Rotary Cam Switches. Rotary Cam Switches

Rotary Cam es Series... 2 Hande Assembies... 8 Accessories... 12 Circuit Diagrams, Technica Information & Dimensions (Onine)... 13 Series R-Line Rotary Cam es... 24 Handes and Accessories... 27 Circuit Diagrams, Technica Information & Dimensions (Onine)... 30 Rotary Cam es 1

Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro and oad appications up to 25 amps. The ine is moduar and has many convenience and safety features. A we thought out ordering system provides many standard and nonstandard configurations, that are many times avaiabe off the shef. Any switch configuration Two frame sizes provide contro and oad switching up to 25 amps. Both frame sizes are avaiabe in pane mount and base mount for tota fexibiity. A wide range of switching configurations are offered, as isted beow. For any appication L2 contro and oad switches are UL isted, CSA approved and compy with the most important internationa standards for use as: Contro switches - for process contro, making and breaking circuits and as instrument seector switches. Motor switches - as ON/OFF and reversing switches. Muti-position oad switches - for the step contro of oads such as heaters and furnaces. Motor oad disconnect switches - for safey isoating circuits during repair and maintenance. Emergency OFF switches - for isoating circuits in case of danger or emergency situations. Can be equipped for ocking in the OFF position. Safety and quaity The L2 s sturdy design incorporates a positive switching action with a ceary designed switching point. bodies are touch-safe (IP20) and manufactured from sef-extinguishing materias corresponding to Cass UL 94 V0. A contro knobs and shafts are spray proof and dust proof to IP65. Moduar and fexibe The same switch hande assembies and shaft extension systems are used for both our L2 contro switches and L7 disconnect switches. This reduces inventory, simpifies stocking and aows you to put together the idea switch for your appication quicky and easiy. Simpe assemby and fast instaation Shaft extensions and door interocks snap-on quicky without toos, saving time during assemby. Captive terminas are shipped open and are totay accessibe regardess of whether the switch is base mounted or pane mounted. Screwdriver guides and cear termina markings reduce wiring mistakes and speed instaation. In addition, most switch hande assembies are avaiabe with either screw fixing or the centra nut mounting system for tota fexibiity. To earn the basic differences between contro, oad and fusibe disconnect switches and how to appy them, see our white paper Tech-LMSD in the onine ibrary. 2

Rotary Cam es Series L2 How to order L2 contro and oad switches A compete L2 switch is ordered with just two cataog numbers. The first number specifies the switch body and the second specifies the switch hande assemby. A L2 switch bodies come standard with a shaft and mounting screws for the switch hande assemby. Accessories such as shaft extensions and encosures are ordered separatey. First determine the switch body you need from pages 4 through 7. Then turn to page 8 to choose a switch hande assemby. If necessary, turn to page 10 and 11 to determine the type and ength of shaft extension you require. Hande Assembies - page 8 Body Assembies - pages 4 through 7 A comprehensive famiy of switches The L2 ine is part of an entire famiy of contro and oad switches avaiabe from Sprecher + Schuh. For speciaized switching requirements or arge ampere appications up to 40A (@600V), our R-Line Rotary Cam es offer a broad seection and rugged quaity. See the next chapter in this section entited R-Line Rotary Cam es (24) for ordering information. Our moduar L7 disconnect switches are rated to 100 amps for motor, oads and disconnect switching. They share many of the same components with the L2 ine. A compete description and ordering information can be found in Section L of this cataog. Rounding out our seection of manmachine interfaces, Sprecher + Schuh aso offers a broad seection of 22mm piot devices. See Section H in this cataog for ordering information. L7 Line R-Line Discount Schedue B7 3

Rotary Cam es Series LE2, Pane Mount Body Description Function Ange 90 90 45 60 Poes/ Wafers Body Cataog Number Pane Mount 12 Amp Price 16 Amp Price 20 Amp Price 25 Amp Price ON - OFF 1 / 1 LE2-12-1751 30.07 LE2-16-1751 34.22 LE2-20-1751 40.22 LE2-25-1751 48.81 2 / 1 LE2-12-1752 36.07 LE2-16-1752 40.76 LE2-20-1752 48.05 LE2-25-1752 58.29 3 / 2 LE2-12-1753 48.26 LE2-16-1753 54.26 LE2-20-1753 63.75 LE2-25-1753 75.84 4 / 2 LE2-12-1754 54.26 LE2-16-1754 60.91 LE2-20-1754 71.70 LE2-25-1754 85.201 5 / 3 LE2-12-1755 66.25 LE2-16-1755 74.42 LE2-20-1755 87.50 LE2-25-1755 102.75 6 / 3 LE2-12-1756 72.24 LE2-16-1756 80.96 LE2-20-1756 95.34 LE2-25-1756 112.23 1 / 1 LE2-12-1781 29.39 LE2-16-1781 30.57 LE2-20-1781 41.62 LE2-25-1781 48.05 2 / 1 LE2-12-1782 36.07 LE2-16-1782 42.39 LE2-20-1782 48.56 LE2-25-1782 58.68 3 / 2 LE2-12-1783 47.23 LE2-16-1783 56.34 LE2-20-1783 66.25 LE2-25-1783 75.69 4 / 2 LE2-12-1784 54.26 LE2-16-1784 63.20 LE2-20-1784 72.20 LE2-25-1784 85.05 Doube Throw 1 / 1 LE2-12-2251 34.76 LE2-16-2251 42.39 LE2-20-2251 49.59 LE2-25-2251 60.58 2 / 2 LE2-12-2252 52.65 LE2-16-2252 63.20 LE2-20-2252 73.72 LE2-25-2252 88.58 3 / 3 LE2-12-2253 72.24 LE2-16-2253 85.12 LE2-20-2253 99.05 LE2-25-2253 114.97 4 / 4 LE2-12-2254 90.44 LE2-16-2254 107.41 LE2-20-2254 119.36 LE2-25-2254 144.59 5 / 5 LE2-12-2255 108.20 LE2-16-2255 125.85 LE2-20-2255 156.22 LE2-25-2255 179.03 1 / 1 LE2-12-2501 36.07 LE2-16-2501 41.55 LE2-20-2501 49.90 LE2-25-2501 60.58 2 / 2 LE2-12-2502 54.26 LE2-16-2502 63.33 LE2-20-2502 74.53 LE2-25-2502 88.58 3 / 3 LE2-12-2503 72.24 LE2-16-2503 84.13 LE2-20-2503 99.05 LE2-25-2503 116.59 4 / 4 LE2-12-2504 90.44 LE2-16-2504 104.92 LE2-20-2504 123.78 LE2-25-2504 144.59 5 / 5 LE2-12-2505 108.20 LE2-16-2505 125.85 LE2-20-2505 148.73 LE2-25-2505 172.16 Hande Code 175 175I 178 178I 225 250 45 1 / 1 LE2-12-3251 36.07 LE2-16-3251 42.39 LE2-20-3251 50.10 LE2-25-3251 60.58 2 / 2 LE2-12-3252 54.26 LE2-16-3252 63.20 LE2-20-3252 74.53 LE2-25-3252 88.58 3 / 3 LE2-12-3253 72.24 LE2-16-3253 84.13 LE2-20-3253 99.05 LE2-25-3253 116.59 4 / 4 LE2-12-3254 90.44 LE2-16-3254 104.92 LE2-20-3254 123.78 LE2-25-3254 144.59 1 / 1 LE2-12-3501 36.07 LE2-16-3501 41.18 LE2-20-3501 49.90 LE2-25-3501 61.18 2 / 2 LE2-12-3502 54.26 LE2-16-3502 63.20 LE2-20-3502 74.53 LE2-25-3502 88.58 60 350 3 / 3 LE2-12-3503 72.24 LE2-16-3503 84.13 LE2-20-3503 99.05 LE2-25-3503 116.59 4 / 4 LE2-12-3504 90.44 LE2-16-3504 104.92 LE2-20-3504 123.78 LE2-25-3504 144.59 1 / 1 LE2-12-3751 35.68 LE2-16-3751 42.39 LE2-20-3751 49.90 LE2-25-3751 61.18 2 / 2 LE2-12-3752 54.26 LE2-16-3752 62.77 LE2-20-3752 74.48 LE2-25-3752 88.58 90 375 3 / 3 LE2-12-3753 72.24 LE2-16-3753 84.13 LE2-20-3753 99.05 LE2-25-3753 116.59 4 / 4 LE2-12-3754 90.44 LE2-16-3754 104.92 LE2-20-3754 123.25 LE2-25-3754 144.59 325 325R 1 /1 LE2-12-3261 36.07 LE2-16-3261 41.18 LE2-20-3261 50.10 LE2-25-3261 61.18 45 2 / 2 LE2-12-3262 54.26 LE2-16-3262 62.77 LE2-20-3262 74.48 LE2-25-3262 88.67 325 3 / 3 LE2-12-3263 72.24 LE2-16-3263 84.36 LE2-20-3263 98.42 LE2-25-3263 116.15 Ordering Instructions Specify Body cataog# from top of coumn. Repace ( ) with Circuit Diagram Number (refer to pages 13-16 for diagrams). Seect Hande Assemby from pages 8 using Hande Code above (switch handes sod separatey). Exampe: LE2-16-1753 ( Body) LFS2-A-4-175 ( Hande Assemby) 4 Discount Schedue B7

