bott vario In-Vehicle Equipment

bott vario In- Equipment 2016 Full range of products and accessories

2016 Table of Contents 2 www.bott.ie

bott Table of contents bott vario, the in-vehicle equipment system Floors and linings 30-49 Containers for flatbed vehicles- botttainer 50-58 Load restraint blanket for flatbed vehicles 59 VarioCar - boot floor inserts for estate cars 60-61 bott vario Modules 62-87 Under-floor modules 88-99 Heavy duty sliding platforms 100 variopin locking system for selected cabinets 101 Drawer dividers 102-119 Mobile working and transport of long items 120-126 Gas cylinder transport / Ventilation 127-130 Window grilles 131-132 Load restraint (lashing straps, anti-slip mats, clamping bars) 133-164 Roof Rack Systems 165-186 Accessories 187-194 Light and Energy 195-207 Case systems and boxes for cubio and bott vario bottbox - the new standard 208-217 Euroboxes, aluminium transport cases 218-219 Service cases and plastic storage boxes 220-244 Service cases, aluminium and steel 245-255 3

Hiermit wird bescheinigt, dass das Qualitätsmanagementsystem der durch Intertek Certification GmbH auditiert und zertifiziert wurde in Bezug auf die Anforderungen der Geltungsbereich des Qualitätsmanagementsystems Entwicklung, Fertigung und Vertrieb von Betriebseinrichtungen, Fahrzeugeinrichtungen und Montagearbeitsplätzen Zertifikat-Reg.-Nr.: 2015-01186 Gültigkeitszeitraum: 07.06.2015 bis 06.06.2018 Erst-Zertifizierung am: 28.07.1995 Ausstellungsdatum: 27.05.2015 Christina Weiglein, Zertifizierungsstelle Intertek Certification GmbH - Hanns-Martin-Schleyer-Straße 2, D-41199 Moenchengladbach, Deutschland In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate s validity is subject to the organization maintaining their system in accordance with Intertek s requirements for systems certification. Validity may be confirmed via email at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request. Hiermit wird bescheinigt, dass das Umweltmanagementsystem der durch Intertek Certification GmbH auditiert und zertifiziert wurde in Bezug auf die Anforderungen der Geltungsbereich des Umweltmanagementsystems Entwicklung, Fertigung und Vertrieb von Betriebseinrichtungen, Fahrzeugeinrichtungen und Montagearbeitsplätzen Zertifikat-Reg.-Nr.: 2015-12042 Gültigkeitszeitraum: 07.06.2015 bis 06.06.2018 Erst-Zertifizierung am: 07.06.2012 Ausstellungsdatum: 27.05.2015 Christina Weiglein, Zertifizierungsstelle Intertek Certification GmbH - Hanns-Martin-Schleyer-Straße 2, D-41199 Moenchengladbach, Deutschland In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate s validity is subject to the organization maintaining their system in accordance with Intertek s requirements for systems certification. Validity may be confirmed via email at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request. High stability, sturdiness and durability: These are the main principles of bott. They provide the fundamental foundation for making your investment worthwhile. Furthermore, bott ensures its production and logistics process with internal and external guidelines and inspections. Our quality principles Certified according to DIN EN ISO 9001:2008 Certified environmental management according to ISO 14001:2009 Products have GS mark for TÜV-tested safety (German safety standard) Certified Quality Bott is a certified body builder for a few major commercial vehicle manufacturers. Therefore, bott must consistently demonstrate very high standards of service and guarantee the best quality of its products. Zertifikat Zertifikat Bott GmbH & Co. KG Bahnstraße 17, D-74405 Gaildorf Bott GmbH & Co. KG Bahnstraße 17, D-74405 Gaildorf DIN EN ISO 9001:2008 DIN EN ISO 14001:2009 4 www.bott.ie

Der Status EDITION-Partner steht für eine exklusive Zusammenarbeit im Einrechnungsgeschäft mit der PEUGEOT Deutschland GmbH. Der EDITION-Partner erfüllt die hohen Anforderungen der PEUGEOT Deutschland GmbH in Bezug auf Qualität, Sicherheit, Service und Marketing. Die Einhaltung der Standards wurde vor Ort geprüft. Köln, 19.09.2014 Carsten Schopf Direktion Vertrieb Businesskunden Peugeot Deutschland GmbH Alexander Kaiser Direktion Nutzfahrzeuge Umbauten und Sonderlösungen Peugeot Deutschland GmbH bott Quality and standards Values bott places great importance on the quality and durability of its products. Their robust design will pay for itself over the years. Steel components are powder-coated. These surfaces can withstand the heaviest loads, notes Thomas Rother from the protoype development Department. bott employs the most modern production process methods. Their installation methods follow the best technological stateof-the-art trends. This ensures the highest possible quality of the production process that we employ here, in Gaildorf. Being able to contribute to our customers' satisfaction every single day makes me really happy, Joachim White Berger, employee in the sheet metal centre. Experience ZERTIFIKAT Der Aufbauhersteller Bott GmbH & Co. KG ist EDITION-Partner der PEUGEOT Deutschland GmbH bott offers me security and good prospects for my future. The high demands of the company in regards to quality and durability of the products are also reflected in the favourable working climate. Many of my colleagues have already been working here for a very long time, Patrick Rosenberger, Team Leader, Incoming Goods Department 5

bott facilities and daughter companies Export partners bott. working efficiently. 6 www.bott.ie

bott An introduction bott international Personal consulting Customers worldwide recognise bott as a leading manufacturer of in-vehicle equipment, workstation storage solutions along with workshop equipment and use our innovative product ranges in all areas. Although bott products are highly diverse, they all share the system concept and professional application on the part of their users. With production facilities in Germany, the UK and Hungary, as well as other sales and distributions organisations in France, Austria, Denmark and Italy, bott can boast an extensive service network. With the help of license partners and importers who are located in various countries around the world, bott can cater to individual local needs of its clients - from planning to installation. At the bott group s German headquarters, the latest information is gathered from every market to enable the evolution of new and innovative strategies. Therefore, efficient work and customer safety is always a high priority. 7

bott vario The in-vehicle equipment individual planning and configuration optimal space organisation low weight crash tested 8 www.bott.ie

bott vario The in-vehicle equipment Conditioned for your success.. bott vario Order and cleanliness as optimal conditions for efficient work are essential for vehicle operation and service. bott vario in-vehicle equipment creates ideal conditions for mobile use to tackle all challenges and guarantee long-term success. bott vario in-vehicle equipment uses optimal loading space. It organises tools, machines and supplies in a systematic and clear manner. This saves time for the essential tasks and challenges that any service employee faces daily during their workday. The mix of materials made of steel, aluminium and plastic provide for a balanced harmony of lightweight, stability and durability. Moreover, numerous load-restraint elements provide great means for road safety. With bott vario in-vehicle equipment, any cargo can be lashed quickly, easily and securely. 9

bott vario Range of services Analysis, design and individual planning Installed and delivered at your local service partner Custom solutions available Fast, dependable delivery times Tested safety Availability guarantee ISO-certified 9001:2008 14001:2009 International availability Crash tests in accordance with ECE R44 AFTER SALES Service Support before, during and after installation Year warranty* *bott grants the ultimate purchaser (end user), in addition to the statutory warranty, a 3-year product warranty in accordance with bott warranty conditions. bott guarantees for a period of 3 years from date of delivery that the supplied products are free from defects in terms of materials and workmanship. Warranty does not cover electronic components and modules. 10 www.bott.ie

bott vario Colour scheme for in-vehicle equipment Environmentally friendly, durable powder coating of steel parts Scratch-resistant surfaces thanks to anodised aluminium High-quality anodised aluminium surfaces and powder coated steel components with a finely textured finish characterise the distinctive design of bott vario in-vehicle equipment. Its neutral design makes it suitable for any vehicle colour. Accessories such as bottboxes, the practical variosort service case or the robust variosafe carry box can be easily integrated and perfectly blend into the overall visual appearance. bott vario Colour combination:.19 anodised aluminium anthracite grey RAL colour: 7016 Colours shown may not match the original colours due to printing-related reasons. 11

Endframe Sturdy construction made of highstrength steel Connecting link between the load and the vehicle Puncture-proof Optionally available with lashing rails Drawers Anodised aluminium surface Quick, organised access from above with convenient handling Ergonomically shaped, smooth-operating handle: easy to open, even with gloves Secure two-sided locking system with steel locking pins, with optional variopin Drawer slides with detente: stops open drawers from closing on a slope Ball-bearing full extension slide, load capacity up to 40 kg for standard duty or 70 kg for heavy duty 12 www.bott.ie

bott vario The in-vehicle equipment bott vario Trays bottboxes sliding shelves Anodised aluminium surface High load capacity Intelligent roll-formed and folded reinforcements Transparent viewing window Boxes secured in transport Box slides prevent boxes from falling out Easy box removal Boxes as either storage, bulk or grab boxes Optional transparent dividers and lids Highly convenient for carrying Smooth inner walls Label strip 13

Aluminium base unit drop front Anodised aluminium surface For the safe storage of cargo in the base compartment Drop-front height less than base compartment height: Allows full view of cargo when closed Strong enough for standing on Can be closed with the toe cap of the shoe vertical lashing rails In-vehicle equipment provides for integrated load-restraint solutions Easy to handle Suitable for all bott lashing straps with fitting Edge protection Protects loaded goods Protects occupants Soft PVC with cover cap Drop front storage pocket To make good use of the space in the wheel arch area Provides a safe means of transporting small to medium-sized goods With gas struts for comfortable operation 14 www.bott.ie

bott vario The in-vehicle equipment variocase service case Anodised aluminium surface Low weight Corner guards for smooth surfaces Ergonomic handle variosort Comfortable one-handed operation thanks to a patented locking mechanism Transparent lid Can be securely connected together with variosafe bott vario variosafe varioslide Clamping unit Carry box with lockable lid Interior compartments created using small parts storage boxes, dividers and die-cut foam inserts Integral latching mechanism allows several cases to be stacked and simultaneously secured together Smooth inner walls Drawer stop integrated in varioslide guides Easy removal Convenient, safe clamping of different case sizes For mounting between the endframes Clamping with cam lever Load can be clamped to left or right 15

Storage depot for small parts Adjustable guides Organised storage Items slide independently variocart Retractable/removable Open structure: improved ventilation Roll depot For holding cable, hose and belt rolls Adjustable roll width Convenient loading and unloading by opening the drop-front Winding when drop front closed perfo accessories perfo perforation on the side walls, endframes and perfo panels for attaching perfo hook kits and indispensable accessories from the bott perfo product range 16 www.bott.ie

bott vario The in-vehicle equipment Drop-front shelves Anodised aluminium surface protection - low weight Different drop-front heights are available Storage of tools and containers with convenient front access Reinforcing profile on the under side for high stability 180º opening angle: freedom of movement, convenient loading with no lip Eurobox shelf Integration and use of industry-standard containers Positioning aid for each box: Slip protection Includes Euroboxes in different dimensions bott vario Long-item top tray Anodised aluminium surface Low weight Rear access gained via latched drop-front Convenient to load and unload without entering the vehicle For storing long items Long-item holder Quick access High level of protection Secure transport 3 sizes 17

Lashing rail Gas cylinder restraint system Roller shutter system In-vehicle equipment provides for integrated load-restraint solutions Easy to handle Suitable for all bott lashing straps with fitting Crash-tested design Offers good adjustment options Ratchet strap For privacy and theft prevention For integration in shelving bays and base compartments Aluminium guide rails and handle for a highly sturdy construction Hinged door cupboard Lockable Inside of door with perfo perforations for attaching perfo tool holders Automatic locking mechanism when door closed Optionally available with variopin Sump shelf with drip tray For transporting containers with liquids Protects against leaking fluids and contamination thanks to the seam-welded shelf and drip tray Includes cargo restraint track and lashing strap for securing the load 18 www.bott.ie

bott vario The in-vehicle equipment Folding worktop Worktop made of beech multiplex Folding, thereby low centre of gravity Finger protection Optional support leg Retractable worktop Worktop made of beech multiplex Ergonomic clamping handle Optional support leg bott vario Heavy duty sliding platform Provides optimal access to and ergonomic loading and unloading of heavy items Locks automatically into position when fully extended or fully closed Integrated lashing points Wide handle Horizontal refrigerant shelf Secure transport of refrigerant bottles Can be easily accessed from the outside 19

bott vario 3D planning analysis design planning production installation support 20 www.bott.ie

bott vario Design, planning and realisation With its unique modularity, bott vario offers the perfect basis for in-vehicle equipment adapted exactly to your demands. bott personally designs the right solution for you Following detailed needs assessments, 3D drawings are used to create illustrative offers. bott already pinpoints initial ideas at the beginning of the consultation phase on the basis of demonstration vehicles. bott vario Together with bott planning specialists, you will decide where the equipment gets installed inside the vehicle. bott analyses the desired vehicle equipment and organises work space in the vehicle in an optimal manner. Only trained personnel can install bott vario in-vehicle equipment. Your safety is bott's top priority. 21

22 www.bott.ie

bott vario The in-vehicle equipment Proven security. bott engineers regularly conduct crash tests and demonstrate how safe the bott vario in-vehicle equipment is for the vehicle passengers. Independent experts carry out tests with fully loaded vehicles in such a way that loads on the components are distributed in the same manner as during a road accident. Such crash tests simulate an impact of a vehicle with an obstacle at a speed of 50 km/h - pursuant to ECE directive R44. In particular, testers go over the following questions: bott vario Does bott vario absorb the dynamic energy? Does the cargo stay where it belongs? Are the extreme forces successfully dissipated? bott vario in-vehicle equipment always meets the highest requirements of the tests. Results of the tests demonstrate that the driver and the front passenger can rely on bott vario in case of emergency. 23

bott vario In practice 24 www.bott.ie

bott vario Reference examples bott vario 25

bott vario In practice 26 www.bott.ie

bott vario Reference examples bott vario 27

bott vario In practice 28 www.bott.ie

bott vario Reference examples bott vario 29

bott vario Floors and linings sturdy body protection versatile attachments for load-restraint equipment easy-to-clean loading space 30 www.bott.ie

bott vario Floors and linings Side lining panels Precisely matching contours Minimal weight with high impact strength Optionally available as high-strength plastic, wood or perforated aluminium sheet Easy-to-clean surfaces bott vario Floor Sturdy materials Non-slip surfaces Edge protection near door openings Built-in lashing rails Access to factory-installed lashing points Cut-outs for ventilation Roof liners Easy-to-clean surface Can be fitted with lights For a holistic appealing look inside the vehicle 31

bott vario Roof liners Express delivery available vario protect-light roof liners Contoured roof-lining panels made from recyclable polypropylene (vario protect-light) Twin-wall sheets, 4 mm thick with a one-sided coarse texture Colour: light grey (RAL 7035) UV-stable, low weight, corrosion resistant, non-decomposable, chemical resistant Easy to clean Fixings included type Build year from Wheelbase packed Citroen Berlingo / Peugeot Partner 2008 2728 122 31 024.95 Fiat Doblò / Opel Combo Maxi L2/H1 2010 3105 122 31 012.95 Ford Transit Custom L1/H1 2012 2933 122 31 018.95 Ford Transit Custom L2/H1 2012 3300 122 31 019.95 Ford Transit L2/H2 2014 3300 122 31 025.95 Ford Transit L3/H2 2014 3750 122 31 026.95 Mercedes-Benz Citan 2012 2697 122 31 014.95 Mercedes-Benz Vito Compact 2014 3200 122 31 022.95 Mercedes-Benz Vito Long 2014 3430 122 31 023.95 Mercedes-Benz Vito Extra long 2014 3430 122 31 027.95 Mercedes-Benz Sprinter / Volkswagen Crafter L1/H1 2006 3250 122 31 013.95 Mercedes-Benz Sprinter / Volkswagen Crafter L1/H2 2006 3250 122 31 008.95 Mercedes-Benz Sprinter / Volkswagen Crafter L2/H1 2006 3665 122 31 009.95 Mercedes-Benz Sprinter / Volkswagen Crafter L2/H2 2006 3665 122 31 001.95 Mercedes-Benz Sprinter / Volkswagen Crafter L2/H2 2006 4325 122 31 002.95 Mercedes-Benz Sprinter / Volkswagen Crafter L4/H2 2006 4325* 122 31 007.95 Opel Vivaro L1 / Renault Trafic L1/H1 2014 3098 122 31 020.95 Opel Vivaro / Renault Trafic L2/H1 2014 3498 122 31 021.95 Nissan NV400 / Opel Movano / Renault Master L2/H2 RWD/FWD 2010 3682 122 31 010.95 Nissan NV400 / Opel Movano / Renault Master L3/H2 RWD/FWD 2010 3682/4332 122 31 011.95 Renault Kangoo L1 2012 2697 122 31 014.95 Volkswagen Caddy 2015 2682 122 31 006.95 Volkswagen T6 L1/H1 2015 3000 122 31 004.95 * with overhang Express delivery available 32 www.bott.ie

bott vario Floors and linings bott vario 33

bott vario Floors Express delivery available bott vario floor Light and moisture-repelling 12 mm birch multiplex floor Top side: robust and slip-resistant synthetic resin film coating with bott decoration Underside: synthetic resin film coating with smooth finish Edges: profiled, moisture-resistant grey finish with aluminium edge protection in the door area E1 class pollutant in accordance with EN 717-2 Anti-slip R12, Taber value > 500 Fixings included Much simplified installation with hold-down cups now possible Installation with hold-down cups Citroën Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Nemo 2008 2513 113 20 128 113 10 128 113 12 128 2 Berlingo 2008 2728 113 20 129 113 10 129 113 12 129 3 Berlingo long 2008 2730 113 20 131 113 10 131 113 12 131 3 Jumpy L1H1 2007 3000 113 20 124 113 10 124 113 12 124* 2 Jumpy L2H1 2007 3122 113 20 125 113 10 125 113 12 125* 3 Jumpy L2H2 2007 3122 113 20 125 113 10 125 113 12 387 3 Jumper L1 2006 3000 113 20 120 113 10 120 113 12 120 3 113 21 120 Jumper L2 2006 3450 113 20 121 113 10 121 113 12 121 3 113 21 121 Jumper L3 2006 4035 113 20 122 113 10 122 113 12 122 5 113 21 122 Jumper L4 2006 4035* 113 20 123 113 10 123 113 12 123 6 113 21 123 *with overhang 3 with tread edge protection Dacia Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Dokker Express 2012 2810 113 20 146 113 10 146 113 12 146 3 Logan Van / Express 2009 2905 113 20 132 2 113 10 132 2 2 Mounting without a bracket 3 with tread edge protection Express delivery available 34 www.bott.ie

bott vario Floors bott vario floor Fiat Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Fiorino 2008 2513 113 20 128 113 10 128 113 12 128 2 Scudo L1H1 2007 3000 113 20 124 113 10 124 113 12 124 2 Scudo L2H1 2007 3122 113 20 125 113 10 125 113 12 125 3 Scudo L2H2 2007 3122 113 20 125 113 10 125 113 12 387 3 Doblò L1 2010 2755 113 20 134 113 10 134 113 12 134* 3 Doblò L2 2010 3105 113 20 135 113 10 135 113 12 135* 3 Ducato L1 2006 3000 113 20 120 113 10 120 113 12 120 3 113 21 120 Ducato L2 2006 3450 113 20 121 113 10 121 113 12 121 3 113 21 121 Ducato L4 2006 4035 113 20 122 113 10 122 113 12 122 5 113 21 122 Ducato L5 2006 4035* 113 20 123 113 10 123 113 12 123 6 113 21 123 *with overhang 3 with tread edge protection Ford Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Transit Courier 2014 2489 113 20 159 2 113 10 159 2 113 12 159 2 2 Transit Connect L1 2014 2662 113 20 147 113 10 147 113 12 147 2 Transit Connect L2 2014 3062 113 20 148 113 10 148 113 12 148 3 Transit Custom L1H1 2012 2933 113 20 144 2 113 10 144 2 113 12 144 2 3 113 21 144 Transit Custom L1H2 2012 2933 113 20 144 2 113 10 144 2 113 12 382 2 3 113 21 144 Transit Custom L2H1 2012 3300 113 20 145 2 113 10 145 2 113 12 145 2 4 113 21 145 Transit Custom L2H2 2012 3300 113 20 145 2 113 10 145 2 113 12 383 2 4 113 21 145 Transit FA L2 2014 3300 113 20 149 2 113 10 149 2 113 12 149 2 3 113 21 149 2 Transit HA L2 2014 3300 113 20 150 2 113 10 150 2 113 12 150 2 3 113 21 150 2 Transit FA L3 2014 3750 113 20 151 2 113 10 151 2 113 12 151 2 4 113 21 151 2 Transit HA L3 2014 3750 113 20 152 2 113 10 152 2 113 12 152 2 4 113 21 152 2 Transit HA L4 2014 3750L 113 20 153 2 113 10 153 2 113 12 153 2 5 113 21 153 2 2 Mounting without a bracket 3 with tread edge protection bott vario 35

bott vario Floors Express delivery available bott vario floor Hyundai Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 H350 L2 2015 3435 113 20 166 113 10 166 113 12 166 3 113 21 166 H350 L3 2014 3670 113 20 160 113 10 160 113 12 160 4 113 21 160 3with tread edge protection Iveco Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Iveco Daily L1 2014 3000 113 20 161 113 10 161 113 12 161 2 113 21 161 Iveco Daily L2H1 2014 3520 113 20 162 113 10 162 113 12 388 3 113 21 162 Iveco Daily L2H2 2014 3520 113 20 162 113 10 162 113 12 162 4 113 21 162 Iveco Daily L3 2014 3520L* 113 20 163 113 10 163 113 12 163 4 113 21 163 Iveco Daily L4 2014 4100 113 20 164 113 10 164 113 12 164 5 113 21 164 Iveco Daily L5 2014 4100L* 113 20 165 113 10 165 113 12 165 6 113 21 165 *with overhang 3 with tread edge protection Mercedes-Benz Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Citan Compact 2012 2313 113 20 130 2 113 10 130 2 113 12 130 2 2 Citan Long 2012 2697 113 20 127 2 113 10 127 2 113 12 127 2 3 Citan Extra Long 2012 3081 113 20 136 2 113 10 136 2 113 12 136 2 3 Vito Compact 2014 3200 113 20 156 113 10 156 113 12 156 2 113 21 156 Vito Compact 4 2014 3200 113 20 397 113 10 397 113 12 397 2 113 21 397 Vito Long 2014 3200 113 20 157 113 10 157 113 12 157 3 113 21 157 Vito Long 4 2014 3430 113 20 398 113 10 398 113 12 398 3 113 21 398 Vito Extra Long 2014 3430 113 20 158 113 10 158 113 12 158 3 113 21 158 Vito Extra Long 4 2014 3430 113 20 399 113 10 399 113 12 399 3 113 21 399 Sprinter L1 2006 3250 113 20 114 113 10 114 113 12 114 3 113 21 114 Sprinter L2 2006 3665 113 20 115 113 10 115 113 12 115 5 113 21 115 Sprinter L3 2006 4325 113 20 116 113 10 116 113 12 116 6 113 21 116 Sprinter L4 2006 4325* 113 20 117 113 10 117 113 12 117 7 113 21 117 *with overhang 2 Mounting without a bracket 3 with tread edge protection 4 shortened floor with a lip for plastic fuel cans in the back Express delivery available 36 www.bott.ie

bott vario Floors bott vario floor Nissan Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Primastar L1/H1 2016 3098 113 20 154 2 113 10 154 2 113 12 154 2 3 113 21 154 2 Primastar L2/H1 2016 3498 113 20 155 2 113 10 155 2 113 12 155 2 4 113 21 155 2 NV 200 2009 2725 113 20 142 2 113 10 142 2 113 12 142 2 3 NV 400 FWD-L1 2011 3182 113 20 137 113 10 137 113 12 137 3 113 21 137 NV 400 FWD-L2 2010 3682 113 20 138 113 10 138 113 12 138 3 113 21 138 NV 400 FWD-L3 2010 4332 113 20 139 113 10 139 113 12 139 4 113 21 139 NV 400 RWD-L3 2010 3682 113 20 140 113 10 140 113 12 140 4 113 21 140 NV 400 RWD-L4 2010 4332 113 20 141 113 10 141 113 12 141 5 113 21 141 2 Mounting without a bracket 3 with tread edge protection bott vario 37

