D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole. Other features of the DL BOP include: The Cameron DL BOP is shorter in height than comparable annular preventers. Available in dual configuration in certain sizes. A quick-release top with a one-piece split lock ring permits quick packer change-out with no loose parts involved. The design also provides visual indication of whether the top is locked or unlocked. The DL BOP is designed to simplify field maintenance. Components subject to wear are field-replaceable and the entire operating system may be removed in the field for immediate change-out without removing the BOP from the stack. Twin seals separated by a vented chamber positively isolate the BOP operating system from well bore pressure. High strength polymer bearing rings prevent metal-to-metal contact and reduce wear between all moving parts of the operating systems. All Cameron DL BOPs are manufactured to comply with NACE specification MR-01-75 for H 2 S service. A shallow gas bleed port is available in some sizes. Packers for DL BOPs have the capacity to strip pipe as well as close and seal on almost any size or shape object that will fit into the well bore. These packers will also close and seal on open hole. Popular sizes of the DL BOP are available with high-performance CAMULAR TM annular packing subassemblies. Special stripper packers are available in some sizes to accommodate 6-5/8" pipe/mandrels. The Cameron DL BOP is available in sizes from 7-1/16 to 21-1/4 and in working pressures from 2000 to 20,000 psi. TC1001-04 139 2004 Cooper Cameron, Cameron Division
TC1001-04 140 2004 Cooper Cameron, Cameron Division
D and DL Annular BOP Components Annular Blowout Preventer Components Item Number Description Item Number Description 1 Body 43 Stud* 2 Top 44 Nut* 3 Piston 45 Bushing Retaining Screw 4 Inner Cylinder Head 46 Oil Injection Fitting 5 Outer Cylinder Head 47 Lifting Eye* 6 Pusher Plate 50 Support Plate Bearing Ring 7 Donut and Packer** 51 Piston ID Bearing Ring 9 Lock Ring 52 Inner Cylinder OD Bearing Ring 10 Actuator Ring 53 Outer Cylinder ID Bearing Ring 11 Actuator Screw 54 Piston OD Bearing Ring 12 Actuator Screw Bushing 55 Pusher Plate Bearing Ring 13 Outer Cylinder Lock Segment 56 Outer Cylinder ID Wiper Ring 14 Lock Segment Retaining Ring 57 Inner Cylinder OD Wiper Ring 15 Support Plate 58 Inner Cylinder ID Lip Seal 16 Top Trash Seal 59 Inner Cylinder ID Lip Seal 17 Actuator Screw Bearing 60 Inner Cylinder OD Lip Seal 29 Anchor Shackle 61 Piston ID Lip Seal 30 Inner Cylinder Stud 62 Piston OD Lip Seal 31 Inner Cylinder Nut 63 Outer Cylinder ID Lip Seal 32 Stud* 64 Outer Cylinder OD Lip Seal 33 Nut* 65 Outer Cylinder OD Lip Seal 34 Lock Ring Access Port Plug 66 Top ID Lip Seal 35 Hydraulic Port Plug 67 Top OD Lip Seal 36 Pusher Plate Screw 68 Outer Cylinder ID Lip Seal 37 Actuator Ring Stop Screw 69 Inner Cylinder OD Lip Seal 38 Lifting Eye* 75 Inner Cylinder ID Backup Ring* 39 Lifting Eye* 76 Inner Cylinder OD Backup Ring* 40 Lifting Eye* 77 Outer Cylinder ID Backup Ring* 41 Lifting Eye* 78 Top ID Backup Ring* 42 Lifting Eye* *Not shown on the illustration. **These items are sold as a subassembly (packer & donut). CAMULAR TM high-performance donuts and packers are available for most sizes and working pressures of the annular BOP. A complete replacement kit for seals, bearings and scrapers is available. See pages 153-154. TC1001-04 141 2004 Cooper Cameron, Cameron Division