Rotary Cam es Series LE2, Pane Mount Body Description Function Ange Poes/ Wafers Body Cataog Number Pane Mount 12 Amp Price 16 Amp Price 20 Amp Price 25 Amp Price 3 Position Hande Code 1 / 2 LE2-12-4501 48.26 LE2-16-4501 55.50 LE2-20-4501 65.38 LE2-25-4501 78.91 60 2 / 3 LE2-12-4502 72.24 LE2-16-4502 84.13 LE2-20-4502 99.05 LE2-25-4502 116.15 450 3 / 5 LE2-12-4503 102.43 LE2-16-4503 118.99 LE2-20-4503 147.44 LE2-25-4503 162.57 3 Position (with OFF) 1 / 1 LE2-12-5261 48.26 LE2-16-5261 53.74 LE2-20-5261 65.38 LE2-25-5261 78.91 45 2 / 2 LE2-12-5262 72.24 LE2-16-5262 82.08 LE2-20-5262 97.42 LE2-25-5262 116.59 525 3 / 3 LE2-12-5263 102.43 LE2-16-5263 126.05 LE2-20-5263 140.56 LE2-25-5263 162.57 4 Position 1 /2 LE2-12-4511 54.26 LE2-16-4511 61.76 60 2 / 4 LE2-12-4512 90.44 LE2-16-4512 107.36 LE2-25-4512 144.59 451 3 / 6 LE2-12-4513 126.40 LE2-16-4513 159.68 LE2-25-4513 208.37 4 Position (with OFF) 1 / 2 LE2-12-5261 48.26 LE2-16-5261 53.74 LE2-20-5261 65.38 LE2-25-5261 78.91 45 2 / 3 LE2-12-5262 72.24 LE2-16-5262 82.08 LE2-20-5262 97.42 LE2-25-5262 116.59 526 3 / 5 LE2-12-5263 102.43 LE2-16-5263 126.05 LE2-20-5263 140.56 LE2-25-5263 162.57 5 Position (with OFF) 1 / 2 LE2-12-5271 54.26 LE2-16-5271 61.07 LE2-20-5271 73.72 LE2-25-5271 88.67 45 2 / 4 LE2-12-5272 90.44 LE2-16-5272 103.58 LE2-20-5272 121.99 LE2-25-5272 143.64 527 3 / 6 LE2-12-5273 126.40 LE2-16-5273 155.37 LE2-20-5273 179.91 LE2-25-5273 208.37 6 Position 60 1 / 3 LE2-12-4531 72.24 LE2-16-4531 84.13 LE2-20-4531 99.05 LE2-25-4531 116.59 453 6 Position (with OFF) 1 /3 LE2-12-5531 77.26 LE2-16-5531 77.26 LE2-20-5531 89.52 LE2-25-5531 106.40 60 2 / 5 LE2-12-5532 133.87 LE2-16-5532 133.87 LE2-20-5532 148.73 LE2-25-5532 180.88 553 3 / 8 LE2-12-5533 181.75 LE2-16-5533 181.75 LE2-20-5533 220.28 LE2-25-5533 253.59 Ordering Instructions Specify Body cataog# from top of coumn. Repace ( ) with Circuit Diagram Number (refer to pages 13-16 for diagrams). Seect Hande Assemby from pages 8 using Hande Code above (switch handes sod separatey). Exampe: LE2-16-1753 ( Body) LFS2-A-4-175 ( Hande Assemby) Discount Schedue B7 5

Rotary Cam es Series LE2, Pane Mount Body Description Function Ange Poes/ Wafers Body Cataog Number Pane Mount 12 Amp Price 16 Amp Price 20 Amp Price 25 Amp Price START - STOP Hande Code 45 1 / 1 LE2-12-9251 35.38 LE2-16-9251 41.55 LE2-20-9251 49.59 LE2-25-9251 61.18 925 REVERSING 45 3 / 3 LE2-12-7303 66.25 LE2-16-7303 77.26 LE2-20-7303 90.88 LE2-25-7303 106.79 325 Two Speed Singe Winding (Dahander) 45 3 / 4 LE2-12-7293 89.48 LE2-16-7293 107.41 LE2-20-7293 121.99 LE2-25-7293 143.64 325 Votmeter 3 Current Transformers 45 NA / 3 LE2-12-8251 72.24 LE2-16-8251 85.12 LE2-20-8251 97.42 LE2-25-8251 116.15 45 NA / 2 LE2-12-8271 54.26 LE2-16-8271 63.33 LE2-20-8271 73.72 LE2-25-8271 92.21 Ammeter 1 / 3 LE2-12-8751 72.24 LE2-16-8751 85.12 LE2-20-8751 97.42 LE2-25-8751 116.15 90 2 / 5 LE2-12-8752 102.43 LE2-16-8752 130.72 LE2-20-8752 114.09 LE2-25-8752 171.13 825 825A 827 827A 875 Ordering Instructions Specify Body cataog# from top of coumn. Repace ( ) with Circuit Diagram Number (refer to pages 13-16 for diagrams). Seect Hande Assemby from pages 8 using Hande Code above (switch handes sod separatey). Exampe: LE2-16-1753 ( Body) LFS2-A-4-175 ( Hande Assemby) 6 Discount Schedue B7

