A/S J. PETERSENS BESLAGFABRIK

/S J. PETERSENS ESLGFRIK SYSTEM FITTINGS FOR OUTWRD OPENING WINDOWS ND DOORS 2017 - established 189 -

/S J. PETERSENS ESLGFRIK WOOD PROFILE FOR IP SYSTEM FITTINGS HINGES & FITTINGS FOR SIDE HUNG WINDOWS ND DOORS HINGES & FITTINGS FOR TOP HUNG WINDOWS SFETY TH & -RESTRITORS FOR IP SYSTEM FITTINGS D ESPGNOLETTE OLTS E ESSORIES FOR ESPGNOLETTE OLTS F FURTHER ESSORIES G MINTENNE H 1/11

FITTING INDEX INSTRUTIONS ccessories for Espagnolettes... Page F-10 ccessories for IP System Fittings... Page G-0 - G-04 ccessories for Mushroom Head olt Espagnolettes... Page F-09 ccessories for Roller olt Espagnolettes... Page F-08 ccessories for Side olt Espagnolettes... Page F-07 ccessories for Windows... Page G-05 - G-12 anopy Stays - djustable - with djustable Friction, IP No.s 2117-8, 78 & 88 Page -07 - -08 anopy Stays with Friction, IP No.s 21170-75 & 21179-82... Page -09 - -10 anopy Stays with Friction, IP No.s 21180-81 & 84... Page -15 - -1 anopy Stays - djustable - with Friction IP No. 2118-87 & 89... Page -1 - -14 onnection Pieces, IP No.s 2782-90... Page F-05 - F-0 Door Hinge, IP No.s 11195-99 & 11200-201... Page -0 - -04 Door Hinge - adjustable, IP No.s 12197-98... Page -07 - -08 Door Hinge - adjustable, IP No.s 12097-98... Page -19 - -20 Hinge for top mounting, IP No.s 11907-08 & 11924-25... Page -17 - -18 Espagnolettes with Mushroom Head olts, IP No.s 2051-0 & 201-70... Page E-01 - E-02 Espagnolettes with Mushroom Head olts, IP No.s 5021-0 & 5041-50... Page E-25 - E-2 Espagnolettes with Mushroom Head olts, IP No.s 051-0... Page E-27 - E-28 Espagnolettes with Roller olts, IP No.s. 2151-70... Page E-05 - E-0 Espagnolettes with Side olts, IP No.s 2701-10 & 2715-24... Page E-07 - E-08 Espagnolettes with Side olts, IP No.s 2745-54 & 270-9... Page E-09 - E-10 Espagnolettes with Side olts, IP No.s 2841-48... Page E-11 - E-12 Espagnolettes with Side olts for Patio Doors, IP No.s 2551-5... Page E-15 - E-1 Espagnolettes with Side olts, IP No.s 2141-48 & 2285-8... Page E-0 - E-04 Espagnolettes 2-Parts with Side olts for Patio Doors, IP No.s 241 & 242-7... Page E-17 - E-18 Espagnolettes 2-Parts with Side olts for Patio Doors, IP No.s 2481 & 2482-87... Page E-19 - E-20 Espagnolettes 2-Parts with Side olts for Patio Doors, IP No.s 2498 & 2482-87... Page E-21 - E-22 Espagnolettes for low positioning of Handle, IP No.s 211-4... Page E-2 - E-24 Extention Pieces, IP No.s 2580-97... Page F-11 - F-12 Fire Escape atch, IP No. 2115... Page D-12 Fire Escape Fitting, IP No. 2121... Page D-09 Friction Stay for Doors, adjustable, IP No.s 22411... Page G-02 Friction Stay for Doors, IP No.s 2820-2... Page F-0 - F-04 Friction Stay for Windows - djustable, IP No.s 2127... Page G-01 Friction Stay for Windows and Frame Fixtures, IP No.s 2810-18 & 2797-99... Page F-01 - F-02 Handles for Window Espagnolettes... Page F-14 Hinge for oupled Sash Windows with Sash ouplers, IP No.s 11717-18... Page -0 Hinges for Side Hung Windows, IP No.s 111-7, 1117-74 & 11177-79... Page -01 - -02 Hinge Positions - Suggestion... Page -0 IP Number Index... Page I-01 - I-04 17/11

INDEX Maintenance... Page H-01 - H-04 Number of Hinges - Suggestion... Page -05 Safety Restrictor, IP No. 21158... Page D-14 Safety Restrictor, IP No. 2110... Page D-01 - D-02 Safety Restrictors, IP No.s 2112-4... Page D-15 - D-1 Safety Restrictor, IP No. 21228... Page D-0 - D-04 Safety Restrictor, IP No. 2120... Page D-05 - D-0 Safety Restrictor, IP No. 2121... Page D-07 Safety Restrictor, IP No. 2122... Page D-17 - D-18 Safety Restrictor, IP No. 212... Page D-08 Safety Restrictor, IP No. 212... Page D-10 Safety Restrictor, IP No. 2129... Page D-19 - D-20 Shootbolts Extentions, IP No. 2780... Page F-1 Side Swing Windows 180, IP No.s 21281-8... Page -15 - -1 Side Swing Windows 180, IP No.s 21290-95... Page -1 - -14 Side Swing Window 90 0 with friction, IP No. 2119... Page -09 - -10 Side Swing Window 90 0 with friction, IP No.s 21194-95... Page -11 - -12 Support Fitting - djustable, IP No. 2122... Page D-11 Support Rail, IP No. 21227... Page D-0 - D-04 Top Hinge, IP No. 21125... Page -01 Top Hinge, IP No.s 21127-28... Page -02 Top swing fi tting, IP No.s 2104-52... Page -0 - -04 Top swing fi tting, IP No.s 21144-52... Page -05 - -0 Top swing fi tting, IP No.s 21874-82... Page -11 - -12 Ventilation atch, IP No. 21157... Page D-1 Wood Profile - Example... Page -0 - -04 17/11

MORE THN 140 YERS OF GENUINE RFTSMNSHIP FITTING INSTRUTIONS J. Petersens eslagfabrik /S - IP - represents more than 140 years of experience and expertise in developing and producing builders hardware and fi ttings. Founded in 189 in Nibe, a small town at the Limfjord in Northern Jutland of Denmark, IP has made the development from a small local locksmith based in the town center to a modern technology based industry with world wide business relations. IP is still owned by the founding families, and the topmanagers today are third and fourth generation of the founders. In a complex of modern buildings covering more than 25000 m 2 250 employees combine skills, tradition and respect for genuine craftsmansship. lot of emphasis is put on the environmental side. Good and healthy working conditions are key issues in everybodys daily working life. t IP such issues are put into focus. This is probably one of the reasons why life long employment so often is the case at IP. wide range of standard products as well as a fl exible production capacity enable IP to produce and sell products which comply with costumer s individual needs. IP - New factory with the new production facilities IP standard products as well as specially made items meet today s function and quality requirements. The quality management system which is awarded with a certifi cate of approval in accordance with the international DS/ISO 9001 ensures consistent quality. The standard product programme includes all kinds of fittings and builders hardware. From the smallest hobby fi ttings to large garage door fi ttings. From furniture fi ttings to gutter brackets. very important part of the IP product programme is the IP system fi ttings for the window and door manufacturing industry. The IP system fi ttings represent a genuine break through for fl exible productions of windows and doors. The system consists of a comprehensive range of fi ttings for windows and doors which all fi t into the same timber profile. y using the same timber profile for different types of windows, the window manufacturer will achieve a much more fl exible production. He will reduce manufacturing time, decrease stocking levels, and save on overall operating costs. NorthWest ir Photo of the new factory SouthWest ir Photo of both the old and the new factory 0/01

-01 IP SYSTEM FITTINGS OMPREHENSIVE RNGE OF FITTINGS FOR WINDOWS ND DOORS WHIH LL FIT INTO THE SME WOOD PROFILE. THE ORIGINL IP SYSTEM GROOVE 17, X GROOVE IN THE SSH 12 X 7 GROOVE IN THE FRME DEVELOPED Y IP MORE THN 0 YERS GO Y USING THE SME PROFILE FOR DIFFERENT TYPES OF WINDOWS YOU WILL HIEVE MORE FLEXILE PRODUTION - REDUE MNUFTURING TIME - DERESE STOKING LEVELS - ND SVE ON OVERLL OPERTING OSTS. 0/01

-02 FITTING INSTRUTIONS The IP SYSTEM FITTINGS represent a genuine break-through for fl exible production of windows and doors. The IP SYSTEM FITTINGS are precision made and developed through many years experience - and the development will continue. IP - /S J. Petersens eslagfabrik - has probably the largest and most efficient range of architectural ironmongery today. The following information is designed to assist window and door manufacturers in selecting the proper series of IP SYSTEM FITTINGS. IP SYSTEM for flexible production. It is important to study each fi tting instruction very carefully and position the fi ttings properly in the rebates which are 12x7 mm in the frame and 17,x mm in the sash. In this brochure you will fi nd all the IP SYSTEM articles with No s, descriptions, specifi cations of window escape opening as well as fi tting instructions. In case you might want supplementary information concerning the fi ttings mentioned above, we shall be pleased to be at your service. /S J. PETERSENS ESLGFRIK JO PETERSENSVEJ 9, DK-9240 NIE E-mail: ipa@ipafi ttings.com TEL: (+45) 98 5 15 00 FX: (+45) 98 5 22 00 www.ipafi ttings.com 0/01

-0 SYSTEM FITTINGS EXMPLE - WOOD PROFILE 49 22 12 15 7 2 17. 2 17. 7 49 0/01

-04 SYSTEM FITTINGS FITTING EXMPLE - WOOD INSTRUTIONS PROFILE 49 22 12 15 7 2 17. 2 17. 7 49 0/01

-05 SYSTEM FITTINGS SUGGESTION - NUMER OF HINGES The charts below show the number of hinges, we suggest to use on different sizes of windows and doors. The charts shall ONLY be considered as a guidance, as the number of hinges also will depend on the use and weight of the window/door. If the window/door is mounted in a public building with many users (Schools, Railway Stations etc.) then more or even larger hinges are recommended. lso we suggest to use a support fi tting whenever possible. WINDOW HINGES: Valid for the window hinges shown in this catalogue. SSH MESURES. ll window hinges meets the requirements of class 9 (0 Kgs.) in accordance with DS/EN 195. The numbers in brackets are number of hinges in windows with -layer glass. Width Height < 500 501-00 01-700 701-800 1401-1500 2 () () () (4) 101-1400 2 () () () (4) 1201-100 2 () () () (4) 1101-1200 2 () () () (4) 1001-1100 2 () () () () 901-1000 2 (2) 2 (2) 2 (2) () 801-900 2 (2) 2 (2) 2 (2) () 701-800 2 (2) 2 (2) 2 (2) () 01-700 2 (2) 2 (2) 2 (2) 501-00 2 (2) 2 (2) < 500 2 (2) DOORHINGES: Valid for door hinges shown in this catalogue. DOOR PLTE MESURES. ll door hinges with steel pin meets the requirements of class 1 (120 Kgs.) in accordance with DS/EN 195. The same hinges with brass pin meets the requirements of class 11 (80 Kgs.) in accordance with DS/EN 195 Width Height < 700 701-800 801-900 901-1000 1001-1100 2501-200 5 5 5 2401-2500 5 5 5 5 201-2400 4 4 4 5 5 2201-200 4 4 4 4 5 2101-2200 4 4 2001-2100 4 < 2000 4 1/05

-0 SYSTEM FITTINGS FITTING SUGGESTION INSTRUTIONS - HINGE POSITIONS 90 10 10 180 250 250 90 400 250 400 10 10 225 12/12

HINGES FOR SIDE HUNG WINDOWS IP NO.s 111-7, 1117-74 &11177-79 -01 MTERIL SURFE IP NO. STEEL FIXED STEEL PIN STEEL FIXED RSS PIN RSS FIXED S.S. PIN STINLESS STEEL SQURE EDGES LEFT SQURE EDGES RIGHT GLVNIZED/WHITE ELETROPLTED ELETROPL. SELET ELETROPL. YELLOW ELETROPL. GREY POLISHED UNMHINED GLVNIZED STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 100 PIEES. THIKNESS PLTE PIN SREW PPROX WEIGHT KG /EH 111 2 - - - 4 - - - - 4 - - 87-2 - - - 4 - - - - - - - 87-2 90 47 49,5 2,8 8 4,0 0,18 1117 2 - - - 4 - - - - 4 - - 87-2 90 50 52,5 2,8 8 4,0 0,22 2 - - - 4 - - - 25 4 - - - - 2 1117 2 - - - 4 - - - - - - - 87 1 2 - - - 4 - - - - - - - 87 1 2 70 7 9,5 2,5 8 4,0 0,1 - - - 4 0 21-25 - - - - 1-2 - - - 4 - - 2 - - - - - - 2 2 - - 4 - - - - - - - 87 1 2 - - - 4-21 - - - - - - - 2 11174 - - - 4 - - - 25 - - - - 1 2 90 7 9,5 2,5 8 4,0 0,17 - - - 4 0 - - - - - - - 1 - - - 7-4 - - - - - 85 - - 1 - - - - 8 4 - - - - - - 8-1 - 11177 - - - 4 - - - - - - - 87 1 2 - - - 4 0 - - - - - - - 1-90 7 9,5 2,5 8 4,0 0,19 11178 - - - 4 0 - - - - - - 87 1-90 7 9,5 2,5 8 4,0 0,19 11179 - - - 4 0 - - - - - - 87 1-90 0 0 2,5 8 4,0 0,1 111-7 + 1117-74 RIGHT HND 11177 RIGHT HND 11178 RIGHT HND 11179 RIGHT HND 1/0

-02 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 FRME SIDE 12 7 17. 2 SSH SIDE FIG. 1 FIG. 2 MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - GRESE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER GRESE MINIMUM TWIE YER. SEE LSO SETION H. 15/02

-0 DOOR HINGE IP N0.s 11195-99 & 11200-201 MTERIL SURFE IP NO. STEEL FIXED STEEL PIN STEEL FIXED RSS PIN RSS FIXED S.S. PIN STINLESS STEEL SQURE EDGES LEFT SQURE EDGES RIGHT ELETROPL./WHITE ELETROPLTED ELETROPL. SELET ELETROPL. YELLOW ELETROPL./GREY POLISHED UNMHINED GLVNIZED STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 50 PIEES INDUSTRY PKING PLLETS OF 700 PIEES D E THIKNESS PLTE PIN SREW PPROX WEIGHT KG /EH 11195 2 - - - 4 - - - - - - - 87 1 - - 120 9 1,5 12 17 4 9,5 5,0 0,5 2 - - - 4 - - - - 4 - - 87-2 - 11197 - - - 4 - - - 25 - - 1 - - 120 59 51,5 12 17 4 9,5 5,0 0,48 - - - 4 - - - - - - - 87 1 2-2 - - - 4-21 2-4 - - 87-2 - 2 - - - 4 - - - - - - - 87 1 - - - - - 4-21 - - - - - 87-2 - 11198 - - - 4 0 - - 25 - - - - 1 - - 120 49 41,5 12 17 4 9,5 5,0 0,4 - - 7-4 - - - - - 85 - - 1 - - - - - 8 4 - - - - - - 8-1 - - 2 - - - 4 - - - - - - - 87 - - 11199 - - - 4 0 - - - - - - 87 1 - - 120 49 41,5 12 17 4 9,5 5,0 0,50 11200 - - - 4 0 - - - - - - 87 1 - - 120 49 41,5 12 17 4 9,5 5,0 0,50 11201 - - - 4 - - - - - - - 87 1 - - 120 49 41,5 12 17 4 9,5 5,0 0,50 THREDED K PLTE IP NO. 12721 - SEE PGE G-0 E E E E D 11195+11197-98 RIGHT HND D 11199 RIGHT HND D 11200 RIGHT HND D 11201 RIGHT HND 17/05

-04 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 FRME SIDE 12 7 4. 17. 2 DOOR FIG. 1 FIG. 2 MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - GRESE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER GRESE MINIMUM TWIE YER. SEE LSO SETION H. 10/12

FITTING INSTRUTIONS -05

-0 HINGES FOR OUPLED SSH WINDOWS WITH SSH OUPLERS IP N0.s 11717-18 MTERIL SURFE IP NO. RIGHT HND 11717 4 87 1-90,5 9 2,5 8 4,0 0,20 11718 4 87 1 2 90,5 9 2,5 8 4,0 0,22 OUPLING HINGES IP NO.s 1241-4 - SEE PGE G-0. IP NO. 11718 IS WITH SPEIL FINILS FITTING INSTRUTIONS MIN. 5 28 SSH SIDE 12 7 STEEL FIXED RSS PIN SQURE EDGES LEFT SQURE EDGES RIGHT GLVNIZED STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 100 PIEES THIKNESS PLTE PIN SREW PPROX. WEIGHT KG/EH EXMPLE WOOD PROFILE 2 17. 2 FRME SIDE FRME SIDE MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - GRESE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER GRESE MINIMUM TWIE YER. SEE LSO SETION H. 12/01

-07 DOOR HINGE - DJUSTLE IP NO. 12197-98 MTERIL SURFE IP N0. STEEL FIXED PIN SQURE EDGES LEFT SQURE EDGES RIGHT ELETROPL. YELLOW GLVNIZED STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 50 PIEES D E PLTE PIN SREW PPROX. WEIGHT KG / PIEES 12197 2 4-87 - 2 120 59 51,5 12 17 4 9,5 5,0 0,52 2 4 25-1 - 12198 120 49 41,5 12 17 4 9,5 5,0 0,47 2 4-87 1 2 HORIZONTLLY ND VERTILLY DJUSTLE E D RIGHT HND 15/02

FITTING INSTRUTIONS TOP HINGE PRT DJUSTMENT PLTE OTTOM HINGE PRT FIG. 1 FITTING: 1. MOUNT THE DJUSTMENT PLTE IN THE GROOVE OF THE DOOR IN THE MIDDLE OF WHERE THE TOP HINGE PRT IS EING MOUNTED. 2. PLE THE TOP HINGE PRT OVER THE DJUSTMENT PLTE ND FSTEN IT. THE DJUSTMENT SREWS SHOULD E LOOSENED. EXMPLE WOOD PROFILE 49 28 FRME 12 4. DJUSTMENT: HORIZONTLLY: LOOSEN THE MOUNTING SREWS ND DJUST TO WNTED POSITION. FSTEN THE MOUNTING SREWS. VERTILLY: DJUST TO WNTED POSITION ON THE LRGE SREW IN THE OTTOM HINGE PRT - ±. MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. DOOR 17. FIG. 2 7 2 15/02

SIDE SWING WINDOW 90 0 WITH FRITION IP NO. 2119-09 ORDERING NR. MTERIL SURFE IP NR. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS SREW PPROX WEIGHT KG / SETS 2119 1 7 8 21 1 12 1 4,0 0,55 ONVINIENT FOR LENING SWINGS 90 OPENS LER FROM URTINS ND WINDOW FRME MX. VENTILTION ONELED FITTINGS FRITION IN LL POSITIONS DJUSTLE FRITION NODIZED LUMINIUM RILS ESY TO OPERTE ESY TO FIT ELETROPLTED STEEL PRTS OTTOM FITTING TOP FITTING 1 SET LEFT HND FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 15/02

