PROJECT MODEL(S) TYPE DURATAPE TM HO High Output RGB+W Tapelight High output indoor RGB and RGB+W LED Tapelight strip emits sharp, color changing effects in indoor niche, cove and architectural decorative applications. Static Indoor Key eatures lexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm + 3000 K White LEDs, RGB colors can be used together with White LED to create different tone of White or soften the RGB color pallet Ideal for IP20 interior or IP65 (with optional sleeve) location applications such as cove, under-counter/cabinet, and lighting accents Sold per foot and manufactured to specified lengths with factory attached end preps All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability All Duratape features double sided solder points for maximum conductivity and durability Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 16 per 5/16 runo.c. DMX 512 interface available (see pg. 6) Dimensional Drawings 0.66" O.C. 0.48" Duralamp - Durastrip RGB Indoor 0.56" RGB+W RGB Details Spacing LEDs 0.66 OC LED Spacing 18 LEDs per foot End Preps actory preped end preps available (See Page 2) ield Cuts Mounting Installation See page 2 for cut zones Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface Optional aluminum channels with base and cover can 9/16 be used to install decorative, protective covers IP20 Indoor 0.09" IP65 Damp 0.17" Power Supply Listing Compliance Warranty Listed Class II 24 VDC power supply required culus / CE listed ROHS compliant 3 year warranty 3/16 LED Data Wattage Viewing Angle Lifespan at 90% drive 0.24W per LED 120 40,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. ixture Data Model Efficacy Lm/Wt Lm/t Wt/t Wt/LED 8 RGB 37.27 164 4.4 0.24 RGB+W 46.60 205 4.4 0.24 pe ion Static PVC sleeve Indoor. With option PVC sleeve Ordering Guide MODEL Duratape INTENSITY HO = High Output WATTAGE IP RATING LED COLOR 44 = 4.4 W/ft I = Indoor IP20 D=Damp IP65 Sleeve RGB = Red: 625nm Green: 520nm Blue: 450nm RGBW = Red: 625nm Green: 520nm Blue: 450nm 3000 K White VOLTAGE DL HO 44 24 24 = 24 VDC SEE PAGE 5 OR POWER SUPPLIES & DMX CONTROLS Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 1 of 7
DURATAPE TM HO INDOOR RGB+W Wiring Options Duralamp - Durastrip RGB Indoor DL-HT-TAPE 1/2 wide thermally conductive mounting tape. actory attached and sold per foot. DL-HS-TAPE 2 wide aluminum foil tape, used to create a flexible thermal sink. Sold in 100 rolls. A B C D E A 07UI3CBL1 (3-circuit RGB) 07UI4CBL1 (4-circuit RGBW) Single lead wire prep. 24 Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. amp - Duratape Static Indoor B 07UI3CBL2 (3-circuit RGB) 5/16 07UI4CBL2 (4-circuit RGBW) Double O.C. ended lead wire prep. 24 lead wire at both ends. One end can be used for power H connectivity while the other end can Hbe used for a jumper cable to run to an additional length of Duratape. Caution: HPay attention to max run lengths and voltage drops from total lead/jumper wire C 07UI3JMPCBL-XX (3-circuit RGB) 07UI4JMPCBL-XX (4-circuit RGBW) Jumper cable (specified length) Jumper 5/16 O.C. cables can be factory attached to Duratape to meet your specified installation requirements. Jumper lengths available as 1, 2, 3, 4, 6, 12. Add length number to end of part number. Caution: Pay attention 5/16 5/16 to max run lengths and voltage drops O.C. O.C. from total lead/jumper wire G 07UI3ADDCBL (3-circuit RGB) D 07UI4ADDCBL (4-circuit GRGBW) 12 Additional lead wire G Purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. IP20 Indoor Duralamp - Duratape Static Indoor H 0.09" G E 07UI3ADDCON (3-circuit RGB) 07UI4ADDCON (4-circuit RGBW) Additional connectors. Lead wire connectors 2/ea per connection. 