Rotary Cam es Series LA2, Base Mounted Body Description Function Ange 90 90 Poes/ Wafers Body Cataog Number Base Mount 12 Amp Price 16 Amp Price 20 Amp Price 25 Amp Price ON - OFF 1 / 1 LA2-12-1751 35.19 LA2-16-1751 40.53 LA2-20-1751 46.42 LA2-25-1751 55.13 2 / 1 LA2-12-1752 41.19 LA2-16-1752 47.08 LA2-20-1752 54.26 LA2-25-1752 64.39 3 / 2 LA2-12-1753 52.85 LA2-16-1753 60.70 LA2-20-1753 70.17 LA2-25-1753 82.16 4 / 2 LA2-12-1754 58.51 LA2-16-1754 67.12 LA2-20-1754 78.02 LA2-25-1754 91.54 5 / 3 LA2-12-1755 70.17 LA2-16-1755 80.53 LA2-20-1755 93.92 LA2-25-1755 109.06 6 / 3 LA2-12-1756 75.84 LA2-16-1756 87.27 LA2-20-1756 101.55 LA2-25-1756 118.33 1 / 1 LA2-12-1781 35.58 LA2-16-1781 39.92 LA2-20-1781 47.34 LA2-25-1781 56.89 2 / 1 LA2-12-1782 42.29 LA2-16-1782 48.92 LA2-20-1782 55.59 LA2-25-1782 67.01 3 / 2 LA2-12-1783 54.81 LA2-16-1783 62.98 LA2-20-1783 71.22 LA2-25-1783 85.32 4 / 2 LA2-12-1784 58.79 LA2-16-1784 69.30 LA2-20-1784 79.91 LA2-25-1784 92.94 Doube Throw 1 / 1 LA2-12-2251 42.72 LA2-16-2251 48.92 LA2-20-2251 55.59 LA2-25-2251 62.54 45 225 2 / 2 LA2-12-2252 60.80 LA2-16-2252 69.30 LA2-20-2252 81.07 LA2-25-2252 95.02 Hande Code 175 175I 178 178I 45 1 / 1 LA2-12-3251 42.72 LA2-16-3251 47.70 LA2-20-3251 56.34 2 / 2 LA2-12-3252 60.80 LA2-16-3252 69.74 LA2-20-3252 81.07 3 / 3 LA2-12-3253 78.77 LA2-16-3253 90.89 LA2-20-3253 105.59 4 / 4 LA2-12-3254 96.87 LA2-16-3254 112.48 LA2-20-3254 130.21 4 Position (with OFF) 325 325R 45 1 / 2 LA2-12-5261 53.63 LA2-16-5261 61.76 LA2-20-5261 71.22 LA2-25-5261 84.25 526 5 Position (with OFF) 45 1 / 2 LA2-12-5271 60.80 LA2-16-5271 69.30 LA2-20-5271 79.91 LA2-25-5271 92.94 527 START - STOP 45 1 / 1 LA2-12-9251 42.29 LA2-16-9251 47.70 LA2-20-9251 55.59 LA2-25-9251 66.45 925 REVERSING 45 3 / 3 LA2-12-7303 72.78 LA2-16-7303 83.68 LA2-20-7303 97.52 LA2-25-7303 113.31 325 Votmeter 45 NA / 3 LA2-12-8251 78.77 LA2-16-8251 90.89 LA2-20-8251 103.36 LA2-25-8251 119.86 825 825A 45 NA / 2 LA2-12-8271 60.80 Ammeter 827 827A 90 1 / 3 2 / 5 LA2-12-8751 78.77 LA2-16-8751 90.89 LA2-20-8751 103.36 LA2-25-8751 119.86 875 3 Current Transformers Discount Schedue B7 7

Rotary Cam es Series L2 Hande Assembies Hande Assemby Mounting Method Frame Size Cataog Number Price each Hande Assemby Mounting Method Frame Size Cataog Number Price each Screw ➊➌ 48 x 48 LFS2-A-4-9.79 64 x 64 LFS2-A-6-12.90 Screw ➊ 67 x 67 LFS2-G-6-175 24.20 Type A - Type 12 Siver Legend Pate - Back nob Centra Nut ➋➌ 48 x 48 LFC2-A-4-13.60 Type G - Type 12 Grey Frame - Back Hande Centra Nut ➋ 67 x 67 LFC2-G-6-175 27.30 Screw ➊➌ 48 x 48 LFS2-E-4-14.70 64 x 64 LFS2-E-6-18.20 Screw ➊ 67 x 67 LFS2-N-6-175 24.20 Type E - Type 12 Siver Legend Pate - Back nob Centra Nut ➋➌ 48 x 48 LFC2-E-4-15.60 Type N - Type 12 Yeow Frame - Red Hande Centra Nut ➋ 67 x 67 LFC2-N-6-175 27.30 Screw ➊➌ 48 x 48 LFS2-I-4-6.17 64 x 64 LFS2-I-6-12.90 Centra Nut ➋ NA LFC2-B-001 13.60 Type I - Type 12 Yeow Legend Pate - Red nob Centra Nut ➋➌ 48 x 48 LFC2-I-4-15.60 Type B - Type 12 Grey Ring - Back nob Type L - Type 12 Yeow Legend Pate - Red nob Screw ➊➌ Centra Nut ➋➌ 48 x 48 LFS2-L-4-14.70 64 x 64 LFS2-L-6-18.00 48 x 48 LFC2-L-4-15.60 Type C - Type 12 Siver Legend Pate Centra Nut ➋ 48x48 LFC2-C -4-41.60 Ordering Instructions Specify Body cataog# from top of coumn. Where appicabe repace ( ) with ey Withdraw Code. Repace ( ) with Hande Code Number (refer to pages 9) for Legend Pate desired. Exampe: LFC2-C -4- = LFC2-C-4-553 ➊ Mounting screws incuded with Body Assy. ➋ Centra Nut mounting method cannot be used on LA stye Body Assembies. ➌ To order Hande Assemby without egend pate, repace ( ) with 001. ➍ LFS(C)2-G(N)-6-175 handes are marked I-ON and O-OFF. 8 Discount Schedue B7

Rotary Cam es Series L2 Hande Codes Hande Code Standard Legend Markings ➍ Frame Size ➊ Hande Assemby Type Screw Mount Centra Nut A E I L G N A E I L C G N Hande Code Standard Legend Markings ➍ Frame Size ➊ Hande Assemby Type Screw Mount Centra Nut A E I L G N A E I L C G N 000 Standard 451 Standard 175 Standard ➌ ➌ ➌ ➌ 453 Standard 175I Standard ➌ ➌ 525 Standard 178 Standard 526 Standard 178I Standard 527 Standard 225 Standard 553 Standard 250 Standard 825 Standard 325 Standard 825A L1-L2 Standard L2-L3 L3-L1 L1-N L2-N L3-N 325R 350 ➋ 375 Standard Standard Standard 827 827A 875 L2-L3 L1-L2 L3-L1 Standard Standard Standard 450 Standard 925 Standard ➊ Frame Size descriptions: Type: A,E,I & L C N & G Standard: 48x48 48x48 67X67 : 64x64 ➋ Avaiabe with MAN-O-AUTO or HAND-O-AUTO egend marking. ➌ LFS(C)2-G(N)-6-175 handes are marked I-ON and O-OFF. ➍ For egend pate markings not incuded here, see page 17 for Custom Name Pates. NOTE: Types N and G are not avaiabe with custom markings. Add the foowing price adder to the Hande Assemby noted on page 8. Quantity: 1-4 5-19 20-99 100-199 200-499 500+ Price Adder: $21.50 $11.90 $7.80 $3.80 $2.50 $0.00 Discount Schedue B7 9

Rotary Cam es Series L2 Moduar shaft extension system Shaft Extension Modues are idea for engthening the shaft of an LA2 switch up to 144mm ( 5.5 ). These rugged poycarbonate modues are 24mm ( 15/16 ) ong and snap on piggyback to one another without the use of toos. Strong center shafts interock as each modue is snapped together. The standard 44mm End Shaft suppied with every LA2 switch connects the ast Extension Modue with the Hande Assemby. End Shafts of 52 and 57mm are aso avaiabe, making this moduar system versatie, fast and economica. Shaft Extension Modues are suppied two per package. Moduar Shaft Extension Components (LA2 Base Mount) Component 44mm End Shaft ➋ (suppied with LA2 Body Assemby) 52mm End Shaft Cataog Number Price Each LA2-G2830 4.02 LA2-G3194 4.63 57mm End Shaft LA2-G3195 5.26 Extension Modue (two per pkg - priced per pkg) Determining moduar shaft extension components Determine Mounting Depth. This is the distance from the inside mounting surface of the encosure to the outside surface of the encosure cover. See diagram beow for detais ➊. If necessary convert Mounting Depth inches to miimeters (inches x 25.4 = miimeters). In the Moduar Shaft Extension Tabe to the right, find the Mounting Depth in the coumn under the appropriate LA2 Body. NOTE: Tabe is based on an LA2 switch body with two wafers (3 or 4 poe). For a switch body with more or ess wafers, add or subtract the foowing from overa Mounting Depth before referring to tabe: LA2-12/16 Body- ±10mm per wafer LA2-20/25 Body- ±12.5mm per wafer Order the End Shaft and number of Extension Modues required for that Mounting Depth. Moduar Shaft Extension Tabe LA2-G2853 8.37 Number of Mounting Depth (mm) ➊ Extension Modues Required End Shaft body LA2-12/16 Body LA2-20/25 0 44mm ➋ 71.5-77.5 75-80.5 0 52mm 77-87 80-90 0 57mm 82-92 85-95 1 44mm ➋ 99.5 101.5 99-105 1 52mm 97.5 111 101-114.5 1 57mm 102.5-116 106-119.5 2 44mm ➋ 119.5-125.5 123-129 2 52mm 121.5-135 125-138.5 2 57mm 126.5-140 130-143.5 3 44mm ➋ 143.5-149.5 147-153 3 52mm 145.5-159 149-162.5 3 57mm 150.5-164 154-167.5 4 44mm ➋ 167.5-173.5 171-177 4 52mm 169.5-183 173-186.5 4 57mm 169.5-183 178-191.5 5 44mm ➋ 191.5-197.5 195-201 5 52mm 193.5-207 197-210.5 5 57mm 198.5-212 202-215.5 6 44mm ➋ 215.5-221.5 219-225 6 52mm 217.5-231 221-234.5 6 57mm 222.5-236 226-239.5 ➊ For DIN rai mounted devices, remember to deduct the offset distance provided by the rai. For exampe, deduct 2.5mm from the Mounting Depth for switch bodies mounted on DIN 46277 rai. ➋ One 44mm End Shaft is suppied with a Body Assembies. 10 Discount Schedue B7

