600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON ON ON ON ON ON MOM MOM ON MOM Must not have blank in "momentary" box. H Metal lever, screw terminals H/ Metal lever, solder lug/quick-connect terminals NH nsulated lever, screw terminals NH/ nsulated lever, solder lug/quickconnect terminals NH/ nsulated lever, normalized quickconnect terminals Momentary R ON ON MOM R MOM ON MOM Options Locking levers For models with metal lever only T Tropicalized case L Bushing 6 mm (.69) LUXE Chrome finish TKLUXE Front panel sealing + T and LUXE G Matt black finish GK Matt black finish + front panel sealing G08 Luminous tip on lever V V V locked position locked positions locked positions ABOUT THS SERES Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTCE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Security caps are available to prevent inadvertent lever operation. They are presented in section M. Sealing boots are available on 600H series to protect the switches against dust and water. They are presented in section N. Mounting accessories : standard hardware supplied with all models : - 600H and series : hex nut U66 and knurled nut U - 600NH series : hex nut U66 and knurled nut U5 Standard and special hardware are presented in section N. Packaging unit : 5 pieces. -
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Distinctive features and specifications Construction Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength. Rating These switches are suitable for motor loads and power applications up to 5A 50VAC or 0A 00VAC Max. current/voltage ratings : see tables below Peak current : 0A max. during / sine, 50VAC nitial contact resistance : 0 mω max. at A VDC nsulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals.500 Vrms 50 Hz min. between terminals and frame Electrical life : 0.000 cycles at full load ELECTRCAL SPECFCATONS For peak currents up to 50A, see section G. MODELS Single and double pole APPROVED RATNGS 600H - 600NH FUNCTONS UL CSA NF-VDE UL 05 CSA - EN 6058- ON - OFF () ON - ON (6) Other (-7-8-9) ON - OFF () & ON - ON (6) Other (-7-8-9) 5A / HP 5-50VAC 0A / HP 5-50VAC 5A / HP 5-50VAC 0A / HP 5-50VAC 0()A 00VAC T 85/55 (600H) T 5/55 (600NH) - FOR NFORMATON- Max. current/voltage rating w. resistive load Functions Ratings Electrical life ON - OFF ON - ON Other 5A 50VAC 0A VDC 5A VDC 5A 5VAC A 50VAC 5A 5VDC 0.000 cycles ON OFF ON 5A 50VAC 6.000 cycles 0.000 cycles MATERALS Case : polyester UL9-V0 Actuator : - 600H : brass, nickel plated - 600NH : black polyamide Bushing : brass, nickel plated Contacts : silver/nickel alloy GENERAL SPECFCATONS Torque :,50 Nm (.0 Ft.lb) max. applied to nut Panel thickness :,5 mm (.77) max. between nuts Operating temperature : -0 C to +55 C -
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Specifications - Positions and connections AGENCY APPROVALS Availability : see chart on previous page. Marking : approved models are standard marked. Ø.0 (.8DA) EN 6058- EN 6058- Ø.0 (.8DA) PANEL CUT-OUT Ø.50 (.9DA) MOUNTNG RECOMMENDATONS Connection For quick-connect terminals, use 6, x 0,8 mm normalized female connectors. For screw terminals, use : either,5 mm or,5 mm rigid wires, or prepared stripped and tin plated flexible wires, or prepared flexible wires with crimped termination per EN 5007 (DN 68) Ground connector Compulsory if the panel is not metallic or not connected to ground. Should also be used when front face nut is of plastic material. Order separately, see section N. 5.0 (.0).70 (.066) Ø.50 (.7DA) 9.60 (.77) POSTONS AND CONNECTONS - FUNCTONS ( WAYS) FOR 600-600H - 600NH - 600NF - 6000 AND 600 SERES FUNCTON FUNCTON -R FUNCTON -R (momentary one side) (momentary both sides) ON ON ON MOM ON ON MOM ON MOM 5-6 5-6 5-6 5-6 5- - - - - - 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 Common Maintained Momentary Terminals and 6 must be connected by the user for a way switch ON ON ON Single pole switches in a double pole case. 5 5 5 -
