAL LIFTING BEAMS 1/2 FSLB1x FSLB1x FSLB1x FSLB1x Spread (Ft.) Bail Dimensions A B C H A.75 B.0 C 5.0 H.9 Headroom 1 1/ 1 1/ 1 1/ 1 1/ Weight 9 5 95 Fixed spread lifting Eye hooks with latches Sealed construction for cleaner beam 1 FSLB2x FSLB2x FSLB2x FSLB2x A 1.0 B.0 C 5.0 H.9 1 1/ 1 1/ 15 1/ 15 1/ 0 75 0 117 2 FSLBx FSLBx FSLBx FSLBx A 1.0 B.0 C 5.0 H 1.0 1 / 17 / 19 / 19 / 5 9 11 1 FSLBx FSLBx FSLBx FSLBx A 1.5 B.0 C 7.0 H 1.0 21 2 2 2 7 1 17 2 Basket Sling Lifting Beam (BSLB1) Spread (Ft.) Bail Dimensions A B C T Headroom Weight 1/2 BSLB1x BSLB1x BSLB1x BSLB1x BSLB1x BSLB1x A. B.0 C 5.0 T.75 1/2 1/2 1/2 1/2 1/2 9 1/2 0 7 95 11 171 Best beam for low headroom applications Fixed spread lifting Bent bar hooks allow for 2" wide sling eyes - One set for ' & ' spreads - Two sets for ' - ' spreads Spread 2 is 1/2 of Spread 1 1 2 BSLB2x BSLB2x BSLB2x BSLB2x BSLB2x BSLB2x BSLBx BSLBx BSLBx BSLBx BSLBx BSLBx A. B.0 C 5.0 T.75 A. B.0 C 5.0 T.75 1/2 1/2 9 1/2 1/2 1/2 11 1/2 9 1/2 1/2 1/2 11 1/2 1/2 1 1/2 0 9 1 175 29 52 75 19 19 2 2 5 BSLBx BSLBx BSLBx BSLBx BSLBx BSLBx A 2.0 B.0 C 7.0 T 1.25 1 1/2 1 1/2 15 1/2 1 1/2 17 1/2 19 1/2 15 211 2 1 5
INDUSTRIAL LIFTING BEAMS Low Headroom Multiple Spread Lifting Beam (LHLB20) Great for low headroom applications Swivel hooks with latches standard ' & ' beams have 2 spreads ' & longer beams have spreads (Inner spread lengths are shorter than outer spreads by 1' increments Additional or repositioned holes available Spread (Ft.) Bail Dimensions A B C T H Headroom Weight 1/2 LHLB1x LHLB1x LHLB1x LHLB1x LHLB1x LHLB1x LHLB1x1 LHLB1x1 LHLB1x1 LHLB1x20 1 1 1 20 A. B.0 C 5.0 T.75 H. / / / / 1 11/1 1 11/1 1 11/1 1 11/1 1 11/1 1 11/1 0 50 70 95 15 15 200 25 290 0 1 LHLB2x LHLB2x LHLB2x LHLB2x LHLB2x LHLB2x LHLB2x1 LHLB2x1 LHLB2x1 LHLB2x20 1 1 1 20 A. B.0 C 5.0 T.75 H. / / 1 11/1 1 11/1 1 11/1 1 11/1 15 11/1 15 11/1 1 11/1 1 11/1 0 50 90 0 170 200 20 05 55 2 LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx1 LHLBx1 LHLBx1 LHLBx20 1 1 1 20 A. B.0 C 5.0 T.75 H. 1 11/1 1 11/1 1 11/1 15 11/1 1 11/1 1 11/1 20 20 22 22 55 70 1 170 25 25 75 20 05 0
Low Headroom Multiple Spread Lifting Beam (Continued) Options: Extra Holes Allows for extra hook positions in addition to the standard holes. Specify number and spread. FasPins Allows for easy repositioning of hooks. Recommended for frequent hook position changes. Extra Hooks Allows for multiple pick points. Saves time from having to move hooks. Spread (Ft.) Bail Dimensions A B C T H Headroom Weight LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx1 LHLBx1 LHLBx1 LHLBx20 1 1 1 20 A 1.25 B.0 C 5.0 T 1.0 H 1.0 15 / 15 / 1 / 17 1/ 1 1/ 20 1/ 20 1/ 20 1/ 20 1/ 22 1/ 70 5 15 205 20 95 50 20 915 5 LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx LHLBx1 LHLBx1 LHLBx1 LHLBx20 1 1 1 20 A 2.0 B.0 C 7.0 T 1.25 H 1.9 19 9/1 20 1/2 21 1/2 2 1/2 2 1/2 25 1/2 25 1/2 25 1/2 0 1/2 0 1/2 0 1 2 20 0 575 90 770 10 1500 7 1/2 LHLB15x LHLB15x LHLB15x LHLB15x LHLB15x LHLB15x A 2.0 B.0 C 7.0 T 1.25 H 1.5 20 1/2 2 / 25 / 27 1/ 27 1/ 27 1/ 5 175 270 20 505 55 LHLB20x LHLB20x LHLB20x LHLB20x LHLB20x LHLB20x A 2.0 B.0 C 7.0 T 1.25 H 1.5 2 1/2 25 / 27 1/ 27 1/ 0 0 115 2 0 20 775 9 7