bott vario Floors Express delivery available bott vario floor Opel Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Combo L1 2010 2755 113 20 134 113 10 134 113 12 134* 3 Combo L2 2010 3105 113 20 135 113 10 135 113 12 135* 3 Vivaro L1-H1 2014 3098 113 20 154 2 113 10 154 2 113 12 154 2 3 113 21 154 2 Vivaro L2-H1 2014 3498 113 20 155 2 113 10 155 2 113 12 155 2 4 113 21 155 2 Movano FWD-L1 2011 3182 113 20 137 113 10 137 113 12 137 3 113 21 137 Movano FWD-L2 2010 3682 113 20 138 113 10 138 113 12 138 3 113 21 138 Movano FWD-L3 2010 4332 113 20 139 113 10 139 113 12 139 4 113 21 139 Movano RWD-L3 2010 3682 113 20 140 113 10 140 113 12 140 4 113 21 140 Movano RWD-L4 2010 4332 113 20 141 113 10 141 113 12 141 5 113 21 141 2 Mounting without a bracket 3 with tread edge protection Peugeot Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Bipper 2008 2513 113 20 128 113 10 128 113 12 128 2 Partner 2008 2728 113 20 129 113 10 129 113 12 129 2 3 Partner long 2008 2730 113 20 131 113 10 131 113 12 131 3 Expert L1H1 2007 3000 113 20 124 113 10 124 113 12 124 1 2 Expert L2H1 2007 3122 113 20 125 113 10 125 113 12 125 1 3 Expert L2H2 2007 3122 113 20 125 113 10 125 113 12 387 3 Boxer L1 2006 3000 113 20 120 113 10 120 113 12 120 3 113 21 120 Boxer L2 2006 3450 113 20 121 113 10 121 113 12 121 3 113 21 121 Boxer L3 2006 4035 113 20 122 113 10 122 113 12 122 5 113 21 122 Boxer L4 2006 4035* 113 20 123 113 10 123 113 12 123 6 113 21 123 *with overhang 1 H1 only 2 Mounting without a bracket 3 with tread edge protection Express delivery available 38 www.bott.ie

bott vario Floors bott vario floor Renault Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Kangoo Compact 2013 2313 113 20 130 2 113 10 130 2 113 12 130 2 2 Kangoo 2013 2697 113 20 127 2 113 10 127 2 113 12 127 2 3 Kangoo Maxi 2013 3081 113 20 136 2 113 10 136 2 113 12 136 2 3 Trafic L1-H1 2014 3098 113 20 154 2 113 10 154 2 113 12 154 2 3 113 21 154 2 Trafic L2-H1 2014 3498 113 20 155 2 113 10 155 2 113 12 155 2 4 113 21 155 2 Master FWD-L1 2011 3182 113 20 137 113 10 137 113 12 137 3 113 21 137 Master FWD-L2 2010 3682 113 20 138 113 10 138 113 12 138 3 113 21 138 Master FWD-L3 2010 4332 113 20 139 113 10 139 113 12 139 4 113 21 139 Master RWD-L3 2010 3682 113 20 140 113 10 140 113 12 140 4 113 21 140 Master RWD-L4 2010 4332 113 20 141 113 10 141 113 12 141 5 113 21 141 2 Mounting without a bracket 3 with tread edge protection Toyota Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Proace L1H1 2007 3000 113 20 124 113 10 124 113 12 124 1 2 Proace L2H1 2007 3122 113 20 125 113 10 125 113 12 125 1 3 Proace L2H2 2007 3122 113 20 125 113 10 125 113 12 387 3 1 only H1 Volkswagen bott vario Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Caddy 2015 2682 113 20 333 2 113 10 333 2 113 12 333 2 3 Caddy Maxi 2015 3000 113 20 126 2 113 10 126 2 113 12 126 2 4 T6 L1 2015 3000 113 20 328 113 10 328 113 12 328 1 3 113 21 328 T6 L2 2015 3400 113 20 332 113 10 332 113 12 332 1 3 113 21 332 Crafter L1 2006 3250 113 20 114 113 10 114 113 12 114 3 113 21 114 Crafter L2 2006 3665 113 20 115 113 10 115 113 12 115 5 113 21 115 Crafter L3 2006 4325 113 20 116 113 10 116 113 12 116 6 113 21 116 Crafter L4 2006 4325* 113 20 117 113 10 117 113 12 117 7 113 21 117 *with overhang 1 H1 only 2 Mounting without a bracket 3 with tread edge protection 39

bott vario Side lining panels Express delivery available vario protect-light side lining options 4 3 1 1 3 2 1 Side lining panels = Basic set Side lining panels 1 Side lining panels + 2 sliding door panel + 3 = rear door set Complete set with rear and sliding door 1 Side lining panels + 2 + 4 Complete set with tailgate and = Tailgate set sliding door sliding door panel Express delivery available 40 www.bott.ie

bott vario Side lining panels vario protect-light in-vehicle lining Contoured side lining panels made from recyclable polypropylene Twin-wall sheets, 4 mm thick with a one-sided coarse texture Colour: light grey (RAL 7035) UV-stable, low weight, corrosion resistant, non-decomposable, chemical resistant Easy to clean Fixings included Citroën Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Nemo 2008 2513 122 25 093.95 Berlingo 2008 2728 122 25 062.95 122 25 062.95 Berlingo long 2008 2730 122 25 062.95 122 25 062.95 Jumpy L1-H1-H2 2007 3000 122 25 098.95 122 25 099.95 122 25 100.95 Jumpy L2-H1-H2 2007 3122 122 25 101.95 122 25 102.95 122 25 103.95 Jumper L1-H1 2006 3000 122 25 104.95 122 25 105.95 Jumper L1-H2 T* 2006 3000 122 25 144.95 122 25 145.95 Jumper L2-H1 2006 3450 122 25 106.95 122 25 107.95 Jumper L2-H2 T* 2006 3450 122 25 108.95 122 25 109.95 Jumper L3-H2 T* 2006 4035 122 25 110.95 122 25 111.95 Jumper L3-H3 T* 2006 4035 122 25 112.95 122 25 113.95 Jumper L4-H2 T* 2006 4035* 122 25 114.95 122 25 115.95 Jumper L4-H3 T* 2006 4035* 122 25 116.95 122 25 117.95 * with overhang T* Design with high roof lined over entire height bott vario Dacia Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Dacia Dokker 2012 2810 122 25 167.95 122 25 168.95 41

bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Fiat Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Fiorino 2008 2513 122 25 093.95 Doblò L1-H1 2010 2755 122 25 095.95 Doblò L2-H1 2010 3105 122 25 097.95 Doblò L1-H2 2010 2755 122 25 169.95 Doblò L2-H2 2010 3105 122 25 171.95 Scudo L1 2007 3000 122 25 098.95 122 25 099.95 122 25 100.95 Scudo L2 2007 3122 122 25 101.95 122 25 102.95 122 25 103.95 Ducato L1-H1 2006 3000 122 25 104.95 122 25 105.95 Ducato L1-H2 T* 2006 3000 122 25 144.95 122 25 145.95 Ducato L2-H1 2006 3450 122 25 106.95 122 25 107.95 Ducato L2-H2 T* 2006 3450 122 25 108.95 122 25 109.95 Ducato L3-H2 T* 2006 4035 122 25 110.95 122 25 111.95 Ducato L3-H3 T* 2006 4035 122 25 112.95 122 25 113.95 Ducato L4-H2 T* 2006 4035* 122 25 114.95 122 25 115.95 Ducato L4-H3 T* 2006 4035* 122 25 116.95 122 25 117.95 * with overhang T* Design with high roof lined over entire height Ford Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Transit Courier 2014 2489 122 25 221.95 122 25 222.95 Transit Connect L1 2014 2662 122 25 205.95 122 25 173.95 Transit Connect L2 2014 3062 122 25 188.95 122 25 172.95 Transit Custom L1 2012 2933 122 25 155.95 122 25 156.95 122 25 157.95 Transit Custom L2 2014 3300 122 25 158.95 122 25 159.95 122 25 160.95 Transit FWD / RWD L2-H2 2014 3300 122 25 189.95 122 25 190.95 Transit FWD / RWD L2-H3 2014 3300 122 25 191.95 122 25 192.95 Transit FWD / RWD L3-H2 2014 3750 122 25 193.95 122 25 194.95 Transit FWD / RWD L3-H3 2014 3750 122 25 195.95 122 25 196.95 Transit RWD L4-H3 2014 3750* 122 25 197.95 122 25 198.95 * with overhang T* Design with high roof lined over entire height Express delivery available 42 www.bott.ie

bott vario Side lining panels vario protect-light in-vehicle lining Hyundai Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door H350 L2 2014 3435 122 25 250.95 122 25 251.95 H350 L3 2014 3670 122 25 224.95 122 25 225.95 Iveco Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Daily L1-H1 2014 3000 122 25 230.95 122 25 231.95 Daily L2-H1 2014 3520 122 25 232.95 122 25 233.95 Daily L2-H2 2014 3520 122 25 234.95 122 25 235.95 Daily L3-H2-H3 2014 3520L* 122 25 236.95 122 25 237.95 Daily L4-H2-H3 2014 4100 122 25 226.95 122 25 227.95 Daily L5-H2-H3 2014 4100L* 122 25 228.95 122 25 229.95 * with overhang Mercedes-Benz Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Citan compact 2012 2313 122 25 161.95 122 25 162.95 Citan long 2012 2697 122 25 163.95 122 25 164.95 Citan extra long 2012 3081 122 25 165.95 122 25 166.95 Vito compact 2014 3200 122 25 212.95 122 25 213.95 122 25 214.95 Vito long 2014 3200 122 25 215.95 122 25 216.95 122 25 217.95 Vito extra long 2014 3430 122 25 218.95 122 25 219.95 122 25 220.95 Sprinter L1-H1 2006 3250 122 25 024.95 122 25 028.95 Crafter L1-H2 T* 2006 3250 122 25 025.95 122 25 029.95 Sprinter L2-H1 2006 3665 122 25 020.95 122 25 022.95 Sprinter L2-H2-H3 T* 2006 3665 122 25 021.95 122 25 023.95 Sprinter L3-H2-H3 T* 2006 4325 122 25 026.95 122 25 030.95 Sprinter L4-H2-H3 T* 2006 4325* 122 25 027.95 122 25 031.95 * with overhang T* Design with high roof lined over entire height bott vario 43

bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Nissan Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door NV 200 2009 2725 122 25 142.95** Primastar L1-H1 2016 3098 122 25 206.95 122 25 207.95 122 25 208.95 Primastar L2-H1 2016 3498 122 25 209.95 122 25 210.95 122 25 211.95 NV 400 L1-FWD-H1 2011 3182 122 25 128.95 122 25 130.95 NV 400 L1-FWD-H2 T* 2011 3182 122 25 129.95 122 25 131.95 NV 400 L2-FWD-H2-H3 T* 2010 3682 122 25 132.95 122 25 133.95 NV 400 L3-FWD-H2-H3 T* 2010 4332 122 25 134.95 122 25 135.95 NV 400 L3-RWD-H2-H3 T* 2010 3682 122 25 136.95 122 25 137.95 NV 400 L4-RWD-H2-H3 T* 2010 4332 122 25 138.95 122 25 139.95 T* Design with high roof lined over entire height ** also for versions with 2 sliding doors Opel Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Combo L1-H1 2010 2755 122 25 095.95 Combo L2-H1 2010 3105 122 25 097.95 Combo L1-H2 2010 2755 122 25 169.95 Combo L2-H2 2010 3105 122 25 171.95 Vivaro L1-H1 2014 3098 122 25 206.95 122 25 207.95 122 25 208.95 Vivaro L2-H1 2014 3498 122 25 209.95 122 25 210.95 122 25 211.95 Movano L1-FWD-H1 2011 3182 122 25 128.95 122 25 130.95 Movano L1-FWD-H2 T* 2011 3182 122 25 129.95 122 25 131.95 Movano L2-FWD-H2-H3 T* 2010 3682 122 25 132.95 122 25 133.95 Movano L3-FWD-H2-H3 T* 2010 4332 122 25 134.95 122 25 135.95 Movano L3-RWD-H2-H3 T* 2010 3682 122 25 136.95 122 25 137.95 Movano L4-RWD-H2-H3 T* 2010 4332 122 25 138.95 122 25 139.95 T* Design with high roof lined over entire height Express delivery available 44 www.bott.ie

bott vario Side lining panels vario protect-light in-vehicle lining Peugeot Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Bipper 2008 2513 122 25 093.95 Partner 2008 2728 122 25 062.95 122 25 062.95 Partner long 2008 2730 122 25 062.95 122 25 062.95 Expert L1-H1 2007 3000 122 25 098.95 122 25 099.95 122 25 100.95 Expert L2-H1-H2 2007 3122 122 25 101.95 122 25 102.95 122 25 103.95 Boxer L1-H1 2006 3000 122 25 104.95 122 25 105.95 Boxer L1-H2 T* 2006 3000 122 25 144.95 122 25 145.95 Boxer L2-H1 2006 3450 122 25 106.95 122 25 107.95 Boxer L2-H2 T* 2006 3450 122 25 108.95 122 25 109.95 Boxer L3-H2 T* 2006 4035 122 25 110.95 122 25 111.95 Boxer L3-H3 T* 2006 4035 122 25 112.95 122 25 113.95 Boxer L4-H2 T* 2006 4035* 122 25 114.95 122 25 115.95 Boxer L4-H3 T* 2006 4035* 122 25 116.95 122 25 117.95 * with overhang T* Design with high roof lined over entire height Renault Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Kangoo Compact 2013 2313 122 25 161.95 122 25 162.95 Kangoo 2013 2697 122 25 163.95 122 25 164.95 Kangoo Maxi 2013 3081 122 25 165.95 122 25 166.95 Trafic L1-H1 2014 3098 122 25 206.95 122 25 207.95 122 25 208.95 Trafic L2-H1 2014 3498 122 25 209.95 122 25 210.95 122 25 211.95 Master L1-FWD-H1 2011 3182 122 25 128.95 122 25 130.95 Master L1-FWD-H2 T* 2011 3182 122 25 129.95 122 25 131.95 Master L2-FWD-H2-H3 T* 2010 3682 122 25 132.95 122 25 133.95 Master L3-FWD-H2-H3 T* 2010 4332 122 25 134.95 122 25 135.95 Master L3-RWD-H2-H3 T* 2010 3682 122 25 136.95 122 25 137.95 Master L4-RWD-H2-H3 T* 2010 4332 122 25 138.95 122 25 139.95 T* Design with high roof lined over entire height bott vario 45

bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Toyota Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Proace L1-H1-H2 2007 3000 122 25 098.95 122 25 099.95 122 25 100.95 Proace L2-H1-H2 2007 3122 122 25 101.95 122 25 102.95 122 25 103.95 Volkswagen Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Caddy 2015 2682 122 25 041.95 122 25 252.95 122 25 252.95 Caddy Maxi 2015 3000 122 25 043.95 122 25 253.95 122 25 253.95 T6 L1-H1-H2 2015 3000 122 25 045.95 122 25 046.95 122 25 256.95 T6 L2-H1-H2 2015 3400 122 25 048.95 122 25 049.95 122 25 258.95 T6 L2-H-3 2015 3400 122 25 048.95 122 25 154.95 Crafter L1-H1 2006 3250 122 25 024.95 122 25 028.95 Crafter L1-H2 T* 2006 3250 122 25 025.95 122 25 029.95 Crafter L2-H1 2006 3665 122 25 020.95 122 25 022.95 Crafter L2-H2-H3 T* 2006 3665 122 25 021.95 122 25 023.95 Crafter L3-H2-H3 T* 2006 4325 122 25 026.95 122 25 030.95 Crafter L4-H2-H3 T* 2006 4325* 122 25 027.95 122 25 031.95 * with overhang T* Design with high roof lined over entire height Express delivery available 46 www.bott.ie

bott vario Side lining panels bott vario additional lining sets vario protect plus aluminium lining sets vario protect cargo wood composite lining sets 47

bott vario Side lining panels Express delivery available vario protect-light interior side lining for vehicles with 2 sliding doors 4 3 1 1 3 2 2 1 Side lining panels + 2 sliding door panel + 3 = rear door set Complete set with rear and sliding door 1 Side lining panels + 2 sliding door panel + 4 = Tailgate set Complete set with tailgate and sliding door 1 + 2 2 + 3 4 = Side lining panels sliding door panel Rear doors Tailgate set Complete set with tailgate, sliding door and rear doors Express delivery available 48 www.bott.ie

bott vario Side lining panels vario protect-light side lining for vehicles with 2 sliding doors Build year from Wheelbase mm [ 1+2+3 ] complete set Rear doors + Sliding door [ 1+2+4 ] complete set Tailgate + Sliding door Citroën Jumper / Fiat Ducato / Peugeot Boxer L1-H1 2006 3000 122 25 180.95 Citroën Jumper / Fiat Ducato / Peugeot Boxer L2-H1 2006 3000 122 25 176.95 Citroën Jumper / Fiat Ducato / Peugeot Boxer L2-H2 2006 3450 122 25 177.95 Citroën Jumper / Fiat Ducato / Peugeot Boxer L3-H2 2006 3450 122 25 178.95 Citroën Jumper L4-H2 / Fiat Ducato L5-H2 / Peugeot Boxer L4-H2 2006 4035* 122 25 179.95 Dacia Dokker 2012 2810 122 25 168.95 Ford Courier 2014 2489 122 25 223.95 Ford Transit Connect L1 2014 2662 122 25 203.95 Ford Transit Connect L2 2014 3062 122 25 204.95 Ford Transit FWD / RWD L2-H2 2014 3300 122 25 199.95 Ford Transit FWD / RWD L2-H3 2014 3300 122 25 200.95 Ford Transit FWD / RWD L3-H2 2014 3750 122 25 201.95 Ford Transit FWD / RWD L3-H3 2014 3750 122 25 202.95 Hyundai H1 2008 3200 122 25 170.95 Iveco Daily L1-H1 2014 3000 122 25 238.95 Iveco Daily L2-H1 2014 3520 122 25 239.95 Iveco Daily L2-H2 2014 3520 122 25 240.95 Iveco Daily L3-H2-H3 2014 3520L 122 25 241.95 Iveco Daily L4-H2-H3 2014 4100 122 25 242.95 Iveco Daily L5-H2-H3 2014 4100L 122 25 243.95 Mercedes-Benz Vito L1 2014 3200 122 25 244.95 122 25 245.95 Mercedes-Benz Vito L2 2014 3200 122 25 246.95 122 25 247.95 Mercedes-Benz Vito L3 2014 3430 122 25 248.95 122 25 249.95 Nissan NV 200 2009 2725 122 25 142.95 Nissan NV400 L1-H1 FWD/Opel Movano/Renault Master 2011 3182 122 25 181.95 Nissan NV400 L1-H1 FWD/Opel Movano/Renault Master 2011 3182 122 25 182.95 Nissan NV400 L2-H2 FWD/Opel Movano/Renault Master 2010 3682 122 25 183.95 Nissan NV400 L3-H2 FA/Opel Movano/Renault Master 2010 4332 122 25 184.95 Nissan NV400 L3-H2 RWD/Opel Movano/Renault Master 2010 3682 122 25 185.95 Nissan NV400 L4-H2 RWD/Opel Movano/Renault Master 2010 4332 122 25 186.95 VW Caddy Maxi 2015 3000 122 25 254.95 122 25 254.95 VW T6 short H1-H2 2015 3000 122 25 174.95 122 25 259.95 VW T6 long H1-H2 2015 3400 122 25 175.95 122 25 260.95 bott vario 49

bott Tainer Containers for flatbed vehicles Storage space organisation and load restraint on open loading areas 50 www.bott.ie

botttainer Containers for flatbed vehicles Order and convenience Stability High stability thanks to robust frame construction Hard-wearing surfaces: Sides and floors in galvanised sheet steel Body with edge protection profiles Optimal use of available space achieved using vario system components Drawer dividers for the organised storage of small parts Quick access to the most important equipment via side doors, roller shutters and internal drawers, without climbing onto the bed bott vario Protection and security Versatility Versatile versions with aluminium chequer plate lid or aluminium roller shutter Various storage space layouts and configurations Individual configuration also possible as alternative to package versions Easy securing of loads on the loading bed High weather and splash protection for tools and materials Theft protection for cargo through two-point locking mechanism Adjustable feet guarantee protection against floor dampness 51

botttainer Containers for flatbed vehicles botttainer For organising storage space and securing loads on flatbeds Systematic arrangement and securing of loads on the flatbed using subdivided storage compartments Quicker and more ergonomic access to the most important equipment via side doors, roller shutters, internal drawers without climbing onto the loading bed (depending on design) High stability thanks to robust frame construction Hard-wearing surfaces: Sides and floors in galvanised sheet steel, body with edge protection profiles. Tools and materials are splash-proof thanks to seals Theft protection for transport goods thanks to robust locks Raised feet guarantee protection from standing moisture Optimal use of available space achieved using vario system components Crash test verified pursuant to ECE R44 Individual configuration also possible as alternative to package versions 52 www.bott.ie

botttainer Containers for flatbed vehicles bott tainer with hinged lid Cover made of slip-resistant aluminium chequer plate Gas strut for securely keeping the cover open Secure safekeeping of transported goods via dual-interlock with robust locks External dimensions Internal dimensions Load capacity kg Weight kg 1750 x 650 x 760 1610 x 545 x 670 200 63 600 20 001.51M 1930 x 650 x 760 1790 x 545 x 670 200 69 600 20 002.51M botttainer with hinged lid and removable shelf Cover made of slip-resistant aluminium chequer plate Equipped with 2-piece, removable shelf Gas strut for securely keeping the cover open Secure transport goods safekeeping via dual-interlock with robust locks bott vario External dimensions Internal dimensions Load capacity kg Weight kg 1750 x 650 x 760 1610 x 545 x (290 + 370) 300 71 600 20 003.51M 1930 x 650 x 760 1790 x 545 x (290 + 370) 300 77 600 20 004.51M botttainer divider for shelves Divider for positioning above the shelf 630 01 110.98V 53

botttainer Containers for flatbed vehicles botttainer with a door and a hinged lid Cover made of slip-resistant aluminium chequer plate Side access doors available on either or both sides Equipped with 2-piece shelf Gas strut for securely keeping the cover open Secure safekeeping of transported goods via dual-interlock with robust locks External dimensions Internal dimensions Door position Load capacity kg Weight kg 1750 x 650 x 760 1610 x 545 x (290 + 370) Both sides 300 77 600 20 007.51M 1930 x 650 x 760 1790 x 545 x (290 + 370) Both sides 300 83 600 20 008.51M 1750 x 650 x 760 1610 x 545 x (290 + 370) Left or right* 300 74 600 20 005.51M 1930 x 650 x 760 1790 x 545 x (290 + 370) Left or right* 300 80 600 20 006.51M botttainer with doors and removable shelves Cover made of slip-resistant aluminium chequer plate Possible versions: left and right, each with 1 large door or each with 2 doors located one above the other with sturdy locks Firmly secured intermediate shelf Upper doors can also be opened even when the drop sides are up The lower compartment can optionally be equipped with drawers Drawer set* H x D mm Standard duty 40kg 1x 175 x 540 / 1x 300 x 540 600 22 011.19M Heavy duty 50kg 1x 175 x 795 / 1x 300 x 795 600 22 012.19M External dimensions Version Internal dimensions Load capacity kg Weight kg 1750 x 630 x 1130 4 doors 1610 x 545 x (440 + 590) 300 99 600 22 001.51M 1930 x 630 x 1130 4 doors 1790 x 545 x (440 + 590) 300 106 600 22 002.51M 1750 x 630 x 1130 2 doors 1610 x 545 x (440 + 590) 300 98 600 22 003.51M 1930 x 630 x 1130 2 doors 1790 x 545 x (440 + 590) 300 105 600 22 004.51M 54 www.bott.ie

