WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne with NSI/WW C0. Fittings onform to NSI/WW C110/21.10 for enter-to-end dimensions. Wll thikness per NSI/WW C153/21.53 or NSI/WW C110/21.10. Fittings rted to 350 psi for sizes 3"-12", 250 psi for sizes 14"-24" nd 150 psi for sizes 30"-3". Sizes 3"-12" U, UC listed nd Ftory Mutul pproved. The Stndrd sphlti sel ot pplied on ement lining is U/NSI /NSF Stndrds 1 nd 372 pproved. ll fittings re U/NSI/NSF Stndrds 1 nd 372 pproved. MTERI SPECIFICTIONS: Mteril: Dutile Iron per STM 53 Grde 4-45-12 Interior lining: Cement lined per NSI/WW C104/21.4 sizes 3" single thikness nd 4"-3" doule thikness nd sphlti sel oted Exterior oting: Rust inhiitor prime ot OPTION COTINGS (Plese hek one): Tneme Series 37-77 Tneme Series 90-97 Tneme Series 10 Tneme Series 20 Tneme Series 104 Tneme Series 1 Tneme Series Tneme Series 135 Col Tr Epoxy Tneme Series 9 Tneme Series Other plese ontt Str Pipe Produts for vilility OPTION ININGS (Plese hek one): *(ll speil oting options re non-nellle nd non-refundle) Unlined Cement ined Glss ined Proteto 401 Fusion onded Epoxy Other plese ontt Str Pipe Produts for vilility *(ll speil oting options re non-nellle nd non-refundle) REGISTERED TRDEMRK OF STR PRODUCTS Pge 1 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form WW Grooved Fittings TECNIC INFORMTION T E-C 90º.R. EOW E-1C 90º EOW E-2C 45º EOW E-3C E-4C 22 1/2º EOW 11 1/4º EOW K-1C CP CTU PPROX. PPROX. PPROX. PPROX. PPROX. T MX. OWE TP PPROX. 3 80 3.9 100. 7.75 197 19 8. 10 4.5 3.00 7 7 3.2 3.00 7 8 3. 3.00 7 9 4.1 1.07 27 2 1/2 3 1.4 4 100 4.80 121.9 21 9.5.50 15 15.8 4.00 102 10 4.5 4.00 102 11 5.0 4.00 102 11 5.0 1.07 27 3 4 1.8 150.90 175.3 11.50 292 43 19.5 28 12.7 5.00 127 22 10.0 5.00 127 25 11.3 5.00 127 21 9.5 1.07 27 5 7 3.2 8 200 9.05.9 14.00 35 75 34.0 44 20.0 35 15.9 39 17.7 39 17.7 1.31 33 15.8 10 250 11.10 281.9 1.50 419 114 51.7 72 32.7.50 15 53 24.0.50 15 54 24.5.50 15 77 34.9 1.39 35 22 10.0 12 300 13.20 335.3 1 483 150 8.0 99 44.9 7.50 7 34.5 7.50 77 34.9 7.50 120 54.4 1.39 35 34 15.4 14 350 15.30 388. 21.50 54 21 118.4 14.00 35 15 74.8 7.50 92 41.7 7.50 92 41.7 7.50 101 45.8 1.39 35 43 19.5 1 400 17.40 442.0 24.00 10 337 152.9 207 93.9 124 5.2 112 50.8 121 54.9 1.75 45 85 38.5 18 450 19.50 495.3 2.50 73 451 204. 1.50 419 330 149.7 8.50 21 8. 8.50 21 145 5.8 8.50 21 14.2 1.75 45 103 4.7 20 500 21.0 548. 2 737 588 2.7 1 424 192.3 9.50 241 258 117.0 9.50 241 200 90.7 9.50 241 202 91. 1.75 45 120 54.4 24 00 25.80 55.3 34.00 84 909 412.3 22.00 559 4 293.0 409 185.5 282 127.9 284 128.8 1.75 45 180 81. 30 750 32.00 72.0 41.50 1054 213 98.9 25.00 35 1145 519.4 114 519.8 81 308.9 99 317.1 4.00 102 323 14.5 3 900 38.30 914.4 4 1245 3120 1415.2 2 711 197 79.7 1 122 572.4 1 975 442.3 1 1124 509.8 4.00 102 554 251.3 *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge 2
