100 7 00 arwick c. 3 17 56 Ø100 9 200 56 200 Y EQUIP. SUPPLIER 500 ERED SLUDGE DIGESION NK No.1 60 60 X 69 650 3 17 500 50 Ø100 651 152 CON. ON D-170 GROU RING 6 x 50 (YP.2) ERED SLUDG2 DIGESION NK No.2 Y EQUIP. SUPPLIER Engineered Pipe and Fittings Stainless Steel and Carbon Steel Catalog CE-201 Rev. 1
able of Contents inc. Overview...1-1 I.D. SM 77 & 77 Suary of Specification...2-1 Pipe...2-3 90 Elbows...2-5 Elbows...2-5 Mitred Elbows...2-6 Reduceurs...2- ees...2-9 Cross...2-9 Laterals...2-10 Wyes...2-11 Pressed Collars...2-12 ngle Collars...2-13 Stub-Ends ype '' ''...2-1 acking Flanges...2-15 Slip-on acking Flanges...2-16 lind Flanges...2-17 SM 77 & 77 Suary of Specification...3-1 Pipe...3-3 90 Elbows...3-5 Elbows...3-5 Mitred Elbows...3-6 Reduceurs...3- ees...3-9 Cross...3-9 Laterals...3-10 Wyes...3-11 Pressed Collars...3-12 ngle Collars...3-13 acking Flanges...3-1 Slip-on acking Flanges...3-15 lind Flanges...3-16 SM/SME /S-312, /S-03, /S-105 (galv) & /S12 Suary of Specification...-1 Pipe...-3 90 Elbows...- 5 Elbows...-5 ees......-7 Reducters........- Cap...........-9 Stub-end...-10 SM/SME /S-312, /S-03, /S-105 (galv) & /S12 (con t) Coupling.........-11 Lap-joint Flanges Class 150 galvanised...-12 Lap-joint Flanges Class 300 galvanised...-13 Flanges Class 150, Stainless Steel...-15 Flanges Class 300, Stainless Steel...-17 Flanges...-1 SM/SME /S-53, /S-106, /S-23 & /S105. Suary of Specification...5-1 Pipe...5-3 90 Elbows...5-5 Elbows...5-5 Long Radius 10 Returns....5-6 Short Radius 10 Returns....5-7 Reduceur......5- ee........5-10 Cap........5-12 Coupling...... 5-13 Flanges Class 150....... 5-1 Flanges Class 300...5-16 ccessories Manways...6-1 Quick Opening Clean-Outs...6-2 Grooved Style Clean-Outs...6-3 Diamond Clean-Outs...6- Cut and Roller Groove daptor...6-5 Metal to Metal flanges...6-6 Pipe Hangers...6-7 Spacers...6- echnical Section I.D Maximum Working Pressure... 7-1 Maximum Working Pressure... 7-2 Collars & Flanges Maximum Working Pressure...7-3 Reinforcement for Vaccum Condition...7- Maximum Unsupported Span able... 7-5 Pipe & Fittings olerance...7-6 Spooling Fabrication olerance...7-7 arwick c.
Overview Welcome to c. s a result of the merger between rothers and Henderson arwick in 2000 c. has become a leader in the manufacture of stainless steel pipe and fittings. c. boasts more than a century of growth and expertise in the fabrication of stainless steel metal products. Products c. stands at the North merican forefront in terms of standards, diversity and product range. Items listed in this standard products catalogue are coonly kept in stock in grades 30L & 316L and in the thicknesses coon to the North merican market. c. s expertise extends far beyond standard products. It also includes the fabrication of piping products that meet our customers special needs in terms of size, thickness and special alloys such as 317L, 90L, 25SMO, Duplex, Monel, conel, etc. Specifications include SM 312, 03, 77 and 77 with larger diameter pipe manufactured in single random 20 ft lengths. Our pipe and fittings are acid pickled to conform with specification SM 30. Upon request our stainless steel products may include NSF 61 and 372 certification. Drawing c. can provide isometric drawings per customer's specifications at a low cost, using both CDPIPE and UOCD software. his service allows our customer better planning of priorities and improves production lead-time. Shop sketches are also prepared for every spool assembly, facilitating assembly operations and eliminating most errors that could otherwise take place. Spooling / Fabrication c. also offers shop spooling of pipelines in accordance with drawings and specifications. his is, by far, more economical than field assembly and assures a timely supply and quality of workmanship. When c. supplies spooling, several additional cost savings are achieved: - Scrap reduction. - Site inventory control - Re-stocking charges & transportation of surplus material in both directions. We also offer our expertise in the following areas: - SME 31.1 & 31.3 - SME pressure vessel. - Cotton ball finish. - Capacity for major projects. - Storage tanks. -Custom made pieces manufactured to our customer's specifications. Quality ssurance t c., we value product quality and customer satisfaction. Our technicians design quality assurance procedures and ensure that they are rigorously applied. c. also ensures that inspections of both material and workmanship are carried out in accordance with the required quality assurance programs. arwick c. 1-1
I.D. Pipe SM 77 & Fittings SM 77 Suary of specification. Our I.D. (side Diameter) pipes and fittings in austenitic stainless steel are manufactured as per specification SM 77 for pipe and SM 77 for fittings. With our high-tech equipment, pipe and fittings offer an excellent price/quality ratio. Pipe and fittings in inventory of this class are manufactured from SM 20-30L & 316L base material. Other alloys are available upon request. Pipes and fittings manufactured as per SM 77 & SM 77 specifications are coonly used in pulp and paper mills, water treatment plants and other industries where corrosion resistance is not essential [See Note (1)]. Longitudinal seams are welded as per our qualified welding procedures using automatic or semi-automatic state of the art plasma welding torches in a single or double set-up. his welding procedure reduces greatly the effects of carbides precipitation in the heated affected zone. Pipe and fittings can be supplied in a wide range of diameters and wall thicknesses. Dimensions and tolerances of fabricated fittings are in the technical section, see Page 7-6. Special fittings can be supplied to customer design and size when required. Only visual examination is performed on fitting. Pipe and fittings are also pickled and passivated as per SM -30 to maintain corrosion resistance and to prevent surface discoloration from free iron oxidation. ase metal analysis is traceable to the original mill certificates. s per SM -77 & -77, tolerance of nominal thickness permissible shall be ± 12.5% Pipe and fittings are normally furnished in square cut ends but can also be provided with beveled ends. Note 1. For heat treated pipe and fittings, please refer to section.0 of SM -312 and SM -03. For each lot of pipe, a tension, reverse, forward bend tests is performed. Welded elbows can be supplied as smooth flow or mitred construction, reducers are supplied as conical, tees, crosses and laterals are supplied as nozzle-welded. arwick c. 2-1
I.D. Pipes SM 77 I.D. hk. I.D. side Diameter hickness and 1 gauge 11 gauge 10 gauge 3/16'' th. 1/'' th. 0.07 in / 2.0 0.125 in / 3.2 0.10 in / 3.6 0.175 in /.7 0.25 in / 6.3 ches lb / ft kg / m lb / ft kg / m lb / ft kg / m lb / ft kg / m lb / ft kg / m 1 1/2 3 1.3 2.0 2.2 3.3 2 51 1. 2.6 2.9.3 2 1/2 6 2.2 3.3 3.6 5.3 3 76 2.6 3.9.3 6. 102 3.5 5.2 5.6. 5 127.3 6. 7.0 10. 6 152 5.2 7.7. 12.5 203 6.9 10.2 11.1 16.5 10 25 13. 20.6 12 305 16.6 2.7 1 356 19.3 2.7 21.6 32.2 16 06 22.0 32. 2.7 36.7 33.1 9.3 1 57 2. 36.9 27.7 1.3 37.2 55.3 20 50 27.5 0.9 30. 5. 1.3 61. 55.3 2. 2 610 33.0 9.1 9.5 73.6 66.3 9.6 30 762 1.2 61.3 61.7 91.9 2.7 123.0 36 91 9. 73.5 7.0 110.1 99.1 17. 2 1067 57.6 5.7 6.3 12. 115.5 171. 1219 65. 97.9 9.5 16.6 131.9 196.3 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section.. d. Other diameter and thickness available upon request arwick c. 2-3
I.D. 90 Elbows SM 77 I.D. side Diameter [Nominal hickness] 90 Elbow, Long Radius 90 Elbow, Short Radius 1 Gauge lb kg lb kg 1 1/2 3 1 0.07 2.0 0. 0.2 2.250 57 11 0.125 3.2 0.7 0.3 2 51 1 0.07 2.0 0.7 0.3 3.000 76 11 0.125 3.2 1.1 0.5 2 1/2 6 1 0.07 2.0 1.1 0.5 3.750 95 11 0.125 3.2 1. 0. 3 76 1 0.07 2.0 1.5 0.7.500 11 11 0.125 3.2 2.5 1.1 102 1 0.07 2.0 2.7 1.2 6.000 152 11 0.125 3.2. 2.0 5 127 1 0.07 2.0.3 1.9 7.500 191 11 0.125 3.2 6.9 3.1 6 152 203 1 0.07 2.0 6.1 2. 9.000 229 11 0.125 3.2 9.9.5 1 0.07 2.0 10..9 ------ ------ 12.000 305.000 203 11 0.125 3.2 17. 7.9 11.6 5.3 I.D. 10 25 11 0.125 3.2 15.000 31 27.2 12.3 10.000 25 1.1.2 12 305 11 0.125 3.2 1.000 57 39.0 17.7 12.000 305 26.0 11. 90 Elbow Long Radius 1 356 11 0.125 3.2 53.1 2.1 ------ ------ 21.000 533 1.000 356 3/16" 0.1. 79.9 36.3 53.3 2.2 11 0.125 3.2 69.2 31. ------ ------ 16 06 10 0.10 3.6 2.000 610 77.6 35.2 16.000 06 51.7 23.5 3/16" 0.1. 10.2 7.3 69.5 31.5 11 0.125 3.2 7.5 39.7 ------ ------ 1 57 3/16" 0.1. 27.000 66 131. 59. 1.000 57 7. 39. 1 1/" 0.250 6. 176.3 0.0 117.5 53.3 11 0.125 3.2 10.0 9.0 ------ ------ 20 50 3/16" 0.1. 30.000 762 162.5 73.7 20.000 50 10.3 9.1 I.D.. 90 Elbow Short Radius 2 610 30 762 1/" 0.250 6. 217.3 9.6 1.9 65.7 3/16" 0.1. 233.6 106.0 ------ ------ 36.000 91 2.000 610 1/" 0.250 6. 312.3 11.7 20.2 9.5 3/16" 0.1. 5.000 113 36.5 165.3 30.000 762 ------ ------ 1/" 0.250 6. 7.0 220.9 32.7 17.3 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. 2- c.
I.D. 5 Elbow s SM 77 I.D. side Diameter [Nominal hickness] 5 Elbow Gauge lb kg 1 1/2 3 1 0.07 2.0 0.2 0.1 1.120 2 11 0.125 3.2 0.3 0.1 2 51 1 0.07 2.0 0.3 0.2 1.375 35 11 0.125 3.2 0.6 0.3 2 1/2 6 1 0.07 2.0 0.5 0.2 1.750 11 0.125 3.2 0.9 0. 3 76 1 0.07 2.0 0. 0. 2.000 51 11 0.125 3.2 1.3 0.6 102 1 0.07 2.0 1. 0.6 2.500 6 11 0.125 3.2 2.2 1.0 5 127 1 0.07 2.0 2.1 1.0 3.120 79 11 0.125 3.2 3. 1.6 6 152 1 0.07 2.0 3.1 1. 3.750 95 11 0.125 3.2.9 2.2 1 0.07 2.0 5. 2.5 203 5.000 127 11 0.125 3.2.7.0 10 25 11 0.125 3.2 6.250 159 13.6 6.2 12 305 11 0.125 3.2 7.500 191 19.5.9 1 356 11 0.125 3.2 26.5 12.0.750 222 3/16" 0.1. 0.0 1.1 11 0.125 3.2 3.6 15.7 16 06 10 0.10 3.6 10.000 25 3. 17.6 3/16" 0.1. 52.1 23.6 I.D 11 0.125 3.2 3. 19.9 1 57 3/16" 0.1. 11.250 26 65.9 29.9 1/" 0.250 6..1 0.0 11 0.125 3.2 5.0 2.5 20 50 3/16" 0.1. 12.500 31 1.3 36.9 1/" 0.250 6. 10.7 9.3 2 610 3/16" 0.1. 116. 53.0 15.000 31 1/" 0.250 6. 156.2 70. 30 762 3/16" 0.1. 1.625 73 12.3 2.7 1/" 0.250 6. 23.5 110.5 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. arwick c. 2-5
I.D. Mitred Elbows SM 77 able I.D. side Diameter 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow Gauge lb kg lb kg lb kg 1 1/2 2 3 51 1 1 1.1 1.5 0.5 0.7 0.7 1.1 0.3 0.5 0.5 0.7 0.2 0.3 11 11 1. 2.5 0. 1.1 1.2 1.7 0.5 0. 0. 1.2 0. 0.5 3 6 1 2.0 0.9 1.5 0.7 1.1 0.5 11 3.3 1.5 2. 1.1 1.7 0. 3 5 6 76 102 127 152 203 1 1 1 1 1 2.7.2 5.9 7.9 12. 1.2 1.9 2.7 3.6 5. 1.9 3.0.3 5.5.2 0.9 1. 2.0 2.5 3.7 1.3 2.2 3.1.1 6.1 0.6 1.0 1. 1.9 2. 11 11 11 11 11. 6.7 9.5 12. 20.6 2.0 3.1.3 5. 9. 3.1.9 7.0.9 13.3 1. 2.2 3.2.0 6.0 2.1 3.6 5.0 6.7 9. 0.9 1.6 2.3 3.0. 10 25 11 30.3 13.7 20.2 9.2 1. 6.5 12 305 11 1.7 1.9 26. 12.0 19.9 9.0 1 356 11 55.0 25.0 35. 16.3 23.2 10.5 10 61.7 2.0 0.2 1.2 26.0 11. 11 70.1 31. 3. 19.9 2.2 12. 16 06 10 7.6 35.7 9.1 22.3 31.6 1.3 3/16 105.6 7.9 66.0 29.9 2.5 19.3 11 7.0 39.5 5.2 2.6 33.7 15.3 1 57 10 97.6.3 60. 27.6 37. 17.1 3/16 131.0 59. 1.6 37.0 50.7 23.0 11 105..0 65.6 29. 1. 19.0 20 50 10 11.5 53. 73.6 33. 6.9 21.3 3/16 159.1 72.2 9.. 62.9 2.5 1/ 212. 96.5 132.1 59.9.2 3.2 11 1.6 67. 96.2 3.6 5.1 26.3 2 610 10 166.6 75.6 107..9 65.1 29.5 3/16 223.5 101. 1.6 65.6 7.3 39.6 1/ 29. 135.6 193. 7.7 116.7 52.9 30 36 2 762 91 1067 1219 3/16 3/16 3/16 3/16 30.5 2.0 67.9 3.3 15.5 21.6 293.9 30.3 205.1 275. 355.5 5. 93.1 12.9 161.3 202.0 1.6 213.7 290.7 379.5 67. 97.0 131.9 172.1 1/ 1/ 1/ 1/ 55.0 63. 65.2 1119.2 206. 292.0 392.5 507.7 27.1 367.9 7.7 59.6 12.3 166.9 215.3 269.7 19.5 25.5 3.2 506.6 90.0 129.5 176.1 229. 2-6 c.
I.D. Mitred Elbows SM 77 I.D. side Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow C Gauge 1 1/2 2 3 51 1 1 0.07 0.07 2.0 2.0 11 11 0.125 0.125 3.2 3.2 6.000 6.500 152 165.000.500 102 11 2.250 2.500 57 6 2 1/2 6 1 0.07 2.0 11 0.125 3.2 7.000 17 5.000 127 3.000 76 3 5 6 76 102 127 152 203 1 1 1 1 1 0.07 0.07 0.07 0.07 0.07 2.0 2.0 2.0 2.0 2.0 11 11 11 11 11 0.125 0.125 0.125 0.125 0.125 3.2 3.2 3.2 3.2 3.2 7.750 9.000 10.250 11.500 1.000 197 229 260 292 356 5.500 6.500 7.500.000 9.000 10 165 191 203 229 3.000.000.500 5.000 5.500 76 102 11 127 10 10 25 11 0.125 3.2 16.500 19 11.000 279 6.500 165 12 305 11 0.125 3.2 19.000 3 12.000 305 7.500 191 1 356 11 0.125 3.2 10 0.10 3.6 21.500 56 1.000 356 7.500 191 11 0.125 3.2 16 06 10 0.10 3.6 2.000 610 15.000 31.000 203 3/16 0.1. 11 0.125 3.2 1 57 10 0.10 3.6 26.500 673 16.500 19.500 216 3/16 0.1. 11 0.125 3.2 20 50 10 0.10 3.6 3/16 0.1. 29.000 737 1.000 57 9.500 21 1/ 0.250 6. 11 0.125 3.2 2 610 10 0.10 3.6 3/16 0.1. 3.000 6 22.000 559 11.000 279 1/ 0.250 6. 30 36 2 762 91 1067 1219 3/16 3/16 3/16 3/16 0.1 0.1 0.1 0.1.... 1/ 1/ 1/ 1/ 0.250 0.250 0.250 0.250 6. 6. 6. 6. 1.500 9.000 56.500 6.000 105 125 135 1626 25.000 2.000 31.000 3.000 635 711 77 6 15.000 1.000 21.000 2.000 31 57 533 610 C I.D. 90 Mitred Elbow Long Radius I.D. 90 Mitred Elbow Short Radius C I.D. 5 Mitred Elbow a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 2-7
I.D. Reducers SM 77 I.D. side Diameter [Nominal hickness] Gauge Po lb kg I.D. Concentric reducer I.D. Eccentric Reducer 1 1/2 2 3 51 1 0.07 2.0 0.5 0.2.500 11 11 0.125 3.2 0. 0. 1 0.07 2.0 0.7 0.3 5.000 127 11 0.125 3.2 1.2 0.5 2 1/2 3 6 76 102 1 0.07 2.0 1.0 0.5 5.500 10 11 0.125 3.2 1.6 0.7 1 0.07 2.0 1.3 0.6 6.000 152 11 0.125 3.2 2.1 1.0 1 0.07 2.0 2.0 0.9 7.000 17 11 0.125 3.2 3.3 1.5 5 127 1 0.07 2.0 2.9 1.3.000 203 11 0.125 3.2.7 2.1 6 152 203 1 0.07 2.0 3.9 1. 9.000 229 11 0.125 3.2 6.3 2. 1 0.07 2.0 6.3 2.9 11.000 279 11 0.125 3.2 10.2.6 10 25 11 0.125 3.2 12.000 305 13. 6.3 12 305 11 0.125 3.2 1.000 356 19.3. 1 356 11 0.125 3.2 25.7 11.7 16.000 06 10 0.10 3.6 2.9 13.1 11 0.125 3.2 33.1 15.0 16 06 10 0.10 3.6 1.000 57 37.1 16. 3/16 0.1. 9. 22.6 11 0.125 3.2 39.2 17. 1 57 10 0.10 3.6 19.000 3.0 19.9 3/16 0.1. 59.0 26. 11 0.125 3.2 5. 20. 20 50 10 0.10 3.6 51. 23.3 20.000 50 3/16 0.1. 69.0 31.3 1/ 0.250 6. 92.2 1. 11 0.125 3.2 65.9 29.9 2 610 10 0.10 3.6 73.9 33.5 2.000 610 3/16 0.1. 99.2 5.0 1/ 0.250 6. 132.6 60.1 30 36 2 762 91 1067 3/16 0.1. 15.7 70.2 30.000 762 1/ 0.250 6. 206.7 93. 3/16 0.1. 222.5 100.9 36.000 91 1/ 0.250 6. 297.2 13. 3/16 0.1. 302.7 137.3 2.000 1067 1/ 0.250 6. 0.2 13.3 1219 3/16 0.1. 395.1 179.2.000 1219 1/ 0.250 6. 527.5 239.3 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 2- c.
I.D. ees & Cross SM 77 I.D. side Diameter [Nominal hickness] ee Cross Gauge lb kg lb kg 1 1/2 2 3 76 5 127 6 152 203 1 0.07 2.0 1.3 0.6 1. 0..000 102 11 0.125 3.2 2.2 1.0 3.0 1.3 1 0.07 2.0 2.0 0.9 2.7 1.2.500 11 11 0.125 3.2 3.3 1.5. 2.0 1 0.07 2.0 2.7 1.2 3.7 1.7 5.000 127 11 0.125 3.2.5 2.0 6.0 2.7 1 0.07 2.0 3.6 1.6. 2.2 5.500 10 11 0.125 3.2 5.9 2.7 7. 3.6 1 0.07 2.0 5.7 2.6 7.5 3. 6.500 165 11 0.125 3.2 9.2.2 12.2 5.5 1 0.07 2.0.1 3.7 10..9 7.500 191 11 0.125 3.2 13.1 6.0 17.5 7.9 1 0.07 2.0 10..7 13. 6.3.000 203 11 0.125 3.2 16.7 7.6 22.3 10.1 1 0.07 2.0 15.5 7.0 20.7 9. 9.000 229 11 0.125 3.2 25.0 11. 33.3 15.1 10 25 11 0.125 3.2 11.000 279 3.1 17.3 50.7 23.0 12 305 11 0.125 3.2 12.000 305 9.7 22.6 66.3 30.1 1 2 2 3 51 2 1/2 6 102 1 16 20 36 356 06 57 50 610 30 762 91 11 0.125 3.2 67.6 30.7 90.1 0.9 1.000 356 10 0.10 3.6 75.7 3. 101.0 5. 11 0.125 3.2 2.6 37.6 110.2 50.0 10 0.10 3.6 15.000 31 92.6 2.1 123.5 56.0 3/16 0.1. 12. 56.6 165.9 75.3 11 0.125 3.2 102.2 6. 136.2 61. 10 0.10 3.6 16.500 19 11.5 52.1 152.7 69.3 3/16 0.1. 153. 69.9 205.1 93.0 11 0.125 3.2 123. 56.3 165.0 7.9 10 0.10 3.6 13.7 63.1 15.0 3.9 1.000 57 3/16 0.1. 16.2.6 2.3 112.6 1/ 0.250 6. 29.1 113.2 332.1 150.6 11 0.125 3.2 11.3 2. 21. 109.7 10 0.10 3.6 203.2 92. 271.0 122.9 22.000 559 3/16 0.1. 272.7 12.0 363.6 16.9 1/ 0.250 6. 36.5 165.7 6.1 220.5 3/16 0.1. 36. 175. 515.7 233.9 25.000 635 1/ 0.250 6. 516.7 23.9 69.0 312.5 3/16 0.1. 519.3 236.0 692. 31.1 2.000 711 1/ 0.250 6. 693.5 315.2 92.7 19.5 3/16 0.1. 670.2 30.6 93.6 05.3 1067 31.000 77 1/ 0.250 6. 9.9 06. 1193.3 51.3 3/16 0.1. 39.6 31.6 1119.5 507. 1219 3.000 6 1/ 0.250 6. 1121.0 509.5 19.6 67.0 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. ee ee with reinforcement I.D. I.D. I.D. Note: 1. he addition of reinforcement may be necessary. Upon request, the verification can be performed by arwick, please contact a technical representative for more information. Cross [Note (1)] arwick c. 2-9
I.D. Laterals SM 77 I.D. side Diameter [Nominal hickness] C C 5 Lateral C 5 Lateral with reinforcement I.D. I.D. Gauge lb kg 1 1/2 2 2 1/2 3 5 6 3 51 6 76 102 127 152 203 1 0.07 2.0 1. 0. 2.000 51 7.000 17 9.000 229 11 0.125 3.2 3.0 1.3 1 0.07 2.0 2.7 1.2 2.500 6.000 203 10.500 267 11 0.125 3.2.5 2.0 1 0.07 2.0 3.9 1. 2.500 6 9.500 21 12.000 305 11 0.125 3.2 6. 2.9 1 0.07 2.0 5.0 2.3 3.000 76 10.000 25 13.000 330 11 0.125 3.2.2 3.7 1 0.07 2.0 7. 3.5 3.000 76 12.000 305 15.000 31 11 0.125 3.2 12.7 5. 1 0.07 2.0 11.0 5.0 3.500 9 13.500 33 17.000 32 11 0.125 3.2 17..1 1 0.07 2.0 1.0 6. 3.500 9 1.500 36 1.000 57 11 0.125 3.2 22.7 10.3 1 0.07 2.0 22.7 10.3.500 11 17.500 5 22.000 559 11 0.125 3.2 36.5 16.6 10 25 11 0.125 3.2 5.000 127 20.500 521 25.500 6 53.0 2.1 12 305 11 0.125 3.2 5.500 10 2.500 622 30.000 762 75.3 3.1 1 356 11 0.125 3.2 96.5 3. 6.000 152 27.000 66 33.000 3 10 0.10 3.6 10.2 9.1 11 0.125 3.2 122.1 55. 16 06 10 0.10 3.6 6.500 165 30.000 762 36.500 927 136.9 62.1 3/16 0.1. 13.9 3. 11 0.125 3.2 16.6 66.5 1 57 10 0.10 3.6 7.000 17 32.000 13 39.000 991 16.3 7.5 3/16 0.1. 220.6 100.1 11 0.125 3.2 17. 1.1 20 50 10 0.10 3.6 200. 90.9.000 203 35.000 9 3.000 1092 3/16 0.1. 269.0 122.0 1/ 0.250 6. 359. 163.2 11 0.125 3.2 27.3 112.2 2 610 10 0.10 3.6 277.1 125.7 9.000 229 0.500 1029 9.500 1257 3/16 0.1. 371.9 16.7 1/ 0.250 6. 97.1 225.5 30 36 2 762 91 1067 1219 3/16 0.1. 556.9 252.6 10.000 25 9.000 125 59.000 199 1/ 0.250 6. 7.1 337.5 3/16 0.1. 90.2 03. 2.000 610 60.000 152.000 213 1/ 0.250 6. 11.9 539.3 3/16 0.1. 111.9 536.1 26.000 660 69.000 1753 95.000 213 1/ 0.250 6. 157.2 715.9 3/16 0.1. 19.9 675. 27.000 66 77.000 1956 10.000 262 1/ 0.250 6. 199.1 902.3 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 2-10 c.
