MNE0 M MN W L/ QV JIS symbol 5 port valve position single solenoid position double solenoid position all ports closed position //R connection position P// connection Common specifications Descriptions Valve and operation type Pilot operated spool valve Working fluid Compressed air Max. working pressure MPa 1.0 Min. working pressure MPa Refer to the individual specifications below. Withstanding pressure MPa 1.5 mbient temperature C to 0 (no freezing) Fluid temperature C 5 to 0 Lubrication Not required (when lubricating, Protective structure Vibration/impact m/s Working environment use turbine oil ISO VG.) Dust proof 50 or less / 0 or less Containing corrosive gas is impermissible. Note 1: mbient temperature refers to the temperature for storage and installation, and differs from fluid temperature, which applies during operation. Descriptions Min. working pressure MPa Port size Note position Double solenoid ll ports closed position //R connection P// connection Response time Note ms Weight Discrete valve / body porting 5 port pilot operated pneumatic valve 0/1// Series Individual specifications position kg Double solenoid position pplicable cylinder bore size: ø1 to ø0 mm ()0 Note 1 0. Rp M5 1/8 0.1 0.18 Refer to Intro 17 for details. Electric specifications Descriptions ()0 to 1 / Rated voltage V C DC 0, 00 (50 / 0Hz) 1, Rated voltage fluctuation range ±% 0 V Starting C 00 V current 1 V DC V 0 V Holding C 00 V current 1 V DC V 0 V Power C 00 V consumption 1 V W DC V Heat proof class 0.05 / 0.0 0.170 / 0. 0.0 / 0.0 0.00 / 0.070 0.0 0.500 0.075 0.50 0.08 / 0.0 0.0 / 0.080 0.017 / 0.01 0.050 / 0.00 0.0 0.500 0.075 0.50 1.8 / 1. 5.0 /.0.1 / 1. 5.0 /.0 1.8 1.8 (molded coil) Note1: The 0 VC 50/0 Hz rated voltage can be used at 1 VC 0 Hz, and 00 VC 50/0 Hz can be used at 0 VC 0 Hz. 1 0. 0. 0.0 Rp Rp 1/8 1/ 0.18 0. 0. 0. 0. Rp 1/ 50 0.5 0.8 1. Rp 1/ 0. 0. 50 0. 0. 1.0 Note 1: () is 0 for the single type. Note : G and NPT threads are usable for the () 0, 1,, and piping port threads. Contact CKD for details. Note : Response time is the value when supply pressure 0.5 MPa, not lubricated and ON. The value varies depending on pressure and quality of lubricant. Rp /8 80
0 to Series Flow characteristics Model no. () 0 Note position 1 position position position position position position position position Solenoid position Double solenoid Double solenoid Double solenoid ll ports closed //R connection Double solenoid ll ports closed //R connection Double solenoid ll ports closed //R connection P// connection Double solenoid ll ports closed //R connection P// connection Port size M5 Rp1/8 Rp1/8 Rp1/ Rp1/ Rp1/ Rp/8 C (dm / (s bar)) 0.1 0.7.0 1.5 1..0.5..0.5.0 5.8. 5.1. b 0.5 0.7 0. 0.1 0. 0. 0. 0. 0.5 0. 0.5 0. 0. 0. 0. Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Note : () is 0 for the single type. MNE0 M MN W L/ Copper and PTFE free Flow path free of copperbased and PTFEbased materials ** Voltage (0 not available) P QV Discrete 5 port pilot operated valve 81