INDUSTRIAL LIFTING BEAMS Heavy Duty Twin Basket Sling Lifting Beam (HDLB22) For use with slings in a basket hitch Latch hooks designed to minimize sling eye damage Two sets of fixed hooks are standard for all lengths over ' Inner spread is 1/2 of outer spread Extra spreads available upon request 1/2 1 HDLB1x HDLB1x HDLB1x HDLB1x HDLB1x HDLB1x HDLB2x HDLB2x HDLB2x HDLB2x HDLB2x HDLB2x Spread (Ft.) Bail / Hook Dimensions A B C T H A. B.0 C 5.0 T.75 H 1.0 A. B.0 C 5.0 T.75 H 1. Headroom 1/2 1/2 1/2 1/2 9 1/2 9 1/2 1/2 1/2 9 1/2 1/2 1/2 11 1/2 Weight 50 5 1 150 200 220 50 5 15 2 20 290 2 HDLBx HDLBx HDLBx HDLBx HDLBx HDLBx A. B.0 C 5.0 T.75 H 1. 9 1/2 1/2 1/2 11 1/2 1/2 1 1/2 70 90 10 225 00 75 5 HDLBx HDLBx HDLBx HDLBx HDLBx HDLBx A 2.0 B.0 C 7.0 T 1.0 H 1. 1 1/2 1 1/2 15 1/2 1 1/2 1 1/2 1 1/2 90 10 275 50 50 500 7 1/2 HDLB15x HDLB15x HDLB15x HDLB15x HDLB15x HDLB15x A 2.0 B.0 C 7.0 T 1.25 H 1.75 1 1/2 15 1/2 1 1/2 17 1/2 17 1/2 19 1/2 155 10 0 500 700 HDLB20x HDLB20x HDLB20x HDLB20x HDLB20x HDLB20x A 2.0 B.0 C 7.0 T 1.25 H 1.75 15 1/2 1 1/2 17 1/2 19 1/2 19 1/2 19 1/2 150 200 20 500 25 700
INDUSTRIAL LIFTING BEAMS Twin Hoist Lifting Beam (THLB25) For use with two hoists to increase lift capacity Swivel hook with latch standard Center hook offset to accommodate hoists of unequal capacities. Custom pick points for both top and bottom. Center bail and extra pair of hooks for maximum versatility. Spread (Ft.) Bail / Hook Dimensions A B C T H Headroom Weight 2 THLBx THLBx THLBx THLBx THLBx1 THLBx1 1 1 A 1.5 B.0 C 5.0 T. H 1. 1 / 1 / 17 / 17 / 1 / 1 / 5 10 20 20 0 00 2 THLBx THLBx THLBx THLBx THLBx1 THLBx1 1 1 A 1.5 B.0 C 5.0 T. H 1.5 20 21 22 2 2 25 10 20 500 725 THLBx THLBx THLBx THLBX THLBx1 THLBx1 1 1 A 1.5 B.0 C 5.0 T.75 H 2.0 27 1/2 2 1/2 2 1/2 0 1/2 0 1/2 0 1/2 220 00 0 550 0 70 THLB20x THLB20x THLB20x THLB20x THLB20x1 THLB20x1 1 1 A 2.0 B.0 C 7.0 T 1.0 H 2.25 29 29 2 2 2 2 0 20 00 920 10 20 15 THLB0x THLB0x THLB0x THLB0x1 THLB0x1 1 1 A 2.0 B.0 C 7.0 T 1.25 H 2.25 1/ 1/ 1/ 1 1/ 1 1/ 70 5 50 190 215 20 THLB0x THLB0x THLB0x THLB0x1 THLB0x1 1 1 A 2.0 B.0 C 7.0 T 1.25 H.0 5 1/2 1/2 1/2 1/2 1/2 0 110 192 219 9
Fixed Spreader Beam (FSB0) SPREADER BEAMS Adds stability to lift where headroom is not limited Chain rigging standard, wire rope rigging available * Spread (Ft.) Bail / Hook Dimensions A B C H Headroom Weight With Chain With Wire Rope 2 FSBx FSBx FSBx FSBx FSBx FSBx1 FSBx20 FSBx2 1 20 2 A.5 B 2.5 C 5.0 H.97 5 70 2 12 15 55 72 9 111 1 2 7 519 59 75 9 1 1 25 50 5 FSBx FSBx FSBx FSBx FSBx FSBx1 FSBx20 FSBx2 1 20 2 A 1.0 B.5 C 7.0 H 1.0 7 9 1 7 1 1 15 115 15 11 12 27 07 551 791 1 15 17 19 251 9 5 71 FSB20x FSB20x FSB20x FSB20x FSB20x FSB20x1 FSB20x20 FSB20x2 1 20 2 A 1.25 B. C.75 H 1.5 1 5 77 11 1 1 1 222 2 02 71 5 70 11 21 25 297 27 91 5 705 9 * Add a "W" for Wire Rope RIgging Add an "A" for Adjust-A-Link Rigging
Adjustable Spreader Beam (ASB2) SPREADER BEAMS Great versatility and stability where headroom is not limited Chain rigging standard, wire rope rigging available Telescoping spread adjusts in 1 in. increments Headroom Spread * Spread (Ft.) Bail / Hook Dimensions A B C H Headroom Weight With Chain With Wire Rope 2 ASBx- ASBx- ASBx-1 ASBx-20 to to to 1 to 20 A.5 B 2. C.9 H.97 /57 72/ 9/11 12/1 79 9 192 2 1 9 190 2 5 ASBx- ASBx- ASBx-1 ASBx-20 to to to 1 to 20 A 1.0 B.9 C 7.09 H 1.1 55/ 79/95 2/ 1/172 19 207 2 752 1 205 257 727 ASB20x- ASB20x- ASB20x-1 ASB20x-20 to to to 1 to 20 A 1.25 B 5.51 C. H 1.7 0/9 7/111 /12 1/1 1 2 5 79 175 25 559 79 15 ASB0x- ASB0x- ASB0x-1 ASB0x-20 to to to 1 to 20 A 1.5 B 5.25 C.5 H 2.22 /72 7/ 111/15 17/10 2 7 2 9 2 51 71 91 * Add a "W" for Wire Rope RIgging 11
Modular Spreader Beam (MSB1) SPREADER BEAMS Designed to accommodate spreads from ' to 22' Capacities in 1 and 2 tons Lightweight Faspin with lanyard allows for quick adjustment of spread in 1' increments Hair pin cotter to rigging attachment Designed and manufactured to ASME standards Outer Tube Inner Tube - each system contains (2) Lifting Eye Dimensions Short Tube Spread (Ft.) Min/Max at Min. Spread at Max. Spread A B C Hook Opening With Latch 1 MSB2 /22 15. 150.7 0.5 2.5 5 0.97 195 2 MSB /22 15. 150.7 1.75 0.97 275 Recommended Optional Top Rigging (Add "R" to Part Number) 2 Sets of 2-Leg Tuflex Roundslings per Beam Spreader For Spreader Lengths Rigging MSB2 ' - 1' 1' - 22' DO-EN0 x 11'" DO-EN0 x 1' MSB ' - 1' 1' - 22' DO-EN0 x 11'" DO-EN0 x 1'