-10 FITTING INSTRUTIONS EXMPLE WOOD PROFILE TOP FRME 49 28 IMPORTNT: WHEN FITTING/MOUNTING THE WINDOW IT IS NEESSRY THT THE TOP ND OTTOM FRMES RE STRIGHT. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. OTTOM FRME OTTOM SSH MIN. 18 17. 12 17. TOP SSH 49 28 FIG. 1 VERTIL PLN 12 7 LTERNTIVE PROFILE MX. 7 SIDE FRME ND SIDE SSH MUST HVE THE SME PROFILE S TOP FRME ND TOP SSH. 2 7 FIG. 2 HORIZONTL PLN FIG. HINGE SIDE FITTING SHOWN ON OTTOM ILL RIGHT HND ILLUSTRTION IP NO. 2119 MX. WEIGHT OF SSH KG 40 MIN. WIDTH OF SSH 20 MX. WIDTH OF SSH 820 USE SREW NO. 4.0 REG. TLL WINDOWS: FOR TLL ND NRROW SSHES PLESE NOTE THT THE TOP ND OTTOM SLIDING ELEMENTS MY NOT MOVE EXTLY LIKE, EUSE OF THE DISTNE ETWEEN THE TWO ELEMENTS. THIS MY MKE THE MOVE- MENT OF THE SSH LITTLE MORE DIFFIULT. EVT. USE OTH HNDS. FITTING: 1. FIT THE LUMINIUM RILS INTO TOP ND OTTOM FRME SO THT THE OTTOM RIL IS PLED GINST THE FRME ON THE HINGE SIDE. FSTEN THE SREWS (FIGURE 1 ND 2). 2. INSERT SSH INTO POSITION OF THE STEERING KNUKLE RMS - GUIDED Y THE SSH GROOVE. FSTEN THE SREWS.. NOW THE FRITION N E DJUSTED Y MENS OF THE NYLON SREW ON THE TOP FITTING. MINTENNE: DO NOT PINT THE LUMINIUM RILS. WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 1/05

SIDE SWING WINDOW 90 0 WITH FRITION IP NO. 21194-95 -11 ORDERING NR. MTERIL SURFE IP NR. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS SREW PPROX WEIGHT KG / SETS 21194 1 7 8 21 1 12 40 157 4,0 0,28 21195 1 7 8 21 1 12 40 1 4,0 0,55 ONVENIENT FOR LENING SWINGS 90 OPENS LER FROM URTINS ND WINDOW FRME MX. VENTILTION ESY TO OPERTE ESY TO FIT ONELED FITTINGS FRITION IN LL POSITIONS DJUSTLE FRITION NODIZED LUMINIUM RILS ELETROPLTED STEEL PRTS TOP FITTING OTTOM FITTING 1 SET RIGHT HND ILLUSTRTION FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 15/12

-12 FITTING INSTRUTIONS EXMPLE WOOD PROFILE FRME RETE 28 IMPORTNT: WHEN MNUFTURING THE WINDOW ND MOUNTING THE FITTINGS THE SLIDING SHOES NEED TO E IN ENTER POSITION IN THE LUMINIMUM PROFILE, THIS ENLES THE WOOD TO WORK. WHEN MOUNTING THE WINDOW THE TOP ND OTTOM FRME SHOULD E PRLLEL. THIS IS NEESRRY, IN ORDER TO LET THE SLIDING SHOES GLIDE WITHOUT FRITION IN THE LUMINIUM PROFILE. -DIM. OTTOM FRME TOP FRME OTTOM SSH MIN. 18 18 17. TOP SSH 17. 4 12 28 7 2 7 18 FIG. 2 HORIZONTL PLN FITTING SHOWN ON FRME ILL RIGHT HND ILLUSTRTION HINGE SIDE FIG. 1 MIN. WIDTH OF SSH 150 20 VERTIL PLN MX. WIDTH OF SSH 20 820 FRME SIDE ND SSH SIDE NEED TO HVE THE SME PROFILE S TOP FRME USE SREW NO. 4.0 4.0 ND TOP SSH. FIG. 4 FITTING: 1. THE FITTING SHOULD E POSITIONED IN THE GROOVES T HED ND ILL OF FRME ND SREWED ON (FIGURE 1 ND 2) 2. NOW PUSH THE WINDOW SSH INTO POSITION Y SSH SLOTS ND FSTEN THE SREWS. 2 17. 9 REG. TLL WINDOWS: FOR TLL ND NRROW SSHES PLESE NOTE THT THE TOP ND OTTOM SLIDING ELEMENTS MY NOT MOVE EXTLY LIKE, EUSE OF THE DISTNE ETWEEN THE TWO ELEMENTS. THIS MY MKE THE MOVE- MENT OF THE SSH LITTLE MORE DIFFIULT. EVT. USE OTH HNDS. EXTR UT OUT IN SSH FROM UNDERNETH. THE SLOT ROUTE-RED OUT MUST HVE WIDTH OF 22 X 9 ND DEPTH OF.. NOW THE FRITION N E DJUSTED Y MENS OF THE NYLON SREW ON THE TOP FITTING. IF LRGER OPENING NGEL IS WNTED THEN MOVE THE DJUSTLE STOP FITTING IN THE TOP FRME LUMINIUM RIL. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME.WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 22 R 10 FRME RETE -DIM. 4.5 50.0 54 5.5 FIG. IP N0. 21194 21195 MX. WEIGHT OF SSH KGS 20 40 1/05

-1 SIDE SWING WINDOW 180 0 IP N0.s 21290-95 MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS MODULE FRME DIMENSION INSIDE STEEL PRTS SREW PPROX WEIGHT KG /SET 21290 1 7 8 21 1 4 204-4 1 X 4,5 & 4,0 0,50 21291 1 7 8 21 1 4 44 47-44 1 X 4,5 & 4,0 0,2 21292 1 7 8 21 1 5 54 447-54 1 X 4,5 & 4,0 0,74 2129 1 7 8 21 1 4 547-4 1 X 4,5 & 4,0 0,8 21294 1 7 8 21 1 7 74 47-74 1 X 4,5 & 4,0 0,98 21295 1 7 8 21 1 8 84 747-84 1 X 4,5 & 4,0 1,10 ONVENIENT FOR LENING FULLY REVERSILE 180 0 OPENS LER OF URTINS ND WINDOW FRMES MX. VENTILTION ONELED FITTINGS NODIZED LUMINIUM RILS TOP FITTING OTTOM FITTING FIRE-ESPE OPENING: 00 FROM MODULE 8 1 SET RIGHT HND 1/11

-14 FITTING INSTRUTIONS IMPORTNT: WHEN FITTING/MOUNTING THE WINDOW IT IS NEESSRY THT THE TOP ND OTTOM FRMES RE STRIGHT. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. SIDE FRME EXMPLE WOOD PROFILE FIG. 2 SHOWN WITH SUPPORT FITTING HORIZONTL PLN FITTING: 1. UT OFF THE ENDS OF LUMINIUM RILS - IF NEESSRY - UT OFF MUST E MDE IN THE END OPPOSITE THE HINGE SIDE. 2. SSEMLE SLIDE RS ND SLIDE LOKS.. FIT THE LUMINIUM RILS INTO TOP ND OTTOM FRME SO THT THE OTTOM RIL IS PLED GINST THE FRME ON THE HINGE SIDE. SHOWN IN FIG.. THEN MOUNT THE FRME RKETS INTO GROOVES OF THE SIDE FRMES ND FSTEN THE SREWS. 4. INSERT SSH INTO POSITION OF THE STEERING KNUKLE RMS - GUIDED Y THE SSH GROOVE. FSTEN THE SREWS. 5. FIT THE ERING LOK (PLSTI) INTO THE GROOVE OF THE OTTOM SSH - PPROX. IN THE MIDDLE OF THE FREE PRT OF THE GROOVE. FSTEN THE SREWS.. THE SUPPORT FITTING IS FITTED IN THE MIDDLE OF THE SIDE SSH IN THE HINGE SIDE. SEE FIG. 2. IP NO. MODULE MIN. R 17, SIDE SSH 12 INSIDE FRME FIG. 7,5 LENGHT OF FITTINGS -DIM. TOP FRME 12 MIN. 17. TOP SSH OTTOM SSH 17, 18 OTTOM FRME MIN. FIG. 1 VERTIL PLN MX. WEIGHT KG 21290 204-4 4 40 21291 4 47-44 44 40 21292 5 447-54 54 40 2129 547-4 4 40 21294 7 47-74 74 40 21295 8 747-84 84 40 7 7 2 FIG. FIG. 4 THE DIMENSIONS INDITED IN FIG. 4 MEN THT THE WETHERSTRIP MUST E MOUNTED ON THE SSH FRME RETE -DIM. 4.5 FIG. 5 HINGE SIDE FITTING SHOWN ON OTTOM ILL RIGHT HND ILLUSTRTION NO..5 SREWS RE USED FOR TOP LU-RIL OTHERWISE SREWS NO. 4.0. REG. TLL WINDOWS: FOR TLL ND NRROW SSHES PLESE NOTE THT THE TOP ND OTTOM SLIDING ELEMENTS MY NOT MOVE EXTLY LIKE, EUSE OF THE DISTNE ETWEEN THE TWO ELEMENTS. THIS MY MKE THE MOVE- MENT OF THE SSH LITTLE MORE DIFFIULT. EVT. USE OTH HNDS. MINTENNE: DO NOT PINT THE LUMINIUM RILS. WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. MIN. 28.0 49.0 27.5 48.0 27.0 47.0 2.5 4.0 50.0 54 5.5 1/05

-15 SIDE SWING WINDOW 180 0 IP N0.s 21281-8 MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS MODULE FRME DIMENSION INSIDE STEEL PRTS SREW PPROX WEIGHT KG /SET 21281 1 7 8 21 1 42 204-1 1 X 4,5 & 4,0 0,50 21282 1 7 8 21 1 4 442 2-41 1 X 4,5 & 4,0 0,2 2128 1 7 8 21 1 5 542 42-51 1 X 4,5 & 4,0 0,74 21284 1 7 8 21 1 42 52-1 1 X 4,5 & 4,0 0,8 21285 1 7 8 21 1 7 742 2-71 1 X 4,5 & 4,0 0,98 2128 1 7 8 21 1 8 842 72-81 1 X 4,5 & 4,0 1,10 ONVENIENT FOR LENING FULLY REVERSILE 180 0 OTTOM FITTING OPENS LER OF URTINS ND WINDOW FRMES MX. VENTILTION ONELED FITTINGS NODIZED LUMINIUM RILS FIRE-ESPE OPENING: 00 FROM MODULE 8 TOP FITTING 1 SET RIGHT HND 1/11

-1 IMPORTNT: WHEN FITTING/MOUNTING THE WINDOW IT IS NEESSRY THT THE TOP ND OTTOM FRMES RE STRIGHT. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. SIDE FRME FITTING INSTRUTIONS MIN. 17. SIDE SSH 12 7 FIG. 2 SHOWN WITH SUPPORT FITTING HORIZONTL PLN FITTING: 1. UT OFF THE ENDS OF LUMINIUM RILS - IF NEESSRY - UT OFF MUST E MDE IN THE END OPPOSITE THE HINGE SIDE. 2. SSEMLE SLIDE RS ND SLIDE LOKS.. FIT THE LUMINIUM RILS INTO TOP ND OTTOM FRME SO THT THE OTTOM RIL IS PLED GINST THE FRME ON THE HINGE SIDE. SHOWN IN FIG.. THEN MOUNT THE FRME RKETS INTO GROOVES OF THE SIDE FRMES ND FSTEN THE SREWS. 4. INSERT SSH INTO POSITION OF THE STEERING KNUKLE RMS - GUIDED Y THE SSH GROOVE. FSTEN THE SREWS. 5. FIT THE ERING LOK (PLSTI) INTO THE GROOVE OF THE OTTOM SSH - OPPOSITE THE HINGE SIDE. FSTEN THE SREW.. THE SUPPORT FITTING IS FITTED IN THE MIDDLE OF THE SIDE SSH IN THE HINGE SIDE. SEE FIG. 2. IP NO. MODULE R TOP SSH 2 INSIDE FRME EXMPLE WOOD PROFILE LENGHT OF FITTINGS TOP FRME 2128 8 72-81 842 40 FIG. SSH - SEEN FROM RIGHT MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 1/05 17. OTTOM SSH 17, 12 12 MIN. OTTOM FRME SSH SEEN FROM OVE (RIGHT) MX. WEIGHT KG 21281 204-1 42 40 21282 4 2-41 442 40 2128 5 42-51 542 40 21284 52-1 42 40 21285 7 2-71 742 40 MIN. 7 SSH 2 7 25.5 17 17 THE DIMENSIONS INDITED IN FIG. 4 MEN THT THE WETHERSTRIP MUST E MOUNTED ON THE SSH FIG. 5 17, 1 FIG. 4 UT-OUT FOR FITTING ON HINGE SIDE OF TOP SSH 17, 17 MIN. 28.0 49.0 27.5 48.0 27.0 47.0 HINGE SIDE FITTING SHOWN ON OTTOM ILL RIGHT HND ILLUSTRTION REG. TLL WINDOWS: FOR TLL ND NRROW SSHES PLESE NOTE THT THE TOP ND OTTOM SLIDING ELEMENTS MY NOT MOVE EXTLY LIKE, EUSE OF THE DISTNE ETWEEN THE TWO ELEMENTS. THIS MY MKE THE MOVEMENT OF THE SSH LITTLE MORE DIFFIULT. EVT. USE OTH HNDS.

-17 HINGES FOR TOP MOUNTING IP N0.s 11907-08 &11924-25 LEFT IP NO. MTERIL STEEL LEFT RIGHT ELETROPL. / GREY SURFE ELETROPL. / WHITE GLVNIZED STNDRD PKING IN OXES OF 10 PIEES THIKNESS PLTE SREW PPROX WEIGHT KG / EH 11907 1 7 8 4 87 1 80 51,5 2,5 4,5 0,11 11908 1 7 8 4 87 1 80 41,5 2,5 4,5 0,10 11924 1 7 8 - - 87 1 80,5 51 2,5 4,5 0,11 11925 1 7 8 - - 87 1 80,5 7,5 2,5 4,5 0,09 IP NO. 11907: USED IN ONJUNTION WITH DOOR HINGE IP NO. 11197. IP N0. 11908: USED IN ONJUNTION WITH DOOR HINGE IP NO. 11198. IP NO. 11924: USED IN ONJUNTION WITH WINDOW HINGE IP NO. 1117. IP N0. 11925: USED IN ONJUNTION WITH WINDOW HINGE IP NO. 11174. 1/0

-18 FITTING INSTRUTIONS FIG. 1 FIG. 2 IP NO. 11907-08 + 11924-25 IS MOUNTED ON HINGE SIDE ON TOP SSH ND TOP FRME S SHOWN ON FIG. 1 ND FIG. 2 MINTENNE: DO NOT PINT THE FITTING. WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/12

-19 DOOR HINGE - DJUSTLE IP NO.s 12097-98 MTERIL SURFE IP N0. STEEL FIXED PIN SQURE EDGES LEFT SQURE EDGES RIGHT ELETROPL. / GREY GLVNIZED INDUSTRY PKING IN OXES OF 50 PIEES D E PLTE PIN SREW PPROX. WEIGHT KG / PIEES 12097 2 4 4-2 120 59 51,5 12 17 4 9,5 5,0 0,50 12098 2 4 4 87 2 120 49 41,5 12 17 4 9,5 5,0 0,45 VERTILLY DJUSTLE E D RIGHT HND 15/12

-20 FITTING INSTRUTIONS DJUSTMENT SREW FIG. 1 EXMPLE WOOD PROFILE 49 28 DJUSTMENT: VERTILLY: DJUST TO WNTED POSITION ON THE LRGE SREW IN THE OTTOM HINGE PRT - ±. FRME 12 7 4. MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SE LSO SETON H. 17. DOOR 2 FIG. 2 15/02

-01 TOP HINGE IP N0. 21125 MTERIL SURFE 1/2 SET IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED YELLOW GLVNIZED STNDRD PKING IN OXES OF 10 SETS 21125 1 0 25 87 1 8 2 40 2,5 4,0 0,1 THIKNESS PLTE SREW PPROX. WEIGHT KG / SET FIRE-ESPE OPENING: 500 FROM MODULE 7 00 FROM MODULE 8 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 MX. SSH WEIGHT: 40 KGS FIG. FITTINGS ON FRME SIDE FRME SIDE 12 7 FITTING IS PLED GINST TOP FRME 17. 2 SSH SIDE FITTING ON SSH SIDE FIG. 1 MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - GRESE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TI- VTING REPETEDLY. HEREFTER GRESE MINIMUM TWIE YER. SEE LSO SETION H. FIG. 2 FIG 4 25 0/01

-02 TOP HINGE IP N0. 21127-28 1/2 SET IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELETROPL. YELLOW GLVNIZED STNDRD PKING IN OXES OF 10 SETS INDUSTRY PKING IN OXES OF 100 SETS THIKNESS PLTE SREW PPROX. WEIGHT KG / SET 1 0 25-1 - 21127 79 2,5 4,0 0,17 1 0-87 1 2 21128 1 0-87 - 2 79 2,5 4,0 0,17 ONELED FITTINGS IP NR. 21128 W/SEURITY PIN FIRE-ESPE OPENING: 500 FROM MODULE 7 00 FROM MODULE 8 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 7 IP NO. 21127 IP NO. 21128 17. 12 7 2 20 FITTINGS ON FRME FIG. 1 MOUNTING STOP FIG. MX. 22 MX. 22 FIG 4 MX. SSH WEIGHT: 50 KGS FRME SIDE SSH SIDE FIG. 2 FITTINGS ON SSH FIG. 5 FIG. MINTENNE: TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - GRESE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER GRESE MINIMUM TWIE YER. SEE LSO SETION H. 1/05

TOP SWING FITTING WOOD/LU IP N0.s 2104-52 -0 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 1 SET MODULE FRME DIMENSION INSIDE SREW PPROX WEIGHT KG /SET 2104 1 0 21 1 8 18 71 71-812,5 & 4,0 1,5 21047 1 0 21 1 9 18 81 81-912,5 & 4,0 1,7 21048 1 0 21 1 10 18 91 91-1012,5 & 4,0 1,9 21049 1 0 21 1 11 18 101 101-1112,5 & 4,0 2,1 21050 1 0 21 1 12 18 111 111-1212,5 & 4,0 2, 21051 1 0 21 1 1 18 121 121-112,5 & 4,0 2,5 21052 1 0 21 1 14 18 11 11-1412,5 & 4,0 2,7 ONELED FITTINGS FULLY REVERSILE 170 OPENS LER OF URTINS ND WINDOW FRME MUSHROOM HED ESPGNOLETTE IP NO.s 2051-70, ROLLER OLT ESPGNOLETTE IP NO.s 2151-70 ND SIDE OLT ESPGNOLETTE IP NO.s 2701-9 N E USED NODIZED RILS FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE RESTRITORS, SEE SETION D 1/2 SET 1/11

