Tubing, Fittings and ir Handling System omponents
INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services Layout and design services ORDER INSTRUTIONS
LYING OUT TUING SYSTEM TUING SSEMLY orrect Fitting Use long turn 90 TY" fitting Incorrect Fitting Do not use steam or water fittings Preferred onnection where two horizontal mains join
TUING Standard Length at. No. () Steel luminum/ss Gauge When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 5
ELOWS 45 R R 90 45 R at. No. () (ID) R Gauge at. No. () (ID) R Gauge 50L90 60L90 at. No. () (ID) R Gauge 6 R 90 at. No. () (ID) R Gauge 50SRL90 60SRL90 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
LONG RDIUS ENDS Radius end Radius end R 45 R 90 45 on 24" enter Line at. No. () R Gauge 6 6 6 45 on 30" enter Line at. No. () R Gauge 6 45 on 36" enter Line at. No. () R Gauge 6 6 6 45 on 48" enter Line at. No. () R Gauge 6 45 on 60" enter Line at. No. () R Gauge 90 on 24" enter Line at. No. () R Gauge 6 6 6 90 on 30" enter Line at. No. () R Gauge 6 90 on 36" enter Line at. No. () R Gauge 6 6 6 90 on 48" enter Line at. No. () R Gauge 6 90 on 60" enter Line at. No. () R Gauge 60Q90 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
45 YLs H E at No. Size () E F H K R K R 45 F When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
45 YLs K H E (ID) F R 45 at. No. Size () Fig. No. E F H K R H E () K R 45 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 9
90 TYs at. No. Size () E F H K R H E K R 90 F 59T05 69T05 69T06 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
90 TYs K H R 90 F E at. No. Size () Fig. No. E F H K R K H R 90 E When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
DOULE FITTINGS Standard Double 90 TYs K H R 90 F E at.no. Size () E F H K R 59DT05 5 5 69DT06 6 6 Standard Double 45 YLs H E at.no. Size () E F H K R K R F 45 5 5 6 6 K H E R F 90 F Standard Double 90 Elbows at.no. Size () E F H K R 50DL90 5 5 60DL90 6 6 When Ordering Specify Material: arbon Steel, Galvanized Steel, Stainless Steel and luminum.
OUPLINGS Reducing ouplings D D E E F at. No. Size D () x (ID) F E Gauge * Slip ouplings Slip oupling at No. Size (ID) Gauge 0550 0660 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
DPTERS Male dapters at. No. D (MPT) x () Gauge D Expanded Male dapters D at. No. D (MPT) x (ID) Gauge Female dapters at. No. D (FPT) x () Gauge D Expanded Female dapters at. No. D (FPT) x (ID) Gauge D When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.
DPTERS Female Reducing dapters at. No. D (FPT) x () Gauge D Expanded Female Reducing dapters D at. No. D (FPT) x (ID) Gauge H dapter Tees at. No. (ID) x D (FPT) H D 90 Elbow dapters D at. No. (ID) x D (FPT) E E D 45 Female Elbow dapters at. No. (ID) x D (FPT) R Gauge R 45 Male dapter Nipples at. No. (ID) (MPT) 2-1/8" Male dapters at. No. (MPT) x When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above.
MISELLNEOUS 3/8" Hole Tubing Hanger Tubing Hangers at. No. (ID) Gauge 00H50 00H60 Tubing Plugs at. No. () D D at. No. (ID) D D Slip Welding ollar Tubing Nipples at. No. () Gauge Slip Welding ollars at. No. (ID) Gauge When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above.