WW Grooved Sumittl Form WW Grooved Fittings T-1C TEE -1C TRUE WE X-1C CROSS -1C 45º TER CTU PPROX. PPROX. PPROX. PPROX. 3 80 4 100 150 8 200 10 250 12 300 14 350 1 400 18 450 20 500 24 00 30 750 3 900 3.9 100. 4.80 121.9.90 175.3 9.05.9 11.10 281.9 13.20 335.3 15.30 388. 17.40 442 19.50 495.3 21.0 548. 25.80 55.3 32.00 72.0 38.30 914.4.50 15 14.00 35 1.50 419 1 22.00 559 25.00 35 2 711 1 7.3 22 10.0 42 19.1 5 29.5 122 55.3 11 73.0 221 100.2 290 131.5 41 209.1 589 27.2 980 444.5 1505 82. 2175 98..50 15 14.00 35 1.50 419 1 22.00 559 25.00 35 2 711 3.00 7 3.50 89 4.50 114 5.00 127.00 152.50 15 7.00 178 10.00 254 15.25 387 25 11.4 55 24.9 90 40.8 3.5 220 99.8 315 142.9 425 192.8 555 251.7 720 32. 910 412.8 1135 514.8 1700 771.1 2300 1043.3.50 15 14.00 35 1.50 419 1 22.00 559 25.00 35 2 711 24 10.9 28 12.7 4 29.0 81 3.7 127 57. 15 70.8 307 139.3 42 193.2 57 257.2 717 325.2 1177 533.9 13 19. 1885 855.0 10.0 254 14.50 38 17.50 445 20.50 521 24.50 22 27.00 8 30.00 72 32.00 813 35.00 889 40.50 1029 4 1245 5.00 1422 3.00 7 3.00 7 3.50 89 4.50 114 5.00 127.00 152.50 15 7.00 178 10.00 254 15.25 387 21 9.5 34 15.4 4 29.0 104 47.2 145 5.8 225 102.1 43 197.8 592 28.5 754 342.1 989 448. 1519 89.0 3280 1487.8 5020 2277.0 T-1C TEE PPROX. 4 X 4 X 100 X 100 X 150 X X 8 150 X 150 X 200 8 X 8 X 10 200 X 200 X 250 10 X 10 X 12 250 X 250 X 300 47 21.3 79 35.8 14 74.4 22 102.5 *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS Pge 3 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form WW Grooved Fittings T-2C REDUCING TEE + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. PPROX. -2C 45º REDUCING TER PPROX. X-2C REDUCING CROSS PPROX. 4 X 3.50.50 2 3.00 45.50.50 22 100 X 80 15 15 11.8 7.0 20.4 15 15 10.0 X 3 53 14.50 3.50 52 4 150 X 80 24.0 38 89.0 23. 20.9 X 4 42 14.50 3.50 55 38 X 100 19.0 38 89.0 24.9 17.2 8 X 3 57 + + + + + + 200 X 80 25.8 + + + + + + X 4 2 17.50 4.50 88 7 X 100 28.1 445 114 39.9 34.5 X 7 17.50 4.50 93 82 X 150 30.4 445 114 42.1 37.2 10 X 4 94 20.50 5.00 120 120 250 X 100 42. 521 127 54.4 54.5 X 101 20.50 5.00 124 114 X 150 45.8 521 127 5.2 51.7 X 8 119 20.50 5.00 133 123 X 200 54.0 521 127 0.3 5.8 12 X 4 112 24.50 175 174 300 X 100 50.8 22 79.4 78.9 X 127 24.50 180 130 X 150 57. 22 81. 