D and DL Annular BOP Dimensions and Weights Size and Working Pressure Comparative Size and Weight Data (All Models Flanged) Height (inches) Diameter (inches) Weight (pounds) Gallons to Close Gallons to Open 7-1/16 3000 psi 23-15/16 27-7/8 2738 1.69 1.39 7-1/16 5000 psi 25-1/2 27-7/8 2778 1.69 1.39 7-1/16 10,000 psi 34-7/32 37-3/8 7255 2.94 2.55 7-1/16 15,000 psi 44-3/4 43-1/4 12,000 6.94 6.12 7-1/16 20,000 psi 50-3/4 48 17,716 8.38 7.56 11 3000 psi 32-1/2 41-1/4 8255 5.65 4.69 11 5000 psi 34-15/16 41-1/4 8447 5.65 4.69 11 10,000 psi 41-1/16 48-1/2 13,954 10.15 9.05 11" 15,000 psi 62-1/2 61 36,500 23.5 21.3 13-5/8 3000 psi 36-11/16 52-3/8 12,855 12.12 10.34 13-5/8 5000 psi 40-3/16 52-3/8 16,215 12.12 10.34 13-5/8 10,000 psi 49-3/32 61 27,262 18.10 16.15 16-3/4 3000 psi 47 60-1/2 25,950 22.30 19.00 16-3/4 5000 psi 49 60-1/2 26,300 22.30 19.00 18-3/4 5000 psi 60-13/16 62 29,560 35.60 29.00 18-3/4 10,000 psi 70-1/2 67 40,940 51.00 45.10 20-3/4 3000 psi 54-3/4 66 29,500 40.50 28.40 21-1/4 2000 psi 53-5/16 66 29,000 40.50 28.40 21-1/4" 5000 psi 64-27/32 71-11/16 36,000 40.50 28.40 TC1001-04 142 2004 Cooper Cameron, Cameron Division
7-1/16 3000-20,000 psi WP D and DL Annular BOP Part Numbers 7-1/16 3000and 5000 psi 7-1/16 10,000 psi 7-1/16 15,000 psi 7-1/16 20,000 psi Item Description Qty Part Number Qty Part Number Qty Part Number Qty Part Number 3 Piston 1 699333-01 1 699333-02 1 699333-10 1 699333-11 4 Inner Cylinder Head 1 699334-01-02 1 699334-02-02 1 699334-10 1 699334-11-01 5 Outer Cylinder Head 1 699335-01 1 699335-02 1 699335-10 1 699335-11 6 Pusher Plate 1 699336-01 1 699336-02 1 699336-10 1 699336-11 7 Donut and Packer** 1 644856-02-00-01+ 1 644856-03-00-02+ 1 644856-11+ 1 644856-11+ 9 Lock Ring 1 699337-01 1 699337-02 1 699337-10 1 699337-11 10 Actuator Ring 1 699338-01 1 699338-02 1 699338-10 1 699338-11 11 Actuator Screw 4 049089-03 4 049089-01 4 049089-01 4 049089-01 12 Actuator Screw Bushing 4 699343-03 4 699343-01 4 699343-01 4 699343-01 13 14 Outer Cylinder Lock Segment Lock Segment Retaining Ring -- --- -- --- -- --- 3 614350-02 -- --- -- --- -- --- 1 049416-02 15 Support Plate 1 2010341-01 1 2010341-02 1 2010341-15 1 2010341-11 16 Top Trash Seal 1 046045-19 1 046045-20 1 046045-14 1 046045-10 17 Actuator Screw Bearing 8 644868-03 8 644868-01 8 644868-01 8 644868-01 29 Anchor Shackle 4 701002 4 701003 4 663311-13 4 663311-13 30 Inner Cylinder Stud 8 046037-24 12 046037-16 12 046037-30 12 392002-09-00-70 31 Inner Cylinder Nut 8 049800-01 12 049800-01 12 049800-08 12 049800-03 32 Stud -- --- -- --- -- --- -- --- 33 Nut -- --- -- --- -- --- -- --- 34 Lock Ring Access Port Plug -- -- -- -- 2 005930-07-10 2 005930-07-10 35 Hydraulic Port Plug 2 005930-03-10 2 005930-05-10 2 005930-05-10 2 005930-05-10 36 Pusher Plate Screw 24 046052-04 24 046052-05 24 046052-08 24 046052-08 37 Actuator Ring Stop Screw 4 046052-03 4 046052-01 4 049477-01 4 046052-01 38 Lifting Eye* 4 700734 4 700734 4 012185-03 4 012185-03 39 Lifting Eye* 4 012185-03 4 012185-03 4 012185-02 4 012185-02 40 Lifting Eye* 4 012185-02 4 012185-02 4 700735 4 700735 41 Lifting Eye* 4 700735 4 700735 4 700734 2 700734 42 Lifting Eye* -- --- -- --- -- --- -- --- *Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULAR TC1001-04 143 2004 Cooper Cameron, Cameron Division