botttainer Containers for flatbed vehicles botttainer available configurations behind hinged doors Kitted with * Drawer front height mm Load capacity kg Depth mm 1 drawer 1 x 300 mm 40 540 600 20 011.19M 50 795 600 20 014.19M 2 drawers plusproduct 1 x 125 / 1 x 175 mm 40 540 600 20 012.19M 50 795 600 20 015.19M 3 drawers 3 x 100 mm 40 540 600 20 013.19M 50 795 600 20 016.19M 1 variosort, 1 variosafe height L - 440 600 20 017.19M * Drawer position (left or right) must be specified when placing an order. (A botttainer with width 1,750 mm allows a maximum combination of 1 x system depth 795 mm and 1 x system depth 540 mm). plus Delivery incl. perfo panel and hook kit botttainer divider for shelves Divider for positioning above the shelf 630 01 110.98V bott vario 55

botttainer Containers for flatbed vehicles botttainer with hinged lid for pick-ups Compact transport box for all conventional pick-up models Cover made of slip-resistant aluminium chequer plate Gas strut for securely keeping the cover open Secure safekeeping of transported goods thanks to robust lock External dimensions Internal dimensions Load capacity kg Weight kg 1030 x 650 x 600 930 x 545 x 510 200 38 600 20 009.51M botttainer with roller shutters Weatherproof and lockable roller shutter made of robust aluminium Quick access to the complete usable volume plus Delivery incl. perfo panel and hook kit A B Illust. Configuration A 1365 x 710 x 1060 3 drawers, 2 trays, BottBoxen sliding shelves with bottboxen 600 21 008.51M B 1365 x 710 x 1060 6 drawers, drop-front shelves, BottBoxen sliding shelves with bottboxen plusproduct 600 21 009.51M 1365 x 710 x 1060 bottboxen sliding shelves with bottboxes 600 21 007.51M 1365 x 710 x 910 unkitted 600 21 010.51M 1365 x 710 x 910 drop-front shelves, bottboxen sliding shelves with bottboxen 600 21 011.51M 56 www.bott.ie

botttainer Containers for flatbed vehicles botttainer crane eyes 4 crane eyes for quick mobile transport Powder-coated Colour: jet black (RAL 9005) Fixings included 900 99 590.63 botttainer forklift base Forklift base for quick mobile transport Galvanised Includes fixing kit For botttainer D x H mm with cover 650 x 130 600 20 018.51M with shutter 710 x 130 600 21 006.51M bott vario botttainer top tray Top tray for hanging in the botttainer Fixing in place over the lid Galvanised Optional 13 small part storage box kit For botttainer D x H mm Top trays 341 x 583 x 92 600 20 024.51 Divider kit with 13 small parts storage boxes 325 x 525 630 20 192.36 57

botttainer Containers for flatbed vehicles bott flatbed storage compartment For mounting on the flatbed for fast and easy load securing For transporting shovels, brooms and other tools Width is adjustable from 1700-2136 mm, thus suitable for almost all flatbeds Robust construction made of weather-resistant aluminium chequer plate is closed at the ends when the drop sides are up. External dimensions 1700-2136 x 622 x 382 600 20 029.98V Fixing kit 900 99 667 58 www.bott.ie

botttainer Load-restraint blanket for flatbed vehicles Load-restraint blanket for flatbed vehicles For securing the load on the flatbed Especially well suited for loose or shapeless cargo Anti-theft protection thanks to the opaque fabric Tested according to VDI 2700 Load capacity up to 200 dan Colour: anthracite grey 4 blanket sizes for all common flatbed sizes Incl. lashing eyes for the drop sides Flatbed length Size / version 2100-2650 S 626 27 015.19V 2650-3200 M 626 27 016.19V 3200-3750 L 626 27 017.19V 3750-4300 XL 626 27 018.19V bott vario 59

bott vario Boot floor insert variocar boot floor inserts with lashing rails Plastic panel includes 2 lashing rails and 2 lashing straps with fitting and cam buckle Colour: black Strap length 2500 mm Fixed end of lashing strap 130 mm Attachment via 4 looped straps with cam buckle at lashing points in vehicle Build year Weight kg Audi A4 Avant from 06/15 7.6 619 03 080.10V BMW 3-Series Touring from 09/12 8.0 619 03 063.10V Ford C-Max from 05/15 7.9 619 03 079.10V Ford S-Max from 09/15 7.9 619 03 076.10V Ford Focus estate from 02/11 8.4 619 03 043.10V Mercedes Benz E-Class estate from 08/09 9.6 619 03 046.10V Opel Astra Sports Tourer from 11/10 7.4 619 03 023.10V Opel Insignia Sports Tourer from 04/09 8.0 619 03 026.10V Opel Zafira Tourer from 01/12 8.0 619 03 033.10V Renault Mégane Tourer from 06/09 7.5 619 03 036.10V Seat Alhambra from 10/10 8.6 619 03 060.10V Skoda Oktavia from 04/13 8.6 619 03 064.10V Volkswagen Caddy estate from 02/04 7.9 619 03 017.10V Volkswagen Golf estate from 04/13 8.0 619 03 073.10V Volkswagen Passat estate plusproduct from 10/14 8.4 619 03 067.10V Volkswagen Sharan from 09/10 8.6 619 03 029.10V Volkswagen Tiguan from 11/11 6.8 619 03 049.10V plus Delivery incl. perfo panel and hook kit 60 www.bott.ie

bott vario Base shelf infill variocar retaining rail for 4 variosafes on boot floor insert For mounting on boot floor insert Painted steel Colour: anthracite grey (RAL 7016) Includes 2 x fitting for rapid change of centre rail category 1: Audi A4 Avant, Ford S-Max, Ford Focus estate, Mercedes Benz C-Class estate, Mercedes Benz E-Class T-Model, Opel Astra Sports Tourer, Opel Insignia Sports Tourer, Seat Alhambra, Seat Exeo ST, VW Caddy estate, VW Golf estate, VW Passat estate, VW Sharan, VW Touran category 2: BMW Series-3 Touring, Opel Zafira, Renault Mégane Tourer, VW Tiguan Description System depth mm Matching vehicles Retaining rails for 4x variosafe 340 Group 1 60 x 890 x 25 619 03 011.19V Retaining rails for 4x variosafe 340 Group 2 60 x 780 x 25 619 03 030.19V variocar retaining rail for 1 variosafe on boot floor insert For mounting on boot floor insert Painted steel Colour: anthracite grey (RAL 7016) Description Matching vehicles Retaining rail for 1x variosafe, system depth 340 mm all types 29 x 331 x 22,5 619 03 010.19V bott vario 61

bott vario Modules profit from experience pre-configured modules for every sector 62 www.bott.ie

bott vario Modules The modularity of the bott vario line makes it wonderfully suited to configuring in vehicle equipment exactly according to individual needs. Standardised modules represent a quick and convenient alternative to order-based planning. They pool the experiences of bott planners and offer solutions for all industries and applications, as the selection of modules shows. bott vario Driver's side Passenger's side 63

bott vario Category I modules for small vans Standard modules for small vans Model manufacturer Wheelbase mm Build year from 525 mm 775 mm 1025 mm M 231 T 331 T 341 M 331 M 341 T 431 T 432 T 441 Citroën Nemo 2513 2008 Berlingo 2728 2008 2728L 2008 Dacia Fiat Dokker Express 2810 2012 Fiorino 2513 2008 Ford Mercedes- Benz Opel Doblo Transit Courier Transit Connect Transit Connect Citan Compact Citan long Citan Extra long Combo 2755 2010 3105 2010 2489 2014 2662 2014 3062 2014 2313 2012 2697 2012 3081 2012 2755 2011 3105 2011 Peugeot Bipper 2513 2008 Renault Partner Kangoo Compact 2728 2008 2728L 2008 2313 2013 Kangoo 2697 2013 Kangoo Maxi 3081 2013 Volkswagen Caddy 2862 2015 Caddy Maxi 3000 2015 Module suitable for use on the driver's side Module suitable for use on the passenger's side 64 www.bott.ie

bott vario Category I modules for small vans 1025 mm 1025 mm 1275 mm1275 mm 1525 mm1525 mm M 432 M 441 M 443 T 531 T 532 T 541 M 531 M 541 M 542 T 631 T 641 bott vario passende Matching Fahrzeuge vehicles Citroën Nemo Berlingo Dacia Dokker Fiat Fiorino Doblo Ford Transit Courier TransitConnect Mercedes-Benz Citan Opel Combo Peugeot Bipper Partner Renault Kangoo Volkswagen Caddy 65

bott vario Category II modules for medium vans manufacturer Standard modules for medium vans Model Wheelbase mm Build year from 1025 mm 1275 mm T 431 T 441 M 432 M 441 M 443 R 443 R 442 T 531 Citroën Fiat Ford Jumpy Scudo Transit Custom 3000 2007 3122 2007 3000 2007 3122 2007 2933 2013 3300 2013 Hyundai H1 3200 2014 Iveco Mercedes- Benz Daily Vito 3000 2014 3520L 2014 3200 2014 3200L 2014 Nissan Primastar 3430 2014 3098 2002 3498 2002 NV 200 2725 2010 Opel Peugeot Renault Toyota Volkswagen Vivaro Expert Trafic Proace T6 3098 2014 3498 2014 3000 2007 3122 2007 3098 2014 3498 2014 3000 2013 3122 2013 3000 2015 3400 2015 *front wheel drive + rear wheel drive Module suitable for use on the driver's side Module suitable for use on the passenger's side 66 www.bott.ie

bott vario Category II modules for medium vans M 542 1275 mm 1525 mm 1775 mm 2025 mm 2275 mm T 541 M 541 R 541 T 631 T 641 M 641 M 643 L 734 L 741 L 733 L 832 L 841 L 941 bott vario passende Matching Fahrzeuge vehicles Citroën Jumpy Fiat Scudo Ford Transit Custom Hyundai H1 Iveco Daily Mercedes-Benz Vito Nissan Primastar NV 200 Opel Vivaro Peugeot Expert Renault Trafic Volkswagen T5 67

bott vario Category III modules for large vans Standard modules for large vans Model manufacturer Wheelbase mm Build year from 1025 mm 1275 m T 441 M 432 M 441 M 443 T 531 T 541 M 541 M 542 Citroën Fiat Jumper Ducato 3000 2006 3450 2006 3000 2006 3450 2006 Ford Transit* 3300 2014 Hyundai H350 3043 2015 H350 3700 2014 Iveco Daily 3520 2014 Mercedes- Benz Sprinter 3250 2006 3665 2006 Nissan NV 400 L1 FWD NV 400 L2 FWD NV 400 L3 FA NV 400 L3 RWD 3182 2011 3682 2011 4332 2011 3682 2011 Opel Peugeot Renault Volkswagen Movano L1 FWD Movano L2 FA Movano L3 FA Movano L3 RWD Boxer Master L1 FWD Master L2 FA Master L3 FA Master L3 RWD Crafter 3182 2010 3682 2010 4332 2010 3682 2010 3000 2006 3450 2006 3182 2010 3682 2010 4332 2010 3682 2010 3250 2006 3665 2006 *front wheel drive + rear wheel drive Module suitable for use on the driver's side Module suitable for use on the passenger's side 68 www.bott.ie

bott vario Category III modules for large vans 1525 mm 2025 mm 2275 mm R 541 R 542 T 631 T 641 M 641 M 643 R 641 L 832 L 841 L 941 L 943 bott vario passende Matching Fahrzeuge vehicles Citroën Jumper Fiat Ducato Ford Transit Hyundai H350 Iveco Daily Mercedes-Benz Sprinter Nissan NV 400 Opel Movano Peugeot Boxer Renault Master Volkswagen Crafter 69

bott vario Modules Module T 331 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 3 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 775 x 340/240 x 900 15.0 600 99 008.19M Installation kit 635 10 030.51V Module T 341 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 3 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 775 x 440/340 x 1000 19.0 600 99 009.19M Installation kit 635 10 030.51V 70 www.bott.ie

bott vario Modules Module T 431 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 1025 x 340 x 900 18.0 600 99 010.19M Installation kit 635 10 030.51V Module T 432 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider bott vario Weight kg 1025 x 340/240 x 1000 19.0 600 99 011.19M Installation kit 635 10 030.51V 71

bott vario Modules Module T 441 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 1025 x 440 x 1000 23.0 600 99 012.19M Installation kit 635 10 030.51V Module T 531 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340 x 900 22.0 600 99 013.19M Installation kit 635 10 030.51V 72 www.bott.ie

bott vario Modules Module T 532 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340/240 x 1000 20.0 600 99 014.19M Installation kit 635 10 030.51V Module T 541 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1275 x 440 x 1000 27.0 600 99 015.19M Installation kit 635 10 030.51V 73

bott vario Modules Module T 631 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 340 x 900 27.0 600 99 016.19M Installation kit 635 10 030.51V Module T 641 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 440 x 1000 32.0 600 99 017.19M Installation kit 635 10 030.51V 74 www.bott.ie

bott vario Modules bott vario 75

bott vario Modules Module M 231 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 1 divider 1x pull-out/removable variosafe, height 190 mm 1x shelf with anti-slip mat and 1 divider Weight kg 525 x 340/240 x 900 13.0 600 99 018.19M Installation kit 635 10 030.51V Module M 331 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 2x drawer with anti-slip mat, height 125, 200 mm 2x variosort removable with 15 small parts boxes each 1x shelf with anti-slip mat and 1 divider Weight kg 775 x 340/240 x 900 24.0 600 99 019.19M Installation kit 635 10 030.51V 76 www.bott.ie

bott vario Modules Module M 341 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 2x drawer with anti-slip mat, height 150, 200 mm 1x variosort case shelf, variosort with 20 small parts boxes 1x shelf with anti-slip mat and 1 divider Weight kg 775 x 440/340 x 1000 30.0 600 99 055.19M Installation kit 635 10 030.51V Module M 432 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-frontand lashing rail 2x drawer with anti-slip mat, height 100, 200 mm 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 1 divider bott vario Weight kg 1025 x 340 x 1000 plusproduct 30.0 600 99 043.19M Installation kit 635 10 030.51V plus Delivery incl. perfo panel and hook kit 77

bott vario Modules Module M 441 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 1 divider 2x drawer with anti-slip mat, height 125 mm 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x 1000 30.0 600 99 021.19M Installation kit 635 10 030.51V Module M 443 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x variocart pull-out/removable 1x variosafe pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts storage boxes 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440/340 x 1100 37.0 600 99 044.19M Installation kit 635 10 030.51V 78 www.bott.ie

bott vario Modules Module M 531 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x variosort pull-out/removable with 20 small parts boxes 1x variosafe pull-out/removable, height 125 mm 1x drawer with anti-slip mat, height 125 mm 1x box shelf with 5 pull-out bottboxes 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340/240 x 1000 36.0 600 99 061.19M Installation kit 635 10 030.51V bott vario 79

bott vario Modules Module M 541 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x drawer with anti-slip mat, height 175 mm 2x variosort pull-out/removable with 20 small parts storage boxes 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x 1000 45.0 600 99 023.19M Installation kit 635 10 030.51V Module M 542 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front 1x drawer with anti-slip mat, height 200 mm 1x variocase, height 134 mm with dividers and cross dividers on a sliding shelf 1x variocase, height 83 mm, with 21 small parts storage boxes on a sliding shelf 2x box shelf with 3 bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x 1000 45.0 600 99 054.19M Installation kit 635 10 030.51V 80 www.bott.ie

bott vario Modules Module M 641 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x drawer with anti-slip mat, height 150, 150, 200 mm 1x variosafe pull-out; height 190 mm 1x variocase height 83 mm with 21 small parts boxes, on a sliding shelf 1x variocase height 134 mm, with dividers and cross dividers on a sliding shelf 1x shelf with anti-slip mat with 2 dividers Weight kg 1525 x 440 x 1100 62.0 600 99 024.19M Installation kit 635 10 030.51V Module M 643 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-frontand lashing rail 1x shelf with anti-slip mat and 1 divider 1x box shelf with lashing rail includes cam buckle strap 2x variosafe pull-out/removable, height 115, 190 mm 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1525 x 440/340 x 1100 plusproduct 41.0 600 99 045.19M Installation kit 635 10 030.51V plus Delivery incl. perfo panel and hook kit 81

bott vario Modules Module R 442 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 2x variosort removable with 20 small parts boxes 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x 1000 58.0 600 99 028.19M Installation kit 635 10 030.51V Module R 443 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x variosort pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts boxes 1x drawer with anti-slip mat, height 200 mm 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x 1000 44.0 600 99 046.19M Installation kit 635 10 030.51V 82 www.bott.ie

bott vario Modules Module R 541 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x variosort pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts boxes 1x drawer with anti-slip mat, height 200 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x 1000 59.0 600 99 029.19M Installation kit 635 10 030.51V Module R 542 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm access via sliding door 1x variocase, height 83 mm, with 21 small parts storage boxes on a sliding shelf 1x variocase, height 83 mm, with dividers on a sliding shelf 1x drawer with anti-slip mat, height 225 mm 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1275 x 440 x 1100 plusproduct 64.0 600 99 030.19M Installation kit 635 10 030.51V plus Delivery incl. perfo panel and hook kit 83

bott vario Modules Module R 641 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x shelf with anti-slip mat and 1 divider 2x drawer with anti-slip mat, height 125, 150 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 440 x 1100 67.0 600 99 031.19M Installation kit 635 10 030.51V Module L 733 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x drop-front shelf with drop-front, height 200 mm 1x box shelf with 4 pull-out bottboxes 1x load restraint set includes cam buckle strap 2x drawer with anti-slip mat, height 100, 150mm 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 3 dividers Weight kg 1775 x 340 x 1000 42.0 600 99 047.19M Installation kit 635 10 030.51V 84 www.bott.ie

bott vario Modules Module L 734 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x base compartment includes cam buckle strap 2x variosafe pull-out/removable, height 115, 190 mm 1x variosort pull-out/removable with 20 small parts boxes 2x shelf with anti-slip mat and 1 divider Weight kg 1775 x 340/240 x 1100 40.0 600 99 048.19M Installation kit 635 10 030.51V Module L 741 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x Eurobox shelf with 3 Euroboxes 1x drop-front shelf with drop-front, height 200 mm 3x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. cam buckle strap 2x box shelf with 3 pull-out bottboxes bott vario Weight kg 1775 x 440/340 x 1100 47.0 600 99 034.19M Installation kit 635 10 030.51V 85

bott vario Modules Module L 832 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 2x variosafe pull-out/removable, height 190 mm 2x variosort pull-out/removable with 20 small parts boxes 2x box shelf with 4 pull-out bottboxes 2x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. cam buckle strap 1x drop-front shelf with drop-front, height 200 mm plus Delivery incl. perfo panel and hook kit Weight kg 2025 x 340/240 x 1100 plusproduct 54.0 600 99 049.19M Installation kit 635 10 030.51V Module L 841 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x Eurobox shelf with 3 Euroboxes 1x drop-front shelf with drop-front, height 125 mm 2x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. restraint 2x box shelf with 4 pull-out bottboxes 1x Long-item top tray with side drop-front Weight kg 2025 x 440/340 x 1200 52.0 600 99 036.19M Installation kit 635 10 030.51V 86 www.bott.ie

bott vario Modules Module L 941 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and two dividers 2x box shelf with 5 bottboxes 1x load restraint kit incl. cam buckle strap 1x Eurobox shelf with 3 Euroboxes 1x shelf with anti-slip mat and 1 divider 1x drop-front shelf with drop-front, height 125 mm 1x long-item top tray with side drop-front Weight kg 2275 x 440/340 x 1200 59.00 600 99 037.19M Installation kit 635 10 030.51V Module L 943 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 bottboxes 1x load restraint kit incl. cam buckle strap 1x drop-front shelf with drop-front, height 200 mm 1x Eurobox tray with 3 Euroboxes 1x box shelf with 4 bottboxes 1x shelf with anti-slip mat and 1 divider plus bott vario Delivery incl. perfo panel and hook kit Weight kg 2275 x 440/340 x 1400 plusproduct 60.0 600 99 050.19M Installation kit 635 10 030.51V 87

bott vario Under-floor modules storage space organisation on 2 levels quick access to tools and materials generous space for large transported goods 88 www.bott.ie

bott vario Under-floor modules bott vario Lower level Convenient access to tools and materials via rear and side doors Drawers in 2 heights with high load capacity and side stability Clear organisation thanks to versatile drawer dividers Holds variosafe carry boxes for mobility at construction sites Space utilisation precisely adapted to the vehicle contour 100% full extension slides, 50 kg load capacity Upper level Space for large transported goods Sturdy floor panel with anti-slip surface High load bearing capacity (vehicle payload less the weight of the module) Integrated lashing eyes Ability to add bott vario modules, load-securing rails and heavy duty slides 89

bott vario Under-floor modules Bott vario underfloor modules in 2 construction heights (incl. pre-profiled flooring height) 210 mm 360 mm Free cargo area Theft protection, since the stored material is not visible from the outside Easy access via sliding and rear door Large storage space volume, lashing eyes on the raised floor panel Drawers with full extension slides Load capacity per drawer: 50 kg Info Please refer to page 268 onwards for matching dividers and cross dividers Citroën For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Nemo 2008 2513 210 1x 150 1x 150 600 10 068.19V Berlingo 2008 2728 210 2x 150 1x 150 600 10 066.19V Berlingo Maxi 2008 2728 210 2x 150 1x 150 600 10 067.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Dacia For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Dokker 2012 2810 210 2x150 1x 150 600 10 093.19V 90 www.bott.ie

bott vario Under-floor modules Fiat For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Fiorino 2008 2513 210 1x 150 1x 150 600 10 068.19V Doblò* 2010 2755 210 2x 150 1x 150 600 10 052.19V 360 2x 300 1x 300 600 10 053.19V 360 2x 300 2x 150 600 10 054.19V 360 2x 150 1x 300 1x 300 600 10 055.19V 360 2x 150 1x 300 2x 150 600 10 056.19V 360 4x 150 1x 300 600 10 057.19V 360 4x 150 2x 150 600 10 058.19V Doblò Maxi* 2010 3105 210 2x 150 1x 150 600 10 059.19V 360 2x 300 1x 300 600 10 060.19V 360 2x 300 2x 150 600 10 061.19V 360 2x 150 1x 300 1x 300 600 10 062.19V 360 2x 150 1x 300 2x 150 600 10 063.19V 360 4x 150 1x 300 600 10 064.19V 360 4x 150 2x 150 600 10 065.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). *In vehicles with tailgate, the under-floor module must be propped up. Ford For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Transit Courier 2014 2489 210 1x 150 1x 150 600 10 124.19V Transit Connect 2014 2662 210 2x 150 1x 150 600 10 112.19V 360 2x 300 1x 300 600 10 114.19V 360 2x 300 2x 150 600 10 115.19V bott vario 360 360 2x 150 1x 300 2x 150 1x 300 1x 300 600 10 116.19V 2x 150 600 10 117.19V 360 4x 150 2x 150 600 10 125.19V Transit Connect 2014 3062 210 2x 150 1x 150 600 10 113.19V 360 4x 150 1x 300 600 10 118.19V 360 2x 300 1x 300 600 10 119.19V 360 2x 300 2x 150 600 10 120.19V 360 2x 150 1x 300 1x 150 600 10 121.19V 360 2x 150 1x 300 2x 150 600 10 122.19V 360 4x 150 1x 300 600 10 123.19V 360 4x 150 2x 150 600 10 126.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). 91

