All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification Material Grade WPB (ASTM A24 - Line Pipe) Material Grade J-55, K-55, L-80, N-80 (API 5CT - Oil Country s) Full Traceability All J.B. Smith products conform to the following applicable specifications: API 5B Threading Oil Country size API 5CT Raw material, Process, End Finish (Oil Country s) ASME B.20. Threading Line Pipe ASME B6.9 Weld Bevels MSS SP-95 Swage and Bull Plug ASTM A24 WPB Raw material, Process, End Finish (Line Pipe High Temp) ASTM A420 WPL6 Raw material, Process, End Finish (Line Pipe Low Temp) ASTM B6 Type III Class III Zinc Electroplate NACE MR-0-75 As Applicable J.B. Smith oil country tubular fittings, swages and bull plugs add an important dimension to the industry s leading line of flow control products offered by Anvil. J.B. Smith is a respected name and its products are well known for high quality and consistency. j.b. Smith products Raw Material Code Each is stamped with unique JBS material code for traceability to material type, details of purchase and mill test report. Heat Treatment Items made to specification grades requiring final heat treatment bear an additional two letter code for heat treatment traceability. 4 PF-6.
, Bull Plugs, Oil Country, Couplings, Stainless Swages Manufacturing Specification J.B. Smith manufactures swage nipples and bull plugs in accordance to the applicable specification, API 5CT, ASTM A24, MSS SP-95. Materials include ASTM A06, GR B seamless pipe, A-000 low to medium carbon, fine grain bar stock, API grades J-55 through N-80 tubing and casing, processed and heat treated to applicable specification requirements. Fitting chemical and physical properties fall within the ranges listed below. All fittings are manufactured in the U.S.A. Traceability All material purchased by J.B. Smith is fully traceable to the mill source. A unique JBS material code appears on all products made since the institution of this program. As a result, mill test reports are now available at any time on products so coded (See EXTRAS for MTR charges.) Pressure Ratings Due to the wide variation in service conditions, temperature, vibrations, etc., J.B. Smith Mfg. can make no recommendations as to allowable working pressure of swage nipples and bull plugs. There are a number of working pressure formulas from which the end user may choose to determine the required wall thickness of the piping system. It is our responsibility only to furnish a fitting with end dimensions equal to those of the pipe size and schedule ordered. Material Certification J.B Smith certifies that the material used to manufacture line pipe sizes of swage nipples and bull plugs has be processed to comply with the requirements of ASTM A24 grade WPB and the chemical and physical properties of the fittings fall within the ranges listed below. Marking All J.B. Smith fittings are permanently marked as follows: Manufacturer s symbol - Material Specification or Grade WBP (Line Pipe s) J-55, K-55, L-80, N-80 (Oil Country s) Raw Material Code - Each part is die stamped with unique JBS material code for traceability to material type, details of purchase and mill test report. Heat Treatment - Heat treatments are performed to ASTM A24 WPB or API 5CT specification grade requirement as applicable. bear a two letter code provide traceability to final heat treatment. Threading Line Pipe, Tubing and Casing threads conform to ASME B.20. B or API 5B as applicable. Oil Country Industry Thread Color Code Industry Color Codes as follows: 8R - Red 0R - Yellow 0V - Blue 2V - Green LP - Silver Coatings Zinc Electroplate - ASTM B6 Type III Class III Paint (Weld Bevel Ends) Weld Bevels Weld bevels are machined per ASME B6.9 specifications. Chemical and Physical Requirements API 5CT Material Chemical Requirements Grp Gr C Mn Mo Cr Ni Cu P S Si J55 0.00 Max 0.00 Max K55 0.00 Max 0.00 Max N80 Type 0.00 Max 0.00 Max 2 L80 Type 0.4 Max.90 Max 0.25 Max 0.5 Max 0.00 Max 0.00 Max 0.45 Max Physical Requirements Grp Gr Total Elongation under load % Yield Strength ksi Tensile Strength ksi Hardness J55 0.5 55-80 75 K55 0.5 55-80 95 N80 Type 0.5 80-0 00 2 L80 Type 0.5 80-0 95 2 24 Note: made from bar or plate may have 0.5 Max Carbon. made from forgings may have a 0.5 Max Carbon and 0.5 Max Silicon. For each reduction of 0.0% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted, up to a maximum of.5%. The sum of Copper, Nickel Chromium and Molybdenum shall not exceed.00%. The sum of Chromium and Molybdenum shall not exceed 0.2%. 42 PF-6.