Rotary Cam es Series L2 Meta shaft extension system Adjustabe meta shaft extensions snap on securey to LA2 switches via the same quick-connect design as shaft extension modues. Meta shafts are equipped with a door interock and a padock hasp for ocking out the switch after the encosure is opened (for outside ockout, seect a Hande Assemby with ockout capabiity). Meta Shaft Extension Components (LA2 Base Mount) Component Short Meta Shaft Length: 10... 235mm (4-21/64 9-1/4 in.) Long Meta Shaft Cataog Number Price Each LA2-G3393 32.80 Two standard engths of these unique adjustabe shafts are avaiabe. Meta shaft extensions mate with any of the standard Hande Assembies. A necessary hardware is suppied with the shaft. Length: 230... 350mm (9-3/64 13-51/64 in.) Insert - For modifying meta shaft to switch position LA2-G3394 42.70 LA2-G3398 2.91 Determining meta shaft extension Determine Mounting Depth. This is the distance from the inside mounting surface of the encosure to the outside surface of the encosure cover. See diagram beow for detais ➊. Insert - For modifying meta shaft to switch any position (not ockabe) LA2-G3399 4.55 If necessary convert Mounting Depth inches to miimeters (inches x 25.4 = miimeters). In the Meta Shaft Extension Tabe to the right, find the Mounting Depth in the coumn under the appropriate LA2 Body. NOTE: Tabe is based on an LA2 switch body with two wafers (3 or 4 poe). For a switch body with more or ess wafers, add or subtract the foowing from overa Mounting Depth before referring to tabe: LA2-12/16 Body- ±10mm per wafer LA2-20/25 Body- ±12.5mm per wafer Order the Meta Shaft Extension required for that Mounting Depth. Meta Shaft Extension Tabe Meta Shaft Extension Mounting Depth (mm) ➊ body LA2-12/16 Body LA2-20/25 LA2-G3393 178 ➋ - 309 181.5 ➋ - 312.5 LA2-G3394 298-424 301.5-427.5 ➊ For DIN rai mounted devices, remember to deduct the offset distance provided by the rai. For exampe, deduct 2.5mm from the Mounting Depth for switch bodies mounted on DIN 46277 rai. ➋ This dimension can be reduced by another 55mm by cutting the pastic seeve and further cutting the meta shaft. Discount Schedue B7 11

Accessories Series L2 Accessories Accessory Description Cataog No. (Pastic Reducer incuded) End Shaft for LE switch Repacement 44mm shaft suppied standard with a switches Sod ony in packages of 5. Order 5 pieces to receive 1 pkg of 5. Price Each L2-G3380 5.26 Accessory Description Cataog No. hande assemby for 45mm standard cutout O-I OFF-ON Bank LFS2-P-4-175 LFS2-P-4-175I LFS2-P-4-000 Price Each 14.10 14.10 Termina cover 3 or 4 poe LE2-12/16 LE2-20/25 LA2-12/16 LA2-20/25 Standard knob Back 37.5mm Back 48mm Red 37.5mm Red 48mm LE2-12-C4 LE2-20-C4 LA2-12-C4 LA2-20-C4 L2-G3154N L2-G3155N L2-G3154R L2-G3155R 9.01 9.55 7.00 7.00 3.80 4.55 3.95 4.55 ABS Encosure For High Impact Appications (IP66, UL 94 Fame Resistance - HB) With pre-dried hoes for 64 x 64 operator or arger 95x150x86mm 95x150x111mm Without hoes 95x150x86mm 95x150x111mm LA2-G3572 LA2-G3573 LA2-G3574 LA2-G3575 70.10 77.00 69.20 76.20 Padockabe knob Back Red L2-G2864N L2-G2864R 8.09 8.09 Nory Encosure For Corrosion Prone Appications (IP66, UL 94 Fame Resistance - V0) Type P knob Back Red Sef contained knob - aows mounting LE2 switches without Hande Assemby IP40 protection IP65 protection Legend Pate - Bank for engraving Siver For 48 x 48 (or 62) For 64 x 64 (or 78) Yeow For 48 x 48 (or 62) For 64 x 64 (or 78) L2-G2888N L2-G2888R L2-G2851N L2-G2854N LL2-A-4-000 LL2-A-6-000 LL2-I-4-000 LL2-I-6-000 5.06 5.06 7.90 10.40 6.03 7.00 6.03 3.04 With pre-dried hoes for 64 x 64 operator or arger 95x150x86mm 95x150x111mm Without hoes 95x150x86mm 95x150x111mm LA2-G3576 LA2-G3577 LA2-G3578 LA2-G3579 98.20 108.00 96.90 108.00 Encosure Seection Guide Determine switch & number of poes; order encosure and shaft required Base Mount Poes Use Encosure... Shaft Required ➊ LA2-12 & 16 LA2-20 & 25 LA2-12 & 16 LA2-20 & 25 1 LA2-G3195 2 Standard LA2-G357(2,4,6,8) 1 LA2-G3194 2 Standard 3 LA2-G3195 4 LA2-G3194 5 LA2-G357(3,5,7,9) Standard 3 LA2-G3194 4 Standard ➊ Order shafts from page 11. 12 Discount Schedue B7

Rotary Cam es Series L2 Circuit Diagrams 13

Rotary Cam es Series L2 Circuit Diagrams 8 8 16 14

Rotary Cam es Series L2 Circuit Diagrams 15-16 13-14 11-12 9-10 7-8 5-6 3-4 1-2 X X X X 15

Rotary Cam es Series L2 Circuit Diagrams 1U 2U 2W 1W 2V 1V 10 12 16

Custom LFS2/LFC2 Name Pate Order Form Fax competed form to: In USA 800-739-7370 or in Canada 905-475-0027 Customer Information: Today s Date: Order Form of Name: Company: Address: City: State: Zip: Teephone: Job Reference/PO #: USE ONE FORM FOR EACH NAME PLATE ORDERED Quantity required exacty ike this one: For Compatibiity Verification pease incude the foowing: Cataog Number of to be used on L - - Hande Assemby to be used with L - - Quantity: 1-4 5-19 20-99 100-199 200-499 500+ Price Adder: $21.50 $11.90 $7.80 $3.80 $2.50 $0.00 NOTE: Types N and G are not avaiabe with custom markings. Ordering Instructions: 1) For reference ony, enter the switch and hande assemby part numbers in the spaces to the right. 2) Based on your seection switch ange rotation, define the appropriate tempate figure and check mark the ange rotation (30/60/45/90º) 3) Enter the desired text in the spaces provides. Text imitation is defined by the amount of _ underines provided per ange. 4) Use a new order form for each different custom namepate. SS-99-220-302 06/26/2016 CAS 17