bott vario underfloor modules Mercedes-Benz For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Citan 2012 2313 210 2x 150 600 10 111.19V Citan 2012 2697 210 2x 150 1x 150 600 10 094.19V 360 2x 300 1x 300 600 10 095.19V 360 2x 300 2x 150 600 10 096.19V 360 2x 150 1x 300 1x 300 600 10 097.19V 360 2x 150 1x 300 2x 150 600 10 098.19V 360 4x 150 1x 300 600 10 099.19V 360 4x 150 2x 150 600 10 100.19V Citan 2012 3081 210 2x 150 1x 150 600 10 101.19V 360 2x 300 1x 300 600 10 102.19V 360 2x 300 2x 150 600 10 103.19V 360 2x 150 1x 300 1x 300 600 10 104.19V 360 2x 150 1x 300 2x 150 600 10 105.19V 360 4x 150 1x 300 600 10 106.19V 360 4x 150 2x 150 600 10 107.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Opel For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Combo* 2011 2755 210 2x 150 1x 150 600 10 052.19V 360 2x 300 1x 300 600 10 053.19V 360 2x 300 2x 150 600 10 054.19V 360 2x 150 1x 300 1x 300 600 10 055.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). *In vehicles with tailgate, the under-floor module must be propped up. 360 2x 150 1x 300 2x 150 600 10 056.19V 360 4x 150 1x 300 600 10 057.19V 360 4x 150 2x 150 600 10 058.19V Combo* 2011 3105 210 2x 150 1x 150 600 10 059.19V 360 2x 300 1x 300 600 10 060.19V 360 2x 300 2x 150 600 10 061.19V 360 2x 150 1x 300 1x 300 600 10 062.19V 360 2x 150 1x 300 2x 150 600 10 063.19V 360 4x 150 1x 300 600 10 064.19V 360 4x 150 2x 150 600 10 065.19V 92 www.bott.ie

bott vario underfloor modules Peugeot For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Bipper 2008 2513 210 1x 150 1x 150 600 10 068.19V Partner 2008 2728 210 2x 150 1x 150 600 10 066.19V Partner Maxi 2008 2728 210 2x 150 1x 150 600 10 067.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). bott vario 93

bott vario Under-floor modules Renault For vehicle Build year from Wheelbase mm Construction heightmm Quantity of drawers, rear mm Quantity of drawers, side mm Kangoo 2013 2313 210 2x 150 600 10 111.19V Kangoo L1 2013 2697 210 2x 150 1x 150 600 10 094.19V 360 2x 300 1x 300 600 10 095.19V 360 2x 300 2x 150 600 10 096.19V 360 2x 150 1x 300 1x 300 600 10 097.19V 360 2x 150 1x 300 2x 150 600 10 098.19V 360 4x 150 1x 300 600 10 099.19V 360 4x 150 2x 150 600 10 100.19V Kangoo L2 2013 3081 210 2x 150 1x 150 600 10 101.19V 360 2x 300 1x 300 600 10 102.19V 360 2x 300 2x 150 600 10 103.19V 360 2x 150 1x 300 1x 300 600 10 104.19V 360 2x 150 1x 300 2x 150 600 10 105.19V 360 4x 150 1x 300 600 10 106.19V 360 4x 150 2x 150 600 10 107.19V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Volkswagen For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Caddy 2003 2682 210 2x 150 1x 150 600 10 038.19V 360 2x 300 1x 300 600 10 039.19V 360 2x 300 2x 150 600 10 040.19V 360 2x 150 1x 300 1x 300 600 10 041.19V 360 2x 150 1x 300 2x 150 600 10 042.19V 360 4x 150 1x 300 600 10 043.19V 360 4x 150 2x 150 600 10 044.19V Caddy Maxi 2007 3000 210 2x 150 1x 150 600 10 045.19V 360 2x 300 1x 300 600 10 046.19V 360 2x 300 2x 150 600 10 047.19V 360 2x 150 1x 300 1x 300 600 10 048.19V 360 2x 150 1x 300 2x 150 600 10 049.19V 360 4x 150 1x 300 600 10 050.19V 360 4x 150 2x 150 600 10 051.19V Caddy Life 1 2003 2682 210 2x 150 600 10 091.19V Caddy Maxi Life 1 2007 3000 210 2x 150 600 10 092.19V Caddy Maxi Life 1 2 2007 3000 210 2x 150 600 10 110.19V 1 with 2 lashing rails integrated in the drop-front shelf, variocar can also be installed, 2 for vehicles with factory-fitted VW bulkhead 94 www.bott.ie

bott vario Under-floor modules Volkswagen A long parts compartment with drop-front is located between the under-floor modules A hardtop must be in place over the loading surface, as the components are not weather-resistant. Includes anti-slip mat for drawers For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm VW Amarok crew cab with hardtop 2010 3095 210 2x 150 600 10 089.19V 360 2x 300 600 10 090.19V VW Amarok crew cab with hardtop 2010 3095 360 2x 150 + 1x 300 600 10 108.19V 360 2x 150 + 2x 150 600 10 109.19V bott vario 95

bott vario In practice 96 www.bott.ie

bott vario Reference examples For vehicle occupants, putting on the safety belt is a matter of course. Every driver knows that being secured firmly to the vehicle is essential for safety. But what about the cargo behind the passengers? bott vario Even with minor evasive manoeuvres, slipping loads can impair the driving precision of the vehicle as well as the concentration of the driver. For this reason, load restraint is one of the most important tasks fulfilled by in-vehicle equipment. 97

bott Load restraint in practice 98 www.bott.ie

bott vario Reference examples bott vario Whether large and bulky, high and narrow, or thin and long bott vario offers the correct solution for safely securing any load or material for transportation. This way, vehicle owners and loaders, who like drivers must also follow strict legal requirements, are also on the safe side with respect to the law. 99

bott vario Heavy duty sliding platforms Heavy duty sliding platforms with 4 lashing eyes Platform locking mechanism engages automatically when closed: secures platform for transit Locks into position when fully open: allows for safe platform loading and unloading Smooth-operating telescopic slides: Easy one-handed operation Max load = 180 kg: high dynamic load capacity With 4 lashing eyes on the corners: secure fixing for tied-down loads System dimensions Actual dimensions approx. W x D mm Slide extension mm Weight kg 525 x 775 x 96 463 x 771 550 12.2 612 20 008.19V 525 x 1040 x 96 463 x 1036 730 16.2 612 20 010.19V 525 x 1275 x 96 463 x 1271 890 18.2 612 20 012.19V 775 x 775 x 96 713 x 771 550 16.2 612 20 014.19V 775 x 1040 x 96 713 x 1036 730 19.2 612 20 016.19V 900 x 900 x 96 899 x 901 630 20.2 612 20 018.19V 1025 x 775 x 96 963 x 771 550 19.2 612 20 020.19V Full extension heavy duty sliding platform 200 kg Multiplex worktop 30 mm 200 kg load capacity Full extension Locks automatically into position when fully extended or fully closed Slide extension mm Weight kg 620 x 1000 x 120 960 48 112 20 029 100 www.bott.ie

bott vario variopin locking system variopin, the electronic locking system for in-vehicle equipment Access authorisations are easily assigned without keys using a master code and PUK Up to 100 individual programmable 4- to 8-digit PIN codes Power supply via three 1.5 V AA batteries, included with delivery Battery service life up to 5 years Low-battery warning indicator Version for drawer cabinets Opened by entering code No additional unlocking device required Close by pressing the OK button or automatically after 8 hours The automatic closure time can be individually set between 30 seconds and 9 hours using the optional programming device Version for hinged door cupboards Opened by entering code Closed by rotating the lock PreLock function for opening and closing without code entry Info See page 44 for the corresponding programming software for advanced functions bott vario 101

bott vario Drawer dividers Small parts storage box kits Removal of individual boxes possible Colour: iron grey (RAL 7011) Height 75 mm For customised division of drawers Rounded corners for easy removal of small parts Cabinet dimensions width 425 x depth 440 mm A B Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes A 2 3 2 2 2 from 100 mm 75 mm 630 20 184.36V B 6 6 3 1 1 1 from 100 mm 75 mm 630 20 185.36V Cabinet dimensions width 425 x depth 540 mm rotated drawer version 525 x 440 C D Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes C 4 8 1 1 1 1 1 1 from 100 mm 75 mm 630 20 035.36V D 4 14 3 1 1 1 from 100 mm 75 mm 630 20 036.36V 102 www.bott.ie

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 425 x depth 640 mm E F Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes E 2 3 1 3 2 3 1 from 100 mm 75 mm 630 20 188.36V F 8 14 3 2 4 from 100 mm 75 mm 630 20 189.36V Cabinet dimensions width 425 x depth 795 mm rotated drawer version 775 x 440 G H Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes G 2 7 1 4 1 3 2 from 100 mm 75 mm 630 20 037.36V H 8 11 9 4 2 1 from 100 mm 75 mm 630 20 038.36V bott vario 103

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 525 x depth 340 mm I J Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes I 1 4 1 1 2 2 from 100 mm 75 mm 630 20 041.36V J 1 6 5 2 1 1 from 100 mm 75 mm 630 20 042.36V Cabinet dimensions width 525 x depth 440 mm K L Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes K 3 3 1 2 2 1 from 100 mm 75 mm 630 20 043.36V L 6 1 9 4 2 from 100 mm 75 mm 630 20 044.36V Cabinet dimensions width 525 x depth 540 mm rotated drawer version 540 x 525 M N Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes M 2 3 1 2 2 1 3 1 from 100 mm 75 mm 630 20 045.36V N 5 5 11 1 1 1 1 1 from 100 mm 75 mm 630 20 046.36V 104 www.bott.ie

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 525 x depth 640 mm O P Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes O 1 2 1 2 2 6 1 from 100 mm 75 mm 630 20 190.36V P 4 7 9 8 2 2 from 100 mm 75 mm 630 20 191.36V Cabinet dimensions width 525 x depth 795 mm rotated drawer version 540 x 775 Q R Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes Q 1 4 3 4 3 2 3 from 100 mm 75 mm 630 20 047.36V R 13 15 5 4 2 1 2 from 100 mm 75 mm 630 20 048.36V bott vario 105

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 775 x depth 340 mm S T Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes S 3 1 1 2 1 3 1 from 100 mm 75 mm 630 20 051.36V T 9 11 4 2 from 100 mm 75 mm 630 20 052.36V Cabinet dimensions width 775 x depth 440 mm U V Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes U 3 4 2 3 1 2 from 100 mm 75 mm 630 20 053.36V V 9 3 9 6 2 1 1 from 100 mm 75 mm 630 20 054.36V 106 www.bott.ie

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 775 x depth 540 mm W X Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes W 2 5 4 4 2 2 2 from 100 mm 75 mm 630 20 055.36V X 9 5 11 2 2 2 2 2 from 100 mm 75 mm 630 20 056.36V Cabinet dimensions width 775 x depth 640 mm Y Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes Y 9 4 7 5 6 2 2 from 100 mm 75 mm 630 20 057.36V bott vario Cabinet dimensions width 775 x depth 795 mm Z Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes Z 9 7 9 8 7 1 3 from 100 mm 75 mm 630 20 058.36V 107

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 1025 x depth 340 mm A B Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes A 2 5 1 1 2 2 3 2 from 100 mm 75 mm 630 20 059.36V B 8 11 11 4 2 1 from 100 mm 75 mm 630 20 060.36V Cabinet dimensions width 1025 x depth 440 mm C D Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes C 2 3 4 2 6 1 3 from 100 mm 75 mm 630 20 061.36V D 15 9 3 4 3 3 1 2 from 100 mm 75 mm 630 20 062.36V Cabinet dimensions width 1025 x depth 540 mm E F Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes E 4 4 5 5 4 4 3 3 from 100 mm 75 mm 630 20 063.36V F 16 12 9 7 2 3 3 from 100 mm 75 mm 630 20 064.36V 108 www.bott.ie

bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 1025 x depth 640 mm G Quantity of small parts storage boxes mm 50 x 50 50 x 75 75 x 75 75 x 150 150 x 150 100 x 150 125 x 150 275 x 150 Front height of drawer Height of boxes G 14 9 17 5 6 1 2 3 from 100 mm 75 mm 630 20 065.36V Labelling kit, for small parts storage boxes Downloadable label document templates are available free of charge at at www.bott.de/download Includes 30 label holders Contains 10 DIN A4 sheets, each with 40 label strips 630 20 102.90V bott vario 109

bott vario Drawer dividers Dividers and cross dividers Kits for dividing drawers Natural aluminium Each divider supplied with 2 holders 75 mm high dividers for drawer heights of 100/125 mm 125 mm high dividers for drawer heights of 150mm or above Dividers for longitudinal division of drawers Cabinet depth mm Pack quantity Front height of drawer mm Height of cross dividers mm 340 2 440 2 540 2 640 2 795 2 100/125 75 630 01 001.19V from 150 mm 125 630 01 006.19V 100/125 75 630 01 002.19V from 150 mm 125 630 01 007.19V 100/125 75 630 01 003.19V from 150 mm 125 630 01 008.19V 100/125 75 630 01 004.19V from 150 mm 125 630 01 009.19V 100/125 75 630 01 005.19V from 150 mm 125 630 01 010.19V Dividers for transverse division of drawers Cabinet depth mm Pack quantity Front height of drawer mm Height of cross dividers mm 425 2 525 2 100/125 75 630 01 021.19V from 150 mm 125 630 01 023.19V 100/125 75 630 01 022.19V from 150 mm 125 630 01 024.19V 110 www.bott.ie

bott vario Drawer dividers Cross dividers for customised division of drawers Cross divider width mm Pack quantity Front height of drawer mm Height of cross dividers mm 100 7 125 7 150 7 200 7 100/125 75 630 02 009.19V from 150 mm 125 630 02 013.19V 100/125 75 630 02 010.19V from 150 mm 125 630 02 014.19V 100/125 75 630 02 011.19V from 150 mm 125 630 02 015.19V 100/125 75 630 02 012.19V from 150 mm 125 630 02 016.19V bott vario 111

bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 425 mm - rotated cabinet version 440 mm A Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm A 440 2 3 100/125 75 630 20 180.19V from 150 mm 125 630 20 181.19V Cabinet dimensions width 425 mm rotated cabinet version 440 mm B C D Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm B 540/525 2 3 C 640 2 4 D 795/1025 3 4 100/125 75 630 20 001.19V from 150 mm 125 630 20 002.19V 100/125 75 630 20 186.19V from 150 mm 125 630 20 187.19V 100/125 75 630 20 003.19V from 150 mm 125 630 20 004.19V 112 www.bott.ie

bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 525 mm E F G Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm E 340 2 4 F 440 2 4 G 640 2 4 100/125 75 630 20 007.19V from 150 mm 125 630 20 008.19V 100/125 75 630 20 009.19V from 150 mm 125 630 20 010.19V 100/125 75 630 20 182.19V from 150 mm 125 630 20 183.19V Cabinet dimensions width 525 mm - rotated cabinet version 540 mm - suitable for underfloor modules H Cabinet depth mm I Quantity Dividers H 540/525 2 4 Quantity Cross dividers Front height of drawer mm Height of cross dividers mm 100/125 75 630 20 011.19V from 150 mm 125 630 20 012.19V bott vario I 795/1025 3 4 100/125 75 630 20 013.19V from 150 mm 125 630 20 014.19V 113

bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 775 mm J K Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm J 340 4 5 K 440 4 5 100/125 75 630 20 017.19V from 150 mm 125 630 20 018.19V 100/125 75 630 20 019.19V from 150 mm 125 630 20 020.19V Cabinet dimensions width 775 mm L M N Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm L 540 4 5 M 640 4 5 N 795 4 5 100/125 75 630 20 021.19V from 150 mm 125 630 20 022.19V 100/125 75 630 20 023.19V from 150 mm 125 630 20 024.19V 100/125 75 630 20 025.19V from 150 mm 125 630 20 026.19V Cabinet dimensions width 1025 mm O P Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm O 340 4 4 P 440 4 4 100/125 75 630 20 027.19V from 150 mm 125 630 20 028.19V 100/125 75 630 20 029.19V from 150 mm 125 630 20 030.19V 114 www.bott.ie

bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 1025 mm Q R Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm Q 540 4 4 R 640 4 4 100/125 75 630 20 031.19V from 150 mm 125 630 20 032.19V 100/125 75 630 20 033.19V from 150 mm 125 630 20 034.19V Cabinet dimensions width 1025 mm S T Cabinet depth mm Quantity Dividers S 340 6 7 T 440 6 7 Quantity Cross dividers Front height of drawer mm Height of cross dividers mm 100/125 75 630 20 129.19V from 150 mm 125 630 20 130.19V 100/125 75 630 20 131.19V from 150 mm 125 630 20 132.19V bott vario Cabinet dimensions width 1025 mm U V Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm U 540 6 7 V 640 6 7 100/125 75 630 20 133.19V from 150 mm 125 630 20 134.19V 100/125 75 630 20 135.19V from 150 mm 125 630 20 136.19V 115

bott vario Drawer dividers Shelf dividers Incl. 2 plastic divider holders per divider Natural aluminium Colour of the divider holder: anthracite grey (RAL 7016) Pack quantity 30 x 240 x 75 2 630 01 116.19V 30 x 340 x 75 2 630 01 117.19V 30 x 440 x 75 2 630 01 118.19V 30 x 540 x 75 2 630 01 119.19V 30 x 640 x 75 2 630 01 120.19V Drop front shelf dividers Incl. 1 plastic divider holder and fixing screw per divider Dividers up to 640 mm deep made of natural aluminium, 795 mm deep dividers made of from sheet steel Colour of the divider holder: anthracite grey (RAL 7016) Pack quantity 30 x 340 x 75 2 630 01 131.19V 30 x 440 x 75 2 630 01 132.19V 30 x 540 x 75 2 630 01 133.19V 30 x 640 x 75 2 630 01 134.19V 30 x 795 x 75 2 630 01 135.19V 116 www.bott.ie

bott vario Drawer dividers Desk panels for drawers For inserting into a drawer with drawer height 100 mm Includes 3 dividers Thickness 12 mm For system width mm For system depth mm 440* 525 621 01 143.22V 440* 775 621 01 144.22V 525 440 621 01 145.22V 525 540 621 01 146.22V 540* 775 621 01 147.22V 775 440 621 01 148.22V 775 540 621 01 149.22V 1025 440 621 01 150.22V 1025 540 621 01 151.22V *for rotated cabinet Suspended file frame for drawers Powder-coated steel suspended file frame, white aluminium (RAL 9006) For holding file holders DIN A4 Suitable for drawers with drawer height 300 mm Includes fixing material for mounting in drawer Suitable for drawers with system dimensions 525 x 440 mm, rotated drawer 440 x 525 mm bott vario 424 x 336 x 245 630 03 001.37V 117

bott vario Drawer dividers bott vario foam inlay for manual trimming Clear arrangement of tools Unique definition of storage locations and contents Missing items immediately noticed Cut-outs can be accurately made with the cutter set with a few simple steps Can be adjusted to other drawer sizes by trimming or by using multiple mats Perfect for use in combination with full extension slides Material/colour: Underlay: XPE 33, thickness 5 mm / red insert: PE 30, thickness 22 mm / black Properties: PE 30 laminated, heat-resistant up to 112 C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly Actual dimensions approx. W x D mm Weight kg 525 x 440 x 27 425 x 375 0.1 613 01 119.10V 525 x 540 x 27 425 x 475 0.2 613 01 120.10V 775 x 440 x 27 675 x 375 0.2 613 01 121.10V 775 x 540 x 27 675 x 475 0.3 613 01 122.10V 1025 x 440 x 27 925 x 375 0.3 613 01 123.10V 1025 x 540 x 27 925 x 475 0.4 613 01 124.10V Cutter set for foam inlay with a storage case 3 cutters with protective covers 1x width 20 mm, 1x width 50 mm, 1x semicircular, 20 x 20 x 80 mm Cutter Folding ruler Weight kg 225 x 170 x 45 0.4 130 17 001.10V 118 www.bott.ie

bott vario Drawer dividers Inserts for drawers Spray can insert,for storing 13 spray cans, max. Ø 73 mm Cartridge insert,for storing 24 cartridges, max. Ø 53 mm Nozzle insert with 4 x 75mm high small parts storage boxes with space for 143 nozzles, max. Ø 22 mm For drawers W x D mm of the insert Aerosol can insert 525 x 340 393 x 264 x 130 613 01 127.19V Cartridge storage insert 525 x 340 393 x 264 x 130 613 01 128.19V Nozzle insert 525 x 440 330 x 380 x 55 613 01 140.10V bott vario 119

bott vario Mobile working Folding worktop For working with materials outside of the vehicle Sheet steel, galvanised Cross-laminated beech multiplex worktop with an oiled finish Version with turntable and 125 mm vice 240 x 300 x 900 612 20 006.51V with 125 mm vice 220 x 300 x 900 612 20 007.51V without vice 155x 300 x 900 612 20 001.51V 120 www.bott.ie

bott vario Mobile working Retractable worktop For working with materials outside of the vehicle Sheet steel, galvanised Cross-laminated beech multiplex worktop with an oiled finish System width mm with turntable and 125 mm vice 775 612 20 004.51V without vice 775 612 20 002.51V with turntable and 125 mm vice 1025 612 20 005.51V without vice 1025 612 20 003.51V Slide with vice Vice slide for individual installation Clamping handle for infinately variable clamping of the slide Adjustment 600 mm Cross brace is required. bott vario Version Weight packed 920 x 125 x 110 incl. vice 75 mm 4.3 612 20 026.51V 945 x 125 x 150 incl. vice 100 mm 8.4 612 20 027.51V 945 x 135 x 165 incl. vice 100 mm + turntable 9.0 612 20 028.51V 121