Line Pipe Swages Nominal Pipe range 8 8 NPS (6 200 DN) Manufactured from A06 Gr. B seamless pipe or hex bar and processed in accordance to ASTM A24 Gr. WPB Choice of material depends upon size and reduction Available in standard, extra heavy, double extra heavy or schedule 60 End finishes available: NPT, weld beveled, squared cut (for socket weld) or grooved Available concentric and eccentric " (25mm) and smaller are made from hex bar 4" (2mm) and larger are made from pipe Concentric Pipe API or O.D. Reduced to XXS/XXH & Sch. 60 NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg 4 8 0.540 4 8 6 2 4 57 0.25 0. 8 0 0.675 7 2 5 0.840 2 4 20.050 27 8 6 2 2 64 0.25 0. 0.8 0.7 4 8 2 2 64 0.25 0. 0.8 0.7 8 6 2 4 70 0. 0.5 0.50 0.2 4 and 8 8 and 0 2 4 70 0. 0.5 0.50 0.2 8 6 76 0.50 0.2 0.75 0.4 4 and 8 8 and 0 76 0.50 0.2 0.75 0.4 2 5 76 0.50 0.2 0.75 0.4 8 6 2 89 0.66 0.0.00 0.45 25.5 4 and 8 8 and 0 2 89 0.66 0.0.00 0.45 2 and 4 5 and 20 2 89 0.66 0.0.00 0.45 Note: See page 42 for certification of raw material and marking. Select sizes of NPS (25 DN) and smaller swages in and Schedule 60 weights available in A06. All sizes on this page have been processed in a manner strictly conforming to the requirements of ASTM A24 from material fully meeting all requirements of that specification. The correct marking for swage nipples to denote conformance with this specification is WPB. All sizes NPS (25 DN) and smaller will be made from hex barstock. Most sizes 4 NPS (2 DN) and larger will be made from pipe, and where pipe is not a practical raw material, round barstock will be used. No sacrifice of properties will result from such practice. 4 PF-6.
Concentric Pipe API or O.D. Reduced to XXS/XXH & Sch. 60 NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg 4 and 8 8 and 0 4 02.00 0.45.5 0.68 4 2.660 42 2 and 4 5 and 20 4 02.00 0.45.5 0.68 25 4 02.00 0.45.5 0.68 4 and 8 8 and 0 4 2 4.2 0.5 2.0 0.9 2 40.900 48 2 and 4 5 and 20 4 2 4.2 0.5 2.0 0.9 25 4 2 4.2 0.5 2.0 0.9 4 2 4 2 4.2 0.5 2.0 0.9 4 and 8 8 and 0 6 2 65.0.4 4..9 2 and 4 5 and 20 6 2 65.0.4 4..9 2 50 2 8 60 25 6 2 65 2.0 0.9 2.. 4..9 4 2 6 2 65 2.0 0.9 2.. 4..9 2 40 6 2 65 2.0 0.9 2.. 4..9 2 and 4 5 and 20 7 78.5.6 8.0.6 25 7 78.0.4.5.6 8.0.6 2 2 65 2 7 8 7 4 2 7 78.0.4.5.6 8.0.6 2 40 7 78.0.4.5.6 8.0.6 2 50 7 78.0.4.5.6 8.0.6 2 and 4 5 and 20 8 20 6.0 2.7 5.0 25 8 20 4.5 2.0 6.0 2.7 5.0 80 2 89 4 2 8 20 4.5 2.0 6.0 2.7 5.0 2 40 8 20 4.5 2.0 6.0 2.7 5.0 2 and 2 2 50 and 65 8 20 4.5 2.0 6.0 2.7 5.0 2 90 4 00 2 thru 2 5 thru 40 8 20 5.5 2.5 7.5.4 4 6. 2 90 4 00 2 thru 2 5 thru 40 8 20 5.5 2.5 7.5.4 4 6. 2 thru 50 thru 80 8 20 5.5 2.5 7.5.4 4 6. 2 and 4 5 and 20 9 229 0.0 4.5 8 8.2 25 9 229 7.5.4 0.0 4.5 8 8.2 4 00 4 2 4 4 and 2 2 and 40 9 229 7.5.4 0.0 4.5 8 8.2 2 50 9 229 7.5.4 0.0 4.5 8 8.2 2 2 65 9 229 7.5.4 0.0 4.5 8 8.2 and 2 80 and 90 9 229 7.5.4 0.0 4.5 8 8.2 thru 2 25 thru 40 279 2 5.2 7 7.7 5 5 25 5 9 6 40 2 and 2 2 50 and 65 279 2 5.2 7 7.7 5 and 2 80 and 90 279 2 5.2 7 7.7 5 4 00 279 2 5.2 7 7.7 5 thru 2 25 thru 40 2 05 7 7.7 25 46 2 2 and 2 2 50 and 65 2 05 7 7.7 25 46 2 6 50 6 5 8 68 and 2 80 and 90 2 05 7 7.7 25 46 2 4 00 2 05 7 7.7 25 46 2 5 25 2 05 7 7.7 25 46 2 2 thru 50 thru 80 0 29 44 20 78 5 8 200 8 5 8 29 4 and 5 00 and 25 0 29 44 20 78 5 6 50 0 29 44 20 78 5 Note: See page 42 for certification of raw material and marking. 44 PF-6.
