Siemens 017 SITRNS LPS00 Overview SITRNS LPS00 is a rotary paddle switch for point level and material detection in bulk solids. enefits Proven paddle switch technology for bulk solids High integrity mechanical seal Universal power supply options available Unique friction clutch mechanism prevents damage from falling material Rotatable enclosure for convenient wiring Optional paddles for use with low density materials Small paddle makes for simple installation through existing process connection High temperature model and optional extension kit available Optional fail-safe configuration detects loss of rotation unctional Safety (SIL ). evice suitable for use in accordance with I 61508 and I 61511 pplication The paddle switch technology detects full, empty, or demand conditions on materials such as grain, feed, cement, plastic granulate, and wood chips. The paddle switch can handle bulk densities as low as 15.06 g/l (0.9 lb/ft 3 ) with the optional rectangular vane or 100 g/l (6.5 lb/ft 3 ) with the standard measuring vane. low revolution geared motor with slip clutch drives a rotating measuring vane which senses the presence of material at the mounted level of the LPS00. s material comes into contact with the rotating paddle, rotation stops, which changes the microswitch state. When the paddle is no longer covered by material, rotation resumes and the relay reverts to its normal condition. The LPS00 has a rugged design for use in harsh conditions in the solids industry. The sensitivity of the paddle can be adjusted for varying material properties like buildup on the vane. The LPS00 comes in a variety of configurations including compact, extended and cable extension. It is equipped with a standard vane which is effective in most applications, but can be configured with a hinged or rectangular vane for increased sensitivity for light materials. Key pplications: bulk solids such as grain, feed, cement, plastic granulate, wood chips Technical specifications Mode of operation Measuring principle Input Measured variable Output Output signal larm output Pickup delay Sensitivity Rotating point level switch High and low and demand Microswitch 5 at 50 V, non-inductive Microswitch SPT contact at 30 V, non-inductive Standard (1 rpm model): approx. 1.3 seconds Optional process applications (5 rpm model): approx. 0.6 seconds djustable via reset force of spring or geometry of measuring vane Rated operating conditions Installation conditions Location Indoor/outdoor mbient conditions mbient temperature -5... +60 (-13... +10 ) Installation category III Pollution degree Medium conditions ulk solids Temperature - Standard -5... +80 (-13... +176 ) - Optional -5... +600 (-13... +1 11 ) Higher temperature version is available. onsult a local sales person for details. or more information, please visit http://www.automation.siemens.com/ aspa_app. Pressure (vessel) - Standard Max. 0.5 bar g (7.5 psi g) - Optional Max. 10 bar g (15 psi g) Minimum material density - Standard measuring vane an detect down to 100 g/l (6.5 lb/ft 3 ) - Optional measuring vane an detect down to 15 g/l (0.9 lb/ft 3 ) esign Material nclosure poxy coated aluminum Process connection, measuring Stainless steel or aluminum shaft and vane Process connection Thread NPT, SP, and flange options egree of protection IP65/Type /NM onduit entry x M0 x 1.5 or x ½" NPT Power supply Jumper selectable 115 V, ± 15 %, 50... 60 Hz, V or 30 V, ± 15 %, 50 Hz, 6 V, or 8 V, or V, or V, ± 15 %,.5 W Universal voltage (PT replay) V ± 15 % 50... 60 Hz,... 30 V, ± 10 %, max. 10 V ertificates and approvals S/M eneral Purpose S/M ust Ignition Proof TX II 1/ RM Iex Siemens I 01 Update 11/017 /101