7-1/16 3000-20,000 psi WP D and DL Annular BOP Part Numbers 7-1/16 3000and 5000 psi 7-1/16 10,000 psi 7-1/16 15,000 psi 7-1/16 20,000 psi Item Description Qty Part Number Qty Part Number Qty Part Number Qty Part Number 43 Stud -- --- -- --- -- --- -- --- 44 Nut -- -- -- --- -- --- -- --- 45 Bushing Retaining Screw 4 005940-01-18 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 46 Oil Injection Fitting 4 700710 4 700710 4 700710 4 700710 47 Lifting Eye* -- --- 4 012185-01 -- --- -- --- 50 Support Plate Bearing Ring 1 049122-01 1 049122-02 1 049122-07 1 049122-07 51 Piston ID Bearing Ring 1 2010196-13 1 2010196-15 1 2010196-36 1 2010196-32 52 Inner Cyl. OD Bearing Ring 1 2010196-01 1 2010196-03 1 2010196-33 1 2010196-33 53 Outer Cyl. ID Bearing Ring 1 2010196-02 1 2010196-04 1 2010196-34 1 2010196-34 54 Piston OD Bearing Ring 1 2010196-14 1 2010196-16 1 2010196-35 1 2010196-31 55 Pusher Plate Bearing Ring 1 699345-04 1 699345-05 1 699345-08 1 699345-08 56 Outer Cyl. ID Wiper Ring 1 700713 1 700810 1 705151 1 705151 57 Inner Cyl. OD Wiper Ring 1 700715 1 700809 1 705152 1 705152 58 Inner Cylinder ID Lip Seal 1 615851-31-01 1 615850-24-01 1 615850-37-01 1 615850-37-01 59 Inner Cylinder ID Lip Seal 1 615851-32-01 1 615851-26-01 1 615851-35-01 1 615851-37-01 60 Inner Cylinder OD Lip Seal 2 615847-30-01 2 615847-26-01 1 615847-34-01 1 615847-34-01 61 Piston ID Lip Seal 1 615851-33-01 1 615851-27-01 1 615851-36-01 1 615851-36-01 62 Piston OD Lip Seal 1 615847-31-01 1 615847-27-01 1 615847-35-01 1 615847-37-01 63 Outer Cylinder ID Lip Seal 2 615851-30-01 2 615851-25-01 1 615851-34-01 1 615851-34-01 64 Outer Cylinder OD Lip Seal 1 615847-29-01 1 615847-25-01 1 615847-32-01 1 615847-36-01 65 Outer Cylinder OD Lip Seal 1 615847-28-01 1 615847-24-01 1 615847-33-01 -- -- 66 Top ID Lip Seal 1 615851-29-01 1 615850-23-01 1 615850-35-01 1 615850-35-01 67 Top OD Lip Seal 1 706258-11 1 706258-04 1 706258-01 1 706258-05 68 Outer Cylinder ID Lip Seal -- --- -- --- 1 615850-36-01 1 615850-36-01 69 Inner Cylinder OD Lip Seal -- --- -- --- 1 615846-26-01 1 615846-26-01 75 Inner Cyl. ID Backup Ring* -- --- -- --- 1 615399-09 1 615378-02 76 Inner Cyl. OD Backup Ring* -- --- -- --- 1 615399-10 1 615622-02 77 Outer Cyl. ID Backup Ring* -- --- -- --- 1 615399-08 1 615378-03 78 Top ID Backup Ring* -- --- -- --- 1 615399-07 1 615378-04 *** Complete Replacement Kit 1 049742-01 1 049742-02 1 049742-13 1 049742-03 *Not shown on the drawing +CAMULAR TC1001-04 144 2004 Cooper Cameron, Cameron Division
11 3000-15,000 psi WP D and DL Annular BOP Part Numbers 11 3000 and 5000 psi 11 10,000 psi 11 15,000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 3 Piston 1 699333-03 1 699333-04 1 699333-38-00-01 4 Inner Cylinder Head 1 699334-27 1 699334-28 1 699334-38-00-01 5 Outer Cylinder Head 1 699335-27 1 699335-28 1 699335-38-00-01 6 Pusher Plate 1 699336-03 1 699336-04 1 699336-38-00-01 7 Donut and Packer** 1 644856-04-00-02+ 1 2231480-28-00-01 1 644800-38-00-01 9 Lock Ring 1 699337-27 1 699337-28 1 699337-38-00-01 10 Actuator Ring 1 699338-27 1 699338-28 1 699338-38-00-01 11 Actuator Screw 4 049089-01 4 049089-01 4 049089-02 12 Actuator Screw Bushing 4 699343-01 4 699343-01 4 699343-02 13 Outer Cylinder Lock Segment 3 614350-03 3 614350-04 3 614350-09 14 Lock Segment Retaining Ring 1 049416-03 1 049416-04 1 049416-10 15 Support Plate 1 2010341-03 1 2010341-07 1 2010341-13 16 Top Trash Seal 1 046045-11 1 046045-12 1 046045-15 17 Actuator Screw Bearing 8 644868-01 8 644868-01 8 644868-02 29 Anchor Shackle 4 701004 4 663311-13 4 663311-13 30 Inner Cylinder Stud 6 046037-17 8 046037-19 12 046037-26 31 Inner