Online Monitoring Webserver V1.0 1
IMPRINT Original User Manual Online Monitoring Webserver V1.0 China Address: No.2 Tianhe Road, Trina PV Industrial Park, New District, Changzhou, Jiangsu Postcode: 213031 E-mail: trinabess@trinagroup.com Fax: +86-519-81588398 Telephone: +86-519-85176686 Japan Address: 21F World Trade Center Building, 4-1, 2-chome, Hamamatsu-cho, Minato-ku, Tokyo 105-6121 Japan E-mail: trinabess@trinagroup.com EU Trina Energy Storage Vertrieb und Service GmbH Add: Otto-Schott-Str.4, 60438, Frankfurt, Germany Tel: +49 (0) 69 75844 361 E-Mail: trinabess@trinagroup.com Web: www.trinaenergystorage.com ROW Trina Energy Storage Solutions (Singapore) PTE. Ltd. Add: 80 Robinson Road, #02-00, Singapore (068898) E-Mail: trinabess@trinagroup.com Web: www.trinaenergystorage.com Copyright Statement This manual is under the copyright of Trina Energy Storage Solutions (Jiangsu) Co., Ltd., with all rights resevered. Trina Energy Storage Solutions (Jiangsu) Co., Ltd., ceaselessly strives to innovate and provide system solutions for our customers. This user s manual uses accurate and reliable information as a starting point, however with regards to the product design and technical specification updates, our company reserves the right to make changes at any time without prior notice. This user s manual is for reference only. Strictly observe all operating instructions and warnings and keep this user s manual. Do not operate this system without having completely read all safety and operating instructions. 2
Content 1 First Log-in... 4 1.1 Web Page... 4 1.2 Create New User... 4 1.3 Recovery of Password... 5 1.4 Logout... 5 1.5 Modify Personal Password... 6 2 Online Overview... 7 2.1 Menu Bar... 7 2.2 Basic Information of Device... 8 2.3 Basic Energy Statistics... 8 2.4 Real-time System Diagram... 8 2.4.1 PV Power... 9 2.4.2 Battery Data... 9 2.4.3 Grid Power... 10 2.4.4 Load Power... 10 2.4.5 Inverter Data... 10 2.5 Location... 12 2.6 Language... 12 3 Online Monitoring... 13 3.1 Power Diagram... 13 3.2 History Data... 13 3.2.1 Statistical Diagram... 13 3.2.2 Energy Diagram... 13 3.2.3 Efficiency Diagram... 14 4 Register of Illustrations... 15 3
1 First Log-in 1.1 Web Page You have to create a new user on our webserver, so that the monitoring is working correctly. So please follow these steps: Open the website cloud.trinabess.com. If you have already registered, please fill in Username & Pass Word and click Login. If not, please register according to chapter 1.2 Create new user. Figure 1. Login 1.2 Create New User In this form, all blanks marked with a * must be filled out. Dealer/Installer: End User. * Username: free to create (with 5-15 letters/figures). Caution: when Username is created, it can t be changed. * Email Address: fill in a frequently-used email address. (in case of forgetting the actual password) * Hybrid: the type of your device, it can be selected Hybrid only. * Device Serial Number: EMS serial number (on the right side of your inverter). * Location: choose the address of your device on the google map. * Password: 5-15 letters/figures etc. * Confirm Password. Figure 2. Registration 4
1.3 Recovery of Password 1 If you forgot your password, please click Forgot password on the login page. Following windows will pop up to reset your password: 2 Fill out your Username and Email Address and send it by clicking the button OK. You will now receive an email in your mailbox with your Username. Figure 3. Recovery of Password 1.4 Logout Figure 4. Logout Please always logout after finishing your monitoring to ensure that nobody uses your account without permission. Click this button to log out from the web server. 5
1.5 Modify Personal Password Click the link, you can change your password by inputting your email. Figure 5. Modify Password 6
2 Online Overview 2.5 2.2 2.4 2.6 2.4.1 2.4.3 2.1 2.4.5 2.3 2.4.2 2.4.4 Figure 6. Online Overview 2.1 Menu Bar 2.2 Basic Information of Device 2.3 Basic Energy Statistics 2.4 Real-time System Diagram 2.4.1 PV Power 2.4.2 Battery Data 2.4.3 Grid Power 2.4.4 Load Power 2.4.5 Inverter Data 2.5 Location 2.6 Language Please read for detailed information the following chapters 2.1 to 2.6 2.1 Menu Bar If you click these links, you can enter System Overview, System Monitor, and History pages. Figure 7. Menu Bar 7
2.2 Basic Information of Device * Device Serial Number: serial number of the device * Capacity: maximal power of the device * Network: the connecting status of the device * Status: the status of the device Figure 8. Basic Information of Device 2.3 Basic Energy Statistics *Today's generation: today s energy generated by PV system. *Today's feed-in: today s feed-in energy to the grid *Today's consumption: today s energy consumption from grid *Total generation: total energy generated by PV system *Total feed-in: total feed-in energy to the grid *Total consumption: total energy consumption from grid Figure 9.Basic Energy Statistics 2.4 Real-time System Diagram It shows the current power consumption value of PV, Load, Battery, Feed-in and Grid. In addition, the detailed data of the battery and inverter is showed. Figure 10. Real-time System Diagram 8