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, compact 7ML575- Rotary paddle switch for level and material detection in bulk solids. ompact design for 77777-777 0 777 side or top mounted applications. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Process temperature Up to 80 (176 ) 1 Up to 150 (30 ) Up to 50 (8 ) 3 Up to 600 (1 11 ) 1)) Up to 80 (176 ) basic version aluminum 1)3) 5 Up to 80 (176 ) basic version stainless steel 1)) 6 Power supply 30 V, 1 rev/min. 30 V, 5 rev/min. 115 V, 1 rev/min. 115 V, 5 rev/min. 8 V, 1 rev/min. J V, 1 rev/min. K V, 1 rev/min. L V, 5 rev/min. N 8 V, 5 rev/min. Z J 1 V, 5 rev/min. Z J 1 Universal Voltage, 1 rev/min. Z J Universal Voltage, 1 rev/min., fail-safe Z J Universal Voltage, 5 rev/min. Z J Universal Voltage, 5 rev/min, fail-safe Z J Process connection Threaded 1¼" [(SPP), N ISO 8-1] 1" [(SPP), N ISO 8-1] 1½" [(SPP), N ISO 8-1] 1" NPT [(Taper), NSI/SM 1.0.1] 1¼" NPT [(Taper), NSI/SM 1.0.1] 1½" NPT [(Taper), NSI/SM 1.0.1] langed N 3 PN 6, N 109-1 5) N 100 PN 6, N 109-1 5) H N 100 PN 16, N 109-1 J " SM 150 lb 16.5 K 3" SM 150 lb 16.5 L " SM 150 lb 16.5 M " Tri-clamp (N 50) ISO 85 6) N rticle No. Ord. code SITRNS LPS00, compact 7ML575- Rotary paddle switch for level and material detection in bulk solids. ompact design for side or top mounted applications. 77777-777 0 777 Process pressure Up to 0.5 bar (7.5 psi) 1 Up to 5 bar (7.5 psi) Up to 10 bar (15 psi) 3 Process connection material luminum 7) 1 Stainless steel, threads 303 (1.305), flanges 31 (1.51), Tri-clamp 30 (1.301) Stainless steel 316L (1.0) 8) 3 xtension length 100 mm (3.9 inch) 9) 1 150 mm (5.91 inch) 00 mm (7.87 inch) 3 50 mm (9.8 inch) 300 mm (11.81 inch) 5 Measuring vane oot shaped, 35 x 106 mm (1.38 x.17 inch) 10) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) 10)11) oot shaped, 8 x 98 mm (1.10 x 3.86 inch) Rectangular, 50 x 150 mm (1.97 x 5.91 inch) 1) Rectangular, 50 x 50 mm (1.97 x 9.8 inch) 1) Rectangular, 98 x 150 mm (3.86 x 5.91 inch) 11)1) Rectangular, 98 x 50 mm (3.86 x 9.8 inch) 11)1) Rectangular, 50 x 98 mm (1.97 x 3.86 inch) 1) H pprovals S/M ust Ignition Proof, RM TX II 1/, RM S/M eneral Purpose, RM,, RM I x ta/tb III x ta/tb III a/b /10 Siemens I 01 Update 11/017
Siemens 017 SITRNS LPS00 1 Order code هى مء مو ء Please add "-Z" to rticle No. and specify Order code(s). Heating of enclosure 13)1) 35 Signal bulb inserted in M0 cable gland 13) 0 ood grade materials (in contact with process), K01 according to 1935/00/, with conform shaft sealing 15) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Y1 Measuring-point number/identification (max. 7 characters); specify in plain text unctional Safety (SIL ). evice suitable for use in 0 accordance with I 61508 and I 61511. 17)18) ى ك ة ه ى ف م د rticle No. Multi-language 5310883 Note: The Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation فذ م ف س Replacement vane, boot shape, 35 x 106 mm 7ML1830-1KH (1.38 x.17 inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) 7ML1830-1KJ ى ى م م لىهىز (Includes spring coupling, rigid tube extension, and required pins) xtension: 500, 00, 300 mm (19.7, 15.8, 7ML5711-0 11.8 inch) 16) xtension: 1 000, 900, 800, 700, 600 mm 7ML5711-1 (39., 35., 31.5, 7.6, 3.6 inch) 16) xtension: 1 500, 1 00, 1 300, 1 00, 1 100 mm 7ML5711- (59.1, 55.1, 51., 7., 3.3 inch) 16) Rope extension kit, m (6.56 ft) 7ML1830-1KK ك م م قف ىف ء or details see page 10/11 in the appendix. SITRNS LPS00, compact for up to 80 (176 ), aluminum, with power supply, process connection, process pressure 1, process connection material 1, extension length, measuring vane, and approval SITRNS LPS00, compact for up to 80 (176 ), stainless steel, with power supply Z (J), process connection, process pressure 1, process connection material, extension length, measuring vane, and approval SITRNS LPS00, compact for up to 80 (176 ), stainless steel, with power supply Z (J), process connection, process pressure 1, process connection material, extension length, measuring vane, and approval 1) vailable with approval options and only, up to 0.5 bar. ) Not available with process connections,,,, and. rticle No. 7ML575-511-0 7ML575-6Z1-0 