122 www.bott.ie

bott vario Mobile workstation Heavy duty folding worktop Heavy duty folding worktop incl. stable support leg for heavy work Folding mechanism supported by 2 gas struts Adjustable working height 775-1015 mm Suitable for all bott vices up to a jaw width of 175 mm (turntable only up to jaw width of 150 mm) plus Delivery incl. perfo panel and hook kit Version 230 x 270 x 1100 Heavy duty worktop 612 20 024.51V 230 x 270 x 1100 plusproduct with turntable and vice S-150 612 20 029.51V Support leg with snap fastener For use with folding and sliding worktops Continuous height adjustment from 730-1355 mm Secured at chosen height with clamping handle Snap fastener bott vario Height mm 730-1355 114 25 002 123

bott vario Mobile workstation Folding seat with upholstery Powder coated steel Colour: anthracite grey (RAL 7016) Upholstered cushion Height adjustable from 320 435 mm Automatically folding support leg with gas strut support For mounting on an endframe or a wall mount Height-adjustable in 19 mm increments 300 x 80 x 650 630 03 002.19V Folding seat wall mount Powder coated steel Colour: anthracite grey (RAL 7016) Alternative attachment point when an endframe is not available 236 x 85 x 650 630 03 003.19V 124 www.bott.ie

bott vario Long-item transportation Long-item top tray Anodised aluminium: low weight with easy-to-clean surface Access gained via latched drop-front Convenient to load and unload without entering the vehicle Height 100 mm W x D mm 1450-2600 x 220 625 33 192.97V 1450-2600 x 300 625 33 193.97V 2050-3850 x 220 625 33 202.97V 2050-3850 x 300 625 33 194.97V 3800-5300 x 300 x 100 625 33 383.97V 2060 x 300 x 100 625 33 195.97V Anti-slip mat for long-item top tray Mat thickness = 3 mm bott vario W x D mm 2595 x 213 613 01 112.10V 2595 x 293 613 01 113.10V 3845 x 213 613 01 118.10V 3845 x 293 613 01 114.10V 2035 x 293 613 01 115.10V 5295 x 293 613 01 138.10V 125

bott vario Long-item transportation Wall bracket for long-item top tray Used to secure long-item top tray to partition or side wall Powder coated steel Colour: anthracite grey (RAL 7016) Continuous angle adjustment from 90 112 35 x 225 x 250 635 02 010.19V 126 www.bott.ie

bott vario Gas cylinder transportation Gas cylinder restraint system with lashing strap Provides a safe means of transporting up to 2 gas cylinders Strap length 1000 mm Load capacity up to 500 dan Design 1: with 1 retaining rail and 1 ratchet strap Design 2: with 2 retaining rails and 2 ratchet straps For system depth mm Version Rail length mm 340 1 270 126 15 007.98V 340 2 270 126 15 008.98V 440 1 370 126 15 009.98V 440 2 370 126 15 010.98V 540 1 470 126 15 011.98V 540 2 470 126 15 012.98V Gas bottle cabinet with ventilation For storing and safely transporting compressed gasses Housing: Powder-coated sheet steel Colour: anthracite grey (RAL 7016) Door made of anodised aluminium Supplied with vent for floor mounting Enclosed cabinet with rubber door seal Lockable bott vario 525 x 440 x 800 600 18 001.97V 127

bott vario Gas cylinder transportation Vertical refrigerant shelf For storing refrigerant bottles Includes 1 anodised aluminium storage shelf and anti-slip mat Endframes: Powder-coated sheet steel Colour: anthracite grey (RAL 7016) Bottles are secured with ratchet straps System dimensions Quantity Straps 850 x 340 x 900 6 600 99 003.19M 1025 x 340 x 900 6 600 99 001.19M 1100 x 340 x 900 8 600 99 004.19M 1275 x 340 x 900 8 600 99 002.19M 128 www.bott.ie

bott vario Ventilation Roof- or side-mounted vent Provides roof or side ventilation when transporting compressed gases Plastic: black Requires 76 x 216 mm cut-out Low-profile design means vehicle can still be cleaned in a car-wash 205 x 355 x 50 808 33 215.10V bott vario 129

bott vario Ventilation Floor-mounted vent square Provides floor ventilation when transporting compressed gas cylinders Sheet steel, galvanised With duct and water deflection plate Requires 130 x 130 mm cut-out 164 x 164 x 80 080 32 021 Floor-mounted vent rectangular Provides floor ventilation when transporting compressed gas cylinders Stainless-steel vent grille With duct and water deflection plate Requires 250 x 72 mm cut-out 280 x 122 x 90 080 12 022 130 www.bott.ie

bott vario Window grilles Window grilles for sliding doors, tailgates and rear doors Protects against theft from vehicle Protects vehicle from possible damage from loaded goods Powder coated steel Colour: anthracite grey (RAL 7016) Grille spacing 25 mm Rear door design includes both left and right sides Additional variations available upon request type Build year from For door type: Citroën Jumper, Fiat Ducato, Peugeot Boxer 2006 Rear doors 122 30 026.19V Citroën Jumper, Fiat Ducato, Peugeot Boxer L1 2006 Sliding door 122 30 027.19V Citroën Jumper L2-L4, Fiat Ducato L2-L4, Peugeot Boxer L2-L4 2006 Sliding door 122 30 028.19V Fiat Doblo, Opel Combo H1 2010 Rear doors 122 30 049.19V Ford Transit Courier L1 2014 Rear doors 122 30 050.19V Ford Transit Courier L1 2014 Right sliding door 122 30 051.19V Ford Transit Courier L1 2014 Left sliding door 122 30 052.19V Ford Transit Courier L1 2014 Left side window 122 30 058.19V Ford Transit Custom H1 2012 Rear doors 122 30 038.19V Ford Transit Custom 2012 Right sliding door 122 30 039.19V Ford Transit Custom 2012 Left sliding door 122 30 048.19V Ford Transit Connect 2014 Rear doors 122 30 043.19V Ford Transit Connect L1 2014 Right sliding door 122 30 044.19V Ford Transit Connect L1 2014 Left sliding door 122 30 045.19V Ford Transit Connect L2 2014 Right sliding door 122 30 046.19V Ford Transit Connect L2 2014 Left sliding door 122 30 047.19V Ford Transit 2014 Rear doors 122 30 040.19V Ford Transit 2014 Right sliding door 122 30 041.19V Ford Transit 2014 Left sliding door 122 30 042.19V Iveco Daily L2-L5 2014 Rear doors 122 30 066.19V Iveco Daily L2-L5 2014 Right sliding door 122 30 067.19V Iveco Daily L2-L5 2014 Left sliding door 122 30 068.19V Mercedes-Benz Vito 2014 Rear doors 122 30 031.19V Mercedes-Benz Vito 2014 Tailgate 122 30 065.19V Mercedes-Benz Vito 2014 Right sliding door 122 30 053.19V Mercedes-Benz Vito 2014 Left sliding door 122 30 054.19V Mercedes-Benz Sprinter, Volkswagen Crafter 2006 Rear doors 122 30 018.19V Mercedes-Benz Sprinter, Volkswagen Crafter L1 2006 Sliding door 122 30 019.19V Mercedes-Benz Sprinter, Volkswagen Crafter L2-L4 2006 Sliding door 122 30 020.19V Nissan Primastar, Opel Vivaro, Renault Trafic 2014 Rear doors 122 30 021.19V Nissan Primastar, Opel Vivaro, Renault Trafic 2014 Tailgate 122 30 036.19V Opel Vivaro, Renault Trafic 2014 Right sliding door 122 30 059.19V Opel Vivaro, Renault Trafic 2014 Left sliding door 122 30 060.19V Nissan NV400, Opel Movano, Renault Master 2010 Rear doors 122 30 023.19V Nissan NV400, Opel Movano, Renault Master L1 2010 Sliding door 122 30 024.19V Nissan NV400, Opel Movano, Renault Master L2-L4 2010 Sliding door 122 30 025.19V bott vario 131

bott vario Window grilles Window grilles for sliding doors, tailgates and rear doors Volkswagen type Build year from For door type: Volkswagen Caddy, Volkswagen Caddy Maxi 2015 Rear doors 122 30 009.19V Volkswagen Caddy, Volkswagen Caddy Maxi 2015 Tailgate 122 30 062.19V Volkswagen T6 2015 Rear doors 122 30 029.19V Volkswagen T6 2015 Tailgate 122 30 063.19V Volkswagen T6 2015 Sliding door 122 30 030.19V Window grilles for the vehicle bulkhead For protecting driver and passenger Powder coated steel Colour: anthracite grey (RAL 7016) Grille spacing 25 mm type Build year from Citroën Jumpy, Fiat Scudo, Peugeot Expert 2006 122 30 056.19V Citroën Jumper, Fiat Ducato, Peugeot Boxer 2006 122 30 057.19V Fiat Doblo, Opel Combo 2010 122 30 017.19V Ford Transit Connect -2013 122 30 010.19V Nissan Primastar, Opel Vivaro, Renault Trafic 2014 122 30 006.19V Nissan NV 200 2009 122 30 015.19V Nissan NV 400, Opel Movano, Renault Master 2010 122 30 013.19V Mercedes-Benz Vito 2014 122 30 055.19V Mercedes-Benz Sprinter, Volkswagen Crafter 2006 122 30 004.19V Volkswagen Caddy, Volkswagen Caddy Maxi 2014 122 30 033.19V Volkswagen T6 2014 122 30 005.19V 132 www.bott.ie

bott vario Ladungssicherung bott vario Load-restraint bulkhead for securing loads in vehicles without a factory fitted bulkhead bott vario 133

bott vario Load-restraint bulkhead Load-restraint bulkhead For securing loads in vehicles without a factory fitted bulkhead Secured with two included ratchet straps with hooks The load-restraint bulkhead can be width-adjusted depending on the vehicle type Incl. anti-slip mat optional load-securing net made of strap W 1440 x D 1300 mm Load capacity up to 300 dan 4x hook, 4x cam buckle Adjustable for every vehicle type Description Load-restraint bulkhead 940-1600 x 500 x 900 630 03 057.98V Load-securing net 626 27 014.19 134 www.bott.ie

bott vario Load restraint perfo panel for vehicle bulkhead Creates an even, vertical surface on the vehicle bulkhead Powder coated steel Colour: anthracite grey (RAL 7016) Perforated for attaching hooks and accessories from the standard perfo accessory range Image shows panel and various accessories (accessories are not included) 1025 x 25 x 900 635 02 011.19V Adaptor rail for perfo panel -specific fixing kits for attaching the perfo panel to the vehicle bulkhead. W 1450 x D 40 x H 42 mm Powder coated steel Colour: anthracite grey (RAL 7016) bott vario For vehicle type Build year Ford Transit Custom from 2013 635 02 044.19V Volkswagen T6 from 2015 635 02 013.19V Iveco Daily from 2014 635 02 014.19V Opel Vivaro, Renault Trafic, Nissan Primastar from 2002 635 02 015.19V Mercedes-Benz Sprinter, Volkswagen Crafter, Hyundai H350 from 2006 635 02 016.19V Citroën Jumpy, Fiat Scudo, Peugeot Expert, Toyota Proace from 2007 635 02 017.19V Citroën Jumper, Fiat Ducato, Peugeot Boxer from 2006 635 02 018.19V Nissan NV200 from 2010 635 02 025.19V 135

bott vario Load restraint Load-securing pad with holder For positioning beneath loaded goods Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Optionally available with anodised aluminium storage pocket (160 x 45 x 160 mm) Pack quantity 6 Version Quantity Pad 152 x 152 x 4.5 incl. holder 6 613 02 006.19V 152 x 152 x 4.5 6 613 02 007.19V Strap protection pads and holder Protect loaded goods from strap abrasion Feed mats onto securing straps using the holes provided Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Optionally available with anodised aluminium storage pocket (160 x 45 x 160 mm) Pack quantity 6 Version Quantity Pad 152 x 152 x 4.5 incl. holder 6 613 02 009.19V 152 x 152 x 4.5 6 613 02 010.19V 136 www.bott.ie

bott vario Load restraint Load-securing mat with holder For supporting loaded goods Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Includes holder (114 x 114 x 500 mm) Version 620 x 820 x 4.5 incl. holder 613 02 001.19V 620 x 820 x 4.5 613 02 002.19V 1220 x 820 x 4.5 incl. holder 613 02 003.19V 1220 x 820 x 4.5 613 02 004.19V Lashing rails with anti-abrasion strips Contact surface with anti-abrasion strips, ideal for cargo with sensitive surfaces For straps with fitting Width 40 mm strap attachment points every 25 mm Load capacity up to 500 dan Includes end caps bott vario Rail length mm 1000 679 01 014.98V 1500 679 01 015.98V 2000 679 01 016.98V 3000 679 01 017.98V per metre* 679 01 018.98V *available in a 25 mm increments / max length 3000 mm 137

bott vario Load restraint Lashing rail - surface mounted For straps with fitting Width 65 mm Strap attachment points every 25 mm Protective end-cap (optional) Load capacity up to 500 dan Rail length mm 1000 679 01 001.98V 1500 679 01 002.98V 2000 679 01 003.98V 3000 679 01 004.98V per metre 679 01 005.98V End-cap 850 01 075.90 *available in a 25 mm increments / max length 3000 mm Semi-circular lashing rail - surface mounted For straps with fitting Width 50 mm Strap attachment points every 25 mm Protective end-cap (optional) Load capacity up to 500 dan Rail length mm 1000 679 01 008.98V 1500 679 01 009.98V 2000 679 01 010.98V 3000 679 01 011.98V per metre 679 01 012.98V End-cap 850 01 010 * available in a 25 mm increments / max. length 3000 mm 138 www.bott.ie

bott vario Load restraint Load-securing case for vehicles with lashing rails Ideal for vehicles with bott in-vehicle equipment including lashing components and/or lashing rails. The use of lashing straps with fittings allows cargo to be secured in a fast and reliable way by means of the lashing points or lashing rails of the vehicle. Set consisting of: 2x lashing strap, 3.5 m with cam buckle 2x lashing strap 3.5 m with fitting and ratchet 6x load-securing pad 6x edge protection pad includes important information about load restraint 454 x 318 x 88 625 11 146.19V Load-securing case for vehicles with lashing eyes and lashing rails Ideal for vehicles with bott in-vehicle equipment including lashing components and/or lashing rails. The use of lashing straps with fittings allows cargo to be secured in a fast and reliable way by means of the lashing points or lashing rails of the vehicle. Set consisting of: 2x lashing strap, 3.5 m with flat hook ends and clip 2x lashing strap 5 m with hook and ratchet 4x individual fitting 6x load-protection pad 6x edge protection pad includes important information about load restraint bott vario 454 x 318 x 88 625 11 147.19V 139

bott vario Load restraint Lashing rail with anti-abrasion strips and lashing strap with automatic winder Contact surface with anti-abrasion strips, ideal for cargo with sensitive surfaces Incl. lashing strap with automatic winder for screwing onto the lashing rail For quick and easy load restraint Rail length 1000 mm Strap length 2000 mm Load capacity up to 125 dan 679 01 019.98V Lashing strap with automatic winder For quick and easy load restraint Version with fittings without fixed ends, to be bolted onto in-vehicle equipment Branded strap in black Strap width 25 mm Strap length 2000 mm Load capacity up to 125 dan Version Fixed end mm Hook - ratchet 200 626 26 062.90 Fitting - ratchet, to be bolted 626 26 061.90 Fitting - Fitting 200 626 26 065.90 140 www.bott.ie

bott vario Load restraint Ratchet strap with fitting bott branded strap in anthracite grey Suitable for lashing rails Strap width 25 mm Load capacity 120 dan Strap length mm Fixed end mm Load capacity dan 1000 130 200 626 26 005.19V 2500 130 200 626 26 006.19V 3000 130 120 626 26 069.19V 2500 500 200 626 26 049.19V 3500 500 200 626 26 007.19V 5000 500 200 626 26 008.19V Ratchet strap with fitting and cam buckle bott branded strap in anthracite grey Suitable for lashing rails Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm Load capacity dan 1000 130 150 626 26 009.19V 2500 130 150 626 26 010.19V 2500 500 150 626 26 050.19V 3500 500 150 626 26 011.19V 5000 500 150 626 26 012.19V 141

bott vario Load restraint Threaded fitting with star-shaped handle grip Suitable for lashing rails Clamping capacity 0-29 mm Load capacity up to 500 dan M8 thread 45 x 25 x 50 630 03 028.51V Threaded fitting A B Suitable for lashing rails Load capacity up to 500 dan M8 thread Pack quantity: 2 pieces Pack quantity 2 Illust. Clamping capacity mm A 43 x 22 x 25 0-6 630 03 092.51V B 43 x 22 x 40 0-21 630 03 027.51V 142 www.bott.ie

bott vario Load restraint Aluminium lashing plate For straps with fitting Load capacity up to 500 dan Diameter x H mm 45 x 10 126 26 021 Individual fitting without strap Suitable for use with lashing rails / lashing plate Load capacity up to 500 dan bott vario Colour 43 x 26 x 65 green 630 03 031.51V Design for bott vario in-vehicle equipment manufactured until 30/06/2011 45 x 25 x 65 grey 630 03 047.51V 143

bott vario Load restraint Bar-type lashing rail Designed for use with flat-hook-ended straps Aluminium Securing bars on a 100 mm increments Protective strip on leading edges to prevent abrasion of secured goods Load capacity up to 400 dan Rail length mm 3000 079 01 006 per metre 079 01 022 *available in 100 mm increments, min. length 200 mm / max. length 3000 mm Cam buckle strap bott branded strap in anthracite grey Strap width 25 mm Load capacity up to 300 dan Strap length mm 1000 626 26 037.19V 2500 626 26 039.19V 144 www.bott.ie

bott vario Load restraint Ratchet strap with flat hook ends bott branded strap in anthracite grey For use with bar-type lashing rail Strap width 25 mm Load capacity up to 650 dan Strap length mm Fixed end mm 2500 250 626 26 021.19V 3500 500 626 26 022.19V 5000 500 626 26 023.19V Cam buckle strap with flat hook ends bott branded strap in anthracite grey For use with bar-type lashing rail Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm 2500 250 626 26 024.19V 3500 500 626 26 025.19V 5000 500 626 26 026.19V 145

bott vario Load restraint Securing rails For straps with clip ends Aluminium Strap attachment points every 50 mm Load capacity up to 400 dan Rail length mm 1000 080 16 023 1500 080 16 025 2000 080 16 026 3000 080 16 018 per metre 080 16 086 *available in a 50 mm increments / max length 3000 mm Ratchet strap with clip bott branded strap in anthracite grey For securing rails Strap width 50 mm Load capacity up to 600 dan Strap length mm Fixed end mm 1000 130 626 26 001.19V 5000 500 626 26 002.19V 146 www.bott.ie

bott vario Load restraint Abrasion protection strip in an aluminium retaining channel Aluminium channel with rubber profile insert Rail length mm 1000 079 01 031 1500 079 01 009 2000 079 01 010 3000 079 01 011 per metre 079 01 016 * max. length 3000 mm Cam buckle strap with mounting plates bott branded strap in anthracite grey Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm 2500 200 626 26 035.19V 147

bott vario Load restraint 148 www.bott.ie

bott vario Load restraint Lashing eye Sheet steel, galvanised Flush-fitting Fixings included Load capacity up to dan 104 x 70 x 12 350 630 03 033.51V 145 x 100 x 17 800 630 03 034.51V Lashing eye Galvanised steel with plastic base Fixings included Load capacity up to 200 dan bott vario Diameter mm 100 630 03 037.51V 149

bott vario Load restraint Ratchet strap with hook end bott branded strap in anthracite grey Universal hook for use with lashing eyes Strap width 25 mm load capacity 400 dan Strap length mm Fixed end mm Load capacity up to dan 3000 130 400 626 26 067.19V 5000 500 650 626 26 033.19V Cam-buckle strap with plastic hooks bott branded strap in anthracite grey Suitable for perfo panels or components with perfo perforation Load capacity up to 100 dan Strap length mm Fixed end mm 2500 500 626 26 043.19V 150 www.bott.ie

bott vario Load restraint Load restraint blanket For securing the load in the vehicle and on the flatbed Anti-theft protection thanks to the opaque fabric Tested according to VDI 2700 Load capacity up to 200 dan Colour: anthracite grey plus Delivery incl. perfo panel and hook kit Version W x D mm 4x cam buckle strap with flat hook ends 1250 x 730 626 27 010.19V 4x cam buckle strap with fitting 1250 x 730 626 27 011.19V 6x cam buckle strap with flat hook ends plusproduct 2290 x 1500 626 27 012.19V 6x cam buckle strap with fitting 2290 x 1500 626 27 013.19V Load-securing net Close-meshed knitted load-securing net Tested according to VDI 2700 Mesh width 45 x 45 mm Load capacity up to 400 dan Cam buckle strap around circumference bott vario Version W x D mm 4x hook 1250 x 730 626 27 006.19V 4x fitting 1250 x 730 626 27 007.19V 4x hook 2290 x 1500 626 27 008.19V 4x fitting 2290 x 1500 626 27 009.19V 151

bott vario Load restraint Load-restraint net made from webbing Load-securing net made from bott strap webbing in anthracite grey Tested according to VDI 2700 Mesh width 150 x 150 mm Load capacity up to 800 dan Ratchet strap around circumference Version W x D mm 4x hook 3000 x 1900 626 27 005.19V 152 www.bott.ie

bott vario Load restraint Long-item tube holder Holder for storing long parts Pipe brackets The clamping range of the holder can be set individually using the included lashing strap and the holder roll. Cone for locating base tube for fixing standing tube in place Cone Ø 55 mm suitable for C steel tubes Cone Ø 75 mm suitable for B steel tubes Version Clamping range mm W x H mm Holder 10 110 125 x 45 630 03 090.51V Cone - 55 x 41 630 03 075.90V Cone - 75 x 41 630 03 076.90V Snap fastener bott vario Version Max. clamping range mm Short rubber strap 25 630 03 041.51V Long rubber strap 50 630 03 042.51V 153

bott vario Load restraint Ladder holder, 3-part 3-part, for single and double ladders For attaching to roof spar in the vehicle by means of a central folding mechanism Colour: anthracite grey (RAL 7016) Suitable for use with ladder spars from - to mm 70-100 630 03 083.19V 130-160 630 03 084.19V 154 www.bott.ie

bott vario Load restraint Box shelves with bottboxes Aluminium box shelf Incl. bottboxes 1-2-90 Max. load capacity 30 kg type Quantity bottboxes Ford Transit 2014 L2/H2/H3 1290 x 234 x 90 9 625 33 280.19V Mercedes-Benz L2/H1/H2 / VW Crafter L2/H2/H3 1590 x 234 x 90 12 625 33 276.19V Renault Master L2/H2 / Nissan NV 400 L2/H2 / Opel Movano L2/H2 1450 x 234 x 90 10 625 33 278.19V Fiat Ducato L2/HH2 / Peugeot Boxer L2/H2 / Citroen Jumper L2/H2 1500 x 234 x 90 11 625 33 279.19V Fiat Ducato L2/HH2 / Peugeot Boxer L2/H2 / Citroen Jumper L2/H2 1500 x 234 x 90 11 625 33 382.19V Clamping bar holder set For securely storing 2 or 4 clamping bars while economising space Suitable for both versions of the clamping bars For mounting onto the lashing rails on the vehicle side wall or in the roof area Powder coated steel Colour: anthracite grey (RAL 7016) bott vario Version for 2 clamping bars 85 x 75 x 120 630 03 086.19 for 4 clamping bars 85 x 75 x 270 630 03 087.19 155

bott vario Load restraint Height-adjustable clamping bars Used to secure large items in transit Telescopic bar can be shortened or extended easily without tools 4 different sizes available, each with a different adjustment range Guide value: Blocking capacity BC x 4 = max. perm. load weight for rear load restraint Clamping bar length mm Blocking capacity BC dan 650-900 300 850 01 041 1050-1550 300 850 01 039 1550-2050 300 850 01 013 2000-2500 160 850 01 040 Height-adjustable clamping bars plus Used to secure large items in transit Telescopic bar can be shortened or extended easily without tools Simple operation with Click Lock when inserting. No axial preload force is necessary for clamping bar installation to ensure that there is no clamping pressure in the roof or the side wall For horizontal and vertical use Smooth contact surface over the entire length Continuous, uniform diameter of the clamping bar that always ensures flat contact surface with cargo Circumferential rubber coating for increased slip-resistance as well as additional protection for the load. Ø x H mm Blocking capacity BC dan 47 x 650-800 450-300 850 01 118 47 x 800-1000 450-300 850 01 119 47 x 1000-1400 350-250 850 01 120 47 x 1400-2050 300-150 850 01 121 47 x 1700-2500 300-100 850 01 122 156 www.bott.ie

bott vario Load restraint Shovel and tool holder for the rear doors For holding multiple shovels or brooms Rear wall with perfo perforation Anodised aluminium Shovels fixed in place using 10 perfo hooks and 2 rubber straps Includes 2 height-adjustable mounting profiles for mounting the shovel holder to the vehicle door (only included with high-roof versions) Can be used for light parts such as aluminium ladders, brooms, shovels and other tools 500 x 240 x 1500 mm 635 02 048.97V Handle For safe entry into the vehicle For mounting in the sliding or rear door area Hole spacing 408 mm Colour: yellow-green (RAL 6018) anthracite grey (RAL 7016) bott vario Version yellow-green 40 x 75 x 435 807 01 007.17 157

bott vario Load restraint 158 www.bott.ie

bott vario Load restraint Holder for plate compactor For secure transportation of plate compactors in vans or on a flatbed Will accomodate a plate size of WxD: 280 x 330-350mm Handle height is adjustable Incl. lashing strap 315 x 560 x 930 070 02 234.19 bott vario 159

bott vario Load restraint Clamping unit Convenient, safe clamping of different case sizes For assembly between endframes Clamping with cam lever Load can be clamped to left or right Suitable for all system depths 775 x 302 x 228 670 02 039.19V 1025 x 302 x 228 670 02 040.19V 1275 x 302 x 228 670 02 041.19V 1525 x 302 x 228 670 02 056.19V Hose holder Die-cast aluminium Fixings included 190 x 70 x 150 140 50 001 270 x 110 x 200 140 50 002 350 x 140 x 260 140 50 003 420 x 190 x 310 140 50 004 160 www.bott.ie