COIL LIFTERS Dixon Coil Hook with Pivoting Wedge (DCH0) For easy upending of coils from horizontal to vertical Pivoting wedge great for lifting coils that have been stacked Wedge also acts as a coil retainer Excels in use with small, lightweight coils Good for limited overhead clearance Standard handle for easier coil positioning Heavy Duty Coil Hook (HDCH2) Max. Coil Width Max. Radial Min. ID Bail Dimensions A B C T 1/2 DCH1x 1 9.1 2..5 20 1/2 DCH1x 1 1.1 2..5 2 1 DCH2x 1.1 2..5 2 2 DCHx 1 1/2 1 2..75 2 1/2 DCH7x 20 1 1/2 1.1. 5. 1 0 Headroom Throat Designed for heavy duty applications High tensile alloy steel plate reduces physical size and weight Counter balanced to hang level when empty Inside radius on hooks avoid coil edge contact Guide handles for ease of hook positioning Handles a wide range of coil widths Available with optional padding for additional coil protection Coil Width 5 7-1/2 15 20 Coil Width Max/Min Throat HR Headroom Bail Dimensions A B C T HDCHx /2 2 7-/ 1-1/2 7 1-1/ 20 HDCHx /0 2 1-1/2 7 1-1/ 5 HDCHx0 0/ 2-1/2 1-1/2 7 1-1/ 0 HDCH15x /2 2 7-1/2 1-1/2 7 1-1/2 15 HDCH15x /0 2-1/ 1-1/2 7 1-1/2 77 HDCH15x0 0/ 2 9 1-1/2 7 1-1/2 92 HDCH20x /0 2 1-1/ 2 5 9 1-/ 92 HDCH20x0 0/ 2 1-/ 2 5 9 1-/ 95 HDCH20x72 72/2 2 2-1/2 2 5 9 1-/ 11 HDCH0x /0 0 7-7/ 2 5 9 1-/ 150 HDCH0x0 0/ 0 2 5 9 1-/ 12 HDCH0x72 72/2 0 -/ 2 5 9 1-/ 2227 HDCH0x0 0/ 0 52-1/ 2-1/ 2 2175 HDCH0x72 72/2 0 52-5/1 2-1/ 2 225 1
CONSTRUCTION TOOLS Beam Flange Clamp (BFC) Great for the lifting of or suspension from I-Beams P Light weight, portable design Jaw opening adjusts to a wide range of beam types and flange widths Built in suspension pin for minimum headroom Opposing thread screw spindles for rapid operation Large Bail option available for large crane hooks W H B Large Bail Option Flange Width (W) Suspension Pin Dia. (P) Hook Clearance Large Bail Opening Min. Max. (H) H B H 1 BFC1 7 1/2 7/ 2 1/.5 2.0 2 1/2 BFC2 1/2 7 1/2 7/ 2 1/.5 2.0 9 5 BFC5 1 / 2 1/.0 2.5 1 Girder Clamp (GC) Designed for the lifting of or suspension from large girders and I-Beams Heavy duty design for lifting wide range of flange beams and plate girders Screw-spindle design ensures positive grip Opposing thread screw spindles for rapid operation Simple design for minimum maintenance A Flange Width (W) Min. Max. Max. Flange Thickness (T) Shackle Dim. Stock Dia. (A) Inside Dia. (B) 15 GC15 2 1..9 2 20 GC20 2 2.1 5 291 25 GC25 2 2.1 5 0 1
Beam Grab (F) (For vertical lifting only, not suspension) CONSTRUCTION TOOLS Heavy duty design for lifting wide flange beams and plate girders Recessed base accepts studs in beam surface Eliminates need for slings, chokers and spreader bars Part No. Unit Height (H) Flange Width (W) Flange Thickness (T) Min. Max. Min. Max. 1/ 1/ 5 F5 22 / 5 5 1/ / 1/ 1 7 7 1/2 / 1/2 1 15 F15 0 1/ 9 9 1/2 1 1/ 17 1/2 1 1/2 W 25 F25 7/ 11 17 1/ 2 1 17 1 1/ 1 2 1 59 1 1 2.1 20 22 2 5 F5 52.9 2 2 1.75 2 2 1.75 2 1 H T Operation: 1. Lower grab onto beam. 2. Lift arms, if necessary, to slide under beam flange.. As beam is lifted, pressure forces arms together to secure beam.. The heavier the beam, the greater the clamping force. 15