59.0 X 8 134 24.50 18 139 X 200 0.8 22 84.4 3.1 X 10 153 24.50 19 154 X 250 9.4 22 88.9 9.9 14 X 14.00 14.00 194 27.00.00 330 14.00 14.00 215 350 X 150 35 35 88.0 8 152 149.7 35 35 97.5 X 8 14.00 14.00 199 27.00.00 34 14.00 14.00 221 X 200 35 35 90.3 8 152 15.9 35 35 100.2 X 10 14.00 14.00 258 27.00.00 540 14.00 14.00 235 X 250 35 35 117.0 8 152 244.9 34 34 10. X 12 14.00 14.00 27 27.00.00 25 14.00 14.00 244 X 300 35 35 121.2 8 152 283.5 35 35 110.7 1 X 231 30.00.50 570 2 400 X 150 104.8 72 15 258.5 120.7 X 8 23 30.00.50 585 27 X 200 107.0 72 15 25.4 125.2 X 10 24 30.00.50 30 291 X 250 111. 72 15 285.8 132.0 X 12 29 30.00.50 50 X 300 122.0 72 15 294.8 138.3 X 14 341 30.00.50 92 280 X 350 154.7 72 15 313.9 127.0 18 X 13.00 1 320 + + + + + + 450 X 150 330 394 145.1 + + + + + + X 8 13.00 1 311 + + + 1 1 272 X 200 330 394 141.1 + + + 394 394 123.4 X 10 13.00 1 332 32.00 7.00 75 1 1 277 X 250 330 394 150. 813 178 347.0 394 394 125. X 12 13.00 1 332 32.00 7.00 800 1 1 291 X 300 330 394 150. 813 178 32.9 394 394 132.0 X 14 1.50 1.50 409 32.00 7.00 85 1.50 1.50 31 X 350 419 419 185.5 813 178 392.4 419 419 13.7 X 1 1.50 1.50 453 32.00 7.00 895 1.50 1.50 37 X 400 419 419 205.5 813 178 40.0 419 419 1.5 *ll dimensions in lue text (elow numer) re in millimeters exept where indited. (Con t) REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge 4
WW Grooved Sumittl Form WW Grooved Fittings T-2C REDUCING TEE PPROX. -2C 45º REDUCING TER PPROX. X-2C REDUCING CROSS PPROX. 20 X 14.00 17.00 407 + + + + + + 500 X 150 35 432 184. + + + + + + X 8 14.00 17.00 412 + + + 17.00 17.00 343 X 200 35 432 18.9 + + + 432 432 155. X 10 14.00 17.00 419 + + + 17.00 17.00 343 X 250 35 432 190.1 + + + 432 432 155. X 12 14.00 17.00 42 35.00 1000 17.00 17.00 357 X 300 35 432 193.2 889 453. 432 432 11.9 X 14 14.00 17.00 443 35.00 102 17.00 17.00 327 X 350 35 432 200.9 889 481.7 432 432 148.3 X 1 1 1 571 35.00 1105 1 1 458 X 400 259.0 889 501.2 207.7 X 18 1 1 584 35.00 1150 1 1 49 X 450 24.9 889 521. 212.7 24 X 1 534 + + + + + + 00 X 150 483 242.2 + + + + + + X 8 1 540 + + + + + + X 200 483 244.9 + + + + + + X 10 1 549 + + + + + + X 250 483 249.0 + + + + + + X 12 1 593 + + + 1 475 X 300 483 29.0 + + + 483 215.5 X 14 1 10 40.50 1510 1 450 X 350 483 27.7 1029 84.9 483 204.1 X 1 1 574 40.50 1580 1 44 X 400 483 20.4 1029 71.7 483 202.3 X 18 22.00 22.00 820 40.50 871 22.00 22.00 782 X 450 559 559 371.9 1029 395.1 559 559 354.7 X 20 22.00 22.00 937 40.50 1705 22.00 22.00 788 X 500 559 559 425.0 1029 773.4 559 559 357.4 30 X 1 23.00 870 + + + + + + 750 X 150 584 394. + + + + + + X 8 1 23.00 875 + + + + + + X 200 584 39.9 + + + + + + X 10 1 23.00 880 + + + + + + X 250 584 399.2 + + + + + + X 12 1 23.00 890 4 10.00 2178 1 23.00 888 X 300 584 403.7 1245 254 987.9 584 402.8 X 14 1 23.00 900 4 10.00 2208 1 23.00 853 X 350 584 408.2 1245 254 1001.5 584 38.9 X 1 1 23.00 912 4 10.00 2248 1 23.00 843 X 400 584 413.7 1245 254 1019.7 584 382.4 X 18 1 23.00 927 4 10.00 4 1 23.00 839 X 450 584 420.5 1245 254 1040.5 584 380. X 20 1 23.00 942 4 10.00 2339 1 23.00 835 X 500 584 427.3 1245 254 101.0 584 378.7 X 24 25.00 25.00 1475 4 10.00 2451 1 23.00 1304 X 00 35 35 9.0 1245 254 1111.8 584 591.5 3 X 8 20.00 2.00 1410 + + + + + + 900 X 200 508 0 39. + + + + + + X 10 20.00 2.00 1415 + + + + + + X 250 508 0 41.8 + + + + + + X 12 20.00 2.00 1420 + + + 20.00 2.00 122 X 300 508 0 44.1 + + + 508 572.4 X 14 20.00 2.00 1425 54.00 15.25 3200 20.00 2.00 1222 X 350 508 0 4.4 1372 387 1451.5 508 554.3 X 1 20.00 2.00 1430 54.00 15.25 3493 20.00 2.00 1213 X 400 508 0 48. 1372 387 1584.4 508 550.2 X 18 20.00 2.00 1435 54.00 15.25 3533 20.00 2.00 1204 X 450 508 0 50.9 1372 387 102.5 508 54.1 X 20 20.00 2.00 1440 54.00 15.25 3574 20.00 2.00 1190 X 500 508 0 53.2 1372 387 121.1 508 539.8 X 24 20.00 2.00 1445 54.00 15.25 375 20.00 2.00 113 X 00 508 0 55.4 1372 387 1.5 508 527.5 X 30 2 2 2113 5.00 15.25 3879 2 2 185 X 750 711 711 958.4 1422 387 1759.5 711 711 845.9 + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS Pge 5 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form WW Grooved Fittings R-1C CONC. REDUCER R-2C ECC. REDUCER E-5C 90º RED. E E-7C 90º.R. RED. E REGISTERED TRDEMRK OF STR PRODUCTS PPROX. PPROX. PPROX. PPROX. 4 X 3 7.00 8 7.00 9.50 17 20 100 X 80 178 3. 178 4.1 15 7.7 8.1 X 3 15 20 25 11.50 3 150 X 80.8 9.1 11.3 292 1.3 X 4 1 17 27 11.50 40 X 100 7.3 7.7 12.2 292 18.1 8 X 3 33 30 + + + + 200 X 80 15.0 13. + + + + X 4 28 28 40 14.00 0 X 100 12.7 12.7 18.1 35 27.2 X 30 30 43 14.00 71 X 150 13. 13. 19.5 35 32.2 10 X 4 3 35 55 1.50 90 250 X 100 1.3 15.9 24.9 419 40.8 X 42 39 0 1.50 10 X 150 19.1 17.7 27.2 419 48.1 X 8 4 43 5 1.50 121 X 200 20.9 19.5 29.5 419 54.9 12 X 4 14.00 49 14.00 50 70 + + 300 X 100 35 22.2 35 22.7 31.8 + + X 14.00 53 14.00 54 75 1 143 X 150 35 24.0 35 24.5 34.0 483 4.9 X 8 14.00 7 14.00 58 84 1 13 X 200 35 30.4 35 2.3 38.1 483 73.9 X 10 14.00 73 14.00 70 92 1 188 X 250 35 33.1 35 31.8 41.7 483 85.3 14 X 1.00 80 1.00 81 14.00 112 + + 350 X 150 40 3.3 40 3.7 35 50.8 + + X 8 1.00 8 1.00 88 14.00 127 21.50 183 X 200 40 39.0 40 40.0 35 57. 