J 7ML575-6Z1-0 J 3) Only available with the following configurations 7ML575-511-0 or 7ML575-511-0. ) Only available with the following configurations 7ML575-6Z1-0 J or 7ML575-6Z1-0 J. 5) vailable with process pressure options 1 and only. 6) vailable with process temperature option 1 only. 7) vailable with process connection options... only, process pressure option 1 and process temperature options 1 and 5 only. 8) vailable with process connection options,, H N and Measuring vane options and. 9) vailable with measuring vane options,,,, H only. 10) dd 16 mm (0.63 inch) to extension length. 11) vailable with extension lengths, 3,, 5. 1) vailable with process connection options H M only. 13) vailable with approval option only. 1) vailable with power supply options,,,, J, K, L, N, J1, J1, J1, J, J only. 15) vailable up to 50 (8 ). This option does not automatically implement a food conform design. 16) Pendulum shaft 500 mm/1 000 mm/1 500 mm should be selected with 150 mm standard length and vane (35 x 106) to get to the desired lengths. 17) vailable with Power supply options J and J only. 18) vailable with pproval options,,,, and only. pprovals and with M only. Siemens I 01 Update 11/017 /103
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, shaft protected 7ML576- Rotary paddle switch for level and material detection in bulk solids; ideal for heavy, 77 7 77-7777 777 sticky, or high impact applications. esigned with added protection tube for enhanced shaft protection and protection against buildup on shaft (sidewall buildup). lick on the rticle No. for the online configuration in the PI Life ycle Portal. Process temperature Up to 80 (176 ) 1 Up to 150 (30 ) Up to 50 (8 ) 3 Up to 600 (1 11 ) 1)) Up to 80 (176 ) basic version 3) 5 Power supply 30 V, 1 rev/min. 30 V, 5 rev/min. 115 V, 1 rev/min. 115 V, 5 rev/min. 8 V, 1 rev/min. J V, 1 rev/min. K V, 1 rev/min. L V, 5 rev/min. N 8 V, 5 rev/min. Z J 1 V, 5 rev/min. Z J 1 Universal Voltage, 1 rev/min. Z J Universal Voltage, 1 rev/min., fail-safe Z J Universal Voltage, 5 rev/min. Z J Universal Voltage, 5 rev/min., fail-safe Z J Process connection Threaded 1¼" [(SPP), N ISO 8-1] 1½" [(SPP), N ISO 8-1] 1¼" NPT [(Taper), NSI/SM 1.0.1] 1½" NPT [(Taper), NSI/SM 1.0.1] langed N 3 PN 6, N 109-1 ) N 100 PN 6, N 109-1 ) N 100 PN 16, N 109-1 " SM 150 lb 16.5 H 3" SM 150 lb 16.5 J " SM 150 lb 16.5 K " Tri-clamp (N 50) ISO 85 5) L rticle No. Ord. code SITRNS LPS00, shaft protected 7ML576- Rotary paddle switch for level and material detection in bulk solids; ideal for heavy, 77 7 77-7777 777 sticky, or high impact applications. esigned with added protection tube for enhanced shaft protection and protection against buildup on shaft (sidewall buildup). Process pressure Up to 0.5 bar (7.5 psi) 1 Up to 5 bar (7.5 psi) Up to 10 bar (15 psi) 3 Process connection material luminum 6) 1 Stainless steel, threads 303 (1.305), flanges 31 (1.51), Tri-clamp 30 (1.301) 18) Stainless steel 316L (1.0) 7) 3 xtension length 150 mm (5.91 inch) 8) 1 00 mm (7.87 inch) 50 mm (9.8 inch) 3 300 mm (11.81 inch) xtension material (protection tube) luminum 9) Stainless steel 303 (1.305) Stainless steel 316L (1.0) 10) Measuring vane oot shaped, 35 x 106 mm (1.38x.17inch) 11) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) 11)1) Rectangular, 50 x 150 mm (1.97x5.91inch) 13) Rectangular, 50 x 50 mm (1.97x9.8inch) 13) Rectangular, 98 x 150 mm (3.86x5.91inch) 1)13) Rectangular, 98 x 50 mm (3.86x9.8inch) 1)13) Rectangular, 50 x 98 mm H (1.97 x 3.86 inch) 13) pprovals S/M ust Ignition Proof, RM 1 TX II 1/, RM S/M eneral Purpose, RM, 3, RM I x ta/tb III 5 x ta/tb III a/b 6 /10 Siemens I 01 Update 11/017