I.D. Wyes SM 77 I.D. side Diameter [Nominal hickness] Gauge lb kg 1 1/2 3 1 0.07 2.0 1.0 0. 3.375 6 2.000 51 11 0.125 3.2 1.6 0.7 2 2 1/2 3 51 6 76 1 0.07 2.0 1.7 0..500 11 2.500 6 11 0.125 3.2 2. 1.3 1 0.07 2.0 2.3 1.0 5.000 127 2.500 6 11 0.125 3.2 3.7 1.7 1 0.07 2.0 3.1 1. 5.500 10 3.000 76 11 0.125 3.2 5.0 2.3 102 1 0.07 2.0.6 2.1 6.500 165 3.000 76 11 0.125 3.2 7.5 3. 5 6 127 152 203 1 0.07 2.0 6.7 3.0 7.500 191 3.500 9 11 0.125 3.2 10..9 1 0.07 2.0. 3..000 203 3.500 9 11 0.125 3.2 13.6 6.2 1 0.07 2.0 12.9 5.9 9.000 229.500 11 11 0.125 3.2 20. 9. 10 25 11 0.125 3.2 11.000 279 5.000 127 31.1 1.1 12 305 11 0.125 3.2 12.000 305 5.500 10 0.7 1.5 1 356 11 0.125 3.2 5.7 2. 1.000 356 6.000 152 10 0.10 3.6 61.3 27. 11 0.125 3.2 67.0 30. 16 06 10 0.10 3.6 15.000 31 6.500 165 75.1 3.1 3/16 0.1. 100.9 5. 11 0.125 3.2 2.6 37.5 1 57 10 0.10 3.6 16.500 19 7.000 17 92.5 2.0 3/16 0.1. 12.3 56. 11 0.125 3.2 100. 5.7 20 50 10 0.10 3.6 113.0 51.3 1.000 57.000 203 3/16 0.1. 151.7 6. 1/ 0.250 6. 202.9 92.1 11 0.125 3.2 15.6 66.1 2 610 10 0.10 3.6 163.2 7.0 22.000 559 9.000 229 3/16 0.1. 219.0 99.3 1/ 0.250 6. 292.7 132. 30 36 762 91 3/16 0.1. 309. 10.3 25.000 635 10.000 25 1/ 0.250 6. 13. 17.5 3/16 0.1. 9.5 22.3 2.000 711 2.000 610 1/ 0.250 6. 660.5 299.6 2 1067 3/16 0.1. 63.2 27.7 31.000 77 26.000 660 1/ 0.250 6. 6. 3.1 1219 3/16 0.1. 72.0 35.7 3.000 6 27.000 66 1/ 0.250 6. 10.0 73.6 I.D. a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. e. he addition of reinforcement may be necessary. Upon request, the verification can be performed by, please contact a technical representative for more information. arwick c. 2-11
I.D. Pressed Collars SM 77 I.D. side Diameter [Nominal hickness] I.D. Pressed Collars Gauge. lb kg 1 1/2 3 11 0.125 3.2 2.75 73 0.625 16 0.2 0.1 2 51 11 0.125 3.2 3.500 9 0.625 16 0.3 0.1 2 1/2 6 11 0.125 3.2.000 102 0.625 16 0. 0.2 3 76 11 0.125 3.2 5.000 127 0.625 16 0.6 0.3 102 11 0.125 3.2 6.500 165 0.625 16 0.9 0. 5 127 11 0.125 3.2 7.500 191 0.625 16 1.0 0.5 6 152 11 0.125 3.2.500 216 0.625 16 1.3 0.6 203 11 0.125 3.2 10.750 273 0.625 16 1. 0. 10 25 11 0.125 3.2 13.000 330 0.625 16 2. 1.1 12 305 11 0.125 3.2 15.000 31 0.625 16 3.5 1.6 1 356 11 0.125 3.2 17.500 5 0.750 19.0 1. 16 06 11 0.125 3.2 19.750 502 0.750 19 5.0 2.3 I.D. [side Diameter] [Nominal hickness] C Gauge. lb kg I.D. C 2 51 11 0.125 3.2 3.500 9 2.000 51 1.1 0.5 3 76 11 0.125 3.2 5.000 127 2.500 6 1.3 0.6 102 11 0.125 3.2 6.500 165 3.000 76 2.0 0.9 6 152 11 0.125 3.2.500 216 3.500 9 3.6 1.6 203 11 0.125 3.2 10.625 270.000 102 5.2 2. 10 25 11 0.125 3.2 12.750 32 5.000 127 7.9 3.6 12 305 11 0.125 3.2 15.000 31 6.000 152 10..7 Long Neck Collars ype C a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. 2-12 c.
I.D. ngle Collars SM 77 I.D. side Diameter ngle Dimension -C-. lb kg 3 76 3/ x 3/ x 1/ 19 x 19 x 3.2 0.5 0.2 102 1 x 1 x 1/ 25 x 25 x 3.2 0. 0. 5 127 1 x 1 x 1/ 25 x 25 x 3.2 1.0 0.5 6 152 203 10 25 12 305 1 356 16 06 1 57 20 50 2 610 30 762 36 91 2 1067 1219 Outside of pipe diameter + 1/16" (1. ) Outside of pipe diameter + 1/" (3.2 ) 1 x 1 x 1/ 25 x 25 x 3.2 1.3 0.6 1 x 1 x 3/16 25 x 25 x. 1. 0. 1 1/ x 1 1/ x 1/ 32 x 32 x 3.2 2.1 1.0 1 1/ x 1 1/ x 3/16 32 x 32 x. 3.2 1. 1 1/2 x 1 1/2 x 1/ 3 x 3 x 3.2 2.6 1.2 1 1/2 x 1 1/2 x 3/16 3 x 3 x..0 1. 1 1/2 x 1 1/2 x 1/ 3 x 3 x 3.2 3.9 1. 1 1/2 x 1 1/2 x 3/16 3 x 3 x. 5.7 2.6 1 1/2 x 1 1/2 x 1/ 3 x 3 x 3.2.5 2.0 1 1/2 x 1 1/2 x 3/16 3 x 3 x. 6.6 3.0 1 1/2 x 1 1/2 x 3/16 3 x 3 x. 7.5 3. 1 1/2 x 1 1/2 x 1/ 3 x 3 x 6.3 9.. 1 1/2 x 1 1/2 x 3/16 3 x 3 x..5 3. 1 1/2 x 1 1/2 x 1/ 3 x 3 x 6.3 11.0 5.0 1 1/2 x 1 1/2 x 3/16 3 x 3 x. 9..3 1 1/2 x 1 1/2 x 1/ 3 x 3 x 6.3 12.3 5.6 2 x 2 x 3/16 51 x 51 x. 15.3 7.0 2 x 2 x 1/ 51 x 51 x 6.3 20.0 9.1 2 x 2 x 1/ 51 x 51 x 6.3 25.1 11. 2 x 2 x 3/ 51 x 51 x 9.5 36.9 16.7 2 x 2 x 1/ 6 x 6 x 6.3 3.6 17.5 2 x 2 x 3/ 6 x 6 x 9.5 65.0 29.5 2 1/2 x 2 1/2 x 1/ 6 x 6 x 6.3 5.1 20. 2 1/2 x 2 1/2 x 3/ 6 x 6 x 9.5 75.9 3. 2 1/2 x 2 1/2 x 1/ 6 x 6 x 6.3 51.5 23. 2 1/2 x 2 1/2 x 3/ 6 x 6 x 9.5 6.7 39.3 C I.D. utt Weld ngle Collars For using with acking Flanges See P. 2-15 Slip-on ngle Collars For using with Slip-on acking Flange See P. 2-16 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 2-13
I.D. Stub-End ype I.D. side Diameter t [Nominal hickness] Weigth. lb kg 6 152 0.125 3.2.500 216 3.500 9 3. 1.5 203 0.125 3.2 10.625 270.000 102 5.0 2.3 10 25 0.125 3.2 12.750 32 5.000 127 7.5 3. " " Not less than '' t ' 12 305 0.125 3.2 15.000 31 6.000 152 10.5. 1 356 0.10 3.6 16.250 13 6.000 152 12.9 5.9 16 06 0.17.7 1.500 70 6.000 152 19.5. 1 57 0.17.7 21.000 533 6.000 152 22. 10.3 20 50 0.250 6. 23.000 5 6.000 152 33.5 15.2 2 610 0.250 6. 27.500 699 6.000 152 0.9 1.6 30 762 0.312 7.9 33.750 57 6.000 152 65. 29.7 36 91 0.312 7.9 0.250 1022 6.000 152 96.5 3. I.D. 37.50.062 t See detail '''' Detail '''' [Note 1] a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. [] not less than [t]. c. he two faces are machined, the contact face is machined between 125 and 250 microinches (RH) d. Solution nnealing on request. e. Other diameter, thicknesses and sizes available upon request. Note: 1. evel for thickness (t) > 1/ (3) 2-1 c.
I.D. acking Flanges Nominal I.D. Diameter # of holes lb kg 1 1/2 5.000 2.000 3.75 0.625 0.750 3.6 3 127 51 9 16 19 1.6 2 6.000 2.500.750 0.750 0.750.7 51 152 6 121 19 19 2.1 2 1/2 7.000 3.000 5.500 0.750 0.750 6.2 6 17 76 10 19 19 2. 3 7.500 3.625 6.000 0.750 0.750 7.1 76 191 92 152 19 19 3.2 9.000.625 7.500 0.750 0.750 9.5 102 229 117 191 19 19.3 5 10.000 5.625.500 0.75 0.750 10.7 127 25 13 216 22 19.9 6 11.000 6.625 9.500 0.75 0.750 12.3 152 279 16 21 22 19 5.6 13.500.625 11.750 0.75 0.750 17.7 203 33 219 29 22 19.0 10 16.000 10.750 1.250 1.000 1.000 30.2 12 25 06 273 362 25 25 13.7 12 19.000 12.750 17.000 1.000 1.000 3.5 12 305 3 32 32 25 25 19.7 1 21.000 1.750 1.750 1.125 1.125 55.0 12 356 533 375 76 29 29 2.9 16 23.500 16.750 21.250 1.125 1.125 66.0 16 06 597 25 50 29 29 29.9 1 25.000 1.750 22.750 1.250 1.250 1. 16 57 635 76 57 32 32 36.9 20 27.500 20.75 25.000 1.250 1.250 6.3 20 50 699 530 635 32 32 39.1 2 32.000 2.75 29.500 1.375 1.375 121.0 20 610 13 632 79 35 35 5.9 30 3.750 31.000 36.000 1.375 1.625 176.0 2 762 9 77 91 35 1 79. 36 6.000 37.000 2.750 1.625 1.625 237.0 32 91 116 90 106 1 1 107.5 2 53.000 3.000 9.500 1.625 1.750 337.0 36 1067 136 1092 1257 1 152.9 59.500 9.000 56.000 1.625 2.000 55.0 1219 1511 125 122 1 51 206. I.D. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 2-15
I.D. Slip-on acking Flanges. I.D. Nominal I.D. Diameter # of holes lb kg 3 7.500 3.75 6.000 0.750 0.750 7.1 76 191 9 152 19 19 3.2 9.000.75 7.500 0.750 0.750 9.5 102 229 12 191 19 19.3 5 10.000 5.75.500 0.75 0.750 10.7 127 25 19 216 22 19.9 6 11.000 6.75 9.500 0.75 0.750 12.3 152 279 175 21 22 19 5.6 13.500.75 11.750 0.75 0.750 17.7 203 33 225 29 22 19.0 10 16.000 11.000 1.250 1.000 1.000 30.2 12 25 06 279 362 25 25 13.7 12 19.000 13.000 17.000 1.000 1.000 3.5 12 305 3 330 32 25 25 19.7 1 21.000 15.000 1.750 1.125 1.125 55.0 12 356 533 31 76 29 29 2.9 16 23.500 17.000 21.250 1.125 1.125 66.0 16 06 597 32 50 29 29 29.9 1 25.000 19.250 22.750 1.250 1.250 1. 16 57 635 9 57 32 32 36.9 20 27.500 21.375 25.000 1.250 1.250 6.3 20 50 699 53 635 32 32 39.1 2 32.000 25.375 29.500 1.375 1.375 121.0 20 610 13 65 79 35 35 5.9 30 3.750 31.750 36.000 1.375 1.625 176.0 2 762 9 06 91 35 1 79. 36 6.000 37.750 2.750 1.625 1.625 237.0 32 91 116 959 106 1 1 107.5 2 53.000 3.750 9.500 1.625 1.750 337.0 36 1067 136 1111 1257 1 152.9 59.500 9.750 56.000 1.625 2.000 55.0 1219 1511 126 122 1 51 206. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. 2-16 c.
lind Flanges Nominal C Diameter # of holes lb kg 1 1/2 5.000 3.75 0.625 3.000 0.750.3 3 127 9 16 76 19 2.0 2 6.000.750 0.750 3.500 0.750 6.2 51 152 121 19 9 19 2. 2 1/2 7.000 5.500 0.750.500 0.750.5 6 17 10 19 11 19 3.9 3 7.500 6.000 0.750 5.000 0.750 9. 76 191 152 19 127 19. 9.000 7.500 0.750 6.500 0.750 1.0 102 229 191 19 165 19 6. 5 10.000.500 0.75 7.375 0.750 17.6 127 25 216 22 17 19.0 6 11.000 9.500 0.75.375 0.750 21.0 152 279 21 22 213 19 9.5 13.500 11.750 0.75 10.625 0.750 32.2 203 33 29 22 270 19 1.6 10 16.000 1.250 1.000 13.000 1.000 5.0 12 25 06 362 25 330 25 26.3 12 19.000 17.000 1.000 15.625 1.000 3.1 12 305 3 32 25 397 25 37.7 1 21.000 1.750 1.125 17.250 1.125 113.0 12 356 533 76 29 3 29 51.3 16 23.500 21.250 1.125 19.750 1.125 12.0 16 06 597 50 29 502 29 6. 1 25.000 22.750 1.250 21.125 1.250 179.0 16 57 635 57 32 537 32 1.2 20 27.500 25.000 1.250 23.375 1.250 217.5 20 50 699 635 32 59 32 9.7 2 32.000 29.500 1.375 27.750 1.375 323.0 20 610 13 79 35 705 35 16.5 30 3.750 36.000 1.375 3.250 1.500 530.0 2 762 9 91 35 70 3 20. 36 6.000 2.750 1.625 0.750 1.500 755.0 32 91 116 106 1 1035 3 32.5 2 53.000 9.500 1.625 6.750 1.500 906.0 36 1067 136 1257 1 117 3 11.0 59.500 56.000 1.625 52.750 1.750 133.0 1219 1511 122 1 130 605.1 1/16'' C a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105 and 316L Stainless Steel linner. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 2-17
Pipe SM 77 & Fittings SM 77 Suary of specifications Our (1) (Nominal Pipe Size) pipes and fittings in austenitic stainless steel are manufactured as per specification SM 77 for pipe and SM 77 for fittings. With our high-tech equipment, pipe and fittings offer an excellent price/quality ratio. Pipe and fittings in inventory of this class are manufactured from SM 20 30L & 316L base material. Other alloys are available upon request. Pipes and fittings manufactured as per SM -77 & SM -77 specifications are coonly used in pulp and paper mills, water treatment plants and other industries where corrosion resistance is not essential (2). Longitudinal seams are welded as per our qualified welding procedures using automatic or semi-automatic state of the art plasma welding torches in a single or double set-up. his welding procedure reduces greatly the effects of carbides reprecipitation in the heated affected zone. Pipe and fittings can be supplied in a wide range of diameters and wall thicknesses. Dimensions and tolerances of fabricated fittings are in the technical section, see (P.7-6). Special fittings can be supplied to customer design and size when required. Only visual examination is performed on fitting. Pipe and fittings are also pickled and passivated as per SM -30 to maintain corrosion resistance and to prevent surface discoloration from free iron oxidation. ase metal analysis is traceable to the original mill certificates. s per SM -77 & -77, tolerance of nominal thickness permissible shall be ± 12.5% Pipe and fittings are normally furnished in square cut ends but can also be provided with beveled ends. Notes: 1. See also section.0 for SM 312 and SM 03. 2. For pipe and fitting heat treated please refer to section.0 SM 312 & 03. For each lot of pipe, a tension, reverse, forward bend tests is performed. Welded elbows can be supplied as smooth flow or mitered construction, tees, crosses and laterals are supplied as nozzle-welded. Reducers are supplied as conical. arwick c. 3-1
Pipe SM 77 Nominal Pipe Size Outside Diameter [Nominal (Épaisseur hickness] des parois) Nominal Pipe Size Outsude Diameter E [Nominal (Épaisseur hickness] des parois) Ga / Sch lb / ft kg / m 3/ 19 1 1 1/2 2 1/2 3 76 3.500 9 102.500 11 5 127 5.563 11 6 152 203 10 25 1 1/ 32 3 25 1.320 1.900 2 51 2.375 1.050 27 6.625.625 219 10.750 3 1.660 2 60 6 2.75 73 16 273 Sch 5S 0.065 1.7 0.7 1.1 Sch 10S 0.03 2.1 0.9 1. Sch 5S 0.065 1.7 0.9 1. Sch 10S 0.109 2. 1. 2.3 Sch 5S 0.065 1.7 1.1 1. Sch 10S 0.109 2. 1. 3.0 Sch 5S 0.065 1.7 1.3 2.1 Sch 10S 0.109 2. 2.1 3. Sch 5S 0.065 1.7 1.6 2.6 Sch 10S 0.109 2. 2.7.3 Sch 5S 0.03 2.1 2.5.1 Sch 10S 0.120 3.0 3.6 5. 1 0.07 2.0 2.9.7 11 0.125 3.2.6 7. Sch 5S 0.03 2.1 3.1 5.0 Sch 10S 0.120 3.0. 7.1 1 0.07 2.0 3. 6.0 11 0.125 3.2 6.0 9.6 Sch 5S 0.03 2.1.0 6. Sch 10S 0.120 3.0 5.7 9.2 1 0.07 2.0.7 7.5 11 0.125 3.2 7. 11.9 Sch 5S 0.109 2. 6.5 10. Sch 10S 0.13 3..0 12. 1 0.07 2.0 5.6 9.0 11 0.125 3.2.9 1.2 Sch 5S 0.109 2. 7. 12. Sch 10S 0.13 3. 9.5 15.2 1 0.07 2.0 7.3 11.7 11 0.125 3.2 11.6 1.6 Sch 5S 0.109 2. 10.1 16.3 Sch 10S 0.1 3. 13.7 22.0 11 0.125 3.2 1.5 23.3 Sch 5S 0.13 3. 15.6 2.9 Sch 10S 0.165.2 19.1 30.6 Ga / Sch lb / ft kg / m 12 1 356 16 1 20 2 30 305 06 57 50 610 12.750 32 1.000 356 16.000 06 1.000 57 20.000 50 2.000 610 762 30.000 36 91 36.000 762 91 2 1067 2.000 1067 1219.000 1219 Notes: 1. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. 2. Suggested Maximum Working Pressure : See technical section. 3. Fabrication olerance: See technical section... Other diameter and thickness available upon request 11 0.125 3.2 17.3 27.7 Sch 5S 0.156.0 21.5 3. Sch 10S 0.10.6 2.7 39.7 11 0.125 3.2 19.0 30. 10 0.10 3.6 21.2 3.0 Sch 5S 0.156.0 23.6 37.9 Sch 10S 0.1. 2. 5.5 11 0.125 3.2 21.7 3. 10 0.10 3.6 2.3 3.9 Sch 5S 0.165.2 2.6 5. Sch 10S 0.1. 32.5 52.1 11 0.125 3.2 2. 39.2 10 0.10 3.6 27.3 3. Sch 5S 0.165.2 32.2 51.6 Sch 10S 0.1. 36.6 5.7 10 0.10 3.6 30..7 1/'' 0.250 6. 5.0 6.5 Sch 5S 0.1. 0.6 65.1 Sch 10S 0.21 5.5 7.1 75.6 10 0.10 3.6 36.5 5.5 3/16'' 0.1.. 7.3 Sch 5S 0.21 5.5 56.7 90.9 Sch 10S 0.250 6. 6.9 10.1 3/16'' 0.1. 61.1 9.0 Sch 5S 0.250 6. 1.3 130. Sch 10S 0.312 7.9 101.3 162.3 3/16'' 0.1. 73. 117.7 1/'' 0.250 6. 97.7 156.6 5/16'' 0.312 7.9 121.7 195.2 3/16'' 0.1. 5.7 137. 1/'' 0.250 6. 11.1 12.9 5/16'' 0.312 7.9 12.2 22.0 3/16'' 0.1. 9.0 157.1 1/'' 0.250 6. 130.5 209.2 5/16'' 0.312 7.9 162.7 260. arwick c. 3-3
90 Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 1 Ga / Sch lb kg lb kg 1 90 Elbow (Long Radius) 90 Elbow (Short Radius) 1 0.07 2.0 1.7 0. 3 76 3.500 9 11 0.125 3.2 2.7 1.2.500 11 Sch 5S 0.03 2.1 1. 0. Sch 10S 0.120 3.0 2.6 1.2 1 0.07 2.0 3.0 1.3 102.500 11 11 0.125 3.2.7 2.1 6.000 152 Sch 5S 0.03 2.1 3.1 1. Sch 10S 0.120 3.0.5 2.0 1 0.07 2.0.6 2.1 5 127 5.563 11 11 0.125 3.2 7.3 3.3 7.500 191 Sch 5S 0.109 2. 6. 2.9 Sch 10S 0.13 3. 7. 3.5 1 0.07 2.0 6.6 3.0 6 152 6.625 16 11 0.125 3.2 10.5.7 9.000 229 Sch 5S 0.109 2. 9.1.1 Sch 10S 0.13 3. 11.2 5.1 1 0.07 2.0 11. 5.2 ------ ------ 203.625 219 11 0.125 3.2 1.2.3 ------ ------ 12.000 305.000 203 Sch 5S 0.109 2. 15.9 7.2 10.6. Sch 10S 0.1 3. 21.5 9. 1. 6.5 11 0.125 3.2 2.5 12.9 ------ ------ 10 25 10.750 273 Sch 5S 0.13 3. 15.000 31 30.5 13.9 10.000 25 20. 9.2 Sch 10S 0.165.2 37.5 17.0 25.0 11.3 11 0.125 3.2 0.7 1. ------ ------ 12 305 12.750 32 Sch 5S 0.156.0 1.000 57 50.6 23.0 12.000 305 33.7 15.3 Sch 10S 0.10.6 5.3 26. 3.9 17.6 11 0.125 3.2 52.1 23.6 ------ ------ 1 356 1.000 356 Sch 5S 0.156.0 21.000 533 6.9 29. 1.000 356 3.3 19.6 Sch 10S 0.1. 7.0 35. 52.0 23.6 11 0.125 3.2 6.2 30.9 ------ ------ 16 06 16.000 06 10 0.10 3.6 76.3 3.6 ------ ------ 2.000 610 16.000 06 Sch 5S 0.165.2 9.7 0.7 59. 27.1 Sch 10S 0.1. 102.1 6.3 6.1 30.9 11 0.125 3.2 6.3 39.2 ------ ------ 1 57 1.000 57 10 0.10 3.6 96.6 3. ------ ------ 27.000 66 1.000 57 Sch 5S 0.165.2 113.7 51.6 75. 3. Sch 10S 0.1. 129. 5.7 6.3 39.1 10 0.10 3.6 119. 5.1 ------ ------ 20 50 20.000 50 1/'' 0.250 6. 212.0 96.2 ------ ------ 30.000 762 20.000 50 Sch 5S 0.1. 159.5 72.3 106.3.2 Sch 10S 0.21 5.5 15.1.0 123. 56.0 10 0.10 3.6 172.1 7.1 ------ ------ 2 610 2.000 610 3/16'' 0.1. 230.0 10.3 ------ ------ 36.000 91 2.000 610 Sch 5S 0.21 5.5 267.1 121.2 17.1 0. Sch 10S 0.250 6. 305.9 13. 203.9 92.5 10 0.10 3.6 269.2 122.1 ------ ------ 30 762 30.000 762 3/16'' 0.1. 360.0 163.3 ------ ------ 5.000 113 30.000 762 Sch 5S 0.250 6. 79.0 217.3 319.3 1. Sch 10S 0.312 7.9 596.5 270.6 397.7 10. a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Short Radius Elbows are available only in Sch 5S and 10S 3- c.