Technica Information Series Technica Information UL/CSA L2-12 L2-16 L2-20 L2-25 Genera use 1-phase/2-phase, 3-phase/3 poes Rated current 600 V 12 16 20 25 Heavy Piot Duty code designation AC A600 A600 ~ ~ Standard Duty code designation DC ~ ~ ~ ~ Aternating Current (IEC / EN 60947-3) Rated Votage U e IEC-EN / UL-CSA (V) 690/600 690/600 690/600 690/600 Rated Isoation Votage U i IEC / UL-CSA (V) 690/600 690/600 690/600 690/600 Rated impuse votage U imp IEC (kv) 6 6 6 6 Test votage U i 1 min. (kv) 2.5 2.5 2.5 2.5 Rated frequency (Hz) 50/60 50/60 50/60 50/60 Therma rated current I th open 40ºC (A) 16 20 25 30 Therma rated current I the encosed 60ºC (A) 12 16 20 25 Wasted power by 1 poe at therma rated current I the (W) 0.3 0.5 0.6 0.9 Rated Operating Current I e AC-1/ ing resistive oads with AC21A sight overoad AC-1 Non-inductive or sighty inductive oads inductive oads AC-22A ing mixed resistive and inductive oads at sight overoad AC-15 Piot Duty Rated current ing magnetic drives, motors, vaves and soenoids Non-inductive or sighty inductive oads IEC947 690V (A) 12 16 20 25 SEV 690V (A) 12 16 20 25 IEC947 220-500V (A) 12 16 20 25 600V (A) 12 16 20 25 IEC 220-240V (A) 5 6 7 8 380-415V (A) 3 4 5 6 500V (A) 2 2.5 3 4 UL/CSA Heavy VAC A600 A600 UL/CSA ➊ (A) 12 16 20 25 Short Circuit Current Max. fuse rating of circuit (gl characteristic) (A) 35 35 60 80 Rated conditiona (ka) 5 5 5 5 Rated Operating Powers IEC/VDE/BS AC-2 Sip ring motors, starting induction 240V (kw) 3 4 5.5 5.5 motors, reversing and pugging, 380V (kw) 5.5 7.5 9 13 wye-deta starting 3Ø 415V (kw) 5.5 7.5 9 13 3 poe 440V (kw) 5.5 7.5 9 13 500V (kw) 7.5 10 11 15 660V (kw) 7.5 10 11 15 AC-3 Starting squirre-cage motors, 3Ø 220-240V (kw) 2.2 3 4.5 5.5 interruption whie running 3 poe 380-440V (kw) 4 5.5 7.5 11 500V (kw) 5.5 7.5 10 13 660V (kw) 5.5 7.5 8 11 1Ø 110V (kw) 0.75 1.1 1.2 1.6 2 poe 220-240V (kw) 1.3 2.2 2.5 3.2 380-440V (kw) 2.2 3.7 4.5 5.5 ➊ Suitabe for switching off oad (AC-20) above 660V, but ony up to 660V for switches with screws at the rear (LE switches). 18

Technica Information Series Technica Information L2-12 L2-16 L2-20 L2-25 Rated Operating Loads (cont.) IEC/VDE/BS AC-4 Starting squirre-cage 3Ø 220-240V (kw) 0.75 1.5 3 4 motors, reversing, 3 poe 380-415V (kw) 1.5 2.2 3.7 5.5 braking, pugging 440-550V (kw) 1.5 2.2 3.7 5.5 660V (kw) AC-23A Periodic switching of 3Ø 220-240V (kw) 2.2 3 4.5 5.5 motors or other highy 3 poe 380-440V (kw) 4 5.5 7.5 11 inductive oads. 500V (kw) 5.5 7.5 10 13 660V (kw) 5.5 7.5 8 11 1Ø 110V (kw) 0.75 1.1 1.2 1.6 2 poe 220-240V (kw) 1.3 2.2 2.5 3.2 380-440V (kw) 2.2 3.7 4.5 5.5 Rated Power UL/CSA (FLA) (FLA) (FLA) (FLA) Norma motor oad fu 120V (HP) 1 (7.2) 1.5 (12.0) 2 (13.6) 3 (19.2) votage rating (simiar to 3Ø 240V (HP) 2 (6.8) 3 (9.6) 4 (12.4) 6 (18.0) AC-3) 3 poe 480V (HP) 5 (7.6) 7.5 (11.0) 8 (11.6) 12 (17.0) 600V (HP) 5 (6.1) 7.5 (9.0) 10 (11.0) 15 (17.0) 1Ø 120V (HP) 0.5 (9.8) 0.75 (13.8) 1 (16) 1.5 (20.0) 2 poe 240V (HP) 1 (8.0) 1.5 (10.0) 2 (12) 3 (17.0) DC Ratings Contacts in Series 1 2 3 4 5 6 8 Rated Current I e Rated Votage [V] 24 48 72 96 120 144 192 [A] 12 16 20 22 DC-21A 48 96 144 192 240 288 384 [A] 10 12 16 18 For resistive oads T 1ms 60 120 180 240 300 360 450 [A] 8 10 12 14 U e max = 600V 110 220 330 440 550 660 [A] 2 2.5 4 5 220 440 660 [A] 0.5 0.6 0.7 0.8 440 [A] 0.4 0.4 0.5 0.5 Rated Making/Breaking Capacity (=1.5 x I e ) 1.05 x rated votage [V] 25.2 50.4 75.6 100.8 126 151.2 201.6 [A] 18 24 30 33 50.4 100.8 151.2 201.6 252 302.4 403.2 [A] 15 21 24 27 For resistive oads T 1ms 63 126 189 252 315 378 504 [A] 12 18 18 21 U e max = 600V 115.5 231 346.5 462 577.5 [A] 3 4.5 6 7.5 231 462 [A] 0.75 1.12 1.05 1.2 462 [A] 0.52 0.78 0.47 0.75 Rated Current I e Rated votage [V] 24 48 72 96 120 144 192 [A] 8 10 12 14 30 60 90 120 150 180 240 [A] 4.5 5.5 7 8 For inductive oads T = 50ms 48 96 144 192 240 288 384 [A] 1.5 2 2.5 3 U e max = 600V 60 120 180 240 300 360 450 [A] 1 1.2 1.5 1.8 110 220 330 440 550 660 [A] 0.4 0.5 0.6 0.7 Rated Making/Breaking Capacity (=1.1 x I e ) 1.1 x rated votage [V] 26.4 52.8 79.2 105.6 132 158.4 184.8 [A] 8.8 11 13.2 1.54 33 66 99 132 165 198 231 [A] 4.95 6.05 7.7 8.8 For inductive oads T = 50ms 52.8 105.6 158.4 211.2 264 316.8 369.6 [A] 1.65 2.2 2.75 3.3 U e max = 600V 66 132 198 264 330 396 462 [A] 1.1 1.32 1.65 1.98 121 242 363 484 605 [A] 4.95 6.05 7.7 8.8 Rated Power P e Rated votage [V] Contacts in Series DC-23A, DC-3, DC-5 For inductive oads T 1ms 24 1 [kw] 0.12 0.15 0.20 0.25 24 2 [kw] 0.20 0.25 0.30 0.37 48 2 [kw] 0.25 0.30 0.37 0.50 48 3 [kw] 0.30 0.37 0.50 0.75 60 2 [kw] 0.25 0.30 0.37 0.50 60 4 [kw] 0.37 0.50 0.75 1.00 110 4 [kw] 0.50 0.75 1.00 1.20 110 6 [kw] 1.00 1.20 1.40 1.60 220 4 [kw] 0.37 0.50 0.75 1.00 220 6 [kw] 1.00 1.20 1.40 1.50 19