Cylinder Nut 6 049800-04 8 049800-05 12 049800-05 32 Stud -- --- -- --- -- -- 33 Nut -- --- -- --- -- -- 34 Lock Ring Access Port Plug 2 235539-64 2 005930-07-10 2 614271-02 35 Hydraulic Port Plug 2 005930-05-10 2 005930-05-10 2 005930-05-10 36 Pusher Plate Screw 24 046052-06 24 046052-07 24 046052-10 37 Actuator Ring Stop Screw 4 049477-01 4 049477-01 4 046052-01 38 Lifting Eye* 4 011849 4 011849 -- -- 39 Lifting Eye* 4 012185-03 4 012185-03 4 012185-03 40 Lifting Eye* 2 012185-01 2 012185-02 4 012185-02 41 Lifting Eye* 4 012185-02 -- --- 4 011849 42 Lifting Eye* 2 700735 -- --- -- -- *Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULAR TC1001-04 145 2004 Cooper Cameron, Cameron Division
11 3000-15,000 psi WP D and DL Annular BOP Part Numbers 11 3000and 5000 psi 11 10,000 psi 11 15,000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 43 Stud -- --- -- --- -- -- 44 Nut -- --- -- --- -- -- 45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 46 Oil Injection Fitting 2 700594 2 700594 2 700594 47 Lifting Eye* 2 701960 -- --- -- -- 50 Support Plate Bearing Ring 1 049122-03 1 049122-04 1 049122-10 51 Piston ID Bearing Ring 1 2010196-17 1 2010196-19 1 2010196-40 52 Inner Cyl. OD Bearing Ring 1 2010196-05 1 2010196-07 1 2010196-58 53 Outer Cyl. ID Bearing Ring 1 2010196-06 1 2010196-08 1 2010196-57 54 Piston OD Bearing Ring 1 2010196-18 1 2010196-20 1 2010196-39 55 Pusher Plate Bearing Ring 1 699345-02 1 699345-06 1 699345-10 56 Outer Cyl. ID Wiper Ring 1 700619 1 700812 1 706452 57 Inner Cyl. OD Wiper Ring 1 700618 1 700811 1 706451 58 Inner Cylinder ID Lip Seal 1 615850-15-01 1 615850-40-01 1 615850-27-01 59 Inner Cylinder ID Lip Seal 1 615850-14-01 1 615850-41-01 1 615850-28-01 60 Inner Cylinder OD Lip Seal 2 615847-17-01 1 615847-38-01 2 615846-21-01 61 Piston ID Lip Seal 1 615851-16-01 1 615851-38-01 1 615850-25-01 62 Piston OD Lip Seal 1 615847-16-01 1 615847-39-01 1 615846-19-01 63 Outer Cylinder ID Lip Seal 2 615851-17-01 1 615851-37-01 2 615850-26-01 64 Outer Cylinder OD Lip Seal 1 615846-03-01 -- --- -- -- 65 Outer Cylinder OD Lip Seal 1 615846-04-01 1 615846-27-01 1 615846-20-01 66 Top ID Lip Seal 1 615850-13-01 1 615850-38-01 1 615850-29-01 67 Top OD Lip Seal 1 706258-02 1 706258-03 1 706258-14 68 Outer Cylinder ID Lip Seal -- --- 1 615850-39-01 -- -- 69 Inner Cylinder OD Lip Seal -- --- 1 615846-28-01 -- -- 75 Inner Cyl. ID Backup Ring* 2 702645-22-21 -- --- 2 702640-32-91 76 Inner Cyl. OD Backup Ring* 4 230266-01-00-16 -- --- -- -- 77 Outer Cyl. ID Backup Ring* -- --- -- --- -- -- 78 Top ID Backup Ring* -- --- -- --- -- -- *** Complete Replacement Kit 1 049742-09 1 049742-10 -- -- *Not shown on the drawing +CAMULAR TC1001-04 146 2004 Cooper Cameron, Cameron Division
13-5/8 5000-16-3/4 5000 psi WP D and DL Annular BOP Part Numbers 13-5/8 5000 psi 13-5/8 10,000 psi 16-3/4 3000 and 5000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 3 Piston 1 699333-05 1 699333-06 1 699333-18 4 Inner Cylinder Head 1 699334-05-02 1 699334-30 1 699334-18 5 Outer Cylinder Head 1 699335-05 1 699335-30 1 699335-18 6 Pusher Plate 1 699336-05 1 699336-06 1 699336-18 7 Donut and Packer** 1 644856-06-00-03 1 644856-07-00-01+ 1 644800-18-00-01+ 9 Lock Ring 1 699337-05 1 699337-30 1 699337-18 10 Actuator Ring 1 699338-05 1 699338-30 1 699338-18 11 Actuator Screw 4 049089-01 4 049089-02 4 049089-02 12 Actuator Screw Bushing 4 699343-01 4 699343-02 4 699343-02 13 14 Outer Cylinder Lock Segment Lock Segment