bott vario In practice bott vario 161

bott vario Reference examples for accessories 162 www.bott.ie

bott vario In practice bott vario 163

bott vario Reference examples for accessories Accessories to suit every requirement bott vario offers many more accessories for vehicles and van racking than can be shown in this catalogue. decals, rear steps, roof racks, ramps, flashing beacons, telecommunications components, as well as complete stand-alone packages are only a few examples of the items offered by bott service partners to complement your in-vehicle equipment. 164 www.bott.ie

bott vario Roof Rack Systems light, stable and safe for maximum storage space on vehicle roofs aerodynamic bott vario 165

bott vario Roof rack systems Simple roof rack systems Lightweight and sturdy roof rack system is made of weather-resistant anodized aluminium Lockable roof bar feet With 2 to 4 roof bars (depending on the vehicle) Ladder lift For fast, simple and secure loading and unloading of carried ladders Minimized physical stress and reduced risk of injury by providing support using adjustable gas struts during loading and unloading of ladders 3 versions for single, two-piece and extra-wide ladders Accessories Rear door ladder Rear ladder lift Aluminium ladder holder kit Ladder clamps Aluminium storage tube for long items 166 www.bott.ie

bott vario Roof rack systems and accessories Roof bar Lightweight and sturdy roof rack system is made of weatherresistant anodized aluminium Lockable roof bar feet With 2 to 4 roof bars (depending on the vehicle) Aerodynamic shape of individual components minimizes air resistance and wind noise Includes 2 pairs of load stops Load capacity: 75 kg per roof bar (maximum roof load is dependent upon the respective manufacturer specifications) Expandable with extensive accessories Rear loading roller fits to roof bar For fast, safe and easy loading and unloading of ladders and other cargo onto the roof rack Protects roof edge of the vehicle from damage Variably adjustable in depth Made from high quality stainless steel Maximum load capacity: 75 kg bott vario 167

bott vario Roof rack systems and accessories Roof racks for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Berlingo 2008 2728 All H1 All 2x load carrier 350 01 005 Berlingo 2008 2728 All H1 All 3x load carrier 350 01 006 Jumpy 2007 3000/3122 All H1 All 2x load carrier 350 01 011 Jumpy 2007 3000/3122 All H1 All 3x load carrier 350 01 012 Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier 350 01 017 Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier 350 01 018 Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier 350 01 019 Rear loading rollers for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Berlingo 2008 2728 L1 H1 Double doors 350 02 024 Berlingo 2008 2728 L2 H1 Double doors 350 02 030 Jumpy 2007 3000/3122 All H1 Double doors 350 02 030 Jumpy 2007 3000/3122 All H1 Tailgate 350 02 024 Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 350 02 028 Roof racks for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Doblo 2010 2755/3105 All H1 All 2x load carrier 350 01 001 Doblo 2010 2755/3105 All H1 All 3x load carrier 350 01 002 Scudo 2007 3000/3122 All H1 All 2x load carrier 350 01 011 Scudo 2007 3000/3122 All H1 All 3x load carrier 350 01 012 Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier 350 01 017 Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier 350 01 018 Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier 350 01 019 Rear loading rollers for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Doblo 2010 2755/3105 All H1 Double doors 350 02 024 Scudo 2007 3000/3122 All H1 Double doors 350 02 030 Scudo 2007 3000/3122 All H1 Tailgate 350 02 024 Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 350 02 028 168 www.bott.ie

bott vario Roof rack systems and accessories Roof racks for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Transit Connect 2014 2662/3062 All H1 All 2x load carrier 350 01 063 Transit Connect 2014 3062 L2 H1 All 3x load carrier 350 01 064 Transit Connect 2014 2662 L1 H1 All 4x load carrier 350 01 065 Transit Custom 2012 2933/3300 All H1 All 2x load carrier 350 01 031 Transit Custom 2012 2933/3300 All H1 All 3x load carrier 350 01 032 Transit Custom 2012 2933/3300 All H2 All 2x load carrier 350 01 033* Transit Custom 2012 2933/3300 All H2 All 3x load carrier 350 01 034* Transit 2014 3300/3750/3750L All H2/H3 Double doors 2x load carrier 350 01 068 Transit 2014 3300/3750/3750L All H2/H3 Double doors 3x load carrier 350 01 069 Transit 2014 3750/3750L L3, L4 H2/H3 Double doors 4x load carrier 350 01 070 * When mounting a roof carrier for the vehicle height, H2 must be drilled. Maximum weight limit is 75 kg Rear loading rollers for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Transit Connect 2014 2662/3062 All H1 Double doors 350 02 024 Transit Costum 2012 2933/3300 All H1 Double doors 350 02 027 Transit Costum 2012 2933/3300 All H2 Double doors 350 02 029 Transit 2014 3300/3750 L2,L3 H2/H3 Double doors 350 02 032 Roof racks for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Version Citan 2012 2313/2697/3081 All H1 All 2x load carrier 350 01 026 Citan 2012 3081 L3 H1 All 3x load carrier 350 01 027 Vito 2014 3200/3200L/3430 All H1 All 2x load carrier 350 01 088 Vito 2014 3200/3200L/3430 All H1 All 4x load carrier 350 01 089 Sprinter 2006 3250/3665 L1,L2 H1 Double doors 2x load carrier 350 01 041* Sprinter 2006 3250/3665 L1,L2 H1 Double doors 3x load carrier 350 01 042* Sprinter 2006 3665 L2 H1 Double doors 4x load carrier 350 01 043* Sprinter 2006 3250/3665/4325/4325L All H2 Double doors 2x load carrier 350 01 044* Sprinter 2006 3250/3665/4325/4325L All H2 Double doors 3x load carrier 350 01 045* Sprinter 2006 3665/4325/4325L L2,L3,L4 H2 Double doors 4x load carrier 350 01 046* * Base load carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras bott vario Rear loading rollers for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Citan 2012 2313/2697/3081 All H1 Double doors 350 02 024 Vito 2014 3430 L3 H1 Tailgate 350 02 025* Vito 2014 3200/3200L L1,L2 H1 Double doors 350 02 025 Vito 2014 3430 L3 H1 Double doors 350 02 031 Sprinter 2006 3250/3665 L1,L2 H1 Double doors 350 02 033 Sprinter 2006 3665/4325/4325L L2,L3,L4 H2 Double doors 350 02 032 * Loading rollers are only possible with 4 load carriers 169

bott vario Roof rack systems and accessories Roof racks for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version NV200 2009 2725 L1 H1 All 2x load carrier 350 01 053 NV200 2009 2725 L1 H1 All 3x load carrier 350 01 027 NV400 2010 3182/3682/4332 All H1,H2 Double doors 2x load carrier 350 01 056* NV400 2010 3182/3682/4332 All H1,H2 Double doors 3x load carrier 350 01 057* NV400 2010 3182/3682/4332 All H1,H2 Double doors 4x load carrier 350 01 058* * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available Rear loading rollers for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle NV200 2009 2725 All H1 Double doors 350 02 026 NV400 2010 3182/3682/4332 All H1,H2,H3 Double doors 350 02 026 Roof racks for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Combo 2010 2755/3105 All H1 All 2x load carrier 350 01 001 Combo 2010 2755/3105 All H1 All 3x load carrier 350 01 002 Vivaro 2014 3098/3498 All H1 All 2x load carrier 350 01 076 Vivaro 2014 3098/3498 All H1 All 3x load carrier 350 01 077 Vivaro 2014 3098/3498 All H1 All 4x load carrier 350 01 078 Vivaro 2014 3098/3498 All H2 All 2x load carrier 350 01 079 Vivaro 2014 3098/3498 All H2 All 3x load carrier 350 01 080 Vivaro 2014 3098/3498 All H2 All 4x load carrier 350 01 081 Movano 2010 3182/3682/4332 All H1,H2 Double doors 2x load carrier 350 01 056* Movano 2010 3182/3682/4332 All H1,H2 Double doors 3x load carrier 350 01 057* Movano 2010 3182/3682/4332 All H1,H2 Double doors 4x load carrier 350 01 058* * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available Rear loading rollers for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Combo 2010 2755/3105 All H1 Double doors 350 02 024 Vivaro 2014 3098/3498 All H1 Double doors 350 02 028 Vivaro 2014 3098/3498 All H1 Tailgate 350 02 025 Vivaro 2014 3098/3498 All H2 Double doors 350 02 026 Movano 2010 3182/3682/4332 All H1,H2,H3 Double doors 350 02 026 170 www.bott.ie

bott vario Roof rack systems and accessories Roof racks for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Partner 2008 2728 All H1 All 2x load carrier 350 01 005 Partner 2008 2728 All H1 All 3x load carrier 350 01 006 Expert 2007 3000/3122 All H1 All 2x load carrier 350 01 011 Expert 2007 3000/3122 All H1 All 3x load carrier 350 01 012 Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier 350 01 017 Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier 350 01 018 Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier 350 01 019 Rear loading rollers for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Partner 2008 2728 L1 H1 Double doors 350 02 024 Partner 2008 2728 L2 H1 Double doors 350 02 030 Expert 2007 3000/3122 All H1 Double doors 350 02 030 Expert 2007 3000/3122 All H1 Tailgate 350 02 024 Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 350 02 028 Roof racks for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Kangoo 2008 2313/2697/3081 All H1 All 2x load carrier 350 01 026 Kangoo 2008 3081 L3 H1 All 3x load carrier 350 01 027 Trafic 2015 3098/3498 All H1 All 2x load carrier 350 01 076 Trafic 2015 3098/3498 All H1 All 3x load carrier 350 01 077 Trafic 2015 3098/3498 All H1 All 4x load carrier 350 01 078 Trafic 2015 3098/3498 All H2 All 2x load carrier 350 01 079 Trafic 2015 3098/3498 All H2 All 3x load carrier 350 01 080 Trafic 2015 3098/3498 All H2 All 4x load carrier 350 01 081 Master 2010 3182/3682/4332 All H1,H2 Double doors 2x load carrier 350 01 056* Master 2010 3182/3682/4332 All H1,H2 Double doors 3x load carrier 350 01 057* Master 2010 3182/3682/4332 All H1,H2 Double doors 4x load carrier 350 01 058* * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available bott vario Rear loading rollers for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Kangoo 2008 2313/2697/3081 All H1 Double doors 350 02 024 Trafic 2015 3098/3498 All H1 Double doors 350 02 028 Trafic 2015 3098/3498 All H1 Tailgate 350 02 025 Trafic 2015 3098/3498 All H2 Double doors 350 02 026 Master 2010 3182/3682/4332 All H1,H2,H3 Double doors 350 02 026 171

bott vario Roof rack systems and accessories Roof racks for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Proace 2013 3000/3122 All H1 All 2x load carrier 350 01 011 Proace 2013 3000/3122 All H1 All 3x load carrier 350 01 012 Rear loading rollers for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Proace 2013 3000/3122 All H1 Double doors 350 02 030 Proace 2013 3000/3122 All H1 Tailgate 350 02 024 Roof racks for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Version Caddy 2015 2682/3000 All H1 All 2x load carrier 350 01 053 Caddy 2015 2682 L1 H1 All 3x load carrier 350 01 103 Caddy Maxi 2015 3000 L2 H1 All 4x load carrier 350 01 104 T6 2015 3000/3400 All H1 All 2x load carrier 350 01 096 T6 2015 3000/3400 All H1 All 4x load carrier 350 01 097 Crafter 2006 3250/3665 L1,L2 H1 Double doors 2x load carrier 350 01 041* Crafter 2006 3250/3665 L1,L2 H1 Double doors 3x load carrier 350 01 042* Crafter 2006 3665 L2 H1 Double doors 4x load carrier 350 01 043* Crafter 2006 3250/3665/4325/4325L All H2 Double doors 2x load carrier 350 01 044* Crafter 2006 3250/3665/4325/4325L All H2 Double doors 3x load carrier 350 01 045* Crafter 2006 3665/4325/4325L L2,L3,L4 H2 Double doors 4x load carrier 350 01 046* Rear loading rollers for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Caddy / Caddy Maxi 2015 2682/3000 All H1 Double doors 350 02 023 T6 2015 3000/3400 All H1 Tailgate 350 02 025 T6 2015 3000/3400 All H1 Double doors 350 02 031 Crafter 2006 3250/3665 L1,L2 H1 Double doors 350 02 033 Crafter 2006 325073665/4325/4325L All H2 Double doors 350 02 032 172 www.bott.ie

bott vario More accessories for roof rack systems Aluminium ladder holder kit To secure ladders on vehicles with low roofs Comfortable operation from the floor Easy reloading with low-friction slides Height and width for ladders of different sizes and types are adjustable (height - 120-220mm, width - 350-500mm) Suitable for up to three-piece ladders Secured on the rear of the roof rack with multiple adjustable lashing straps 350 02 019 Ladder clamps Patented clamping system for fast and safe handling Lockable Suitable for up to four-piece ladders With corrosion-resistant stainless steel anchor hook Pack quantity 2 bott vario 350 02 020 Aluminium storage tube for long items For transport of pipes and other long cargo items Minimal air resistance thanks to an aerodynamic plastic front cap Lockable and puncture-resistant steel insert for both ends Made of powder coated aluminium Maximum load capacity: 50 kg Version for pipes up to 2 m Version for pipes up to 3 m 350 02 021 350 02 022 173

bott vario Basket carrier systems Basket carriers Lightweight and sturdy roof rack system is made of weatherresistant anodized aluminium Aerodynamic shape of individual components minimizes air resistance and wind noise With stainless steel loading rollers for fast, safe and easy loading and unloading of ladders and other cargo onto the basket carrier Expandable with extensive accessories Basket carrier for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Berlingo 2008 2728 L1 H1 Double doors 1.25 x 2.4 m basket carrier 350 01 007 Berlingo 2008 2728 L1 H1 Tailgate 1.25 x 2.2 m basket carrier 350 01 008 Berlingo 2008 2728 L2 H1 Double doors 1.25 x 2.6 m basket carrier 350 01 009 Berlingo 2008 2728 L2 H1 Tailgate 1.25 x 2.4 m basket carrier 350 01 010 Jumpy 2007 3000 L1 H1 Double doors 1.40 x 2.6 m basket carrier 350 01 013 Jumpy 2007 3000 L1 H1 Tailgate 1.40 x 2.4 m basket carrier 350 01 014 Jumpy 2007 3122 L2 H1 Double doors 1.40 x 2.8 m basket carrier 350 01 015 Jumpy 2007 3122 L2 H1 Tailgate 1.40 x 2.6 m basket carrier 350 01 016 Jumper 2006 3000 L1 H1 Double doors 1.80 x 3.2 m basket carrier 350 01 020 Jumper 2006 3450 L2 H1 Double doors 1.80 x 3.4 m basket carrier 350 01 021 Jumper 2006 3450 L2 H2 Double doors 1.80 x 3.2 m basket carrier 350 01 022 Jumper 2006 4035 L3 H2 Double doors 1.80 x 3,8 m basket carrier 350 01 023 Jumper 2006 4035L L4 H2 Double doors 1.80 x 4.2 m basket carrier 350 01 024 Jumper 2006 4035L L4 H3 Double doors 1.60 x 4.2 m basket carrier 350 01 025 Basket carrier for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Doblo 2010 2755 L1 H1 Double doors 1.25 x 2.0 m basket carrier 350 01 003 Doblo 2010 3105 L2 H1 Double doors 1.25 x 2.4 m basket carrier 350 01 004 Scudo 2007 3000 L1 H1 Double doors 1.40 x 2.6 m basket carrier 350 01 013 Scudo 2007 3000 L1 H1 Tailgate 1.40 x 2.4 m basket carrier 350 01 014 Scudo 2007 3122 L2 H1 Double doors 1.40 x 2.8 m basket carrier 350 01 015 Scudo 2007 3122 L2 H1 Tailgate 1.40 x 2.6 m basket carrier 350 01 016 Ducato 2006 3000 L1 H1 Double doors 1.80 x 3.2 m basket carrier 350 01 020 Ducato 2006 3450 L2 H1 Double doors 1.80 x 3.4 m basket carrier 350 01 021 Ducato 2006 3450 L2 H2 Double doors 1.80 x 3.2 m basket carrier 350 01 022 Ducato 2006 4035 L4 H2 Double doors 1.80 x 3.8 m basket carrier 350 01 023 Ducato 2006 4035L L5 H2 Double doors 1.80 x 4.2 m basket carrier 350 01 024 Ducato 2006 4035L L5 H3 Double doors 1.60 x 4.2 m basket carrier 350 01 025 174 www.bott.ie

bott vario Basket carrier systems Basket carrier for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Transit Connect 2014 2662 L1 H1 Double doors 1.25 x 2.0 m basket carrier 350 01 066 Transit Connect 2014 3062 L2 H1 Double doors 1.25 x 2.4 m basket carrier 350 01 067 Transit Custom 2012 2933 L1 H1 Double doors 1.40 x 3.2 m basket carrier 350 01 035 Transit Custom 2012 2933 L1 H1 Tailgate 1.40 x 3.0 m basket carrier 350 01 036 Transit Custom 2012 3300 L2 H1 Double doors 1.40 x 3.6 m basket carrier 350 01 037 Transit Custom 2012 3300 L2 H1 Tailgate 1.40 x 3.4 m basket carrier 350 01 038 Transit Custom 2012 2933 L1 H2 Double doors 1.25 x 2.2 m basket carrier 350 01 039* Transit Custom 2012 3300 L2 H2 Double doors 1.25 x 2.6 m basket carrier 350 01 040* Transit 2014 3300 L2 H2 Double doors 1.60 x 3.0 m basket carrier 350 01 071 Transit 2014 3750 L3 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 073 Transit 2014 3750 L3 H3 Double doors 1.60 x 3.2 m basket carrier 350 01 074 Transit 2014 3750L L4 H3 Double doors 1.60 x 4.0 m basket carrier 350 01 075 Transit 2014 3300 L2 H3 Double doors 1.60 x 2.8 m basket carrier 350 01 072 * When mounting a roof carrier for the vehicle height, H2 must be drilled. Maximum weight limit is 75 kg Basket carrier for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Version Citan 2012 2313 L1 H1 Double doors 1.25 x 2.0 m basket carrier 350 01 028 Citan 2012 2697 L2 H1 Double doors 1.25 x 2.2 m basket carrier 350 01 029 Citan 2012 3081 L3 H1 Double doors 1.25 x 2.6 m basket carrier 350 01 030 Vito 2014 3200 L1 H1 Double doors 1.40 x 3.0 m basket carrier 350 01 090 Vito 2014 3200 L1 H1 Tailgate 1.40 x 2.8 m basket carrier 350 01 091 Vito 2014 3200L L2 H1 Double doors 1.40 x 3.2 m basket carrier 350 01 092 Vito 2014 3200L L2 H1 Tailgate 1.40 x 3.0 m basket carrier 350 01 093 Vito 2014 3430 L3 H1 Double doors 1.40 x 3.4 m basket carrier 350 01 094 Vito 2014 3430 L3 H1 Tailgate 1.40 x 3.2 m basket carrier 350 01 095 Sprinter 2006 3250 L1 H1 Double doors 1.60 x 3.2 m basket carrier 350 01 047* Sprinter 2006 3250 L1 H2 Double doors 1.60 x 2.8 m basket carrier 350 01 048* Sprinter 2006 3665 L2 H1 Double doors 1.60 x 4.0 m basket carrier 350 01 049* Sprinter 2006 3665 L2 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 050* Sprinter 2006 4325 L3 H2 Double doors 1.60 x 4.4 m basket carrier 350 01 051* Sprinter 2006 4325L L4 H2 Double doors 1.60 x 4.8 m basket carrier 350 01 052* * Basket carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras bott vario Basket carrier for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version NV200 2009 2725 L1 H1 Double doors 1.25 x 2.2 m basket carrier 350 01 054 NV200 2009 2725 L1 H1 Tailgate 1.25 x 2.0 m basket carrier 350 01 055 NV400 2010 3182 L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier 350 01 059* NV400 2010 3682 L2 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 060* NV400 2010 4332 FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier 350 01 061* NV400 2010 4332 L4 H2 Double doors 1.60 x 4.4 m basket carrier 350 01 062* * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available 175

bott vario Basket carrier systems Basket carrier for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Combo 2010 2755 L1 H1 Double doors 1.25 x 2.0 m basket carrier 350 01 003 Combo 2010 3105 L2 H1 Double doors 1.25 x 2.4 m basket carrier 350 01 004 Vivaro 2014 3098 L1 H1 Double doors 1.60 x 2.8 m basket carrier 350 01 082 Vivaro 2014 3098 L1 H1 Tailgate 1.60 x 2.6 m basket carrier 350 01 083 Vivaro 2014 3498 L2 H1 Double doors 1.60 x 3.2 m basket carrier 350 01 084 Vivaro 2014 3498 L2 H1 Tailgate 1.60 x 3.0 m basket carrier 350 01 085 Vivaro 2014 3098 L1 H2 Double doors 1.40 x 2.2 m basket carrier 350 01 086 Vivaro 2014 3498 L2 H2 Double doors 1.40 x 2.6 m basket carrier 350 01 087 Movano 2010 3182 L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier 350 01 059* Movano 2010 3682 L2 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 060* Movano 2010 4332 FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier 350 01 061* Movano 2010 4332 L4 H2 Double doors 1.60 x 4.4 m basket carrier 350 01 062* * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available Basket carrier for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Partner 2008 2728 L1 H1 Double doors 1.25 x 2.4 m basket carrier 350 01 007 Partner 2008 2728 L1 H1 Tailgate 1.25 x 2.2 m basket carrier 350 01 008 Partner 2008 2728 L2 H1 Double doors 1.25 x 2.6 m basket carrier 350 01 009 Partner 2008 2728 L2 H1 Tailgate 1.25 x 2.4 m basket carrier 350 01 010 Expert 2007 3000 L1 H1 Double doors 1.40 x 2.6 m basket carrier 350 01 013 Expert 2007 3000 L1 H1 Tailgate 1.40 x 2.4 m basket carrier 350 01 014 Expert 2007 3122 L2 H1 Double doors 1.40 x 2.8 m basket carrier 350 01 015 Expert 2007 3122 L2 H1 Tailgate 1.40 x 2.6 m basket carrier 350 01 016 Boxer 2006 3000 L1 H1 Double doors 1.80 x 3.2 m basket carrier 350 01 020 Boxer 2006 3450 L2 H1 Double doors 1.80 x 3.4 m basket carrier 350 01 021 Boxer 2006 3450 L2 H2 Double doors 1.80 x 3.2 m basket carrier 350 01 022 Boxer 2006 4035 L3 H2 Double doors 1.80 x 3.8 m basket carrier 350 01 023 Boxer 2006 4035L L4 H2 Double doors 1.80 x 4.2 m basket carrier 350 01 024 Boxer 2006 4035L L4 H3 Double doors 1.60 x 4.2 m basket carrier 350 01 025 176 www.bott.ie