-04 FITTING INSTRUTIONS IMPORTNT: THE SIDE FRMES MUST E STRIGHT TO THE EFFET THT THE DISTNE ETWEEN THE SIDE FRMES (SLIDING RILS) IS EXTLY THE SME FOR NY HEIGHT OF THE FRME. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. IP NO. 21158 IP NO. MODULE TOP FRME TOP SSH EXMPLE WOOD PROFILE FITTING ON FRME FIG. 1 SSH SEURITY POSITION OTTOM SSH PRT FIG. 4 THE DIMENSIONS INDITED IN FIGURE 4 MEN THT THE WETHERSTRIP MUST E MOUNTED ON THE SSH. INSIDE FRME 12 17. FIG. 2 2 8 LENGHT OF FITTINGS SIDE SSH SIDE FRME FITTING: 1. PLE THE FITTING INTO OTH SIDES OF THE FRME. 2. POSITION LUMINIUM RIL GINST TOP FRME. USE SREW NO..5.. PLE THE ERING PLTE GINST THE TOP ND GINST THE LUMINIUM RIL. USE SREW NO. 4.0. 4. INSERT THE SSH ETWEEN HINGE RMS ND PUSH THE SSH GINST THE STOP RKET. FSTEN THE SSH WITH SREWS NO. 4.0. STRTING WITH THE SREW IN THE STOP RKET. 5. FIT THE RESTRITOR IP NO. 21158 ON THE LEFT SIDE - SEE FIG. 1.. FOR SEURITY RESONS, MKE SURE THT THE FIRST NOTH IS LWYS USED IN LENING POSITION, SEE FIG. 1. OPERTING INSTRUTIONS: 1. OPEN THE WINDOW - THE RESTRITOR WILL UTOMTILLY RESTRIT THE WINDOW. 21049 11 101-1112 101 0 2. PULL THE SSH 20 - PRESS THE RE- 21050 12 111-1212 111 0 STRITOR IN THE DIRETION OF THE RROW ND OPEN THE WINDOW. SEE 21051 21052 1 14 121-112 11-1412 121 11 0 0 FIG. 1.. WHEN THE WINDOW IS REVERSED FOR USE THE LRGEST POSSILE FITTING LENING - THE MEHNISM WILL LOK UTOMTILLY. DISENGGE S MENTIO- MINTENNE: NED IN POINT 2. DO NOT PINT THE FITTING. WHEN FITTING - LURITE THE MOVLE METL PRTS OFTHE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 2 7 MX. WEIGHT KG 2104 8 71-812 71 0 21047 9 81-912 81 45 21048 10 91-1012 91 0 MIN. 28.0 49.0 27.5 48.0 27.0 47.0 UT OUT FOR SSH PRT 8 17. MIN. 8 7 8-9 FIG. 12 17/01

-05 TOP SWING FITTING IP N0.s 21144-52 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ONELED FITTINGS FULLY REVERSILE 170 0 OPENS LER OF URTINS ND WINDOW FRME MUSHROOM HED ESPGNOLETTE IP NO.s 2051-70, ROLLER OLT ESPGNOLETTE IP NO.s 2151-70 ND SIDE OLT ESPGNOLETTE IP NO.s 2701-9 N E USED NODIZED RILS ELETROPLTED STNDRD PKING IN OXES OF 1 SET MODULE FRME DIMENSION INSIDE SREW PPROX WEIGHT KG /SET 21144 1 0 21 1 18 51 51-12,5 & 4,0 1,1 21145 1 0 21 1 7 18 1 1-712,5 & 4,0 1, 2114 1 0 21 1 8 18 71 71-812,5 & 4,0 1,5 21147 1 0 21 1 9 18 81 81-912,5 & 4,0 1,7 21148 1 0 21 1 10 18 91 91-1012,5 & 4,0 1,9 21149 1 0 21 1 11 18 101 101-1112,5 & 4,0 2,1 21150 1 0 21 1 12 18 111 111-1212,5 & 4,0 2, 21151 1 0 21 1 1 18 121 121-112,5 & 4,0 2,5 21152 1 0 21 1 14 18 11 11-1412,5 & 4,0 2,7 FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE RESTRITORS, SEE SETION D 1/2 SET 15/02

-0 IMPORTNT: FOR THE FITTING OF NY WINDOW OF SIZE LRGER THN M 10 T LEST THREE FIXING POINTS (EXPNSION OLTS) RE REQUIRED FOR EH SIDE FRME. THE SIDE FRMES MUST E STRIGHT TO THE EFFET THT THE DISTNE ETWEEN THE SIDE FRMES (SLIDING RILS) IS EXTLY THE SME FOR NY HEIGHT OF THE FRME. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. IP N0. 21158 FITTING INSTRUTIONS 17. THE DIMENSIONS INDITED IN FIGURE 4 MEN THT THE WETHERSTRIP MUST E MOUNTED ON THE SSH IP NO. FIG. 1 FITTING ON FRME MODULE SEURITY POSITION TOP FRME FIG. 5 INSIDE FRME TOP SSH FIG. 4 MIN. 28.0 49.0 27.5 48.0 27.0 47.0 LENGHT OF FITTINGS 12 FIG. 2 7 SSH MX. WEIGHT KG 21144 51-12 51 0 21145 7 1-712 1 45 2114 8 71-812 71 0 21147 9 81-912 81 0 21148 10 91-1012 91 0 21149 11 101-1112 101 0 21150 12 111-1212 111 0 21151 1 121-112 121 0 21152 14 11-1412 11 0 USE THE LRGEST POSSILE FITTING EXMPLE WOOD PROFILE 2 SSH SIDE FIG. 17. FRME SIDE 12 7 8-9 FITTING: 1. PLE THE FITTING INTO OTH SIDES OF THE FRME. 2. POSITION FITTING GINST TOP FRME. USE SREWS NO.,5.. PLE THE ERING PLTE GINST THE TOP ND GINST THE LUMINIUM RIL. USE SREWS NO. 4,0 4. INSERT THE SSH ETWEEN HINGE RMS ND PUSH THE SSH GINST THE STOP RKET. FSTEN THE SSH WITH SREWS NO. 4,0, STRTING WITH THE SREW IN THE STOP RKET. 5. FIT THE RESTRITOR IP NO. 21158 ON THE LEFT SIDE - SEE FIG. 1.. FOR SEURITY RESONS. MKE SURE THT THE FIRST NOTH IS LWYS USED IN LENING POSITION, SEE FIG. 5 OPERTION INSTRUTIONS: 1. OPEN THE WINDOW - THE RESTRITOR WILL UTOMTILLY RESTRIT THE WINDOW. 2. PULL THE SSH 20 - PRESS THE RESTRITOR IN THE DIRETION OF THE RROW ND OPEN THE WINDOW, SEE FIG. 1.. WHEN THE WINDOW IS REVERSED FOR LENING, THE MEHNISM WILL LOK UTOMTILLY. DISENGGE S MENTIO- NED IN POINT 2. MINTENNE: THE FITTINGS RE NOT TO E PINTED. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT GRESE THE LUMINIUM RILS. TEST THE OPERTION FROM TIME TO TIME. SEE LSO SETION H. MIN. 8 17/09

DJUSTLE NOPY STYS WITH DJUSTLE FRITION IP NO.s 2117-8, 78 & 88-07 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 5 SETS INDUSTRY PKING IN OXES OF 25 SETS SREW PPROX WEIGHT KG /SET 2117 1 0 21 1-12 47 4,0 0,55 2118 1 0 21 1-12 48 4,0 0,59 21178 1 0 21-2 12 51 4,0 0,0 21188 1 0 21-2 12 504 4,0 0,59 ONELED FITTINGS DJUSTLE FRITION FRITION IN LL POSITIONS NODIZED LUMINIUM RILS IP NO. 21188 IS VERTILLY DJUSTLE ± 1.5 ESY TO MOUNT 2117 2118+88 IP NR. 21188 21178 2117-8 + 88 21178 FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 1/11

-08 FITTING INSTRUTIONS 49 HORIZONTL PLN EXMPLE WOOD PROFILE 28 SIDE FRME/ TOP FRME 12 7 2 17. SIDE SSH/ TOP SSH FIG. 2 FIG. 1 FITTING: 1. LOSE THE FITTING ND PLE IT IN THE GROOVE OF THE SIDE FRME. 2117: PLE THE FITTING UP GINST THE TOP FRME (IF GROOVE HS EEN MDE IN THE TOP FRME - S SHOWN IN FIG. 1 - DO NOT PLE THE FITTING GINST THE OTTOM OF THE GROOVE ONLY TO THE EDGE OF THE GROOVE). 2118,78 & 88: PLE THE FITTING UP GINST THE OTTOM OF THE GROOVE IN THE TOP FRME. PLE ND FSTEN THE SREWS IN THE OTTOM HOLES OF THE FITTING. OPEN THE FITTING ND FSTEN THE REMINING SREWS. 2. PUSH THE SSH INTO ITS PLE Y INSERTING IT ETWEEN THE FITTINGS GUIDED Y THE GROOVES IN THE SSH, PUSH UNTIL THE SSH HITS THE UPPER PRT OF THE FITTING. THIS WILL GURNTEE GP ETWEEN FRME ND SSH. FSTEN THE SREWS, STRT WITH THE 2 SREWS IN THE TOP SSH. 2117: WHEN THE TOP SSH IS MDE WITH GROOVE ORDING TO FIG. 1 USE THE 2 DISTNE PIEES IN OTH ENDS OF THE UPPER SSH GROOVE. DEPENDING ON THE QULITY OF THE FRME MTERIL ND THE FSTENING POSSIILITIES OF THE FITTING ON HEVY WINDOWS (-LYER GLSS) MINOR DROP OF THE SSH MY OUR. IN SUH SES WE REOEND USING IP NO. 21178, WHIH HS EXTR FSTENING POINTS. IP NO. 2117 2118 21178 21188 MX. SSH WEIGHT KG 70 70 70 70 MX. INSIDE FRME HEIGHT 144 144 144 144 USE SREW NO. 4.0 4.0 4.0 4.0. NOW THE FRITION MY E DJUSTED Y MENS OF THE NYLON SREWS IN THE LUMINIUM RILS. EFORE DJUSTMENT, PRESS THE SLIDING PRT DOWN TO THE STOPS. THE EST RESULT FOR THE WINDOW MOVEMENT IS HIEVED Y EQUL FRITION T EITHER SIDE. 4. 21188: THE SSH N E DJUSTED ±1.5 UP OR DOWN. EFORE DJUSTING THE SSH THE OTTOM MOUNTING SREW IN EITHER SIDE OF THE FIT- TING SHLL E LOOSENED. THE SSH N NOW E DJUSTED Y MENS OF TORX20 KEY Y TURNING THE EENTRI SREW. ON THE SREW IS MRK. WHEN IT IS LEVEL IT INDITES NEUTRL POSITION. WHEN THE MRK IS VERTIL IN TOP OR OTTOM THE DJUSTMENT IS T ITS MXIMUM ±1.5. FTER DJUSTMENT THE OTTOM MOUNTING SREWS MUST E FSTENED GIN. MINTENNE: DO NOT PINT THE LUMINIUM RILS. WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. EENTRI SREW MRK IP NO. 21188 FIG. 15/02

-09 NOPY STYS WITH FRITION IP NO.s 21170-75 & 21179-82 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 5 SETS INDUSTRY PKING IN OXES OF 25 SETS SREW PPROX WEIGHT KG /SET 1/2 SET 21170 1 0 21 1 2 12 2 4,0 0,4 2117 1 0 21 1 2 12 45 4,0 0,0 21174 1 0 21 1-12 711 4,0 0,78 21175 1 0 21 1-12 10 4,0 0,27 21179 1 0 21 1-12 250 4,0 0,40 21182 1 0 21 1-12 440 4,0 0,50 ONELED FITTINGS DJUSTLE FRITION FRITION IN LL POSITIONS NODIZED LUMINIUM RILS FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 21170+7+74 21175 21179+82 1/11

-10 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 HORIZONTL PLN SIDE FRME/ TOP FRME 12 7 2 17. SIDE SSH/ TOP SSH FIG. 1 FIG. 2 IP NO. 21170 & 79 2117 & 82 21174 21175 MX. SSH WEIGHT KG 40 50 70 20 MX. INSIDE FRME HEIGHT 844 144 1544 10 USE SREW NO. 4.0 4.0 4.0 4.0 FIG. FITTING: 1. 21170-75: SIDE SSH & - FRME ND TOP SSH & -FRME RE MDE WITH THROUGH-GOING GROOVES, SEE FIGURE 1. 21179-82: SIDE SSH & - FRME RE MDE WITH THROUGH-GOING GROOVES, SEE FIGURE 1. 2. LOSE THE FITTING ND PLE IT IN THE GROOVE OF THE SIDE FRME. 21170-75: PLE THE FITTING GINST THE OTTOM OF THE GROOVE IN THE TOP FRME. 21179-82: PLE THE FITTING GINST THE TOP FRME. PLE ND FSTEN THE SREW IN THE OTTOM HOLE OF THE FITTING. OPEN THE FITTING ND FSTEN THE REMINING SREWS. 2117: MOUNT THE STOP PLTE THROUGH THE TOP SREWHOLE IN THE STOP PLTE IN ORDER TO OTIN THE LRGEST FIRE-ESPE OPENING. IF THE OTTOM SREWHOLE IS USED THEN THE FITTING WILL RRY MX. SSH WEIGHT OF 0 KGS., UT THE FIRE-ESPE OPENING WILL E REDUED. 21174: MOUNT THE STOP PLTE THROUGH THE TOP SREWHOLE UNDER THE FRITION ELEMENT TO OTIN MXIMUM FIRE-ESPE OPENING. IF ONE OF THE OTHER SREWHOLES RE USED THEN THE FIRE-ESPE OPENING WILL E REDUED, UT THE MX. SSH WEIGHT WILL THEN E: ENTER HOLE: 85 KGS - OTTOM HOLE: 100 KGS.. PUSH THE SSH INTO ITS PLE Y INSERTING IT ETWEEN THE FITTINGS, GUIDED Y THE GROOVES IN THE SSH, TILL THE SSH HITS THE STOPS OF THE FITTING. THESE STOPS WILL GURNTEE G ETWEEN FRME ND SSH. FSTEN THE SREWS, EGINNING WITH THE ONES IN THE TOP RKETS (IP NO.S 21170-74, 21179 & 21182) 21179-82: IF THE TOP SSH IS MDE WITH GROOVE, FIG. 1, FIRST PLE THE SMLL MOUNTING RKETS IN EH SIDE UNDER TOP RKET OF THE FITTING EFORE FSTEN THE SREWS. 4. NOW THE FRITION MY E DJUSTED Y MENS OF THE NYLON SREWS IN THE SLIDING ELEMENTS. THE EST RESULT FOR THE WINDOW MOVEMENT IS HIEVED Y EQUL FRITION T EITHER SIDE. OS! RE. IP NO. 2117+21182 FOR IG WINDOWS (>1200 ) WITH -LYER GLSS ND NO REQUIREMENTS FOR EGRESS OPENINGS THE USE OF IP NO. 21174/21184 IS REOENDED, S THE VENTILTION POSITION OTHERWISE MY E DIFFIULT TO HIEVE EUSE OF THE OPENING GEOMETRY OF THE GERS. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 17/11

-11 TOP SWING FITTING IP N0.s 21874-82 MTERIL SURFE IP N0. STEEL WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 1 SET FRME DIMENSION INSIDE SREW PPROX WEIGHT KG /SET 21874 1 0 21 1 18 54 54 -,5 & 4,0 1,1 21875 1 0 21 1 18 4 4-7,5 & 4,0 1, 2187 1 0 21 1 18 74 74-8,5 & 4,0 1,5 21877 1 0 21 1 18 84 84-9,5 & 4,0 1,7 21878 1 0 21 1 18 94 94-10,5 & 4,0 1,9 21879 1 0 21 1 18 104 104-11,5 & 4,0 2,1 21880 1 0 21 1 18 114 114-12,5 & 4,0 2, 21881 1 0 21 1 18 124 124-1,5 & 4,0 2,5 21882 1 0 21 1 18 14 14-14,5 & 4,0 2,7 DJUSTLE FRITION ONELED FITTINGS FULLY REVERSILE 170 0 OPENS LER OF URTINS ND WINDOW FRME 1/2 SET MUSHROOM HED ESPGNOLETTE IP NO.s 2051-70, ROLLER OLT ESPGNOLETTE IP NO.s 2151-70 ND SIDE OLT ESPGNOLETTE IP NO.s 2701-9 N E USED NODIZED RILS FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE DJUSTLE FRITION RESTRITORS, SEE SETION D 15/02

-12 IMPORTNT: FOR THE FITTING OF NY WINDOW OF SIZE LRGER THN M 10 T LEST THREE FIXING POINTS (EXPNSION OLTS) RE REQUIRED FOR EH SIDE FRME. THE SIDE FRMES MUST E STRIGHT TO THE EFFET THT THE DISTNE ETWEEN THE SIDE FRMES (SLIDING RILS) IS EXTLY THE SME FOR NY HEIGHT OF THE FRME. THIS IS IMPERTIVE FOR THE SLIDES TO TRVEL FREELY IN THEIR LUMINIUM RILS. IP N0. 21158 IP NO. FITTING INSTRUTIONS ERING PLTE FIG. 1 FITTING ON FRME SEURITY POSITION FIG. 5 LENGHT OF FITTINGS TOP FRME MIN. 28,0 49,0 27,5 48,0 27,0 47,0 FIG. 4 THE DIMENSIONS INDITED IN FIGURE 4 MEN THT THE WETHERSTRIP MUST E MOUNTED ON THE SSH MX. WEIGHT KG 21874 54 45 21875 4 45 2187 74 0 21877 84 45 21878 94 0 21879 104 0 21880 114 0 21881 124 0 21882 14 0 USE THE LRGEST POSSILE FITTING 17. TOP SSH FIG. 2 12 SSH 7 EXMPLE WOOD PROFILE 2 8-9 FITTING: 1. PLE THE FITTING INTO OTH SIDES OF THE FRME. 2. POSITION FITTING GINST TOP FRME. USE SREW NO.,5.. PLE THE ERING PLTE GINST THE TOP ND GINST THE LUMINIUM RIL. USE SREW NO. 4,0 4. INSERT THE SSH ETWEEN HINGE RMS ND PUSH THE SSH GINST THE STOP RKET. FSTEN THE SSH WITH SREW NO. 4,0, STRTING WITH THE SREW IN THE STOP RKET. 5. THE SSH N E OPENED TO NY NGLE. WITH LRGE OPENING NGLE LIGHT FRITION N E OTINED Y MENS OF THE FRITION SREWS IN THE SIDES. THE FRITION HS TO E THE SME ON OTH SIDES. PLESE NOTE THT THE SSH IS NOT SEURED FOR HEVY WINDS ND OTHER HEVY INFLUENE.. FIT THE RESTRITOR IP NO. 21158 ON THE LEFT SIDE. USE SREW NO..5. - SEE FIG. 1. 7. FOR SEURITY RESONS. MKE SURE THT THE TOP NOTH IS LWYS USED IN LENING POSITION SEE FIG 5. OTTOM NOTH IS FOR LIMITED OPENING POSITION OPERTION INSTRUTIONS: 1. OPEN THE WINDOW - THE RESTRITOR WILL UTOMTI- LLY RESTRIT THE WINDOW. 2. PULL THE SSH 20 - PRESS THE RESTRITOR IN THE DIRETION OF THE RROW ND OPEN THE WINDOW - SEE FIG. 1.. WHEN THE WINDOW IS REVERSED FOR LENING, THE MEHNISM WILL LOK UTOMTILLY. DISENGGE S MENTIONED IN POINT 2. MINTENNE: THE FITTINGS RE NOT TO E PINTED. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT GRESE THE LUMINIUM RILS. TEST THE OPERTION FROM TIME TO TIME. SEE LSO SETION H. 7 SSH SIDE FIG. 17. FRME SIDE MIN. 8 12 7 17/04