Retaining Ring 3 614350-05 3 614350-01 3 614350-07 1 049416-05 1 049416-01 1 049416-07 15 Support Plate 1 2010341-05 1 2010341-06 1 2010341-12 16 Top Trash Seal 1 046045-01 1 046045-09 1 046045-08 17 Actuator Screw Bearing 8 644868-01 8 644868-02 8 644868-02 29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13 30 Inner Cylinder Stud 6 046037-19 12 046037-20 8 046037-25 31 Inner Cylinder Nut 6 049800-05 12 049800-05 8 049800-06 32 Stud -- --- -- --- -- --- 33 Nut -- --- -- --- -- --- 34 Lock Ring Access Port Plug 2 005930-07-10 2 005930-08-10 2 614271-01 35 Hydraulic Port Plug 2 005930-05-10 2 005930-06-10 2 005930-06-10 36 Pusher Plate Screw 24 046052-08 24 046052-09 24 046052-09 37 Actuator Ring Stop Screw 4 046052-01 4 046052-02 4 046052-02 38 Lifting Eye* 4 011849 4 011849 4 011849 39 Lifting Eye* 4 012185-03 4 700649 4 012185-02 40 Lifting Eye* 4 012185-02 2 012185-01 4 012185-01 41 Lifting Eye* -- --- 4 012185-03 4 700446 42 Lifting Eye* -- --- 2 700446 -- --- *Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULAR TC1001-04 147 2004 Cooper Cameron, Cameron Division
13-5/8 5000-16-3/4 5000 psi WP D and DL Annular BOP Part Numbers 13-5/8 5000 psi 13-5/8 10,000 psi 16-3/4 3000 and 5000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 43 Stud -- --- -- --- -- --- 44 Nut -- --- -- --- -- --- 45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 46 Oil Injection Fitting 4 700594 2 700594 2 700594 47 Lifting Eye* -- --- -- --- -- --- 50 Support Plate Bearing Ring 1 049122-05 1 049122-06 1 049122-08 51 Piston ID Bearing Ring 1 2010196-21 1 2010196-23 1 2010196-38 52 Inner Cyl. OD Bearing Ring 1 2010196-09 1 2010196-11 1 2010196-25 53 Outer Cyl. ID Bearing Ring 1 2010196-10 1 2010196-12 1 2010196-26 54 Piston OD Bearing Ring 1 2010196-22 1 2010196-24 1 2010196-37 55 Pusher Plate Bearing Ring 1 699345-01 1 699345-03 1 699345-07 56 Outer Cyl. ID Wiper Ring 1 700320 1 700319 1 700994 57 Inner Cyl. OD Wiper Ring 1 700581 1 700320 1 700993 58 Inner Cylinder ID Lip Seal 1 615850-21-01 1 615850-32-01 1 615850-44-01 59 Inner Cylinder ID Lip Seal 1 615850-20-01 1 615850-33-01 1 615850-45-01 60 Inner Cylinder OD Lip Seal 2 615847-22-01 1 615847-40-01 2 615846-27-01 61 Piston ID Lip Seal 1 615851-23-01 1 615850-30-01 1 615850-46-01 62 Piston OD Lip Seal 1 615847-21-01 1 615846-22-01 1 615846-29-01 63 Outer Cylinder ID Lip Seal 2 615851-24-01 2 615850-31-01 1 615850-43-01 64 Outer Cylinder OD Lip Seal 1 615846-10-01 1 615846-23-01 -- --- 65 Outer Cylinder OD Lip Seal 1 615846-11-01 1 615846-24-01 -- -- 66 Top ID Lip Seal 1 615850-19-01 1 615850-34-01 1 615850-42-01 67 Top OD Lip Seal 1 706258-07 1 706258-10 1 706258-09 68 Outer Cylinder ID Lip Seal -- --- 1 615851-28-01 -- --- 69 Inner Cylinder OD Lip Seal -- --- 1 615846-25-01 -- --- 75 Inner Cyl. ID Backup Ring* -- --- -- --- -- --- 76 Inner Cyl. OD Backup Ring* -- --- -- --- -- --- 77 Outer Cyl. ID Backup Ring* -- --- -- --- -- --- 78 Top ID Backup Ring* -- --- -- --- -- --- *** Complete Replacement Kit 1 049742-06 1 049742-12 1 049742-08 *Not shown on the drawing +CAMULAR TC1001-04 148 2004 Cooper Cameron, Cameron Division