JOINING METHS Quick lamp oupling ap Size ouplings aps Part No. Length Part No. Length Quick lamp ouplings & aps ompression ouplings ompression oupling Tube Size Part No. Length Number olts olt Size Weight
RUER SLEEVES ND LMPS Normal Size Type Nominal ID Length High Temperature Sleeve With lamps Part No. lamp Only Part No. lamp Qty. 6 6 6 6 6 5 5 6 LM90005 5 6 LM90005 6 6 6 6 6 LM90006 6 6 6 6 6 LM90009 6 LM90009 LM90009 SMP WP
SHRINK SLEEVES at. No. Part No. Tube Size 50S50 5 60S60 6 1 2 3 Do Not Use Pin Point Flame. 4 WETHER PS Outlet Size (ID) Part No. W90005 W90006 W90009 3" - 8" 10" - 22"
HOSES Note: HOSE SSEMLIES (EXEPT TUFF-FLEX ND YELLOW R RE PRUTS) RE TESTED FOR ELETRIL ONDUTIVITY TO SSURE STTI ELETRIITY IS MINIMIZED. Inside Lengths and Part Numbers Hose Type Diameter 12 1 /2' 25' 37 1 /2' 50' Light-Duty HI 1 PV 1 /2" HOS90164 HOS90166 HOS90168 HOS90170 2" HOS90176 HOS90178 HOS90180 HOS90182 Medium-Duty Polyethylene TUFF-FLEX NON STTI RESISTNT 1 1 /4" HOS90081 HOS90082 HOS90212 HOS90083 1 1 /2" HOS90077 HOS90078 HOS90079 HOS90080 2" HOS90084 HOS90085 HOS90086 HOS90087 1 1 /2" HOS90088 HOS90089 HOS90090 HOS90091 Heavy-Duty PV KLM 1 1 /2" HOS90188 HOS90190 HOS90192 HOS90194 2" HOS90200 HOS90202 HOS90204 HOS90206 Heavy-Duty Urethane SPENER-FLEX 1 1 /2" HOS90241 HOS90243 HOS90245 HOS90247 Heavy-Duty Vinyl PYTHON 1 1 /2" HOS90101 HOS90103 HOS90105 HOS90107 2" HOS90109 HOS90111 HOS90113 HOS90115 Heavy-Duty Rubber RHINO 1 1 /2" HOS90117 HOS90119 HOS90208 HOS90121 2" HOS90123 HOS90125 HOS90210 HOS90127
HOSES R RE KIT K90104 K90108 Replacement rubber backing RU90001 Weight (lbs./ft.) Vacuum Rating "Hg olor Flexibility Durability pplication onstruction.26.37 26 25 Grey Grey Excellent Excellent Fair Fair ommercial, Light Industrial Duty, Offices (Temp Range: 20 to +150 F) Fiber-reinforced PV Hose over Spring Steel Helix Static Resistant.28.41.50 25 20 12 Grey lue lue Excellent Excellent Excellent Good Good Good General Vacuum leaning, ommercial, ar Wash, Offices (Temp Range: 20 to +150 F) Polyethylene Two-Piece onstruction rush Proof.41 20 Orange Excellent Good.40.50 28 28 lue lue Good Good Very Good Very Good General Service, Schools, Industrial leaning (Temp Range: 22 to +104 F) PV ompound Plastic Helix opper Ground Wire brasion Resistant Static Resistant.32 24 lue w/ lack Very Good Excellent General Service, Industrial leaning, Schools (Temp Range: 40 to +170 F) PV Helix Urethane ore brasion Resistant opper Ground Wire hemical Resistant Static Resistant.50.60 29.8 29.8 lue lue Very Good Very Good Very Good Very Good General Service, Schools, Hospitals, lean Rooms (Temp Range: 20 to +120 F) Smooth Vinyl over Steel Wire Nylon Yarn Foam Inner Wall hemical Resistant Static Resistant.7.9 28 28 lack lack Good Good Excellent Excellent Industrial and Heavy ommercial Vacuum leaning in Factories, Foundries (Temp Range: 40 to +200 F) raided SS Ground Wire Nitrile Rubber Tube brasion Resistant Neoprene over Oil Resistant Static Resistant
