SECTIONAL DIRECTIONAL VALVE HDS 20 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.84

Similar documents
SECTIONAL DIRECTIONAL VALVE HDS 30 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.106

MONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves

MONOBLOCK DIRECTIONAL CONTROL VALVES

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14

Monobloc and Sectional Directional Control Valves

Directional Control Valve CV550

Available manual, pneumatic, and hydraulic spool control kits.

Auxiliary valves. Lever. Spool positioner Check valve Spool

NV452 Monoblock directional control valve

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA

HYDRAULIC CONTROL VALVES

Sectional Directional Control Valve RSQ 240

Sectional Directional Control Valve RS 220

Contents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves

V250 SERIES DIRECTIONAL CONTROL VALVES

SECTION A FRONT END LOADER VALVES

Monobloc and Sectional Directional Control Valves

Contents. Directional Control Valve 2 Series CV 300

3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.

Proportional Solenoids

Valves and Solenoid valves Series E 2/

Section 1-7. Nominal Flow 50 lpm 13 US gpm. Threads G3/8 (Standard) SAE8

Post-Compensated Proportional Valve CV2000LS

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

MONOBLOCK VALVES CATALOGUE

Valves and Solenoid valves Series 7

Monobloc and Sectional Directional Control Valves

SOLENOID VALVES AND PNEUMATIC VALVES

Directional Control Valve HDS21

Knob handles IP

SV SOLENOID OPERATED

5/2 and 5/3 Way Valves

DIRECTIONAL CONTROL VALVES CETOP3

NG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.

CLS180 Proportional Load Sensing Mobile Valve

5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm

Monoblock Directional Control Valve RM 230

Directional Control Valve HDS34

DIRECTIONAL CONTROL VALVES CETOP3

Proportional Directional Valve System

p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min

ORV-M45. Contents. Additional Informations

Hydraulics CONTROL VALVES

Monobloc and Sectional Directional Control Valves

Introduction. Pressure drops

Publ. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V

DSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min

Contents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.

Pneumatic Valve 4V100 Series

Proportional Pressure Reducing Valve PDM08130

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

Directional Control Valve

General Specifications DRV DRV-Exm DRV-Exd

Hydraulic Units UP40. Reference: 200-P EN-00 1/44. Issue:

Directional Control Valve. Formerly the RSM290 Series. Technical data. Pressures / Flows Max. operating pressure set per port:

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

600, 630. Diaphragm Valve, Plastic

Flow sharing control block in mono block / sandwich plate design M6-22

COILS, CONNECTORS, SOLENOID VALVES

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

CTR* /117 ED HYDRAULIC POWER UNITS. TANK CAPACITY from 8 lt to 150 lt. PUMP FLOW RATE from 1,6 lt to 41 lt HYDRAULIC SYMBOL

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES

NG06. General Size NG6 NG10 Design

V050 SERIES DIRECTIONAL CONTROL VALVE

COILS AND CONNECTORS. Atlantic Fluid Tech SECTION 21. Rev. 10/ Connector Page class

ELECTRIC COMPONENTS HYDRAULIC COMPONENTS

Proportional Pressure Relief Valve Series RE*T

Pilot Operated Proportional DC Valve Series D*1FW / D*1FT

SDS400. Sectional directional control valve

Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

Circuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control

Globe Valve, Metal. Sectional drawing

Chapter 10: Valves for Pipe Mounting

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic

TPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7

Electro-Pneumatic Linear Positioner Installation and Operation Instructions B GB

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

Flow sharing control block in mono block / sandwich plate design M6-15

Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports


400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS

Table of Contents. Proportional & Precision Regulator Instrumentation

BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

Monoblock Directional Control Valve HDM11S/3PQ

Diaphragm Valve, Plastic

Distributed By: M&M Control Service, Inc PRODUCT PRODUCT CODE TECHNICAL INSTRUCTIONS PAGE #

DSE3B /118 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL

TECHNICAL CHARACTERISTICS

p max 350 bar Q max 50 l/min bar bar 50 Ports dimensions: P - port (pressure) T - port (drainage) T - port (drainage) A/B - port l/min

Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company

Control Valves Positioner

Control Valves Positioner

Transcription:

CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.84

Material specification: Standard features: Optional features available: Symbols: P T A/B H.P.C.O. RV P 1 T 1 Weight CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.85