2.4.1 PV Power It shows the current power of the PV system Figure 11. PV Power 2.4.2 Battery Data Click the picture you will see the detail information of the battery as follow. Figure 12. Battery Data *SOC: State of Charge *Status: Charge, Discharge, Standby *Bat Voltage: total voltage of the battery packs *Bat Current: current of the battery packs *Bat Power: total power of the battery packs *Max Cell Voltage: maximal voltage in all cells *Min Cell Voltage: minimal voltage in all cells *Max Cell Temperature: maximal temperature in all cells *Min Cell Temperature: minimal temperature in all cells *Max Voltage Module ID: ID of battery module that has maximal voltage *Min Voltage Module ID: ID of battery module that has minimal voltage *Max Temperature Module ID: ID of battery module that has maximal temperature *Min Temperature Module ID: ID of battery module that has minimal temperature Figure 13. Battery Detail Data 9
2.4.3 Grid Power Display the power of grid, including consumption and feed-in. Figure 14. Grid Power 2.4.4 Load Power Display the power of all loads, including the system loss.. Figure 15. Load Power 2.4.5 Inverter Data Click the picture you will see the detailed information of the inverter. Figure 16. Inverter Data 10
*PV1 Current: current of No.1 PV system *PV1 Voltage: voltage of No.1 PV system *PV2 Current: current of No.2 PV system *PV2 Voltage: voltage of No.2 PV system *R/S/T Phase Current: current of R/S/T phase * R/S/T Phase Voltage: voltage of R/S/T phase * R/S/T Phase Frequency: frequency of R/S/T phase *PV Power Now: current power of PV system *Temperature: temperature of the inverter *PV Today s Energy: today s energy generated by PV *PV Total Energy: total energy generated by PV *Today s Running: today s running of the inverter (minute) *Total Running: total running duration of the inverter (hour) Figure 17. Inverter Detail Data 11
2.5 Location Figure 18. Location On this page, you can set the place where your device is installed. 2.6 Language Click the link Language, you can switch 4 languages in Chinese, English, Japanese, German. Figure 19. Language 12
3 Online Monitoring 3.1 Power Diagram It shows the power value of PV, Load, Battery, Feed-in and Grid consumption. *When the battery power is positive number, the battery is in the state of charging, otherwise, discharging. Figure 20. Power Diagram 3.2 History Data 3.2.1 Statistical Diagram It shows the total energy of PV, Load, Battery, Feed-in and Grid consumption. *Click the icon, to display the energy of total battery charging & discharging. *In addition, when you click the button of Export CSV or Export PDF you can export data in the format of CSV or PDF. *Buttons Month, Year, Over Years is used to click for changing the date range of statistics. Figure 21. Statistical Diagram 3.2.2 Energy Diagram It shows the energy of PV, Load, Feed-in, Grid consumption, ESS Supply in the range of selected period. Figure 22. Energy Diagram 13
3.2.3 Efficiency Diagram It shows self-consumption (Load-Consumption efficiency). It displays how much PV generation supplied for the load of the total load consumption. Figure 23. Efficiency Diagram - Load-Consumption Efficiency It shows self-sufficiency (PV autarky efficiency). It displays how much PV energy generation used by the load and battery, etc. *Buttons Month, Year, Over Years is used to click for changing the date range of statistics. Figure 24. Efficiency Diagram - PV Autarky Efficiency Thank you for reading the Trinabess Online Monitoring Center User Manual. If you have any problems, please feel free to send an e-mail to TES_CService@trinagroup.com. 14
4 Register of Illustrations Figure 1. Login...4 Figure 2. Registration.. 4 Figure 3. Recovery of Password...5 Figure 4. Logout......5 Figure 5. Modify Password. 6 Figure 6. Online Overview.. 7 Figure 7. Menu Bar.. 7 Figure 8. Basic Information of Device.. 8 Figure 9.Basic Energy Statistics....8 Figure 10. Real-time System Diagram..8 Figure 11. PV Power....9 Figure 12. Battery Data...9 Figure 13. Battery Detail Data....9 Figure 14. Grid Power...10 Figure 15. Load Power. 10 Figure 16. Inverter Data... 10 Figure 17. Inverter Detail Data... 11 Figure 18. Location...12 Figure 19. Language. 12 Figure 20. Power Diagram... 13 Figure 21. Statistical Diagram. 13 Figure 22. Energy Diagram..13 Figure 23. Efficiency Diagram - Load-Consumption Efficiency..14 Figure 24. Efficiency Diagram - PV Autarky Efficiency....14 15