18-3/4 5000-18-3/4" 10,000 psi WP D and DL Annular BOP Part Numbers Item Description 18-3/4 5000 psi 18-3/4 10,000 psi Qty Part Number Qty Part Number 3 Piston 1 699333-44 1 699333-21 4 Inner Cylinder Head 1 699334-44 1 699334-21 5 Outer Cylinder Head 1 699335-44 1 699335-21 6 Pusher Plate 1 699336-44 1 699336-21 7 Donut and Packer** 1 2231480-09-00-01 1 644856-01-00-01+ 9 Lock Ring 1 699337-44 1 699337-21 10 Actuator Ring 1 699338-44 1 699338-21 11 Actuator Screw 4 049089-04 4 049089-02 12 Actuator Screw Bushing 4 699343-04 4 699343-02 13 Outer Cylinder Lock Segment 3 614350-13 3 614350-06 14 Lock Segment Retaining Ring 1 049416-09 1 049416-06 15 Support Plate 1 2010341-17 1 615483-01 16 Top Trash Seal 1 046045-22 1 046045-16 17 Actuator Screw Bearing 8 644868-02 8 644868-02 29 Anchor Shackle 4 663311-13 4 663311-13 30 Inner Cylinder Stud 16 046037-32 16 046037-27 31 Inner Cylinder Nut 16 049800-07 16 049800-07 32 Stud -- --- -- --- 33 Nut -- --- -- --- 34 Lock Ring Access Port Plug 2 614271-02 2 614271-01 35 Hydraulic Port Plug 2 005930-06-10 2 005930-07-10 36 Pusher Plate Screw 24 046052-14 24 644535-01 37 Actuator Ring Stop Screw 4 046052-02 4 046052-02 38 Lifting Eye* 4 011849 4 011849 39 Lifting Eye* 4 700649 4 700649 40 Lifting Eye* 2 012185-03 1 615484-01^ 41 Lifting Eye* 4 012185-02 4 012185-02 42 Lifting Eye* -- --- -- --- *Not shown on the drawing **These items are sold as a subassembly (packer & donut) ***Exploded view is not representative of this assembly +CAMULAR ^Wear Plate - Not Lifting Eye TC1001-04 149 2004 Cooper Cameron, Cameron Division
18-3/4 5000-18-3/4 10,000 psi WP D and DL Annular BOP Part Numbers 18-3/4 5000 psi 18-3/4 10,000 psi Item Description Qty Part Number Qty Part Number 43 Stud -- --- -- --- 44 Nut -- --- -- --- 45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08 46 Oil Injection Fitting 4 700594 2 700594 47 Lifting Eye* -- --- -- --- 50 Support Plate Bearing Ring 1 049122-11 1 615482-01 51 Piston ID Bearing Ring 1 2010196-49 1 2010196-29 52 Inner Cyl. OD Bearing Ring 1 2010196-50 1 2010196-47 53 Outer Cyl. ID Bearing Ring 1 2010196-51 1 2010196-48 54 Piston OD Bearing Ring 1 2010196-52 1 2010196-30 55 Pusher Plate Bearing Ring 1 699345-14 1 699345-13 56 Outer Cyl. ID Wiper Ring 1 708000 1 705710 57 Inner Cyl. OD Wiper Ring 1 708003 1 705711 58 Inner Cylinder ID Lip Seal 1 615851-01-01 1 615851-02-01 59 Inner Cylinder ID Lip Seal 1 615850-04-01 1 615850-08-01 60 Inner Cylinder OD Lip Seal 2 615846-05-01 2 615846-16-01 61 Piston ID Lip Seal 1 615850-03-01 1 615850-09-01 62 Piston OD Lip Seal 1 615846-01-01 1 615846-15-01 63 Outer Cylinder ID Lip Seal 2 615850-02-01 2 615850-07-01 64 Outer Cylinder OD Lip Seal 1 615846-02-01 -- --- 65 Outer Cylinder OD Lip Seal 1 615850-01-01 1 615846-14-01 66 Top ID Lip Seal 1 706258-13 1 615850-01-01 67 Top OD Lip Seal 1 702645-32-91 1 2724543-01 68 Outer Cylinder ID Lip Seal -- -- -- --- 69 Inner Cylinder OD Lip Seal -- -- -- --- 75 Inner Cyl. ID Backup Ring* -- -- 2 702645-32-91 76 Inner Cyl. OD Backup Ring* -- -- -- --- 77 Outer Cyl. ID Backup Ring* -- -- -- --- 78 Top ID Backup Ring* -- -- 1 615378-01 *** Complete Replacement Kit 1 049742-16 1 049742-17 TC1001-04 150 2004 Cooper Cameron, Cameron Division
20-3/4 3000-21-1/4 5000 psi WP D and DL Annular BOP Part Numbers 20-3/4 *** 3000 psi 21-1/4 *** 2000 psi 21-1/4 *** 5000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 3 Piston 1 699333-47-00-02 1 699333-47-00-02 1 699333-47-00-02 4 Inner Cylinder Head 1 699334-47 1 699334-47 1 699334-47-00-02 5 Outer Cylinder Head 1 644172-01-00-02 1 644172-01-00-02 1 644172-01-00-02 6 Pusher Plate 1 699336-47-00-02 1 699336-47-00-02 1 699336-47-00-02 7 Donut and Packer** 1 644800-47-00-02+ 1 644800-47-00-02+ 1 2231480-48 9 Lock Ring -- --- -- --- -- -- 10 