5 Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 5 Elbow Ga / Sch lb kg 1 0.07 2.0 0.9 0. 3 76 3.500 9 11 0.125 3.2 1. 0.6 1.75 Sch 5S 0.03 2.1 0.9 0. Sch 10S 0.120 3.0 1.3 0.6 1 0.07 2.0 1.5 0.7 102.500 11 11 0.125 3.2 2.3 1.1 2.500 6 Sch 5S 0.03 2.1 1.6 0.7 Sch 10S 0.120 3.0 2.3 1.0 1 0.07 2.0 2.3 1.0 5 127 5.563 11 11 0.125 3.2 3.6 1.7 3.120 79 Sch 5S 0.109 2. 3.2 1. Sch 10S 0.13 3. 3.9 1. 1 0.07 2.0 3.3 1.5 6 152 6.625 16 11 0.125 3.2 5.2 2. 3.750 95 Sch 5S 0.109 2..6 2.1 Sch 10S 0.13 3. 5.6 2.5 1 0.07 2.0 5.7 2.6 203.625 219 11 0.125 3.2 9.1.1 5.000 127 Sch 5S 0.109 2..0 3.6 Sch 10S 0.1 3. 10..9 11 0.125 3.2 1.3 6.5 10 25 10.750 273 Sch 5S 0.13 3. 6.250 159 15.3 6.9 Sch 10S 0.165.2 1.7.5 11 0.125 3.2 20.3 9.2 12 305 12.750 32 Sch 5S 0.156.0 7.500 191 25.3 11.5 Sch 10S 0.10.6 29.1 13.2 11 0.125 3.2 26.1 11. 1 356 1.000 356 Sch 5S 0.156.0.750 222 32.5 1.7 Sch 10S 0.1. 39.0 17.7 11 0.125 3.2 3.1 15.5 16 06 16.000 06 10 0.10 3.6 3.1 17.3 10.000 25 Sch 5S 0.165.2.9 20. Sch 10S 0.1. 51.0 23.2 11 0.125 3.2 3.2 19.6 1 57 1.000 57 10 0.10 3.6.3 21.9 11.250 26 Sch 5S 0.165.2 56.9 25. Sch 10S 0.1. 6.7 29.3 10 0.10 3.6 59.7 27.1 20 50 20.000 50 1/'' 0.250 6. 106.0.1 12.500 31 Sch 5S 0.1. 79.7 36.2 Sch 10S 0.21 5.5 92.6 2.0 10 0.10 3.6 6.0 39.0 2 610 2.000 610 3/16'' 0.1. 115.0 52.2 15.000 31 Sch 5S 0.21 5.5 133.6 60.6 Sch 10S 0.250 6. 152.9 69. 10 0.10 3.6 13.6 61.1 30 762 30.000 762 3/16'' 0.1. 10.0 1.6 1.625 73 Sch 5S 0.250 6. 239.5 10.6 Sch 10S 0.312 7.9 29.3 135.3 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. arwick c. 3-5
Mitred Elbows SM 77 able Nominal Pipe Size 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow lb kg lb kg lb kg 3 76 102 5 127 6 152 203 10 25 12 305 1 356 16 06 1 57 20 50 2 610 30 762 36 91 2 1067 1219 1 1.7 0. 1.2 0.5 0.9 0. 11 2. 1.3 1. 0. 1. 0.6 Sch 5S 1.9 0. 1.2 0.6 0.9 0. Sch 10S 2.6 1.2 1. 0. 1.3 0.6 1 3.0 1. 2.0 0.9 1.5 0.7 11. 2.2 3.2 1. 2. 1.1 Sch 5S 3.2 1. 2.1 1.0 1.6 0.7 Sch 10S.6 2.1 3.0 1. 2.3 1.0 1.7 2.1 3.1 1. 2.3 1.1 11 7. 3..9 2.2 3.7 1.7 Sch 5S 6.5 2.9.3 2.0 3.2 1.5 Sch 10S 7.9 3.6 5.3 2..0 1. 1 6.7 3.0. 2.0 3.3 1.5 11 10.6. 7.1 3.2 5.3 2. Sch 5S 9.3.2 6.2 2..6 2.1 Sch 10S 11.3 5.2 7.6 3. 5.7 2.6 1 11.6 5.3 7.7 3.5 5. 2.6 11 1.5. 12.3 5.6 9.2.2 Sch 5S 16.1 7.3 10..9.1 3.7 Sch 10S 21. 9.9 1.6 6.6 10.9 5.0 11 2.9 13.1 19.3.7 1. 6.6 Sch 5S 30.9 1.1 20.6 9. 15.5 7.0 Sch 10S 3.0 17.3 25.3 11.5 19.0.6 11 1.2 1.7 27.5 12.5 20.6 9.3 Sch 5S 51.3 23.3 3.2 15.5 25.6 11.6 Sch 10S 59.0 26. 39. 17.9 29.5 13. 11 52. 2.0 35.2 16.0 26. 12.0 Sch 5S 65. 29.9 3. 19.9 32.9 1.9 Sch 10S 79.1 35.9 52.7 23.9 39.5 17.9 11 69.0 31. 6.0 20.9 3.5 15.7 10 77.3 35.1 51.5 23. 3.6 17.5 Sch 5S 90.9 1.3 60.6 27.5 5.5 20.6 Sch 10S 103. 7.0 69.0 31.3 51.7 23.5 11 7.5 39. 5.3 26. 3.7 19. 10 97.9.5 65.3 29.6.9 22.2 Sch 5S 115.2 52. 76. 3. 57.6 26.1 Sch 10S 131.1 59.6 7. 39.6 65.5 29.7 10 120.9 55.0 0.6 36.6 60.5 27. 1/'' 21.7 97.6 13.2 6.9 107..7 Sch 5S 161.6 73. 107.7.9 0. 36.6 Sch 10S 17.6 5.3 125.0 56.7 93. 2.5 10 17.3 79.2 116.2 52.7 7.2 39.5 3/16'' 233.0 105.9 155. 70.5 116.5 52.9 Sch 5S 270.6 123.0 10. 1. 135.3 61. Sch 10S 309.9 10.9 206.6 93.7 15.9 70.3 3/16'' 36.7 165. 23.1 110.3 12.3 2.7 Sch 5S 5.2 220.6 323.5 16.7 22.6 110.0 Sch 10S 60.3 27.7 02.9 12.7 302.1 137.1 3/16'' 3.1 199.1 292.1 132.5 219.0 99. Sch 5S 699.7 31.0 66.5 211.6 39. 15.7 Sch 10S 71.7 396.2 51.1 263.6 35.9 197.7 3/16'' 716.1 325.5 77. 216.5 35.0 162. 1/'' 953.3 33.3 635.5 2.3 76.7 216.2 5/16'' 119.9 50. 793.2 359. 59.9 269.9 3/16'' 935. 25. 623.9 23.0 67.9 212.2 1/'' 126.1 566. 30.7 376. 623.0 22.6 5/16'' 1555.6 707.1 1037.0 70. 777. 352. 3-6 c.
Mitred Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow C Ga / Sch 1 0.07 2.0 3 76 3.500 9 11 0.125 3.2 Sch 5S 0.03 2.1.500 11 3.000 76 1.75 Sch 10S 0.120 3.0 1 0.07 2.0 102.500 11 11 0.125 3.2 Sch 5S 0.03 2.1 6.000 152.000 102 2.500 6 Sch 10S 0.120 3.0 1 0.07 2.0 5 127 5.563 11 11 0.125 3.2 Sch 5S 0.109 2. 7.500 191 5.000 127 3.120 79 Sch 10S 0.13 3. 1 0.07 2.0 6 152 6.625 16 11 0.125 3.2 Sch 5S 0.109 2. 9.000 229 6.000 152 3.750 95 Sch 10S 0.13 3. 1 0.07 2.0 203.625 219 11 0.125 3.2 Sch 5S 0.109 2. 12.000 305.000 203 5.000 127 Sch 10S 0.1 3. 11 0.125 3.2 10 25 10.750 273 Sch 5S 0.13 3. 15.000 31 10.000 25 6.250 159 Sch 10S 0.165.2 11 0.125 3.2 12 305 12.750 32 Sch 5S 0.156.0 1.000 57 12.000 305 7.500 191 Sch 10S 0.10.6 11 0.125 3.2 1 356 1.000 356 Sch 5S 0.156.0 21.000 533 1.000 356.750 222 Sch 10S 0.1. 11 0.125 3.2 16 06 16.000 06 10 0.10 3.6 Sch 5S 0.165.2 2.000 610 16.000 06 10.000 25 Sch 10S 0.1. 11 0.125 3.2 1 57 1.000 57 10 0.10 3.6 Sch 5S 0.165.2 27.000 66 1.000 57 11.250 26 Sch 10S 0.1. 10 0.10 3.6 20 50 20.000 50 1/'' 0.250 6. Sch 5S 0.1. 30.000 762 20.000 50 12.500 31 Sch 10S 0.21 5.5 10 0.10 3.6 2 610 2.000 610 3/16'' 0.1. Sch 5S 0.21 5.5 36.000 91 2.000 610 15.000 31 Sch 10S 0.250 6. 3/16'' 0.1. 30 762 30.000 762 Sch 5S 0.250 6. 5.000 113 30.000 762 1.750 76 Sch 10S 0.312 7.9 3/16'' 0.1. 36 91 36.000 91 Sch 5S 0.250 6. 5.000 1372 36.000 91 22.500 572 Sch 10S 0.312 7.9 3/16'' 0.1. 2 1067 2.000 1067 1/'' 0.250 6. 63.000 1600 2.000 1067 26.000 660 5/16'' 0.313 7.9 3/16'' 0.1. 1219.000 1219 1/'' 0.250 6. 72.000 129.000 1219 30.000 762 5/16'' 0.313 7.9 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 90 Mitred Elbow Long Radius 90 Mitred Elbow Short Radius C C 5 Mitred Elbow arwick c. 3-7
Reducers SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] Concentric Reducer Eccentric Reducer Ga / Sch lb Kg 1 0.07 2.0 0.9 0. 3 76 3.500 9 11 0.125 3.2 1.3 0.6 3.500 9 Sch 5S 0.03 2.1 0.9 0. Sch 10S 0.120 3.0 1.3 0.6 1 0.07 2.0 1.3 0.6 102.500 11 11 0.125 3.2 2.0 0.9.000 102 Sch 5S 0.03 2.1 1.3 0.6 Sch 10S 0.120 3.0 1.9 0.9 1 0.07 2.0 1.9 0.9 5 127 5.563 11 11 0.125 3.2 3.1 1. 5.000 127 Sch 5S 0.109 2. 2.7 1.2 Sch 10S 0.13 3. 3.3 1.5 1 0.07 2.0 2.6 1.2 6 152 6.625 16 11 0.125 3.2.1 1. 5.500 10 Sch 5S 0.109 2. 3.6 1.6 Sch 10S 0.13 3.. 2.0 1 0.07 2.0 3.6 1.7 203.625 219 11 0.125 3.2 5. 2.6 6.000 152 Sch 5S 0.109 2. 5.1 2.3 Sch 10S 0.1 3. 6.9 3.1 11 0.125 3.2.5 3. 10 25 10.750 273 Sch 5S 0.13 3. 7.000 17 9.1.1 Sch 10S 0.165.2 11.1 5.1 11 0.125 3.2 11.5 5.2 12 305 12.750 32 Sch 5S 0.156.0.000 203 1.3 6.5 Sch 10S 0.10.6 16.5 7.5 11 0.125 3.2 20.5 9.3 1 356 1.000 356 10 0.10 3.6 23.0 10. 13.000 330 Sch 5S 0.156.0 25.6 11.6 Sch 10S 0.1. 30. 1.0 11 0.125 3.2 25.3 11.5 16 06 16.000 06 10 0.10 3.6 2.3 12. 1.000 356 Sch 5S 0.165.2 33.3 15.1 Sch 10S 0.1. 37.9 17.2 11 0.125 3.2 30.5 13.9 1 57 1.000 57 10 0.10 3.6 3.2 15.5 15.000 31 Sch 5S 0.165.2 0.2 1.2 Sch 10S 0.1. 5. 20. 10 0.10 3.6 50.7 23.0 1/'' 0.250 6. 90.0 0. 20 50 20.000 50 20.000 50 Sch 5S 0.1. 67.7 30.7 Sch 10S 0.21 5.5 7.6 35.6 10 0.10 3.6 60.9 27.6 3/16'' 0.1. 1. 36.9 2 610 2.000 610 20.000 50 Sch 5S 0.21 5.5 9.5 2.9 Sch 10S 0.250 6. 10.2 9.1 3/16'' 0.1. 122.2 55. 30 762 30.000 762 Sch 5S 0.250 6. 2.000 610 162.6 73. Sch 10S 0.312 7.9 202.5 91.9 3/16'' 0.1. 16. 66.6 36 91 36.000 91 Sch 5S 0.250 6. 2.000 610 195..6 Sch 10S 0.312 7.9 23.5 110. 3/16'' 0.1. 171. 77. 2 1067 2.000 1067 1/'' 0.250 6. 2.000 610 22.2 103.5 5/16'' 0.313 7.9 2. 129.2 3/16'' 0.1. 22.7 103.7 1219.000 1219 1/'' 0.250 6. 2.000 711 30.5 13.1 5/16'' 0.313 7.9 30.2 172. a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 3- c.
ees & Crosses SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] ee Cross Ga / Sch Po Po lb kg lb kg 1 0.07 2.0 2.5 1.1 3.3 1.5 3 76 3.500 9 11 0.125 3.2 3.9 1. 5.2 2. 3.375 6 Sch 5S 0.03 2.1 2.6 1.2 3.5 1.6 Sch 10S 0.120 3.0 3.7 1.7 5.0 2.3 1 0.07 2.0 3.9 1. 5.2 2. 102.500 11 11 0.125 3.2 6.2 2..2 3.7.125 105 Sch 5S 0.03 2.1.1 1.9 5.5 2.5 Sch 10S 0.120 3.0 5.9 2.7 7.9 3.6 1 0.07 2.0 5.7 2.6 7.6 3. 5 127 5.563 11 11 0.125 3.2 9.1.1 12.1 5.5.75 12 Sch 5S 0.109 2. 7.9 3.6 10.6. Sch 10S 0.13 3. 9.7. 12.9 5.9 1 0.07 2.0 7.9 3.6 10.5.7 6 152 6.625 16 11 0.125 3.2 12.5 5.7 16.7 7.6 5.625 13 Sch 5S 0.109 2. 10.9 5.0 1.6 6.6 Sch 10S 0.13 3. 13. 6.1 17..1 1 0.07 2.0 12. 5. 17.0 7.7 203.625 219 11 0.125 3.2 20.3 9.2 27.1 12.3 7.000 17 Sch 5S 0.109 2. 17..1 23.7 10.7 Sch 10S 0.1 3. 2.0 10.9 32.0 1.5 11 0.125 3.2 30.9 1.0 1.1 1.7 10 25 10.750 273 Sch 5S 0.13 3..500 216 33.0 15.0.1 20.0 Sch 10S 0.165.2 0.6 1. 5.1 2.5 11 0.125 3.2 3.1 19.6 57.5 26.1 12 305 12.750 32 Sch 5S 0.156.0 10.000 25 53.7 2. 71.6 32.5 Sch 10S 0.10.6 61. 2.1 2.5 37. 11 0.125 3.2 52.1 23.7 69.5 31.5 1 356 1.000 356 Sch 5S 0.156.0 11.000 279 6.9 29.5 6.6 39.3 Sch 10S 0.1. 7.1 35. 10.1 7.2 11 0.125 3.2 65.1 29.5 6. 39. 16 06 16.000 06 10 0.10 3.6 72. 33.0 97.1.0 12.000 305 Sch 5S 0.165.2 5.7 3.9 11.3 51. Sch 10S 0.1. 97.5.2 130.0 59.0 11 0.125 3.2 2. 37. 109.9 9.9 1 57 1.000 57 10 0.10 3.6 92.3 1. 123.0 55. 13.500 33 Sch 5S 0.165.2 10.6 9.3 1. 65.7 Sch 10S 0.1. 123.6 56.0 16.7 7.7 10 0.10 3.6 11.0 51.7 152.0 6.9 20 50 20.000 50 1/'' 0.250 6. 202. 91. 269.9 122. 15.000 31 Sch 5S 0.1. 152.3 69.1 203.1 92.1 Sch 10S 0.21 5.5 176. 0.2 235.7 106.9 10 0.10 3.6 155.2 70. 206.9 93.9 2 610 2.000 610 3/16'' 0.1. 207.5 9.1 276.6 125.5 17.000 32 Sch 5S 0.21 5.5 20.9 109.3 321.2 15.7 Sch 10S 0.250 6. 275.9 125.1 367. 166.9 3/16'' 0.1. 336.1 152.5.2 203.3 30 762 30.000 762 Sch 5S 0.250 6. 22.000 559 7.2 202.9 596.3 270.5 Sch 10S 0.312 7.9 557.0 252.6 72.6 336.9 3/16'' 0.1. 6. 220.6 6.5 29.1 36 91 36.000 91 Sch 5S 0.250 6. 26.500 673 67.3 293.6 63.1 391.5 Sch 10S 0.312 7.9 06.5 365. 1075.3 7. 3/16'' 0.1. 600.0 272.2 00.0 362.9 2 1067 2.000 1067 1/'' 0.250 6. 2.000 711 79. 362.3 1065.0 3.1 5/16'' 0.312 7.9 995. 51.5 1327.2 602.0 3/16'' 0.1. 0.6 366. 107.1 9.0 1219.000 1219 1/'' 0.250 6. 33.000 3 1076.7. 135.6 651.2 5/16'' 0.312 7.9 132.0 60.7 179.3 11.6 ee ee with reinforcement a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. Note: 1. he addition of reinforcement may be necessary. Upon request, the verification can be performed by arwick, please contact a technical representative for more information. Cross [Note (1)] arwick c. 3-9
Laterals SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] C C 5 Lateral C 5 Lateral with reinforcement Ga / Sch lb kg 1 0.07 2.0 5.6 2.5 3 76 3.500 9 11 0.125 3.2..0 3.000 76 10.000 25 13.000 330 Sch 5S 0.03 2.1 5.9 2.7 Sch 10S 0.120 3.0.5 3.9 1 0.07 2.0.5 3. 102.500 11 11 0.125 3.2 13.5 6.1 3.000 76 12.000 305 15.000 31 Sch 5S 0.03 2.1 9.0.1 Sch 10S 0.120 3.0 12.9 5.9 1 0.07 2.0 11.9 5. 5 127 5.563 11 11 0.125 3.2 1.9.6 3.500 9 13.500 33 17.000 32 Sch 5S 0.109 2. 16.5 7.5 Sch 10S 0.13 3. 20.2 9.2 1 0.07 2.0 15.1 6.9 6 152 6.625 16 11 0.125 3.2 2.1 10.9 3.500 9 1.500 36 1.000 57 Sch 5S 0.109 2. 21.0 9.5 Sch 10S 0.13 3. 25. 11.7 1 0.07 2.0 2.0 10.9 203.625 219 11 0.125 3.2 3.2 17.3.500 11 17.500 5 22.000 559 Sch 5S 0.109 2. 33. 15.2 Sch 10S 0.1 3. 5.1 20.5 11 0.125 3.2 55.7 25.2 10 25 10.750 273 Sch 5S 0.13 3. 5.000 127 20.500 521 25.500 6 59.6 27.0 Sch 10S 0.165.2 73.2 33.2 11 0.125 3.2 7. 35.5 12 305 12.750 32 Sch 5S 0.156.0 5.500 10 2.500 622 30.000 762 97.6.2 Sch 10S 0.10.6 112.3 51.0 11 0.125 3.2 9. 3.0 1 356 1.000 356 Sch 5S 0.156.0 6.000 152 27.000 66 33.000 3 11.1 53.5 Sch 10S 0.1. 11.9 6. 11 0.125 3.2 120.2 5.5 16 06 16.000 06 10 0.10 3.6 13.5 61.0 6.500 165 30.000 762 36.500 927 Sch 5S 0.165.2 15.3 71. Sch 10S 0.1. 10.1 1.7 11 0.125 3.2 1.5 65.6 1 57 1.000 57 10 0.10 3.6 161.7 73. 7.000 17 32.000 13 39.000 991 Sch 5S 0.165.2 190. 6.3 Sch 10S 0.1. 216.6 9.3 10 0.10 3.6 197.6 9.6 20 50 20.000 50 1/'' 0.250 6. 350.9 159.2.000 203 35.000 9 3.000 1092 Sch 5S 0.1. 26.0 119.7 Sch 10S 0.21 5.5 306.5 139.0 10 0.10 3.6 273.9 12.2 2 610 2.000 610 3/16'' 0.1. 366.1 166.1 9.000 229 0.500 1029 9.500 1257 Sch 5S 0.21 5.5 25.1 192. Sch 10S 0.250 6. 6. 220. 3/16'' 0.1. 550.0 29.5 30 762 30.000 762 Sch 5S 0.250 6. 10.000 25 9.000 125 59.000 199 731. 331.9 Sch 10S 0.312 7.9 911. 13. 3/16'' 0.1. 0.9 399.6 36 91 36.000 91 Sch 5S 0.250 6. 2.000 610 60.000 152.000 213 1172.5 531.9 Sch 10S 0.312 7.9 160. 662.6 3/16'' 0.1. 1171. 531.3 2 1067 2.000 1067 1/'' 0.250 6. 26.000 660 69.000 1753 95.000 213 1559.5 707. 5/16'' 0.312 7.9 193. 1.5 3/16'' 0.1. 17.3 670.6 1219.000 1219 1/'' 0.250 6. 27.000 66 77.000 1956 10.000 262 196.5 92.9 5/16'' 0.312 7.9 253.5 1112.9 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 3-10 c.
