WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale. Copyright 2012,, All Rights Reserved Offer of Sale 4.19.II
TRANSMISSION INDEX P.T.O. Number Teeth in Transmission Make and Model Appl. Forward P.T.O. Number Speeds Driver BDSL-132R RNT-1 10 R33 BDSL-181 (MACK-T1060) RNT-1 6 R33 BDSL-2052R RNT-1 10 R33 BDSL-2142 RNT-2 5 R53 BDSL-2142R (MACK-T1100) RNT-2 10 R53 G409-0 (MACK-T1090) RNT-6 9 R53 IMPORTANT: See Safety Information in Section 1 of the Chelsea Applications catalog HY25-3000/US. Transmission P.T.O. Driver & Aperatures (Viewed from Rear of Transmission) 4.19.1 L-Left Side R-Right Side B-Bottom Side T-Top Side For transmission not listed, contact your authorized Chelsea Distributor.
RNT-1 T1060 BDSL-132R BDSL-181 BDSL-2052R RIGHT SIDE ONLY TRANSMISSION GEAR DATA: R.H. 06-Bolt Opening Gear FORWARD of Centerline 33 Teeth - R.H. HELIX PITCH LINE TO APERTURE FACE: 1.1980" (30.4300MM) Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M. RIGHT Side ONE SPEED - TWO GEAR - MECHANICAL SHIFT 442LLDHX-*3 (1) 250 Opp 63 7-A-125 442LQDHX-*3 (1) 225 Opp 68 7-A-125 442LRDHX-*3 (1) 442LSDHX-*3 (1) 442LUDHX-*3 (1) 442LWDHX-*3 (1) 442LXDHX-*3 (1) ONE SPEED - FORWARD & REVERSE ONE SPEED - DUAL SHAFT 225 Opp 79 7-A-125 200 Opp 94 7-A-125 195 Opp 112 7-A-125 175 Opp 131 7-A-125 140 Opp 156 7-A-125 352LSDHX-*3 (1) 140 Opp 95 123 7-A-125 452LSDHX-*3 (1) 140 Opp 95 7-A-125 NOTE: No adapters available for this application. (1) Input Gear Part No. 5-P-1041 4.19.2
T1100 BDSL-2142 BDSL-2142R RNT-2 RIGHT SIDE ONLY TRANSMISSION GEAR DATA: R.H. 06-Bolt Opening Gear FORWARD of Centerline 53 Teeth - R.H. HELIX PITCH LINE TO APERTURE FACE:.4360" (11.0700MM) Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M. RIGHT Side ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT 100XRDJX-*3 (1) 125 Eng 126 7-A-550 7170-62X ONE SPEED - TWO GEAR - MECHANICAL SHIFT 442KFDJX-*3 (2) 250 Opp 72 7-A-125 442KLDJX-*3 (3) 442KQDJX-*3 (3) 442KRDJX-*3 (3) 442KSDJX-*3 (3) 442KUDJX-*3 (3) 442KWDJX-*3 (3) 442KXDJX-*3 (3) 250 Opp 93 7-A-125 225 Opp 100 7-A-125 225 Opp 116 7-A-125 200 Opp 138 7-A-125 195 Opp 164 7-A-125 175 Opp 193 7-A-125 140 Opp 228 7-A-125 NOTE: No adapters available for this application. (1) Gear and Shaft Kit No. KXA-2-P-609 (2) Input Gear Part No. 5-P-1086 (3) Input Gear Part No. 5-P-1042 4.19.3
RNT-6 T1090 G409-0 RIGHT SIDE ONLY TRANSMISSION GEAR DATA: R.H. 06-Bolt Opening Gear FORWARD of Centerline 53 Teeth - R.H. HELIX PITCH LINE TO APERTURE FACE:.4500" (11.4300MM) Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M. RIGHT Side ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT 100XRDJX-*3 (1) 125 Eng 137 7-A-550 7170-62X ONE SPEED - TWO GEAR - MECHANICAL SHIFT 442KFDJX-*3 (2) 250 Opp 78 7-A-125 442KLDJX-*3 (3) 442KQDJX-*3 (3) 442KRDJX-*3 (3) 442KSDJX-*3 (3) 442KUDJX-*3 (3) 442KWDJX-*3 (3) 442KXDJX-*3 (3) ONE SPEED - FORWARD & REVERSE 250 Opp 101 7-A-125 225 Opp 109 7-A-125 225 Opp 126 7-A-125 200 Opp 150 7-A-125 195 Opp 178 7-A-125 175 Opp 210 7-A-125 140 Opp 248 7-A-125 340SFDJX-*3 (4) 200 Opp 71 75 7-A-800 NOTE: No adapters available for this application. (1) Gear and Shaft Kit No. KXA-2-P-609 (2) Input Gear Part No. 5-P-1086 (3) Input Gear Part No. 5-P-1042 (4) Input Gear Part No. 5-P-921 4.19.4