DJUSTLE NOPY STYS WITH FRITION IP NO.s 2118-87 & 89-1 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED INDUSTRY PKING IN OXES OF 25 SETS SREW PPROX WEIGHT KG /SET 2118 1 0 21 2 12 298 4,0 0,4 21187 1 0 21 2 12 488 4,0 0,0 21189 1 0 21 2 12 74 4,0 0,78 1/2 SET ONELED FITTINGS DJUSTLE FRITION FRITION IN LL POSITIONS NODIZED LUMINIUM RILS VERTILLY DJUSTLE ± 1.5 ESY TO MOUNT MXIMUM SELING FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 2118-87 + 21189 1/11

-14 FITTING INSTRUTIONS EXMPLE WOOD PROFILE 49 28 HORIZONTL PLN SIDE FRME/ TOP FRME 17. SIDE FRME/ TOP FRME FIG. 1 12 7 2 FIG. 2 FITTING: 1. SIDE SSH & -FRME ND TOP SSH & -FRME RE MDE WITH THROUGH-GOING GROOVES, SEE FIGURE 1. IP NO. 2118 21187 21189 MX. SSH WEIGHT KG 40 50 70 MX. INSIDE FRME HEIGHT 844 144 1544 USE SREW NO. 4.0 4.0 4.0 OS! RE. IP NO. 21187: FOR IG WINDOWS (>1200 ) WITH -LYER GLSS ND NO REQUIREMENTS FOR EGRESS OPENINGS THE USE OF IP NO. 21189 IS REOENDED, S THE VENTILTION POSITION OTHERWISE MY E DIFFIULT TO HIEVE EUSE OF THE OPENING GEOMETRY OF THE GERS. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 2. LOSE THE FITTING ND PLE IT IN THE GROOVE OF THE SIDE FRME. PLE THE FITTING UP GINST THE OTTOM OF THE GROOVE IN THE TOP FRME. FSTEN THE SREW ELOW, OPEN THE FITTING ND FSTEN THE REMINING SREWS. 21187: FSTEN THE STOPPLTE PLED IN THE LUMINIUM RIL Y USING SREW IN THE TOP SREW HOLE FOR MXIMUM FIRE-ESPE OPENING. IF THE OTTOM SREWHOLE IS USED THEN THE FITTING WILL RRY MX. SSH WEIGHT OF 0 KGS., UT THE FIRE-ESPE OPENING WILL E REDUED. 21189: FSTEN THE STOPPLTE PLED IN THE LUMINIUM RIL Y USING SREW IN THE TOP SREW HOLE FOR MXIMUM FIRE-ESPE OPENING. IF ONE OF THE OTHER SREWHOLE RE USED THEN THE FIRE-ESPE OPENING WILL E REDUED, UT THE MX. SSH WEIGHT WILL THEN E: ENTER HOLE: 85 KGS - OTTOM HOLE: 100 KGS.. PUSH THE SSH INTO ITS PLE Y INSERTING IT ETWEEN THE FITTINGS, GUIDED Y THE GROOVES IN THE SSH, TILL THE SSH HITS THE STOPS OF THE FITTING. THESE STOPS WILL GURNTEE G ETWEEN FRME ND SSH. FSTEN THE SREWS, STRTING WITH THE ONES IN THE TOP RKETS. 4. NOW THE FRITION MY E DJUSTED Y MENS OF THE SREWS IN THE SLIDES. EFORE DJUSTMENT, PRESS THE SLIDING PRT DOWN TO THE STOPS. THE EST RESULT FOR THE WINDOW MOVEMENT IS HIEVED Y EQUL FRITION T EITHER SIDE. EENTRI SREW MRK 5. THE SSH N E DJUSTED ±1.5 UP OR DOWN. EFORE NY DJUSTMENT THE MOUNTING SREWS IN THE OTTOM IN EH SIDE OF THE FRME HVE TO E LOOSENED. THEN DJUST Y USING TORX20 KEY TO TURN THE EENTRI SREW. Y DELIVERY THE MRK ON THE EENTRI SREW IS IN VERTIL PERSITION INDITING THE 0-POSITION. WHEN THE MRK IS IN HORIZONTL POSTION IN EITHER TOP OR OTTOM, THE FITTING IS DJUSTED TO IT S MX OF ±1.5. FTER THE DJUSTMENT THE MOUNTINGSREWS IN THE OTTOM OF EH SIDE RE FSTENED. FIG. 1/11

-15 NOPY STYS WITH FRITION IP NO.s 21180-81 & 84 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED INDUSTRY PKING IN OXES OF 25 SETS SREW PPROX WEIGHT KG /SET 21180 1 0 21 2 12 29 4,0 0,4 21181 1 0 21 2 12 48 4,0 0,0 21184 1 0 21 2 12 741 4,0 0,78 ONELED FITTINGS DJUSTLE FRITION FRITION IN LL POSITIONS NODIZED LUMINIUM RILS 1/2 SET FIRE-ESPE OPENING: PLESE SEE WWW.IPFITTINGS.OM/RESUE 21180-84 1/11

-1 FITTING INSTRUTIONS 49 28 HORIZONTL PLN SIDE FRME/ TOP FRME 12 7 2 17. SIDE SSH/ TOP SSH FIG. 1 FIG. 2 OS! RE. IP NO. 21181: IP NO. 21180 21181 21184 FOR IG WINDOWS (>1200 ) WITH -LYER GLSS ND NO REQUIREMENTS MX. SSH WEIGHT KG 40 50 70 FOR EGRESS OPENINGS THE USE OF IP NO. 21184 IS REOENDED, S THE MX. INSIDE FRME HEIGHT 844 144 1544 VENTILTION POSITION OTHERWISE MY E DIFFIULT TO HIEVE EUSE SREW 4.0 4.0 4.0 OF THE OPENING GEOMETRY OF THE GERS. MONTERING: 1. SIDE SSH & -FRME ND TOP SSH & -FRME RE MDE WITH THROUGH-GOING GROOVES, SEE FIGURE 1. 2. LOSE THE FITTING ND PLE IT IN THE GROOVE OF THE SIDE FRME. PLE ND FSTEN THE SREW IN THE OTTOM HOLE OF THE FITTING. OPEN THE FITTING ND FSTEN THE REMINING SREWS. 21181: FSTEN THE STOP PLTE THROUGH THE UPPER SREW HOLE IN THE STOP PLTE ND THROUGH THE UPPER SREW HOLE IN THE LURIL. THIS ENLES MX. FIRE ESPE OPENING. USE LOWER SREW HOLE IN STOP PLTE TO HIEVE MX,. SSH LOD OF 0 KGS. IF LOWER SREW HOLE IS USED THE FIRE ESPE OPENING WILL E REDUED. 21184: LWYS USE THE UPPER SREW HOLE IN THE LURIL FOR FSTENING THE STOP PLTE. USE THE UPPER SREW HOLE IN STOP PLTE FOR MX. FIRE ESPE OPENING. USE THE MIDDLE SREW HOLE IN THE STOP PLTE TO HIEVE MX. SSH LOD OF 85 KGS. USE THE LOWER SREW HOLE IN THE STOP PLTE TO HIEVE MX. SSH LOD OF 100 KGS. IF MIDDLE OR LOWER SREW HOLES IN STOP PLTE RE USED THE FIRE ESPE OPENING WILL E REDUED.. PUSH THE SSH INTO PLE Y INSERTING IT ETWEEN THE FITTINGS GUIDED Y THE GROOVES IN THE SSH UNTIL THE SSH HITS THE STOPS OF THE FITTING. THESE STOPS WILL GURNTEE G ETWEEN FRME ND SSH. FSTEN THE SREWS, EGINNING WITH THE ONES IN THE TOP RKETS FIG. 4. THE FRITION MY NOW E DJUSTED Y USING THE SREWS IN THE SLIDING ELEMENTS. THE EST RESULT FOR WINDOW MOVEMENT IS HIEVED Y EQUL FRITION OF OTH SIDES. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 1/11

D-01 SFETY RESTRITOR IP N0. 2110 IP NO. MTERIL STEEL LEFT SURFE ELFTROPLTED STNDRD PKING IN OXES OF 10 PIEES D SREW PPROX. WEIGHT KG/EH 2110 1 7 21 1 50 4 0 0,5 & 4,0 0,12 USED IN ONJUNTION WITH REVERSILE PROJETING GER IP NO.S 21144-52 ND IP NO.s 21874-82 D 0/01

D-02 FITTING INSTRUTIONS MIN. 50 R5 MX. Ø21 EXMPLE WOOD PROFILE - SEE FIG. 1. 5 17.5 12 MOUNTING: 1.5 40.5 4.5 1. PLE THE SFETY TH INTO THE UT OUT, HOLD GINST THE EDGE OF THE LUMINIUM HNNEL. THEN FSTEN WITH NO. 4 SREW RIGHT THROUGH THE 21 HOLE. 2. PLE THE OVER PLTE OVER THE UT OUT ND THE VISILE PRT OF THE SFETY TH, FSTEN WITH TWO NO..5 SREWS. 9 0.5-1 SIDE FRME FIG. 1. PLE THE RESTRITOR KNO OVER THE 21 HOLE. THE PIN ON THE KSIDE OF THE OPERTING HNDLE MUST E MOUNTED IN THE HOLE (4 ) ON THE SFETY TH. PUSH THE FRONT PLTE WY FROM THE WINDOW SO THT THE RESTRITOR KNO HS THE MXIMUM POSSILE MOVEMENT - FSTEN THE TWO NO..5 SREWS ON THE FRONT PLTE. OVER PLTE SFETY TH RESTRITOR KNO 4. ONTROL OF FUNTION: THE RESTRITOR KNO MUST HVE MOVEMENT OF PPROXIMTELY 7 ND E LE TO RETURN Y ITSELF. THE SFETY TH MUST FOLLOW THE MOVEMENT OF THE RESTRITOR KNO. OPERTING INSTRUTIONS: 1. OPEN THE SSH UNTIL THE SFETY TH ENGGES. FRONT PLTE 2. PULL IN THE SSH PPROXIMTELY 20. DRW THE RESTRITOR KNO DIRETLY TOWRDS YOU, ND OPEN SSH.. THE SSH STOPS UTOMTILLY IN THE LENING POSITION. TO RELESE THE SSH FOLLOW PROEDURE S GIVEN IN POINTS 1 ND 2. SIDE FRME OPENED POS. LOSED POS. FIG. 2 SIDE SSH MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 0/01

D-0 SUPPORT RIL IP N0. 21227 MTERIL SURFE IP NO. LUMINIUM/PLSTI LEFT RIGHT NODIZED STNDRD PKING IN OXES OF 5 SETS SREW PPROX. WEIGHT KG / SET 21227 0 7 8 00 1 95 5,5 4,0 0,0 1 SET RIGHT HND USED IN ONJUNTION WITH SFETY RESTRITOR IP NO. 21228 ND: HINGES IP NO. 1117-74 & 77 SIDE SWING WINDOW 90 0 WITH FRITION IP NO. 2119 SFETY RESTRITOR FITTING IP N0. 21228 INSTRUTIONS MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS SREW PROX. WEIGHT KG / SET 21228 1 7 8 21 1 92 1,5 4,0 0,07 1 SET LEFT HND 10/11

D-04 FITTING INSTRUTIONS X + 79 X-DIMENSION IS OPTIONL. WE SUGGEST 25 S MINIMUM. Y USING LRGER X-DIMENSION THE VENTILTION OPENING WILL E EXTENDED. T THE SME TIME THE TURNING OF SSH TO LENING POSITION WILL E REDUED S THE RESTRITOR WILL STOP THE SLIDING PRT. FITTING SHOWN UNDER THE SSH PRT FITTING SHOWN ON THE OTTOM FRME PRT IMPORTNT: THE PIVOT TH OF THE RESTRITOR IS FITTED IN THE OTTOM HNNEL OF THE SSH. USE THE MRK SHOWN ON THE RESTRITOR RM S LOTION POINT FOR THE PIVOT TH. 1.8 X FIG. 1 RIGHT HND ILLUSTRTION WHEN USING THE RESTRITOR FOR SIDE HUNG LIFT-OFF WINDOWS MOUNT THE RESTRITOR ON THE SUPPORT RIL IP NO. 21227. FIT THE ERING LOK (PLSTI) INTO THE IP GROOVE IN THE OTTOM HNNEL OF THE SSH OVER THE FREE PRT OF THE SUPPORT PLTE - OPPOSITE THE HINGE SIDE. OPERTING INSTRUTIONS: 1. OPEN THE SSH UNTIL THE RESTRITOR TH ENGGES. EXMPLE WOOD PROFILE 2 PULL THE SSH IN PPROXIMTELY 20.. PRESS THE RESTRITOR RM IN THE DIRETION OF THE RROW ND OPEN THE SSH. OTTOM FRME 17. 2 4. WHEN THE WINDOW IS LOSED THE RESTRITOR RE-ENGGES UTOMTILLY. USE SREW NO. 4.0 7 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. OTTOM SSH FIG. 2 49 40 0/01

D-05 SFETY RESTRITOR IP NO. 2120 MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS D SREW PROX. WEIGHT KG / SET 2120 1 7 8 21 1 92 25 90 40 4,0 0,09 USED IN ONJUNTION WITH: HINGES IP NO. 1117-74 & 77-79 SIDE SWING WINDOW 90 0 WITH FRITION IP NO.s 21195 D 2120 RIGHT HND 17/0

D-0 FITTING INSTRUTIONS X + 74 X - 27 X-DIMENSION IS OPTIONL. WE SUGGEST 5 S MINIMUM. Y USING LRGER X-DIMENSION THE VENTILTION OPENING WILL E EXTENDED. FITTING SHOWN UNDER THE SSH PRT IMPORTNT: THE PIVOT TH OF THE RESTRITOR IS FITTED IN THE OTTOM HNNEL OF THE SSH. USE THE MRK SHOWN ON THE RESTRITOR RM S LOTION POINT FOR THE PIVOT TH. THE INLUDED SUPPORT FITTING (PV-LOK) IS MOUNTED IN THE OTTOM HNNEL OF THE SSH - OPPOSITE THE HINGE SIDE - JUST OVER THE FREE PRT OF THE SMLL LU-RIL. FITTING SHOWN ON THE OTTOM FRME PRT 20 4 X FIG. 1 RIGHT HND ILLUSTRTION OTTOM FRME EXMPLE WOOD PROFILE OPERTING INSTRUTIONS: 1. OPEN THE SSH UNTIL THE RESTRITOR TH ENGGES. 2 PULL THE SSH IN, PPROXIMTELY 20. OTTOM SSH. PRESS THE RESTRITOR RM IN THE DIRETION OF THE RROW ND OPEN THE SSH. 17, 2 4. WHEN THE WINDOW IS LOSED THE RESTRITOR RE-ENGGES UTOMTILLY. 7 USE SREW NO. 4.0 MINTENNE: THE FITTINGS MUST NOT E PINTED. TEST THE OPERTION ND LURITE THE PIVOT (ENTRE OF ROTTION) FROM TIME TO TIME, MINIMUM TWIE YER. SEE LSO SETION H. OTTOM FRME 4 49 28 FIG. 2 17/0

D-07 SFETY RESTRITOR IP NO. 2121 IP NO. MTERIL STINLESS STEEL LEFT RIGHT SURFE UNMHIHED STNDRD PKING IN OXES OF 5 SETS SREW PPROX. WEIGHT KG / SET 2121 8 7 8 8 1 105 28 4,0 0,080 1 SET RIGHT HND RETINS THE WINDOW IN OPENING POSITION 0 USED IN ONJUNTION WITH: HINGES IP NO.s 1117-74 & 77 SIDESWING FITTING IP NO.s 21201-17 FITTING INSTRUTIONS PPROX. 45 FITTING ON OTTOM FRME EXMPLE WOOD PROFILE OTTOM SSH 7 17. 2 SIDE SSH FITTING ON SIDE SSH 7 17. 12 FIG. 1 RIGHT HND ILLUSTRTION OPERTING INSTRUTIONS: OTTOM FRME 49 FIG. 2 1. OPEN THE WINDOW UNTIL THE RESTRITOR IS IN POSITION. 2. DRW THE SSH 20 KWRDS.. PRESS THE RESTRITOR GINST THE FRME ND THE SSH IS RELESED. 12 28 FIG. SIDE FRME MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 0/01

D-08 SFETY RESTRITOR IP NO. 212 IP NO. MTERIL STINLESS STEEL WITHOUT SPEIFITION SURFE UNMHIHED STNDRD PKING IN OXES OF 5 SETS SREW PPROX. WEIGHT KG / SET 212 8 0 8 1 97 40,5 0,075 RETINS THE WINDOW IN OPENING POSITION 0 1 SET USED IN ONJUNTION WITH: TOP HINGES IP NO.s 21125-28 REV. PROJ. GER IP NO.s 21144-52 & IP NO.s 21874-82 NOPY STY IP NO.s 2117-82 FITTING INSTRUTIONS EXMPLE WOOD PROFILE OTTOM SSH 17. 2 FITTING ON OTTOM SSH PPROX. 45 FIG. 1 OPERTING INSTRUTIONS: FITTING ON OTTOM FRME 1. OPEN THE WINDOW UNTIL THE RESTRITOR IS IN POSITION. 2. DRW THE SSH 20 KWRDS.. PRESS THE RESTRITOR TO THE RIGHT ND OPEN THE SSH. OTTOM FRME 12 28 49 FIG. 2 7 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 10/12