54 83.0 X 10 1.00 91 1.00 93 14.00 170 21.50 213 X 250 40 41.3 40 42.2 35 77.1 54 9. X 12 1.00 104 1.00 9 14.00 195 21.50 240 X 300 40 47.2 40 43.5 35 88.5 54 108.9 1 X 1 110 1 115 123 + + 400 X 150 49.9 52.5 55.8 + + X 8 1 122 1 125 145 24.00 228 X 200 55.3 5.7 5.8 10 103.4 X 10 1 129 1 131 195 24.00 23 X 250 58.5 59.4 88.5 10 119.3 X 12 1 134 1 137 240 24.00 295 X 300 0.8 2.1 108.9 10 133.8 X 14 1 141 1 10 280 24.00 290 X 350 4.0 72. 127.0 10 131.5 18 X 8 1 148 1 150 1.50 170 + + 450 X 200 483 7.1 483 8.0 419 77.1 + + X 10 1 158 1 10 1.50 200 2.50 323 X 250 483 71.1 483 72. 419 90.7 73 14.5 X 12 1 17 1 19 1.50 2.50 33 X 300 483 75.7 483 7. 419 138.3 73 152.4 X 14 1 184 1 185 1.50 345 2.50 355 X 350 483 83.5 483 84.0 419 15.5 73 11.0 X 1 1 194 1 190 1.50 30 2.50 38 X 400 483 88.0 483 8.0 419 13.3 73 175.1 + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. (Con t) STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge
WW Grooved Sumittl Form WW Grooved Fittings R-1C CONC. REDUCER R-2C ECC. REDUCER E-5C 90º RED. E E-7C 90º.R. RED. E PPROX. PPROX. PPROX. PPROX. 20 X 8 20.00 173 20.00 175 + + + + 500 X 200 508 78.5 508 79.4 + + + + X 10 20.00 182 20.00 185 1 242 2 390 X 250 508 82. 508 83.9 109.8 737 17.9 X 12 20.00 201 20.00 1 35 2 420 X 300 508 91.2 508 92.1 15. 737 190.5 X 14 20.00 205 20.00 207 1 405 2 440 X 350 508 93.0 508 93.9 183.7 737 199. X 1 20.00 215 20.00 219 1 440 2 4 X 400 508 97.5 508 99.3 199. 737 211.4 X 18 20.00 2 20.00 29 1 485 2 507 X 450 508 120.7 508 122.0 220.0 737 230.0 24 X 8 + + + + + + + + 00 X 200 + + + + + + + + X 10 + + + + + + + + X 250 + + + + + + + + X 12 24.00 293 24.00 295 22.00 525 34.00 20 X 300 10 132.9 10 133.8 559 238.1 84 281.2 X 14 24.00 300 24.00 22.00 535 34.00 40 X 350 10 13.1 10 138.3 559 242.7 84 290.3 X 1 24.00 324 24.00 330 22.00 545 34.00 58 X 400 10 147.0 10 149.7 559 247.2 84 298.5 X 18 24.00 38 24.00 384 22.00 55 34.00 745 X 450 10 175.1 10 174.2 559 25.3 84 337.9 X 20 24.00 24.00 385 22.00 598 34.00 759 X 500 10 172.8 10 174. 559 271.2 84 344.3 30 X + + + + + + + + 750 X 150 + + + + + + + + X 8 + + + + + + + + X 200 + + + + + + + + X 10 + + + + + + + + X 250 + + + + + + + + X 12 + + + + + + + + X 300 + + + + + + + + X 14 + + + + 25.00 5 + + X 350 + + + + 35 25.7 + + X 1 + + 30.00 4 25.00 59 41.50 1000 X 400 + + 72 211.4 35 270.3 1054 453. X 18 30.00 500 30.00 500 25.00 31 41.50 1150 X 450 72 22.8 72 22.8 35 28.2 1054 521. X 20 30.00 535 30.00 715 25.00 75 41.50 1245 X 500 72 242.7 72 324.3 35 30.2 1054 54.7 X 24 30.00 89 30.00 595 25.00 1170 41.50 0 X 00 72 312.5 72 29.9 35 530.7 1054 35.0 3 X 8 + + + + + + + + 900 X 200 + + + + + + + + X 10 + + + + + + + + X 250 + + + + + + + + X 12 + + + + + + + + X 300 + + + + + + + + X 14 + + + + + + + + X 350 + + + + + + + + X 1 3.00 21 + + + + + + X 400 914 281.7 + + + + + + X 18 + + + + + + + + X 450 + + + + + + + + X 20 3.00 1280 3.00 + + + 4 1710 X 500 914 580. 