Actuator Ring -- --- -- --- -- -- 11 Actuator Screw -- --- -- --- -- -- 12 Actuator Screw Bushing -- --- -- --- -- -- 13 Outer Cylinder Lock Segment -- --- -- --- -- -- 14 Lock Segment Retaining Ring -- --- -- --- -- -- 15 Support Plate 1 2010341-18 1 2010341-18 1 2010341-18 16 Top Trash Seal -- --- -- --- -- -- 17 Actuator Screw Bearing -- --- -- --- -- -- 29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13 30 Inner Cylinder Stud 16 046037-34 12 046037-34 16 046037-34 31 Inner Cylinder Nut 16 049800-12 12 049800-12 16 049800-12 32 Stud 20 005919-08-10 24 006306-16-10 20 219067-18-11-51 33 Nut 20 270900-18-09 24 2709000-15-09 20 2709000-18-01 34 Lock Ring Access Port Plug 2 005930-06-10 2 005930-16-10 2 005930-06-10 35 Hydraulic Port Plug -- --- -- --- -- -- 36 Pusher Plate Screw 24 046052-15 24 046052-15 24 046052-15 37 Actuator Ring Stop Screw 4 046052-16 4 046052-16 16 046052-16 38 Lifting Eye* 2 700649 2 700649 2 700649 39 Lifting Eye* 2 012185-02 4 012185-02 2 012185-02 40 Lifting Eye* -- --- -- --- -- -- 41 Lifting Eye* -- --- -- --- -- -- 42 Lifting Eye* -- --- -- --- -- -- *Not shown on the drawing **These items are sold as a subassembly (packer & donut) ***Exploded view is not representative of this assembly +CAMULAR TC1001-04 151 2004 Cooper Cameron, Cameron Division
20-3/4 3000-21-1/4 5000 psi WP D and DL Annular BOP Part Numbers 20-3/4 *** 3000 psi 21-1/4 *** 2000 psi 21-1/4 *** 5000 psi Item Description Qty Part Number Qty Part Number Qty Part Number 43 Stud 36 615447-01-10 24 615447-02-10 44 Nut 36 2709000-19-09 24 2709000-19-09 36 2011346-26-05 45 Bushing Retaining Screw -- --- -- --- 36 2011924-01 46 Oil Injection Fitting -- --- -- --- -- -- 47 Lifting Eye* -- --- -- --- -- -- 50 Support Plate Bearing Ring 1 049122-12 1 049122-12 1 049122-12 51 Piston ID Bearing Ring 1 2010196-53 1 2010196-53 1 2010196-53 52 Inner Cyl. OD Bearing Ring 1 2010196-54 1 2010196-54 1 2010196-54 53 Outer Cyl. ID Bearing Ring 1 2010196-55 1 2010196-55 1 2010196-55 54 Piston OD Bearing Ring 1 2010196-56 1 2010196-56 1 2010196-56 55 Pusher Plate Bearing Ring -- --- -- --- -- -- 56 Outer Cyl. ID Wiper Ring 1 708843 1 708843 1 708843 57 Inner Cyl. OD Wiper Ring 1 615399-12 1 615399-12 1 615399-12 58 Inner Cylinder ID Lip Seal 1 615851-03-01 1 615851-03-01 1 615851-03-01 59 Inner Cylinder ID Lip Seal 1 615851-03-01 1 615850-12-01 1 615850-12-01 60 Inner Cylinder OD Lip Seal 1 615850-12-01 1 615846-18-01 2 615846-18-01 61 Piston ID Lip Seal 1 615850-11-01 1 615850-11-01 1 615850-11-01 62 Piston OD Lip Seal 1 615846-17-01 1 615846-17-01 1 615846-17-01 63 Outer Cylinder ID Lip Seal -- --- -- --- -- -- 64 Outer Cylinder OD Lip Seal -- -- -- -- 65 Outer Cylinder OD Lip Seal 2 615850-10-01 2 615850-10-01 2 615850-10-01 66 Top ID Lip Seal -- --- -- --- -- -- 67 Top OD Lip Seal -- --- -- --- -- -- 68 Outer Cylinder ID Lip Seal -- --- -- --- 2 2752121-20-22 69 Inner Cylinder OD Lip Seal -- --- -- --- -- -- 75 Inner Cyl. ID Backup Ring* -- --- -- --- -- -- 76 Inner Cyl. OD Backup Ring* -- --- -- --- -- -- 77 Outer Cyl. ID Backup Ring* -- --- -- --- -- -- 78 Top ID Backup Ring* -- --- -- --- -- -- *** Complete Replacement Kit 1 049742-18 1 049742-18 TC1001-04 152 2004 Cooper Cameron, Cameron Division