D-09 FIRE ESPE FITTING FOR TOP HUNG WINDOWS IP NO. 2121 1/2 SET LEFT HND IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELETROPLTED STNDRD PKING IN OXES OF 5 SETS 2121 1 0 21 1 50 17x2 4,0 0,4 LENGHT MTERIL SREW PPROX. WEIGHT KG / SET USED IN ONJUNTION WITH: TOP HINGES IP NO.s 21125-28 FITTING INSTRUTIONS MX. HEIGHT OF SSH: 1100 MX. WEIGHT: 0 KG SIDE FRME 12 EXMPLE WOOD PROFILE L 17. 7 L SIDE SSH FIG. 1 FIG. 2 FIG. THE FITTINGS RE PLED IN THE GROOVES ON OTH SIDES, SO THT THE WNTED OPENING IS OTINED. MESURES L SHOULD E THE SME ON OTH SSH ND FRME. USE SREW NO. 4,0. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 15/02

D-10 SFETY RESTRITOR IP N0. 212 IP NO. MTERIL STEEL LEFT RIGHT SURFE ELETROPLTED STNDRD PKING IN OXES OF 5 SETS SREW PPROX. WEIGHT KG / SET 1 SET RIGHT HND 212 1 7 8 21 1 92,5 & 4,0 0,0 FITTING INSTRUTIONS X-DIMENSION IS OPTIONL. WE SUGGEST S MINIMUM. Y USING LRGER X-DIMENSIONS THE VENTILTION OPENING WILL E EXTENDED. IMPORTNT: THE REEIVER MUST E FITTED IN THE PROFILE GROOVE OF THE SSH. USE THE MRK SHOWN ON THE RESTRITOR RM S LOTION POINT FOR THE PIVOT TH. FIG. 1 RIGHT HND ILLUSTRTION (SEEN FROM THE OUTSIDE) MRK OPERTING INSTRUTIONS: 1. OPEN THE WINDOW UNTIL THE RESTRITOR IS IN POSITION. 2 DRW THE SSH 20 KWRDS.. PRESS THE RESTRITOR IN THE DIRETION OF THE RROW ND OPEN THE WINDOW. 4. WHEN THE WINDOW IS LOSED THE RESTRITOR RE-ENGGES UTOMTILLY. 1/0 RESTRITOR NO. 212 N E USED ON TOP HUNG S WELL S ON NOPY STY WINDOWS. PLE THE RESTRITOR IN THE PROFILE GROOVE IN THE OTTOM OF THE SIDE FRME ND PLE THE REEIVER IN THE PROFILE GROOVE IN THE SIDE OF THE SSH S SHOWN ON FIG. 1. THE RESTRITOR N LSO E USED ON SIDE HUNG WINDOW. IN THIS SE: PLE THE RESTRITOR IN THE PROFILE GROOVE IN THE TOP OF THE FRME ND THE REEIVER IN THE PROFILE GROOVE IN THE TOP OF THE SSH. X SIDE FRME OTTOM FRME SSH X+88 EXMPLE WOOD PROFILE SIDE SSH FIG. 2 17. 2 SIDE FRME 12 7 FIG. 28 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 49

D-11 SUPPORT FITTING FOR WINDOWS & DOORS - DJUSTLE IP N0. 2122 MTERIL SURFE IP NO. LUMINIUM/PLSTI WITHOUT SPEIFITION NODIZED STNDRD PKING IN OXES OF 25 PIEES SREW PPROX. WEIGHT KG/100 P. 2122 0 0 00 1 0 40 1,0 & 4,0 1,40 FITTING INSTRUTIONS OTTOM SSH THE SUPPORT FITTING IS USED TO SUPPORT WINDOWS ND DOORS. THE PLSTI WEDGE IS MOUNTED IN THE IP SYSTEM GROOVE ON THE SSH ND THE LUMINIUM RIL IS MOUNTED ON THE OTTOM FRME, S SHOWN. PLSTI WEDGE 17. 1.5 10.5 7 OTTOM FRME LUMINIUM PLTE FIG. 1 FIG. 2 THE SUPPORT FITTING N E DJUSTED Y LOOSENING THE SREW IN THE SMLL PLSTI LOK ND Y DJUSTING THE MENTIONED PLSTI LOK TO THE LEFT OR TO THE RIGHT. MXIMUM ND MINIMUM HEIGHT OF THE FITTING IS SHOWN OVE - PLESE REMEMER TO DD THE THIKNESS OF THE LUMINIMUM RIL. 1/0

D-12 FIRE-ESPE TH IP N0. 2115 IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELFTROPLTED STNDRD PKING IN OXES OF 10 PIEES SREW PPROX. WEIGHT KG/EH 2115 1 0 21 1 70 8,0 0,02 USED IN ONJUNTION WITH: REVERSILE PROJETING GER IP NO.s 21144-52. FITTING INSTRUTIONS 49 FIG. 1 X HNDLE IP NO. X 21144 50 21145 7 2114 102 21147 128 21148 155 21149 177 21150 195 21151 209 21152 22 FIG. 2 MOUNTING: 1. THE FITTING IS PLED IN RIGHT SIDE FRME, SEEN FROM THE INSIDE. PLE THE FITTING GINST THE RER EDGE OF THE LUMINIUM RIL, SEE FIG. 1. 2. TO OTIN MXIMUM FIRE-ESPE OPENING PLE THE FITTING ORDING TO DIMENSION, SEE FIG. 2. OPERTING INSTRUTIONS: 1. OPEN THE WINDOW UNTIL THE FIRE-ESPE TH ENGGES. 2. THE WINDOW N E LOSED Y OPENING IT NOTHER 2 M, ND PULLING THE HNDLE KWRDS, THEN LOSE THE WINDOW ND LET GO OF THE HNDLE WHEN THE OTTOM RM OF THE FITTING HS PSSED THE FIRE-ESPE TH, SEE FIG. 1.. THE FIRE-ESPE TH WILL UTOMTILLY ENGGE NEXT TIME THE WINDOW IS OPENED. 5. IF THE WINDOW IS FULLY REVERSED THEN THE FIRE-ESPE TH HS TO E RELESED S MENTIONED IN 2. USE SREW NO.,0 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 1/0

D-1 VENTILTION TH IP N0. 21157 MTERIL SURFE IP NO. STEEL LEFT ELETROPLTED STNDRD PKING IN OXES OF 10 PIEES SREW PPROX. WEIGHT KG/EH 21157 1 7 21 1 20,0 0,02 USED IN ONJUNTION WITH: REVERSILE PROJETING GER IP NO. 21144-52, MINIMUM OF 20 ETWEEN OTTOM LU-RIL ND OTTOM FRME IS NEEDED. FITTING INSTRUTIONS MOUNTING INSTRUTIONS: (USE SREW NO..0) 1. THE FITTING IS MOUNTED ON THE RIGHT SIDE SEEN FROM THE INSIDE. THE FITTING IS MOUNTED T THE OTTOM END OF THE LURIL OF 21144-52, SEE FIG. 1. IMPORTNT: THE SMLL PIEE OF LU-RIL FOR THE VENTILTION TH MUST E PLED REFULLY RIGHT UNDER THE LU-RIL IN THE FRME. MKE SURE THT NOTHING PREVENTS THE SMOOTH MOVING OF THE VENTILTION TH ETWEEN THE TWO LU-RILS. 2. THE FINGERSREW IS LOOSENED ND THE FITTING IS ONNETED TO THE OTTOM SLIDING ELEMENT OF 21144-52, THIS WY THE FITTING WILL LWYS FOLLOW THE OTTOM SLIDING ELEMENT OF 21144-52. FIG. 1 TH FINGERSREW SLIDING ELEMENT OPERTING INSTRUTIONS: 1. THE WINDOW IS OPENED TO THE WNTED POSITION ND THE FINGERSREW IS FSTENED. 2. WHEN HNGING THE OPENING POSITION OF THE WINDOW THE FINGER- SREW MUST E LOOSENED EFORE OPERTING THE WINDOW. IMPORTNT: THE VENTILTION FITTING WILL E DESTROYED IF THE FINGER- SREW IS NOT LOOSENED EFORE OPERTING THE WINDOW. 20 49 LU-RIL MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN LURITING THE THRED VOID LURINT ETWEEN THE SLIDING ELEMENT ND THE LU-RIL S THIS OULD RESULT IN ML-FUNKTION OF THE FITTING. SEE LSO SETION H. 0/01

D-14 SFETY RESTRITOR IP N0. 21158 MTERIL SURFE IP NO. STEEL LEFT ELETROPLTED STNDRD PKING IN OXES OF 20 PIEES MTERIL SREW PPROX. WEIGHT KG/EH 21158 1 7 21 1 85 4,0 0,12 USED IN ONJUNTION WITH: REVERSILE PROJETING GER IP NO.s 21144-52 ND IP NO.s 21874-82. FITTING INSTRUTIONS MOUNTING INSTRUTIONS: 1. SFETY TH IP NO. 21158 IS MOUNTED ON THE LEFT SIDE - SEEN FROM THE INSIDE - USING SREW NO..0 SEE FIG. 1. THE SFETY OPENING OF THE WINDOW IS PROX. 100. OPERTING INSTRUTIONS: 1. THE WINDOW IS OPENED UNTIL THE SFETY TH UTOMTI- LLY ENGGES. IP NO. 21158 FIG. 1 2. TO OPEN THE WINDOW - LOSE THE WINDOW PROX. 2 M. PRESS THE SFETY TH, SEE FIG. 1, IN THE DIRETION SHOWN Y THE RROW, THEN OPEN THE WINDOW.. THE SFETY TH UTOMTILLY RE-ENGGES NEXT TIME THE WINDOW IS OPENED. USE SREW NO..0. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 15/01

D-15 SFETY RESTRITORS IP NO.s 2112-4 MTERIL SURFE IP NO. STEEL LEFT ELETROPLTED STNDRD PKING IN OXES OF 20 PIEES SREWS PPROX. WEIGHT KG / PIEES 2112 1 7 21 1 170,5 0,0 211 1 7 21 1 170,5 0,0 2114 1 7 21 1 170,5 0,0 2112-2114 IP NO.s 2112-: USED IN ONJUNTION WITH REVERSILE PROJETING GER IP NO.s 2104-52, IP NO.s 21144-52 ND IP NO.s 21874-82. IP NO. 2114: USED IN ONJUNTION WITH REVERSILE PROJETING GER IP NO.s 2104-52 ND IP NO.s 21144-52. 1/09

D-1 FITTING INSTRUTIONS FITTING: 1. PLE THE SFETY TH IN THE LEFT SIDE FRME SO THT THE FRONT EDGE OF THE FITTING PLTE LIES GINST THE RER EDGE OF THE LUMINIUM RIL. 2. THE VERTIL POSITION DEIDING THE SIZE OF THE OPENING GP IS OPTIONL. THE OPENING GP DEPENDS ON OTH THE VERTIL POSITION OF THE SFETY TH ND THE MODULE SIZE. OPERTING INSTRUTIONS: 1. THE WINDOW IS OPENED UNTIL THE SFETY RESTRITOR UTOMTILLY ENGGES. PULL 2. IP NO 2112-: TO FURTHER OPEN THE WINDOW LOSE THE WINDOW PPROX. 2 M, PRESS THE OTTOM PRT OF THE SFETY RESTRITOR IN THE DIRETION SHOWN Y THE RROW. PUSH THE SSH TO OPEN WINDOW. LET GO OF THE SFETY RESTRITOR ND IT WILL ENGGE IN THE NEXT POSITION. TO FULLY OPEN THE WINDOW - REPET THE PROES. IP NO. 2114: TO OPEN ND LOSE THE WINDOW PRESS THE OTTOM PRT OF THE SFETY RESTRITOR IN THE DIRETION SHOWN Y THE RROW. PUSH/PULL THE SSH TO OPEN/LOSE THE WINDOW.. NEXT TIME THE WINDOW IS OPENED THE SFETY RESTRITOR UTOMTILLY REENGGES. IP NO.S 2112- FIG. 1 IP NO. 2114 MINTENNE: DO NOT PINT THE FITTING. WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. IP NO. 2112 MIN. 2 211 + 4 MIN. 21 MX. 22.9 FIG. 2 1/09

D-17 SFETY RESTRITOR IP N0. 2122 RESTRITOR IP NO. MTERIL STINLESS STEEL LEFT RIGHT SURFE UNMHINED STNDRDPKING IN OXES OF 10 PS. 2122 8 7 8 8 1 119 4,5 4,0 0,05 SREW PPROX. WEIGHT KG / EH 2122 LEFT HND MOUNTED ON THE SSH ESY TO OPERTE STINLESS STEEL RETINS THE WINDOW IN VENTILTION POSITION RESTRITOR TH 21218 - LEFT HND IP NO. MTERIL STEEL STINLESS STEEL W/O SPEIFITION LEFT RIGHT SURFE ELETROPLTED UNMHINED STNDRDPKING IN OXES OF 10 PS. PPROX. WEIGHT KG / EH 21218-8 - 7 8-8 1 0,0 21219-8 0 - - - 8 1 0,0 21219 21220 - LEFT HND 21220 1 - - 7 8 21-1 0,01 IP NO. 21218 IS TO E USED ON WINDOWS WITH EXTR RETE SILL IP NO. 21219 IS TO E USED ON WINDOWS WITH 7 0 EVEN SILL IP NO. 21220 IS TO E USED IN ONJUNTION WITH IP NO. 21281-8 IP NO. 21218 & 21219 RE SUPPLIED WITH SUP- PORT FITTING TO ENSURE SFE TH Y EH OPENING. 0/01

D-18 FITTING INSTRUTIONS HLF WIDTH OF OUTER SSH LESS 40 (21219) 25 122 + X FITTING ON OTTOM SSH HLF WIDTH OF INNER FRME LESS 40 (21219) FING RE 47 + X X-DIMENSION IS OPTIONL. WE SUGGEST S MINIMUM. Y USING LRGER X-DIMENSION THE VENTILTION OPENING WILL E EXTENDED. T THE SME TIME THE TURNING OF SSH TO LENING POSITION WILL E REDUED S THE RESTRITOR WILL STOP THE SLIDING PRT. FITTING ON OTTOM FRME FIG. 1 RIGHT HND ILLUSTRTION EXMPLES WOOD PROFILES OTTOM SSH 17, OTTOM SSH 17, OTTOM SSH 17, 7 7 7 OTTOM FRME 2 2 OTTOM FRME 2 OTTOM FRME 28 28 40 49 FIG. 2 IP NO. 21220 IS USED IN ONJUNTION WITH IP NO. 21281-8. THE PIVOT TH IS MOUNTED ON THE OTTOM LU-RIL. 4 49 FIG. IP NO. 21219 IS USED ON WINDOWS WITH 7 0 EVEN SILL. THE PIVOT TH ND THE SUPPORT FITTING IS MOUNTED 4 FROM THE FRONT OF OTTOM FRME 28 40 49 FIG. 4 IP NO. 21218 IS USED ON WINDOWS WITH EXTR RETE SILL. FITTING PLTE HS TO E MOUNTED UNDER THE RESTRITOR ON THE OTTOM SSH OPERTING INSTRUTIONS: 1. OPEN THE WINDOW UNTIL THE RESTRITOR ENGGES. 2 PULL THE SSH PPROXIMTELY 20 KWRDS.. PRESS THE RESTRITOR OUTWRDS S YOU OPEN THE WINDOW. 4. WHEN THE WINDOW IS LOSED THE RESTRITOR RE-ENGGES UTOMTILLY. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN FITTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. USE SREW NO. 4.0 FOR IP NO. 2122+21219-20 USE SREW NO..5 FOR IP NO. 21218 0/01

D-19 SFETY RESTRITOR IP NO. 2129 MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKING IN OXES OF 5 SETS SREW PROX WEIGHT KG / SET 2129 1 7 8 21 1 92 25 4,0 0,0 2129 RIGHT HND USED IN ONJUNTION WITH FULLY REVERSILE FITTINGS FOR SIDE SWING WINDOW 180 0 IP NO.s 21290-95 17/0

D-20 FITTING INSTRUTIONS X + 74 FITTING SHOWN UNDER THE SSH PRT X-DIMENSION IS OPTIONL. WE SUGGEST 25 S MINIMUM. Y USING LRGER X-DIMENSION THE VENTILTION OPENING WILL E EXTENDED. T THE SME TIME THE TURNING OF SSH TO LENING POSITION WILL E REDUED S THE RESTRITOR WILL STOP THE SLIDING PRT. IMPORTNT: THE PIVOT TH OF THE RESTRITOR IS FITTED IN THE OTTOM HNNEL OF THE SSH. USE THE MRK SHOWN ON THE RESTRITOR RM S LOTION POINT FOR THE PIVOT TH. FITTING SHOWN ON THE OTTOM FRME PRT 20 4 X OTTOM FRME FIG. 1 RIGHT HND ILLUSTRTION EXMPLE WOOD PROFILE OPERTING INSTRUTIONS: 1. OPEN THE SSH UNTIL THE RESTRITOR TH ENGGES. 2 PULL THE SSH IN, PPROXIMTELY 20. OTTOM SSH. PRESS THE RESTRITOR RM IN THE DIRETION OF THE RROW ND OPEN THE SSH. 17, 2 4. WHEN THE WINDOW IS LOSED THE RESTRITOR RE-ENGGES UTOMTILLY. 7 USE SREW NO. 4.0 MINTENNE: THE FITTINGS MUST NOT E PINTED. TEST THE OPERTION ND LURITE THE PIVOT (ENTRE OF ROTTION) FROM TIME TO TIME, MINIMUM TWIE YER. OTTOM FRME 4 49 28 FIG. 2 17/0

E-01 ESPGNOLETTES WITH MUSHROOM HED OLTS IP NO.s 2051-0 & 201-70 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKING IN OXES OF 10 PIEES. INDUSTRY PKING IN OXES OF 25 PIEES. KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2051 1 21 1-00 150 25 8 10 4 1/17 2,5 4,0 0,24 2052 1 21 1 2 400 200 25 8 10 4 1/17 2,5 4,0 0,29 205 1 21 1-500 250 25 8 10 4 1/17 2,5 4,0 0,4 2054 1 21 1 2 00 00 25 8 10 4 1/17 2,5 4,0 0,9 2055 1 21 1-700 50 25 8 10 4 1/17 2,5 4,0 0,44 205 1 21 1 2 800 400 25 8 10 4 1/17 2,5 4,0 0,49 2057 1 21 1-900 450 25 8 10 4 1/17 2,5 4,0 0,54 2058 1 21 1 2 1000 500 25 8 10 4 1/17 2,5 4,0 0,59 2059 1 21 1-1100 550 25 8 10 4 1/17 2,5 4,0 0,4 200 1 21 1 2 1200 00 25 8 10 4 1/17 2,5 4,0 0,9 201 1 21 1-00 150 28 8 10 7 1/17 2,5 4,0 0,24 202 1 21 1-400 200 28 8 10 7 1/17 2,5 4,0 0,29 20 1 21 1-500 250 28 8 10 7 1/17 2,5 4,0 0,4 204 1 21 1 2 00 00 28 8 10 7 1/17 2,5 4,0 0,9 205 1 21 1-700 50 28 8 10 7 1/17 2,5 4,0 0,44 20 1 21 1 2 800 400 28 8 10 7 1/17 2,5 4,0 0,49 207 1 21 1-900 450 28 8 10 7 1/17 2,5 4,0 0,54 208 1 21 1 2 1000 500 28 8 10 7 1/17 2,5 4,0 0,59 D 2051-70 209 1 21 1-1100 550 28 8 10 7 1/17 2,5 4,0 0,4 2070 1 21 1 2 1200 00 28 8 10 7 1/17 2,5 4,0 0,9 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION GUIDING PIN FOR SSH DJUSTLE MUSHROOM HED OLTS ESSORIES - SEE SETION F 0/01