Siemens 017 SITRNS LPS00 هى مء مو ء Please add "-Z" to rticle No. and specify Order code(s). Heating of enclosure 1)15) Signal bulb inserted in M0 cable gland 1) ood grade materials (in contact with process), according to 1935/00/, with conform shaft sealing 16) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 7 characters); specify in plain text unctional Safety (SIL ). evice suitable for use in accordance with I 61508 and I 61511. 17)19) ى ك ة ه ى ف م د Multi-language Note: The Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation فذ م ف س Replacement vane, boot shape, 35 x 106 mm (1.38 x.17 inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) ك م م قف ىف ء or details see page 10/11 in the appendix. SITRNS LPS00, extended for up to 80 (176 ), power supply Z (J), process connection, process pressure 1, process connection material, extension length, extension material, measuring vane, and approval SITRNS LPS00, extended for up to 80 (176 ), power supply Z (J), process connection, process pressure 1, process connection material, extension length, extension material, measuring vane, and approval 1 Order code 35 0 K01 Y1 0 1) vailable with approval options 3 and only and up to max 0.5 bar. ) Not available with process connection options,,. 3) Only available with the following configurations 7ML576-5Z1- J or 7ML576-5Z1-1 J. ) vailable with process pressure options 1 and only. 5) vailable with process temperature option 1 only. 6) vailable with process connection options... only, available with process pressure option 1 only, and process temperature option 1 only. 7) xtension and vane will also change to 316L, only for process connection options,, L and vane. 8) vailable with measuring vane options,,, H only. 9) vailable with process pressure option 1 and process temperature option 1 only. 10) vailable with process connection options,, L and vane. 11) dd 16 mm (0.63 inch) to extension length. 1) vailable with extension length options only. 13) vailable with process connection options,, H, J, K only. 1) vailable with approval option only. 15) vailable with power supply options,,,, J, K, L, N, J1, J1, J1, J, J only. 16) vailable up to 50 (8 ). This option does not automatically implement a food conform design. 17) vailable with Power supply options J and J only. 18) vailable with xtension material Stainless steel, threads 303 option only. 19) vailable with pproval options 1,, 3,, and 5 only. pprovals 1 and 3 with M only. rticle No. 5310883 7ML1830-1KH 7ML1830-1KJ 7ML576-5Z1- J 7ML576-5Z1-1 J Siemens I 01 Update 11/017 /105
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, cable extension 7ML577- Rotary paddle switch for level and material detection in bulk solids. 7 7 7 7 7-7 7 7 0 7 7 7 able extension for increased length in top-mounted applications lick on the rticle No. for the online configuration in the PI Life ycle Portal. Process temperature Up to 80 (176 ) 1 Up to 150 (30 ) Up to 50 (8 ) 3 Up to 600 (1 11 ) 1)) Up to 80 (176 ) basic version 3) 5 Power supply 30 V, 1 rev/min. 30 V, 5 rev/min. 115 V, 1 rev/min. 115 V, 5 rev/min. 8 V, 1 rev/min. J V, 1 rev/min. K V, 1 rev/min. L V, 5 rev/min. N 8 V, 5 rev/min. Z J 1 V, 5 rev/min. Z J 1 Universal Voltage, 1 rev/min. Z J Universal Voltage, 1 rev/min., fail-safe Z J Universal Voltage, 5 rev/min. Z J Universal Voltage, 5 rev/min., fail-safe Z J Process connection Threaded 1¼" [(SPP), N ISO 8-1] 1½" [(SPP), N ISO 8-1] 1¼" NPT [(Taper), NSI/SM 1.0.1] 1½" NPT [(Taper), NSI/SM 1.0.1] langed N 3 PN 6, N 109-1 ) N 100 PN 6, N 109-1 ) N 100 PN 16, N 109-1 " SM 150 lb 16.5 H 3" SM 150 lb 16.5 J " SM 150 lb 16.5 K rticle No. Ord. code SITRNS LPS00, cable extension 7ML577- Rotary paddle switch for level and material detection in bulk solids. 7 7 7 7 7-7 7 7 0 7 7 7 able extension for increased length in top-mounted applications Process pressure Up to 0.5 bar (7.5 psi) 1 Up to 5 bar (7.5 psi) Up to 10 bar (15 psi) 3 Process connection material luminum 5) 1 Stainless steel, threads 303 (1.305), flanges 31 (1.51) able extension length Standard cable length, 000 mm 0 (78.7 inch) dd Order code Y01 and plain text: "Insertion length... mm" 500... 1 000 mm (19.69... 