Discrete valve: How to order body porting MNE0 1 0 08 M L C0V M MN W L/ QV 0 to Series Model no. Solenoid position C Port size D E Electric connection Note on model no. selection F Other options Note 1: R1 and R for 0 are M5. Note : R1 and R for 1 are Rp1/8. Note : Rc threads and NPT threads are available for the piping port threads. Contact CKD for information. Note : When selecting the DIN terminal box for the lock type with a manual lever, the terminal box must face outward during use. G Voltage Symbol Descriptions Solenoid position 1 5 C M5 0 08 lank P P1 S H N NC NO position single solenoid position double solenoid position all ports closed position //R connection position P// connection M5 Rp1/8 Rp1/ Rp/8 Refer to the next page for wire connections. C0V C00V DC1V DCV C1V C0V Port size D M1 Locking lank Locking lank Nonlocking M Nonlocking M Locking with manual lever M Nonlocking with dust proof cover M Nonlocking upward R position change E Electric connection F Other options G Voltage Note No option Mounting bracket (L shaped bracket) (position single solenoid) Mounting bracket (U shaped bracket) Surge suppressor (variable resistor) attached Check valve attached (pplicable to only position all ports closed) Plug attached ( port valve) way valve with plug assembly (C1:. E1: R1) way valve with plug assembly (C:. E: R) 0 VC 50/0Hz 00 VC 50/0Hz 1 VDC VDC 1 VC 50/0Hz 0 VC 50/0Hz Note 1 Note Note Model no. F F1 F F 0 <Example of model number> 08MP1C0V Model: Solenoid position : position //R connection C Port size : Rp1/ D : Nonlocking E Electric connection : lank, DIN terminal box (Pg11) F Other options : Mounting bracket G Voltage : 0 VC 8
0 to Series (Electric connection list) E Electric connection Small terminal box No lead wire lank No lead wire L No lead wire with light Note L Lead wire length (0 mm) with light Note DIN terminal box lank L F DIN terminal box (Pg11) DIN terminal box (Pg11) with light Note DIN terminal box (G1/) Cconnector (lead wire lateral) C C00 C01 C0 C0 C1 C C0 C1 C C C Lead wire length (0 mm) Lead wire length (500 mm) Lead wire length (00 mm) Lead wire length (000 mm) Lead wire length (00 mm) No lead wire Lead wire length (0 mm) Lead wire length (500 mm) Lead wire length (00 mm) Lead wire length (000 mm) Lead wire length (00 mm) No lead wire Dconnector (lead wire upward) D D00 D01 D0 D0 D1 D D0 D1 D D D Lead wire length (0 mm) Lead wire length (500 mm) Lead wire length (00 mm) Lead wire length (000 mm) Lead wire length (00 mm) No lead wire Lead wire length (0 mm) Lead wire length (500 mm) Lead wire length (00 mm) Lead wire length (000 mm) Lead wire length (00 mm) No lead wire Grommet lead wire lank E E1 E 1 L G GL Grommet lead wire Grommet lead wire Conduit lead wire (CTC1) Conduit lead wire (G1/) Conduit lead wire round terminal box (G/) Conduit lead wire round terminal box (G1/) Conduit lead wire round terminal box (G1/) with light Note 5 Conduit lead wire round terminal box gland (a) Conduit lead wire round terminal box gland (a) with light Note 5 Note : The L and L DC type have a builtin surge suppressor. (Refer to page 887 for the circuit drawings with light and surge suppressor. ) Note 5: L/GL 1VDC are not available. Model no. F F1 F F 0 MNE0 M MN W L/ QV Discrete 5 port pilot operated valve 8
MNE0 ()0 Series Dimensions 0 position single solenoid: (grommet lead wire) 00 position double solenoid: (grommet lead wire) M MN W L/.5 1.5. (M5) (0) 70 M5 x 0.8 (M5) Rp1/8 (0): C1/C M5 x 0.8 (M5).. M5 x 0.8 Rp1/8 (0): S E1/E.5 88.5 ø.5 7. Lead wire 0/0.18 Length 0 mm Mounting bracket: (P: position single solenoid only) Mounting bracket: (P1) 1 78 1.5 8.5 QV 8 55 5.8 1 1 ø.5 7 57 ø.8 1. 8