E-02 FITTING INSTRUTIONS IP NO. L 2051 00 195 2052 400 295 KSET DJUSTLE MUSHROOM HED OLTS 205 500 95 2054 00 495 2055 700 595 205 800 95 25 4 2057 900 795 2058 1000 895 2059 1100 995 200 1200 1095 201 00 195 202 400 295 20 500 95 204 00 495 205 700 595 20 800 95 207 900 795 208 1000 895 209 1100 995 2070 1200 1095 USE SREW NO. 4.0 FIG. 1 EXMPLE WOOD PROFILE 28 7 (R) ESPGNOLETTE OLT TO E MOUNTED WITH OLTS POSITIONED S SHOWN (L) L 10 8 X 8 M5 42 PIN FOR GUIDNE IP NO.S 2180-82 R80 IP NO.S 201-70: NON-RNKED FE PLTE 15 9 17. 12 2 1 17. 7-8 5 FIG. 7.7 FIG. 2 SHOWN WITH OLT REEIVER IP NO. 2190 49 7 MINTENNE: WHEN FITTING - LURITE THE MOVLE PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/01

E-0 ESPGNOLETTES WITH SIDE OLTS IP N0.s 2141-48 & 2285-8 MTERIL SURFE IP NO. STEEL SQURE EDGES ELETROPLTED STNDRD PKING IN OXES OF 5 PIEES. L KSET PIN D FEPLTE THIKNESS PLTE THREDED NIPPLE FOR HNDLE SREW PPROX. WEIGHT KG / EH L 2141 1 21 1 500 250 25 8 5 17 2 5,0 0,0 2142 1 21 1 500 250 28 8 8 17 2 5,0 0,0 214 1 21 1 800 400 25 8 5 17 2 5,0 0,50 2144 1 21 1 800 400 28 8 8 17 2 5,0 0,50 L 2145 1 21 1 1000 500 25 8 5 17 2 5,0 0,0 214 1 21 1 1000 500 28 8 8 17 2 5,0 0,0 2147 1 21 1 100 50 25 8 5 17 2 5,0 0,80 2148 1 21 1 100 50 28 8 8 17 2 5,0 0,80 2285 1 21 1 2110 1050 40 8 50 17 2 5,0 1,20 228 1 21 1 2110 1050 40 8 50 17 2 5,0 1,20 ONSELED FITTINGS 19 SIDE OLTS D ESSORIES - SEE SETION F D 2141-48 2285-8 0/01

E-04 FITTING INSTRUTIONS IP NO. L KSET D E F 2141 500 250 140 25 5 - - - 2142 500 250 140 28 8 - - - 214 800 400 290 25 5 - - - 2144 800 400 290 28 8 - - - 2145 1000 500 90 25 5 - - - 214 1000 500 90 28 8 - - - 2147 100 50 540 25 5 - - - 2148 100 50 540 28 8 - - - 2285 2110 1050 100 40 50 0 840 90 G 228 2110 1050 100 40 50 450 840 90 19 EXMPLE WOOD PROFILE IP NO.S 2141-48 19 2 SSH 15 EXMPLE WOOD PROFILE IP NO.S 2285-8 DOOR 11 14 17. FRME 12 FRME 7 L 15 11 17. 12 M5 8 X 8 R10 D 42 L 8 X 8 R10 M5 D 42 E G F 2 14 7 2141-48: FE PLTE N E SHORTENED 50 IN EH END. 2285: T HNDLE HEIGHT 1050 THE FE PLTE N E SHORTENED IN THE TOP TO 1850. 228: T HNDLE HEIGHT 1050 THE FE PLTE N E SHORTENED IN THE TOP TO 140. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 10/01

ESPGNOLETTES WITH ROLLER OLTS IP N0.s 2151-70 E-05 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKING IN OXES OF 10 PIEES KSET PIN D FE PLTE THIKNESS PLTE THREED HOLE FOR HNDLE SREW PPROX. WEIGHT KG / EH 2151 1 21 1 00 150 25 8 10 4 1/17 2,5 5 4,0 0,24 2152 1 21 1 400 200 25 8 10 4 1/17 2,5 5 4,0 0,29 215 1 21 1 500 250 25 8 10 4 1/17 2,5 5 4,0 0,4 2154 1 21 1 00 00 25 8 10 4 1/17 2,5 5 4,0 0,9 215 1 21 1 800 400 25 8 10 4 1/17 2,5 5 4,0 0,49 2158 1 21 1 1000 500 25 8 10 4 1/17 2,5 5 4,0 0,59 210 1 21 1 1200 00 25 8 10 4 1/17 2,5 5 4,0 0,9 211 1 21 1 00 150 28 8 10 7 1/17 2,5 5 4,0 0,24 212 1 21 1 400 200 28 8 10 7 1/17 2,5 5 4,0 0,29 21 1 21 1 500 250 28 8 10 7 1/17 2,5 5 4,0 0,4 214 1 21 1 00 00 28 8 10 7 1/17 2,5 5 4,0 0,9 21 1 21 1 800 400 28 8 10 7 1/17 2,5 5 4,0 0,49 218 1 21 1 1000 500 28 8 10 7 1/17 2,5 5 4,0 0,59 2170 1 21 1 1200 00 28 8 10 7 1/17 2,5 5 4,0 0,9 ONELED FITTINGS IMPROVED SEURITY IN LOSED POSITION GUIDE PIN FOR SSH ESSORIES - SEE SETION F D 2151-70 0/01

E-0 FITTING INSTRUTIONS IP NO. L KSET 2151 00 195 2152 400 295 215 500 95 2154 00 495 25 4 215 800 95 2158 1000 895 210 1200 1095 211 00 195 212 400 295 21 500 95 214 00 495 21 800 95 218 1000 895 2170 1200 1095 EXMPLE WOOD PROFILE 12 FIG. 1 17. 15 12 28 7 FIG. 2 SHOWN WITH OLT REEIVER IP NO. 218 28 22.5 5 2.5 7 (R) ESPGNOLETTE OLT TO E MOUNTED WITH OLTS POSITIONED S SHOWN (L) L 10 8 X 8 M5 42 PIN FOR GUIDNES IP NO.S 2180-82 R80 IP NO.S 211-70: NON-RNKED FE PLTE WOOD PROFILE: IP SYSTEM FITTINGS 17. 15 12 28 2 1 17, FIG. 4 10 12 9.5 FIG. SHOWN WITH IP SYSTEM OLT REEIVER IP NO. 2185 5 7 USE SREW NO. 4.0 MINTENNE: WHEN FITTING - LURITE THE MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/01

ESPGNOLETTES WITH SIDE OLTS IP N0.s 2701-10 & 2715-24 E-07 PREPRED FOR FRITION STY 12 SIDE OLTS IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2701 1 21 1 00 00 25 8 4 1/17 2,5 4,0 0,0 2702 1 21 1 720 0 25 8 4 1/17 2,5 4,0 0,5 270 1 21 1 820 410 25 8 4 1/17 2,5 4,0 0,40 2704 1 21 1 920 40 25 8 4 1/17 2,5 4,0 0,45 2705 1 21 1 1020 510 25 8 4 1/17 2,5 4,0 0,50 270 1 21 1 1120 50 25 8 4 1/17 2,5 4,0 0,55 2707 1 21 1 1220 10 25 8 4 1/17 2,5 4,0 0,0 2708 1 21 1 120 0 25 8 4 1/17 2,5 4,0 0,5 2709 1 21 1 1420 710 25 8 4 1/17 2,5 4,0 0,70 2710 1 21 1 1400 700 25 8 4 1/17 2,5 4,0 0,75 2715 1 21 1 00 00 28 8 7 1/17 2,5 4,0 0,0 271 1 21 1 720 0 28 8 7 1/17 2,5 4,0 0,5 2717 1 21 1 820 410 28 8 7 1/17 2,5 4,0 0,40 2718 1 21 1 920 40 28 8 7 1/17 2,5 4,0 0,45 2719 1 21 1 1020 510 28 8 7 1/17 2,5 4,0 0,50 D 2720 1 21 1 1120 50 28 8 7 1/17 2,5 4,0 0,55 2701-24 2721 1 21 1 1220 10 28 8 7 1/17 2,5 4,0 0,0 2722 1 21 1 120 0 28 8 7 1/17 2,5 4,0 0,5 272 1 21 1 1420 710 28 8 7 1/17 2,5 4,0 0,70 2724 1 21 1 1400 700 28 8 7 1/17 2,5 4,0 0,75 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION USLE FOR TOP HUNG WINDOWS LSO N E USED WITH FRITION STY NO.s 2810-21, EXTENTION PIEES NO.s 2580-97 ND ONNETION PIEES NO.s 2782-90 0/01

E-08 FITTING INSTRUTIONS IP NO. L D 2701 / 2715 00 00 140 12 2702 / 271 720 0 140 12 270 / 2717 820 410 190 12 2704 / 2718 920 40 240 12 2705 / 2719 1020 510 290 12 270 / 2720 1120 50 40 12 2707 / 2721 1220 10 90 12 2708 / 2722 120 0 440 12 2709 / 272 1420 710 490 12 2710 / 2724 1400 700 540 12 EXMPLE WOOD PROFILE FRME SSH 15 12.2 17. 12 2 9. 7 FIG. 2 D FIG. 1 FE PLTE: 1/17 SHORTENING POSSIILITIES: WITHOUT FRITION STY: 10 T THE TOP WITH SIDE OLTS OUT. 10 T THE OTTOM WITH SIDE OLTS IN. Ø4.2 4/7 FRITION STY T THE TOP: (TO MOUNT FRITION STY MIN. 0 HS TO E UT OF.) 0-110 T THE TOP WITH SIDE OLTS OUT. 10 T THE OTTOM WITH SIDE OLTS IN. 42 R80 L FRITION STY T THE OTTOM: (TO MOUNT FRITION STY MIN. 0 HS TO E UT OF) 10 T THE TOP WITH SIDE OLTS OUT. 0-110 T THE OTTOM WITH SIDE OLTS IN. 8 X 8 KSET 25/28 SHORTENING POSSIILITIES FOR IP NO..S 2701/2715 ND 2710/2724: WITHOUT FRITION STY: 70 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE TOP: 50 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE OTTOM: 70 T THE TOP WITH SIDE OLTS OUT. 50 T THE OTTOM WITH SIDE OLTS. USE SREW NO. 4. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. FIG. 15/02

E-09 ESPGNOLETTES WITH SIDE OLTS IP N0.s 2745-54 & 270-9 PREPRED FOR FRITION STY 15 SIDE OLTS IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2745 1 21 1 00 00 25 8 4 1/17 2,5 4,0 0,0 274 1 21 1 720 0 25 8 4 1/17 2,5 4,0 0,5 2747 1 21 1 820 410 25 8 4 1/17 2,5 4,0 0,40 2748 1 21 1 920 40 25 8 4 1/17 2,5 4,0 0,45 2749 1 21 1 1020 510 25 8 4 1/17 2,5 4,0 0,50 2750 1 21 1 1120 50 25 8 4 1/17 2,5 4,0 0,55 2751 1 21 1 1220 10 25 8 4 1/17 2,5 4,0 0,0 2752 1 21 1 120 0 25 8 4 1/17 2,5 4,0 0,5 275 1 21 1 1420 710 25 8 4 1/17 2,5 4,0 0,70 2754 1 21 1 1400 700 25 8 4 1/17 2,5 4,0 0,75 270 1 21 1 00 00 28 8 7 1/17 2,5 4,0 0,0 271 1 21 1 720 0 28 8 7 1/17 2,5 4,0 0,5 272 1 21 1 820 410 28 8 7 1/17 2,5 4,0 0,40 27 1 21 1 920 40 28 8 7 1/17 2,5 4,0 0,45 274 1 21 1 1020 510 28 8 7 1/17 2,5 4,0 0,50 D 2745-9 275 1 21 1 1120 50 28 8 7 1/17 2,5 4,0 0,55 27 1 21 1 1220 10 28 8 7 1/17 2,5 4,0 0,0 277 1 21 1 120 0 28 8 7 1/17 2,5 4,0 0,5 278 1 21 1 1420 710 28 8 7 1/17 2,5 4,0 0,70 279 1 21 1 1400 700 28 8 7 1/17 2,5 4,0 0,75 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION USLE FOR TOP HUNG WINDOWS LSO N E USED WITH FRITION STY NO.s 2810-21, EXTENTION PIEES NO.s 2580-97 ND ONNETION PIEES NO.s 2782-90 0/01

E-10 FITTING INSTRUTIONS IP NO. L D 2745 / 270 00 00 140 15 274 / 271 720 0 140 15 2747 / 272 820 410 190 15 2748 / 27 920 40 240 15 2749 / 274 1020 510 290 15 2750 / 275 1120 50 40 15 2751 / 27 1220 10 90 15 2752 / 277 120 0 440 15 275 / 278 1420 710 490 15 2754 / 279 1400 700 540 15 EXMPLE WOOD PROFILE FRME SSH 15 12.2 17. 12 2 9. 7 FIG. 2 D FIG. 1 FE PLTE: 1/17 SHORTENING POSSIILITIES: WITHOUT FRITION STY: 10 T THE TOP WITH SIDE OLTS OUT. 10 T THE OTTOM WITH SIDE OLTS IN. Ø4.2 4/7 FRITION STY T THE TOP: (TO MOUNT FRITION STY MIN. 0 HS TO E UT OF.) 0-110 T THE TOP WITH SIDE OLTS OUT. 10 T THE OTTOM WITH SIDE OLTS IN. 42 R80 L FRITION STY T THE OTTOM: (TO MOUNT FRITION STY MIN. 0 HS TO E UT OF) 10 T THE TOP WITH SIDE OLTS OUT. 0-110 T THE OTTOM WITH SIDE OLTS IN. 8 X 8 KSET 25/28 SHORTENING POSSIILITIES FOR IP NO..S 2745/270 ND 2754/279: WITHOUT FRITION STY: 70 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE TOP: 50 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE OTTOM: 70 T THE TOP WITH SIDE OLTS OUT. 50 T THE OTTOM WITH SIDE OLTS. USE SREW NO. 4. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. FIG. 15/02

E-11 ESPGNOLETTES WITH SIDE OLTS IP N0.s 2841-48 PREPRED FOR FRITION STY 12 SIDE OLTS IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRDPKING IN OXES OF 10 PIEES KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2841 1 21 1 440 220 25 8 4 1/17 2,5 4,0 0,2 2842 1 21 1 520 250 25 8 4 1/17 2,5 4,0 0,1 284 1 21 1 440 220 28 8 7 1/17 2,5 4,0 0,27 2844 1 21 1 520 250 28 8 7 1/17 2,5 4,0 0,2 PREPRED FOR FRITION STY 15 SIDE OLTS IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRDPKING IN OXES OF 10 PIEES KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2845 1 21 1 440 220 25 8 4 1/17 2,5 4,0 0,2 D 2841-48 284 1 21 1 520 250 25 8 4 1/17 2,5 4,0 0,1 2847 1 21 1 440 220 28 8 7 1/17 2,5 4,0 0,27 2848 1 21 1 520 250 28 8 7 1/17 2,5 4,0 0,2 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION USLE FOR TOP HUNG WINDOWS LSO N E USED WITH FRITION STY NO.s 2810-21, EXTENTION PIEES NO.s 2580-97 ND ONNETION PIEES NO.s 2782-90 07/02

E-12 FITTING INSTRUTIONS IP NO. L D E F G 2841 440 220 220 40 0 12 25 4 2842 520 250 270 90 110 12 25 4 284 440 220 220 40 0 12 28 7 2844 520 250 270 90 110 12 28 7 2845 440 220 220 40 0 15 25 4 284 520 250 270 90 110 15 25 4 E 2847 440 220 220 40 0 15 28 7 2848 520 250 270 90 110 15 28 7 FIG. 1 SHORTENING POSSIILITIES FOR IP NO. 2841+4+45+47: WITHOUT FRITION STY: 70 T THE TOP WITH SIDE OLTS OUT. 90 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE TOP: 50 T THE TOP WITH SIDE OLTS OUT. 90 T THE OTTOM WITH SIDE OLTS IN. Ø4.2 FRITION STY T THE OTTOM: 70 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. 8 X 8 SHORTENING POSSIILITIES FOR IP NO. 2842+44+4+48: WITHOUT FRITION STY: 70 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE TOP: 50 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE OTTOM: 70 T THE TOP WITH SIDE OLTS OUT. 50 T THE OTTOM WITH SIDE OLTS IN. FIG. 2 FRME SSH 12.2 17. 12 G D 42 L F R80 FEPLTE: 1/17 USE SREW NO. 4.0 15 FIG. 2 9. 7 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 07/02

E-1

E-14 FITTING INSTRUTIONS

ESPGNOLETTES WITH SIDE OLTS FOR PTIO DOORS IP N0.s 2551-5 E-15 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKING IN OXES OF 5 PIEES. L D E KSET PIN FEPLTE THIKNESS PLTE SREW PPROS. WEIGHT KG/SET 2551 1 21 1 2110 270 1005 1050 1540 17 40 8 1/17 2,5 4,0 1,08 255 1 21 1 2110 270 1005 1050 1750 17 40 8 1/17 2,5 4,0 1,10 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION 17 SIDE OLTS N E USED WITH FRITION STY NO.s 2820-2, EXTENTION PIEES NO.s 258 ND 2790 ND ONNETION PIEES NO.s 2782-90 ESSORIES - SEE SETION F E DORNMSS 40 Ø4.2 42 8 X 8 R80 L D 49 2551-5 0/01

E-1 FITTING INSTRUTIONS IP NO. L D E FEPLTE 2551 2110 270 1005 1050 1540 17 1/17 255 2110 270 1005 1050 1750 17 1/17 FIG. 1 SHORTENING POSSIILITIES (T THE TOP): IP NO. 2551: WITHOUT RESTRITOR: 475 WITH SIDEOLTS OUT. WITH RESTRITOR: MIN. 25 WITH SIDEOLTS OUT. MX. 455 WITH SIDEOLTS OUT. E IP NO. 255: WITHOUT RESTRITOR: 255 WITH SIDEOLTS OUT. WITH RESTRITOR: MIN. 5 WITH SIDEOLTS OUT. MX. 25 WITH SIDEOLTS OUT. KSET 40 Ø4.2 USE SREW NO. 4.0 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 8 X 8 EXMPLE WOOD PROFILE FRME SSH 12.2 17. 12 42 49 R80 15 D L 9. 2 7 FIG. FIG. 2 0/01