bott vario Basket carrier systems Basket carrier for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Kangoo 2008 2313 L1 H1 Double doors 1.25 x 2.0 m basket carrier 350 01 028 Kangoo 2008 2697 L2 H1 Double doors 1.25 x 2.2 m basket carrier 350 01 029 Kangoo 2008 3081 L3 H1 Double doors 1.25 x 2.6 m basket carrier 350 01 030 Trafic 2015 3098 L1 H1 Double doors 1.60 x 2.8 m basket carrier 350 01 082 Trafic 2015 3098 L1 H1 Tailgate 1.60 x 2.6 m basket carrier 350 01 083 Trafic 2015 3498 L2 H1 Double doors 1.60 x 3.2 m basket carrier 350 01 084 Trafic 2015 3498 L2 H1 Tailgate 1.60 x 3.0 m basket carrier 350 01 085 Trafic 2015 3098 L1 H2 Double doors 1.40 x 2.2 m basket carrier 350 01 086 Trafic 2015 3498 L2 H2 Double doors 1.40 x 2.6 m basket carrier 350 01 087 Master 2010 3182 L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier 350 01 059* Master 2010 3682 L2 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 060* Master 2010 4332 FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier 350 01 061* Master 2010 4332 L4 H2 Double doors 1.60 x 4.4 m basket carrier 350 01 062* * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available Basket carrier for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Proace 2013 3000 L1 H1 Double doors 1.40 x 2.6 m basket carrier 350 01 013 Proace 2013 3000 L1 H1 Tailgate 1.40 x 2.4 m basket carrier 350 01 014 Proace 2013 3122 L2 H1 Double doors 1.40 x 2.8 m basket carrier 350 01 015 Proace 2013 3122 L2 H1 Tailgate 1.40 x 2.6 m basket carrier 350 01 016 Basket carrier for Volkswagen bott vario Build year from Wheelbase Length Height Version - rear of the vehicle Version Caddy 2015 2682 L1 H1 Double doors 1.25 x 2.2 m basket carrier 350 01 105 Caddy 2015 2682 L1 H1 Tailgate 1.25 x 2.0 m basket carrier 350 01 106 Caddy 2015 3000 L2 H1 Double doors 1.25 x 2.6 m basket carrier 350 01 107 Caddy 2015 3000 L2 H1 Tailgate 1.25 x 2.4 m basket carrier 350 01 108 T6 2015 3000 L1 H1 Double doors 1.40 x 3.0 m basket carrier 350 01 098 T6 2015 3000 L1 H1 Tailgate 1.40 x 2.8 m basket carrier 350 01 099 T6 2015 3400 L2 H1 Double doors 1.40 x 3.4 m basket carrier 350 01 100 T6 2015 3400 L2 H1 Tailgate 1.40 x 3.2 m basket carrier 350 01 101 Crafter 2006 3250 L1 H1 Double doors 1.60 x 3.2 m basket carrier 350 01 047* Crafter 2006 3250 L1 H2 Double doors 1.60 x 2.8 m basket carrier 350 01 048* Crafter 2006 3665 L2 H1 Double doors 1.60 x 4.0 m basket carrier 350 01 049* Crafter 2006 3665 L2 H2 Double doors 1.60 x 3.4 m basket carrier 350 01 050* Crafter 2006 4325 L3 H2 Double doors 1.60 x 4.4 m basket carrier 350 01 051* Crafter 2006 4325L L4 H2 Double doors 1.60 x 4.8 m basket carrier 350 01 052* * Basket carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras 177

bott vario More accessories for roof rack systems Aluminium ladder holder kit To secure ladders on vehicles with low roofs Comfortable operation from the floor Easy reloading with low-friction slides Height and width for ladders of different sizes and types are adjustable (height - 120-220mm, width - 350-500mm) Suitable for up to three-piece ladders Secured on the rear of the roof rack with multiple adjustable lashing straps 350 02 019 Ladder clamps Patented clamping system for fast and safe handling Lockable Suitable for up to four-piece ladders With corrosion-resistant stainless steel anchor hook Pack quantity 2 350 02 020 Aluminium loading tube for long items For transport of pipes and other long cargo items Minimal air resistance thanks to an aerodynamic plastic front cap Lockable and puncture-resistant steel insert for both ends Made of powder coated aluminium Maximum load capacity: 50 kg Version for pipes up to 2 m Version for pipes up to 3 m 350 02 021 350 02 022 178 www.bott.ie

bott vario Rear ladder lifts Rear ladder lifts for roof rack and basket carrier systems For fast, simple and secure loading and unloading of carried ladders Minimized physical stress and reduced risk of injury by providing support using adjustable gas springs during loading and unloading of ladders 3 versions for single, two-piece and extra-wide ladders Particularly robust aluminium components with stainless steel elements Maximum load capacity: 60 kg Rear ladder lift for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Berlingo 2008 2728 All H1 Double doors 1x ladder 2.2 m 350 02 013* Berlingo 2008 2728 All H1 Double doors 2x ladder 2.2 m 350 02 014* Berlingo 2008 2728 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Jumpy 2007 3000/3122 All H1 Double doors 1x ladder 2.2 m 350 02 013* Jumpy 2007 3000/3122 All H1 Double doors 2x ladder 2.2 m 350 02 014* Jumpy 2007 3000/3122 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Jumpy 2007 3122 L2 H2 Double doors 1x ladder 3.1 m 350 02 016* Jumpy 2007 3122 L2 H2 Double doors 2x ladder 3.1 m 350 02 017* Jumpy 2007 3122 L2 H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018* Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Jumper 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers bott vario Rear ladder lift for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Doblo 2010 2755/3105 All H1 Double doors 1x ladder 2.2 m 350 02 013* Doblo 2010 2755/3105 All H1 Double doors 2x ladder 2.2 m 350 02 014* Doblo 2010 2755/3105 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Scudo 2007 3000/3122 All H1 Double doors 1x ladder 2.2 m 350 02 013* Scudo 2007 3000/3122 All H1 Double doors 2x ladder 2.2 m 350 02 014* Scudo 2007 3000/3122 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Scudo 2007 3122 L2 H2 Double doors 1x ladder 3.1 m 350 02 016* Scudo 2007 3122 L2 H2 Double doors 2x ladder 3.1 m 350 02 017* Scudo 2007 3122 L2 H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018* Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Ducato 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers 179

bott vario Rear ladder lifts 180 www.bott.ie

bott vario Rear ladder lifts Rear ladder lift for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Transit Connect 2014 2662/3062 All H1 Double doors 1x ladder 2.2 m 350 02 013* Transit Connect 2014 2662/3062 All H1 Double doors 2x ladder 2.2 m 350 02 014* Transit Connect 2014 2662/3062 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Transit Custom 2012 2933/3300 All H1/H2 Double doors 1x ladder 3.1 m 350 02 016* Transit Custom 2012 2933/3300 All H1 Double doors 2x ladder 3.1 m 350 02 017* Transit Custom 2012 2933/3300 All H1 Double doors 1x extra-wide ladder 3.1 m 350 02 018* Transit 2014 3300/3750/3750L All H2/H3 Double doors 1x ladder 3.1 m 350 02 016* Transit 2014 3300/3750/3750L All H2/H3 Double doors 2x ladder 3.1 m 350 02 017* Transit 2014 3300/3750/3750L All H2/H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers Rear ladder lift for Mercedes Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Citan 2012 3081 L3 H1 Double doors 1x ladder 2.2 m 350 02 013* Citan 2012 3081 L3 H1 Double doors 2x ladder 2.2 m 350 02 014* Citan 2012 3081 L3 H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Vito 2014 3200/3200L/3430 All H1 Double doors 1x ladder 3.1 m 350 02 016** Vito 2014 3200/3200L/3430 All H1 Double doors 2x ladder 3.1 m 350 02 017** Vito 2014 3200/3200L/3430 All H1 Double doors 1x extra-wide ladder 3.1 m 350 02 018** Sprinter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Sprinter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Sprinter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers ** only available for at least 4 load carriers bott vario Rear ladder lift for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders NV200 2009 2725 L1 H1 Double doors 1x ladder 2.2 m 350 02 013* NV200 2009 2725 L1 H1 Double doors 2x ladder 2.2 m 350 02 014* NV200 2009 2725 L1 H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* NV400 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* NV400 2010 3182/3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* NV400 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers 181

bott vario Rear ladder lifts Rear ladder lift for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Combo 2010 2755/3105 All H1 Double doors 1x ladder 2.2 m 350 02 013* Combo 2010 2755/3105 All H1 Double doors 2x ladder 2.2 m 350 02 014* Combo 2010 2755/3105 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Vivaro 2014 3098/3498 All H1,H2 Double doors 1x ladder 3.1 m 350 02 016** Vivaro 2014 3098/3498 All H1,H2 Double doors 2x ladder 3.1 m 350 02 017** Vivaro 2014 3098/3498 All H1,H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018** Movano 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Movano 2010 3182/3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Movano 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers ** only available for at least 4 load carriers Rear ladder lift for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Partner 2008 2728 All H1 Double doors 1x ladder 2.2 m 350 02 013* Partner 2008 2728 All H1 Double doors 2x ladder 2.2 m 350 02 014* Partner 2008 2728 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Expert 2007 3000/3122 All H1 Double doors 1x ladder 2.2 m 350 02 013* Expert 2007 3000/3122 All H1 Double doors 2x ladder 2.2 m 350 02 014* Expert 2007 3000/3122 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Expert 2007 3122 L2 H2 Double doors 1x ladder 3.1 m 350 02 016* Expert 2007 3122 L2 H2 Double doors 2x ladder 3.1 m 350 02 017* Expert 2007 3122 L2 H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018* Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Boxer 2006 3000/3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers Rear ladder lift for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Kangoo 2008 3081 L3 H1 Double doors 1x ladder 2.2 m 350 02 013* Kangoo 2008 3081 L3 H1 Double doors 2x ladder 2.2 m 350 02 014* Kangoo 2008 3081 L3 H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Trafic 2015 3098/3498 All H1,H2 Double doors 1x ladder 3.1 m 350 02 016** Trafic 2015 3098/3498 All H1,H2 Double doors 2x ladder 3.1 m 350 02 017** Trafic 2015 3098/3498 All H1,H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018** Master 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Master 2010 3182/3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Master 2010 3182/3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers ** only available for at least 4 load carriers 182 www.bott.ie

bott vario Rear ladder lifts Rear ladder lift for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Proace 2013 3000/3122 All H1 Double doors 1x ladder 2.2 m 350 02 013* Proace 2013 3000/3122 All H1 Double doors 2x ladder 2.2 m 350 02 014* Proace 2013 3000/3122 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* Proace 2013 3122 L2 H2 Double doors 1x ladder 3.1 m 350 02 016* Proace 2013 3122 L2 H2 Double doors 2x ladder 3.1 m 350 02 017* Proace 2013 3122 L2 H2 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers Rear ladder lift for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Caddy 2015 2682/3000 All H1 Double doors 1x ladder 2.2 m 350 02 013* Caddy 2015 2682/3000 All H1 Double doors 2x ladder 2.2 m 350 02 014* Caddy 2015 2682/3000 All H1 Double doors 1x extra-wide ladder 2.2 m 350 02 015* T6 2015 3000/3400 All H1 Double doors 1x ladder 3.1 m 350 02 016** T6 2015 3000/3400 All H1 Double doors 2x ladder 3.1 m 350 02 017** T6 2015 3000/3400 All H1 Double doors 1x extra-wide ladder 3.1 m 350 02 018** Crafter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 1x ladder 3.1 m 350 02 016* Crafter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 2x ladder 3.1 m 350 02 017* Crafter 2006 3250/3665/4325/4325L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m 350 02 018* * only available for at least 3 load carriers ** only available for at least 4 load carriers bott vario 183

bott vario Rear door ladder Rear door ladder For mounting on rear doors of vehicles More secure access to vehicle roof is guaranteed with non-slip rungs and ergonomic handrails Load capacity up to max. of 100 kg Optimal grip thanks to vehicle-specific installation kit Galvanised and powder-coated for maximum corrosion resistance Rear door ladder for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Jumpy 2007 3000/3122 All H1 Double doors 350 02 002* Jumpy 2007 3122 L2 H2 Double doors 350 02 006* Jumper 2006 3450/4035 L2, L3 H2 Double doors 350 02 009* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Scudo 2007 3000/3122 All H1 Double doors 350 02 002* Scudo 2007 3122 L2 H2 Double doors 350 02 006* Ducato 2006 3450/4035 L2, L4 H2 Double doors 350 02 009* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Transit Custom 2012 2933/3300 All H1/H2 Double doors 350 02 005* Transit 2014 3300/3750/3750L All H2/H3 Double doors 350 02 010* * Rear door ladder is not suitable for vehicle rear doors with windows 184 www.bott.ie

bott vario Rear door ladder Rear door ladder for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Vito 2014 3200/3200L/3430 All H1 Double doors 350 02 001* Sprinter 2006 3250/3665/4325/4325L All H1 Double doors 350 02 007* Sprinter 2006 3250/3665/4325/4325L All H2 Double doors 350 02 011* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle NV200 2009 2725 L1 H1 Double doors 350 02 001* NV400 2010 3182/3682/4332 All H1 Double doors 350 02 008* NV400 2010 3182/3682/4332 All H2 Double doors 350 02 012* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Vivaro 2014 3098/3498 All H1 Double doors 350 02 003* Vivaro 2014 3098/3498 All H2 Double doors 350 02 006* Movano 2010 3182/3682/4332 All H1 Double doors 350 02 008* Movano 2010 3182/3682/4332 All H2 Double doors 350 02 012* * Rear door ladder is not suitable for vehicle rear doors with windows bott vario Rear door ladder for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Expert 2007 3000/3122 All H1 Double doors 350 02 002* Expert 2007 3122 L2 H2 Double doors 350 02 006* Boxer 2006 3450/4035 L2, L3 H2 Double doors 350 02 009* * Rear door ladder is not suitable for vehicle rear doors with windows 185

bott vario Rear door ladder Rear door ladder for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Trafic 2014 3098/3498 All H1 Double doors 350 02 003* Trafic 2014 3098/3498 All H2 Double doors 350 02 006* Master 2010 3182/3682/4332 All H1 Double doors 350 02 008* Master 2010 3182/3682/4332 All H2 Double doors 350 02 012* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Proace 2013 3000/3122 All H1 Double doors 350 02 002* Proace 2013 3122 L2 H2 Double doors 350 02 006* * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle T6 2015 3000/3400 All H1 Double doors 350 02 004* Crafter 2006 3250/3665/4325/4325L All H1 Double doors 350 02 007* Crafter 2006 3250/3665/4325/4325L All H2 Double doors 350 02 011* * Rear door ladder is not suitable for vehicle rear doors with windows 186 www.bott.ie

bott vario Accessories Clothes hooks Consists of 2 plastic holders, a plastic-coated steel tube and 4 hooks Black / galvanised hooks 457 x 26 x 55 630 03 022.10V Folding table fitting Galvanised steel Use to create a folding work surface 3-position angle adjustment Load capacity 200 kg bott vario System depth mm 30 x 300 x 200 340 080 10 013 36 x 400 x 270 440 080 10 014 187

bott vario Accessories Document / first-aid kit holders Anodised aluminium Version From system depth mm DIN A4 portrait 340 215 x 85 x 275 625 30 001.97V DIN A4 landscape 440 320 x 85 x 275 625 30 002.97V DIN first-aid kits 340 175 x 93 x 230 625 30 003.97V Long items 240 114 x 114 x 500 625 30 004.97V Long items 240 76 x 76 x 500 625 30 005.97V DIN A4 angled 340 256 x 300 x 82 625 30 006.97V 188 www.bott.ie

bott vario Accessories Front loading deposit safe Safe for securely transporting money and valuables in the vehicle The deposit safe cannot be opened by the driver; the contents are removed at the main office Deposit drawer with anti-fishing protection Puncture proof security lock Colour: anthracite grey (RAL 7016) Version Safe with a deposit drawer 405 x 341 x 655 600 18 003.19 Safe For vertical or horizontal use Puncture proof security lock Colour: anthracite grey (RAL 7016) bott vario Version Safe 420 x 200 x 400 600 18 005.19 189

bott vario Accessories Ring binder compartment For 2 or 6 DIN A4 ring binders, width 80 mm Anodised aluminium Dividers (optional) Version for 2 ring binders 163 x 311 x 215 630 03 004.97V for 6 ring binders 496 x 311 x 215 630 03 005.97V Dividers (pair) 284 x 218 x 16 630 03 006.97V Jerrycan compartment For 5L plastic fuel cans or 10L/20L steel fuel canisters For 5L canisters: made of anodised aluminium For 10L/20L canisters: made of powder-coated steel RAL 7016 Incl. cam buckle strap for securing canisters while driving Version for 1x 5l canister 163 x 311 x 215 630 03 007.97V for 1x 10L/20L jerrycan 173 x 342 x 243 630 03 008.19V for 3x 10L/20L canister 518 x 342 x 243 630 03 009.19V 190 www.bott.ie

bott vario Accessories Storage box for end frames Storage box for installing on bott vario end frames Incl. perfo clips and bolts for securing Colour: anthracite grey (RAL 7016) From system depth mm 340 320 x 100 x 100 630 02 094.19V 440 420 x 100 x 100 630 02 095.19V CarOffice Storage box with folding anti-slip writing surface For attaching to passenger seat using seat belt With different storage compartments Incl. removable box for small items bott vario 665 x 370 x 265 630 03 025.90V 191

bott vario Accessories bott vario CarOffice Practical way to store office supplies Ensures order in the passenger seat Two pockets for brochures, catalogues and other documents A storage box for small items that can be easily removed A folding, non-slip writing surface with magnetic holders and built-in bottle holders Simple and secure mounting in the passenger seat with a seat belt and a variably adjustable headrest adapter 340 x 520 x 690 630 03 098.19V Document holder A lighter plastic pocket for documents, brochures and small document folders A4 landscape format Incl. label clip for colour coordination Hole pattern matched to the perfo hole grid in the bott vario end frames for quick installation without drilling From system depth mm 340 x 100 x 213 340 140 14 028.19 192 www.bott.ie

bott vario Accessories ABC powder extinguisher 2 kg with vehicle mount 2 kg ABC dry powder acc. to DIN EN 3 Constant pressure device Secured against accidental use Approx. 4 m effective range One-handed operation Incl. vehicle mount 630 03 049.90V ABC powder extinguisher 6 kg with vehicle mount 6 kg ABC dry powder acc. to DIN EN 3 Charger Secured against accidental use Incl. vehicle mount With CO 2 gas cartridge bott vario 630 03 050.90V 193

bott vario Accessories Traffic cone with foot Height while folded: 60 mm With flashing and continuous light Incl. storage bag 280 x 280 x 500 850 01 025 390 x 390 x 750 630 03 077.90V Rotating beacon 12/24 V A Latest LED technology Magnetic base version with 2.5m spiral power cable and 12V cigarette lighter plug Version with fixing screws with 2-wire connection cable 0.1 m B Version Power consumption Watt Ø x H mm A with magnetic base 14 183 x 162 635 01 041.90V B for screw-on 10 165 x 119 635 01 042.90V 194 www.bott.ie

bott vario Lighting and power LED flood light 12/24 V For lighting the vehicle surroundings Latest LED technology Protection class IP67 2-wire connection cable 0.35 m LED Lumen Power consumption Watt 1700 18 310 x 82 x 38 635 01 040.90V bott vario 195

bott vario Lighting and power LED Worklight 12/24 V Latest LED technology For outdoor use Scattering angle 90 Protection class IP69 Can be swivelled LED Lumen Power consumption Watt 1100 18 178 x 49.5 x 149 635 01 005.90V LED Worklight 12/24 V Latest LED technology For outdoor use Aluminium pressure-casted housing with impact-resistant plastic lens Protection class IP69K Can be swivelled 2-wire connection cable 2.5 m Fixings included LED Lumen Power consumption Watt 1000 18 140 x 29 x 28 635 01 047.90V 196 www.bott.ie

bott vario Lighting and power LED strip 12 V Latest LED technology Light colour: Neutral white 6000 Kelvin Protection class IP65 With waterproof, transparent silicone casing With 2-wire connection cable 0.5 m Self-adhesive with 3 m tape Can be shortened in 50 mm increments Power consumption Watt Length mm 6 1000 635 01 052 12 2000 635 01 053 LED surface light 12 V Bright spread pattern to illuminate large surfaces Latest LED technology Scattering angle 90 Light colour: Neutral white 6000 Kelvin Protection class IP67 Housing made of robust polycarbonate 2-wire connection cable 0.5 m Fixings included bott vario LED Lumen Power consumption Watt 600 7 90 x 170 x 13 635 01 036.90V 197

bott vario Lighting and power 12 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Light colour: Neutral white 6000-6500 Kelvin Aluminium housing 2-wire connection cable 1m Fixings included LED Lumen Power consumption Watt 530 9 500 x 30 x 12 635 01 032.90V 900 15 900 x 30 x 12 635 01 033.90V 12 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Protection class IP40 LED Lumen Power consumption Watt 320 4 314 x 40 x 22 635 01 027.90V 198 www.bott.ie

bott vario Lighting and power LED strip light 12V On/off switch State-of-the-art LED technology Scattering angle 160 Power consumption = 0.6 A Plastic housing LED Lumen 500 457 x 32 x 19 635 01 002.90V 230 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Light colour: Neutral white 4000 Kelvin Aluminium housing Fixings included bott vario LED Lumen Power consumption Watt 900 9 550 x 41 x 42 635 01 034.90V 1300 13 950 x 41 x 42 635 01 035.90V 3000 mm connection cable with schuko plug 435 03 020.90V 3-wire, 200 mm connection cable without plug for direct connection 635 01 038.90V 200 mm connection cable 635 01 039.90V 199

bott vario Lighting and power Work light with magnetic base 12V / Work light with magnetic base 12/24V LED A B Work light On/off switch H3 bulb Housing with integrated handle and glass lens For 12 V power socket 2.5m spiral power cable LED w Latest LED technology Aluminium housing with carrying handle Protection class IP67 Spiral cable with 12V plug, length 8m 1755 Lumen Illust. Version Power consumption Watt A H3 55 160 x 160 x 290 505 02 042 B LED 27 108 x 75 x 205 505 02 095 LED battery-operated hand lamp Latest LED technology Li-Ion battery Lamphead can swivel 120 and turn 180 Magnetic lamp socket Retractable hanging hooks Batery life approx. 2.5 hrs. Incl. charger for 12-volt, 24-volt and 230-volt power sockets LED Ø x H mm 51 x 247 505 02 085 200 www.bott.ie

bott vario Licht und Energie LED work lamp with charging station Impact-resistant and dustproof Can be recharged from a 12V, 24V or 230V socket With emergency light function, flashing operation possible Lamp head can be swivelled 110 Lighting time 5 hours, with flashing light 10 hours and emergency light function 75 hours Illumination range = 150 m Scope of delivery: Work lamp with battery and 2 front panels (clear and orange), charging station with 230 V connection cable with Euro plug and 12/24 V connecting cable with 12V plug LED 104 x 120 x 245 635 01 006.90V EX LED work lamp with explosion protection and charging station For use in EX zone areas 1, 2, 21 and 22, which are potentially subject to gas and dust explosions Impact-resistant plastic Protection class IP64 Lamp head can be swivelled 110 Battery life of the main lamp in conditions of continuous operation is about 5 hours, about 10 hours for flashing operation, and 75 hours for emergency lighting. Illumination range approx. 150m Can be recharged from a 12V, 24V or 230V socket Scope of delivery: Work lamp with battery and 2 front panels (clear and orange), charging station with 230 V connection cable with Euro plug and 12/24 V connecting cable with 12V plug bott vario 104 x 120 x 245 635 01 051.90V 201

bott vario Lighting and power Socket 12/24 V 12V surface-mounted socket for installation in vehicles Protected against short-circuiting and reverse polarity USB port with a charging current up to 5000 ma (2x2500mA) and automatic voltage reduction from 12/24 V to 5 V Version 1x 12/24 V 35 x 33 x 85 635 01 014.90V 3x 12/24 V 95 x 33 x 85 635 01 015.90V 2x USB 35 x 33 x 85 635 01 044.90V 2 USB, 2x 12/24 V 95 x 33 x 85 635 01 045.90V Spiral cable 12V with fuse Safety plug and integrated fuse (8A) Max. cable length = 3 m 635 01 016.90V 202 www.bott.ie

bott vario Lighting and power 230 V socket strip On/off switch With 5 Schuko sockets 1.6 m power lead 462 x 45 x 74 635 01 008.90V 230 V socket strip with MCB / RCD protection and on/off switch With 4 Schuko sockets 1.6 m power lead With on/off switch With 30 ma MCB / RCD protection bott vario 462 x 45 x 74 635 01 009.90V 203

bott vario Lighting and power 230 V socket strip with external power feed 2 m connecting cable with power inlet and hinged cover as well as an earthing cable for vehicle-side installation With 4 Schuko sockets with a hinged lid With 30 ma MCB / RCD protection On/off switch 2.5 m connecting cable between vehicle power inlet and the external socket Cannot be used in conjunction with an inverter 462 x 45 x 74 635 01 023.90V 204 www.bott.ie

bott vario Lighting and power Sine wave inverter 350W Pure sine wave Input voltage = 12 volts Output voltage = 230 volts Continuous output = 350 watts Peak output = 700 watts With USB port for charging small, electronic devices Protected against short-circuiting and overload Incl. connection cable 2 m Only to be connected to a single device Info to permit an insulation fault shutdown, the installation must be performed in accordance with BGI 867 5.3.3 124 x 199 x 49 635 01 018.90V Sine wave inverter 800 W Pure sine wave Input voltage = 12 volts Output voltage = 230 volts Continuous output = 800 watts Peak output = 1600 watts Protected from short-circuiting, overload, overheating, excessive or insufficient battery voltage Incl. connection cable 1.5 m Only to be connected to a single device bott vario Info to permit an insulation fault shutdown, the installation must be performed in accordance with BGI 867 5.3.3 305 x 165 x 108 635 01 043.90V 205

bott vario Lighting and power Rear view camera with monitor 12 V Digital 7 (17.8 cm) TFT-LCD monitor in a 16:9 format 2 camera inputs Very good viewing angle (left/right 80, up/down 40 /60 ) High brightness Integrated loudspeaker W 200 x D 29 x 115 mm Coloured spherical camera for installation on vans and transport vehicles Viewing angle 110 High light sensitivity Integrated microphone Weatherproof and waterproof (protection class IP68) W 210 x D 135 x H 50 mm 20 m connection cable 635 01 049.90V 206 www.bott.ie