Pipe Grab (C OR S) (For cast iron or steel pipe only) CONSTRUCTION TOOLS Automatically clamps to pipe when lowered onto it Moveable outriggers stabilize the pipe during lift No blocking required Quick and efficient handling of properly balanced pipe Part No. Cast Iron Pipe OD Part No. Steel Pipe OD Height (H) Width (W) Depth (D) Shackle Dim. Dia. B C 50 C.0 S.5 5. 1.0 1. 7 00 C. S.5 1 7. 1.1 1.9 9 00 C.9 S. 17 11 11.5 1.1 1. 15 100 C 9.05 S. 22 1 1.5 1.1 1. 25 Operation: 1. Lower grab onto approximate center of pipe. Grab will open and seat on pipe. 2. Lift slowly to check for pipe balance. Never exceed a 15 angle.. If angle exceeds 15, lower pipe and reposition grab. 1
Pipe Tongs (PLT) (For vertical lifting only, not suspension) CONSTRUCTION TOOLS Pipe Tongs are made of sturdy construction to handle pipe, round bars, castings, etc Tongs are provided with bare steel curved gripping arms Optional replaceable urethane pads available to protect smooth or polished surfaces Load must be balanced and controlled when lifting May be used in pairs with a lifting beam for added stability Adjustable Fixed Specifications - Fixed Diameter Dia. Headroom Min. A B 00 PLTF5 5 15-1/2 0.5 1.1 17 2000 PLTF 2-1/2 0.5 1.1 25 Specifications - Adjustable Diameter Bare Steel Range Min/Max Urethane Pad Range Min/Max Headroom When Lifting Min/Max Dia. Pad Width 00 PLTA 2-1 1/ - 1/ 1. - 11.7 2.25.5 1.1 2000 PLTA - 1/ - 7 1/ 21.0-1.70 5.5 1.1 1 2000 PLTA 7-1/ - 11 1/ 9.71 -.0. 2.2 50 2000 PLTA15-15 9 1/ - 1 1/ 7 -..75 2 7 A B WARNING Decreasing the load by bumping or substantial imbalance can, under certain circumstances loosen the grip. Do not use in diameters other than those specified on nameplate. 17
CONSTRUCTION TOOLS Concrete Manhole Housing Lifter (MHL) Designed for "-" concrete wall thickness Will not damage concrete seat Legs can be quickly positioned to balance load 2 and leg models available Conforms to ASME B0.9 & B0.20 Note: Constant tension required to maintain positive load contact. Description Max. Dia.,000 MHL5 2 Leg Model (2" each) 92.5 11 15,000 MHL7 1/2 Leg Model (2@2", 1@72") 1 11 5,000 MHLC Clamp Only - 5 2 Leg Model Leg Model 1
CONSTRUCTION TOOLS Manhole Sleeve Lifter (MCL) Easy to attach and release from sleeve The quick and easy way to place cast manhole sleeves 2 or leg models available TWO LEG LIFTERS THREE LEG LIFTERS Description 1,000 MCL1/2 2 Leg Model 2 1,500 MCL/ Leg Model (2@1", 1@0") 2 Note: Flange diameter range "-0". 19
Tea Cup Pipe Carrier (TC) CONSTRUCTION TOOLS Efficiently handles concrete water and sewer pipes Three sizes available to lift up to 1 tons Standard hand grip for ease of installation Optional spoon handle available to assist Tea Cup placement (Model TC only) in small diameter pipes Model TC Part No. Dimensions Tea Cup Sling(TCS) A B C D E F G. TC 5 9/1 2 2 1/ 1 1/ / 1 / 1 1/ 9 1 TC10 2 1/2 2 5/ 1 / 5 / 1 / 1 / 1 TC10 1/ 1 5/ 7 5/ 2 / 1 5/ 22 OPERATION 1. Drop TCS Sling down through hole in pipe 2. Align and insert Tea Cup Pipe Carrier onto sling. Lift pipe Tea Cup Spoon Handle (TCSH) (Includes Bolt-on Lip) For use with Tea Cup Carriers 5 ft. standard length Sling Dia. For Use With:.9 TCS / 9 TC. TCS7 7/ 1.5 TCS1 1 19 TCS11 1 1/ TC10 2 1 TCS11 1 1/ 1 TCS1 1 1/2 TC10 52 20
CONSTRUCTION TOOLS Pipe Pick (PP) (For concrete pipe only) Simple and fast No need to reach inside the pipe Worker remains above the pipe at all times Use to easily join length of pipe Part No. Min. Pipe ID Dimensions A B C T D E F G,000 CPP1.5 0.9 1.9 1.1 0. 1.5 2.5.25 17.75,000 CPP 1 0.1 2 2.19 0.75 2 2.5 22.5 1,000 CPP5 1 1.0 2.9 2.75 1 2.75.75 1.75 Tilt handle for easy positioning Lift arm counter-weighted for easy removal 21