Technica Information Series Technica Information L2-12 L2-16 L2-20 L2-25 Rated Making/Breaking Capacity (=4 x I e ) 1.05 x rated votage [V] Contacts in Series 25.2 1 [kw] 20.0 25.0 33.3 41.6 25.2 2 [kw] 33.3 41.6 50.0 61.6 DC-23A, DC-3, DC-5 50.4 2 [kw] 21.0 25.0 30.8 41.6 For inductive oads T 50.4 3 [kw] 25.0 30.8 42.0 62.4 7.5ms 63 2 [kw] 16.6 20.0 24.6 33.2 63 4 [kw] 24.6 33.3 50.0 66.4 115.5 4 [kw] 18.1 27.2 36.4 44.0 115.5 6 [kw] 36.4 43.6 51.0 58.2 231 4 [kw] 6.7 9.1 13.6 18.2 231 6 [kw] 18.1 21.8 25.2 27.2 Maximum Wire Gauges Rigid Wire AWG (2)18 12 (2)18 12 (2)16 10 (2)16 10 [mm 2 ] (2)1 2.5 (2)1 2.5 (2)1.5 6 (2)1.5 6 Fine Strands AWG (2)18 12 (2)18 12 (2)16 10 (2)16 10 [mm 2 ] (2)1 2.5 (2)1 2.5 (2)1.5 4 (2)1.5 4 Max. Torque Ratings [b-in] 9 9 10.6 10.6 [Nm] 1 1 1.2 1.2 Protection Cass Hande Assemby LFS2-G(N)-6 UL Type 12 Type 12 Type 12 Type 12 A others IEC 529 IP66 IP66 IP66 IP66 Body IEC 529 IP20 IP20 IP20 IP20 Mechanica Life Miions of operations 1 1 1 1 Rated Breaking Capacity 220V (A) 72 96 128 176 Power factor 0.65 0.65 0.65 0.35 380V (A) 72 96 128 176 Power factor 0.65 0.65 0.65 0.35 660V (A) 53 72 86 112 Power factor 0.65 0.65 0.65 0.65 Ambient Temperature (Fº) (Fº) (Fº) (Fº) Operation Min Max (C ) -25 +60 (-13 +140) -25 +60 (-13 +140) -25 +60 (-13 +140) -25 +60 (-13 +140) Storage ony Min Max (C ) -40 +80 (-40 +176) -40 +80 (-40 +176) -40 +80 (-40 +176) -40 +80 (-40 +176) Maximum Atitude (without derating) (m) 2000 2000 2000 2000 (ft.) 6561 6561 6561 6561 Maximum Mechanica Operations (without derating) (cyce/hr.) 1200 1200 1200 1200 Maximum Eectrica Operation (without derating) (cyce/hr.) 120 120 120 120 20

Dimensions Series LE2 Pane Mount - Screw Fixing Dimensions are in miimeters (inches). Dimensions not intended for manufacturing purposes. LE2-20/25 LE2-12/16 Type Q Dim P Dim LFS2-A-4 48 X 48 28 LFS2-I-4 48 X 48 28 LFS2-A-6 64 X 64 28 LFS2-I-6 64 X 64 28 LFS2-N-6 67 X 67 34 LFS2-G-6 67 X 67 34 L DIM (# of wafers) Type 1 2 3 4 5 6 7 8 LE2-12/16 44 54 64 74 84 94 104 114 LE2-20/25 44.5 57 69.5 82 94.5 107 119.5 132 LE2 Pane Mount - Centra Nut Fixing L DIM (# of wafers) Type 1 2 3 4 5 6 7 8 LE2-12/16 67.5 77.5 87.5 97.5 107.5 117.5 127.5 137.5 LE2-20/25 69 81.5 94 106.5 119 131.5 144 156.5 21

Dimensions Series LA2 Base Mount Dimensions are in miimeters (inches). Dimensions not intended for manufacturing purposes. Type Q Dim P Dim B Dim LFS2-A-4 48 X 48 28 36 LFS2-I-4 48 X 48 28 36 LFS2-A-6 64 X 64 28 48 LFS2-I-6 64 X 64 28 48 LFS2-N-6 67 X 67 34 48 LFS2-G-6 67 X 67 34 48 L DIM (# of wafers) Type 1 2 3 4 LA2-12/16 58 68 78 88 LA2-20/25 59 71.5 84 96.5 * Add 2.5mm for DIN rai 46277. Type Q Dim B Dim LFS2-A-4 48 X 48 36 LFS2-I-4 48 X 48 36 LFS2-A-6 64 X 64 48 LFS2-I-6 64 X 64 48 LFS2-N-6 67 X 67 48 LFS2-G-6 67 X 67 48 LA2 Base Mount with Moduar Shaft Extensions Shaft F Y Dim LA2-G2830 2.5-9.5 LA2-G3194 9-18 LA2-G3195 14-23 R LA2-12/16 L Dim (# of wafers) LA2-20/25 1 2 3 4 1 2 3 4 1 Modue 82 92 102 112 83 95.5 108 120.5 2 Modues 106 116 126 136 107 119.5 132 144.5 3 Modues 130 140 150 160 131 143.5 156 168.5 4 Modues 154 164 174 184 155 167.5 180 192.5 5 Modues 178 188 198 208 179 191.5 204 216.5 6 Modues 202 212 222 232 203 215.5 228 240.5 * Add 2.5mm for DIN rai 46277. With more than 4 modues attach the first one to the switch with the screws suppied with the LA2-G2853. 22

Dimensions Series LA2 Base Mount with Meta Shaft Extension Dimensions are in miimeters (inches). Dimensions not intended for manufacturing purposes. L DIM (# of wafers) Type 1 2 3 4 LA2-12/16 54 64 74 84 LA2-20/25 55 67.5 80 92.5 Type A Dim LA2-G3393 110-235 LA2-G3394 230-350 * Add 2.5mm for DIN rai 46277. LA2 Base Mount with LFS2-P-4 L DIM (# of wafers) Type 1 2 3 4 LA2-12/16 35 45 55 65 LA2-20/25 35.5 48 60.5 73 * Add 2.5mm for DIN rai 46277. 23

R-Line Series 40 Amp Rotary Cam es R-Line Rotary Cam es Rugged and dependabe 40 amp switches for industria appications Sprecher + Schuh s rugged R-Line rotary cam switches are avaiabe for most contro and oad appications up to 40 amps. A we thought out ordering system provides many standard and nonstandard configurations, that are often avaiabe off the shef. Many popuar switching configurations are offered from stock. For many appications R-Line contro and oad switches compy with the most important internationa standards for use as: Changeover es - for switching between aternate eectrica suppies. ON/OFF switches - to connect and disconnect any eectrica suppy. Muti-position oad switches - for the step contro of oads such as heaters and furnaces. Motor oad disconnect switches - for safey isoating circuits during repair and maintenance. Reversing switches - to change the direction or rotation of a motor. Wye-Deta switches - To manuay contro reduced votage starting of a motor. Rugged quaity The R-Line s sturdy design incorporates a positive switching action with a ceary defined switch position. The contact assembies themseves are brass pated and have generous copper content to hep dissipate heat. Soid connections The termina connections are a captive screw design with sef-ifting sadde camps. The sadde camp design guarantees reiabe connections on the R-40. The switch connection terminas are finger safe with IP20 protection. Choose from various switch hande assembies hande assembies for our Changeover and ON-OFF switches are avaiabe with either traditiona screw fixing or centra nut fixing system. A switch handes offer Type 12 IP66 protection. A UL 4X hande is aso avaiabe, ordered separatey. 24