914 + + + 1245 775. X 24 3.00 1370 3.00 + + + 4 190 X 00 914 21.4 914 + + + 1245 889.0 X 30 3.00 113 3.00 + + + 4 2280 X 750 914 515.3 914 + + + 1245 1034.2 + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS Pge 7 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form WW Grooved Fittings E-8C 90º FRE E-9C 90º ONG RDIUS FRE S-1C STRIGT FRE E-10C** 90º SIDE OUTET T-3C** TEE SIDE OUTET CTU PPROX. PPROX. PPROX. PPROX. PPROX. 3 3.9 8.50 18 7.75 11.25 23 13 13 28 80 100. 21 8.2 197 28 10.4 5.9 5.9 12.7 4 4.80.50 9.50 35 12.50 42 17.50 30.50 42 100 121.9 15 241 15.9 318 19.1 7.7 15 13. 15 19.1.90 70 11.50 8 23 58 85 150 175.3 31.8 292 30.9 10.4 2.3 38. 8 9.05 13.00 120 14.00 18.50 118 10.00 43 90 114 200.9 330 54.4 35 470 53.5 254 19.5 40.8 51.7 10 11.10 157 1.50 22.50 188 10.00 58 124 219 250 281.9 71.2 419 572 85.3 254 2.3 5.3 99.3 12 13.20 1.00 190 1 2 275 100 170 295 300 335.3 40 8.2 483 48 124.7 45.4 77.1 133.8 14 15.30 14.00 22.00 235 21.50 2 325 120 14.00 202 14.00 290 350 388. 35 559 10. 54 737 147.4 40.8 35 91. 35 131.5 1 17.40 23.00 300 24.00 32.00 435 1.00 15 272 337 400 442.0 584 13.1 10 813 197.3 40 70.8 123.4 152.9 18 19.50 1.50 24.50 391 2.50 35.00 571 1.00 205 1.50 378 1.50 45 450 495.3 419 22 177.4 73 889 259.0 40 93.0 419 171.5 419 20.8 20 21.0 1 2.00 49 2 3 713 1 221 1 48 1 07 500 548. 0 225.0 737 95 331. 100.3 212.3 275.3 24 25.80 22.00 30.00 808 34.00 44.50 142 1 293 22.00 73 22.00 1048 00 55.3 559 72 3.5 84 1130 744.8 132.9 559 333.8 559 475.4 30 32.00 + + + + + + 24.00 57 25.00 1097 25.00 147 750 72.0 + + + + + + 10 257.2 35 497. 35 747.1 3 38.30 + + + + + + 24.00 73 2 1740 2 2182 900 914.4 + + + + + + 10 333.9 711 789.3 711 989.7 + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. **Reduing side outlet 90 elows, tees nd rosses re ville. Contt Str Pipe Produts for detils. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge 8
WW Grooved Sumittl Form WW Grooved Fittings U R R R U U U R T S T S T S T S E-11C 90 SE EOW T-4C SE TEE E-12C 90 ONG RDIUS SE EOW T-5C REDUCING SE TEE SE DIMENSIONS PPROX. CTU R S T U W Ø NO. OF OTS E-11C SE EOW T-4C SE TEE E-12C R SE EOW 3 3.9 4.88 5.00 0.5 0.50 3.88 0.3 4 19 19 25 + 80 100. 124 127 14 13 99 1 8. 8. 