GUIDE TO TECHNICAL SERVICES AT EUREXPO

Welcome to the new Eurexpo! 24th 26th May 2011 GUIDE TO TECHNICAL SERVICES AT EUREXPO Suspension services Electricity Water, pool filling and emptying, compressed air Telecommunications Parking passes, drinks General conditions Order form Stand layout P.2 P.6 P.8 P.9 P.10 P.11 P.12-13 P.14 DEADLINE FOR ORDER : 3rd May 2011 A 30% surcharge will be applied to orders sent after this date Electricity available as from 21st May 2011 EUREXPO Exhibitors Service - BP 190-69686 Chassieu Cedex France Tel: +33 (0)4 72 22 30 30 - Fax: +33 (0)4 72 22 32 32 - services@eurexpo.com Suspension Service : nicolas.laurent@eurexpo.com - Tel : +33 (0)4 72 22 30 72 Fax : +33 (0)4 72 22 30 63 catherine.fumey@eurexpo.com - Tel : +33 (0)4 72 22 32 93 Fax : +33 (0)4 72 22 30 63

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 2 / 14 OVERHEAD SUSPENSION OF ITEMS The roof structure of some of Eurexpo s halls is designed for the suspension of signage, light rigs and decorative features. These objects are: Suspended using steel drop wires, linked to the structure joints by steel shackles and ending in a loop. Subject to very strict regulations. Suspended with a horizontal tolerance of 50cm to 1m and vertical tolerance of 10cm depending on the hall and weight of the object. Suspended only by Eurexpo s providers The structures which do not allow suspension are: (instead, we can supply a free-standing support structure): Gallery B Gallery A (over the whole width and 6m of length from the Dome) Gallery C (over the whole width and 8, 50m of length from the Dome) Passages 23, 33b, 45, 46, 67, 78, 6-66 (over 15m of width) The area surrounding the halls over a 3m width. The mobile partition area in HALL 66 and between HALLS 9 and 10, only when partitions are deployed. No material may be attached to decorative cladding halls, or their supports, or grids ceiling passages between halls. As a result of technical restrictions on the use of the framework in certain halls, the height limit for suspension from the roof is: 5m in Halls 3, 33, 5 and 8, From 2m to 5,30m in Gallery A, depending on the location From 3m to 7,70m in Gallery C, depending on the location. GENERAL CONDITIONS FOR PROVIDING SERVICES 1. SALES CONDITIONS This service includes the fitting and removal of drop wires. It does not include the fitting and removal of additional equipment (sign, light rig, lighting etc.) but we would be pleased to give you a quote for any such additional services. The order for suspension services will not be executed until full payment for the services has been received. All services provided are payable in full. Use of the installation cradle is invoiced on an hourly basis with any part of an hour being considered a full hour. Any modification after the initial technical study will give rise to additional study costs. 2. INSTALLATION All suspension services require a prior technical study. After completion of this study, either the Internet order on www.eurexpo.com exhibitors category is validated, or a quote is sent to you and your validation of this quote will be considered as a firm order. If you are looking for a comprehensive, ready-to-use product, lighting and signage kits are available on the order form. These kits include the structural frame, suspension wires, spot lights and electrical wiring but not the power supply box on the floor (to be ordered from the exhibitors' service). Wherever possible, the items supplied by Eurexpo will be installed prior to your arrival. Lighting appliances supplied by Eurexpo can be adjusted as soon as the exhibited equipment has been set up. Please note that it is not possible to install display portals or signs above the aisles between two stands. 3. TECHNICAL WORK During the equipment set-up period before the exhibition, any request for modifications can be considered only after checking the feasibility and after receipt of full payment for the new quote submitted. Any request for services during the exhibition must be made directly to the suspension sling department of the exhibition centre and, subject to their feasibility, these services will be carried out in the evening after the exhibition closes its doors to the public or in the morning before the doors open.