207 bott vario

bottbox the standard materials box for assembly and logistics 208 www.bott.ie

bott bottbox Applications Workshop Warehouse Assembly workstation Mobile systems High load capacity thanks to re-inforced base and side walls Secure and comfortable carrying due to the ergonomically-shaped front and back grippers Great feel and secure handling thanks to high-quality, finely textured surfaces Easy to clean thanks to smooth insides Robust design thanks to shock-resistant polypropylene, high levels of dimensional stability across all temperatures Stackable even boxes with lids and boxes of varying depths Cases / Boxes 209

bott bottbox Transparent hinged lid Transparent viewing window Hopper function Prevents content contamination and ensures safety during mobile use The handle box becomes a storage box with the maximum amount of usable storage thanks to an optional, transparent viewing window Viewing window may also be used to create a hopper, thereby creating ergonomical access at the front of the box whilst retaining the maximum usable volume at the rear of the box Drawer function Optional retaining clips can be fixed to the shelf allowing the box to be used as a drawer Integrated drawer stop device prevents box from falling out 210 www.bott.ie

bott bottbox Label strip Different coloured label strips allow for optional colour coding Options Secure box content separation thanks to reliable divider fixation Option to insert business cardsized warehouse and Kanban cards on the rear 7 different sizes Wide array of applications thanks to 7 different sizes Flexibility thanks to intelligent system dimensions: 2 narrow boxes can be replaced by a wide box ESD versions are available Cases / Boxes 211

bott bottbox bottbox kits for bott vario in-vehicle equipment bottbox including viewing window Colour: anthracite grey (RAL7016) Divider kit for shelves, drop-front shelves and bottbox shelves System width mm System depth mm Quantity of boxes W x D mm 525 240 3x 1-2-90 630 20 167.19V 525 340 3x 1-3-165 630 20 142.19V 525 340 1x 1-3-165, 1x 2-3-165 630 20 143.19V 525 440 3x 1-4-165 630 20 144.19V 525 440 1x 1-4-165, 1x 2-4-165 630 20 145.19V 525 540 1x 1-4-165, 1x 2-5-165 630 20 146.19V 775 240 5x 1-2-90 630 20 168.19V 775 340 5x 1-3-165 630 20 147.19V 775 340 1x 1-3-165, 2x 2-3-165 630 20 148.19V 775 440 5x 1-4-165 630 20 149.19V 775 440 1x 1-4-165, 2x 2-4-165 630 20 150.19V 775 540 1x 1-4-165, 2x 2-5-165 630 20 151.19V 1025 240 7x 1-2-90 630 20 169.19V 1025 340 7x 1-3-165 630 20 152.19V 1025 340 1x 1-3-165, 3x 2-3-165 630 20 153.19V 1025 440 7x 1-4-165 630 20 154.19V 1025 440 1x 1-4-165, 3x 2-4-165 630 20 155.19V 1025 540 1x 1-4-165, 3x 2-5-165 630 20 156.19V 1225 240 9x 1-2-90 630 20 170.19V 1275 340 9x 1-3-165 630 20 157.19V 1275 340 1x 1-3-165, 4x 2-3-165 630 20 158.19V 1275 440 9x 1-4-165 630 20 159.19V 1275 440 1x 1-4-165, 4x 2-4-165 630 20 160.19V 1275 540 1x 1-4-165, 4x 2-5-165 630 20 161.19V 1525 240 11x 1-2-90 630 20 171.19V 1525 340 11x 1-3-165 630 20 162.19V 1525 340 1x 1-3-165, 5x 2-3-165 630 20 163.19V 1525 440 11x 1-4-165 630 20 164.19V 1525 440 1x 1-4-165, 5x 2-4-165 630 20 165.19V 1525 540 1x 1-5-165, 5x 2-5-165 630 20 166.19V 212 www.bott.ie

bott bottbox bottbox multi-packs with viewing window Colour: anthracite grey (RAL 7016) Pack quantity 6-48 Description Pack quantity 1-1- 65 130 x 100 x 65 48 130 22 053.19 1-2- 90 130 x 198 x 90 36 130 22 054.19 1-3-165 130 x 298 x 165 24 130 22 055.19 2-3-165 264 x 298 x 165 12 130 22 056.19 1-4-165 130 x 398 x 165 12 130 22 057.19 2-4-165 264 x 398 x 165 6 130 22 058.19 2-5-165 264 x 498 x 165 6 130 22 060.19 bottbox multi-packs without viewing window Colour: anthracite grey (RAL 7016) / Colour ESD: black Pack quantity 6-48 Cases / Boxes Description Pack quantity ESD 1-1- 65 130 x 100 x 65 48 130 22 045.19 130 22 045.72 1-2- 90 130 x 198 x 90 36 130 22 046.19 130 22 046.72 1-3-165 130 x 298 x 165 24 130 22 047.19 130 22 047.72 2-3-165 264 x 298 x 165 12 130 22 048.19 1-4-165 130 x 398 x 165 12 130 22 049.19 2-4-165 264 x 398 x 165 6 130 22 050.19 2-5-165 264 x 498 x 165 6 130 22 052.19 213

bott bottbox bottbox cross dividers Colour: transparent Material: PC (polycarbonate) Pack quantity 6 For use with bottbox Pack quantity 118 x 6 x 68 1-2-90, 6 130 22 031 118 x 6 x 143 1-3-165, 1-4-165 6 130 22 032 252 x 6 x 143 2-3-165, 2-4-165, 2-5-165 6 130 22 033 bottbox viewing window Viewing window may also be used to create a hopper Colour: transparent Material: PC (polycarbonate) Pack quantity 6 For use with bottbox Pack quantity 118 x 12 x 27 1-1-65, 1-2-90 6 130 22 028 118 x 12 x 88 1-3-165, 1-4-165 6 130 22 029 252 x 12 x 88 2-3-165, 2-4-165,2-5-165 6 130 22 030 214 www.bott.ie

bott bottbox bottbox hinged lid For closing bottboxes Material: PC (polycarbonate) Colour: transparent Pack quantity 6 For use with bottbox Pack quantity 253 x 274 x 4 2-3-165 6 130 22 034 253 x 374 x 4 2-4-165 6 130 22 035 253 x 474 x 4 2-5-165 6 130 22 036 Cases / Boxes 215

bott bottbox bottbox label clip 36 pieces in the selected colour Pack quantity 36 Colour RAL Pack quantity 103 x 11 x 20 1023 - traffic yellow 36 130 22 024.12 103 x 11 x 20 5010 gentian blue 36 130 22 024.11 103 x 11 x 20 3001 - signal red 36 130 22 024.04 236 x 11 x 20 1023 - traffic yellow 36 130 22 026.12 236 x 11 x 20 5010 gentian blue 36 130 22 026.11 236 x 11 x 20 3001 - signal red 36 130 22 026.04 bottbox label clip 12 pieces / per colour Different coloured label strips allow for optional colour coding Set consisting of all 3 colours 1023 - traffic yellow 5010 - gentian blue 3001 - signal red Pack quantity 36 Colour RAL Pack quantity 103 x 11 x 20 1023/5010/3001 36 130 22 025 236 x 11 x 20 1023/5010/3001 36 130 22 027 216 www.bott.ie

bott bottbox bottbox labelling kit Packs of 36 (2x 18 strips) Downloadable label document templates are avaialble free of charge at www.bott.de/downloads Pack quantity 36 Version Pack quantity Paper strips 36 610 20 003 Perforated sheets of paper for printing 36 430 20 001 Cases / Boxes 217

bott Euroboxes Euroboxes Containers fit standard europallet sizes For all storage, production and transport needs Straight walls offer maximum volume with excellent strength Optional lids available Resistant to numerous acids and alkalis Temperature resistance -20 C to +60 C, short-term up to +90 C Material: Polypropylene Colour: anthracite grey Pack quantity 1-3 Width mm Depth mm Height mm Pack quantity 200 300 120 1 625 10 019.19V 120 1 625 10 013.19V 175 1 625 10 020.19V 400 300 235 1 625 10 014.19V 320 1 625 10 015.19V Lid for Eurobox (W 400 x D 300 mm) 3 122 04 064 120 1 625 10 016.19V 175 1 625 10 021.19V 600 400 220 1 625 10 017.19V 320 1 625 10 018.19V Lid for Eurobox (W 600 x D 400 mm) 3 122 04 065 218 www.bott.ie

bott Aluminium transport cases Aluminium transport cases 025 01 003 025 01 004 Load capacity: 35 kg per handle Large-sized handles Snap lock for attaching padlocks Lid with stacking corners with guards Lid with rubber sealing profile on all sides Compatible with europallets 025 01 005 025 01 007 025 01 006 025 01 002 025 01 001 External dimensions mm Internal dimensions mm Weight kg Contents Litre 585 x 385 x 250 550 x 350 x 220 4.5 42 025 01 001 585 x 385 x 410 550 x 350 x 380 5.3 73 025 01 002 785 x 385 x 340 750 x 350 x 310 6.1 81 025 01 003 785 x 585 x 410 750 x 550 x 380 8.1 156 025 01 004 785 x 585 x 610 750 x 550 x 580 9.6 239 025 01 005 885 x 485 x 380 850 x 450 x 350 7.7 133 025 01 006 1185 x 785 x 510 1150 x 750 x 480 15.4 414 025 01 007 Cases / Boxes 219

bott vario Case systems a standard in workshops, vehicles and assembly versatile dividers carrying comfort 220 www.bott.ie

bott vario Case Systems variosort Sturdy small parts storage case Comfortable one-handed operation thanks to a patented locking mechanism Many layout possibilities variocase One system, one standard variosafe Extremely light, robust service case made of aluminium or alternatively sheet steel For workshops, vehicles and construction sites In cabinets, vans and cars Quickly secured in vehicles for fast load securing solutions Securely clip together for safe transportation Carry box with lockable lid Interior compartments created using small parts storage boxes, dividers and die-cut foam inserts Integral latching mechanism allows several cases to be stacked and simultaneously secured together Ergonomic handle for comfortable carrying Sprung catches secure the lid automatically when closed Plastic corner guards Compartments created using small parts storage boxes, dividers and die-cut foam inserts Cases / Boxes 221

bott vario In practice 222 www.bott.ie

bott Case systems in practice Cases / Boxes 223

bott variosafe case systems variosafe carry box ABS plastic: high strength and low weight Colour: anthracite grey (RAL 7016) - consistent design Securely connects multiple stacked boxes: Effectively creates one container from several to ease transportation Handle position controls case access: Contents are automatically secured and access blocked when case is picked up Optional compartments created using small parts storage boxes, dividers and die-cut foam inserts: structured organisation For storage on guide-rails, on a shelf, or directly between vario endframes: numerous ways to integrate into storage design 224 www.bott.ie

bott variosafe case systems variosafe M with 11 boxes System depth 340 mm 11 boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 103.19V variosafe M with 20 boxes System depth 340 mm 20 boxes Load capacity: 15 kg Cases / Boxes Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 104.19V 225

bott variosafe case systems variosafe L with 18 boxes System depth 340 mm 18 boxes in 2 levels Load capacity: 15 kg Internal dimensions 525 x 340 x 190 400 x 275 x 153 625 11 033.19V variosafe L with 27 boxes System depth 440 mm 27 boxes in 2 levels Load capacity: 15 kg Internal dimensions 525 x 440 x 190 400 x 375 x 153 625 11 034.19V 226 www.bott.ie

bott variosafe case systems variosafe empty System depth 340 mm Case types M, L and X System depth 340 mm Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 097.19V 525 x 340 x 190 400 x 275 x 153 625 11 029.19V 525 x 340 x 390 400 x 275 x 365 625 11 098.19V variosafe empty System depth 440 mm Case type L System depth 440 mm Load capacity: 15 kg W x D x H mm Internal dimensions 525 x 440 x 190 400 x 375 x 153 625 11 030.19V Cases / Boxes 227

bott variosafe case systems variosafe M with divider System depth 340 mm 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 109.19V variosafe L with divider 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x 190 400 x 275 x 153 625 11 042.19V 525 x 440 x 190 400 x 375 x 153 625 11 043.19V 228 www.bott.ie

bott variosafe case systems variosafe X with divider System depth 340 mm 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x 390 400 x 275 x 365 625 11 110.19V variosafe M with nozzle insert System depth 340 mm With 90 storage holes in a foam inlay Incl. 3 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 118.19V Cases / Boxes 229

bott variosafe case systems variosafe M with die-cut foam insert System depth 340 mm 12 mm base mat and 63/69 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 115.19V variosafe L with die-cut foam insert 12 mm base mat and 63/69 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x 190 400 x 275 x 153 625 11 046.19V 525 x 440 x 190 400 x 375 x 153 625 11 047.19V 230 www.bott.ie

bott variosafe case systems Cases / Boxes 231

bott variosafe case systems variosafe M with protective padded insert System depth 340 mm Incl. protective padding for impact-sensitive transport goods Base mat 5 mm, top mat 22 mm Load capacity: 15 kg Internal dimensions 525 x 340 x 115 400 x 275 x 78 625 11 134.19V 232 www.bott.ie

bott variosafe case systems variosafe X with suspended file frame System depth 340 mm With suspended file frame for file folders DIN 821 Incl. lid bag, office design Load capacity: 15 kg Internal dimensions 525 x 340 x 390 400 x 275 x 365 625 11 130.19V variosafe X with cable storage insert System depth 340 mm For storing cable reels with max. diameter 250 mm Storage capacity (width) approx. 300 mm Incl. lid bag for tools Load capacity: 15 kg Internal dimensions 525 x 340 x 390 400 x 275 x 365 625 11 129.19V Cases / Boxes 233

bott variosafe case systems variosafe X with aerosol can storage insert System depth 340 mm For 13 aerosol cans with max. diameter 73 mm Load capacity: 15 kg Internal dimensions 525 x 340 x 390 400 x 275 x 365 625 11 131.19V variosafe X with cartridge storage insert System depth 340 mm For 24 cartridges with max. diameter 53 mm Load capacity: 15 kg Internal dimensions 525 x 340 x 390 400 x 275 x 365 625 11 132.19V 234 www.bott.ie

bott variosafe case systems variosafe divider Aluminium System depth 340 mm For case type Pack quantity M 2 625 11 121.98V L 2 625 11 039.98V X 2 625 11 122.98V Pack quantity 2 System depth 440 mm For case type Pack quantity L 2 625 11 040.98V variosafe die-cut foam insert For use with case type M 12 mm base mat and 63/69mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal System depth 340 mm Quantity die-cut mats Die-cut mats 1 400 x 272 x 75 613 01 125.19V 2 400 x 272 x 150 613 01 116.19V System depth 440 mm Quantity die-cut mats Die-cut mats 2 400 x 372 x 150 613 01 117.19V Cases / Boxes 235

bott variosafe case systems variosafe X aerosol can storage insert System depth 340 mm A: for 13 aerosol cans with max. diameter 73 mm B: for 24 cartridges with max. diameter 53 mm Anthracite grey RAL 7016 A B Illust. A 393 x 264 x 130 613 01 127.19V B 393 x 264 x 130 613 01 128.19V variosafe cushion System depth 340 mm For use with case types M, L, X Foam: anthracite grey RAL 7016 Version Cushion 630 03 056.19V 236 www.bott.ie

bott variosafe case systems variosafe lid bags for office supplies For a system depth of 340 mm For use with case types M, L, X Anthracite grey RAL 7016 Height 276 mm A B C Illust. Version A Lid storage bag 630 03 055.19V B Office supplies 630 03 054.19V C Tool supplies 630 03 053.19V variosafe anti-slip mats For storing sensitive parts Thickness 2.5 mm Material: hard-wearing, tear-resistant PES glass fibre fabric with PVC coating both sides Anti-slip, dimensionally stable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Pack quantity: 5 pieces Pack quantity 5 System depth mm 395 x 268 x 2.5 340 630 03 070.19V 398 x 370 x 2.5 440 630 03 071.19V Cases / Boxes 237

bott Case systems accessories variosafe foam insert for manual trimming Clear arrangement of tools Unique definition of storage locations and contents Missing items immediately noticed The user can easily make precise cutouts with a standard cutting tool or a cutter set using simple handles A standard cutting tool or a cutter set Material: Underlay: XPE 33, thickness 5 mm Inlay: PE 30, thickness 22 mm Colour: Underlay: Red Inlay: black Properties: PE 30 laminated, heat-resistant up to 112 C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly For case depth mm 369 x 271 x 27 340 630 03 072.10V 369 x 371 x 27 440 630 03 073.10V Cutter set for foam inlays 3 cutters with protective covers 1x width 20 mm, 1x width 50 mm, 1x semicircular, 20 x 20 x 80 mm Cutter Folding ruler Weight kg 225 x 170 x 45 0.4 130 17 001.10V 238 www.bott.ie

bott Case systems accessories variosafe vertical holder For securing variosafes in vehicles For use with all variosafes, system width 340 mm For mounting to vehicle floor and wall Max. stacking height 850 mm 450 x 165 x 1000 630 03 069.51V Sack truck Sturdy aluminium / plastic construction Approx. loading area = W 490 x D 270 mm Folding base and wheels Telescopic handle Incl. bungee cord to secure goods in place Max. load capacity = 125 kg Cases / Boxes Extended Folded 490 x 490 x 1090 490 x 60 x 760 630 03 026.90V 239

bott variosort case systems variosort service case Comfortable one-handed operation thanks to a patented locking mechanism High-quality plastic housing with transparent lid: view of contents, reduces search times Inner compartment with small parts boxes or foam inlays: clear and adjustable organisation Profiled base and lid: secure case stacking Rounded-off edges to protect users and sensitive surfaces Can be securely connected together with variosafe Load capacity: 15 kg variosort with 11 boxes System depth 340 mm 11 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 094.19V 240 www.bott.ie

bott variosort case systems variosort with 20 boxes System depth 340 mm 20 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 095.19V variosort with 28 boxes System depth 340 mm 28 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 096.19V Koffer / Boxen 241

bott variosort case systems variosort with die-cut foam insert System depth 340 mm 12 mm base mat and 63/69mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 126.19V variosort with nozzle insert System depth 340 mm With 90 storage holes in a foam inlay Incl. 3 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 125.19V 242 www.bott.ie

bott variosort case systems variosort empty System depth 340 mm Load capacity: 15 kg Internal dimensions 525 x 340 x 90 400 x 275 x 75 625 11 093.19V variosort storage pocket Anodised aluminium holder variosort service case not included 95 x 335 x 315 625 11 128.97V Cases / Boxes 243

bott variosort case systems variosort with 15 small parts storage boxes System depth 340 mm Load capacity: 10 kg Internal dimensions 354 x 323 x 55 329 x 237 x 46 625 11 019.19V variosort with storage pocket Anodised aluminium holder Load capacity. 10 kg 362 x 61 x 327 625 11 025.19V 244 www.bott.ie

bott variocase case systems variocase service case Anodised aluminium: low weight with surface protection Alternatively: sturdy, powder-coated sheet steel, colour: anthracite grey (RAL 7016) Intelligent structural folds: very high stability Ergonomic handle for comfortable carrying Sprung catches secure the lid automatically when closed: safety Plastic corner guards: protects valuable surfaces when put down Optional compartments created using small parts storage boxes, dividers and die-cut foam inserts: structured organisation Cases / Boxes 245

bott variocase case systems variocase S with 11 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x 64 425 x 250 x 50 625 11 063.97V variocase S with 21 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 64 425 x 325 x 50 625 11 052.97V 246 www.bott.ie

bott variocase case systems variocase M with 11 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x 83 425 x 250 x 75 625 11 010.97V variocase M with 17 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x 83 425 x 250 x 75 625 11 009.97V Cases / Boxes 247

bott variocase case systems variocase M with 13 boxes System depth 340 mm Load capacity: 15 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 83 425 x 325 x 75 625 11 013.97V variocase M with 21 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium or powder-coated steel RAL 7016 Internal dimensions 446 x 359 x 83 425 x 325 x 75 625 11 012.97V Sheet steel design: 446 x 359 x 83 425 x 325 x 75 625 11 057.19V 248 www.bott.ie

bott variocase case systems variocase M with 28 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 83 425 x 325 x 75 625 11 011.97V Cases / Boxes 249

bott variocase case systems variocase L with 40 boxes System depth 440 mm Load capacity: 25 kg Aluminium or sheet steel design Internal dimensions 446 x 359 x 134 425 x 325 x 126 625 11 015.97V Sheet steel design: 446 x 359 x 134 425 x 325 x 126 625 11 058.19V variocase L with 32 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 134 425 x 325 x 126 625 11 014.97V 250 www.bott.ie

bott variocase case systems variocase X with 32 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 159 425 x 325 x 151 625 11 016.97V variocase X with 40 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x 159 425 x 325 x 151 625 11 017.97V Cases / Boxes 251

bott variocase case systems variocase M with dividers and cross dividers System depth 340 mm 4 cross dividers / 2 dividers Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x 83 425 x 250 x 75 625 11 005.97V variocase with dividers and cross dividers System depth 440 mm 4 cross dividers / 2 dividers Load capacity: 25 kg Aluminium or sheet steel design inkl. Incl. 4x Cross Steckwände, dividers, 2x Internal 2x Trennwände Dividers dimensions 446 x 359 x 83 425 x 325 x 75 625 11 006.97V 446 x 359 x 134 425 x 325 x 126 625 11 007.97V 446 x 359 x 159 425 x 325 x 151 625 11 008.97V Sheet steel design: 446 x 359 x 83 425 x 325 x 75 625 11 059.19V 446 x 359 x 134 425 x 325 x 126 625 11 060.19V 446 x 359 x 159 425 x 325 x 151 625 11 061.19V 252 www.bott.ie

bott variocase case systems Cases / Boxes 253

bott variocase case systems variocase M empty System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x 83 425 x 250 x 75 625 11 001.97V variocase empty System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Type Internal dimensions M 446 x 359 x 83 425 x 325 x 75 625 11 002.97V L 446 x 359 x 134 425 x 325 x 126 625 11 003.97V X 446 x 359 x 159 425 x 325 x 151 625 11 004.97V 254 www.bott.ie

bott variocase case systems variocase die-cut foam insert 12 mm base mat and 60 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Not suitable for case size S System depth 340 mm Base mat Die-cut mats 437 x 275 x 12 424 x 251 x 60 613 01 110.19V System depth 440 mm Base mat Die-cut mats 437 x 350 x 12 424 x 326 x 60 613 01 111.19V variocase holder for size M Anodised aluminium variocase service case not included System depth mm 95 x 334 x 475 340 621 03 009.97V 95 x 409 x 475 440 621 03 010.97V Cases / Boxes 255