Wyes SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] Ga / Sch lb kg 1 0.07 2.0 3. 1.5 3 76 3.500 9 11 0.125 3.2 5. 2. 5.500 10 3.000 76 Sch 5S 0.03 2.1 3.6 1.6 Sch 10S 0.120 3.0 5.2 2.3 1 0.07 2.0 5.0 2.3 102.500 11 11 0.125 3.2.0 3.6 6.500 165 3.000 76 Sch 5S 0.03 2.1 5.3 2. Sch 10S 0.120 3.0 7.7 3.5 1 0.07 2.0 7.2 3.3 5 127 5.563 11 11 0.125 3.2 11.5 5.2 7.500 191 3.500 9 Sch 5S 0.109 2. 10.0.5 Sch 10S 0.13 3. 12.3 5.6 1 0.07 2.0 9.1.1 6 152 6.625 16 11 0.125 3.2 1. 6.5.000 203 3.500 9 Sch 5S 0.109 2. 12.6 5.7 Sch 10S 0.13 3. 15.5 7.0 1 0.07 2.0 13.7 6.2 203.625 219 11 0.125 3.2 21. 9.9 9.000 229.500 11 Sch 5S 0.109 2. 19.0.6 Sch 10S 0.1 3. 25.7 11.7 11 0.125 3.2 32.7 1. 10 25 10.750 273 Sch 5S 0.13 3. 11.000 279 5.000 127 35.0 15.9 Sch 10S 0.165.2 3.0 19.5 11 0.125 3.2 2. 19.2 12 305 12.750 32 Sch 5S 0.156.0 12.000 305 5.500 10 52. 2.0 Sch 10S 0.10.6 60. 27.6 11 0.125 3.2 53.7 2. 1 356 1.000 356 Sch 5S 0.156.0 1.000 356 6.000 152 66.9 30.3 Sch 10S 0.1. 0. 36.5 11 0.125 3.2 66.0 29.9 16 06 16.000 06 10 0.10 3.6 73. 33.5 15.000 31 6.500 165 Sch 5S 0.165.2 6.9 39. Sch 10S 0.1. 9.9. 11 0.125 3.2 1. 36.9 1 57 1.000 57 10 0.10 3.6 91.1 1.3 16.500 19 7.000 17 Sch 5S 0.165.2 107.2.6 Sch 10S 0.1. 122.0 55. 10 0.10 3.6 111.5 50.6 20 50 20.000 50 1/'' 0.250 6. 197.9 9. 1.000 57.000 203 Sch 5S 0.1. 1.9 67.5 Sch 10S 0.21 5.5 172.9 7. 10 0.10 3.6 161.3 73.2 2 610 2.000 610 3/16'' 0.1. 215.6 97. 22.000 559 9.000 229 Sch 5S 0.21 5.5 250.3 113.6 Sch 10S 0.250 6. 26.7 130.0 3/16'' 0.1. 305.6 13.6 30 762 30.000 762 Sch 5S 0.250 6. 25.000 635 10.000 25 06.6 1. Sch 10S 0.312 7.9 506.3 229.7 3/16'' 0.1. 9. 222.0 36 91 36.000 91 Sch 5S 0.250 6. 2.000 711 2.000 610 651. 295.5 Sch 10S 0.312 7.9 11.6 36.1 3/16'' 0.1. 62.5 25.1 2 1067 2.000 1067 1/'' 0.250 6. 31.000 77 26.000 660 36. 379.6 5/16'' 0.312 7.9 102. 73.0 3/16'' 0.1. 775.9 352.0 1219.000 1219 1/'' 0.250 6. 3.000 6 27.000 66 1033.2 6.7 5/16'' 0.312 7.9 127. 5.1 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. e. he addition of reinforcement may be necessary. Upon request, the verification can be performed by, please contact a technical representative for more information. arwick c. 3-11
Pressed Collars SM 77 Nominal Pipe Size Outside Diameter [Noninal hickness] lb kg Pressed Collars 1 1/2 3 1.900 1/'' 0.125 3.2 2.75 73 0.625 16 0.2 0.1 2 51 2.375 60 1/'' 0.125 3.2 3.500 9 0.625 16 0.3 0.1 2 1/2 6 2.75 73 1/'' 0.125 3.2.500 11 0.625 16 0. 0.2 3 76 3.500 9 1/'' 0.125 3.2 5.000 127 0.625 16 0.6 0.3 102.500 11 1/'' 0.125 3.2 6.500 165 0.625 16 0.9 0. 5 127 5.563 11 1/'' 0.125 3.2 7.500 191 0.625 16 1.0 0.5 6 152 6.625 16 1/'' 0.125 3.2.500 216 0.625 16 1.3 0.6 203.625 219 1/'' 0.125 3.2 10.750 273 0.625 16 1.9 0.9 10 25 10.750 273 1/'' 0.125 3.2 13.000 330 0.625 16 2.5 1.1 12 305 12.750 32 1/'' 0.125 3.2 15.000 31 0.625 16 3.5 1.6 Long Neck Collars ype ''C'' C Nominal Pipe Size Outside Diameter [Nominal hickness] Sch lb kg 2 51 2.500 6 10S 0.109 2. 3.625 92 2.500 6 0.9 0. 3 76 3.500 9 10S 0.120 3.0 5.000 127 2.500 6 1.3 0.6 102.500 11 10S 0.120 3.0 6.1 157 3.000 76 2.0 0.9 6 152 6.625 16 10S 0.13 3..500 216 3.500 9 3. 1.7 203.625 219 10S 0.13 3. 10.750 273.000 102 5. 2.6 10 25 10.750 273 10S 0.1 3. 13.000 330 5.000 127 9.9.5 C a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. 3-12 c.
ngle Collars SM 77 Nominal Pipe Size Outside Diameter ngle Dimensions -C-. lb kg 3 76 3.500 9 3.563 90 3/ x 3/ x 1/ 19 x 19 x 3.2 0.5 0.2 102.500 11.563 116 1 x 1 x 1/ 25 x 25 x 3.2 0.9 0. 5 127 5.563 11 5.625 13 1 x 1 x 1/ 25 x 25 x 3.2 1.2 0.5 6 10 12 1 16 1 20 2 30 36 2 152 203 25 305 356 06 57 50 610 762 91 1067 1219 6.625.625 10.750 12.750 1.000 16.000 1.000 20.000 2.000 30.000 36.000 2.000.000 16 219 273 32 356 06 57 50 610 762 91 1067 1219 6.6.750 10.75 12.75 1.09 16.125 1.125 20.125 2.125 30.125 36.125 2.125.125 170 222 276 327 35 10 60 511 613 765 91 1070 1222 1 x 1 x 1/ 1 1/ x 1 1/ x 1/ 1 1/ x 1 1/ x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 2 x 2 x 3/16 2 x 2 x 1/ 2 x 2 x 1/ 2 1/2 x 2 1/2 x 1/ 2 1/2 x 2 1/2 x 1/ 25 x 25 x 3.2 32 x 32 x 3.2 32 x 32 x 3.2 3 x 3 x 3.2 3 x 3 x 3.2 3 x 3 x. 3 x 3 x. 3 x 3 x. 51 x 51 x. 51 x 51 x 6.3 51 x 51 x 6.3 6 x 6 x 6.3 6 x 6 x 6.3 1. 2.3 2..1.5 7.5.5 9. 15.3 2.9 3.5.9 51. 0.6 1.0 1.3 1.9 2.0 3. 3..3 6.9 11.3 17.5 20. 23.3 1 x 1 x 3/16 1 1/ x 1 1/ x 3/16 1 1/ x 1 1/ x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 2 x 2 x 1/ 2 x 2 x 3/ 2 x 2 x 3/ 2 1/2 x 2 1/2 x 3/ 2 1/2 x 2 1/2 x 3/ 25 x 25 x. 32 x 32 x. 32 x 32 x. 3 x 3 x. 3 x 3 x. 3 x 3 x 6.3 3 x 3 x 6.3 3 x 3 x 6.3 51 x 51 x 6.3 51 x 51 x 9.5 51 x 51 x 9.5 6 x 6 x 9.5 6 x 6 x 9.5 2.0 3..2 6.0 6.6 9.7 11.0 12.2 19.9 36.6 6.6 75. 6.3 0.9 1.5 1.9 2.7 3.0. 5.0 5.5 9.0 16.6 29.3 3.2 39.1 C utt Weld ngle Collars (Use with acking Flanges) P. 3-1 Slip-on ngle Collars (Use with Slip-on acking Flanges) P. 3-15 a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 3-13
acking Flanges I.D. Nominal Pipe Size I.D. # of holes lb kg 1 1/2 5.00 2.150 3.75 0.625 0.750 3.6 3 127 55 9 16 19 1.6 2 6.000 2.625.750 0.750 0.750.7 51 152 67 121 19 19 2.1 2 1/2 7.000 3.125 5.500 0.750 0.750 6.2 6 17 79 10 19 19 2. 3 7.500 3.75 6.000 0.750 0.750 7.1 76 191 9 152 19 19 3.2 9.000.75 7.500 0.750 0.750 9.5 102 229 12 191 19 19.3 5 10.000 5.93.500 0.75 0.750 10.7 127 25 151 216 22 19.9 6 11.000 7.000 9.500 0.75 0.750 12.3 152 279 17 21 22 19 5.6 13.500 9.000 11.750 0.75 0.750 17.7 203 33 229 29 22 19.0 10 16.000 11.250 1.250 1.000 1.000 30.2 12 25 06 26 362 25 25 13.7 12 19.000 13.250 17.000 1.000 1.000 3.5 12 305 3 337 32 25 25 19.7 1 21.000 1.500 1.750 1.125 1.125 55.0 12 356 533 36 76 29 29 2.9 16 23.500 16.500 21.250 1.125 1.125 66.0 16 06 597 19 50 29 29 29.9 1 25.000 1.500 22.750 1.250 1.250 1. 16 57 635 70 57 32 32 36.9 20 27.500 20.500 25.000 1.250 1.250 6.3 20 50 699 521 635 32 32 39.1 2 32.000 2.500 29.500 1.375 1.375 121.0 20 610 13 622 79 35 35 5.9 30 3.750 30.625 36.000 1.375 1.625 176.0 2 762 9 77 91 35 1 79. 36 6.000 36.625 2.750 1.625 1.625 237.0 32 91 116 930 106 1 1 107.5 2 53.000 2.625 9.500 1.625 1.750 337.0 36 1067 136 103 1257 1 152.9 59.500.625 56.000 1.625 2.000 55.0 1219 1511 1235 122 1 51 206. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. 3-1 c.
Slip-on Flanges Nominal Pipe Size I.D. # of holes lb kg 3 7.500.1 6.000 0.750 0.750 7.1 76 191 106 152 19 19 3.2 9.000 5.1 7.500 0.750 0.750 9.5 102 229 132 191 19 19.3 5 10.000 6.250.500 0.75 0.750 10.7 127 25 159 216 22 19.9 6 11.000 7.313 9.500 0.75 0.750 12.3 152 279 16 21 22 19 5.6 13.500 9.313 11.750 0.75 0.750 17.7 203 33 237 29 22 19.0 10 16.000 11.563 1.250 1.000 1.000 30.2 12 25 06 29 362 25 25 13.7 12 19.000 13.563 17.000 1.000 1.000 3.5 12 305 3 3 32 25 25 19.7 1 21.000 1.13 1.750 1.125 1.125 55.0 12 356 533 376 76 29 29 2.9 16 23.500 16.93 21.250 1.125 1.125 66.0 16 06 597 30 50 29 29 29.9 1 25.000 19.000 22.750 1.250 1.250 1. 16 57 635 3 57 32 32 36.9 20 27.500 21.000 25.000 1.250 1.250 6.3 20 50 699 533 635 32 32 39.1 2 32.000 25.000 29.500 1.375 1.375 121.0 20 610 13 635 79 35 35 5.9 30 3.750 31.250 36.000 1.375 1.625 176.0 2 762 9 79 91 35 1 79. 36 6.000 37.250 2.750 1.625 1.625 237.0 32 91 116 96 106 1 1 107.5 2 53.000 3.250 9.500 1.625 1.750 337.0 36 1067 136 1099 1257 1 152.9 59.500 9.250 56.000 1.625 2.000 55.0 1219 1511 1251 122 1 51 206. I.D. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 3-15
ride pleine lind Flanges 1/16'' C Nominal Diameter # of C holes lb kg 1 1/2 5.000 3.75 0.625 3.000 0.750.3 3 127 9 16 76 19 2.0 2 6.000.750 0.750 3.500 0.750 6.2 51 152 121 19 9 19 2. 2 1/2 7.000 5.500 0.750.500 0.750.5 6 17 10 19 11 19 3.9 3 7.500 6.000 0.750 5.000 0.750 9. 76 191 152 19 127 19. 9.000 7.500 0.750 6.500 0.750 1.0 102 229 191 19 165 19 6. 5 10.000.500 0.75 7.375 0.750 17.6 127 25 216 22 17 19.0 6 11.000 9.500 0.75.375 0.750 21.0 152 279 21 22 213 19 9.5 13.500 11.750 0.75 10.625 0.750 32.2 203 33 29 22 270 19 1.6 10 16.000 1.250 1.000 13.000 1.000 5.0 12 25 06 362 25 330 25 26.3 12 19.000 17.000 1.000 15.625 1.000 3.1 12 305 3 32 25 397 25 37.7 1 21.000 1.750 1.125 17.250 1.125 113.0 12 356 533 76 29 3 29 51.3 16 23.500 21.250 1.125 19.750 1.125 12.0 16 06 597 50 29 502 29 6. 1 25.000 22.750 1.250 21.125 1.250 179.0 16 57 635 57 32 537 32 1.2 20 27.500 25.000 1.250 23.375 1.250 217.5 20 50 699 635 32 59 32 9.7 2 32.000 29.500 1.375 27.750 1.375 323.0 20 610 13 79 35 705 35 16.5 30 3.750 36.000 1.375 3.250 1.500 530.0 2 762 9 91 35 70 3 20. 36 6.000 2.750 1.625 0.750 1.500 755.0 32 91 116 106 1 1035 3 32.5 2 53.000 9.500 1.625 6.750 1.500 906.0 36 1067 136 1257 1 117 3 11.0 59.500 56.000 1.625 52.750 1.750 133.0 1219 1511 122 1 130 605.1 a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105 and 316L Stainless Steel linner. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. 3-16 c.
Pipe, Fitttings and Flanges. SM 312, 03, 12. SME S-312, S-03, S-12. Specifications suary Pipes, fittings and flanges in this section are usually intended for high-temperature and general corrosive operations. With our cutting edge technology equipment our pipes and fittings offer an excellent price/quality ratio. ll our pipes and fittings are manufactured, heat treated, inspected, tested, and marked according to the requirements of the respective specifications, thereafter a Manufacturer est Report is issued for each batch. pipes and fittings are made from base materials SM -20-30L & 316L; other alloys are available upon request. his section includes: - SM 312 and SME S-312 welded pipes [Note (1 and 2)] - SM 03 and SME S-03 fittings Grade WP, Class-S, W, WX and WU (See able 1 for a brief description of the class) - SM 12 and SME S-12 stainless steel flanges - SM 105 and SME S-105 carbon steel galvanized lap-joint flange [Nominal Pipe Size] diameter and thickness [Note ()] pipes and fittings are governed by SME 36.19 he maximum allowable operating pressure for pipes shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. he dimensions of the fittings are governed by SME 16.9 he fittings are supplied with bevelled ends. he maximum allowable working pressure for fittings WP is equivalent to the one for pipes of the same category (e.g.: ype of construction, diameter, thickness, chemical and mechanical requirements). Dimensions and maximum allowable working pressure for flanges are shown inside the SME 16.5 Notes: 1. SM 312 and SME S-312 seamless pipes can be provided upon request. 2. SM 269 and SM 09 pipes can be supplied upon request. 3. Non-destructive examination is not performed on class'' W'' fittings when the welding process is done without filler addition.. accordance with specifications SM 312 / SME S-312 and SM 03 / SME S-03 allowable tolerance will never be less than 7.5% of the nominal thickness at any measured point. Grade Class Construction Nondestructif Examination WP S Seamless None WP W Welded Radiography or Ultrasonic (3) WP WX Welded Radiography WP WU Welded Ultrasonic able 1 arwick c. -1
Pipe SM 312 & SME S-312 Nominal Pipe Size Outside Diameter Nominal hickness and Schedule 5S Schedule 10S Schedule 0S lb / ft kg / m lb / ft kg / m lb / ft kg / m 3/ 19 1.050 27 0.065 1.7 0.7 1.0 0.03 2.1 0.9 1.3 0.113 2.9 1.2 1.7 1 25 1.315 33 0.065 1.7 0.9 1.3 0.109 2. 1. 2.1 0.133 3. 1.7 2.6 1 1/ 32 1.660 2 0.065 1.7 1.1 1.7 0.109 2. 1. 2. 0.10 3.6 2.3 3.5 1 1/2 3 1.900 0.065 1.7 1.3 1.9 0.109 2. 2.1 3.2 0.15 3.7 2..1 2 51 2.375 60 0.065 1.7 1.6 2. 0.109 2. 2.7.0 0.15 3.9 3.7 5.6 2 1/2 6 2.75 73 0.03 2.1 2.5 3. 0.120 3.0 3.6 5. 0.203 5.2 5.9. 3 76 3.500 9 0.03 2.1 3.1.6 0.120 3.0. 6.6 0.216 5.5 7. 11.6 102.500 11 0.03 2.1.0 6.0 0.120 3.0 5.7.6 0.237 6.0 11.0 16.5 5 127 5.563 11 0.109 2. 6.5 9.7 0.13 3..0 11.9 0.25 6.6 15.0 22.3 6 152 6.625 16 0.109 2. 7. 11.6 0.13 3. 9.5 1.2 0.20 7.1 19. 29.0 203.625 219 0.109 2. 10.1 15.1 0.1 3. 13.7 20. 0.322.2 29.2 3.6 10 25 10.750 273 0.13 3. 15.6 23.2 0.165.2 19.1 2.5 0.365 9.3 1. 61. 12 305 12.750 32 0.156.0 21.5 32.0 0.10.6 2.7 36.9 0.375 9.5 50.7 75.6 1 356 1.000 356 0.156.0 23.6 35.2 0.1. 2. 2.3 0.375 9.5 55.9 3.3 16 06 16.000 06 0.165.2 2.6 2.6 0.1. 32.5.5 0.375 9.5 6.1 95.5 1 57 1.000 57 0.165.2 32.2.0 0.1. 36.6 5.6 0.375 9.5 72.3 107.7 20 50 20.000 50 0.1. 0.6 60.6 0.21 5.5 7.1 70.3 0.375 9.5 0.5 120.0 2 610 2.000 610 0.21 5.5 56.7.5 0.250 6. 6.9 96. 0.375 9.5 96.9 1. a. Nominal diameter and thickness: ccording to SME 36.19 b. hickness olerance: ccording to / S-312 will never be less than 7.5% of the nominal thickness. c. Material: Stainless Steel P-30L and P-316L, other alloys are available upon request. d. Maximum operating pressure: Must be calculated using the latest version of the applicable SME code. arwick c. -3
90 Elbows SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 1 Sch lb kg lb kg 1 90 Elbow (Short Radius) 90 Elbow (Short Radius) 5S 0.065 1.7 0. 0.2 0.3 0.1 1 1/2 3 1.900 10S 0.109 2. 2.250 57 0.6 0.3 1.500 3 0. 0.2 0S 0.15 3.7 0. 0. 0.5 0.2 5S 0.065 1.7 0.6 0.3 0. 0.2 2 51 2.375 60 10S 0.109 2. 3.000 76 1.1 0.5 2.000 51 0.7 0.3 0S 0.15 3.9 1.5 0.7 1.0 0. 5S 0.03 2.1 1.2 0.6 0. 0. 2 1/2 6 2.75 73 10S 0.120 3.0 3.750 95 1. 0. 2.500 6 1.2 0.5 0S 0.203 5.2 2.9 1.3 1.9 0.9 5S 0.03 2.1 1. 0. 1.2 0.6 3 76 3.500 9 10S 0.120 3.0.500 11 2.6 1.2 3.000 76 1.7 0. 0S 0.216 5.5.6 2.1 3.0 1. 5S 0.03 2.1 3.1 1. 2.1 1.0 102.500 11 10S 0.120 3.0 6.000 152.5 2.0.000 102 3.0 1. 0S 0.237 6.0.7 3.9 5. 2.6 5S 0.109 2. 6. 2.9.3 1.9 5 127 5.563 11 10S 0.13 3. 7.500 191 7. 3.5 5.000 127 5.2 2. 0S 0.25 6.6 1.7 6.7 9.. 5S 0.109 2. 9.1.1 6.1 2. 6 152 6.625 16 10S 0.13 3. 9.000 229 11.2 5.1 6.000 152 7.5 3. 0S 0.20 7.1 22.9 10. 15.3 6.9 5S 0.109 2. 15.9 7.2 10.6. 203.625 219 10S 0.1 3. 12.000 305 21.5 9..000 203 1. 6.5 0S 0.322.2 5.9 20. 30.6 13.9 5S 0.13 3. 30.5 13.9 20. 9.2 10 25 10.750 273 10S 0.165.2 15.000 31 37.5 17.0 10.000 25 25.0 11.3 0S 0.365 9.3 1. 36.9 5.2 2.6 5S 0.156.0 50.6 23.0 33.7 15.3 12 305 12.750 32 10S 0.10.6 1.000 57 5.3 26. 12.000 305 3.9 17.6 0S 0.375 9.5 119.5 5.2 79.7 36.1 5S 0.156.0 6.9 29. 3.3 19.6 1 356 1.000 356 10S 0.1. 21.000 533 7.0 35. 1.000 356 52.0 23.6 0S 0.375 9.5 153.6 69.7 102. 6. 5S 0.165.2 9.7 0.7 59. 27.1 16 06 16.000 06 10S 0.1. 2.000 610 102.1 6.3 16.000 06 6.1 30.9 0S 0.375 9.5 201.2 91.3 13.2 60.9 5S 0.165.2 113.7 51.6 75. 3. 1 57 1.000 57 10S 0.1. 27.000 66 129. 5.7 1.000 57 6.3 39.1 0S 0.375 9.5 255. 115. 170.3 77.2 5S 0.1. 159.9 72.5 106.6. 20 50 20.000 50 10S 0.21 5.5 30.000 762 15.1.0 20.000 50 123. 56.0 0S 0.375 9.5 316.0 13.3 210.6 95.5 5S 0.21 5.5 267.1 121.2 17.1 0. 2 610 2.000 610 10S 0.250 6. 36.000 91 305.9 13. 2.000 610 203.9 92.5 0S 0.375 9.5 56. 207.0 30.3 1.0 a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. - c.