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 3 / 14 FEASIBILITY STUDY REQUEST SUSPENSION SERVICES Please note that requests made any later than 1 can not be processed. Stand N Hall N Customer N (for Eurexpo use) EXHIBITOR COMPANY NAME STAND SIGN VAT N (finance law art. 17 2001/115/CE) Address Post Code City Country Tel Fax Company Email Contact Email COMPANY TO BE BILLED (if different) VAT N (finance law art. 17 2001/115/CE) Address Post Code City Country Tel Fax Company Email Contact Email THE FOLLOWING DOCUMENTS & INFORMATION MUST BE SUPPLIED Plan of the stand with layout of equipment to be suspended, indicating heights and locations, to a scale of 1:100 if possible, orientation with respect to aisles and neighbouring stands. Height of sling buckle, from the ground:... Description of equipment to be suspended:...... Weight of components:... Lifting method: Hoists. Number and weight... Motor. Number and weight... Lifting device on ground Do you require an estimate for: Rotating light kit. yes no Light rigs yes no Lighting yes no Power supply to drop wires yes no If yes, number of kw. Installation and removal of suspended equipment yes no The drop wires will be ready for the first day of exhibitor build-up time. If you require a different date, please state your preference:. Completed form to be returned to Catherine FUMEY/Nicolas LAURENT. A cost estimate will be sent to you. Catherine FUMEY Tel: 33 (0)4 72 22 32 93 Fax: 33 (0)4 72 22 30 63 Email: catherine.fumey@eurexpo.com Nicolas LAURENT Tel : 33 (0)4 72 22 30 72 Fax : 33 (0)4 72 22 30 63 Email : nicolas.laurent@eurexpo.com NB: ALL SUSPENSION SERVICES REQUIRE A PRIOR FEASIBILITY STUDY REQUEST. (On the Internet or by mail / fax)

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 4 / 14 ORDER FORM SUSPENSION SERVICES Please note that no order will be accepted after 13 rd may 2011. Stand N Hall N Customer N (for Eurexpo use) EXHIBITOR COMPANY NAME STAND SIGN VAT N (finance law art. 17 2001/115/CE) Address Post Code City Country Tel Fax Company Email Contact Email COMPANY TO BE BILLED (if different) VAT N (finance law art. 17 2001/115/CE) Address Post Code City Country Tel Fax Company Email Contact Email DROP WIRES : please join the feasibility study application form Réf. Description Unit price excl. VAT up to 3 rd May 2011 Unit price excl. VAT after 3 rd May 2011 906 1 to 5 points 107, 00 139.10 907 6 to 10 points 103.00 133.90 908 More than 10 points 98, 00 127, 40 956 Overhead electrical cable 1 to 3 kw 3G2,5 (fixed to the hanging point) 98, 00 127, 40 957 Overhead electrical cable 4 to 9 kw 5G2,5 (fixed to the hanging point) 150, 00 195, 00 958 Overhead electrical cable 10 to 20 kw 5G6 (fixed to the hanging point) 240, 00 312, 00 930 Rotating unit + drop wires + overhead electrical cable 526, 00 683, 80 Quantity Total price Excl VAT LIGHTING KIT : including drop wires and power supply to drop wires 933 3 m long structure + 2HQI 400 W 687, 00 934 3 m long structure + 3PAR ETC 575 W 752, 00 935 6 m long structure + 4HQI 400 W 1086, 00 936 6 m long structure + 3HQI 400 W + 4PAR ETC 575 W 1136, 00 200314 3x3 m square structure + 4HQI 400 W + 8PAR ETC 575 W 1879, 00 200315 2x4 m rectangular structure + 4HQI 400 W + 12PAR ETC 575 W 2581, 00 200316 4x6 m rectangular structure + 10HQI 400 W + 14PAR ETC 575 W 3571, 00 200317 Round structure 6 m dia. + 5HQI 400 W + 5PAR ETC 575 W 2782, 00 200318 Round structure 8 m dia. + 6HQI 400 W + 12PAR ETC 575 W 3632, 00 200319 Round structure 10 m dia. + 8HQI 400 W +16PAR ETC 575 W 4960, 00 200320 Closed semi-circular structure 6 m dia. + 5HQI 400 W + 5PAR ETC 575 W 200321 Closed semi-circular structure 8 m dia. + 6HQI 400 W + 10PAR ETC 575 W For a specific estimate, please contact us Save time, order online on www.eurexpo.com! 2646, 00 3110, 00

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 5 / 14 ORDER FORM (Cont.) SUSPENSION SERVICES SIGNAGE : 4-color digital printing, fitting and removal included, locksmith and ballast bars for rent Ref. Description Unit Price Excl VAT Quantity Total Price Excl VAT 964 Triangular sign : 2 m side length, 1 m height Recyclable material 709, 00 965 Square sign : 2 m side length, 1 m height Recyclable material 909, 00 961 1 m² : 1m x 1m recyclable material 151, 00 201960 2 m² : 2m x 1m recyclable material 221, 00 201961 Logo on 3 m² : 3m x 1m recyclable material 291, 00 both sides : 201962 Quantity : 2 4 m² : 4m x 1m recyclable material 361, 00 MORE THAN 4M² : REQUIRING AN ESTIMATE TOTAL FOR SERVICES ORDERED By placing this order, the client hereby declares to be fully aware of and accepts the general conditions governing the provision of suspension services. TOTAL Euros Excl VAT VAT at 19,6% TOTAL TO PAY Payment (full payment of price incl. VAT to be included with your