E-17 ESPGNOLETTES 2-PRTS WITH SIDE OLTS FOR PTIO DOORS IP N0. 241 &IP NO.s 242-7 ESPGNOLETTE LOWER PRT ORDERING NR. MTERIL SURFE IP NO. STEEL SQURE EDGES ELETROPLED STNDRD PKING IN OXES OF 25 PIEES D KSET PIN FEPLTE THIKNISS PLTE SREW PPROX. WEIGHT KG / EH 241 1 21 1 120 270 1000 1050 40 8 1 2,5 4,0 0,7 EXTENTION PIEES UPPER PRT IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES E F FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 242 1 21 1 520 270 1 2,5 4,0 0,2 24 1 21 1 70 270 1 2,5 4,0 0,2 244 1 21 1 820 270 1 2,5 4,0 0,8 245 1 21 1 970 270 1 2,5 4,0 0,44 24 1 21 1 1120 270 1 2,5 4,0 0,50 D 247 1 21 1 1270 270 1 2,5 4,0 0,5 E F ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION 17 SIDE OLTS N E FITTED TO NY DOORS SIZE ON SIGHT N E USED WITH FRITION STY NO.s 2820-2 ND EXTENTION PIEES NO.s 2581, 2584, 2587, 2590, 259 & 259 (FEPLTE 1/17 ) - SEE SETION F ESSORIES - SEE SETION F 241 242-7 15/02

E-18 FITTING INSTRUTIONS IP NO. L D FEPLTE 241 120 270 1000 1050 17 1 IP NO. 242-7 F SHORTENING POSSIILITIES: THE TOP PRTS OF THE ESPGNOLETTE RE VILLE IN LENGTHS 520, 70, 820, 970, 1120 & 1270. THEY N LL E SHORTENED UP TO 150, WHIH GIVES THE POSSIILITY OF ESPGNOLETTES FROM 100-2500. USE SREW NO. 4,0. TO ENSURE THE FUNTION OF THE ESPGNOLETTE, PLESE MKE SURE WHEN MOUNTING THT THE FEPLTE IS NOT DEFORMED. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 42 KSET 40 Ø4.2 8 X 8 R80 EXMPLE WOOD PROFILE 49 FRME SSH 15 12.2 1/17. 12 D FIG. 1 E 9. 2 7 FIG. 2 FIG. 15/02

ESPGNOLETTES 2-PRTS WITH SIDE OLTS FOR PTIO DOORS IP N0. 2481 &IP NO.s 2482-87 E-19 ESPGNOLETTE LOWER PRT ORDERING NR. MTERIL SURFE IP NO. STEEL SQURE EDGES ELETROPLED STNDRD PKING IN OXES OF 25 PIEES D KSET PIN FEPLTE THIKNISS PLTE SREW PPROX. WEIGHT KG / EH 2481 1 21 1 120 200 1075 1000 40 8 1 2,5 4,0 0,7 EXTENTION PIEES UPPER PRT IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES E F FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2482 1 21 1 520 200 1 2,5 4,0 0,2 248 1 21 1 70 200 1 2,5 4,0 0,2 2484 1 21 1 820 200 1 2,5 4,0 0,8 D 2485 1 21 1 970 200 1 2,5 4,0 0,44 248 1 21 1 1120 200 1 2,5 4,0 0,50 2487 1 21 1 1270 200 1 2,5 4,0 0,5 E F ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION 17 SIDE OLTS N E FITTED TO NY DOORS SIZE ON SIGHT N E USED WITH FRITION STY NO.s 2820-2 ND EXTENTION PIEES NO.s 2581, 2584, 2587, 2590, 259 & 259 (FEPLTE 1/17 ) - SEE SETION F ESSORIES - SEE SETION F 2481 2482-87 15/02

E-20 FITTING INSTRUTIONS IP NO. L D FEPLTE 2481 120 200 1075 1000 17 1 IP NO. 2482-87 F FIG. 1 SHORTENING POSSIILITIES: THE TOP PRTS OF THE ESPGNOLETTE RE VILLE IN LENGTHS 520, 70, 820, 970, 1120 & 1270. THEY N LL E SHORTENED UP TO 150, WHIH GIVES THE POSSIILITY OF ESPGNOLETTES FROM 100-2500. USE SREW NO. 4,0. TO ENSURE THE FUNTION OF THE ESPGNOLETTE, PLESE MKE SURE WHEN MOUNTING THT THE FEPLTE IS NOT DEFORMED. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. KSET 40 Ø4.2 EXMPLE WOOD PROFILE 42 8 X 8 R80 FRME 49 SSH D 15 12.2 1/17. 12 E 9. 2 7 FIG. 2 FIG. 15/02

ESPGNOLETTES 2-PRTS WITH SIDE OLTS FOR PTIO DOORS IP N0. 2498 &IP NO.s 2482-87 E-21 ESPGNOLETTE LOWER PRT IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 25 PIEES D KSET PIN FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2498 1 21 1 120 200 95 1000 40 8 1 2,5 4,0 0,7 EXTENTION PIEES UPPER PRT IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES E F FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 2482 1 21 1 520 200 1 2,5 4,0 0,2 248 1 21 1 70 200 1 2,5 4,0 0,2 2484 1 21 1 820 200 1 2,5 4,0 0,8 2485 1 21 1 970 200 1 2,5 4,0 0,44 248 1 21 1 1120 200 1 2,5 4,0 0,50 D E F 2487 1 21 1 1270 200 1 2,5 4,0 0,5 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION 17 SIDE OLTS N E FITTED TO NY DOORS SIZE ON SIGHT N E USED WITH FRITION STY NO.s 2820-2 ND EXTENTION PIEES NO.s 2581, 2584, 2587, 2590, 259 & 259 (FEPLTE 1/17 ) - SEE SETION F ESSORIES - SEE SETION F 2498 2482-87 0/01

E-22 FITTING INSTRUTIONS IP NO. L D FEPLTE 2498 120 200 95 1000 17 1 IP NO. 2482-87 F FIG. 1 SHORTENING POSSIILITIES: THE TOP PRTS OF THE ESPGNOLETTE RE VILLE IN LENGTHS 520, 70, 820, 970, 1120 & 1270. THEY N LL E SHORTENED UP TO 150, WHIH GIVES THE POSSIILITY OF ESPGNOLETTES FROM 100-2500. USE SREW NO. 4,0. TO ENSURE THE FUNTION OF THE ESPGNOLETTE, PLESE MKE SURE WHEN MOUNTING THT THE FEPLTE IS NOT DEFORMED. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 42 KSET 40 Ø4.2 8 X 8 R80 EXMPLE WOOD PROFILE 49 FRME SSH 15 D 12.2 1/17. 12 E 9. 2 7 FIG. 2 FIG. 15/02

E-2 ESPGNOLETTES WITH SIDE OLTS IP N0.s 211-4 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES 211 1 21 1 720 250 28 8 7 1 2,5 4,0 0,5 KSET PIN D FEPLTE THIKNESS PLTE SREW PPROX. WEIGHT KG / EH 212 1 21 1 920 250 28 8 7 1 2,5 4,0 0,45 21 1 21 1 1120 250 28 8 7 1 2,5 4,0 0,55 214 1 21 1 120 250 28 8 7 1 2,5 4,0 0,5 TO E USED WHERE LOW HNDLE HEIGHT IS REQUIRED - FROM 10 FROM OTTOM OF SSH ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION N E USED WITH FRITION STY NO.s 2810-21, EXTENTION PIE- ES NO.s 2580-97 ND ONNETION PIEES NO.s 2782-90 D ESSORIES - SEE SETION F 211-4 12/12

E-24 FITTING INSTRUTIONS IP NO. L D E F G 211 720 250 470 90 250 15 28 7 212 920 250 70 90 450 15 28 7 21 1120 250 870 90 50 15 28 7 214 120 250 1070 90 850 15 28 7 FIG. 1 SHORTENING POSSIILITIES FOR IP NO. 211-4: WITHOUT FRITION STY: 10 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. FRITION STY T THE TOP: (TO MOUNT FRITION STY MIN. 0 HS TO E UT OF.) 0-110 T THE TOP WITH SIDE OLTS OUT. 70 T THE OTTOM WITH SIDE OLTS IN. E FRITION STY T THE OTTOM: 10 T THE TOP WITH SIDE OLTS OUT. 50 T THE OTTOM WITH SIDE OLTS IN. Ø4,2 G 8 X 8 FRME SSH 12.2 2 D 42 L R80 EXMPLE WOOD PROFILE F 15 17. 12 USE SREW NO. 4.0 9. FEPLTE: 1/17 FIG. 2 7 FIG. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/02

E-25 ESPGNOLETTES WITH MUSHROOM HED OLTS IP NO.s 021-0 & 041-50 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED INDUSTRY PKING IN OXES OF 25 PS. KSET FOR PIN D FEPLTE THIKNESS PLTE SREW WEIGHT PPROX. KGS / 100 PIEES 021 1 21 2 00 150 28 8 7 1 2,5 4,0 0,20 022 1 21 2 400 200 28 8 7 1 2,5 4,0 0,24 024 1 21 2 00 00 28 8 7 1 2,5 4,0 0,4 02 1 21 2 800 400 28 8 7 1 2,5 4,0 0,44 028 1 21 2 1000 500 28 8 7 1 2,5 4,0 0,54 00 1 21 2 1200 00 28 8 7 1 2,5 4,0 0,4 041 1 21 2 00 150 25 8 4 1 2,5 4,0 0,20 042 1 21 2 400 200 25 8 4 1 2,5 4,0 0,24 044 1 21 2 00 00 25 8 4 1 2,5 4,0 0,4 04 1 21 2 800 400 25 8 4 1 2,5 4,0 0,44 048 1 21 2 1000 500 25 8 4 1 2,5 4,0 0,54 050 1 21 2 1200 00 25 8 4 1 2,5 4,0 0,4 ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION GUIDING PIN FOR SSH DJUSTLE MUSHROOM HED OLTS ESSORIES - SEE SETION F D 021-0 + 041-50 17/11

E-2 FITTING INSTRUTIONS IP NO. L 021 00 195 KSET DJUSTLE 022 400 295 024 00 495 02 800 95 028 1000 895 00 1200 1095 041 00 195 042 400 295 044 00 495 04 800 95 048 1000 895 050 1200 1095 15 FIG. 1 17. 12 28 25 EXMPLE WOOD PROFILE 2 Ø4.2 8 X 8 7-8 5 (R) RIGHT THE ESPGNOLETTE IS FITTED S SHOWN - SEEN FROM THE HNDLE SIDE LEFT (L) L 42 4 R80 PIN FOR GUIDNE IP NO.S 2180-82 7.7 7 49 FIG. 2 SHOWN WITH REEIVER IP NO. 2190 1 USE SREW NO. 4.0. FIG. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HERFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 17/11

E-27 ESPGNOLETTES WITH MUSHROOM HED OLTS IP NO.s 051-0 IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED INDUSTRY PKING IN OXES OF 25 PS. KSET FOR PIN D FEPLTE THIKNESS PLTE SREW WEIGHT PPROX. KGS / 100 PIEES 051 1 21 2 00 150 25 8 4 1 2,5 4,0 0,20 052 1 21 2 400 200 25 8 4 1 2,5 4,0 0,24 054 1 21 2 00 00 25 8 4 1 2,5 4,0 0,4 05 1 21 2 800 400 25 8 4 1 2,5 4,0 0,44 058 1 21 2 1000 500 25 8 4 1 2,5 4,0 0,54 00 1 21 2 1200 00 25 8 4 1 2,5 4,0 0,4 1 FEPLTE ONSELED FITTINGS IMPROVED SEURITY IN LOSED POSITION GUIDE PIN IP NO. 081 - IS OPTIONL DJUSTLE MUSHROOM HED OLTS REEIVERS IP NO. 2190-92 - SEE SETION F. GUIDE PIN D 051-0 081 IP NO. MTERIL PLSTI W/O SPEIFITION SURFE GRPHITE INDUSTRY PKING IN OXES OF 100 PS. SREW WEIGHT PPROX. KGS / 100 PIEES 081 9 0 57 2 8 8, 4,0 0,05 12/12

E-28 FITTING INSTRUTIONS IP NO. L 051 00 195 DJUSTLE 052 400 295 REEIVER IP NO. 2190 054 00 495 05 800 95 058 1000 895 00 1200 1095 FIG. 1 EXMPLE WOOD PROFILE GUIDE PIN IP NO. 081 (OPTIONL) FIG. 4 WHEN USING IP GUIDE PIN NO. 081, THE PIN MUST E PLED IN THE SREWHOLE JUST TO THE RIGHT SIDE OF THE RIGHT LOKING POINT (SEEN FROM THE OUTSIDE) (R) RIGHT THE ESPGNOLETTE IS FITTED S SHOWN - SEEN FROM THE HNDLE SIDE LEFT (L) L 42 Ø4.2 8 X 8 KSET 25 4 R80 15 17. 2 12 7-8 7.7 5 FIG. 2 SHOWN WITH REEIVER IP NO. 2190 49 7 1 USE SREW NO. 4.0. FIG. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HERFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/01

FRITION STYS ND FRME FIXTURES IP NO.s 2810-18 & 2797-99 F-01 IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES SSH WIDTH SREW PPROX. WEIGHT KG / EH 2810 1 0 21 1 500 250 0-480 1,0 0,18 2811 1 0 21 1 50 0 481-90 1,0 0,25 2812 1 0 21 1 750 45 91-900 1,0 0,4 281 1 0 21 1 1025 45 901-1100 1,0 0,4 2815 1 0 21 1 500 250 0-480 1,0 0,18 2810-18 D 281 1 0 21 1 50 0 481-90 1,0 0,25 2817 1 0 21 1 750 45 91-900 1,0 0,4 2818 1 0 21 1 1025 45 901-1100 1,0 0,4 2810-1: TO E USED IN TOP SSH 2815-18: TO E USED IN OTTOM SSH MTERIL SURFE IP NO. PLSTI WITHOUT SPEIFIKTION GREY WHITE STNDRD PKING IN OXES OF 10 PIEXES. 2797 2798-99 7 D SREW WEIGHT PPROX. KGS / 100 PS. 2797 0 0 00-1 45 1 8,5 12 4,0 0,20 2798 0 0-00 1 45 1,1-4,0 0,20 2799 0 0-00 1 45 1 10,7-4,0 0,40 2797: TO E USED IN TOP FRME 2798-99: TO E USED IN OTTOM FRME 2797 2798-99 1/05

F-02 FITTING INSTRUTIONS 90 D IP NO. 2797 FRME FITTING INSTRUTIONS: 1. LUMINIUM RIL WITH RM IS MOUNTED IN THE TOP OF THE SSH (2810-1) OR T THE OTTOM OF THE SSH (2815-18). USE 4 PS SREW NO.. FRME 12 7 2. THE PLSTI FRME FIXTURE IS MOUNTED IN THE TOP OF THE FRME (2797) OR T THE OTTOM OF THE FRME (2798-99). USE 2 PS. SREW NO. 4.. THE RM IS PRESSED IN PLE IN THE FRME FIXTURE. SSH FIG. 1 IP NO.S 2810-1 FOR THE TOP D IP NO.S 2798-99 FIG. 90 SSH FRME 17. 12.2 2 SSH 17. 12.2 2 9. 9. 9. SSH WHEN THE OPENING NGEL IS MORE THN 90 0 MEHNIL RESTRITOR WHIH PREVENTS THE DOOR FROM OPENING MORE THN 90 0 MUST E FITTED. 12.2 17. 2 IP NO.S 2810-1 FIG. 4 IP NO. SSH WIDTH D 2810 0-480 250 15 110 102 2811 481-90 0 90 200 152 2812 91-900 45 195 0 20 281 901-1100 45 05 450 280 2815 0-480 250 15 110 102 281 481-90 0 90 200 152 2817 91-900 45 195 0 20 2818 901-1100 45 05 450 280 MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. SSH FIG. 2 IP NO.S 2815-18 FOR THE OTTOM 2828 49 FRME 49 FRME FIG. 5 FIG. 7 7 15/02

FRITION STYS FOR DOORS IP NO.s 2820-2 F-0 MTERIL SURFE IP NO. STEEL LEFT RIGHT ELETROPLTED STNDRD PKNING IN OXES OF 10 PIEES SSH WIDTH SREW PPROX. WEIGHT KG / EH 2820-21 LEFT 2820 1 7 8 21 1 750 45 91-900 1,0 0,4 2821 1 7 8 21 1 1025 45 901-1100 1,0 0,4 2822 1 7 8 21 1 750 45 91-900 1,0 0,5 282 1 7 8 21 1 1025 45 901-1100 1,0 0,44 FRME FIXTURES IP NO. 2797, SEE PGE F-01 2822-2 LEFT 15/02

F-04 FITTING INSTRUTIONS D IP NO. 2797 IP NO. SSH WIDTH D 2820 91-900 45 195 0 20 90 FRME 2821 901-1100 45 05 450 280 2822 91-900 45 195 0 20 282 901-1100 45 05 450 280 FIG. FITTING INSTRUTIONS: 1. LUMINIUM RIL WITH RM IS MOUNTED IN THE TOP OF THE SSH. USE 4 PS SREW NO.. SSH FIG. 1 IP NO. 2820-21 LEFT THE FRITION STY FOR DOORS OMES S LEFT ND RIGHT USE LEFT FOR LEFTHUNG DOOR. D FIXED FRME FIXTURE 2. 21820-21: THE PLSTI FRME FIXTURE IS MOUN- TED IN THE TOP OF THE FRME. USE 2 PS. SREW NO. 4. - SEE FIG. 1. 21822-2: THE FIXED FRME FIXTURE IS MOUN- TED IN THE TOP OF THE FRME. USE 2 PS. SREW NO. 4. - SEE FIG. 2.. 21820-21: THE RM IS PRESSED IN PLE IN THE FRME FIXTURE. WHEN THE OPENING NGEL IS MORE THN 90 0 MEHNIL RESTRITOR WHIH PREVENTS THE DOOR FROM OPENING MORE THN 90 0 MUST E FITTED. EXMPLE WOOD PROFILE FRME 12 90 FRME 12.2 17. 4. 9. 7 2 SSH FIG. 4 SSH FIG. 2 IP NO. 2822-2 LEFT THE FRITION STY FOR DOORS OMES S LEFT ND RIGHT USE LEFT FOR LEFTHUNG DOOR. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 15/02

F-05 ONNETION PIEES IP N0.s 2782-90 2782-8 2785-8 IP NO. MTERIL SURFE STEEL/LLOY WITHOUT SPEIFIKTION ELETROPLTED STNDRD PKING IN OXES OF 10 PIEES SREW PPROX. WEIGHT KG / EH 2785 0 0 21 1 1 4,0 0,07 278 0 0 21 1 1 4,0 0,07 2782 0 0 21 1 100 1 4,0 0,09 278 0 0 21 1 100 1 4,0 0,09 2789 0 0 21 1 10 1 4,0 0,11 2790 0 0 21 1 10 1 4,0 0,11 278, 278 ND 2789: TO E USED T THE OTTOM 2782, 2785 ND 2790: TO E USED T THE TOP 2789-90 0/01