5 Elbows SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] Sch Po lb kg 1 1/2 3 1.900 2 51 2.375 60 2 1/2 6 2.75 73 3 76 3.500 9 102 5 127.500 11 5.563 11 6 152 6.625 16 203.625 219 10 25 10.750 273 12 305 12.750 32 1 356 1.000 356 16 06 16.000 06 1 57 1.000 57 20 50 20.000 50 2 610 2.000 610 5S 0.065 1.7 0.2 0.1 10S 0.109 2. 1.125 29 0.3 0.1 0S 0.15 3.7 0. 0.2 5S 0.065 1.7 0.3 0.1 10S 0.109 2. 1.375 35 0.5 0.2 0S 0.15 3.9 0.7 0.3 5S 0.03 2.1 0.6 0.3 10S 0.120 3.0 1.750 0.9 0. 0S 0.203 5.2 1.5 0.7 5S 0.03 2.1 0.9 0. 10S 0.120 3.0 2.000 51 1.3 0.6 0S 0.216 5.5 2.3 1.0 5S 0.03 2.1 1.6 0.7 10S 0.120 3.0 2.500 6 2.3 1.0 0S 0.237 6.0.3 2.0 5S 0.109 2. 3.2 1. 10S 0.13 3. 3.120 79 3.9 1. 0S 0.25 6.6 7.3 3.3 5S 0.109 2..6 2.1 10S 0.13 3. 3.750 95 5.6 2.5 0S 0.20 7.1 11. 5.2 5S 0.109 2..0 3.6 10S 0.1 3. 5.000 127 10..9 0S 0.322.2 23.0 10. 5S 0.13 3. 15.3 6.9 10S 0.165.2 6.250 159 1.7.5 0S 0.365 9.3 0.7 1.5 5S 0.156.0 25.3 11.5 10S 0.10.6 7.500 191 29.1 13.2 0S 0.375 9.5 59. 27.1 5S 0.156.0 32.5 1.7 10S 0.1..750 222 39.0 17.7 0S 0.375 9.5 76. 3. 5S 0.165.2.9 20. 10S 0.1. 10.000 25 51.0 23.2 0S 0.375 9.5 100.6 5.6 5S 0.165.2 56.9 25. 10S 0.1. 11.250 26 6.7 29.3 0S 0.375 9.5 127.7 57.9 5S 0.1. 0.0 36.3 10S 0.21 5.5 12.500 31 92.6 2.0 0S 0.375 9.5 15.0 71.7 5S 0.21 5.5 133.6 60.6 10S 0.250 6. 15.000 31 152.9 69. 0S 0.375 9.5 22.2 1.0 a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. -5
ees SM 03 & SME S-03 Nominal Pipe Size Run Nominal Pipe Size Outlet C lb kg lb kg 1/2 13 0.0 21 2.250 57 1.3 0.6 2.0 0.9 3/ 19 1.050 27 2.250 57 1. 0.6 2.1 1.0 1 1/2 3 1.900 1 25 1.315 33 2.250 57 2.250 57 0.109 2. 1.5 0.7 0.15 3.7 1.2 0.5 1 1/ 32 1.660 2 2.250 57 1.5 0.7 2.3 1.0 1 1/2 3 1.900 2.250 57 1.5 0.7 2.3 1.0 3/ 19 1.050 27 1.750 1. 0.6 3.3 1.5 1 25 1.315 33 2.000 51 1.7 0. 3.5 1.6 2 51 2.375 60 1 1/ 32 1.660 2 2.500 6 2.250 57 0.109 2. 1.7 0. 0.15 3.9 3.6 1.6 1 1/2 3 1.900 2.375 60 1. 0. 3. 1.7 2 51 2.375 60 2.500 6 1. 0. 3. 1.7 1 25 1.315 33 2.250 57 2.5 1.1 5.0 2.3 1 1/ 32 1.660 2 2.500 6 2.6 1.2 5.3 2. 2 1/2 6 2.75 73 1 1/2 3 1.900 3.000 76 2.625 67 0.120 3.0 2.7 1.2 0.203 5.2 5.5 2.5 2 51 2.375 60 2.750 70 3.0 1. 6.0 2.7 2 1/2 6 2.75 73 3.000 76 3.0 1. 6.0 2.7 1 1/ 32 1.660 2 2.750 70 3.6 1.6 6.3 2. 1 1/2 3 1.900 2.75 73 3.7 1.7 6.3 2. 3 76 3.500 9 2 51 2.375 60 3.375 6 3.000 76 0.120 3.0 3. 1.7 0.216 5.5 6.5 2.9 2 1/2 6 2.75 73 3.250 3 3.9 1. 6. 3.1 3 76 3.500 9 3.375 6 3.9 1. 7.0 3.2 1 1/2 3 1.900 3.375 6 5. 2. 11.1 5.0 2 51 2.375 60 3.500 9 5. 2.5 11.2 5.1 102.500 11 2 1/2 6 2.75 73.125 105 3.750 95 0.120 3.0 5.5 2.5 0.237 6.0 11.3 5.1 3 76 3.500 9 3.75 9 5.6 2.5 11.6 5.3 9.500 11.125 105 5.7 2.6 12.0 5. 2 51 2.375 60.125 105 10..9 19.0.6 2 1/2 6 2.75 73.250 10 11.1 5.0 19.5. 5 127 5.563 11 3 76 3.500 9.75 12.375 111 0.13 3. 11. 5.2 0.25 6.6 20.0 9.1 102.500 11.625 117 12.0 5. 21.0 9.5 5 127 5.563 11.75 12 12.0 5. 21.5 9. 2 1/2 6 2.75 73.750 121 15.7 7.1 32.0 1.5 3 76 3.500 9.75 12 16.0 7.3 32.5 1.7 6 152 6.625 16 102.500 11 5.625 13 5.125 130 0.13 3. 16.5 7.5 0.20 7.1 33.5 15.2 5 127 5.563 11 5.375 137 17.0 7.7 3.5 15.6 6 152 6.625 16 5.625 13 17.0 7.7 35.0 15.9 102.500 11 6.125 156 23.9 10. 51.7 23.5 203.625 219 5 127 5.563 11 6.375 162 2.5 11.1 53.0 2.0 7.000 17 0.1 3. 0.322.2 6 152 6.625 16 6.625 16 25.0 11.3 5.0 2.5 203.625 219 7.000 17 25.0 11.3 55.0 2.9 M SCH 10S SCH 0S M M C C C C Straight ee Reducing ee -6 c.
ees SM 03 & SME S-03 Nominal Pipe Size Run Nominal Pipe Size Outlet C SCH 10S SCH 0S lb kg lb kg 102.500 11 7.250 1 30.1 13.7 0.0 36.3 5 127 5.563 11 7.500 191 32.3 1.7 1.0 36.7 10 25 10.750 273 6 152 6.625 16.500 216 7.625 19 0.165.2 36.3 16.5 0.365 9.3 3.0 37.6 203.625 219.000 203 37.0 16..5 3.3 10 25 10.750 273.500 216 37.0 16. 5.0 3.6 5 127 5.563 11.500 216 9. 22.6 110.0 9.9 6 152 6.625 16.625 219 51.7 23.5 11.0 51.7 12 305 12.750 32 203.625 219 10.000 25 9.000 229 0.10.6 53.0 2.0 0.375 9.5 117.0 53.1 10 25 10.750 273 9.500 21 5.0 2.5 119.0 5.0 12 305 12.750 32 10.000 25 5.0 2.5 120.0 5. 6 152.625 219 9.375 23 51.5 23. 153.0 69. 203.625 219 9.750 2 52.5 23. 155.0 70.3 1 356 1.000 356 10 25 10.750 273 11.000 279 10.125 257 0.1. 53.5 2.3 0.375 9.5 15.0 71.7 12 305 12.750 32 10.625 270 5.3 2.6 160.0 72.6 1 356 1.000 356 11.000 279 59.6 27.0 165.0 7. 6 152.625 219 10.375 26 65.1 29.5 176.0 79. 203.625 219 10.750 273 67.1 30. 10.0 1.6 16 06 16.000 06 10 25 10.750 273 11.125 23 69.3 31. 16.0. 12.000 305 0.1. 0.375 9.5 12 305 12.750 32 11.625 295 71.2 32.3 191.0 6.6 1 356 1.000 356 12.000 305 72. 32. 19.0.0 16 06 16.000 06 12.000 305 75.9 3. 199.0 90.3 203 10.750 273 11.750 29 1.5 37.0 196.0.9 10 25 10.750 273 12.125 30 3.5 37.9 222.0 100.7 1 57 1.000 57 12 305 12.750 32 12.625 321 6.5 39.2 230.0 10.3 13.500 33 0.1. 0.375 9.5 1 356 1.000 356 13.000 330.7 0.2 236.0 107.0 16 06 16.000 06 13.000 330 90.2 0.9 21.0 109.3 1 57 1.000 57 13.500 33 9.7 3.0 29.0 112.9 203 10.750 273 12.750 32 12.0 56.2 32.0 1. 10 25 10.750 273 13.125 333 126.0 57.2 332.0 150.6 20 50 20.000 50 1 356 1.000 356 1.000 356 126.0 57.2 336.0 152. 15.000 31 0.21 5.5 0.375 9.5 16 06 16.000 06 1.000 356 127.0 57.6 33.0 153.3 1 57 1.000 57 1.500 36 12.0 5.1 30.0 15.2 20 50 20.000 50 15.000 31 130.0 59.0 37.0 157. 12 305 12.750 32 15.625 397 191.0 6.6 510.0 231.3 1 356 1.000 356 16.000 06 192.0 7.1 513.0 232.7 2 610 2.000 610 16 06 16.000 06 16.000 06 193.0 7.5 516.0 23.1 17.000 32 0.250 6. 0.375 9.5 1 57 1.000 57 16.500 19 19.0.0 519.0 235. 20 50 20.000 50 17.000 32 195.0.5 522.0 236. 2 610 2.000 610 17.000 32 200.0 90.7 52.0 239.5 M a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. -7
Reducers SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] H H Concentric Reducer H Eccentric Reducer Sch lb kg 5S 0.065 1.7 0.3 0.1 1 1/2 3 1.900 10S 0.109 2. 2.500 6 0. 0.2 0S 0.15 3.7 0.6 0.3 5S 0.065 1.7 0. 0.2 2 51 2.375 60 10S 0.109 2. 3.000 76 0.7 0.3 0S 0.15 3.7 0.9 0. 5S 0.03 2.1 0.7 0.3 2 1/2 6 2.75 73 10S 0.120 3.0 3.500 9 1.1 0.5 0S 0.203 5.2 1.7 0. 5S 0.03 2.1 0.9 0. 3 76 3.500 9 10S 0.120 3.0 3.500 9 1.3 0.6 0S 0.216 5.5 2.3 1.0 5S 0.03 2.1 1.3 0.6 102.500 11 10S 0.120 3.0.000 102 1.9 0.9 0S 0.237 6.0 3.7 1.7 5S 0.109 2. 2.7 1.2 5 127 5.563 11 10S 0.13 3. 5.000 127 3.3 1.5 0S 0.25 6.6 6.2 2. 5S 0.109 2. 3.6 1.6 6 152 6.625 16 10S 0.13 3. 5.500 10. 2.0 0S 0.20 7.1.9.0 5S 0.109 2. 5.1 2.3 203.625 219 10S 0.1 3. 6.000 152 6.9 3.1 0S 0.322.2 1.6 6.6 5S 0.13 3. 9.1.1 10 25 10.750 273 10S 0.165.2 7.000 17 11.1 5.1 0S 0.365 9.3 2.2 11.0 5S 0.156.0 1.3 6.5 12 305 12.750 32 10S 0.10.6.000 203 16.5 7.5 0S 0.375 9.5 33. 15.3 5S 0.156.0 0.2 1.2 1 356 1.000 356 10S 0.1. 13.000 330 30. 1.0 0S 0.375 9.5 60.5 27. 5S 0.165.2 33.3 15.1 16 06 16.000 06 10S 0.1. 1.000 356 37.9 17.2 0S 0.375 9.5 7.7 33.9 5S 0.165.2 0.2 1.2 1 57 1.000 57 10S 0.1. 15.000 31 5. 20. 0S 0.375 9.5 90.3 1.0 5S 0.1. 67.9 30. 20 50 20.000 50 10S 0.21 5.5 20.000 50 7.6 35.6 0S 0.375 9.5 13.1 60. 5S 0.21 5.5 9.5 2.9 2 610 2.000 610 10S 0.250 6. 20.000 50 10.2 9.1 0S 0.375 9.5 161. 73.2 a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. - c.
Caps SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] Identification lb kg 5S 0.065 1.7 0.2 0.1 1 1/2 3 1.900 10S 0.109 2. 1.50 3 0.3 0.1 0S 0.15 3.7 0. 0.2 5S 0.065 1.7 0.2 0.1 2 51 2.375 60 10S 0.109 2. 1.50 3 0. 0.2 0S 0.15 3.9 0.6 0.3 5S 0.03 2.1 0. 0.2 2 1/2 6 2.75 73 10S 0.120 3.0 1.50 3 0.5 0.2 0S 0.203 5.2 0.9 0. 5S 0.03 2.1 0.6 0.3 3 76 3.500 9 10S 0.120 3.0 2.00 51 0. 0. 0S 0.216 5.5 1.5 0.7 5S 0.03 2.1 0.9 0. 102.500 11 10S 0.120 3.0 2.50 6 1.3 0.6 0S 0.237 6.0 2.5 1.1 5S 0.109 2. 2.0 0.9 5 127 5.563 11 10S 0.13 3. 3.00 76 2. 1.1 0S 0.25 6.6.7 2.1 5S 0.109 2. 2.5 1.1 6 152 6.625 16 10S 0.13 3. 3.50 9 3.1 1. 0S 0.20 7.1 6.5 2.9 5S 0.109 2..0 1. 203.625 219 10S 0.1 3..00 102 5.5 2.5 0S 0.322.2 11.9 5. 5S 0.13 3..1 3.7 10 25 10.750 273 10S 0.165.2 5.00 127 10.0.5 0S 0.365 9.3 22.0 10.0 5S 0.156.0 13.5 6.1 12 305 12.750 32 10S 0.10.6 6.00 152 1.7 6.7 0S 0.375 9.5 30.7 13.9 5S 0.156.0 ----- ----- 1 356 1.000 356 10S 0.1. 6.50 165 1.0.2 0S 0.375 9.5 33.0 15.0 5S 0.165.2 ------ ----- 16 06 16.000 06 10S 0.1. 7.00 17 23.0 10. 0S 0.375 9.5 2.0 19.1 5S 0.165.2 ----- ----- 1 57 1.000 57 10S 0.1..00 203 29.0 13.2 0S 0.375 9.5 55.0 2.9 5S 0.1. ----- ----- 20 50 20.000 50 10S 0.21 5.5 9.00 229 37.0 16. 0S 0.375 9.5 6.0 30. 5S 0.21 5.5 ----- ----- 2 610 2.000 610 10S 0.250 6. 10.50 267 5.0 26.3 0S 0.375 9.5 96.0 1.0 a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. E Ellipsoidal Shaped Cap E arwick c. -9
Stub-Ends SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] F G R Sch. Po. lb kg R. G Stub-end illustrated with Galvanized Lap-joint Flange (See P -12 & -13 for Lap-joint detail) F 1 1/2 3 2 1/2 3 76 102 5 6 6 127 152 1.900 2 51 2.375 60 5.563 6.625 11 16 203.625 219 10 25 10.750 273 12 305 12.750 32 1 356 1.000 356 16 06 16.000 06 1 57 20 50 2 610 2.75 73 3.500 9.500 11 1.000 57 20.000 50 2.000 610 10S 0.109 2. 0.6 0.2 2.000 51 2.75 73 0.250 6 0S 0.15 3.7 0.9 0. 10S 0.109 2. 0.9 0. 2.500 6 3.625 92 0.313 0S 0.15 3.9 1.2 0.5 10S 0.120 3.0 1.1 0.5 2.500 6.125 105 0.313 0S 0.203 5.2 1. 0. 10S 0.120 3.0 1.6 0.7 2.500 6 5.000 127 0.375 10 0S 0.216 5.5 2.5 1.1 10S 0.120 3.0 2.5 1.1 3.000 76 6.1 157 0.3 11 0S 0.237 6.0.0 1. 10S 0.13 3. 3.5 1.6 3.000 76 7.313 16 0.3 11 0S 0.25 6.6 5.6 2.5 10S 0.13 3.. 2.2 3.500 9.500 216 0.500 13 0S 0.20 7.1.3 3.7 10S 0.1 3. 7.7 3.5.000 102 10.625 270 0.500 13 0S 0.322.2 13.0 5.9 10S 0.165.2 12.1 5.5 5.000 127 12.750 32 0.500 13 0S 0.365 9.3 23.0 10. 10S 0.10.6 1.0.2 6.000 152 15.000 31 0.500 13 0S 0.375 9.5 33.0 15.0 10S 0.1. 22.3 10.1 6.000 152 16.250 13 0.500 13 0S 0.375 9.5 37.6 17.1 10S 0.1. 27.5 12.5 6.000 152 1.500 70 0.500 13 0S 0.375 9.5 6.3 21.0 10S 0.1. 35.2 16.0 6.000 152 21.000 533 0.500 13 0S 0.375 9.5 6.0 29.0 10S 0.21 5.5 9. 22.6 6.000 152 23.000 5 0.500 13 0S 0.375 9.5 7.2 33.7 10S 0.250 6. 6.000 152 27.250 692 0.500 13 77. 35.1 0S 0.375 9.5 95.0 3.1 a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME 36.19 d. Dimensions: SME 16.9 (Short Pattern) e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. -10 c.
Couplings SM 12 & SME S-12 SME 16.11, Class 3000 Nominal Pipe Size C D E F G H Coupling Half Coupling 1/ 1.250 0.750 0.625 0.20 0.375 0.750 1.000 0.250 0.13 0.07 3 32 19 16 11 10 19 25 6 0.1 0.03 1/ 1.375 0.750 0.6 0.555 0.375 0.75 1.000 0.250 0.13 0.07 6 35 19 17 1 10 22 25 6 0.1 0.03 3/ 1.500 0.75 0.750 0.690 0.3 1.000 1.125 0.250 0.31 0.16 10 3 22 19 1 11 25 29 6 0.1 0.1 1/2 1.75 1.125 1.313 0.55 0.500 1.250 1.375 0.375 0.25 0.13 13 29 33 22 13 32 35 10 0.1 0.1 3/ 2.000 1.375 1.000 1.065 0.563 1.500 1.500 0.375 0. 0.22 19 51 35 25 27 1 3 3 10 0.2 0.1 1 2.375 1.750 1.1 1.330 0.625 1.750 1.750 0.500 0.63 0.32 25 60 30 3 16 13 0.3 0.1 1 1/ 2.625 2.25 1.313 1.675 0.6 2.250 1.75 0.500 1.56 0.7 32 67 57 33 3 17 57 13 0.7 0. 1 1/2 3.125 2.500 1.563 1.915 0.750 2.500 2.000 0.500 2.19 1.10 3 79 6 0 9 19 6 51 13 1.0 0.5 2 3.375 3.000 1.6 2.06 0.75 3.000 2.500 0.750.50 2.25 51 6 76 3 61 22 76 6 19 2.0 1.0 2 1/2 3.625 3.625 1.13 2.906 0.75 3.625 2.500 0.750 6.25 3.13 6 92 92 6 7 22 92 6 19 2. 1. 3.250.250 2.125 3.535 1.000.250 2.750 0.750 6.75 3.3 76 10 10 5 90 25 10 70 19 3.1 1.5.750 5.500 2.375.55 1.125 5.500 3.000 0.750 16.75.3 102 121 10 60 115 29 10 76 19 7.6 3. lb kg lb kg G G C E H E E D F D F hreaded Coupling hreaded Half-Coupling Socket-Welding Coupling Socket-Welding Half-Coupling lso available, tegrally Reinforced Forged ranch Outlet Fittings. (/S-12, MSS-SP 97) uttwelding hreaded Socket Welding arwick c. -11
Lap-joints SM 105 & SME S-105 Class 150, Galvanized Nominal Pipe Size O F2 X Y2 2 r W Diameter of olt Circle Diameter of olt Holes Number of olts lb kg 1 1/2 5.00 0.69 2.56 0. 1.97 0.25 3. 5/ 3.0 3 127 1 65 22 50 6 99 16 1. 2 6.00 0.75 3.06 1.00 2.6 0.31.75 3/ 5.0 51 152 19 7 25 62 121 19 2.3 2 1/2 7.00 0. 3.56 1.12 2.97 0.31 5.50 3/ 7.0 6 17 22 90 2 75 10 19 3.2 3 7.50 0.9.25 1.19 3.60 0.3 6.00 3/.0 76 191 2 10 30 91 10 152 19 3.6 9.00 0.9 5.31 1.31.60 0. 7.50 3/ 13.0 102 229 2 135 33 117 11 191 19 5.9 5 10.00 0.9 6. 1. 5.69 0..50 7/ 15.0 127 25 2 16 37 15 11 216 22 6. 6 11.00 1.00 7.56 1.56 6.75 0.50 9.50 7/ 19.0 152 279 25 192 0 171 13 21 22.6 13.50 1.12 9.69 1.75.75 0.50 11.75 7/ 30.0 203 33 2 26 222 13 29 22 13.6 10 16.00 1.19 12.00 1.9 10.92 0.50 1.25 1 3.0 12 25 06 30 305 9 277 13 362 25 19.5 12 19.00 1.25 1.3 2.19 12.92 0.50 17.00 1 6.0 12 305 3 32 365 56 32 13 32 25 29.1 1 21.00 1.3 15.75 3.12 1.1 0.50 1.75 1 1/ 105.0 12 356 533 35 00 79 360 13 76 29 7.7 16 23.50 1. 1.00 3. 16.19 0.50 21.25 1 1/ 10.0 16 06 597 37 57 7 11 13 50 29 63.6 1 25.00 1.56 19. 3.1 1.20 0.50 22.75 1 1/ 160.0 16 57 635 0 505 97 62 13 57 32 72.7 20 27.50 1.69 22.00.06 20.25 0.50 25.00 1 1/ 195.0 20 50 699 3 559 103 51 13 635 32.6 2 32.00 1. 26.12.3 2.25 0.50 29.50 1 3/ 275.0 20 610 13 663 111 616 13 79 35 125.0 O W F2 R X 2 Y2 a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Finish: Galvanized to SM 123 c. Dimension: SME 16.5 Class 150 d. Maximum llowable Working Pressure: See SME 16.5 material group,able F2-1.1 material group 1.1, or contact our technical representatives. e. Other classes available on request. -12 c.