07UI3LICON (3-circuit RGB) 07UI4LICON (4-circuit RGBW) Removable/lockable interconnect lead wire. 24 lead wire with locking and unlocking lead connector. H IP65 Damp 9/16 3/16 0.17" G ield Cut Details Duratape can be field cut to accomodate most installations, by cutting at the indicated field cut sections. Caution! ield cutting should only be done before connection power. 8 Duratape features solder points for maximum continuity for long lifespan. 4 (RGB) 8 (RGB+W) ralamp - Duratape Static Indoor. With Duralamp option PVC - Duratape sleeve Static Indoor. With option PVC sleeve Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 2 of 7
Mounting Accessories DL-HOEC-20 Silicone end cap for termination of indoor IP20 tape. DL-HOEC-65 Silicone end cap for termination of outdoor IP65 tape. DL-SLEEVE-CLP-65 Sleeve mounting clips. Package of 10 each for 5 ft section. DL-ALUM-U-6 Low profile aluminum U-Channel for linear run lengths, available in 6 1/2 ID, 5/8 OD, 1/4 H DL-ALUM-L-6 Low profile aluminum 1/2 x 1/2 L-Channel for linear run Duratape can be mounted at either 0º or 90º mounting positions. Available in 6 DL-3-LIC (3-circuit RGB) DL-4-LIC (4-circuit RGBWW) Duratape lockable interconnect. Can be unlocked for easy replacement or maintenance. DL-3-LIC-90 (3-circuit RGB) DL-4-LIC-90 (4-circuit RGB) Duratape 90º lockable interconnect. Can be unlocked for easy replacement or maintenance. DL-3/4-OLD-I-1 Wire fold 1 18ga wire factory attached between specified lengths of segments (4 intervals). or curved applications that require lateral bends for upward illumination. DL-3/4-OLD-I-X Specified lengths of 18ga wire fold. DL-3/4-LIC-OLD-1 Duratape lockable interconnect with flexible 1 18ga wire fold. DL-3/4-LIC-OLD-X Duratape lockable interconnect with flexible (specified lengths) 18ga wire fold. DL-I-45-MCH-4 45 mounting base, sold in 4 foot Used with Duratape (no PVC sleeve) for 45 mounted linear applications. DL-I-45-CVR-4-C (Clear) DL-I-45-CVR-4-/10/30/60 (rosted) 45 mounting base cover, sold in 4 foot 0.69 DL-I-2PC-C (Clear) DL-I-2PC-10/30/60 (rosted) Two-piece mounting tube; base (clear) with cover, sold in 4 foot Used with Duratape (no PVC sleeve) for linear applications. Clear or frosted at 3 diffusion levels, 10%, 30% or 60%. 0.66 0.20 0.375 DL-I-MCHAN-4 Mounting channel, sold in 4 foot Can be used with Duratape (no PVC sleeve) and outdoor Duratape (with PVC sleeve) for linear applications. 0.20 0.66 PRAPLEX-4 lexible tubing, sold in 4 foot Can be used with Duratape (no PVC sleeve) for vertically curved applications. 0.53 0.70 0.63 0.62 Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 3 of 7
Profiles 1.38 3.75 PRDE Aluminum channel with dual opal lens for dual tape 6 runs illuminating in opposite directions. PRDE-ECK Set of two end caps. PRDSAP Aluminum channel with curved opal lens for dual tape 6 runs for unique lighting effects. PRDSAP-ECK Set of two end caps. PRDSAN Aluminum channel with curved opal lens for 45º angled dual tape 6 run illumination. PRDSAN-ECK Set of two end caps. Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 4 of 7