39.37 inch) 1 able length 1 001... 000 mm (39.1... 78.7 inch) able length 001... 3 000 mm 3 (78.78... 118.11 inch) able length 3 001... 000 mm (118.15... 157.8 inch) able length 001... 5 000 mm 5 (157.5... 196.85 inch) able length 5 001... 6 000 mm 6 (196.89... 36. inch) able length 6 001... 7 000 mm 7 (36.6... 75.59 inch) able length 7 001... 10 000 mm 8 (75.63... 393.70 inch) Without extension 1) 9 N 1 Measuring vane oot shaped, 35 x 106 mm (1.38x.17inch) 6) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) 6) oot shaped, 8 x 98 mm (1.10 x 3.86 inch) 7) Rectangular, 50 x 150 mm (1.97 x 5.91 inch) 7) Rectangular, 50 x 50 mm (1.97 x 9.8 inch) 7) Rectangular, 98 x 150 mm (3.86 x 5.91 inch) 7) Rectangular, 50 x 98 mm (1.97 x 3.86 inch) 7) pprovals S/M ust Ignition Proof, RM TX II 1/, RM S/M eneral Purpose, RM,, RM I x ta/tb III x ta/tb III a/b /106 Siemens I 01 Update 11/017
Siemens 017 SITRNS LPS00 هى مء مو ء Order code Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 10 000 mm (393.70 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 7 characters); specify in plain text Reinforced cable (max. 8 kn pulling force) 8) Heating of enclosure 9)10) Signal bulb inserted in M0 cable gland 9) ood grade materials (in contact with process), according to 1935/00/, with conform shaft sealing 11) unctional Safety (SIL ). evice suitable for use in accordance with I 61508 and I 61511. 13)1) ى ك ة ه ى ف م د Multi-language Note: The Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation فذ م ف س Replacement vane, boot shape, 35 x 106 mm (1.38 x.17 inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) ك م م قف ىف ء or details see page 10/11 in the appendix. SITRNS LPS00, cable extension for up to 80 (176 ), power supply Z (J), process connection, process pressure 1, process connection material, extension length 0, measuring vane, and approval SITRNS LPS00, cable extension for up to 80 (176 ), power supply Z (J), process connection, process pressure 1, process connection material, extension length 0, measuring vane, and approval Y01 Y1 P01 35 0 K01 0 rticle No. 5310883 7ML1830-1KH 7ML1830-1KJ 7ML577-5Z1-00 J 7ML577-5Z1-00 J 1) vailable with approval options and up to max. 0.5 bar ) Not available with process connections,, 3) Only available with the following configurations 7ML577-5Z1-00 J or 7ML577-5Z1-00 J ) vailable with process pressure options 1 and only 5) vailable with process connections... only, process pressure option 1 only and process temperature options 1 and 5 only 6) dd 16 mm (0.63 inch) to extension length 7) vailable with process connections K only 8) vailable only for process temperature up to 80 (176 ) and process connection material 9) vailable with approval option 10) vailable with power supply options,,,, J, K, L, N, J1, J1, J1, J, J only 11) vailable up to 50 (8 ). This option does not automatically implement a food conform design (food conform gaps and radius) 1) Not available with P01 and available with pproval, mounting kit for rope extension included 13) vailable with Power supply options J and J only 1) vailable with pproval options,,,, and only. pprovals and with M only. Siemens I 01 Update 11/017 /107
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, angled extension 7ML578- Rotary paddle switch with robust design for level and material detection in bulk solids; 777 77-777 0 777 ideal for heavy or sticky applications. ngled extension is designed to avoid falling material and rotates horizontally in side mount applications to continue working even with heavy buildup. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Process temperature Up to 80 (176 ) 1 Up to 150 (30 ) Up to 50 (8 ) 3 Power supply 30 V, 1 rev/min. 30 V, 5 rev/min. 115 V, 1 rev/min. 115 V, 5 rev/min. 8 V, 1 rev/min. J V, 1 rev/min. K V, 1 rev/min. L V, 5 rev/min. N 8 V, 5 rev/min. Z J 1 V, 5 rev/min. Z J 1 Universal Voltage, 1 rev/min. Z J Universal Voltage, 1 rev/min., fail-safe Z J Universal Voltage, 5 rev/min. Z J Universal Voltage, 5 rev/min., fail-safe Z J Process connection langed N 100 PN 6, N 109-1 1) N 100 PN 16, N 109-1 " SM 150 lb 16.5 Process pressure Up to 0.5 bar (7.5 psi) 1 Up to 5 bar (7.5 psi) Up to 10 bar (15 psi) 3 Process connection material Stainless steel 303/31 (1.305/1.51) 1 xtension length 15 mm (.9 inch) 1 150 mm (5.91 inch) 00 mm (7.87 inch) 3 50 mm (9.8 inch) 300 mm (11.81 inch) 5 Measuring vane Rectangular vane, 50 x 98 mm (1.97 x 3.86 inch) Rectangular vane, 50 x 150 mm (1.97x5.91inch) Rectangular vane, 50 x 50 mm (1.97x9.8inch) Rectangular vane, 98 x 150 mm (3.86x5.91inch) Rectangular vane, 98 x 50 mm (3.86x9.8inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) pprovals S/M ust Ignition Proof, RM TX II 1/, RM S/M eneral Purpose, RM,, RM I x ta/tb III x ta/tb III a/b هى مء مو ء Please add "-Z" to rticle No. and specify Order code(s). Heating of enclosure )3) Signal bulb inserted in M0 cable gland ) ood grade materials (in contact with process), according to 1935/00/, with conform shaft sealing ) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 7 characters); specify in plain text unctional Safety (SIL ). evice suitable for use in accordance with I 61508 and I 61511. 5)6) ى ك ة ه ى ف م د Multi-language Note: The Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation فذ م ف س Replacement vane, boot shape, 35 x 106 mm (1.38 x.17 inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) Order code 35 0 K01 Y1 0 rticle No. 5310883 7ML1830-1KH 7ML1830-1KJ 1) vailable with process pressure options 1 and only. ) vailable with approval option only. 3) vailable with power supply options,,,, J, K, L, N, J1, J1, J1, J, J only. ) This option does not automatically implement a food conform design. 5) vailable with Power supply options J and J only. 6) vailable with pproval options,,,, and only. pprovals and with M only. /108 Siemens I 01 Update 11/017
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, rigid extension 7ML5730- Rotary paddle switch for top mount point level and material detection in bulk solids 7 7 7 7 7-7 7 7 7 7 7 7 lick on the rticle No. for the online configuration in the PI Life ycle Portal. Process temperature Up to 80 (176 ) 1 Up to 150 (30 ) Up to 50 (8 ) 3 Up to 600 (1 11 ) 1)) Power supply 30 V, 1 rev/min. 30 V, 5 rev/min. 115 V, 1 rev/min. 115 V, 5 rev/min. 8 V, 1 rev/min. J V, 1 rev/min. K V, 1 rev/min. L V, 5 rev/min. N 8 V, 5 rev/min. Z J 1 V, 5 rev/min. Z J 1 Universal Voltage, 1 rev/min. Z J Universal Voltage, 1 rev/min., fail-safe Z J Universal Voltage, 5 rev/min. Z J Universal Voltage, 5 rev/min., fail-safe Z J Process connection Threaded 1¼" [(SPP), N ISO 8-1] 1½" [(SPP), N ISO 8-1] 1¼" NPT [(Taper), NSI/SM 1.0.1] 1½" NPT [(Taper), NSI/SM 1.0.1] langed N 3 PN 6, N 109-1 3) N 100 PN 6, N 109-1 3) N 100 PN 16, N 109-1 " SM 150 lb 16.5 H 3" SM 150 lb 16.5 J " SM 150 lb 16.5 K " Tri-clamp (N 50) ISO 85 ) L rticle No. Ord. code SITRNS LPS00, rigid extension 7ML5730- Rotary paddle switch for top mount point level and material detection in bulk solids 7 7 7 7 7-7 7 7 7 7 7 7 Process pressure Up to 0.5 bar (7.5 psi) 1 Up to 5 bar (7.5 psi) Up to 10 bar (15 psi) 3 Process connection material luminum 5) 1 Stainless steel, threads 303 (1.305), flanges 31 (1.51), Tri-clamp 30 (1.301) Stainless steel 316L (1.0) 6) 3 xtension material (protection tube) luminum 7)8) 0 Stainless steel 303 (1.305) 9) 1 Stainless steel 316L (1.0) 10)11)) xtension length luminum 50... 500 mm (9.8... 19.69 inch) 501... 750 mm (19.7... 9.53 inch) 751... 1 000 mm (9.57... 39.37 inch) 1 001... 1 50 mm (39.1....1 inch) 1 51... 1 500 mm (9.5... 59.06 inch) 1 501... 1 750 mm (59.09... 68.90 inch) 1 751... 000 mm (68.9... 78.7 inch) 001... 50 mm (78.78... 88.58 inch) H 51... 500 mm (88.6... 98.3 inch) J 501... 750 mm (98.6... 108.7 inch) K 751... 3 000 mm (108.31... 118.11 inch) L 3 001... 