Barrier Grab (BRG7) CONSTRUCTION TOOLS Labor saving, quick and easy hands-off operation No slings or chains to attach Reduces damage to barrier due to moving Replaceable polyurethane lifting pads for unpainted barriers Replaceable steel "Dog Point" lifting pads for painted barriers (typical in coastal areas) With Polyurethane Lifting Pads,500 7-1/ 50 1,500 7-7 1/ 505 With Steel "Dog Point" Lifting Pads,500 7-1/D 50 1,500 7-7 1/D 505 The Barrier Grab is designed to handle "-" nominal widths at the barrier top (W) 1. Grab in open position is placed onto barrier. Autolatch will disengage when hoist line becomes slack. 2. Raising crane hook will then cause pads to engage barrier.. Lower barrier into position.. Slack in hoist line will engage auto-latch, holding grab open for removal and placement of next barrier. 22
Fixed Fork Lift Booms (FFLB) FORK LIFT ACCESSORIES Fixed length beam design Restraining chain with grab hook FFLB-15 Single Pick Point Use with 1" or 2" wide web sling Optional swivel hook available FFLB-0 Multiple Pick Points 5 alternate hook positions at 1 foot intervals Fixed or swivel hooks available Max. Headroom Maximum Capacity at Hook Position ' 5' ' 7' ' FFLB-15 1500 7 - - - - 1,500 15 FFLB-0 000.,000,500,000 2,500 2,000 200 Single Fork Hook (SFH) Easy attachment - no tools required Welded construction for durability Promotes versatility of fork lift trucks,000 lb. rated capacity Fixed Hook Swivel Hook Dimensions A B C (Fixed) C (Swivel) D E SFHF SFHS 1/2 2 1/2 11/1 9/1 1 1 7 SFHF5 SFHS5 5 1/2 2 1/2 11/1 9/1 1 1 SFHF SFHS 1/2 2 1/2 11/1 9/1 1 1 9 Note: Fixed hook shown, swivel hook also available. 2
Telescoping Fork Lift Booms (TFLB) Telescoping boom for versatility T-Pin locks boom into position Handle on end for easy extension of boom Swivel hooks with latch are standard Restraining chain with grab hook standard ft. maximum horizontal reach FORK LIFT ACCESSORIES Maximum Capacity at Hook Position '-' 7' ' 9' ' 11' ' TFLB0,000,000 2,00 2,200 1,900 1,00 1,500 0 TFLB0,000,200 2,00 2,200 1,900 1,00 1,500 0 TFLB0,000 5,000,200,500,000 2,700 2,500 90 TFLB0,000 7,000 5,700,00,0,00,0 520 Double Fork Beams (DFB) Easy attachment - no tools required Welded construction for durability Promotes versatility of fork lift trucks Fixed Hook Swivel Hook Capacity A B C D Dimensions F (Fixed) F (Swivel) E O DFBF DFBS,000 20 / 9 1/ 7 5/ 9 / 1 7/1 1 11/2 20 DFBF DFBS,000 2 / 1/ / / 5/ 1 1/1 1 11/1 5 2 Note: Swivel hook shown, fixed hook also available.
Pivoting Fork Lift Booms (PFLB) FORK LIFT ACCESSORIES Vertical adjustability in 5 increments up to 0, ' " maximum height Telescoping boom for versability T-Pin locks boom into position Handle on end for easy extension of boom Swivel hooks with latch are standard Restraining chain with grab hook standard reach Maximum Capacity at Hook Position '-' 7' ' 9' ' 11' ' PFLB0,000,000 2,00 2,200 1,900 1,00 1,500 50 PFLB0,000,200 2,00 2,200 1,900 1,00 1,500 50 PFLB0,000 5,000,200,500,000 2,700 2,500 20 PFLB0,000 7,000 5,700,00,0,00,0 50 25
FORK LIFT ACCESSORIES Fiberglass Battery Lifting Beam (BLB) Non-conductive for lifting industrial size fork lift or similar batteries Up to 70% lighter than other beams Available for single or multiple size batteries Heavy duty capacities of,00 lbs. and 7,000 lbs. Acid resistant coated polyester straps and hooks " standard spread - custom lengths available Swivel hooks standard Fixed Length (BLBF) Part No.* Oblong Size (in.) Dia. B C Headroom (in.),00 BLBF. 29 1 7,000 BLB70F.75 2.75 5.5 0 20 Adjustable (BLBA) Part No.* Oblong Size (in.) Dia. B C Headroom (in.),00 BLBA. 9 17 7,000 BLB70A.75 2.75 5.5 0 1/2 20 Note: Maximum spread range is " * Add a "J" to for Optional J Hooks Optional J Hooks Available in place of swivel hooks 2