order): Payment by bank card Carte Bleue Visa Eurocard Mastercard N l_l_l_l_l l_l_l_l_l l_l_l_l_l l_l_l_l_l Name: Payment by cheque made out to EUREXPO Expiry date: Signature (compulsory): Bank transfer directly to EUREXPO (Join a copy of the transfer order with your order form) Signature and company stamp Bank details: BP2L- Direction des Grandes Relations Bank Code Sort Code Account Key 13907 00000 00202033998 78 IBAN: FR76 1390 7000 0000 2020 3399 878 SWIFT/BIC: CCBPFRPPLYO For a specific estimate, please contact us: catherine.fumey@eurexpo.com or nicolas.laurent@eurexpo.com To order: - Log onto our website www.eurexpo.com «Exhibitors» category. - or return this order form to EUREXPO, Catherine FUMEY/Nicolas LAURENT, BP 190-69686 CHASSIEU CEDEX France or by Fax +33 (0)4.72.22.30.63 (except for payment by cheque) Orders sent without full payment including VAT and a complete stand plan will not be registered. Save time, order online on www.eurexpo.com!

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 6 / 14 ELECTRICITY POWER SUPPLY CONNECTED ON: 21 ST MAY 2011 Each exhibitor requiring power supplies on his/her stand must have an independent electrical connection. (Article T35, chapter VIII of the Safety Regulations concerning risks of fire or panic in public buildings decree dated 25/06/1980). ELECTRIC SUPPLY ON STANDS Supply Description Use From 3 to 20 kw daytime/round-the-clock supply Service terminal with - 2 single phase sockets 220 V 10A max 3kW - 1 three phase socket 380 V 32 A BE CAREFUL: In order to use more than 3kW at one time, use a P17 32A plug. From 25 to 40 kw daytime/round-the-clock supply From 60 to 80 kw daytime/round-the-clock supply Electrical cabinet with terminal block Electrical cabinet with leads BE CAREFUL: Plan a distribution cabinet or a connection service BE CAREFUL: Plan a distribution cabinet or a connection service Power supply is not necessarily included in your stand rental. CHECK THE STAND SPECIFICATION INSTRUCTIONS: 1. Check whether the supply of electricity is included in the description of your stand. 2. Depending on the equipment you are using (track with spotlights, machines, computers, etc.), establish the power you require in kw. 3. Choose the time periods when you require the connection to be activated: a) Intermittently (only during exhibition opening times) b) Permanently (24 hours a day) 4. Check the prices indicated on the order form at the end of this document. Some examples of power consumption: Vacuum cleaner: 1, 5 kw Water heater 15L: 1, 2 kw Microwave oven: 1 kw Computer: 0, 4 kw Coffee machine: 0, 8 to 4 kw Rack with 3 spotlights: 0, 3 kw Refrigerator: 0, 4 kw LOCATION OF CONNECTIONS Unless you provide specific instructions, connections will be installed by default in the closed corner of the stand, in the middle of the back wall, and in the centre of island stands (see general conditions for providing services). If you require a specific location, please complete the diagram at the end of this document. Complete list of services and prices: see the order form TECHNICAL SERVICES, at the end of this document.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 7 / 14 ADDITIONAL SERVICES ELECTRICAL EQUIPMENT FOR RENTAL Additional or remote sockets: - 10 amp single-phase or 3 kw maximum (French domestic socket) - 16 amp three-phase or 10 kw. This service includes: connection to the terminal, the electrical cable, the socket and installation at the required location. Please send a drawing showing the exact position of the socket(s). Distribution cabinet including: - 6 sockets 2 x 10 A + T - 2 sockets P17 3 x 16 A + N + T - 1 socket 413 type 2 x 16 A + N + T CONNECTIONS Connections packages are available to make the electrical distribution (after the electrical box). You can also rent a distribution cabinet and make the electrical distribution of your equipment by yourself. MACHINE START-UP To enable connection of machines which need a starting current over 30mA but under 300 ma, you can order a machine startup in addition to your main power supply. OUTDOOR ELECTRICAL CONNECTION Eurexpo can provide an outdoor electrical connection for a vehicle or container requiring electricity. Contact the Exhibitors' Department for an estimate. SPECIFIC REQUIREMENTS Whatever your needs, from energy supply to the complete wiring of your installation, we have the right solution. Contact Exhibitors Services for a cost estimate. Complete list of services and prices: see the order form TECHNICAL SERVICES, at the end of this document.