3 50 mm (118.15... 17.95 inch) M 3 51... 3 500 mm (17.99... 137.80 inch) N 3 501... 3 750 mm (137.83... 17.6 inch) P 3 751... 000 mm (17.67... 157.8 inch) Q Stainless steel 303 (1.305) 50... 500 mm (9.8... 19.69 inch) R 501... 750 mm (19.7... 9.53 inch) S 751... 1 000 mm (9.57... 39.37 inch) T 1 001... 1 500 mm (39.1... 59.05 inch) U 1 501... 000 mm (59.09... 78.7 inch) V 001... 500 mm (78.78... 98. inch) W 501... 3 000 mm (98.6... 118.11 inch) X 3 001... 000 mm (118.15... 157.8 inch) Y Stainless steel 316L (1.0) 50... 500 mm (9.8... 19.69 inch) Z P 1 501... 750 mm (19.7... 9.53 inch) Z P 1 751... 1 000 mm (9.57... 39.37 inch) Z P 1 1 001... 1 500 mm (39.1... 59.05 inch) Z P 1 1 501... 000 mm (59.09... 78.7 inch) Z P 1 001... 500 mm (78.78... 98. inch) Z P 1 501... 3 000 mm (98.6... 118.11 inch) Z P 1 3 001... 000 mm (118.5... 157.8 inch) Z P 1 H Siemens I 01 Update 11/017 /109
Siemens 017 SITRNS LPS00 rticle No. Ord. code SITRNS LPS00, rigid extension 7ML5730- Rotary paddle switch for top mount point level and material detection in bulk solids 7 7 7 7 7-7 7 7 7 7 7 7 Measuring vane oot shaped, 35 x 106 mm (1.3 x.17 inch) 1) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) 1) Rectangular, 50 x 150 mm (1.97 x 5.91 inch) 13) Rectangular, 50 x 50 mm (1.97 x 9.8 inch) 13) Rectangular, 98 x 150 mm (3.86 x 5.91 inch) 13) Rectangular, 98 x 50 mm (3.86 x 9.8 inch) 13) Rectangular, 50 x 98 mm (1.97 x 3.86 inch) 13) pprovals S/M ust Ignition Proof, RM 1 TX II 1/, RM S/M eneral Purpose, RM, 3, RM I x ta/tb III 5 x ta/tb III a/b 6 1) vailable with approval options 3 and, up to max 0.5 bar ) Not available with process connections,,. 3) vailable with process pressure options 1 and only. ) vailable with process temperature 1 only. 5) vailable with process connections... only, with process pressure option 1 and process temperature option 1 only. 6) vailable with process connection options,, L and measuring vane option. 7) vailable with process pressure 1 and process temperature 1 only. 8) vailable with extension length options Q only. 9) vailable with extension length options R Y only. 10) vailable with process connection options,, L and measuring vane, process connection material 3. vailable only with extension length options P1 P1H only. 11) Only available with seal at tube end options P06 P09. 1) dd 16 mm (0.63 inch) to extension length. 13) vailable with process connections,, H, J, K only. 1) vailable with approval option only. 15) vailable with power supply options,,,, J, K, L, N, J1, J1, J1, J, J only. 16) vailable when ordered with ingress protection seal options P06 P09 only. 17) vailable up to 50 (8 ). This option does not automatically implement a food conform design. 18) vailable with process pressure option 1 only. هى مء مو ء Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 000 mm (157.8 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 7 characters); specify in plain text unctional Safety (SIL ). evice suitable for use in accordance with I 61508 and I 61511. 0)1) Heating of enclosure 1)15) Signal bulb inserted in M0 cable gland 1) ood grade materials (in contact with process), according to 1935/00/, with conform shaft sealing 16)17) Optional end of shaft seal for stability and ingress protection Max. temperature 80 (176 ) Max. temperature 150 (30 ) Max. temperature 50 (8 ) Max. temperature 600 (1 11 ) Sliding sleeve (standard, max. pressure 0.5 bar) 1)18) Sliding sleeve (pressure tight, for over-pressure application starting from 1 bar max., dependent on pressure option ordered) 19) ى ك ة ه ى ف م د Multi-language Note: The Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation فذ م ف س Replacement vane, boot shape, 35 x 106 mm (1.38 x.17 inch) Hinged vane, 65 x 00 mm (.56 x 7.87 inch) Order code Y01 Y1 0 35 0 K01 P06 P07 P08 P09 P1 P13 5310883 7ML1830-1KH 7ML1830-1KJ 19) vailable up to 50 (8 ). 0) vailable with Power supply options J and J only. 1) vailable with pproval options 1,, 3,, and 5 only. pprovals 1 and 3 with M only. ) Internal probe construction is 1.305, add seal option P09 to prevent ingress. /110 Siemens I 01 Update 11/017