Battery Lifting Beam (BLBLHA) Low Headroom, Adjustable Low Headroom, 1." Adjustable to handle batteries of different lengths Non-conductive beam Acid-resistant, coated polyester straps with either swivel or J-hook SPECIALTY BEAMS Capacity Standard Spread 7,000 BLBLHA 5 1 J Hooks Standard Swivel Hooks Available 27
Adjust-A-Link The adjustable, two leg chain sling SPECIALTY SLINGS Chain cannot be removed from the master control plate, assuring the capacity rating will not be compromised Alloy steel master control plate for strength and reliability Each assembly serialized for traceability Complies with OSHA - proof tested and certified Grade 0 chain provides approximately 25% higher capacities than our previous Adjust-A-Links - replaces larger, more expensive slings New angled plate design reduces bending torque on chain and plate - reduces wear and extends sling life Wider top bearing surface reduces wear to both plate and crane hook Versatile - one sling does many jobs Using two Adjust-A-Links on the same crane hook eliminates the need for expensive triples and quads Heat treated alloy steel construction for long sling life Yellow powder coating on master plate and hooks prevents rust extends sling life More compact plate design fits larger hooks for easier rigging Less bulky than typical double adjustable chain slings High visibility yellow fittings make assembly easy to spot Easily adjustable to accommodate a wide range of applications No time wasted searching for just the right sling Never exceed rated capacities. Chain must be seated at the base of adjusting slot of the Master Control Link. Single Double Basket Chain Size 1 Capacity * Single @ 90 Double @ 0 Eye Width A Eye Height B Dimensions (in.) Ft. Length Ft. Length 1 Ft. Length Overall Width C Overall Length D Hook Opening E 7/2 2,700,700 2 /1 2 11/1 15/1 5 1/ 15/1 0001G.2 0002G.2 9/2,00 7,00 2 7/ /1 5 1/1 1/2 1 1/1 000G 7.5 000G.5 /,00 15,200 / 1/ / 11/1 1 9/1 0005G 1.5 000G 2.5 1/2,000 20,00 / / 9 / / 2 0007 2 000 52 Part No. Part No. Part No. 2
Adjust-A-Leg The adjustable, two leg wire rope sling Easily adjust the legs for a level lift of unbalanced and non-symetrical loads Can be locked in place for repetitive lifts Use in pairs for point lifts Can be used as top rigging for spreader beams Great as rigging to move machinery SPECIALTY SLINGS * (Legs @ 5 ) Part No. Std. Reach (Ft.) Rope Dia. Top Assembly Dim. A B C T Hook Size 1 AAL1 5/1 1.1.1 5. 1 7.5 2 AAL2 5/1 1.1.1 5. 1 1/2 20 AAL 7/1 1.1.1 5. 2 AAL 9 9/1 1.75 5.25..1 1/2 7 AAL 9 5/ 1.75 5.25.. 7 90 AAL 9 / 2. 5..75 1.0 11 152 15 AAL15 9 7/ 2. 5..75 1.0 11 175 * Reach should be a length of 70% or greater of the distance between pick up points. Operation: For a level lift, adjust the leg lengths so that the master plate is above the approximate center of gravity. Test position by lifting only until one end of the load is raised. Lower and reposition master plate and legs for another test. Repeat until load raises without tilting. Adjust-A-Leg must be loaded to at least % of rated capacity before legs will fully lock into place. Typical Applications Level lifting of nonsymetrical loads where lift points are not equidistant from center of gravity. Level lifting of symetrical loads where lift points are not equidistant from center of load. Lifting of any load at an angle. 29
GANTRY CRANES Fixed Steel (H90) Balanced design allows for easy rolling, even under load Simple bolt together construction Includes steel swivel casters Easy set-up and maintenance * 1 Height Under Beam (H) in Ft. 1 1 Nominal Span (Ft.) A B C D E Caster Dia. Weight Model No. ' " 11' " 5' ". 25 H90-1-/ ' " 1' " 5' " 90 H90-1-/ 1 1' " 15' " 5' " 97 H90-1-/1 1 1' " 17' " 5' ". 11 H90-1-/1 ' " 11' " ' ". 91 H90-1-/ ' " 1' " ' " 1 H90-1-/ 1 1' " 15' " ' " 55 H90-1-/1 1 1' " 17' " ' ". 2 H90-1-/1 ' " 11' " 7' ". 977 H90-1-1/ ' " 1' " 7' " 2 H90-1-1/ 1 1' " 15' " 7' " 1119 H90-1-1/1 1 1' " 17' " 7' ". H90-1-1/1 ' " 11' " 7' ". 1 H90-1-1/ ' " 1' " 7' " 11 H90-1-1/ 1 1' " 15' " 7' " 2 H90-1-1/1 1 1' " 17' " 7' ". 192 H90-1-1/1 0