Profiles 0.63 0.47 0.75 0.76 0.63 0.63 1.00 PRAP20 Surface mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover. Suitable for IP65 and IP66 installation applications. Available in 6 DL-AL-CHAN-20-LENS rosted lens, available in 6 DL-AL-CHAN-20-EC-1 End cap with hole for DL-AL-CHAN-20-EC-2 End cap with no hole for run DL-AL-CH-WOC-I Mounting clip for indoor aluminum channel. PRIN20 lush mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 6 DL-AL-CHAN-20-LENS rosted lens, available in 6 DL-AL-CHAN-20-EC-1 End cap with hole for DL-AL-CHAN-20-EC-2 End cap with no hole for run DL-AL-CH-WOC-I Mounting clip for indoor aluminum channel. PRAN20 45º aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 6 DL-AL-CHAN-20-LENS rosted lens, available in 6 DL-AL-CHAN-20-45EC-1 45º end cap with hole for DL-AL-CHAN-20-45EC-2 45º end cap with no hole for run DL-AL-CH-45-C-I Mounting clip for indoor aluminum channel. PRINTC Recessed aluminum channel for walk-over inground applications, includes frosted polycarbonate cover. Suitable for IP65 and IP66 installation applications. Available in 6 DL-AL-CHAN-WOEC-1 End cap with hole for DL-AL-CHAN-WOEC-2 End cap with no hole for run DL-AL-CH-WOC Mounting clip for indoor aluminum channel. 0.60 1.00 2.52 PRINCG Aluminum profilefor installation flush in plasterboard. Complete with white lens. Available in 6 Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 5 of 7
Power Supplies Cat No Type Voltage Wattage Listing Dimensions DEL-I-120-1-4-24-D Electronic 90-305V AC / 24V DC 96W / 1X4A** culus 10 W X 10 L 4 D* DEL-I-240-2-4-24-D 90-305V AC / 24V DC 192W / 2X4A** culus 10 W X 10 L 4 D* DEL-I-320-3-4-24-D 90-305V AC / 24V DC 288W / 3x4A** culus 10 W X 10 L 4 D* DEL-120-1-4-24-D 90-305V AC / 24V DC 96W / 1X4A** UL/CE 2.67 W X 9.66 L 1.53 D DMG-40-1-1.6-24-D Magnetic 120V AC / 24V DC 40W / 1X1.6A** cetlus W X 5.06 L 2.14 D DMG-60-1-2.4-24-D 120V AC / 24V DC 60W / 1X2.4A** cetlus 2.25 W X 6.55 L 2.55 D DMG-120-1-4-24-D 120V AC / 24V DC 96W / 1X4A** cetlus 3.00 W X 9.80 L 3.00 D DMG-192-2-4-24-D 120V AC / 24V DC 192W / 2X4A** cetlus 3.00 W X 9.80 L 3.00 D * Dimensions include enclosure with mounting bracket ** 4A maximum current protection for each seconday circuit *** Constant voltage drivers 50HZ, voltage regulated with short circuit protection. operating temperature -40 C- 80 C DURATAPE TM HO Electronic Driver Electronic Driver in Enclosure Magnetic Transformer Electronic Driver Power Supply Magnetic Power Transformer Supply Line Voltage Input Line Voltage Input UL listed J-box by others Wiring from transformer to J-box must be to Class II standard. Refer to NEC and local code requirements. UL listed J-box by others Wiring from transformer to J-box must be to Class II standard. Refer to NEC and local code requirements. Duratape Duratape Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 6 of 7
RGB Controllers Cat No Application Voltage Type Listing Dimensions ZKC-DMX Indoor 12-24V DC RGB DMX Controller culus 2.25 W X 6.25 L X 1.75 D ZKTPC-RGBW Indoor 5V DC RGB+W DMX Controller culus 4.20 W X 5.75 H X 0.40 D ZKC-DMXW Indoor 24V DC RGW+W DMX Interface culus 6.60 L X W X 0.87 D ZKC-DMX Dimming Module ZKTPC-RGBW RGB+W DMX Controller System Layout Example Diagram ZXC-DMXW Controller 1 Controller 2 Controller 1 Positive Negative Standard Dimmable Power Supplies DEL-I-120-1-4-24 DEL-I-240-2-4-24 DEL-I-320-3-4-24 V+ V- N L Hot Neutral Ground Copyright 2016 Duralamp USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 4.27.16 - Page 7 of 7