T 1 H.P.C.O. A T P P 1 B RV B B A A 1 2 3 4 5 6 7 8 9 10 A B CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.86

Parallel circuit CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.87

Series circuit Transient hydraulic characteristics Relief Valve RV CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.88

Adjustable direct acting Relief Valve RV P 06 15 RV 26 Right inlet manifold (standard) with P and RV for parallel circuit T01 P T02 T04 standard: 3/4 BSP Left inlet manifold with P and RV (standard on series circuit) P P E T T09 T10 T12 standard: 3/4 BSP T Carry over Plug 3/8 DIN 906 H.P.C.O. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.89

Left outlet cover with T for parallel circuit (Standard) P01 T P02 P04 Standard 3/4 BSP Left outlet cover with T and carry over H.P.C.O. H.P.C.O. P05 T P06 P08 Standard 3/4 BSP Right outlet cover with T (standard on series circuit) P09 T P10 P12 Standard 3/4 BSP Right outlet cover with T and carry over H.P.C.O. H.P.C.O. P13 T P14 Standard 3/4 BSP P16 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.90

Standard circuit: parallel K01 K02 K05 K06 K04 K08 Optional circuit: series and tandem K46 K50 K47 K51 K49 K53 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.91

S Ss* A AS* X B Xc C Cs* Z D G Gs* L R** LsA ** LsC ** LsG ** LsS ** Standard parallel circuit Optional tandem circuit Optional series circuit Combined parallel/series circuit CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.92

Type 01 02 03 05 06 07 09 11 19 24 31 46 47 50 56 83 128 Spool position Stroke 3 1 0 2 mm Code Force (F) for spool movement 01 56 01 02 03 05 06 07 09 11 19 56 Microswitch control 128 83 31 46 47 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.93

L55 L100 AL001 L300 AL002 AL003 AL004 Safety levers L47 L46 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.94

Remote cable control Lever Support AL001 AL002 AL003 AL004 Cable Spool Kit L142 L133 Cross joystick for dual axis control L134 AL010 T A B A B P CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.95

06 15 26 Port relief valve OA Anticavitation valve C Combined port relief and anticavitation valve UC CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.96

Pneumatic control ON OFF P 24 Pneumatic proportional control PP 151 Electro pneumatic control ON OFF EP 77 EP 78 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.97

Hydraulic control ON OFF H 24 Hydraulic proportional control HP 50 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.98

Electro hydraulic control internal pilot vesion ON OFF with pressure reducing valve EHI 263 Mechanical and hydraulic features CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.99

Electro hydraulic control external pilot version ON OFF EHE 300 EHE 304 EHE 305 Electro hydraulic control external pilot version ON OFF with pressure reducing valve on inlet manifold EHE 302 Mechanical and hydraulic features CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.100

F (VDE 0580) IP65 (DIN 40050) ED 100% 70 C 10% Voltage Nominal voltage Power (Watt) Resistance (Ohm) Current (Ampere) Ambient temp. Stabilized temp. Ambient temp. Stabilized temp. D.C. A.C. 200.5441.10009 200.5441.10012 Pg 9 6 8 mm 1N 4007 GP VDR DIN 43650 2 + max. 220 V 10 Ampere 16 Ampere 4 mohm 1.5 mm 2 Glass fibre reinforced nylon IP65 (DIN 40050) C (VDE 0110) 40 +90 C CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.101

Closed loop electro hydraulic proportional analog control EHP 160 EHP 161 EHP 162 Mechanical and hydraulic features Electric features Joystick control characteristics Electrical wiring CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.102

EHP Hydraulic circuit 160 161 162 Section with relief valve K81 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.103

Section with intermediate inlet and outlet pump (with independent flows) K82 Section with outlet pump K83 Section with intermediate inlet and outlet pump (with combined flows) K84 CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.104

HOW TO ORDER HDS20 / 3 - T04-140 - P08 1 K08 A 03 L100 - UC 150 150 * Valve Series Number of Spools Inlet Cover Code Relief Valve Setting (Bar) Outlet Cover Code Position of the Section Type of Sectional Body - Code Spool Code Port B Setting Port A Setting Service Port Valve Code (Option) (Omit for No Service Port Valve) Hand Lever Style Spool Positioner Code *Repeat Coding from Position of Section for Subsequent Valve Sections CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.105