Siemens 017 SITRNS LPS00 imensional drawings Standard model: compact version onduit connection M0 or ½" NPT mbient temperature -5... +60 (-13... +10 ) Zone 1 (at. ) Zone 0 (at. 1) Process temperature -5... +80 (-13... +176 ) Measuring vanes 35 (1.38) Thread length SP: 0.5 (0.81) NPT: (0.9) Standard 106 (.17) Rectangular 60 (.36) Hinged old together to lead into mounting hole 10 (.7) Measuring vane Rectangular vane options 50 (1.97) 50 (1.97) 50 (1.97) 98 (3.86) 98 (3.86) 60 (.36) 75 (.95) 13 (.8) Optional process flange 1. or 35 x 106 mm boot shaped and 98 x 00 mm hinged measuring vanes, add 16 mm to extension length.. or use with all approval options except S class II. See manual for more details. Notes or heavy material, only top mounting of paddle switch is recommended. ompact LPS00 is recommended for side mounting on bins for low or intermediate material levels. 1) L 98 (3.86) 150 (5.90) 50 (9.8) 150 (5.90) 50 (9.8) Min. 37 (1.6) High temperature model: compact version Shaft protected option Vane oot shaped 35 x 106 mm oot shaped 8 x 98 mm Rectangular 50 x 98 mm Rectangular 50 x 150 mm Rectangular 50 x 50 mm Rectangular 98 x 150 mm Rectangular 98 x 50 mm Hinged 98 x 00 mm Thread length SP: 0.5 (0.81) NPT: (0.9) mbient temperature -5... +60 (-13... +10 ) Zone 1 (at. ) Zone 0 (at. 1) Process temperature ) -5... +600 (-13... +8 ) 1) L 00 (7.87) ngle option 98 (3.86) 15... 300 (.9... 8.6) ompletely covered with material 80 g/l (5.0 lb/ft³) 30 g/l (1.9 lb/ft³) 30 g/l (1.9 lb/ft³) 0 g/l (1. lb/ft³) 70 g/l (. lb/ft³) (7.5 lb/ft³) 50 g/l (3.1 lb/ft³) 50 g/l (3.1 lb/ft³) 30 g/l (1.9 lb/ft³) Rope fixing Spring adjustment Light entral (factory setting) 00 g/l 300 g/l (1.5 lb/ft³) (18.7 lb/ft³) 300 g/l (18.7 lb/ft³) 300 g/l (18.7 lb/ft³) 500 g/l (31. lb/ft³) 500 g/l (31. lb/ft³) 10 g/l 100 g/l (6. lb/ft³) 1) L Process temperature L= Length Rope option 000 (78.7) standard; an be shortened by the customer; total length available 10 000 (393.7) overed up to 10 cm (3.93 inch) with material Spring adjustment Light entral (factory setting) 100 g/l 150 g/l (6. lb/ft³) (9. lb/ft³) 150 g/l 150 g/l (9. lb/ft³) (9. lb/ft³) 150 g/l 50 g/l (9. lb/ft³) (15.6 lb/ft³) 0 g/l 60 g/l (.5 lb/ft³) (3.7 lb/ft³) 15 g/l (0.9 lb/ft³) 15 g/l (0.9 lb/ft³) 15 g/l (0.9 lb/ft³) 35 g/l (. lb/ft³) 150/50 (30/8 º) 600 (1 11 º) 100 (3.9) 150 (5.91) 00 (7.87) 50 (9.8) 300 (11.81) 00 (7.87) 00 (15.7) 5 g/l (1.6 lb/ft³) 5 g/l (1.6 lb/ft³) 15 g/l (0.9 lb/ft³) 50 g/l (3.1 lb/ft³) SITRNS LPS00, dimensions in mm (inch) Siemens I 01 Update 11/017 /111
3 1 6 0 0 10 S 3 S 0 60 6 0 30 10 Siemens 017 SITRNS LPS00 Schematics or version Max. mm (W1) 7 6 5 1 Universal voltage (PT relay)* Max. mm (W1) 8 9 10 7 6 5 1 * See manual for universal voltage with SIL. ** With option ail safe alarm (rotation control). ontact open when de-energised. ail safe alarm switching and timing behaviour: If the vane is not covered, the rotating vane shaft will send pulses at 0 second intervals. In case of fault, the pulses are missed. fter 30 seconds, the alarm relay will open. L N P Signal output + - Power Supply Power supply: Signal output PT Signal output: delay larm output ** L N P + - Power Supply version: V or 8 V or 115 V or 30 V 50/60 Hz max. V ll voltages ± 10 % 1) Supply voltage as selected. xternal fuse: max 10, fast or slow, H, 50 V version: V ± 15 % 1) max..5 W xternal fuse: not required 1) Including ±10% of N 61010 Signal output: Micro switch, SPT contact max. 50 V, 5, non inductive max. 30 V,, non inductive xternal fuse: max 10, fast or slow, H, 50 V Sensor covered -> free actory setting = 3 sec 3 1 6 10 0 60 S 3 0 0 0 S Sensor covered -> covered actory setting = 1 sec 6 30 10 SITRNS LPS00 connections /11 Siemens I 01 Update 11/017