Rotary Cam es Series R-Line R-Line Front Mounted 40 Amp Rotary es with Hande ➊ Description Hande Type 12/ IP66 ➌ Function ➋ Screw Fixing Screw Fixing Ange ON - OFF Poes/ Wafers Cataog Number Price each 90 1 / 1 RE-40-1751-A 78.00 90 2 / 1 RE-40-1752-A 89.66 90 3 / 2 RE-40-1753-A 112.44 90 4 / 2 RE-40-1754-A 123.88 90 6 / 3 RE-40-1756-A 158.31 90 3 / 2 RE-40-1753-N 126.85 90 4 / 2 RE-40-1754-N 138.29 90 6 / 3 RE-40-1756-N 172.72 Body Description Hande Type 12/ IP66 ➌ Function ➋ Screw Fixing Poes/ Ange Wafers Step Cataog Number Price each 45 1 / 2 RE-40-5261-A 158.33 Reversing 45 3 / 3 RE-40-7303-A 161.59 Centra Nut Fixing 90 2 / 1 RC-40-1752-B 104.90 90 3 / 2 RC-40-1753-B 129.87 90 4 / 2 RC-40-1754-B 141.42 90 6 / 3 RC-40-1756-B 176.17 Screw Fixing Wye-Deta 45 /90 3 / 4 RE-40-7323-A 202.07 Centra Nut Fixing Screw Fixing Screw Fixing ey remova 90 2 / 1 RC-40-1752-DD 133.00 90 3 / 2 RC-40-1753-DD 157.97 90 4 / 2 RC-40-1754-DD 169.52 90 6 / 3 RC-40-1756-DD 204.27 Changeover 45 1 / 1 RE-40-3251-A 94.23 45 2 / 2 RE-40-3252-A 128.12 45 3 / 3 RE-40-3253-A 166.80 45 4 / 4 RE-40-3254-A 204.07 45 3 / 3 RC-40-3253-B 180.31 45 4 / 4 RC-40-3254-B 217.47 Screw Fixing Screw Fixing Singe Winding (Two Speed) 45 3 / 4 RE-40-7293-A 215.33 R-Line Rotary Cam es ey remova 45 3 / 3 RC-40-3253-DC 208.41 45 4 / 4 RC-40-3254-DC 245.57 Centra Nut Fixing See Ordering Instructions on next page. ➊ Rated current can be ower depending on appication. Check R-Line Technica Section before seecting switch size. ➋ See 30 for Circuit Diagrams. ➌ See page 8 for description of switch handes. Discount Schedue B7 25

Rotary Cam es Series R-Line R-Line Base Mounted 40 Amp Rotary es with Hande ➊ Body Description Poes/ Hande Type 12/ IP66 ➌ Function Ange Wafers ON-OFF Cataog Number ➋ Price each 90 3 / 2 RA-40-1753-A 128.02 90 4 / 2 RA-40-1754-A 139.57 90 6 / 3 RA-40-1756-A 172.90 Screw Fixing 90 3 / 2 RA-40-1753-N 142.43 90 4 / 2 RA-40-1754-N 153.98 90 6 / 3 RA-40-1756-N 187.31 Screw Fixing A UL Type 4X switch hande is avaiabe for RA-40 switches. First seect switch from this page, then turn to Accessories Section (page 27) and order Type R switch hande separatey. R-Line Rotary Cam es Ordering Instructions RE-40 1753 A Configuration Circuit Diagram # ➋ Hande Code ➌ for use with RE - Front (Pane) Mounted 40 amp switch RA - RC - Base Mounted 40 amp switch Front (Pane mounted Centra Nut fixing 1751-1756 ON-OFF 3251-3504 Changeover 5261 Step 7293 Singe Winding 7303 Reversing 7323 Wye-Deta Cataog numbers incude a compete switch and hande kit. A - B - N - DC - DD - Type A Type B ➍ Type N Type DC ➍ Type DD ➍ RE/RA switch RC switch RE/RA switch RC switch RC switch ➊ Rated current can be ower depending on appication. Check R-Line Technica Section before seecting switch size. ➋ See 30 for Circuit Diagrams. ➌ See page 8 for description of switch handes. ➍ Not avaiabe on RA-40 Base Mounted switches. 26 Discount Schedue B7

Accessories Series R-Line R-Line Accessories Accessory Description Cataog No. Price Accessory Description Cataog No. Price (Reducer not incuded) Repacement Shaft for RE switch (One suppied with each LE switch) L2-G3380 5.26 Front frame (bank namepate) L2-G3196 13.90 Standard knob 37.5 mm Back Red 48 mm Back Red L2-G3154N L2-G3154R L2-G3155N L2-G3155R 3.84 3.95 Legend pate - bank for engraving Siver LL2-A-6-000 7.00 Yeow LL2-I-6-000 3.04 Padockabe knob Back L2-G2864N 8.09 Red L2-G2864R 8.09 Legend pate - O - I, 90 Yeow LL2-I-6-175 3.04 LFS2-N Sef-contained knob aows mounting RE-40 switches without Hande Assemby IP40 protection L2-G2851N 7.90 IP65 protection L2-G2854N 10.40 ON-OFF Hande Assemby Type 12, IP66, accepts 3 padocks Yeow and Red LFS2-N-6-175 24.20 Gray and back LFS2-G-6-175 24.20 Type R ON-OFF Hande Assemby ➊➋ Screw fixing. Type 3R, 3, 12, 4, 4X, and IP66 Back and Back Yeow and Red Type R ON-OFF Hande Assemby ➊➋ Screw fixing. Type 3R, 3, 12, 4, 4X, and IP66 Back and Back Yeow and Red LA7-SB LA7-SY L11-PB L11-PY See page L9 See page L30 Termina cover - 3 or 4 poe For RA-40 RA-40-C4 15.99 For RE-40 RE-40-C4 11.71 Dust Cover (not IP rated) FOR RE-40 1 or 2 switch wafers RE-G3180 33.79 3 or 4 switch wafers RE-G3181 38.17 5 or 6 switch wafers RE-G3182 44.37 R-Line Rotary Cam es ➊ hande can be fied modified to be defeatabe or non-defeatabe. ➋ Handes LA7-S_ and L11-P_ require R-type Hande Shaft Extension. See page L13. Discount Schedue B7 27

Rotary Cam es Series R-Line Moduar Shaft Extension system ➊ Shaft Extension Modues are idea for engthening the shaft of an RA-40 switch up to 144mm ( 5.5 ). These rugged poycarbonate modues are 24mm ( 15/16 ) ong and snap on piggyback to one another without the use of toos. Strong center shafts interock as each modue is snapped together. The standard 44mm end shaft suppied with every RA-40 switch connects the ast Extension Modue to the Hande Assemby. End shafts of 52 and 57mm are aso avaiabe, making this moduar system versatie, fast and economica. Shaft Extension Modues are suppied two per package. Moduar Shaft Extension Components (RA40 Base Mount) Component Cataog Number Price ea. 44mm End Shaft (suppied with RA-40 Body Assemby) 52mm End Shaft 57mm End Shaft LA2-G2830 4.02 LA2-G3194 4.63 RA-40 Body Extension Modue (two per pkg - priced per pkg) LA2-G3195 5.26 R-Line Rotary Cam es Determining moduar shaft extension components Determine mounting depth. This is the distance from the inside mounting surface of the encosure to the outside surface of the encosure cover. See diagram beow for detais. If necessary, convert mounting depth inches to miimeters (inches x 25.4 = miimeters). In the Moduar Shaft Extension Tabe to the right, find the correct range for your encosure in the Mounting Depth coumn. NOTE: Tabe is based on an RA-40 switch body with two wafers (3 or 4 poe). For a switch body with more or ess wafers, add or subtract the foowing from overa Mounting Depth before referring to tabe: RA-40 Body - ±17.5mm per wafer Order the End Shaft and number of Extension Modues required for that mounting depth. Moduar Shaft Extension Tabe Number of Extension Modues Required End Shaft LA2-G2853 8.37 Mounting Depth (mm) Body RA-40 0 44mm ➋ 98.5-104.5 0 52mm 100.5-114 0 57mm 109-119 1 44mm ➋ 122.5-128.5 1 52mm 124.5-138 1 57mm 133-143 2 44mm ➋ 146.5-152.5 2 52mm 148.5-162 2 57mm 157-167 3 44mm ➋ 170.5-176.5 3 52mm 172.5-186 3 57mm 181-191 4 44mm ➋ 194.5-200.5 4 52mm 196.5-210 4 57mm 205-215 ➊ For Type R (4X) switch hande shaft extensions, see Type R Hande Extension tabe on page 29. ➋ One 44mm End Shaft is suppied with a Body Assembies. 28 Discount Schedue B7