()0 Series Dimensions Small terminal box: () position single solenoid position double solenoid MNE0 M G1/ MN W Small terminal box with light: (L/L) 8 7 8 Lead wire 0 mm (L) 5 8 8 Pg7 L/ 1 171 Cconnector: (C, C0*, C1, C, C*, C) Lead wire Length 0 to 000 mm (C, C0*, C, C*).5 17 Dconnector: (D, D0*, D1, D, D*, D) Lead wire Length 0 to 000 mm (D, D0*, D, D*) QV.5 17 position change: (R) 7 5 Discrete 5 port pilot operated valve 87
MNE0 1 Series Dimensions 1 position single solenoid: Small terminal box position double solenoid: Small terminal box M MN W 0 (0) (08) Rp1/8 (0) Rp1/ (08): C1/C L/ 1 1.5 7.5 ø.5 8.5 G1/ 8.5 17 1 11 17.5 Rp1/8 (0) Rp1/ (08): S Rp1/8 E1/E 1 0 position: Small terminal box Mounting bracket: (P: position single solenoid dedicated) QV 7 Mounting bracket: (P1) ø5.5 118.5 1.8 5 55 0 ø.8 70 1. 88
Dimensions Small terminal box with light: (L/L) position single solenoid.5 1 Series position double solenoid, position * The drawing shows position double solenoid. MNE0 M MN Grommet lead wire: (E) 1 8 Pg7 Lead wire 0 mm (Only L) position double solenoid: 17 (position: 177) W Lead wire 0 mm L/.5.5 1 position double solenoid: 1.5 (position: ) Cconnector: (C, C0*, C1, C, C*, C).5 118.5 Lead wire Length 0 to 000 mm (C, C0*, C, C*) position double solenoid: (position: 18) Dconnector: (D, D0*, D1, D, D*, D) Lead wire Length 0 to 000 mm (D, D0*, D, D*).5 QV 118.5 position double solenoid: (position: 18) position change: (R) Discrete 5 port pilot operated valve 1 position double solenoid: 177 (position: 0) 8
MNE0 M MN W L/ Series Dimensions position single solenoid: DIN terminal box ø.5 installation hole 50 0 Rp1/ C1/C 8 1 1 1 Rp1/ E1/S/E 5.5 (0) 18 Rp1/8 PE 5.5 Pg11 0 position double solenoid: DIN terminal box 8.5 0 0 position: DIN terminal box Mounting bracket: (P: position single solenoid dedicated) QV 117 7 80 Mounting bracket: (P1) ø5.5 ø.8 80 70 0 18 15.5 75 8 7 5.8 1. 00 * Refer to page 5 for a check valve.
Series Dimensions DIN terminal box with indicator light: (L) Pg11 position single solenoid position double solenoid, position * The drawing shows position double solenoid. MNE0 M MN 0 Grommet lead wire: (E) 18.5 position double solenoid: (position: 117) position double solenoid: 0 (position: 75.5) W Lead wire 0 mm (0/0.18) L/ 5 0 18.5 position double solenoid: (position: 117) position double solenoid: 0 (position: 75.5) Conduit lead wire: (E1/E) E1: CTC1 E: G1/ Lead wire 0 mm 80 177 position double solenoid: (position: 117) position double solenoid: 58 (position:.5) Round terminal box: (1//L) ø position double solenoid: (position: 117) QV 11 1/: 17 L:.5 position change: (R) 17 1 position double solenoid: 58 (position:.5) position double solenoid: 0 (position:.5) Discrete 5 port pilot operated valve 178 position double solenoid: 0 (position:.5) 01
MNE0 Series Dimensions position single solenoid: DIN terminal box position double solenoid: DIN terminal box M MN Rp1/ (08) Rp/8 (): E1/S/E W L/ ø.5 installation hole 0 55 Rp1/ (08) Rp/8 (): C1/C 5 55.5 7.5 18.5 8 5 position: DIN terminal box (0) Rp1/8: PE.5 5 Pg11 5 5 Mounting bracket: (P: position single solenoid dedicated) QV 0 8.5 18 Mounting bracket: (P1) 5 ø5.5 18 8 ø.5 7 1 80 5 55 5 1. * Refer to page 5 for a check valve. 0