WLL INLET VLVES FOR 1-1/2" DIMETER HOSE NOTE: Optional lock type covers are available. 2" male thread-exposed pipe. The popular (standard) valve. 2 11 /32" long. VLV90083 (VLV90091 Lock Type) (8720-Type E) 1.13 lb. 2" female thread-exposed pipe. 2 13 /32" long. VLV90101 (VLV90102 Lock Type) (8815-Type E) 1.50 lb. 2" male thread VLV90083 with standard flange. VLV90084 (VLV90093 Lock Type ) (8705-Type D) 1.50 lb. 2" female thread VLV90101 with standard flange. VLV90103 (VLV90104 Lock Type) (8805-Type D) 1.78 lb. 2" male thread VLV90083 with recessed flange. VLV90085 (VLV90095 Lock Type ) (8705-Type D) 1.63 lb. 2" female thread VLV90101 with recessed flange. VLV90105 (VLV90106 Lock Type) (8810-Type D) 1.75 lb. 2" male thread-exposed pipe with short body. 1 7 /8" long. VLV90087 (VLV90092 Lock Type) (8730-Type E) 1.00 lb. 2" male thread VLV90087 with standard flange. For limited wall space. VLV90088 (VLV90094 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread-exposed pipe. Use when a1 1 / 2" thread must be used. 2 7 /16" long. VLV90082 (VLV90090 Lock Type) (8740-Type ) 1.13 lb. 1 1 / 2" male thread VLV90082 with standard flange. VLV90089 (VLV90097 Lock Type) (8745-Type ) 1.25 lb. 2" male thread VLV90087 with recessed flange. For limited wall space. VLV90086 (VLV90096 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread VLV90082 with recessed flange. VLV90098 (VLV90099 Lock Type) (8745-Type ) 1.25 lb. 304SS version of an 8720 Type E inlet valve with 2" male thread valve. VLV90239 1.13 lb. 304SS recessed flange to fit VLV90239. FLG90024 0.3 lb. 304SS standard flange to fit VLV90239 (Not Shown). FLG90025 0.2 lb.
FLOOR INLET VLVES FOR 1-1/2" DIMETER HOSE It is recommended that the hose be connected to these valves using a Part No. EVT90005 floor elbow. 2" male thread Installed flush with floor surface. VLV90110 (VLV90111 Lock Type) (8900-Type G) 1.88 lb. 2" male thread eveled edge designed for use with carpets. VLV90112 (VLV90113 Lock Type ) (8905-Type R) 1.88 lb. hrome plated version of a VLV90110 Type G floor valve. VLV90246 1.9 lb. 304SS version of a VLV90110 Type G floor valve. VLV90227 1.9 lb. LOKING INLET VLVES Optional lock type covers can be furnished on all wall and floor inlet valves designed for use with 1 1 /2" diameter hose. Easy-Lift keyless floor valve. VLV90449 omplete valve (chrome body with aluminum cover/lid) LIV90036 luminum cover/lid only (replacement for existing valves) INLET VLVES FOR 2" DIMETER HOSE OR LRGER 2" male thread-exposed pipe. ccepts 2" male hose coupling. VLV90100 (8755-Type I) 1.25 lb. 3" male thread-exposed pipe. ccepts 3" male hose coupling. VLV90108 (8675-Type L) 4.25 lb. 2 1 /2" male thread-exposed pipe. ccepts 2 1 /2" male hose coupling. VLV90107 (8690-Type J) 2.75 lb. 4" male thread-exposed pipe. ccepts 4" male hose coupling. VLV90109 (8676-Type K) 6.25 lb. 5", 6" and 8" inlet valves are also available.