Eccentric Pipe API or O.D. Reduced to Note: See page 42 for certification of raw material and marking. s not shown - P.O.A. XXS/XXH & Sch. 60 NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg 4 8 0.540 4 8 6 2 4 57 0.6 0.07 0.25 0. 8 0 0.675 7 8 6 2 2 64 0.25 0. 0.8 0.7 4 8 2 2 64 0.25 0. 0.8 0.7 2 5 0.840 2 4 and 8 8 and 0 2 4 70 0. 0.5 0.50 0.2 4 20.050 27 4 and 8 8 and 0 76 0.50 0.2 0.75 0.4 2 5 76 0.50 0.2 0.75 0.4 25.5 4 and 8 8 and 0 2 89 0.66 0.0.00 0.45 2 and 4 5 and 20 2 89 0.60 0.27.00 0.45 4 2.660 42 2 and 4 5 and 20 4 02.00 0.45.5 0.68 25 4 02.00 0.45.5 0.68 2 and 4 5 and 20 4 2 4.2 0.5 2.0 0.9 2 40.900 48 25 4 2 4.2 0.5 2.0 0.9 4 2 4 2 4.2 0.5 2.0 0.9 4 and 8 8 and 0 6 2 65.0.4 4..9 2 and 4 5 and 20 6 2 65.0.4 4..9 2 50 2 8 60 25 6 2 65 2.0 0.9 2.. 4..9 4 2 6 2 65 2.0 0.9 2.. 4..9 2 40 6 2 65 2.0 0.9 2.. 4..9 25 7 78.5.6 8.0.6 2 2 65 2 7 8 7 4 2 7 78.0.4.5.6 8.0.6 2 40 7 78.0.4.5.6 8.0.6 2 50 7 78.5.6 8.0.6 2 and 4 5 and 20 8 20 6.0 2.7 5.0 25 8 20 4.5 2.0 6.0 2.7 5.0 80 2 89 4 2 8 20 4.5 2.0 6.0 2.7 5.0 2 40 8 20 4.5 2.0 6.0 2.7 5.0 2 and 2 2 50 and 65 8 20 4.5 2.0 6.0 2.7 5.0 2 90 4 02 All reductions All reductions 8 20 5.5 2.5 7.5.4 4 6. 25 9 229 7.5.4 0.0 4.5 8 8.2 4 and 2 2 and 40 9 229 7.5.4 0.0 4.5 8 8.2 4 00 4 2 4 2 50 9 229 7.5.4 0.0 4.5 8 8.2 2 2 65 9 229 7.5.4 0.0 4.5 8 8.2 and 2 80 and 90 9 229 7.5.4 0.0 4.5 8 8.2 45 PF-6.
Stainless Steel Stainless Swages Stainless & Alloy Steel 04 Stainless Steel 6 Stainless Steel NPS DN in mm NPS DN in mm 4 x 8 8 x 6 2 4 57 4 x 8 8 x 6 2 4 57 8 x 4 0 x 8 2 2 64 8 x 4 0 x 8 2 2 64 2 x 4 5 x 8 2 4 70 2 x 4 5 x 8 2 4 70 2 x 8 5 x 0 2 4 70 2 x 8 5 x 0 2 4 70 4 x 4 20 x 8 76 4 x 4 20 x 8 76 4 x 8 20 x 0 76 4 x 8 20 x 0 76 4 x 2 20 x 5 76 4 x 2 20 x 5 76 x 4 25 x 8 2 89 x 4 25 x 8 2 89 x 2 25 x 5 2 89 x 2 25 x 5 2 89 x 4 25 x 20 2 89 x 4 25 x 20 2 89 4 x 2 2 x 5 4 02 4 x 2 2 x 5 4 02 4 x 4 2 x 20 4 02 4 x 4 2 x 20 4 02 4 x 2 x 25 4 02 4 x 2 x 25 4 02 2 x 2 40 x 5 4 2 4 2 x 2 40 x 5 4 2 4 2 x 4 40 x 20 4 2 4 2 x 4 40 x 20 4 2 4 2 x 40 x 25 4 2 4 2 x 40 x 25 4 2 4 2 x 4 40 x 2 4 2 4 2 x 4 40 x 2 4 2 4 2 x 2 50 x 5 6 2 65 2 x 2 50 x 5 6 2 65 2 x 4 50 x 20 6 2 65 2 x 4 50 x 20 6 2 65 2 x 50 x 25 6 2 65 2 x 50 x 25 6 2 65 2 x 4 50 x 2 6 2 65 2 x 4 50 x 2 6 2 65 2 x 2 50 x 40 6 2 65 2 x 2 50 x 40 6 2 65 2 2 x 65 x 25 7 78 2 2 x 65 x 25 7 78 2 2 x 4 65 x 2 7 78 2 2 x 4 65 x 2 7 78 2 2 x 2 65 x 40 7 78 2 2 x 2 65 x 40 7 78 2 2 x 2 65 x 50 7 78 2 2 x 2 65 x 50 