Dimensions DIN terminal box with indicator light: (L) position single solenoid 5 Series position double solenoid, position * The drawing shows position double solenoid. MNE0 M MN Grommet lead wire: (E) Conduit lead wire: (E1/E) Round terminal box: (1//L) 18.5 18.5 E1: CTC1 E: G1/.5 ø Lead wire 0 mm (0 x 0.18) 5 85 5 Lead wire 0 mm 118 1/: 1 L: 15.5 position double solenoid: (position: 18) position double solenoid: 5 (position: 8) position double solenoid: (position: 18) position double solenoid: 5 (position: 8) position double solenoid: (position: 18) position double solenoid: 70 (position: 1) position double solenoid: (position: 18) W L/ QV position change: (R).5 08 position double solenoid: 70 (position: 1) position double solenoid: (position: 8) Discrete 5 port pilot operated valve 1 position double solenoid: 7 (position: 17) 0
0/1 Series MNE0 M MN W L/ Internal structure and parts list 0 00 1 position single solenoid position single solenoid 7 position double solenoid position double solenoid 5 1 11 (C) 5 1 11 7 R1 (E1) 5 P (S) (C) R (E) 1 (C) 8 8 11 1 (C) R1 (E1) P (S) R (E) 7 1 position ll ports closed 5 (C) 1 11 8 1 1 1 QV Main parts list No. Parts name Material 1 5 7 8 11 1 1 1 ody Valving element (spool) Cap Coil assembly (solenoid valve) Seal assembly Piston () assembly Piston () assembly Cylinder Cylinder O ring Pilot valve body Small terminal box ody block Spring retainer luminum alloy diecasting luminum luminum alloy diecasting luminum luminum Nitrile rubber luminum alloy diecasting luminum alloy diecasting Stainless steel //R connection Repair parts list No. / parts name Model no. 0 00 1 1 5 7 5 7 Repair kit Seal assembly Piston () assembly Piston () assembly Coil assembly * 0K 00K 1K K 1K 1 11 R1 (E1) 1 1 P (S) 5 R (E) 1 15 111 Discrete miniature pneumatic valve model no. (asic P51MOE[Voltage]) Discrete miniature pneumatic valve model no. (asic P51MO[Voltage]) *: Consumables are stocked as a kit, and cannot be purchased individually. (The kit consists of the seal assembly and piston () and () assemblies. The coil assembly is not included.) 11 1 8
Internal structure and parts list / position single solenoid 0/ position double solenoid 11 1 1 R1 (E1) 7 8 1 5 P (S) (C) R (E) 7 8 1 5 (C) / Series 1 MNE0 M MN W L/ R1 (E1) P (S) R (E) 1 / position all ports closed 1 1 1 7 1 8 5 (C) 0/ //R connection Main parts list 50 P// connection No. Parts name Material 1 5 7 8 11 1 1 1 1 ody Valving element (spool) Cap Plunger Plunger spring Coil assembly Seal assembly Piston () assembly Piston () assembly Cylinder Cylinder ody block Spring retainer O ring Pilot valve body DIN terminal box luminum alloy diecasting luminum luminum alloy diecasting luminum luminum luminum alloy diecasting Stainless steel Nitrile rubber luminum alloy diecasting Repair parts list No. / parts name Model no. 0 0 50 R1 (E1) P (S) 7 8 7 8 Repair kit Seal assembly Piston () assembly Piston () assembly Coil assembly * K 0K K K K K R (E) 5 1 11 11 *0 [Electric connection] COIL[Voltage] *0 [Electric connection] COIL[Voltage] *: Consumables are stocked as a kit, and cannot be purchased individually. (The kit consists of the seal assembly and piston () and () assemblies. The coil assembly is not included.) *: Plunger assembly is included with a coil assembly. 1 QV Discrete 5 port pilot operated valve 85