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 8 / 14 WATER THE BASIC WATER CONNECTION INCLUDES: water supply via a flexible pipe ending in a 15/21mm diameter stop cock waste water removal via a 40/49 mm diameter flexible pipe water consumption throughout the exhibition ADDITIONAL SERVICES: single sink double sink 15l water heaters (150 and 200 litre available on request) a secondary connection from the main one connection of your equipment Additional equipment is installed the final day of build-up. Important: - Installation of a false floor to hide and protect the supply and disposal pipes is strongly recommended. - Certain stand locations in Hall 8 and Galleries A, B and C cannot be fitted with water supply and disposal pipes. For further information contact Exhibitors' Services. It is your responsibility to provide a stand plan / diagram indicating the position of your ordered services, including details of neighbouring stands and aisles, and stand measurements. Please instruct your contractors to route the pipes through any stand construction (and carpet) to the final service location. Complete list of services and prices: see the order form TECHNICAL SERVICES, at the end of this document.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 9 / 14 TELECOMMUNICATIONS TELEPHONES Rental of telephone landline which can be used for an analogue telephone, fax or payment terminal (not provided by Eurexpo). This service includes a basic package of 700 calling units. You will receive a free analogue phone with every telephone line subscription (to be collected from the Exhibitors Welcome Office during build-up time). If you exceed this quantity, you can order a «top -up» package at the Exhibitors Reception Area. ADDITIONAL SERVICES Rental of fax / copier B & W, including the phone line with 700 calling unit package Rented equipment is delivered to the stand on the day before the exhibition opens, in return for a deposit of 600 for the fax. It is your responsibility to provide a stand plan / diagram indicating the position of your ordered services, including details of neighbouring stands and aisles, and stand measurements. Please instruct your contractors to route the cabling through any stand construction (and carpet) to the final service location. INTERNET CONNECTIONS Our standard Internet connections provide a guaranteed symmetrical bandwidth of 512 kbps or 1Mbps (DHCP connexion). If you require a public IP address, please select the option in the order form. It is your responsibility to provide a stand plan / diagram indicating the position of your ordered services, including details of neighbouring stands and aisles, and stand measurements. Please instruct your contractors to route the cabling through any stand construction (and carpet) to the final service location. Important: Exhibitors own wireless networks are not permitted due to the interference they cause. Please contact us to discuss any specific requirements using our wireless network WIRELESS INTERNET CONNECTIONS Individual wireless connections, 256 kbps bandwidth unsecured. Wifi connections can be used anywhere within the exhibition. Each computer must have its own individual access. SPECIFIC REQUIREMENTS Please contact the Exhibitors' Department for a detailed study of any specific Internet requirements. Telephone and Internet cables are usually installed before build-up. However, services will be available on the final day of build-up. Complete list of services and prices: see the order form TECHNICAL SERVICES, at the end of this document.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 10 / 14 WASTE DISPOSAL After dismantling their stands, all exhibitors are required to clear their area of any refuse or expendable fittings (carpet, wood panels, leaflets, adhesive tape, etc.). In accordance with government act 92-646 of 12 th July 1992, exhibitors are personally responsible for their waste and their subcontractors waste, for its removal from site to a destination that complies with current regulations covering the environment and waste sorting. 