600H SERES TOGGLE SWTCHES - HGH AMPERAGE - METAL LEVER Solder lug/quick-connect terminals - screw terminals and maintained or momentary positions Solder lug/quick-connect terminals 6,5 x 0,8 (.50 x.0) or screw terminals + clamp, and pole configurations Normalized quick-connect terminals (/) optional. On request..50 (.77) 600H/ 600H Ø.0 (.DA) 6.5x (.5x.0) 6.5 (.5) Ø.00x0.50 S (.8DAx0.50 S) MODEL STRUCTURE Single pole 6H/ 6H ON - OFF 65H/ 65H MOM - ON 66H/ 66H ON - ON 67H/ 67H MOM OFF MOM 68H/ 68H ON OFF MOM 69H/ 69H ON OFF ON 9.50 (.6).00 7.50 0.50 5.00.00 (.55) (.689) (.) (.59) (.) 6 Ø.00x0.75 S (.7DAx0.75 S) 7.0.90 (.79) (.586) Double pole 6H/ 6H ON - OFF 6H/ 6H* ON ON ON 6H/-R 6H-R* ON ON MOM 6H/-R 6H-R* MOM ON MOM 65H/ 65H MOM - ON 66H/ 66H ON - ON 67H/ 67H MOM OFF MOM 68H/ 68H ON OFF MOM 69H/ 69H ON OFF ON 9.70 (.69) A A A.50 7.50 0.50.0.00 (.86) (.689) (.) (.86) (.).00 (.) B B5 B6 0 Ø.00x0.75 S (.7DAx0.75 S) * Function : SP in DP case - see specifications..65 (.578) 6.80 (.67) 8-7 8-9 65H/ 65H ON - OFF 655H/ 655H MOM - ON 656H/ 656H ON - ON 657H/ 657H MOM OFF MOM 658H/ 658H ON OFF MOM 659H/ 659H ON OFF ON.80 (.5).50 7.50.0.00.00 (.58) (.689) (.) (.99) (.) 7 5 8 6 9.00.00 (.7) (.7) 6 Ø.00x0.75 S (.7DAx0.75 S).90 (.586) 7.0 (.79) -5
600H SERES TOGGLE SWTCHES - HGH AMPERAGE - METAL LEVER OPTONS Complete above box with desired options in the same order as below T Tropicalized diallylphthalate case (-0 C to +85 C) L Special threaded bushing, length 6 mm (.69) LUXE Chrome plated lever and cap nut U7 TK LUXE Front panel sealing by O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands bar pressure and remains sealed even when switch is operated + options T and LUXE. ➀ O-ring K ➁ Sealing washer G Matt black finish on bushing, lever and nuts. ncludes tropicalization (option T) GK Front panel sealing by O-ring and sealing washer (as described in option TK LUXE) + option G G08 Option G + fluorescent tip on lever. White fluorescent tip becomes luminous when submitted to ultra violet rays. 0.8 LOCKNG LEVERS ( and pole models) For -pole models, refer to 6000 series. Ø.90-NS (5/''NS).90 9.0 (.68) (.76) Ø.90-NS (5/''NS).90 9.0 (.68) (.76) Ø.90-NS (5/''NS).90 0.0 (.68) (.8) -V -V -V locked position locked positions locked positions ACTUATOR OPTONS ( and pole models) 0 mm (.8) long actuator 0 mm (.57) long actuator Retro style actuator, gold plated or chrome plated On request. Ø6.00 (.6DA) 0.00 (.8) Ø6.00 (.6DA) 0.00 (.57) Ø6.0 (.8DA) 5.00 (.590) -6
6-600H SERES TOGGLE SWTCHES - METAL LEVER SPECFCATONS Max. current/voltage rating with resistive load : 6A 50VAC and 5VAC nitial contact resistance : 0mΩ max. at A VDC nsulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.500 Vrms 50 Hz min. between terminals.500 Vrms 50 Hz between terminals and frame Electrical life at full load : 0.000 cycles Torque :,50 Nm (.0 Ft.lb) max. applied to nut Panel thickness :,5 mm (.77) max. between nuts Operating temperature : -0 C to +55 C Hardware supplied : hex nut U66 and knurled nut U MATERALS Case : melamine/polyester Actuator : brass, nickel plated Bushing : brass, nickel plated Contacts : copper, silver plated 6-600H/ 6-600H Ø.0 (.DA) Ø.00x0.50 S (.8DAx0.50 S).50 (.77) 6.5x (.5x.0) 6.5 (.5) Single pole.00 7.50 0.50 5.00.00 (.55) (.689) (.) (.59) (.) 