Rotary Cam es Series R-Line Meta shaft extension system ➊ Adjustabe meta shaft extensions snap on securey to RA- 40 switches via the same quick-connect design as shaft extension modues. Meta shafts are equipped with a door interock and a padock hasp for ocking out the switch after the encosure is opened (for outside ockout, seect a Hande with ockout capabiity). RA-40 Body Two standard engths of these unique adjustabe shafts are avaiabe. Meta shaft extensions mate with any of the standard Handes. A necessary hardware is suppied with the shaft. Determining meta shaft extension Determine Mounting Depth. This is the distance from the inside mounting surface of the encosure to the outside surface of the encosure cover. See diagram beow for detais. Meta Shaft Extension Components (RA40 Base Mount) Component Cataog Number Price each Short Meta Shaft Length: 10... 235mm (4-21/64 9-1/4 in.) Long Meta Shaft Length: 230... 350mm (9-3/64 13-51/64 in.) Meta Shaft Extension Tabe Meta Mounting Depth (mm) Shaft Body Extension RA-40 LA2-G3393 205 ➋ - 336 LA2-G3394 325-451 LA2-G3393 32.80 LA2-G3394 42.70 If necessary convert Mounting Depth inches to miimeters (inches x 25.4 = miimeters). In the appropriate tabe to the right, find the correct range for your encosure in the Mounting Depth coumn. NOTE: Tabes are based on an RA-40 switch body with two wafers (3 or 4 poe). For a switch body with more or ess wafers, add or subtract the foowing from overa Mounting Depth before referring to tabe: RA-40 Body- ±17.5mm per wafer Order the Meta Shaft Extension required for that Mounting Depth and switch hande. Type R Hande Shaft Extensions ➌ Ony seect shaft extension from this tabe if ordering the Type R (UL Type 4X) Hande from the Accessories Section (page 27). Seect shaft after figuring overa Mounting Depth. Type R Hande Shaft Extension (typica) Mounting Depth (mm) Body RA-40 119-143 142-166 149-173 167-191 Cataog Number LA7-S-67 LA7-S-90 LA7-S-97 LA7-S-115 Adjustabe R-type Hande Shaft Extension (LA7-S1-P shown) See Page L13 R-Line Rotary Cam es ➊ Not for Type R (UL 4X) switch handes. Use Type R Hande Extension tabe on this page. ➋ This dimension can be reduced by another 55mm by cutting the pastic seeve and further cutting the meta shaft. ➌ Shaft incuded in package is designed for LA7-S_ and L11-P_ ony. Not designed for use with previous L10-H_ handes. Maximum ength of 368 mm (14.5") 119-191 LA7-S1-P See Incudes a parts except L11-S1 Page LA7-NS-P shaft, order separatey L13 Discount Schedue B7 29

Rotary Cam es Series R-Line Circuit Diagrams 8 8 16 2U 1U 2W R-Line Rotary Cam es 1W 2V 0 1V Y 30

Technica Information Series R-Line Rotary Cam es Technica Information R-40 Rated Operating Votage UL/CSA [V] 600 IEC/VDE/BS [V] 690 Rated Isoation Votage Impuse [V] 8 Continuous 690 Rated Therma Current I th UL/CSA [A] 40 IEC/VDE/BS [A] 45 Rated Therma Current I the IEC/VDE/BS [A] 45 Rated Operating Current I e AC-1/ ing resistive AC21A oads with sight overoad AC-22A ing mixed resistive and inductive oads at sight overoad IEC947 690V [A] 40 IEC947 220-500V 600V [A] 40 Short Circuit Current Rated conditiona (note type & fuse size) [ka] 5 Maximum fuse rating of circuit, non-encosed [A] 40 UL fuse type Cass J Rated Operating Powers P e ➊ AC-3 Squirre-cage motors: 3Ø 230V [kw] 7.5 starting and stopping of 3 poe 400V [kw] 18.5 running motors 690V [kw] 18.5 AC-4 Starting squirre-cage 3Ø 230V [kw] 5.5 motor starting, 3 poe 400V [kw] 7.5 reversing, eectric braking, inching 500V [kw] 11 AC-23A Periodic switching of motors or other highy inductive oads. Rated Power Across the ine AC motor starting DOL-rating 3Ø 230V [kw] 11 3 poe 400V [kw] 11 690V [kw] 22 UL/CSA 120V [HP] 5 3Ø 240V [HP] 10 3 poe 480V [HP] 25 600V [HP] 25 1Ø 120V [HP] 2 2 poe 240V [HP] 5 480V [HP] 10 600V [HP] 15 Genera use 600VAC [A] 40 Rated Breaking Capacity 690V [A] 196 Power factor 0.45 DC-20 ing Rated operating current I e [A] 40 DC-1 ing DC-21A ing Rated operating current I e [A] 25 V max poe [V] 60 DC-23 ing 24VDC [kw] 0.3 (1) Rated power 48VDC [kw] 0.5 (2) (the numbers in brackets indicate the number 60VDC [kw] 1 (2) of poes that must be connected in series) 110VDC [kw] 2 (3) 220VDC [kw] 2.2 (5) R-40 DC-13 ing 24VDC [A] 16 L/R = 40ms 48VDC [A] 8 60VDC [A] 4.8 110VDC [A] 2 220VDC [A] 0.6 380VDC [A] 0.4 500VDC [A] 0.3 Maximum Wire Gauges Singe/muti-core wire (1 wire) [mm 2 ] 10/6 [AWG] 8/10 Singe/muti-core wire (2 wires) 10/10 10/10 [AWG] 8/10 Minimum Wire Gauges (1 wire) Singe/muti-core wire [mm 2 ] 4/2.5 [AWG] 12/14 Terminas Screw Termina Type M4 Protection Cass Hande Assemby LFS2-G(N)-6 UL / IEC 529 Type 12 / IP66 LA7-SB/SY UL 4/4X LFS(C)2-4(6, 8, 13) UL / IEC 529 Type 12 / IP66 Body IEC 529 IP20 Mechanica Life [Miions of ops.] 1 Maximum Mechanica Operations (without derating) [cyce/hr.] 1200 Maximum Eectrica Operation (without derating) [cyce/hr.] 120 Ambient Temperature Operation Min Max [C ] -25 +60 Storage ony Min Max [C ] -40 +80 Maximum Atitude (without derating) [m] 2000 [ft.] 6561 Approvas R-Line Rotary Cam es ➊ Vaues approved by IMQ 31

Dimensions Series R-Line Rotary Cam es Type G/N RE-40 Pane Mounting Dimensions are in miimeters (inches). Dimensions not intended for manufacturing purposes. Type A 1...4 mm 1...4 mm L 36x36 or 48x48 33 67x67 34 64x64 28 61 ø 3.2 9.5 ø 3.2 Dri Pan (operator) Screw Fixing (RE-40) L Dim (# of wafers) Type 1 2 3 4 RE-40 41 58.5 76 93.5 Type D (RC-40) Type B (RC-40) 1...6 mm 41 ø 30 28 24.5 Dri Pan (operator) Centra Fixing (RC-40) L Dim (# of wafers) Type 1 2 3 4 5 6 7 8 RC-40 86 103.5 121 138.5 156 173.5 191 208.5 L RA-40 Base Mounting Type G/N Type A Y 36x36 or 48x48 70 R-Line Rotary Cam es 67x67 34 64x64 For LA7-SB/SY Hande Dimensions see page L22 For L11-PB/PY Hande Dimensions see page L53 X 28 L 70 Dri Pan (operator) 17 ø 3.2 70 M4 Dri Pan (base) L Dim (# of wafers) Type 1 2 3 4 RA-40 42.5 60 77.5 95 32

Dimensions Series R-Line Rotary Cam es RA-40 Base Mount with LA2-G339_ Meta Shaft Extension Dimensions are in miimeters (inches). Dimensions not intended for manufacturing purposes. L Dim (# of wafers) Type 1 2 3 4 RA-40 42.5 60 77.5 95 * Add 2.5mm for DIN rai 46277. Type A Dim LA2-G3393 110-235 LA2-G3394 230-350 R-Line Rotary Cam es 33

Dimensions Series R-Line Rotary Cam es Notes R-Line Rotary Cam es 34 Discount Schedue B7