11.3 + 4 4.80.00 0.2 0.50 4.75 0.75 4 24 2 40 + 100 121.9 152 1 13 121 19 10.9 11.8 18.1 +.90 7.00 7.00 0.9 0.2 0.75 4 42 50 7 + 150 175.3 178 178 18 1 19 19.1 22.7 34.5 + 8 9.05 8.38 0.94 0.88 7.50 0.75 4 75 92 141 + 200.9 213 24 22 19 34.0 41.7 4.0 + 10 11.10 9.75 0.94 0.88 7.50 0.75 4 114 125 20 + 250 281.9 248 24 22 19 51.7 5.7 93.4 + 12 13.20 11.25 1.00 1.00 9.50 0.88 4 152 183 310 + 300 335.3 28 25 25 241 22 8.9 83.0. + 14 15.30 12.50 1.00 1.00 9.50 0.88 4 22 293 340 + 350 388. 318 25 25 241 22 118.8 132.9 154.2 + 1 17.40 13.75 1.00 1.00 9.50 0.88 4 312 338 425 + 400 442.0 349 25 25 241 22 141.5 153.3 192.8 + 18 19.50 13.50 1.12 1.12 11.75 0.88 4 451 489 770 + 450 495.3 343 29 29 299 22 204. 221.8 349.3 + 20 21.0 1.00 13.50 1.12 1.12 11.75 0.88 4 557 32 717 + 500 548. 40 343 29 29 299 22 252.7 28.7 325.2 + 24 25.80 18.50 13.50 1.12 1.12 11.75 0.88 4 814 895 105 + 00 55.3 470 343 29 29 299 22 39.2 40.0 479.0 + 30 32.00 23.00 1.00 1.19 1.15 14.25 1.00 4 1192 1742 2431 + 350 72.0 584 40 30 29 32 25 540.7 790.2 1102.7 + 3 38.30 2.00 1 1.25 1.15 17.00 1.00 4 1798 2240 3415 + 900 914.4 0 483 32 29 432 25 815.5 101.0 1549.0 + T-5C REDUCING SE TEE NOTES: 1. ses of these fittings re intended for support in ompression nd re not to e used for nhors or supports in tension or sher. 2. ses re fed nd drilled. Dimension R is finished dimension. Ø w 3. ses 3-24 meet the dimensions of SME 1.1 nd 1.42. S + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. ROUND SE REGISTERED TRDEMRK OF STR PRODUCTS Pge 9 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form Reduing Fitting Outlet Designtion METOD OF DESIGNTING OUTETS OF REDUCING FITTINGS FOR SPECIFICTIONS Reduing Tees Reduing on Outlet Reduing on One Run Reduing on One Run nd Outlet Reduing on oth Runs (ull ed) Reduing Crosses d d d d Reduing on One Outlet Reduing on oth Outlets Reduing on One Run nd Outlet Reduing on One Run nd oth Outlets Reduing terls Reduing on rnh Reduing on One Run Reduing on One Run nd rnh True Side Outlet Tee Doule rnh Elow Side Outlet 90 deg. Elow d d Right nd eft nd Right nd eft nd The rgest opening estlishes the si size of reduing fitting. The lrgest opening is nmed first, exept for ull hed tees whih re reduing on oth runs nd doule rnh elows where oth rnhes re reduing; the outlet is the lrgest opening nd nmed lst in oth ses. In designting the openings of reduing fittings, they should e red in the order indited y the sequene of the letters,,, nd d. In designting the outlets of side outlet reduing fittings, the side outlet is nmed lst; nd in the se of the side outlet ross, whih is not shown, the side outlet is designted y the letter e. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge 10