DL Annular BOP Replacement Part Kits For popular size DL BOPs, a BOP replacement parts kit is available to provide all seals, bearings and scrapers required during normal maintenance. Kit parts are shrink-film packed to prevent loss and assure long shelf life and are less expensive than individual parts. All parts in each kit are identified with part numbers and parts list index numbers. As an optional replacement for the standard lip seal design, a D-shaped seal is available for service in annular BOPs that have pitted, corroded or oversized seal grooves. To enhance the performance life of the used annular BOP, this seal design will fill most voids created by excessive wear and tear to the seal groove. Seal kits have been created which include all the operating system seals for the annular BOPs listed below. Annular BOP Replacement Part Kit Part Numbers BOP Size Pressure Rating (psi) Replacement Kit D Seal Kit 7-1/16 3000, 5000 049742-01 --- 7-1/16 10,000 049742-02 --- 7-1/16 15,000 049742-13 --- 7-1/16 20,000 049742-03 --- 11 3000, 5000 049742-09 --- 11 10,000 049742-10 --- 11" 15,000 049742-14 --- 13-5/8 5000 049742-11 2010006-01 13-5/8 10,000 049742-12 2010006-05 16-3/4 3000, 5000 049742-08 --- 18-3/4 5000 049742-16 2010006-04 18-3/4" (Dual) 5000 049742-16-01 2010006-04 18-3/4 10,000 049742-17 2010006-03 20-3/4 3000 049742-18 --- 21-1/4 2000 049742-18 --- 21-1/4" 5000 049742-18 --- TC1001-04 153 2004 Cooper Cameron, Cameron Division
Replacement Part Kit Components Item Number Quantity Description 16 1 Top Trash Seal 17 8 Actuator Screw Bearing 50 1 Inner Cylinder Head Ring 51 1 Bearing 52 1 Bearing 53 1 Bearing 54 1 Bearing 55 1 Wear Ring 56 1 Wiper Ring 57 1 Wiper Ring 58 1 Seal Ring 59 1 Seal Ring 60 2 Seal Ring 61 1 Seal Ring 62 1 Seal Ring 63 2 Seal Ring 64 1 Seal Ring 65 1 Seal Ring 66 1 Seal Ring 67 1 Seal Ring TC1001-04 154 2004 Cooper Cameron, Cameron Division
Annular Stripper Packer Cameron s Stripper Packer is designed to permit stripping of a 6-5/8 drill pipe and tool joint through the Cameron DL Annular. To accomplish the stripping function, the packer metal inserts tips have been cut back to allow the drill pipe to pass through the closed packer without contacting the metal inserts. This special packer is not rated for 10,000 psi service on any size drill pipe because the tops of the anti-extrusion inserts have been cut back. Because this is a special service packing element, it is not tested in accordance with API 16A. Annular BOP Stripper Packer BOP Size Pressure Rating (psi) Stripper Packer 18-3/4" 10,000** 2164645-01 **Packer is designed for the 18-3/4" 10,000 DL Annular, but is not rated for 10,000 psi service. Pressure testing of the packing element is limited to 5000 psi on 5" and 6-5/8" drill pipe mandrels. Severe Service Annular Packer Cameron s Severe Service Annular Packing element subassemblies are designed for elevated temperatures (maximum of 250 degrees F.) and up to 35% H2S. The severe service packers/donuts are molded using CAMLAST elastomers. Limited sizes and working pressure are available. Severe Service Annular BOP Packer/Donut Subassembly BOP Size Pressure Rating (psi) Stripper Packer 13-5/8" 5000 644906-06-00-01 Higher Temperatures For temperatures greater than 250 O F, and high H 2 S levels, CAMULAR severe service elastomer is recommended. The DL Annular BOP packing element comes only as a complete subassembly, which includes packer and donut. Contact your local Cameron representative for details. CAMULAR part numbers are listed on pages 129-136. Please contact your local Cameron Representative for severe service packer information. TC1001-04 155 2004 Cooper Cameron, Cameron Division