Lap-joints SM 105 & SME S-105 Class 300, Galvanized Nominal Pipe Size O F2 X Y2 2 r W Diameter of olt Circle Diameter of olt Holes Number of olts lb kg 1 1/2 6.12 0.1 2.75 1.19 1.97 0.25.50 7/ 6.0 3 155 21 70 30 50 6 11 22 2.7 2 6.50 0. 3.31 1.31 2.6 0.31 5.00 3/ 7.0 51 165 22 33 62 127 19 3.2 2 1/2 7.50 1.00 3.9 1.50 2.97 0.31 5. 7/ 10.0 6 191 25 100 3 75 19 22.5 3.25 1.12.62 1.69 3.60 0.3 6.62 7/ 13.0 76 210 2 117 3 91 10 16 22 5.9 10.00 1.25 5.75 1..60 0. 7. 7/ 22.0 102 25 32 16 117 11 200 22 10.0 5 11.00 1.3 7.00 2.00 5.69 0. 9.25 7/ 2.0 127 279 35 17 51 15 11 235 22 12.7 6 12.50 1..12 2.06 6.75 0.50 10.62 7/ 39.0 12 152 31 37 206 52 171 13 270 22 17.7 15.00 1.62 10.25 2..75 0.50 13.00 1 5.0 12 203 31 1 260 62 222 13 330 25 26. 10 17.50 1. 12.62 3.75 10.92 0.50 15.25 1 1/ 91.0 16 25 5 321 95 277 13 37 29 1. 12 20.50 2.00 1.75.00 12.92 0.50 17.75 1 1/ 10.0 16 305 521 51 375 102 32 13 51 32 63.6 1 23.00 2.12 16.75.3 1.1 0.50 20.25 1 1/ 190.0 20 356 5 5 25 111 360 13 51 32 6. 16 25.50 2.25 19.00.75 16.19 0.50 22.50 1 3/ 250.0 20 06 6 57 3 121 11 13 572 35 113.6 1 2.00 2.3 21.00 5.12 1.20 0.50 2.75 1 3/ 295.0 2 57 711 60 533 130 62 13 629 35 13.1 20 30.50 2.50 23.12 5.50 20.25 0.50 27.00 1 3/ 370.0 2 50 775 6 57 10 51 13 66 35 16.2 2 36.00 2.75 27.62 6.00 2.25 0.50 32.00 1 5/ 550.0 2 610 91 70 702 152 616 13 13 1 250.0 O W a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Finish: Galvanized to SM 123 c. Dimension: SME 16.5 Class 300 d. Maximum llowable Working Pressure: See SME 16.5 material group,able F2-1.1 material group 1.1, or contact our technical representatives. e. Other classes available on request. F2 R X 2 Y2 arwick c. -13
SM 12 & SME S-12 Class 150 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y3 1 2 3 r D R Po Po 3/ 3. 0. 0.50 1.50 1.05 0.56 0.62 2.00 0.62 1.09 1.11 0.2 0.12 0. 1.69 19 9 11 13 3 27 1 16 51 16 2 2 21 3 11 3 1.25 0.50 0.56 1.9 1.32 0.62 0.69 2.12 0.69 1.36 1.3 1.05 0.12 0.50 2.00 25 10 13 1 9 3 16 1 5 1 35 35 27 3 13 51 1 1/.62 0.56 0.62 2.31 1.66 0.75 0.1 2.19 0.1 1.70 1.72 1.3 0.19 0.56 2.50 32 117 1 16 59 2 19 21 56 21 3 35 5 1 6 1 1/2 5.00 0.62 0.69 2.56 1.90 0.1 0. 2.3 0. 1.95 1.97 1.61 0.25 0.62 2. 3 127 16 1 65 21 22 60 22 50 50 1 6 16 73 2 6.00 0.69 0.75 3.06 2.3 0.9 1.00 2. 1.00 2. 2.6 2.07 0.31 0.69 3.62 51 152 17 19 7 60 2 25 62 25 62 62 53 1 92 2 1/2 7.00 0.1 0. 3.56 2. 1.06 1.12 2.69 1.12 2.9 2.97 2.7 0.31 0.75.12 6 17 21 22 90 73 27 2 6 2 75 75 63 19 105 3 7.50 0. 0.9.25 3.50 1.12 1.19 2.69 1.19 3.57 3.60 3.07 0.3 0.1 5.00 76 191 22 2 10 9 2 30 6 30 91 91 7 10 21 127 9.00 0. 0.9 5.31.50 1.25 1.31 2.9 1.31.57.60.03 0. ----- 6.19 102 229 22 2 135 11 32 33 75 33 116 117 102 11 ----- 157 5 10.00 0. 0.9 6. 5.56 1.3 1. 3. 1. 5.66 5.69 5.05 0. ----- 7.31 127 25 22 2 16 11 35 37 7 37 1 15 12 11 ----- 16 6 11.00 0.9 1.00 7.56 6.63 1.50 1.56 3. 1.56 6.72 6.75 6.07 0.50 -----.50 152 279 2 25 192 16 3 0 7 0 171 171 15 13 ----- 216 13.50 1.06 1.12 9.69.63 1.69 1.75 3.9 1.75.72.75 7.9 0.50 ----- 10.62 203 33 27 2 26 219 3 100 221 222 203 13 ----- 270 10 16.00 1.12 1.19 12.00 10.75 1. 1.9 3.9 1.9 10. 10.92 10.02 0.50 ----- 12.75 25 06 2 30 305 273 9 100 9 276 277 255 13 ----- 32 12 19.00 1.19 1.25 1.3 12.75 2.12 2.19. 2.19 12. 12.92 12.00 0.50 ----- 15.00 305 3 30 32 365 32 5 56 113 56 327 32 305 13 ----- 31 1 21.00 1.31 1.3 15.75 1.00 2.19 3.12.9 2.25 1.1 1.1 0.50 ----- 16.25 356 533 33 35 00 356 56 79 125 57 359 360 13 ----- 13 16 23.50 1.3 1. 1.00 16.00 2. 3..9 2.50 16.16 16.19 0.50 ----- 1.50 06 597 35 37 57 06 62 7 125 6 10 11 13 ----- 70 1 25.00 1.50 1.56 19. 1.00 2.62 3.1 5. 2.69 1.1 1.20 0.50 ----- 21.00 57 635 3 0 505 57 67 97 13 6 62 62 13 ----- 533 20 27.50 1.62 1.69 22.00 20.00 2.1.06 5.62 2. 20.20 20.25 0.50 ----- 23.00 50 699 1 3 559 50 71 103 13 73 513 51 13 ----- 5 2 32.00 1.1 1. 26.12 2.00 3.19.3 5.9 3.25 2.25 2.25 0.50 ----- 27.25 610 13 6 663 610 1 111 151 3 616 616 13 ----- 692 Must be specified at time of purchase -1 c.
Flanges SM 12 & SME S-12 Class 150 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Nominal Size Pipe () Size Y1 W X 1 lb kg lb kg lb kg lb kg 2.75 5/ 2.0 2.0 2.0 2.0 3/ 70 16 0.9 0.9 0.9 0.9 19 3.12 5/ 2.0 2.0 3.0 2.0 1 79 16 0.9 0.9 1. 0.9 25 3.50 5/ 3.0 3.0 3.0 3.0 1 1/ 9 16 1. 1. 1. 1. 32 3. 5/ 3.0 3.0.0.0 1 1/2 9 16 1. 1. 1. 1. 3.75 3/ 5.0 5.0 6.0 5.0 2 121 19 2.3 2.3 2.7 2.3 51 5.50 3/ 7.0 7.0.0 7.0 2 1/2 10 19 3.2 3.2 3.6 3.2 6 6.00 3/.0.0 10.0 9.0 3 152 19 3.6 3.6.5.1 76 7.50 3/ 13.0 13.0 15.0 17.0 191 19 5.9 5.9 6. 7.7 102.50 7/ 15.0 15.0 19.0 20.0 5 216 22 6. 6..6 9.1 127 9.50 7/ 19.0 19.0 2.0 26.0 6 21 22.6.6 10.9 11. 152 11.75 7/ 30.0 30.0 39.0 5.0 29 22 13.6 13.6 17.7 20.5 203 1.25 1 3.0 3.0 52.0 70.0 10 12 362 25 19.5 19.5 23.6 31. 25 17.00 1 6.0 6.0 0.0 110.0 12 12 32 25 29.1 29.1 36. 50.0 305 1.75 1 1/ 90.0 105.0 110.0 10.0 1 12 76 29 0.9 7.7 50.0 63.6 356 21.25 1 1/ 9.0 10.0 10.0 10.0 16 16 50 29.5 63.6 63.6 1. 06 22.75 1 1/ 130.0 160.0 150.0 220.0 1 16 57 32 59.1 72.7 6.2 100.0 57 25.00 1 1/ 165.0 195.0 10.0 25.0 20 20 635 32 75.0.6 1. 129.5 50 29.50 1 3/ 220.0 275.0 260.0 30.0 2 20 79 35 100.0 125.0 11.2 195.5 610 F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W a. Material: Stainless Steel F30L & F316L. (Other grades available on request). F1 R b. Dimension: SME 16.5 Class 150 (Others Class available on request). lind Flange c. Maximum llowable Working Pressure: See SME 16.5 able F2-2.3 material group 2.3, or contact our technical representatives. arwick c. -15
Flanges SM 12 & SME S-12 Class 300 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y3 1 2 3 r D R 3/.62 0.56 0.62 1. 1.05 0.9 1.00 2.19 0.62 1.09 1.11 0.2 0.12 0. 1.69 19 117 1 16 27 2 25 56 16 2 2 21 3 11 3 1. 0.62 0.69 2.12 1.32 1.00 1.06 2.3 0.69 1.36 1.3 1.05 0.12 0.50 2.00 25 12 16 1 5 3 25 27 60 1 35 35 27 3 13 51 1 1/ 5.25 0.69 0.75 2.50 1.66 1.00 1.06 2.50 0.1 1.70 1.72 1.3 0.19 0.56 2.50 32 133 1 19 6 2 25 27 6 21 3 35 5 1 6 1 1/2 6.12 0.75 0.1 2.75 1.90 1.13 1.19 2.63 0. 1.95 1.97 1.61 0.25 0.63 2. 3 155 19 21 70 29 30 67 22 50 50 1 6 16 73 2 6.50 0.1 0. 3.31 2.3 1.25 1.31 2.69 1.12 2. 2.6 2.07 0.31 0.69 3.62 51 165 21 22 60 32 33 6 2 62 62 53 17 92 2 1/2 7.50 0.9 1.00 3.9 2. 1. 1.50 2.9 1.25 2.9 2.97 2.7 0.31 0.75.12 6 191 2 25 100 73 37 3 75 32 75 75 63 19 105 3.25 1.06 1.12.62 3.50 1.63 1.69 3.06 1.25 3.57 3.60 3.07 0.3 0.1 5.00 76 210 27 2 117 9 1 3 7 32 91 91 7 10 21 127 10.00 1.19 1.25 5.75.50 1.2 1. 3.32 1..57.60.03 0. ----- 6.19 102 25 30 32 16 11 6 37 116 117 102 11 ----- 157 5 11.00 1.31 1.3 7.00 5.56 1.9 2.00 3.2 1.69 5.66 5.69 5.05 0. ----- 7.31 127 279 33 35 17 11 9 51 97 3 1 15 12 11 ----- 16 6 12.50 1.3 1..12 6.63 2.00 2.06 3.2 1.1 6.72 6.75 6.07 0.50 -----.50 152 31 35 37 206 16 51 52 97 6 171 171 15 13 ----- 216 15.00 1.56 1.62 10.25.63 2.3 2..32 2.00.72.75 7.9 0.50 ----- 10.62 203 31 0 1 260 219 60 62 110 51 221 222 203 13 ----- 270 10 17.50 1.1 1. 12.62 10.75 2.56 3.75.56 2.19 10. 10.92 10.02 0.50 ----- 12.75 25 5 6 321 273 65 95 116 56 276 277 255 13 ----- 32 12 20.50 1.9 2.00 1.75 12.75 2.2.00 5.06 2.3 12. 12.92 12.00 0.50 ----- 15.00 305 521 9 51 375 32 72 102 129 60 327 32 305 13 ----- 31 1 23.00 2.06 2.12 16.75 1.00 2.9.3 5.56 2.50 1.1 1.1 0.50 ----- 16.25 356 5 52 5 25 356 75 111 11 6 359 360 13 ----- 13 16 25.50 2.19 2.25 19.00 16.00 3.19.75 5.69 2.69 16.16 16.19 0.50 ----- 1.50 06 6 56 57 3 06 1 121 15 6 10 11 13 ----- 70 1 2.00 2.31 2.3 21.00 1.00 3. 5.12 6.19 2.75 1.1 1.20 0.50 ----- 21.00 57 711 59 60 533 57 7 130 157 70 62 62 13 ----- 533 20 30.50 2. 2.50 23.12 20.00 3.69 5.50 6.32 2. 20.20 20.25 0.50 ----- 23.00 50 775 62 6 57 50 9 10 161 73 513 51 13 ----- 5 2 36.00 2.69 2.75 27.62 2.00.13 6.00 6.56 3.25 2.25 2.25 0.50 ----- 27.25 610 91 6 70 702 610 105 152 167 3 616 616 13 ----- 692 Must be specified at time of purchase -16 c.
Flanges SM 12 & SME S-12 Class 300 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Size () Y1 W X 1 lb kg a. Material: Stainless Steel F30L & F316L. (Other grades available on request). b. Dimension: SME 16.5 Class 300 (Others Class available on request). c. Maximum llowable Working Pressure: See SME 16.5 able F2-2.3 material group 2.3, or contact our technical representatives. lb kg lb kg lb kg 3.25 3/ 3.0 3.0 3.0 3.0 3/ 3 19 1. 1. 1. 1. 19 3.50 3/ 3.0 3.0.0 3.0 1 9 19 1. 1. 1. 25 3. 3/.0.0 5.0.0 1 1/ 99 19 1. 2.3 1. 32.50 7/ 6.0 6.0 7.0 6.0 1 1/2 11 22 2.7 3.2 2.7 3 5.00 3/ 7.0 7.0 9.0.0 2 127 19 3.2 3.2.1 3.6 51 5. 7/ 10.0 10.0 12.0 12.0 2 1/2 19 22.5.5 5.5 5.5 6 6.62 7/ 13.0 13.0 15.0 16.0 3 16 22 5.9 5.9 6. 7.3 76 7. 7/ 22.0 22.0 25.0 27.0 200 22 10.0 10.0 11. 12.3 102 9.25 7/ 2.0 2.0 32.0 35.0 5 235 22 12.7 12.7 1.5 15.9 127 10.62 7/ 39.0 39.0 2.0 50.0 6 12 270 22 17.7 17.7 19.1 22.7 152 13.00 1 5.0 5.0 67.0 1.0 12 330 25 26. 26. 30.5 36. 203 15.25 1 1/ 1.0 91.0 91.0 125.0 10 16 37 29 36. 1. 1. 56. 25 17.75 1 1/ 115.0 10.0 10.0 15.0 12 16 51 32 52.3 63.6 63.6.1 305 20.25 1 1/ 165.0 190.0 10.0 250.0 1 20 51 32 75.0 6. 1. 113.6 356 22.50 1 3/ 190.0 250.0 250.0 295.0 16 20 572 35 6. 113.6 113.6 13.1 06 2.75 1 3/ 250.0 295.0 320.0 395.0 1 2 629 35 113.6 13.1 15.5 179.5 57 27.00 1 3/ 315.0 370.0 00.0 505.0 20 2 66 35 13.2 16.2 11. 229.5 50 32.00 1 5/ 75.0 550.0 50.0 790.0 2 2 13 1 215.9 250.0 263.6 359.1 610 F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. -17
Flanges Description Slip-On Flanges he slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the of the matching pipe. hey are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Lap-Joint Flanges he lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. his radius is necessary to have the flange accoodate a lap joint stub end. Normally, a lap joint flange and stub end are mated together in an assembly system. Welding Neck Flanges he welding neck flange is normally referred to as the ''high hub'' flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentration at the base of the flange. he welding neck flange is the best designed butt-welding flange of those currently available because of the design. Socket Welding Flanges he socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. he counter bore is slightly larger than the of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. he diameter of the smaller bore is the same as the I.D. of the matching pipe. restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. his eliminates any restriction in flow when using a socket welding flange. hreaded (Screwed) Flanges he threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding create a hazard. lind Flanges he blind flange is a flange without a bore. It is used to close off the ends of a piping system and / or a pressure vessel opening. It also permits easy access to the interior of line or vessel once it has been sealed and must be reopened. -1 c.
Carbon Steel Pipe, Fittings and Flanges Suary of specifications [Notes (1) (2)] icable. is a carbon steel products distributor. Given the numerous specifications concerning Carbon Steel Pipes we keep in stock the most requested pipes as mentioned below. SM 53 / SME S-53 ype-e and S, Grade hese specifications apply to the pipe with or without longitudinal weld. See able 1 for types and grades. he pipes of this specification can be welded, bended, flanged or other forming operations and are generally used for applications such as steam, compressed air, water and gas pipelines. SM 106 / SME S-106, Grade his specification applies to seamless pipes (SMLS) Grade or, which are generally used for specific purposes, in particular for applications where temperatures are high. he pipes of this specification can be welded, bended, flanged or other forming operations. SM 23 / SME S-23 Fittings he fittings of this specification can be built with or without welding. hese fittings are designed for pressure piping and pressure vessels for use where service temperatures are moderate to high. he maximum allowable operating pressure for fittings shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. Flanges and couplings, SM 105 / SME S-105 Flanges and coupling of this specification are of forged carbon steel for applications in ambient to elevated temperatures. he maximum allowable working pressure for flanges are shown inside the SME 16.5 code. he maximum allowable working pressure for pipes shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. able 1 ype Construction Grade F Continous Weld (CW) E Electric Resistance Weld (ERW) & (3) S Seamless (SMLS) & (3) Notes: 1. Our carbon steel pipes and fittings are available only in our oisbriand (QC) warehouse. 2. he brief descriptions should be verified before the work is started. 3. Pipes of grade in stock only. On request Grade can be provided. arwick c. 5-1
Pipes SM 106 / 53 & SME S-106 / S-53 Nominal Pipe Size Outside diameter Nominal hickness and Standard Extra Strong Poids lb / ft kg / m lb / ft kg / m 1/2 13 0.0 21 0.109 2. 0.9 1.3 0.17 3.7 1.1 1.6 3/ 19 1.050 27 0.113 2.9 1.1 1.7 0.15 3.9 1.5 2.2 1 25 1.315 33 0.133 3. 1.7 2.5 0.179.5 2.2 3.2 1 1/ 32 1.660 2 0.10 3.6 2.3 3. 0.191.9 3.0.5 1 1/2 3 1.900 0.15 3.7 2.7.1 0.200 5.1 3.6 5. 2 51 2.375 60 0.15 3.9 3.7 5. 0.21 5.5 5.0 7.5 2 1/2 6 2.75 73 0.203 5.2 5..6 0.276 7.0 7.7 11. 3 76 3.500 9 0.216 5.5 7.6 11.3 0.300 7.6 10.3 15.3 3 1/2 9.000 102 0.226 5.7 9.1 13.6 0.31.1 12.5 1.6 102.500 11 0.237 6.0 10. 16.1 0.337.6 15.0 22.3 5 127 5.563 11 0.25 6.6 1.6 21. 0.375 9.5 20. 31.0 6 152 6.625 16 0.20 7.1 19.0 2.3 0.32 11.0 2.6 2.6 203.625 219 0.322.2 2.6 2.6 0.500 12.7 3. 6.7 10 25 10.750 273 0.365 9.3 0.5 60. 0.500 12.7 5.7 1.6 12 305 12.750 32 0.375 9.5 9.6 73.9 0.500 12.7 65. 97.5 1 356 1.000 356 0.375 9.5 5.6 1. 0.500 12.7 72.1 107.5 16 06 16.000 06 0.375 9.5 62.6 93.3 0.500 12.7 2. 123. 1 57 1.000 57 0.375 9.5 70.6 105.2 0.500 12.7 93.5 139.3 20 50 20.000 50 0.375 9.5 7.6 117.2 0.500 12.7 10.1 155.2 2 610 2.000 610 0.375 9.5 9.6 11.1 0.500 12.7 125.5 17.1 Specification ype of Pipe Grade able 1 SM 53 SME S 53 SM 106 SME S 106 ype - E Electric Resistance Weld (ERW) ype - S Seamless (SMLS) a. Nominal Diameter & hickness: ccording to SME 36.10 b. hickness olerance: ccording to / S-106 and / S-53 will never be less than 7.5% of the nominal thickness. c. Material: vailable as shown in able 1. Other specifications, types and grades are available upon request. d. Length: Single random lengths from 16 to 22 ft. Double random lengths from 22 ft available on request e. Maximum operating pressure: Must be calculated using the latest version of the applicable SME code. arwick c. 5-3
90 Elbows SM 23 & SME S-23 1 90 Elbow (Long Radius) 90 Elbow (Short Radius) Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius Identification lb kg lb kg 1/2 3/ 1 13 19 25 0.0 1.050 1.315 21 27 33 SD 0.109 2. 0.2 0.1 ----- ----- 1.500 3 ----- ----- XS 0.17 3.7 0.3 0.1 ----- ----- SD 0.113 2.9 0.2 0.1 ----- ----- 1.500 3 ----- ----- XS 0.15 3.9 0.3 0.1 ----- ----- SD 0.133 3. 0. 0.2 0.3 0.1 1.500 3 1.000 25 XS 0.179.5 0.5 0.2 ----- ----- 1 1/ 32 1.660 2 SD 0.10 3.6 0.6 0.3 0. 0.2 1.75 1.250 32 XS 0.191.9 0.9 0. ----- ----- 1 1/2 3 1.900 SD 0.15 3.7 0.9 0. 0.6 0.3 2.250 57 1.500 3 XS 0.200 5.1 1.2 0.5 0. 0.3 2 51 2.375 60 SD 0.15 3.9 1.6 0.7 1.0 0.5 3.000 76 2.000 51 XS 0.21 5.5 2.2 1.0 1.5 0.7 2 1/2 6 2.75 73 SD 0.203 5.2 3.3 1.5 2.1 1.0 3.750 95 2.500 6 XS 0.276 7.0.0 1. 2. 1.3 3 76 3.500 9 SD 0.216 5.5 5.0 2.3 3.0 1..500 11 3.000 76 XS 0.300 7.6 6.5 2.9.3 1.9 3 1/2 9.000 102 SD 0.226 5.7 6. 3.1.5 2.0 5.250 133 3.500 9 XS 0.31.1. 3. 6.0 2.7 102.500 11 SD 0.237 6.0 9.0.1 6.3 2. 6.000 152.000 102 XS 0.337.6 13.5 6.1.5 3.9 5 127 5.563 11 SD 0.25 6.6 15.5 7.0 9.6. 7.500 191 5.000 127 XS 0.375 9.5 22.0 10.0 1.0 6. 6 152 6.625 16 SD 0.20 7.1 2.5 11.1 1.0.2 9.000 229 6.000 152 XS 0.32 11.0 35.0 15.9 23.0 10. 203.625 219 SD 0.322.2 50.0 22.7 3.0 15. 12.000 305.000 203 XS 0.500 12.7 71.0 32.2 7.5 21.5 10 25 10.750 273 SD 0.365 9.3.0 39.9 5.0 26.3 15.000 31 10.000 25 XS 0.500 12.7 107.0.5 70.0 31. 12 305 12.750 32 SD 0.375 9.5 125.0 56.7 0.0 36.3 1.000 57 12.000 305 XS 0.500 12.7 160.0 72.6 10.0 7.2 1 356 1.000 356 SD 0.375 9.5 160.0 72.6 105.0 7.6 21.000 533 1.000 356 XS 0.500 12.7 205.0 93.0 10.0 63.5 16 06 16.000 06 SD 0.375 9.5 206.0 93. 132.0 59.9 2.000 610 16.000 06 XS 0.500 12.7 276.0 125.2 17.0 7.9 1 57 1.000 57 SD 0.375 9.5 260.0 117.9 167.0 75. 27.000 66 1.000 57 XS 0.500 12.7 30.0 15.2 219.0 99.3 20 50 20.000 50 SD 0.375 9.5 320.0 15.2 210.0 95.3 30.000 762 20.000 50 XS 0.500 12.7 20.0 190.5 275.0 12.7 2 610 2.000 610 SD 0.375 9.5 60.0 20.7 29.0 135.2 36.000 91 2.000 610 XS 0.500 12.7 600.0 272.2 392.0 177. 1 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. 5- c.