30 m 3 skip rental available on request. Please contact Exhibitors Services for a cost estimate. PARKING CARDS DEADLINE FOR POSTAGE 22 nd April 2011. One parking card is included in your subscription s fees. This card will not be sent. Parking cards, for which a charge is made, are required to enter the Eurexpo exhibitors' car park throughout the entire period the exhibition is open to the public. Exhibitors may park close to the exhibition hall entrances. Access to the car park is free during the build-up and break-down periods. SECURITY IN THE EXHIBITORS' CAR PARK Access to the exhibitors' car park is controlled. The exhibitors' car park is not under surveillance. The charge covers parking rights and not security surveillance. Owners leave their vehicles in the park at their own risk. It is strictly forbidden to park vehicles in the priority lanes reserved for the fire and security services. Card holders must comply with Eurexpo regulations, which are displayed on the site. It is strictly forbidden to park heavy goods vehicles around the halls during the period the exhibition is open to the public. You will be guided to a free "HGV" parking area on arrival at the site. Important: No refund will be made for cards that have been ordered but not used. DRINKS The coffee machine is delivered with a kit including 200 capsules of premium blend coffee, 200 x 15cl plastic cups, 200 sachets packets of sugar and 200 stirrers. A refill with 100 units is available. The mini water fountain is delivered with starter kit comprising 2 carboys of 5 litres of water and 100 plastic cups of 15 cl. A refill with 2 carboys of 5 litres of water (and 100 plastic cups). Kit delivered to the stand on the eve of the show opening. You will be asked for a deposit cheque of 500 for coffee machine and 200 for water fountain payable to «Saveur Express O» on delivery ; this will not be cashed unless damages are payable. Important : An electrical socket is needed for this order. Electric consumption: coffee machine = 1, 3 kw and mini water fountain = 200 W. Complete list of services and prices: see the order form TECHNICAL SERVICES, at the end of this document.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 11 / 14 GENERAL CONDITIONS FOR PROVIDING SERVICES (Electricity, water, telephone, Internet) 1. CONDITIONS OF SALE A complete list of services and prices is given on the specific order form for each exhibition. A 30% surcharge will be applied to any order sent after the specific deadline for the exhibition. Orders should be placed on line at the centre's website www.eurexpo.com EXHIBITORS tab. You may also use the Technical Services Order Form appended to this document and return it to us with the corresponding payment in full. Payment must be made on placing orders. No order will be registered if it not accompanied by the corresponding payment. Prices include the cost of installing rented equipment, energy and fluid consumption and assistance-repairs during the entire period the equipment is rented. Any request for modification or cancellation of the order must be made no later than 8 working days before the start of the exhibition and sent in writing to the Exhibitors' Department. Any services provided must be paid in full. 2. LOCATION OF CONNECTIONS Unless you provide specific instructions, connections will be installed by default in the closed corner of the stand, in the middle of the back wall, and in the centre of island stands. Stand with 4 open corners Stand with no open corner Stand with 2 open corners Stand with 1 open corner If you require a specific location, please send us a drawing of your stand with dimensions, directions and details of aisles and neighbouring stands, clearly showing the positions required. We advise you to use the plan on the last page of this document. If you do not have a false floor, cables and pipes will be visible on your stand between the points of connection in the technical ducts and the locations where the equipment is installed. For this reason, it is advisable to situate the connections as near as possible to the technical ducts. Exhibitors are reminded that they are responsible for the installations needed to protect pipes without affecting the appearance of their stand (false floor, cable trays, etc.). Any request to move a connection once it has been installed will be billed at the rates available from the Exhibitors' Reception Area. The connections described in this guide are on the ground and inside the halls. Estimates must be requested for outdoor and mezzanine connections. 3. TECHNICAL WORK Any request for work on site must be made in person at the Exhibitors' Reception Area or by calling +33 ( 0)4.72.22.30.25. The centre's technicians are not authorised to work on equipment installed by third parties. 4. REMINDERS A connection may supply only one stand. Exhibitors are responsible for equipment installed on their stands for the entire duration of the exhibition.