* Height Under Beam (H) in Ft. Nominal Span (Ft.) A B C D E Caster Dia. Weight Model No. ' " 11' " 5' " 99 H90-2-/ ' " 1' " 5' " 9 H90-2-/ 1 1' " 15' " 5' ". 111 H90-2-/1 1 1' " 17' " 5' ". 112 H90-2-/1 ' " 11' " ' " 1 H90-2-/ ' " 1' " ' " 7 H90-2-/ 1 1' " 15' " ' ". 2 H90-2-/1 2 1 1' " 17' " ' ". 7 H90-2-/1 ' " 11' " 7' " 11 H90-2-1/ 1 ' " 1' " 7' " 11 H90-2-1/ 1 1' " 15' " 7' ". H90-2-1/1 1 1' " 17' " 7' ". 1 H90-2-1/1 ' " 11' " 7' " 05 H90-2-1/ 1 ' " 1' " 7' " 2 H90-2-1/ 1 1' " 15' " 7' ". 17 H90-2-1/1 1 1' " 17' " 7' ". 1 H90-2-1/1 9' " 11' " 5' ". 17 H90--/ 11' " 1' " 5' ". 1157 H90--/ 1 1' " 15' " 5' ". 0 H90--/1 1 15' " 17' " 5' " 5 127 H90--/1 9' " 11' " ' ". 29 H90--/ 11' " 1' " ' ". 79 H90--/ 1 1' " 15' " ' ". 10 H90--/1 1 15' " 17' " ' " 5 1529 H90--/1 9' " 11' " 7' ". 150 H90--1/ 1 11' " 1' " 7' ". 100 H90--1/ 1 1' " 15' " 7' ". 151 H90--1/1 1 15' " 17' " 7' " 5 170 H90--1/1 9' " 11' " 7' ". 17 H90--1/ 1 11' " 1' " 7' ". 152 H90--1/ 1 1' " 15' " 7' ". 157 H90--1/1 1 15' " 17' " 7' " 5 179 H90--1/1 9' " 11' " 5' " 5 197 H90-5-/ 11' " 1' " 5' " 5 17 H90-5-/ 1 1' " 15' " 5' " 15 5.5 157 H90-5-/1 1 15' " 17' " 5' " 15 5.5 1992 H90-5-/1 9' " 11' " ' " 5 1519 H90-5-/ 11' " 1' " ' " 5 159 H90-5-/ 1 1' " 15' " ' " 15 5.5 159 H90-5-/1 5 1 15' " 17' " ' " 15 5.5 211 H90-5-/1 9' " 11' " 7' " 5 10 H90-5-1/ 1 11' " 1' " 7' " 5 17 H90-5-1/ 1 1' " 15' " 7' " 15 5.5 170 H90-5-1/1 1 15' " 17' " 7' " 15 5.5 225 H90-5-1/1 9' " 11' " 7' " 5 17 H90-5-1/ 1 11' " 1' " 7' " 5 1 H90-5-1/ 1 1' " 15' " 7' " 15 5.5 190 H90-5-1/1 1 15' " 17' " 7' " 15 5.5 25 H90-5-1/1 1
GANTRY CRANES Adjustable Steel (K90) Balanced design allows for easy rolling, even under load Simple bolt together construction Includes steel swivel casters Easy set-up and maintenance Height adjustable in 1 ft. increments * 1 Max. Height Under Beam (H) in Ft. 1 1 Nominal Span (Ft.) A B C D E Caster Dia. Min. Height Under Beam (H) Weight Model No. ' " 11' " 5' ". ' 5" 7 K90-1-/ ' " 1' " 5' " ' 5" 952 K90-1-/ 1 1' " 15' " 5' " ' 5" 99 K90-1-/1 1 1' " 17' " 5' ". ' 5" 115 K90-1-/1 ' " 11' " ' ". 7' 5" 9 K90-1-/ ' " 1' " ' " 7 5" 9 K90-1-/ 1 1' " 15' " ' " 7' 5" K90-1-/1 1 1' " 17' " ' ". 7' 5" 25 K90-1-/1 ' " 11' " 7' ". ' 5" 2 K90-1-1/ ' " 1' " 7' " ' 5" 11 K90-1-1/ 1 1' " 15' " 7' " ' 5" 1170 K90-1-1/1 1 1' " 17' " 7' ". -' 5" 19 K90-1-1/1 ' " 11' " 7' ". ' 5" 112 K90-1-1/ ' " 1' " 7' " ' 5" 7 K90-1-1/ 1 1' " 15' " 7' " ' 5" 7 K90-1-1/1 1 1' " 17' " 7' ". ' 5" 1 K90-1-1/1 2
2 5 Max. Height Under Beam (H) in Ft. 1 1 1 1 1 1 Nominal Span (Ft.) A B C D E Caster Dia. Min. Height Under Beam (H) Weight Model No. ' " 11' " 5' " ' " 971 K90-2-/ ' " 1' " 5' " ' " 0 K90-2-/ 1 1' " 15' " 5' ". ' " 115 K90-2-/1 1 1' " 17' " 5' ". ' " 0 K90-2-/1 ' " 11' " ' " 7' " K90-2-/ ' " 1' " ' " 7' " 15 K90-2-/ 1 1' " 15' " ' ". 7' " 50 K90-2-/1 1 1' " 17' " ' ". 7' " 101 K90-2-/1 ' " 11' " 7' " ' " 1152 K90-2-1/ ' " 1' " 7' " ' " 119 K90-2-1/ 1 1' " 15' " 7' ". ' " 1 K90-2-1/1 1 1' " 17' " 7' ". ' " 15 K90-2-1/1 ' " 11' " 7' " ' " 5 K90-2-1/ ' " 1' " 7' " ' " 9 K90-2-1/ 1 1' " 15' " 7' ". ' " 1 K90-2-1/1 1 1' " 17' " 7' ". ' " 19 K90-2-1/1 9' " 11' " 5' ". ' 11" 115 K90--/ 11' " 1' " 5' ". ' 11" 15 K90--/ 1 1' " 15' " 5' ". ' 11" K90--/1 1 15' " 17' " 5' " 5 ' 11" 15 K90--/1 9' " 11' " ' ". 7' 11" 92 K90--/ 11' " 1' " ' ". 7' 11" 12 K90--/ 1 1' " 15' " ' ". 