WW Grooved Sumittl Form Tp otions METOD OF DESIGNTING OCTION OF TPPED OES The ove illustrtions show two views of the sme fitting nd represent fittings with symmetril shpes, with the exeption of the side outlet elow nd the side outlet tee (stright sizes). If fitting wll thikness is insuffiient for the required tp size or ngle of tp, oss will e required. REGISTERED TRDEMRK OF STR PRODUCTS Pge 11 STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om
WW Grooved Sumittl Form Pipe Preprtions D T O.D. C R DUCTIE IRON PRESSURE CUT GROOVING SPECIFICTIONS FOR FEXIE ND RIGID OINTS OUTSIDE DI. CTU O.D. TO. GSKET SE +0.000/-0.020 FEXIE OINT RIGID OINT GROOVE WIDT +0.031/-0.01 GROOVE DI. C GROOVE DEPT D CTU TO. MIN. MX. 3 3.90 +0.045/-0.045 0.750 0.840 0.375 3.723 +0.000/-0.020 0.09 0.151 0.120 0.31 4 4.800 +0.00/-0.00 0.750 0.840 0.375 4.53 +0.000/-0.020 0.09 0.151 0.120 0.32.900 +0.00/-0.00 0.750 0.840 0.375.5 +0.000/-0.020 0.100 0.154 0.120 0.34 8 9.050 +0.00/-0.00 0.875 0.950 0.500 8.781 +0.000/-0.025 0.104 0.177 0.145 0.3 10 11.100 +0.00/-0.00 0.938 1.015 0.500 10.813 +0.000/-0.025 0.114 0.18 0.145 0.38 12 13.200 +0.00/-0.00 0.938 1.015 0.500 12.90 +0.000/-0.030 0.117 0.192 0.145 0.40 14 15.300 +0.050/-0.080 0.938 1.015 0.25 14.99 +0.000/-0.030 0.12 0.20 0.15 0.42 1 17.400 +0.050/-0.080 1.188 1.340 0.25 17.03 +0.000/-0.030 0.128 0.208 0.15 0.43 18 19.500 +0.050/-0.080 1.188 1.340 0.25 19.125 +0.000/-0.030 0.148 0.228 0.185 0.47 20 21.00 +0.050/-0.080 1.188 1.340 0.25 21.219 +0.000/-0.030 0.150 0.230 0.185 0.51 24 25.800 +0.050/-0.080 1.188 1.340 0.25 25.40 +0.000/-0.030 0.157 0.237 0.185 0.5 30 32.000 +0.080/-0.00 1.375 1.25 0.750 31.550 +0.000/-0.035 0.195 0.282 0.215 0.3 3 38.300 +0.080/-0.00 1.375 1.25 0.750 37.850 +0.000/-0.035 0.195 0.282 0.215 0.73 RDIUS R MIN. W TICKNESS T NOTES: 1. When rigid rdius groove is used, the pipe or fitting ends re drwn together in ontt s the oupling is tightened wheres when flexile rdius groove is used it llows for moderte onditions of pipe movement or defletion due to therml, seismi or settling tivities. 2. Gsket set must e free from sores, sems, loose pint, sle, dirt, grese nd rust to ssure lek tight sel. 3. Pipe end squreness (ends must e squre ut) mximum llowle tolerne from squre ut ends is 0.030" for 3" size, 0.045" for sizes 4" nd ", 0.00" for sizes 8" through 3". 4. Groove dimeter must hve uniform depth for entire irumferene. 5. Pipe out of roundness - differene etween mximum O.D. nd minimum O.D. mesured t 90 must not exeed totl O.D. tolerne listed. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE 1-800-999-3009 FX 281-558-9000 www.strpipeproduts.om Pge 12