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 12 / 14 ORDER FORM EquipVille LumiVille InLight Expo 2011 Deadline for placing orders (without surcharge): 3rd May 2011. A 30% surcharge will be applied to any order (prices in right-hand column) received after this date. Stand n Hall n Customer's n (SEPEL customers only) COMPANY NAME STAND NAME Intracommunitary VAT number Address Post code Town Country Tel Fax Company email Contact Email INVOICING COMPANY (if different) Address Post code Town Country Tel Fax Company email Contact Email INTERMITTENT POWER SUPPLY (during exhibition hours) REF kw DESCRIPTION Unit price exc. VAT up to 3rd May 11 Unit price exc. VAT after 3rd May 11 681 3 3 kw daytime 344,62 448,01 682 4 4 kw daytime 394,12 512,36 683 5 5 kw daytime 439,21 570,97 686 6 6 kw daytime 482,61 627,39 687 10 10 kw daytime 623,56 810,63 688 15 15 kw daytime 719,50 935,35 689 20 20 kw daytime 790,22 1 027,29 690 25 25 kw daytime 845,31 1 098,90 691 30 30 kw daytime 906,91 1 178,98 692 40 40 kw daytime 1 004,31 1 305,60 693 60 60 kw daytime 1 139,91 1 481,88 694 80 80 kw daytime 1 857,98 2 415,37 PERMANENT POWER SUPPLY (24/24) Quantity Total price exc. VAT 698 3 3 kw 24/24 429,44 558,27 699 4 4 kw 24/24 487,43 633,66 700 5 5 kw 24/24 540,19 702,25 702 6 6 kw 24/24 590,20 767,26 703 10 10 kw 24/24 729,89 948,86 704 15 15 kw 24/24 859,13 1 116,87 705 20 20 kw 24/24 934,56 1 214,93 706 25 25 kw 24/24 1 014,45 1 318,79 707 30 30 kw 24/24 1 099,52 1 429,38 708 40 40 kw 24/24 1 242,00 1 614,60 709 60 60 kw 24/24 1 443,36 1 876,37 710 80 80 kw 24/24 2 297,70 2 987,01 ADDITIONAL ELECTRICAL EQUIPMENT 9005 Additional single-phase socket (remote) 48,12 62,56 9007 Additional three-phase socket (remote) 67,13 87,27 926 Machine start-up - switch to 300 ma 96,86 125,92 9024 P17 adapter + 3 x 10A sockets protected by individual circuit-breakers 174,19 226,45 9699 Distribution cabinet with 6P 2x10A+E, 2P 3x16A+E+N (P17 type), 1P 2x16A+E+N (413 type) for electric box until 20 KW. 154,42 200,75 Save time, order on line on www.eurexpo.com

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 13 / 14 WATER ORDER FORM (cont.) EquipVille LumiVille InLight Expo 2011 REF Unit price exc. VAT up to 3rd May 11 Unit price exc. VAT after 3rd May 11 724 Water supply 352,72 458,54 725 Water supply + sink 520,38 676,49 732 Water supply + sink + 15l instantaneous water heater 699,13 908,87 728 Connection to your installation (price per item of equipment) 98,94 128,62 734 Diversion (secondary connection from main supply) 200,14 260,18 TELEPHONE AND INTERNET DESCRIPTION Quantity Total price exc. VAT 715 Analogue phone line with 700 calling unit package 235,00 305,50 843 B&W fax-copier with 700 calling unit package 430,00 559,00 722 Broadband cable Internet access 512k 460,00 598,00 841 Broadband cable Internet access 1 M 820,00 1 066,00 854 Public IP address 25,00 25,00 735 Connection support, for 1 computer 54,00 54,00 847 Network settings, for 1 computer 85,00 85,00 857 RJ45 network cabling 50,00 65,00 645 8 port switch rental, for 