6-6H/ 6-6H ON - OFF 6-66H/ 6-66H ON - ON 6-69H/ 6-69H ON OFF ON 9.50 (.6) 6 Ø.00x0.75 S (.7DAx0.75 S) 7.0.90 (.79) (.586) Double pole.50 7.50 0.50.0.00 (.86) (.689) (.) (.86) (.) 6-6H/ 6-6H ON - OFF 6-66H/ 6-66H ON - ON 6-69H/ 6-69H ON OFF ON 9.70 (.69) A A A.00 (.) B B5 B6 0 Ø.00x0.75 S (.7DAx0.75 S).65 (.578) 6.80 (.67) 8-7 8-9.50 7.50.0.00.00 (.58) (.689) (.) (.99) (.) 7 6-65H/ 6-65H ON - OFF 6-656H/ 6-656H ON - ON 6-659H/ 6-659H ON OFF ON.80 (.5) 5 8 6 9.00.00 (.7) (.7) 6 Ø.00x0.75 S (.7DAx0.75 S).90 (.586) 7.0 (.79) -7
600NH SERES TOGGLE SWTCHES - HGH AMPERAGE - NSULATED LEVER Solder lug/quick-connect terminals - screw terminals and maintained or momentary positions Solder lug/quick-connect terminals 6,5 x 0,8 (.50 x.0) or screw terminals + clamp, and pole configurations Normalized quick-connect terminals (/) optional. On request. 600NH/ 600NH Ø.0 (.DA) Ø.00x0.50 S (.8DAx0.50 S).50 (.77) 6.5x (.5x.0) 6.5 (.5) Single pole.00.50.50 5.00.00 (.55) (.5) (.5) (.59) (.) 6NH/ 6NH ON - OFF 65NH/ 65NH MOM - ON 66NH/ 66NH ON - ON 67NH/ 67NH MOM OFF MOM 68NH/ 68NH ON OFF MOM 69NH/ 69NH ON OFF ON 9.50 (.6) 6 Ø.00x0.75 S (.7DAx0.75 S) x6.5 (.0x.5) 5.00 (.59) 7.0 (.79) Double pole 6NH/ 6NH ON - OFF A B 6NH/ 6NH ON ON ON A B5 6NH/-R 6NH-R* ON ON MOM A B6 6NH/-R 6NH-R* MOM ON MOM 65NH/ 65NH MOM - ON.00 Ø.00x0.75 S 66NH/ 66NH ON - ON (.) (.7DAx0.75 S) 67NH/ 67NH MOM OFF MOM 68NH/ 68NH ON OFF MOM 69NH/ 69NH ON OFF ON * Function : SP in DP case - see specifications. 9.70 (.69).50.50.50.50.00 (.86) (.5) (.5) (.86) (.) 0 x6.5 (.0x.5).70 (.579) 6.80 (.67) 8-7 8-9 65NH/ 65NH ON - OFF 655NH/ 655NH MOM - ON 656NH/ 656NH ON - ON 657NH/ 657NH MOM OFF MOM 658NH/ 658NH ON OFF MOM 659NH/ 659NH ON OFF ON.80 (.5).50.50.0.00.00 (.58) (.5) (.) (.99) (.) 7 5 8 6 9.00.00 (.7) (.7) 6 Ø.00x0.75 S (.7DAx0.75 S) x6.5 (.0x0.5).90 (.586) 7.0 (.79) -8
6-600NH SERES TOGGLE SWTCHES - NSULATED LEVER SPECFCATONS Max. current/voltage rating with resistive load : 6A 50VAC and 5VAC nitial contact resistance : 0mΩ max. at A VDC nsulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.500 Vrms 50 Hz min. between terminals.500 Vrms 50 Hz between terminals and frame Electrical life at full load : 0.000 cycles Torque :,50 Nm (.0 Ft.lb) max. applied to nut Panel thickness :,5 mm (.77) max. between nuts Operating temperature : -0 C to +55 C Hardware supplied : hex nut U66 and knurled nut U5 MATERALS Case : melamine/polyester Actuator : black polyamide Bushing : brass, nickel plated Contacts : copper, silver plated 6-600NH/ Ø.0 (.DA) 6-600NH Ø.00x0.50 S (.8DAx0.50 S).50 (.77) 6.5x (.5x.0) 6.5 (.5) Single pole.00.50.50 5.00.00 (.55) (.5) (.5) (.59) (.) 6-6NH/ 6-6NH ON - OFF 6-66NH/ 6-66NH ON - ON 6-69NH/ 6-69NH ON OFF ON 9.50 (.6) 6 Ø.00x0.75 S (.7DAx0.75 S) x6.5 (.0x.5) 5.00 (.59) 7.0 (.79) Double pole.50.50.50.50.00 (.86) (.5) (.5) (.86) (.) 6-6NH/ 6-6NH ON - OFF 6-66NH/ 6-66NH ON - ON 6-69NH/ 6-69NH ON OFF ON 9.70 (.69) A A A B B5 B6 0.70 (.579).00 (.) Ø.00x0.75 S (.7DAx0.75 S) x6.5 (.0x.5) 6.80 (.67) 8-7 8-9.50.50.0.00.00 (.58) (.5) (.) (.99) (.) 7 6-65NH/ 6-65NH ON - OFF 6-656NH/ 6-656NH ON - ON 6-659NH/ 6-659NH ON OFF ON.80 (.5) 5 8 6 9.00.00 (.7) (.7) 6 Ø.00x0.75 S (.7DAx0.75 S) x6.5 (.0x0.5).90 (.586) 7.0 (.79) -9