IR GTE VLVES Diameter () Galvanized Part No. *Stainless Steel Part No. *luminum Part No. at. No. Length () Housing Width () Tubing L (D) Housing Length (E) djustment Slide (F) 6 5 6
LST GTES Part No. Size * D E F G H J K pprox. Wt. (lbs.) 5 9 6 5 56 96 Specifications repacking can be done in place Standard Materials of onstruction
WFER UTTERFLY VLVES 4 LIGNMENT HOLES MTH 125-150 L FLNGE DRILLING 8-7/8 11 4 LIGNMENT HOLES MTH 125-150 L FLNGE DRILLING 1-1/2 21 3-3/4 Specifications: Size () Part No. at. No. E DJUSTLE PKING NUT Valve L to ody End () D Valve L to Lever rm Exten. () E 6-1/4 45 45 D 3-1/4 Height (D) Outside Diamter (E) Weight lbs. 6 Nominal Size Size () Part No. at. No. Valve L to ody End () Valve L to Lever rm Exten. () Height (D) Outside Diameter (E) Weight lbs. FLNGE DPTERS Sizes 4" - 12" Illustration Sizes 14" - 20" Illustration Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter olt ircle Number of olt Holes 6 9 9 olt Hole Dia. Tube Neck Gauge
FLNGE DPTERS Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter olt ircle Number of olt Holes 5 05Q05 5 06Q05 6 06Q06 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 olt Hole Dia. Tube Neck Gauge
OMPNION FLNGES Type Type Type Long Neck Steel Ring Threaded (FPT) Tube or Pipe Size Tube or Pipe Size Schedule 40 Sleeve onnections Weld onnections Pipe Type "" Part No. Type "" Part No. Type "" Part No. Diameter (J) Thickness (K) Length (L) Outside Diameter () olt ircle () Number of olt Holes olt Hole Diameter F90015 RF90006 FLG90004 4 1/2 *3 9 7-1/2 8 3/4 F90022 RF90012 FLG90003 4-1/2 1/2 3 9 7-1/2 8 3/4 RF90097 5 1/2 3 10 8-1/2 8 7/8 F90014 RF90007 FLG90005 6 1/2 **3 11 9-1/2 8 7/8 F90023 RF90013 FLG90002 6-5/8 1/2 3 11 9-1/2 8 7/8 F90016 RF90004 FLG90006 8 1/2 **3 13-1/2 11-3/4 8 7/8 F90024 RF90017 N/ 8-5/8 1/2 3 13-1/2 11-3/4 8 7/8 F90013 RF90008 FLG90007 10 1/2 ***3 16 14-1/4 12 1 F90025 RF90060 N/ 10-3/4 1/2 3 16 14-1/4 12 1 F90026 RF90005 N/ 12 1/2 3 19 17 12 1 F90027 RF90061 N/ 12-3/4 1/2 3 19 17 12 1 F90028 RF90000 N/ 14 5/8 6-1/8 21 18-3/4 12 1-1/8 F90029 RF90040 N/ 16 5/8 6-1/8 23-1/2 21-1/4 16 1-1/8 F90030 RF90041 N/ 18 5/8 6-1/8 25 22-3/4 16 1-1/4 F90031 RF90081 N/ 20 3/4 6-1/4 27-1/2 25 20 1-1/4 F90032 RF90063 N/ 24 3/4 6-1/4 32 29-1/2 20 1-3/8
HEK VLVES Size ID Size ID Part No. EPDM Part No. EPDM Wafer Style - 125# lass Part No. Silicone Flanged Ends - 125# lass Part No. Silicone Standard Specs: Standard Specs: Size ID Part No. Silicone Male Pipe Thread Ends (MPT) Standard Specs:
FRITION LOSS HRT Step 1: Step 2: Step 3: lso:
Products & Services Industrially rated products offering effective solutions for air and gas handling problems: omplementary accessories with single source convenience and compatibility: panels UL, UL Listed and.e. ompliant omprehensive engineering and other customer support services: specialists in air and gas handling technology Worldwide organization of sales representatives and distributors offering: assistance For the name and telephone number of your local Spencer representative, call 800-232-4321 or email marketing@spencer-air.com lowers & Vacuum Systems with an Engineering Edge The Turbine ompany, 600 Day Hill Road, Windsor, T 06095-4706 TEL 800-232-4321 860-688-8361 Fax 860-688-0098 www.spencerturbine.com ulletin No. 600Q.1 opyright 2008 The Spencer Turbine ompany Printed in U.S.. 0908K