7 computers max 85,00 85,00 746 Wireless Internet access 256k, not secured, not guaranteed for 1 computer 190,00 190,00 Reminder: You must pay a deposit of 600 for the fax. EXHIBITORS' PARKING PLACES 750 Exhibitor's parking card 30,94 30,94 899 Postage cost (irrespective of number of cards) 3,00 unavailable Name and address of person to whom cards should be sent (if different from billing address) before 22/04/11 DRINKS MACHINES 1200 Coffee machine + kit of 200 Lavazza coffee capsules 166,63 166,63 1201 Refill of 100 Lavazza coffee capsules 71,40 71,40 1209 Water dispenser + 10 litres of mineral water 77,01 77,01 1210 Refill of 10 l of mineral water 15,30 15,30 Reminder: You must pay a deposit of 500 per coffee machine and 200 per water dispenser upon delivery. Name and mobile number of person to be contacted for delivery (in return for deposit): TOTAL SERVICES ORDERED In signing this order, customers acknowledge that they have read and agree to abide by the general conditions of service set forth in the Centre's Technical Services Guide. PAYMENT (Payment is compulsory at the time of order) By credit card: VISA EUROCARD MASTERCARD N Expiry date: TOTAL ( exc. VAT) VAT (19.6%) GRAND TOTAL Date: Signature and company stamp Cardholder name : Cardholders signature: By cheque to SEPEL/EUREXPO for full amount (incl. VAT) By bank transfer for the total amount (Incl VAT) to SEPEL Bank details: BP2L - Direction des Grandes Relations (Please send us proof of bank transfer) Bank code Sort Code Account number Key 13907 00000 00202033998 78 IBAN : FR76 1390 7000 0000 2020 3399 878 SWIFT / BIC : CCBP FRPPLYO TO ORDER: Please go to our website www.eurexpo.com, or return this order form to: EUREXPO, Service Exposants, BP 190, 69686 CHASSIEU CEDEX, France, tel:+33 (0)4.72.22.30.30, fax: +33 (0)4.72.22.32.32 No order will be taken unless accompanied by payment in full (including VAT) Save time, order on line on www.eurexpo.com

EquipVille LumiVille InLight Expo 2011 24th-26th May 2011 GUIDE TO TECHNICAL SERVICES Page 14 / 14 DRAWING OF YOUR INSTALLATION to be returned with your order - EquipVille LumiVille InLight Expo 2011 - Stand no. Company name Instructions: 1. Show the orientation by indicating the numbers of surrounding aisles and stands 2. Use whatever scale you choose and show the locations of the various connections by using the following symbols: ELECTRICAL CABINET REMOTE SOCKET WATER TELEPHONE T INTERNET @ Exact dimensions of stand: m x m Compulsory technical information: Do you have a false floor 12cm high? Yes, date of installation: No REMINDER: If you do not have a false floor, cables and pipes will be visible on your stand between the points of connection in the technical ducts and the locations where the equipment is installed. For this reason, it is advisable to situate the connections as near as possible to the technical ducts. Exhibitors are reminded that they are responsible for the installations needed to protect pipes without affecting the appearance of their stand (false floor, cable trays, etc.).