7' 11" 19 K90--/1 1 15' " 17' " ' " 5 7' 11" 1 K90--/1 9' " 11' " 7' ". ' 11" 11 K90--1/ 11' " 1' " 7' ". ' 11" 1 K90--1/ 1 1' " 15' " 7' ". ' 11" 1517 K90--1/1 1 15' " 17' " 7' " 5 ' 11" 17 K90--1/1 9' " 11' " 7' ". ' 11" 15 K90--1/ 11' " 1' " 7' ". ' 11" 159 K90--1/ 1 1' " 15' " 7' ". ' 11" 1 K90--1/1 1 15' " 17' " 7' " 5 ' 11" 1 K90--1/1 9' " 11' " 5' " 5 7' 155 K90-5-/ 11' " 1' " 5' " 5 7' 1525 K90-5-/ 1 1' " 15' " 5' " 15 5.5 7' 1595 K90-5-/1 1 15' " 17' " 5' " 15 5.5 7' 2050 K90-5-/1 9' " 11' " ' " 5 ' 152 K90-5-/ 11' " 1' " ' " 5 ' 152 K90-5-/ 1 1' " 15' " ' " 15 5.5 ' 1722 K90-5-/1 1 15' " 17' " ' " 15 5.5 ' 2177 K90-5-/1 9' " 11' " 7' " 5 9' 170 K90-5-1/ 11' " 1' " 7' " 5 9' 177 K90-5-1/ 1 1' " 15' " 7' " 15 5.5 9' 1 K90-5-1/1 1 15' " 17' " 7' " 15 5.5 9' 201 K90-5-1/1 9' " 11' " 7' " 5 11' 1 K90-5-1/ 11' " 1' " 7' " 5 11' 190 K90-5-1/ 1 1' " 15' " 7' " 15 5.5 11' 197 K90-5-1/1 1 15' " 17' " 7' " 15 5.5 11' 22 K90-5-1/1
GANTRY CRANES Fixed Aluminum (HA90) Light-weight Aluminum construction Balanced design allows for easy rolling, even under load Simple bolt together construction Includes poly-coated swivel casters Easy set-up and maintenance 1 2 Height Under Beam (H) 7' " 9' 2" ' " 7' " 9' 2" ' " Nominal Span (Ft.) A B C D E Caster Dia. Weight Model No. ' " ' " '. 2 HA90-1-7/ 9 9' ' " ' 2 HA90-1-7/9 11 11' ' " ' 251 HA90-1-7/11 ' " ' " 5'. 2 HA90-1-9/ 9 9' ' " 5' 20 HA90-1-9/9 11 11' ' " 5' 27 HA90-1-9/11 ' " ' " '. 25 HA90-1-/ 9 9' ' " ' 2 HA90-1-/9 11 11' ' " ' 297 HA90-1-/11 ' " ' " ' 51 HA90-2-7/ ' " ' " '. 0 HA90-2-7/ ' " ' " '. 29 HA90-2-7/ ' " ' " 5' 71 HA90-2-9/ ' " ' " 5'. 2 HA90-2-9/ ' " ' " 5'. 9 HA90-2-9/ ' " ' " ' 01 HA90-2-/ ' " ' " '. 5 HA90-2-/ ' " ' " '. 79 HA90-2-/
Adjustable Aluminum (KA90) GANTRY CRANES Light-weight Aluminum construction Balanced design allows for easy rolling, even under load Simple bolt together construction Includes poly-coated swivel casters Easy set-up and maintenance Height adjustable in in. increments 1 2 Max. Height Under Beam (H) 7' " 9' 2" ' " ' " 7' " 9' 2" ' " ' " Nominal Span (Ft.) A B C D E Caster Dia. Min. Height Under Beam (H) Weight Model No. ' 7" ' " '. 5' " 50 KA90-1-7/ ' 9" ' " ' 5' " 75 KA90-1-7/ ' 9" ' " ' 5' " 90 KA90-1-7/ ' 7" ' " 5'. ' 2" 0 KA90-1-9/ ' 9" ' " 5' ' 2" 5 KA90-1-9/ ' 9" ' " 5' ' 2" 00 KA90-1-9/ ' 7" ' " '. 7' " 5 KA90-1-/ ' 9" ' " ' 7' " KA90-1-/ ' 9" ' " ' 7' " 25 KA90-1-/ ' 7" ' " ' ". 9' " 15 KA90-1-/ ' 9" ' " ' " 9' " 0 KA90-1-/ ' 9" ' " ' " 9' " 55 KA90-1-/ ' ' " ' 5' " 0 KA90-2-7/ ' 2" ' " '. 5' " 500 KA90-2-7/ ' " ' " '. 5' " 525 KA90-2-7/ ' ' " 5' ' 2" 5 KA90-2-9/ ' 2" ' " 5'. ' 2" 525 KA90-2-9/ ' " ' " 5'. ' 2" 550 KA90-2-9/ ' ' " ' 7' " 520 KA90-2-/ ' 2" ' " '. 7' " 50 KA90-2-/ ' " ' " '. 7' " 55 KA90-2-/ ' ' 2" ' " 9' " 50 KA90-2-/ ' 2" ' " ' ". 9' " 570 KA90-2-/ ' " ' " ' ". 9' " 595 KA90-2-/ 5
LIFTING DEVICES RETURN POLICY 1. Items to be returned MUST BE UNUSED and in like new condition. 2. An RGA number must be obtained from our Customer Service Agents. No unauthorized returns will be accepted.. Freight for returns must be prepaid by the customer to the location designated by our Customer Service Agents.. Requests for returns must be made within 0 days of the original shipment date. 5. A 25% restocking charge will apply to all authorized returns.. Credit will be issued after receipt, inspection and acceptance. 7. Custom ordered or modified items may not be returned. Manufacturing and Warehousing in: Atlanta Chicago Houston Las Vegas Headquarters, Customer Service & Manufacturing: 1909 McFarland Dr. Landisville, PA 175-1 00-909-19 FAX: 717-9-15 E-Mail: lift-all@lift-all.com Customer Service: customerservice@lift-all.com www.lift-all.com Cat. LD-20 Integra M 1