5 Elbows SM 23 & SME S-23 Nominal Pipe Size Outside Diameter [Nominal hickness] 1/2 13 0.0 21 3/ 19 1.050 27 1 25 1.315 33 1 1/ 32 1.660 2 1 1/2 3 1.900 2 51 2.375 60 2 1/2 6 2.75 73 3 76 3.500 9 3 1/2 5 127 9.000 102 102.500 11 5.563 11 6 152 6.625 16 203.625 219 10 25 10.750 273 12 305 12.750 32 1 356 1.000 356 16 06 16.000 06 1 57 1.000 57 20 50 20.000 50 2 610 2.000 610 Identification Po lb kg SD 0.109 2. 0.1 0.0 0.625 16 XS 0.17 3.7 0.1 0.1 SD 0.113 2.9 0.1 0.0 0.750 19 XS 0.15 3.9 0.1 0.1 SD 0.133 3. 0.2 0.1 0.75 22 XS 0.179.5 0.3 0.1 SD 0.10 3.6 0.3 0.1 1.000 25 XS 0.191.9 0.5 0.2 SD 0.15 3.7 0.5 0.2 1.125 29 XS 0.200 5.1 0.6 0.3 SD 0.15 3.9 0. 0. 1.375 35 XS 0.21 5.5 1.1 0.5 SD 0.203 5.2 1.6 0.7 1.750 XS 0.276 7.0 2.0 0.9 SD 0.216 5.5 2.5 1.1 2.000 51 XS 0.300 7.6 3.3 1.5 SD 0.226 5.7 3. 1.5 2.250 57 XS 0.31.1.2 1.9 SD 0.237 6.0.5 2.0 2.500 6 XS 0.337.6 6. 3.1 SD 0.25 6.6 7. 3.5 3.125 79 XS 0.375 9.5 11.0 5.0 SD 0.20 7.1 12.3 5.6 3.750 95 XS 0.32 11.0 17.5 7.9 SD 0.322.2 25.0 11.3 5.000 127 XS 0.500 12.7 35.5 16.1 SD 0.365 9.3.0 20.0 6.250 159 XS 0.500 12.7 53.5 2.3 SD 0.375 9.5 62.5 2.3 7.500 191 XS 0.500 12.7 0.0 36.3 SD 0.375 9.5 0.0 36.3.750 222 XS 0.500 12.7 102.5 6.5 SD 0.375 9.5 103.0 6.7 10.000 25 XS 0.500 12.7 13.0 62.6 SD 0.375 9.5 130.0 59.0 11.250 26 XS 0.500 12.7 170.0 77.1 SD 0.375 9.5 160.0 72.6 12.500 31 XS 0.500 12.7 210.0 95.3 SD 0.375 9.5 230.0 10.3 15.000 31 XS 0.500 12.7 300.0 136.1 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-5
Long Radius10 Return Elbows SM 23 & SME S-23 Nominal Pipe Size Outside Diameter [Nominal hickness] O 10 Return Long Radius K O K Identification lb kg 1/2 3/ 13 19 0.0 1.050 21 27 SD 0.109 2. 0. 0.2 3.000 76 1.75 XS 0.17 3.7 0.5 0.2 SD 0.113 2.9 0. 0.2 2.250 57 1.6 3 XS 0.15 3.9 0.5 0.2 1 1 1/ 1 1/2 2 2 1/2 3 3 1/2 5 6 10 12 1 16 1 20 2 25 32 3 51 6 76 9 102 127 152 203 25 305 356 06 57 50 610 1.315 1.660 1.900 2.375 2.75 3.500.000.500 5.563 6.625.625 10.750 12.750 1.000 16.000 1.000 20.000 2.000 33 2 60 73 9 102 11 11 16 219 273 32 356 06 57 50 610 SD 0.133 3. 0. 0. 3.000 76 2.1 56 XS 0.179.5 1.0 0.5 SD 0.10 3.6 1.2 0.5 3.750 95 2.750 70 XS 0.191.9 1. 0. SD 0.15 3.7 1. 0..500 11 3.250 3 XS 0.200 5.1 2.3 1.0 SD 0.15 3.9 3.2 1.5 6.000 152.1 106 XS 0.21 5.5. 2.0 SD 0.203 5.2 6.5 2.9 7.500 191 5.1 132 XS 0.276 7.0.0 3.6 SD 0.216 5.5 10.0.5 9.000 229 6.250 159 XS 0.300 7.6 13.0 5.9 SD 0.226 5.7 13.5 6.1 10.500 267 7.250 1 XS 0.31.1 16.7 7.6 SD 0.237 6.0 1.0.2 12.000 305.250 210 XS 0.337.6 27.0 12.2 SD 0.25 6.6 31.0 1.1 15.000 31 10.313 262 XS 0.375 9.5.0 20.0 SD 0.20 7.1 9.0 22.2 1.000 57 12.313 313 XS 0.32 11.0 70.0 31. SD 0.322.2 100.0 5. 2.000 610 16.313 1 XS 0.500 12.7 12.0 6. SD 0.365 9.3 176.0 79. 30.000 762 20.375 51 XS 0.500 12.7 21.0 97.1 SD 0.375 9.5 250.0 113. 36.000 91 2.375 619 XS 0.500 12.7 320.0 15.2 SD 0.375 9.5 320.0 15.2 2.000 1067 2.000 711 XS 0.500 12.7 10.0 16.0 SD 0.375 9.5 12.0 16.9.000 1219 32.000 13 XS 0.500 12.7 552.0 250. SD 0.375 9.5 520.0 235.9 5.000 1372 36.000 91 XS 0.500 12.7 60.0 30. SD 0.375 9.5 60.0 290.3 60.000 152 0.000 1016 XS 0.500 12.7 0.0 31.0 SD 0.375 9.5 920.0 17.3 72.000 129.000 1219 XS 0.500 12.7 1200.0 5.3 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. 5-6 c.
Short Radius10 Return Elbows SM 23 & SME S-23 Nominal Pipe Size O.D Outside Diameter [Nominal hickness] 10 Return, Short Radius Identification lb kg 1/2 3/ 1 13 19 25 0.0 1.050 1.315 21 27 33 SD 0.109 2. ----- ----- ----- ----- ----- ----- XS 0.17 3.7 ----- ----- SD 0.113 2.9 ----- ----- ----- ----- ----- ----- XS 0.15 3.9 ----- ----- SD 0.133 3. 0.5 0.2 2.000 51 1.625 1 XS 0.179.5 ----- ----- 1 1/ 32 1.660 2 SD 0.10 3.6 0. 0. 2.500 6 2.063 52 XS 0.191.9 ----- ----- 1 1/2 3 1.900 SD 0.15 3.7 1.1 0.5 3.000 76 2.3 62 XS 0.200 5.1 1.5 0.7 2 51 2.375 60 SD 0.15 3.9 2.0 0.9.000 102 3.1 1 XS 0.21 5.5 3.0 1. 2 1/2 6 2.75 73 SD 0.203 5.2.3 1.9 5.000 127 3.93 100 XS 0.276 7.0 5.6 2.5 3 76 3.500 9 SD 0.216 5.5 6.0 2.7 6.000 152.750 121 XS 0.300 7.6.5 3.9 3 1/2 9.000 102 SD 0.226 5.7 9.0.1 7.000 17 5.500 10 XS 0.31.1 12.0 5. 102.500 11 SD 0.237 6.0 12.5 5.7.000 203 6.250 159 XS 0.337.6 17.0 7.7 5 127 5.563 11 SD 0.25 6.6 19.2.7 10.000 25 7.750 197 XS 0.375 9.5 2.0 12.7 6 152 6.625 16 SD 0.20 7.1 36.0 16.3 12.000 305 9.313 237 XS 0.32 11.0 6.0 20.9 203.625 219 SD 0.322.2 6.0 30. 16.000 06 12.313 313 XS 0.500 12.7 95.0 3.1 10 25 10.750 273 SD 0.365 9.3 116.0 52.6 20.000 50 15.375 391 XS 0.500 12.7 10.0 63.5 12 305 12.750 32 SD 0.375 9.5 160.0 72.6 2.000 610 1.375 67 XS 0.500 12.7 20.0 9.3 1 356 1.000 356 SD 0.375 9.5 210.0 95.3 2.000 711 21.000 533 XS 0.500 12.7 20.0 127.0 16 06 16.000 06 SD 0.375 9.5 26.0 119.7 32.000 13 2.000 610 XS 0.500 12.7 3.0 157.9 1 57 1.000 57 SD 0.375 9.5 33.0 151.5 36.000 91 27.000 66 XS 0.500 12.7 3.0 19.7 20 50 20.000 50 SD 0.375 9.5 20.0 190.5 0.000 1016 30.000 762 XS 0.500 12.7 550.0 29.5 2 610 2.000 610 SD 0.375 9.5 596.0 270.3.000 1219 36.000 91 XS 0.500 12.7 7.0 355.6 O K1 O K1 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-7
Reducers SM 23 & SME S-23 Large Diameter Small Diameter H [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 3/ 19 1.050 1 25 1.315 1 1/ 32 1.660 1 1/2 3 1.900 2 51 2.375 2 1/2 6 2.75 3 76 3.500 3 1/2 9.000 102.500 5 127 5.563 27 33 2 60 73 9 102 11 11 3/ 10 0.675 17 0.2 0.1 0.3 0.1 1.500 3 0.113 2.9 0.15 3.9 1/2 13 0.0 21 0.2 0.1 0.3 0.1 3/ 10 0.675 17 0.3 0.1 0. 0.2 1/2 13 0.0 21 2.000 51 0.133 3. 0.3 0.1 0.179.5 0. 0.2 3/ 19 1.050 27 0.3 0.1 0. 0.2 1/2 13 0.0 21 0.5 0.2 0.5 0.2 3/ 19 1.050 27 2.000 51 0.10 3.6 0.5 0.2 0.191.9 0.5 0.2 1 25 1.315 33 0.5 0.2 0.6 0.3 1/2 13 0.0 21 0.5 0.2 0.6 0.3 3/ 19 1.050 27 0.5 0.2 0.6 0.3 2.500 6 0.15 3.7 0.200 5.1 1 25 1.315 33 0.6 0.3 0.7 0.3 1 1/ 32 1.660 2 0.6 0.3 0. 0. 3/ 19 1.050 27 0. 0. 1.0 0.5 1 25 1.315 33 0.9 0. 1.0 0.5 3.000 76 0.15 3.9 0.21 5.5 1 1/ 32 1.660 2 0.9 0. 1.1 0.5 1 1/2 3 1.900 0.9 0. 1.2 0.5 1 25 1.315 33 1.3 0.6 1.7 0. 1 1/ 32 1.660 2 1. 0.6 1.7 0. 3.500 9 0.203 5.2 0.276 7.0 1 1/2 3 1.900 1.5 0.7 1. 0. 2 51 2.375 60 1.6 0.7 2.0 0.9 1 1/ 32 1.660 2 1.7 0. 2.2 1.0 1 1/2 3 1.900 1. 0. 2.1 1.0 3.500 9 0.216 5.5 0.300 7.6 2 51 2.375 60 2.0 0.9 2.6 1.2 2 1/2 6 2.75 73 2.1 1.0 2. 1.3 1 1/2 3 1.900 2.5 1.1 3.1 1. 2 51 2.375 60 2.7 1.2 3.5 1.6.000 102 0.226 5.7 0.31.1 2 1/2 6 2.75 73 2.9 1.3 3. 1.7 3 76 3.500 9 3.0 1..0 1. 1 1/2 3 1.900 2.7 1.2 3. 1.7 2 51 2.375 60 3.1 1. 3.9 1. 2 1/2 6 2.75 73.000 102 0.237 6.0 3.3 1.5 0.337.6. 2.0 3 76 3.500 9 3.5 1.6.7 2.1 3 1/2 9.000 102 3.6 1.6. 2.2 2 51 2.375 60 5.0 2.3 6.6 3.0 2 1/2 6 2.75 73 5.5 2.5 7.2 3.3 3 76 3.500 9 5.000 127 0.25 6.6 5.7 2.6 0.375 9.5 7. 3.5 3 1/2 9.000 102 5. 2.6.0 3.6 102.500 11 5.9 2.7.3 3. H H Concentric Reducer Eccentric Reducer 5- c.
Reducers SM 23 & SME S-23 Large Diameter Small Diameter H [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 2 1/2 6 2.75 73 7.6 3. 9.9.5 3 76 3.500 9.0 3.6 11.1 5.0 6 152 6.625 16 3 1/2 9.000 102 5.500 10 0.20 7.1.1 3.7 0.32 11.0 11.6 5.3 102.500 11.1 3.7 12.0 5. 5 127 6.625 16.6 3.9 12.6 5.7 3 1/2 9.000 102 12. 5. 16.1 7.3 203.625 219 102.500 11 13.1 5.9 1.6. 6.000 152 0.322.2 0.500 12.7 5 127 5.563 11 13. 6.1 19.5. 6 152 6.625 16 13.9 6.3 20. 9.3 102.500 11 21.1 9.6 25.3 11.5 10 25 10.750 273 5 127 5.563 11 21. 9.9 2.7 13.0 7.000 17 0.365 9.3 0.500 12.7 6 152 6.625 16 22.3 10.1 29.7 13.5 203.625 219 23.2 10.5 31. 1.2 5 127 5.563 11 30.5 13. 39.1 17.7 12 305 12.750 32 6 152 6.625 16 31.1 1.1 0.6 1..000 203 0.375 9.5 0.500 12.7 203.625 219 32.1 1.6 37. 17.0 10 25 10.750 273 33. 15.2 3.6 19. 6 152 6.625 16 55.0 2.9 7.0 33.6 1 356 1.000 356 203.625 219 57.0 25.9 76.0 3.5 13.000 330 0.375 9.5 0.500 12.7 10 25 10.750 273 60.0 27.2 79.0 35. 12 305 12.750 32 63.0 2.6 3.0 37.6 203.625 219 70.0 31. 93.0 2.2 16 06 16.000 06 10 25 10.750 273 72.0 32.7 96.0 3.5 1.000 356 0.375 9.5 0.500 12.7 12 305 12.750 32 75.0 3.0 99.0.9 1 356 1.000 356 77.0 3.9 102.0 6.3 10 25 10.750 273 6.0 39.0 11.0 51.7 1 57 1.000 57 12 305 12.750 32 9.0 0. 11.0 53.5 15.000 31 0.375 9.5 0.500 12.7 1 356 1.000 356 90.0 0. 120.0 5. 16 06 16.000 06 9.0 2.6 123.0 55. 12 305 12.750 32 13.0 60. 176.0 79. 20 50 20.000 50 1 356 1.000 356 135.0 61.2 179.0 1.2 20.000 50 0.375 9.5 0.500 12.7 16 06 16.000 06 13.0 62.6 12.0 2.6 1 57 1.000 57 12.0 6. 16.0. 1 356 1.000 356 15.0 71.7 209.0 9. 2 610 2.000 610 16 06 16.000 06 20.000 50 0.375 9.5 160.0 72.6 0.500 12.7 211.0 95.7 1 57 1.000 57 163.0 73.9 215.0 97.5 20 50 20.000 50 167.0 75. 220.0 99. a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-9
ees SM 23 & SME S-23 Run Outlet C M [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 1/ 6 0.50 1 1.000 25 0. 0.2 0.5 0.2 1/2 13 0.0 21 3/ 10 0.675 17 1.000 25 1.000 25 0.109 2. 0. 0.2 0.126 3.2 0.5 0.2 1/2 13 0.0 21 1.000 25 0. 0.2 0.5 0.2 3/ 10 0.675 17 1.125 29 0.5 0.2 0.6 0.3 3/ 19 1.050 27 1/2 13 0.0 21 1.125 29 1.125 29 0.113 2.9 0.5 0.2 0.15 3.9 0.6 0.3 3/ 19 1.050 27 1.125 29 0.5 0.2 0.6 0.3 1/2 13 0.0 21 1.500 3 0.6 0.3 0. 0. 1 25 1.315 33 3/ 19 1.050 27 1.500 3 1.500 3 0.133 3. 0.6 0.3 0.179.5 0. 0. 1 25 1.315 33 1.500 3 0.6 0.3 0. 0. 1/2 13 0.0 21 1.75 1.2 0.5 1. 0.6 1 1/ 32 1.660 2 3/ 19 1.050 27 1.75 1.2 0.5 1. 0.6 1.75 0.10 3.6 0.191.9 1 25 1.315 33 1.75 1.2 0.5 1. 0.6 1 1/ 32 1.660 2 1.75 1.2 0.5 1. 0.6 1/2 13 0.0 21 2.250 57 1.7 0. 2.1 1.0 3/ 19 1.050 27 2.250 57 1.7 0. 2.1 1.0 1 1/2 3 1.900 1 25 1.315 33 2.250 57 2.250 57 0.15 3.7 1.7 0. 0.200 5.1 2.1 1.0 1 1/ 32 1.660 2 2.250 57 1.7 0. 2.1 1.0 1 1/2 3 1.900 2.250 57 1.7 0. 2.1 1.0 3/ 19 1.050 27 1.750.2 1.9.1 1.9 1 25 1.315 33 2.000 51.2 1.9.1 1.9 2 51 2.375 60 1 1/ 32 1.660 2 2.500 6 2.250 57 0.15 3.9.2 1.9 0.21 5.5.1 1.9 1 1/2 3 1.900 2.375 60.2 1.9.1 1.9 2 51 2.375 60 2.500 6.2 1.9.1 1.9 1 25 1.315 33 2.250 57 6. 3.1 6. 3.1 1 1/ 32 1.660 2 2.500 6 6. 3.1 6. 3.1 2 1/2 6 2.75 73 1 1/2 3 1.900 3.000 76 2.625 67 0.203 5.2 6. 3.1 0.276 7.0 6. 3.1 2 51 2.375 60 2.750 70 5.9 2.7 6. 3.1 2 1/2 6 2.75 73 3.000 76 5.9 2.7 6. 3.1 1 1/ 32 1.660 2 2.750 70. 3. 10.0.5 1 1/2 3 1.900 2.75 73. 3. 10.0.5 3 76 3.500 9 2 51 2.375 60 3.375 6 3.000 76 0.216 5.5. 3. 0.300 7.6 10.0.5 2 1/2 6 2.75 73 3.250 3. 3. 10.0.5 3 76 3.500 9 3.375 6. 3. 10.0.5 1 1/2 3 1.900 3.125 79 11.0 5.0 1.0 6. 2 51 2.375 60 3.250 3 11.0 5.0 1.0 6. 3 1/2 9.000 102 2 1/2 6 2.75 73 3.750 95 3.500 9 0.226 5.7 11.0 5.0 0.31.1 1.0 6. 3 76 3.500 9 3.625 92 11.0 5.0 1.0 6. 3 1/2 9.000 102 3.750 95 11.0 5.0 1.0 6. 1 1/2 3 1.900 3.375 6 13.0 5.9 19.0.6 2 51 2.375 60 3.500 9 13.0 5.9 19.0.6 102.500 11 2 1/2 6 2.75 73 3.750 95 13.0 5.9 19.0.6.125 105 0.237 6.0 0.337.6 3 76 3.500 9 3.75 9 13.0 5.9 19.0.6 3 1/2 9.000 102.000 102 13.0 5.9 19.0.6 9.500 11.125 105 13.0 5.9 19.0.6 2 51 2.375 60.125 105 22.0 10.0 2.0 12.7 2 1/2 6 2.75 73.250 10 22.0 10.0 2.0 12.7 5 127 5.563 11 3 76 3.500 9.375 111 22.0 10.0 2.0 12.7.75 12 0.25 6.6 0.375 9.5 3 1/2 9.000 102.500 11 22.0 10.0 2.0 12.7 102.500 11.625 117 22.0 10.0 2.0 12.7 5 127 5.563 11.75 12 22.0 10.0 2.0 12.7 M M C C Straight ee C C Reducing ee 5-10 c.
ees SM 23 & SME S-23 lb kg lb kg 10 25 1 57 Run 12.750 1.000.625 219 10.750 273 32 1.000 356 16 06 16.000 06 57 Outlet 2 1/2 6 2.75 73.750 121 33.0 15.0 2.0 19.1 3 76 3.500 9.75 12 33.0 15.0 2.0 19.1 3 1/2 9.000 102 5.000 127 33.0 15.0 2.0 19.1 5.625 13 0.20 7.1 11.0 102.500 11 5.125 130 33.0 15.0 2.0 19.1 5 127 5.563 11 5.375 137 36.0 16.3 2.0 19.1 6 152 6.625 16 5.625 13 36.0 16.3 2.0 19.1 3 1/2 9.000 102 6.000 152 61.0 27.7 76.0 3.5 102.500 11 6.125 156 61.0 27.7 76.0 3.5 5 127 5.563 11 7.000 17 6.375 162 0.322.2 61.0 27.7 0.500 12.7 76.0 3.5 6 152 6.625 16 6.625 16 61.0 27.7 76.0 3.5 203.625 219 7.000 17 61.0 27.7 76.0 3.5 102.500 11 7.250 1.0 39.9 116.0 52.6 5 127 5.563 11 7.500 191.0 39.9 116.0 52.6 6 152 6.625 16.500 216 7.625 19 0.365 9.3.0 39.9 0.500 12.7 116.0 52.6 203.625 219.000 203.0 39.9 116.0 52.6 10 25 10.750 273.500 216 91.0 1.3 129.0 5.5 5 127 5.563 11.500 216 13.0 6.9 10.0 1.6 6 152 6.625 16.625 219 13.0 6.9 10.0 1.6 203.625 219 10.000 25 9.000 229 0.375 9.5 13.0 6.9 0.500 12.7 10.0 1.6 10 25 10.750 273 9.500 21 17.0 66.7 17.0. 12 305 12.750 32 10.000 25 17.0 66.7 17.0. 6 152 6.625 16 9.375 23 217.0 9. 26.0 121.6 203.625 219 9.750 2 217.0 9. 26.0 121.6 10 25 10.750 273 11.000 279 10.125 257 0.375 9.5 217.0 9. 0.500 12.7 26.0 121.6 12 305 12.750 32 10.625 270 226.0 102.5 20.0 127.0 1 356 1.000 356 11.000 279 226.0 102.5 20.0 127.0 6 152 6.625 16 10.375 26 235.0 106.6 352.0 159.7 203.625 219 10.750 273 235.0 106.6 352.0 159.7 10 25 10.750 273 11.125 23 235.0 106.6 352.0 159.7 12.000 305 0.375 9.5 0.500 12.7 12 305 12.750 32 11.625 295 22.0 109. 359.0 162. 1 356 1.000 356 12.000 305 22.0 109. 369.0 167. 16 06 16.000 06 12.000 305 22.0 109. 369.0 167. 203.625 219 11.750 29 319.0 1.7 322.0 16.1 10 25 10.750 273 12.125 30 319.0 1.7 322.0 16.1 12 305 12.750 32 12.625 321 333.0 151.0 339.0 153. 13.500 33 0.375 9.5 0.500 12.7 1 356 1.000 356 13.000 330 333.0 151.0 25.0 192. 16 06 16.000 06 13.000 330 333.0 151.0 25.0 192. 1 57 1.000 57 13.500 33 333.0 151.0 25.0 192. 203.625 219 12.750 32 2.0 21.6 2.0 21.6 10 25 10.750 273 13.125 333 2.0 21.6 2.0 21.6 12 305 12.750 32 13.625 36 93.0 223.6 93.0 223.6 1 356 1.000 356 31 1.000 356 0.375 9.5 93.0 223.6 0.500 12.7 93.0 223.6 16 06 16.000 06 1.000 356 50.0 22.6 50.0 22.6 1 57 1.000 57 1.500 36 50.0 22.6 50.0 22.6 20 50 20.000 50 15.000 31 50.0 22.6 53.0 26. 10 25 10.750 273 15.125 3 2.0 192.3 509.0 230.9 12 305 12.750 32 15.625 397 506.0 229.5 509.0 230.9 1 356 1.000 356 16.000 06 506.0 229.5 509.0 230.9 16 06 16.000 06 32 16.000 06 0.375 9.5 506.0 229.5 0.500 12.7 509.0 230.9 1 57 1.000 57 16.500 19 601.0 272.6 63.0 309. 20 50 20.000 50 17.000 32 601.0 272.6 63.0 309. 2 610 2.000 610 17.000 32 765.0 37.0 93.0 23.7 20 50 20.000 50 15.000 2 610 2.000 610 17.000 C M [Nominal] Standard 6 152 6.625 16 0.32 203 12 305 1 356 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. [Nominal] Extra Strong arwick c. 5-11
E Caps SM 23 & SME S-23 Nominal Pipe Size Identification lb kg SD 0.109 2. 0.2 0.1 1/2 13 0.0 21 1.000 25 XS 0.17 3.7 0.2 0.1 1 25 1.315 33 1 1/ 32 1.660 2 1 1/2 3 1.900 2 51 2.375 60 2 1/2 6 2.75 73 3 76 3.500 9 3 1/2 9.000 102 102.500 11 5 127 6 152 Outside Diameter 3/ 19 1.050 27 5.563 11 6.625 16 203.625 219 10 25 10.750 273 12 305 12.750 32 1 356 1.000 356 16 06 16.000 06 1 57 1.000 57 20 50 20.000 50 2 610 2.000 610 [Nominal hickness] SD 0.113 2.9 0.2 0.1 1.000 25 XS 0.15 3.9 0.2 0.1 SD 0.133 3. 0.2 0.1 1.500 3 XS 0.179.5 0.3 0.1 SD 0.10 3.6 0.3 0.1 1.500 3 XS 0.191.9 0. 0.2 SD 0.15 3.7 0. 0.2 1.500 3 XS 0.200 5.1 0.5 0.2 SD 0.15 3.9 0.6 0.3 1.500 3 XS 0.21 5.5 0. 0.3 SD 0.203 5.2 0.9 0. 1.500 3 XS 0.276 7.0 1.0 0.5 SD 0.216 5.5 1.5 0.7 2.000 51 XS 0.300 7.6 1. 0. SD 0.226 5.7 2.0 0.9 2.500 6 XS 0.31.1 2.5 1.1 SD 0.237 6.0 2.5 1.1 2.500 6 XS 0.337.6 3.0 1. SD 0.25 6.6.5 2.0 3.000 76 XS 0.375 9.5 5.5 2.5 SD 0.20 7.1 6.5 2.9 3.500 9 XS 0.32 11.0 9.0.1 SD 0.322.2 12.0 5..000 102 XS 0.500 12.7 16.0 7.3 SD 0.365 9.3 20.0 9.1 5.000 127 XS 0.500 12.7 25.0 11.3 SD 0.375 9.5 30.0 13.6 6.000 152 XS 0.500 12.7 36.0 16.3 SD 0.375 9.5 36.0 16.3 6.500 165 XS 0.500 12.7 5.0 20. SD 0.375 9.5 0.0 1.1 7.000 17 XS 0.500 12.7 5.0 2.5 SD 0.375 9.5 5.0 2.5.000 203 XS 0.500 12.7 72.0 32.7 SD 0.375 9.5 75.0 3.0 9.000 229 XS 0.500 12.7 6.0 39.0 SD 0.375 9.5 96.0 3.5 10.500 267 XS 0.500 12.7 130.0 59.0 E a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME 36.10 c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. 5-12 c.
