I EFFECTIVE: November, 2002 J, OWNER'S (OPERATOR'S) MANUAL AND SAFETY INSTRUCTIONS FOR HARRINGTON CUMALONG LEVER PULLER 3/4,, /2, 2, 3, 6 and 9 Ton Capacity Model L4 Jt. A BEFORE USING THIS PRODUCT: ALWAYS SAVE THIS BOOK FOR FUTURE REFERENCE ALWAYS READ OWNER'S (OPERATOR'S) MANUAL AND SAFETY INSTRUCTIONS WARNING: IMPROPER lever hoist use could result in death or serious injury. To avoid these hazards: : NEVER hoist loads over or near people. : NEVER work under or near hoisted loads. : ALWAYS operate, inspect and maintain this hoist in accordance with applicable safety codes and regulations. These safety instructions contain important information to help you use the chain hoist in a safe manner. J, AIIIMGTO IS S ND S
6. WARRANTY.'L All products sold by Harrington Hoists, Inc. are warranted to be free from defect in material and workmanshipfrom date of shipment by Harrington forthe following periods: Manual Hoists & Trolleys -2 years Electric Hoist & Trolleys, Crane Components - year Spare/Replacement Parts - year Theproduct must be used in accordance with manufacturer's recommendations and must not have beensubject to abuse, lack of maintenance, misuse, negligence, or unauthorized repairs or alterations. Shouldany defect in material or workmanship occur during the above time period in any product, as determineby Harrington Hoist's inspection ofthe product, Harrington Hoists, Inc. agrees, at its discretion,either to replace (not including installation) or repairthe part of product free of charge and deliversaid item F.O.B. Harrington Hoists, Inc. place of business to customer. Customer must obtaina Return Goods Authorization as directed by Harrington or Harrington's published repair centerprior to shipping product for warranty evaluation. An explanation of the complaint must accompanythe product. Product must be returned freight prepaid. Upon repair, the product will be coveredfor the remainder of the original warranty period. If it is determined there is no defect, or thatthe defect resulted from causes not within the scope of Harrington's warranty, the customer will beresponsibleforthe costs of returning the product. HarringtonHoists, Inc. disclaims any and all other warranties of any kind expressed or implied as to theproduct'smerchantability or fitness for a particular application. Harrington will not be liable for death,injuriesto persons or property or for incidental, contingent, special or consequential damages,loss or expense arising in connection with the use or inability whatever, regardless of whether damage,loss or expense results from any act or failure to act by Harrington, whether negligent or wilful,or from any other reason. 7. PARTS LIST Whenordering Parts, please provide the Hoist model number and serial number located on the Hoist nameplate(seefig. below).. CD+rG. 4) HARRINGTON LB05~ TON CAPACITY Mod"'0- SelialHo- H"'~"""'ioI._I"'-. M'='i,f~&45 -. LB Nameplate 29
II I ~ ~ ADDITIONAL PARTS FOR 6 TON CAPACITY ADDITIONAL PARTS FOR 9 TON CAPACITY.. ~
Fig. No. Part Name Parts per Hoist Capacity 3/4T T /2T 2T 3T 6T 9T Top Hook Complete Set Top Hook Assembly L400008 L40000 L40005 L400020 L400030 L400060 L400090 2 Hook Assembly L4200090 3 Latch Assembly L407008 L40705 L407030 L407060 L407090 4 Shaft L4053060 5 Shaft Stopper Pin 2 L4083060 6 Top Yoke A, B Set L450090 7 Idle Sheave L405060 8 Socket Bolt 3 90926 9 Lever Nut 3 L4082090 0 Bottom Hook Complete Bottom Hook Assembly L402008 L40200 L40205 L402020 L402030 L402060 L402090 Hook Assembly L4200060 L4200090 2 Latch Assembly L407008 L40705 L407030 L407060 L407090 4 Shaft L4053060 5 Shaft Stopper Pin 2 L4083060 4 Bottom Yoke Set L4503060 L4503090 5 Idle Sheave L405060 6 S ocket Bolt 3(2) 909296 90926 7 L ever Nut 3(2) L4082060 L4082090 8 Name Plate C L4805060 9 Chain Pin L404008 M30405 M304025 M304075 20 Chain Stopper Link L4045008 L404505 L4045030 2 Slotted Nut for Fig. No. 9 M3049005 M204900 M2049020 22 Split Pin for Fig. No. 9 900942 23 Split Pin for Fig. No. 9 9009402 90094 900942 24 Side Plate A Assembly L450008 L45005 L450030 25 Side Plate B Assembly L4502008 L450205 L4502030 26 Gear Case L4503008 L450305 L4503030 27 Gear # 2 2 L452008 L45205 L452030 28 Pinion L4008 L405 L4030 29 Load Gear L44008 L4405 L44030 30 Load Sheave L46008 L4605 L46030 3 Washe r L47008 L4705 L47030 32 Friction Plate 2 L45008 L4505 33 Ratchet Disc L452008 L45205 34 Friction Disc L453008 L45305 35 Bushing L454008 L45405 36 Pawl 2 L455008 L45505 L455030 37 Pawl Spring 2 L458008 L45805 Figures in parenthesis show the number for 9 ton capacity. 3
LEVER ASSEMBLY FOR LOAD SIGNAL TYPE Fig. No. Part Name Parts per Hoist Capacity 3/4T T /2T 2T 3T 6T 9T Lever Complete Set Y2SE008-62 Y2SU00-62 Y2SE05-62 Y2SU020-62 Y2SE03062 2 Grip L423S008 3 Name Plate with Rivets L4800008 L480000 L480005 L4800020 L4800030 L4800060 L4800090 4 Name Plate B L480S008 33
www.harringtonhoists.com Harrington Hoists, Inc. 40 West End Ave. Manheim, PA 7545 Phone: 77-665-2000 Toll Free: 800-233-300 Fax: 77-665-286 Harrington Hoists-Western Division 234 Pomona Rincon Rd. #03 Corona, CA 92880 Phone: 909-279-700 Toll Free: 800-37-7 Fax: 909-279-7500 L4LBPL