7 78 x 80 x 25 8 20 x 80 x 25 8 20 x 4 80 x 2 8 20 x 4 80 x 2 8 20 x 2 80 x 40 8 20 x 2 80 x 40 8 20 x 2 80 x 50 8 20 x 2 80 x 50 8 20 x 2 2 80 x 65 8 20 x 2 2 80 x 65 8 20 4 x 00 x 25 9 229 4 x 00 x 25 9 229 4 x 4 00 x 2 9 229 4 x 4 00 x 2 9 229 4 x 2 00 x 40 9 229 4 x 2 00 x 40 9 229 4 x 2 00 x 50 9 229 4 x 2 00 x 50 9 229 4 x 2 2 00 x 65 9 229 4 x 2 2 00 x 65 9 229 4 x 00 x 80 9 229 4 x 00 x 80 9 229 4 x 2 00 x 90 9 229 4 x 2 00 x 90 9 229 Note: See page 42 for certification of raw material and marking. Other types and sizes available on application. For other alloy raw material, Consult factory. Mill test reports furnished upon request only. Options: E.L.C. Grades of Stainless; Eccentrics; Schedule 0 (no threads) - XXH; Schedule 60 & XXS/XXH; Concentric; Schedule 0, 40, 80, 60 and XXH (Including Eccentric) 46 PF-6.
Bull Plugs Line Pipe Bull Plugs Nominal Pipe range 8 8 NPS (6 200 DN) Nominal Pipe 2 (50 DN) and smaller bull plugs are manufactured from bar which is processed in accordance with ATM A24 Gr. WPB Nominal Pipe 2 2 8 (65 200 DN) bull plugs are manufactured from A06 Gr. B seamless pipe using J.B. Smith's unique forming process which ensures uniform wall thickness Bull Plugs available in standard, extra heavy, double extra heavy, schedule 60 or solid All J.B. Smith bull plugs can be tapped End finishes available: NPT, weld beveled, squared cut (for socket weld) or grooved Bull Plugs Pipe API or O.D. Solid XXS/XXH & Sch. 60 NPS DN in mm in mm lbs kg lbs kg lbs kg lbs kg 8 6 0.405 0 2 5 0.0 0.05 0.20 0.09 0.40 0.8 4 8 0.540 4 2 5 0. 0.05 0.20 0.09 0.40 0.8 8 0 0.675 7 2 4 57 0.4 0.06 0. 0.5 0.28 0. 2 5 0.840 2 2 2 64 0. 0.5 0.50 0.2 0.50 0.2 4 20.050 27 2 4 70 0.50 0.2 0.80 0.6 0.75 0.4 25.5 76 0.66 0.0.4 0.6.00 0.45 4 2.660 42 4 8.00 0.45 2..0.5 0.68 2 40.900 48 2 89.2 0.5.0.4 2.0 0.9 2 50 2 8 60 4 02 2..0 2.5. 5.0 2..5.6 2 2 65 2 7 8 7 5 27.0.4.5.6 8.0.6 80 2 89 6 52 4.5 2.0 6.0 2.7 5.0 2 90 4 02 6 2 65 5.5 2.5 7.5.4 4 6. 4 00 4 2 4 7 78 7.5.4 0.0 4.5 8 8.2 5 25 5 9 6 4 8 2 26 5.7 7 7.7 5 6 50 6 5 8 68 0 254 7 7.7 25 46 2 8 200 8 5 8 29 279 29 44 20 78 5 Solid Refinery Plugs Black (non-plated) NPS DN in mm 8 6 76 4 8 76 8 0 76 2 5 76 4 20 76 25 76 4 2 76 2 40 76 2 50 76 Smith solid black refinery plugs have been especially designed for refinery use. The body length leaves sufficient length for easy wrench application. Material conforms to ASTM-A 24 Grade WPB. Hex Heads 4" thru 2" are available. 47 PF-6.