Couplings SM 105 & SME S-105 SME 16.11, Class 3000 Nominal Pipe Size C D E F G H Coupling Half Coupling 1/ 1.250 0.750 0.625 0.20 0.375 0.750 1.000 0.250 0.13 0.07 3 32 19 16 11 10 19 25 6 0.1 0.03 1/ 1.375 0.750 0.6 0.555 0.375 0.75 1.000 0.250 0.13 0.07 6 35 19 17 1 10 22 25 6 0.1 0.03 3/ 1.500 0.75 0.750 0.690 0.3 1.000 1.125 0.250 0.31 0.16 10 3 22 19 1 11 25 29 6 0.1 0.1 1/2 1.75 1.125 1.313 0.55 0.500 1.250 1.375 0.375 0.25 0.13 13 29 33 22 13 32 35 10 0.1 0.1 3/ 2.000 1.375 1.000 1.065 0.563 1.500 1.500 0.375 0. 0.22 19 51 35 25 27 1 3 3 10 0.2 0.1 1 2.375 1.750 1.1 1.330 0.625 1.750 1.750 0.500 0.63 0.32 25 60 30 3 16 13 0.3 0.1 1 1/ 2.625 2.25 1.313 1.675 0.6 2.250 1.75 0.500 1.56 0.7 32 67 57 33 3 17 57 13 0.7 0. 1 1/2 3.125 2.500 1.563 1.915 0.750 2.500 2.000 0.500 2.19 1.10 3 79 6 0 9 19 6 51 13 1.0 0.5 2 3.375 3.000 1.6 2.06 0.75 3.000 2.500 0.750.50 2.25 51 6 76 3 61 22 76 6 19 2.0 1.0 2 1/2 3.625 3.625 1.13 2.906 0.75 3.625 2.500 0.750 6.25 3.13 6 92 92 6 7 22 92 6 19 2. 1. 3.250.250 2.125 3.535 1.000.250 2.750 0.750 6.75 3.3 76 10 10 5 90 25 10 70 19 3.1 1.5.750 5.500 2.375.55 1.125 5.500 3.000 0.750 16.75.3 102 121 10 60 115 29 10 76 19 7.6 3. lb kg lb kg G G C E H E E D F D F hreaded Coupling hreaded Half-Coupling Socket-Welding Coupling Socket-Welding Half-Coupling lso available, tegrally Reinforced Forged ranch Outlet Fittings. (/S-12, MSS-SP 97) uttwelding hreaded Socket Welding arwick c. 5-13
Flanges SM 105 & SME S-105 Class 150 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y3 1 2 3 r D R Po Po 3/ 3. 0. 0.50 1.50 1.05 0.56 0.62 2.00 0.62 1.09 1.11 0.2 0.12 0. 1.69 19 9 11 13 3 27 1 16 51 16 2 2 21 3 11 3 1.25 0.50 0.56 1.9 1.32 0.62 0.69 2.12 0.69 1.36 1.3 1.05 0.12 0.50 2.00 25 10 13 1 9 3 16 1 5 1 35 35 27 3 13 51 1 1/.62 0.56 0.62 2.31 1.66 0.75 0.1 2.19 0.1 1.70 1.72 1.3 0.19 0.56 2.50 32 117 1 16 59 2 19 21 56 21 3 35 5 1 6 1 1/2 5.00 0.62 0.69 2.56 1.90 0.1 0. 2.3 0. 1.95 1.97 1.61 0.25 0.62 2. 3 127 16 1 65 21 22 60 22 50 50 1 6 16 73 2 6.00 0.69 0.75 3.06 2.3 0.9 1.00 2. 1.00 2. 2.6 2.07 0.31 0.69 3.62 51 152 17 19 7 60 2 25 62 25 62 62 53 1 92 2 1/2 7.00 0.1 0. 3.56 2. 1.06 1.12 2.69 1.12 2.9 2.97 2.7 0.31 0.75.12 6 17 21 22 90 73 27 2 6 2 75 75 63 19 105 3 7.50 0. 0.9.25 3.50 1.12 1.19 2.69 1.19 3.57 3.60 3.07 0.3 0.1 5.00 76 191 22 2 10 9 2 30 6 30 91 91 7 10 21 127 9.00 0. 0.9 5.31.50 1.25 1.31 2.9 1.31.57.60.03 0. ----- 6.19 102 229 22 2 135 11 32 33 75 33 116 117 102 11 ----- 157 5 10.00 0. 0.9 6. 5.56 1.3 1. 3. 1. 5.66 5.69 5.05 0. ----- 7.31 127 25 22 2 16 11 35 37 7 37 1 15 12 11 ----- 16 6 11.00 0.9 1.00 7.56 6.63 1.50 1.56 3. 1.56 6.72 6.75 6.07 0.50 -----.50 152 279 2 25 192 16 3 0 7 0 171 171 15 13 ----- 216 13.50 1.06 1.12 9.69.63 1.69 1.75 3.9 1.75.72.75 7.9 0.50 ----- 10.62 203 33 27 2 26 219 3 100 221 222 203 13 ----- 270 10 16.00 1.12 1.19 12.00 10.75 1. 1.9 3.9 1.9 10. 10.92 10.02 0.50 ----- 12.75 25 06 2 30 305 273 9 100 9 276 277 255 13 ----- 32 12 19.00 1.19 1.25 1.3 12.75 2.12 2.19. 2.19 12. 12.92 12.00 0.50 ----- 15.00 305 3 30 32 365 32 5 56 113 56 327 32 305 13 ----- 31 1 21.00 1.31 1.3 15.75 1.00 2.19 3.12.9 2.25 1.1 1.1 0.50 ----- 16.25 356 533 33 35 00 356 56 79 125 57 359 360 13 ----- 13 16 23.50 1.3 1. 1.00 16.00 2. 3..9 2.50 16.16 16.19 0.50 ----- 1.50 06 597 35 37 57 06 62 7 125 6 10 11 13 ----- 70 1 25.00 1.50 1.56 19. 1.00 2.62 3.1 5. 2.69 1.1 1.20 0.50 ----- 21.00 57 635 3 0 505 57 67 97 13 6 62 62 13 ----- 533 20 27.50 1.62 1.69 22.00 20.00 2.1.06 5.62 2. 20.20 20.25 0.50 ----- 23.00 50 699 1 3 559 50 71 103 13 73 513 51 13 ----- 5 2 32.00 1.1 1. 26.12 2.00 3.19.3 5.9 3.25 2.25 2.25 0.50 ----- 27.25 610 13 6 663 610 1 111 151 3 616 616 13 ----- 692 Must be specified at time of purchase 5-1 c.
Flanges SM 105 & SME S-105 Class 150 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Nominal Size Pipe () Size Y1 W X 1 lb kg a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Dimension: SME 16.5 Class 150 (Others Class available on request). c). Maximum llowable Working Pressure: See SME 16.5 able F2-1.1 material group 1.1, or contact our technical representatives. lb kg lb kg lb kg 2.75 5/ 2.0 2.0 2.0 2.0 3/ 70 16 0.9 0.9 0.9 0.9 19 3.12 5/ 2.0 2.0 3.0 2.0 1 79 16 0.9 0.9 1. 0.9 25 3.50 5/ 3.0 3.0 3.0 3.0 1 1/ 9 16 1. 1. 1. 1. 32 3. 5/ 3.0 3.0.0.0 1 1/2 9 16 1. 1. 1. 1. 3.75 3/ 5.0 5.0 6.0 5.0 2 121 19 2.3 2.3 2.7 2.3 51 5.50 3/ 7.0 7.0.0 7.0 2 1/2 10 19 3.2 3.2 3.6 3.2 6 6.00 3/.0.0 10.0 9.0 3 152 19 3.6 3.6.5.1 76 7.50 3/ 13.0 13.0 15.0 17.0 191 19 5.9 5.9 6. 7.7 102.50 7/ 15.0 15.0 19.0 20.0 5 216 22 6. 6..6 9.1 127 9.50 7/ 19.0 19.0 2.0 26.0 6 21 22.6.6 10.9 11. 152 11.75 7/ 30.0 30.0 39.0 5.0 29 22 13.6 13.6 17.7 20.5 203 1.25 1 3.0 3.0 52.0 70.0 10 12 362 25 19.5 19.5 23.6 31. 25 17.00 1 6.0 6.0 0.0 110.0 12 12 32 25 29.1 29.1 36. 50.0 305 1.75 1 1/ 90.0 105.0 110.0 10.0 1 12 76 29 0.9 7.7 50.0 63.6 356 21.25 1 1/ 9.0 10.0 10.0 10.0 16 16 50 29.5 63.6 63.6 1. 06 22.75 1 1/ 130.0 160.0 150.0 220.0 1 16 57 32 59.1 72.7 6.2 100.0 57 25.00 1 1/ 165.0 195.0 10.0 25.0 20 20 635 32 75.0.6 1. 129.5 50 29.50 1 3/ 220.0 275.0 260.0 30.0 2 20 79 35 100.0 125.0 11.2 195.5 610 F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. 5-15
Flanges SM 105 & SME S-105 Class 300 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y3 1 2 3 r D R 3/.62 0.56 0.62 1. 1.05 0.9 1.00 2.19 0.62 1.09 1.11 0.2 0.12 0. 1.69 19 117 1 16 27 2 25 56 16 2 2 21 3 11 3 1. 0.62 0.69 2.12 1.32 1.00 1.06 2.3 0.69 1.36 1.3 1.05 0.12 0.50 2.00 25 12 16 1 5 3 25 27 60 1 35 35 27 3 13 51 1 1/ 5.25 0.69 0.75 2.50 1.66 1.00 1.06 2.50 0.1 1.70 1.72 1.3 0.19 0.56 2.50 32 133 1 19 6 2 25 27 6 21 3 35 5 1 6 1 1/2 6.12 0.75 0.1 2.75 1.90 1.13 1.19 2.63 0. 1.95 1.97 1.61 0.25 0.63 2. 3 155 19 21 70 29 30 67 22 50 50 1 6 16 73 2 6.50 0.1 0. 3.31 2.3 1.25 1.31 2.69 1.12 2. 2.6 2.07 0.31 0.69 3.62 51 165 21 22 60 32 33 6 2 62 62 53 17 92 2 1/2 7.50 0.9 1.00 3.9 2. 1. 1.50 2.9 1.25 2.9 2.97 2.7 0.31 0.75.12 6 191 2 25 100 73 37 3 75 32 75 75 63 19 105 3.25 1.06 1.12.62 3.50 1.63 1.69 3.06 1.25 3.57 3.60 3.07 0.3 0.1 5.00 76 210 27 2 117 9 1 3 7 32 91 91 7 10 21 127 10.00 1.19 1.25 5.75.50 1.2 1. 3.32 1..57.60.03 0. ----- 6.19 102 25 30 32 16 11 6 37 116 117 102 11 ----- 157 5 11.00 1.31 1.3 7.00 5.56 1.9 2.00 3.2 1.69 5.66 5.69 5.05 0. ----- 7.31 127 279 33 35 17 11 9 51 97 3 1 15 12 11 ----- 16 6 12.50 1.3 1..12 6.63 2.00 2.06 3.2 1.1 6.72 6.75 6.07 0.50 -----.50 152 31 35 37 206 16 51 52 97 6 171 171 15 13 ----- 216 15.00 1.56 1.62 10.25.63 2.3 2..32 2.00.72.75 7.9 0.50 ----- 10.62 203 31 0 1 260 219 60 62 110 51 221 222 203 13 ----- 270 10 17.50 1.1 1. 12.62 10.75 2.56 3.75.56 2.19 10. 10.92 10.02 0.50 ----- 12.75 25 5 6 321 273 65 95 116 56 276 277 255 13 ----- 32 12 20.50 1.9 2.00 1.75 12.75 2.2.00 5.06 2.3 12. 12.92 12.00 0.50 ----- 15.00 305 521 9 51 375 32 72 102 129 60 327 32 305 13 ----- 31 1 23.00 2.06 2.12 16.75 1.00 2.9.3 5.56 2.50 1.1 1.1 0.50 ----- 16.25 356 5 52 5 25 356 75 111 11 6 359 360 13 ----- 13 16 25.50 2.19 2.25 19.00 16.00 3.19.75 5.69 2.69 16.16 16.19 0.50 ----- 1.50 06 6 56 57 3 06 1 121 15 6 10 11 13 ----- 70 1 2.00 2.31 2.3 21.00 1.00 3. 5.12 6.19 2.75 1.1 1.20 0.50 ----- 21.00 57 711 59 60 533 57 7 130 157 70 62 62 13 ----- 533 20 30.50 2. 2.50 23.12 20.00 3.69 5.50 6.32 2. 20.20 20.25 0.50 ----- 23.00 50 775 62 6 57 50 9 10 161 73 513 51 13 ----- 5 2 36.00 2.69 2.75 27.62 2.00.13 6.00 6.56 3.25 2.25 2.25 0.50 ----- 27.25 610 91 6 70 702 610 105 152 167 3 616 616 13 ----- 692 Must be specified at time of purchase 5-16 c.
Flanges SM 105 & SME S-105 Class 300 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Size () Y1 W X 1 lb kg a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Dimension: SME 16.5 Class 300 (Others Class available on request). c. Maximum llowable Working Pressure: See SME 16.5 able F2-1.1 material group 1.1, or contact our technical representatives. lb kg lb kg lb kg 3.25 3/ 3.0 3.0 3.0 3.0 3/ 3 19 1. 1. 1. 1. 19 3.50 3/ 3.0 3.0.0 3.0 1 9 19 1. 1. 1. 25 3. 3/.0.0 5.0.0 1 1/ 99 19 1. 2.3 1. 32.50 7/ 6.0 6.0 7.0 6.0 1 1/2 11 22 2.7 3.2 2.7 3 5.00 3/ 7.0 7.0 9.0.0 2 127 19 3.2 3.2.1 3.6 51 5. 7/ 10.0 10.0 12.0 12.0 2 1/2 19 22.5.5 5.5 5.5 6 6.62 7/ 13.0 13.0 15.0 16.0 3 16 22 5.9 5.9 6. 7.3 76 7. 7/ 22.0 22.0 25.0 27.0 200 22 10.0 10.0 11. 12.3 102 9.25 7/ 2.0 2.0 32.0 35.0 5 235 22 12.7 12.7 1.5 15.9 127 10.62 7/ 39.0 39.0 2.0 50.0 6 12 270 22 17.7 17.7 19.1 22.7 152 13.00 1 5.0 5.0 67.0 1.0 12 330 25 26. 26. 30.5 36. 203 15.25 1 1/ 1.0 91.0 91.0 125.0 10 16 37 29 36. 1. 1. 56. 25 17.75 1 1/ 115.0 10.0 10.0 15.0 12 16 51 32 52.3 63.6 63.6.1 305 20.25 1 1/ 165.0 190.0 10.0 250.0 1 20 51 32 75.0 6. 1. 113.6 356 22.50 1 3/ 190.0 250.0 250.0 295.0 16 20 572 35 6. 113.6 113.6 13.1 06 2.75 1 3/ 250.0 295.0 320.0 395.0 1 2 629 35 113.6 13.1 15.5 179.5 57 27.00 1 3/ 315.0 370.0 00.0 505.0 20 2 66 35 13.2 16.2 11. 229.5 50 32.00 1 5/ 75.0 550.0 50.0 790.0 2 2 13 1 215.9 250.0 263.6 359.1 610 F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. 5-17
Manways Dished cover Hinged arm side of tank ( Clear access ) Concrete wall of tank or Stainless steel tank Grout Ring ( Outside diameter ) Open position dished manway Closed position dished manway a. Design can be different from illustration. Contact DI representative for actual design. b. Material : Stainless Steel 30L, 316L. Other alloys available upon request. c. Dim '''' available from 2'' up to ''. Dim '''' from 20'' up to 2'' arwick c. 6-1
Quick Opening Clean-Out I.D. side Diameter Po. lb kg 3 76 0.125 3.2 2.500 6 10.750 273 11.0 5.0 102 0.125 3.2 3.000 76 11.000 279 13.0 5.9 6 152 0.125 3.2 3.500 9 12.250 311 20.0 9.1 203 0.10 3.6.000 102 12.000 305 2.0 12.7 10 25 0.10 3.6 5.000 127 1.500 36 3.0 15. 12 305 0.10 3.6 6.000 152 15.500 39.0 20.0 1 356 0.1. 7.000 17 1.000 57 60.0 27.2 16 06 0.1..000 203 19.250 9 0.0 36.3 Fabricated for an easy installation at the end of pipe or on elbows. It offers a quick and easy access to the interior of pipe for inspection and cleaning. General Note: a. Material : Stainless Steel 30L 6-2 c.
Grooved Style Clean-Outs Nominal Diameter inches in in in 3 76 0.216 5.5 3.500 9 2.750 70 102 0.237 6.0.500 11 2.750 70 6 152 0.20 7.1 6.625 16 2.750 70 Collar [Note (1)] SCH 0S Pipe he cover of this type of clean-out is provided with a snugly fitting plug, which provides a smooth bore on the interior of the pipe, thus eliminating stock hang-up. a. Material: Stainless Steel 316L. b. vailable upon request in larger size. Note: 1. Usually provided with a Victaulic collar Style 7 Snap-Joint. arwick c. 6-3
Diamond Clean-Outs Outside Weld side Weld Grinded smooth. Clean-out For installation on number 90 Elbows 5 Elbows Reducers Pipe in / in / in / in / in / # # 6 # # 10 # 12 6 10 12 to 1 6 10 12 to 1 6 & 10 12 to 16 1 to 22 2 & larger 6 & 10 12 to 16 1 to 22 2 & larger 102 152 203 25 300 to 50 102 152 203 25 300 to 50 152 203 & 25 30 to 06 57 to 559 610 & larger 13 203 & 25 30 to 06 57 to 559 610 & larger a. Constructed of all 316L Stainless Steel parts, including the wing nut. b. High sealing strengths (the higher the pressure the tighter cover seals). c. Permit quick flushing when installed on both sides of pumps and valves without removing bolted connections. d. Quick and easy visual access into piping systems, tanks and vessels. e. No tools required to open. 6- c.
Cut and Rolled Groove daptors SCH 0S I.D Pipe or Fitting SCH 0S I.D Pipe or Fitting 3" 3 1/2" From 3'' to 12'' in diameter From 1 Diameter and larger Cut Groove for use with I.D. Pipes and Fittings SCH 0S Cut Groove for use with Pipes and Fittings Sch 5S, 10S and 0S 3" 3'' Designated Lengths Rolled Groove and GS (1) for use with I.D. and Pipes and Fittings a. Material : Stainless Steel 30L, 316L. Other alloys available upon request. b. vailable from stock in sizes 3'' to 12'' with standard groove. c. Larger sizes and other adaptor styles available upon request for both I.D. & pipe. Note: 1. For use with Victaulic flexible and rigid collar GS (dvance Groove System) for 1 to 2, Sch 10S arwick c. 6-5
Metal to Metal Flange. " Galvanized Steel acking Flanges " Mainly used on the headbox approach piping. General Note: a. Material : Stainless Steel 30L, 316L. b. Fabricated upon request in size '' and larger. c. side finish: 32 micro inch or electropolishing on request. d. Design can be different from illustration. Contact DI representative for actual design. 6-6 c.
Pipe Hangers Nominal Diameter C L R 1 0.563 1.5 0.5 2.0 0.563 0.07 25. 1.3 3.1 12.7 50. 1.3 2.0 1 1/ 0.563 1.5 0.5 3.0 0.6 0.07 31. 1.3 3.1 12.7 76.2 17.5 2.0 1 1/2 0.563 1.5 0.5 3.0 0.13 0.07 3.1 1.3 3.1 12.7 76.2 20.6 2.0 2 0.563 1.5 0.5.0 1.062 0.07 50. 1.3 3.1 12.7 101.6 27.0 2.0 2 1/2 0.563 1.5 0.5 5.0 1.313 0.07 63.5 1.3 3.1 12.7 127.0 33.3 2.0 3 0.563 3.0 0.5 6.0 1.563 0.07 76.2 1.3 76.2 12.7 152. 3.0 2.0 0.563 3.0 0.5 7.0 2.125 0.07 101.6 1.3 76.2 12.7 177. 5.0 2.0 6 0.563 3.0 0.5 9.0 3.125 0.07 152. 1.3 76.2 12.7 22.6 79. 2.0 C 0.563 3.0 0.5 11.0.125 0.125 203.2 1.3 76.2 12.7 279. 10. 3.2 10 0.563 3.0 0.5 13.0 5.1 0.125 25.0 1.3 76.2 12.7 330.2 131. 3.2 12 0.563 3.0 0.5 15.0 6.1 0.125 30. 1.3 76.2 12.7 31.0 157.2 3.2 1 0.6 3.0 0.6 17.0 7.1 0.125 355.6 17.5 76.2 15.9 31. 12.6 3.2 16 0.6 3.0 0.6 19.0.1 0.125 06. 17.5 76.2 15.9 2.6 20.0 3.2 1 0.6 3.0 0.6 21.0 9.1 0.1 L 57.2 17.5 76.2 15.9 533. 233.. 20 0.6 3.0 0.6 23.0 10.1 0.1 R 50.0 17.5 76.2 15.9 5.2 25.. 2 0.6.0 0.6 27.0 12.3 0.1 609.6 17.5 101.6 15.9 65. 311.2. 30 0.6.0 0.6 3.0 15.3 0.1 762.0 17.5 101.6 15.9 63.6 37.. 36 0.6.0 0.6 0.0 1.3 0.250 91. 17.5 101.6 15.9 1016.0 63.6 6. General Note: a. Material: Stainless Steel30L. b. Hardware not included. arwick c. 6-7