F-0 FITTING INSTRUTIONS ONNETION PIEE PIN PLTE FIG. 1 IP NO. 2790 FOR TOP SIDE- ND TOP FRME 12 7 ESPGNOLETTE 10 FIG. 2 IP NO. 2789 FOR OTTTOM UPPER EDGE 12.2 17. 2 LOWER EDGE FIG. 7 9. PLTE FIG. IP NO. 2785 FOR TOP SIDE- ND TOP SSH ONNETION PIEE FIG. 4 IP NO. 278 FOR OTTTOM ESPGNOLETTE FIG. 8 OTTOM SSH 17. 12.2 2 9. 100 ESPGNOLETTE OTTOM FRME 49 28 7 PLTE FIG. 5 IP NO. 2782 FOR TOP OTTOM SSH ONNETION PIEE FIG. IP NO. 278 FOR OTTTOM LOWER EDGE FIG. 9 17. 12.2 2 9. FITTING INSTRUTIONS: 1. THE ONNETION PIEE IS PLED IN THE OTTOM (278/8/89) OF THE SIDE SSH OR IN THE TOP (2782/85/90) OF THE SIDE SSH, SO THT THE UPPER/LOWER EDGE IS IN LEVEL WITH THE LOWER/UPPER EDGE OF THE SSH. USE SREW 4,0 X 50. IP NO. 2782/85: WHEN MOUNTED T THE TOP THE ONNE- TION PIEE HS TO E FULLY EXTRTED. IP NO. 278/8: WHEN MOUNTED T THE OTTOM THE ON- NETION PEIE HS TO E FULLY OMPRESSED. 2. THE PLTE IS TURNED FOR MOUNTING OF ESPGNOLETTE.. THE EXPGNOLETTE (FOR EXMPLE IP NO. 2702) IS SET IN OPEN POSITION (SIDE OLTS IN) THE TOOTHED PRT OF THE ESPGNOLETTE IS ONNETED WITH THE ONNETION PIEE, SO THT THE FE PLTE OF THE ESPGNOLETTE FITS TIGHTLY GINST THE FE PLTE OF THE ONNETION PIEE. 4. PLTE ON ONNETION PIEE IS TURNED K. 5. FRITION STY IS MOUNTED, IP NO.S 2791-9.. WHEN THE ESPGNOLETTE IS TIVTED THE MOUNTING SEURITY PIN RKES OFF (IP NO: 2810-21) ND THE SYSTEM IS NOW FULLY OPERTIONL. OTTOM FRME 49 28 7 PLESE NOTE! WHEN MOUNTING THE ONNETION PIEE IN THE ESPGNOLETTE HS TO E OPENED (SIDE OLTS IN) EFORE SHORTENING. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/ MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT GRESE THE LUMINIUM RILS. SEE LSO SETION H. 0/01

F-07 ESSORIES FOR SIDE OLT ESPGNOLETTES 2248-50 2448-50 * 285 2252+0 2854 2452-0 * REEIVERS 2259 IP NO. MTERIL LLOY STEEL STINLESS STEEL WITHOUT SPEIFITION SURFE ELETROPLTED UNMHINED STNDRD PKING IN OXES OF 20 PIEES STNDRD PKING IN OXES OF 25 PIEES INDUSTRY PKING IN OXES OF 100 PIEES THIKNESS PLTE SREW WEIGHT PPROX. KG / 100 PIEES 2248 1-0 21 - - 1-79,5 17 21 1,5,5 2,0 2249 1-0 21 - - 1-78,5 12 2 1,5,5 2,0 2250 1-0 21 - - 1-78,5 12 24 1,5,5 2,0 2252 1-0 21 - - 1-78,5 12 24 1,5,5 2,0 2259 1-0 21 - - 1-50 47-1,5,5 2,0 220 1-0 21 - - 1-79,5 17 21 1,5,5 2,0 229 * 229 1 - - 0 21 - - 1 2 4 25-7 4,0,0 2270 - - 8 0-8 1 - - 4 8,5 18 1,75 4,0 2, 2448 1-0 21 - - 1-79,5 17 21 1,5,5 2,0 2450 1-0 21 - - 1-78,5 12 24 1,5,5 2,0 2452 1-0 21 - - 1-78,5 12 24 1,5,5 2,0 240 1-0 21 - - 1-79,5 17 21 1,5,5 2,0 285 1-0 21 - - 1-80,5 12 8 1,5,5 2, 2854 1 0 21 - - 1-80,5 12 8 1,5,5 2,2 2270 * * THESE REEIVERS HVE EEN DESIGNED SPEILLY FOR THE ESPGNOLETTE PRO- GRE IP NO. 2701-9/2841-48 ND THE REEIVERS IP NO. 229 OR 2270 HS TO E USED WHEN THE ESPGNOLETTE IS MOUNTED IN THE OTTOM SSH. 15/02

F-08 ESSORIES FOR FITTING ROLLER OLT INSTRUTIONS ESPGNOLETTES GUIDES IP NO. MTERIL PLSTI WITHOUT SPEIFIKTION SURFE ROWN WHITE STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 100 PIEES SREW WEIGTH PPROX. KG / EH 2180-82 2180 9 0-5 1-9 0 52 5-2 8 0 8 4,0 0,005 2181 9 0-5 1-9 0 52 5-2 8 0 11 4,0 0,00 2182 9 0-5 1-8 0 1 4,0 0,008 REEIVERS D MTERIL SURFE IP NO. LLOY WITHOUT SPEIFIKTION ELETROPLTED STNDRD PKING IN OXES OF 20 PIEES D SREW WEIGTH PPROX. KG / EH 218 218 1 0 21 1 4 18 11 12 4,0 0,01 2184 1 0 21 1 9 19,5 8,5 4,0 0,022 2185 1 0 21 1 25 5 10 12 4,0 0,015 218 1 0 21 1 9 19 8,5 10,5 4,0 0,022 2187 1 0 21 1 9 20 8 8 4,0 0,022 D D D 2185 2184 & 218 2187 15/02

F-09 ESSORIES FOR MUSHROOM HED OLT ESPGNOLETTES GUIDES IP NO. MTERIL PLSTI WITHOUT SPEIFIKTION SURFE ROWN WHITE STNDRD PKING IN OXES OF 10 PIEES INDUSTRY PKING IN OXES OF 100 PIEES SREW WEIGTH PPROX. KG / EH 2180-82 2180 9 0-5 1-9 0 52 5-2 8 0 8 4,0 0,005 2181 9 0-5 1-9 0 52 5-2 8 0 11 4,0 0,00 2182 9 0-5 1-8 0 1 4,0 0,008 REEIVERS D MTERIL SURFE 2190 D IP NO. STINLESS STEEL WITHOUT SPEIFIKTION UNMHINED STNDRD PKING IN OXES OF 25 PIEES INDUSTRY PKING IN OXES OF 100 PIEES D SREW WEIGTH PPROX. KG / 100 PIEES 2190 8 0 8 1 2 2,5 40 7 8 4,0 0,024 2191 8 0 8-2 1 40 7 10 4,0 0,024 2191 2192 8 0 8 1 2 44 40 7 8 4,0 0,02 D 2192 15/02

F-10 ESSORIES FOR FITTING ESPGNOLETTES INSTRUTIONS 2220 2221 2222 GUIDE PLTE ND REEIVER IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELETROPLTED STNDRD PKING IN OXES OF 20 PIEES STNDRD PKING IN OXES OF 50 PIEES THIKNESS PLTE SREW WEIGHT PPROX. KG / EH 2521 2220 1 0 21-1 85 17 4,0 0,0 2221 1 0 21-1 85 17 4,0 0,0 2222 1 0 21-1 47 40 2,5 0,0 2521 1 0 21 1-5 17 1,5,0 0,01 15/02

F-11 EXTENSION PIEES IP NO.s 2580-9 WITH SIDEOLTS TOP WITHOUT SIDEOLTS IP NO. MTERIL STEEL SQURE EDGES SURFE ELETROPLTED STNDRD PKING IN OXES OF 10 PIEES SIDEOLTS FEPLTE THIKNESS PLTE SREW POSITIONING WEIGHT PPROX. KG / EH 2580+ 8+8+89+ 92+95+97 WITH SIDEOLTS OTTOM 2582+ 85+88 2580 1 21 1 250 12 1 2,5 4,0 TOP 0,1 2581 1 21 1 250 12 1 2,5 4,0 OTTOM 0,1 2582 1 21 1 250-1 2,5 4,0 TOP/OTTOM 0,1 258 1 21 1 80 12 1 2,5 4,0 TOP 0,20 2584 1 21 1 80 12 1 2,5 4,0 OTTOM 0,20 2585 1 21 1 80-1 2,5 4,0 TOP/OTTOM 0,20 258 1 21 1 500 12 1 2,5 4,0 TOP 0,2 2587 1 21 1 500 12 1 2,5 4,0 OTTOM 0,2 2588 1 21 1 500-1 2,5 4,0 TOP/OTTOM 0,2 2589 1 21 1 250 15 1 2,5 4,0 TOP 0,1 2590 1 21 1 250 15 1 2,5 4,0 OTTOM 0,1 2592 1 21 1 80 15 1 2,5 4,0 TOP 0,20 259 1 21 1 80 15 1 2,5 4,0 OTTOM 0,20 2595 1 21 1 500 15 1 2,5 4,0 TOP 0,2 259 1 21 1 500 15 1 2,5 4,0 OTTOM 0,2 2597 1 21 1 1000 15 1 2,5 4,0 TOP 0,48 2581+ 84+87+90+ 9+9 15/11

F-12 FITTING INSTRUTIONS IP NO. POSITION FEPLTE 2580 250 12 90 TOP 1 2581 250 12 90 OTTOM 1 2582 250 - - TOP / OTTOM 1 258 80 12 220 TOP 1 2584 80 12 220 OTTOM 1 2585 80 - - TOP / OTTOM 1 258 500 12 40 TOP 1 2587 500 12 40 OTTOM 1 2588 500 - - TOP / OTTOM 1 2589 250 15 90 TOP 1 2590 250 15 90 OTTOM 1 2592 80 15 220 TOP 1 259 80 15 220 OTTOM 1 2595 500 15 40 TOP 1 259 500 15 40 OTTOM 1 2597 1000 15 840 TOP 1 FIG. 1 SHORTENING POSSIILITIES: WITHOUT FRITION STY: 70 T TOP/OTTOM WITH SIDE OLTS OUT/IN. WITH FRITION STY: 50 T TOP/OTTOM WITH SIDE OLTS OUT/IN. USE SREW NO. 4,0. EXMPLE WOODPROFILE FRME SSH 15 12.2 17. 12 2 9. 7 OTTOM TOP FIG. 2 FIG. TOP/OTTOM MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. SEE LSO SETION H. 15/11

F-1 SHOOTOLTS EXTENSIONS IP NO. 2780 MTERIL SURFE IP NO. LLOY WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 5 SETS FEPLTE SREW WEIGHT PPROX. KG / SET 2780 0 0 21 1 10 1 1 4,0 0,2 2780 SET FOR MOUNTING IN TOP/OTTOM OR IN RIGHT/LEFT SIDES 1/0

F-14 HNDLES FITTING FOR WINDOW INSTRUTIONS ESPGNOLETTES HNDLES IP NO. MTERIL. LLOY LEFT RIGHT SURFE DULL ROME ROME STNDRDPKING IN OXES OF 10 PS. PIN DISTNE ETWEEN SREWHOLES LENGHT OF PIN HOLES FOR MSHINE SREWS / WOODEN SREWS WEIGHT PPROX. KG / PIEES 2228 0 7 8 80-1 8 42 4 M5 / 4,0 0,15 2229 0 7 8-81 1 8 42 4 M5 / 4,0 0,15 22 0 7 8 80-1 7 42 4 M5 / 4,0 0,15 224 0 7 8-81 1 7 42 4 M5 / 4,0 0,15 2228-4 RIGHT SFETY LOK MTERIL SURFE IP NO. STEEL W/O SPEIFIKTION DULL ROME ROME STNDRDPKING IN OXES OF 5 PS. HOLE 228 1 0 80 81 1 8 X 8 228 FOR HNDLES 2228-29+-4 1/09

G-01 DJUSTLE FRITION STY IP N0. 2127 IP NO. MTERIL STEEL WITHOUT SPEIFITION SURFE ELETROPLTED STNDRD PKING IN OXES OF 25 PS. 2127 1 0 21 1 12 20 17 x 4,0 0,14 MTERIL SREW PPROX. WEIGHT KG / PS. ONELED FITTING OPENS UP TILL 100 FRITION IN LL POSITIONS DJUSTLE FRITION NODIZED LUMINIUM RIL FITTING INSTRUTIONS 100 20 EXMLE WOOD PROFILE TOP FRME 12 7 DJUSTLE FRITION 15 17. FIG. 1 40 TOP SSH FIG. 2 FIG. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 0/01

G-02 DJUSTLE FRITION STY IP N0. 22411 MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPLTED STNDRD PKING IN OXES OF 25 PS. MTERIL SREW PPROX. WEIGHT KG / PS. 22411 1 0 21 1 12 400 17 X 4,0 0,21 ONELED FITTING OPENS UP TILL 100 FRITION IN LL POSITIONS DJUSTLE FRITION NODIZED LUMINIUM RIL FITTING INSTRUTIONS 250 400 EXMLE WOOD PROFILE TOP FRME 12 7 4. DJUSTLE FRITION 17. 200 40 FIG. 1 DOOR /TOP SSH FIG. 2 FIG. MINTENNE: THE FITTINGS RE NOT TO E PINTED. TEST THE OPERTION FROM TIME TO TIME. WHEN MOUNTING - LURITE THE PIVOT/MOVLE METL PRTS OF THE MEHNISM WHILE TIVTING REPETEDLY. HEREFTER LURITE MINIMUM TWIE YER. DO NOT LURITE THE LUMINIUM RILS. SEE LSO SETION H. 0/01

G-0 ESSORIES FOR IP SYSTEM FITTINGS OUPLING HINGES IP NO.s 1241-4 SUPPORT FITTING IP NO. 21221 SUPPORT FITTING IP NO. 21222 REEIVER FOR 21221 IP NO. 2122 SUPPORT FITTING IP NO. 21225 GUIDE LOKS FOR SSHES/ DOORS IP NO. 220-1 LOSING TH IP NO. 2140 ENTER HINGE IP NO. 21541 MTERIL SURFE IP NO. LUMINIUM STEEL STEEL W/ RSS PIN STEEL W/ LOOSE STEEL PIN PLSTI WIHTOUT SPEIFIKTION SQURE EDGES LEFT RIGHT NODIZED ELETROPLTED ELETROPLTED YELLEOW WHITE GLVNIZED STNDRD PKING IN OXES OF 5 SETS STNDRD PKING IN OXES OF 20 PIEES STNDRD PKING IN OXES OF 25 PIEES INDUSTRY PKING IN OXES OF 100 PIEES HINGED NGLE RKETS IP NO.s 21552+2 1241 - - 5 - - - - - - 25 - - - 1 - - 124 - - - - - - - - 21 - - - - - - 2 - - - - - - - - - 25 - - - 1 - - 21221-1 - - - 0 - - - - 21 25 - - - - 1-21222 0 - - - - 0 - - - 00 - - - - - - 1-2122 - 1 - - - 0 - - - - 21 - - - - - 1-21225 0 - - - - 0 - - - 00 - - - - - - 1-2140 - 1 - - - 0 - - - - - 25 - - - 1 - - 21541-1 - - - 0 - - - - - - - 87 1 - - - 21552-1 - - - - - 7 8 - - - - 87 1 - - - 21554-1 - - - - - 7 8 - - - - 87 1 - - - 2152-1 - - - - - 7 8 - - - - 87 1 - - - 2154-1 - - - - - 7 8 - - - - 87 1 - - - 220 - - - - 9 0 - - - - - - 5 - - 1 - - 221 - - - - 9 0 - - - - - - 5 - - 1 - - HINGED NGLE RKETS IP NO.s 21554+4 1/02

G-04 ESSORIES FOR FITTING IP SYSTEM INSTRUTIONS FITTINGS REEIVER IP NO. 240 FLUSH OLT IP NO. 201 FLUSH OLT IP NO. 20 FLUSH OLT IP NO. 205 FLUSH OLT IP NO.S 208-09 WINDOW STY IP NO. 2118 MTERIL SURFE THREDED PLTE FOR DOOR HINGE IP NO. 12721 IP NO. STEEL PLSTI WITHOUT SPEIFITION ROUND EDGES SQURE EDGES LEFT RIGHT ELETROPLTED ELETROPLTED YELLOW WHITE GLVNIZED STNDRD PKING IN OXES OF 10 PIEES STNDRD PKING IN OXES OF 20 PIEES STNDRD PKING IN OXES OF 25 PIEES 12721 1-0 - - - - 21 - - - - - 1 21155 1-0 - - - - 21 - - - - - 1 2118 1 - - - - 7 8-25 - - 1 - - 201 1-0 - - - 21 - - - 1 - - 20 1 - - - - - 21 - - - 1 - - 205 1 - - 5 - - - 21 - - - 1 - - 208 1 - - - - - 21 - - - 1 - - 209 1 - - - - - 21 - - - 1 - - 240-9 0 - - - - - - 5 - - 1-2501 1-0 - - - - - - - 87 1 - - 251 1-0 - - - - 21 - - - - 1 - THREDED PLTE FOR REVERSILE PROJETING GERS IP NO. 21155 RKETS FOR SSHES IP NO. 251 OVER STRIP IP NO. 2501 12/01

G-05 SEMENT STYS ND - HOOKS SEMENT STYS MTERIL SURFE 2111-1 IP NO. STEEL WITHOUT SPEIFITION ELETROPL./WHITE ELETROPLTED ELETROPLTED YELLOW STNDRD PKING IN OXES OF 10 PIEES MTERIL SREW PPROX. WEIGHT KG/EH 2111 1 0 0 21 25 1 220 15X4 4,0 0,17 211 1 0 0 21 25 1 10 15X4 4,0 0,21 SEMENT HOOKS MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPL./WHITE ELETROPLTED YELLOW STNDRD PKING IN OXES OF 25 PIEES 214 1 0 0 25 87 1-105 5,0 2145 1 0 0 25 87 1-155,4 2147 1 0 0 25 87 1-210 7,5 2149 1 0 0 25 87 1-20 8,8 2151 1 0 0 25 87 1-10 10,0 215 1 0 0 25 87 1-90 11,8 2155 1 0 0-87 1-470 1,5 2157 1 0 - - 87-25 8, GLVNIZED SINGLE PS. MTERIL PPROX. WEIGHT KG/100 PS. 214-55 2157 15/02

G-0 HOOK HOLDERS, FITTING HOOK THES INSTRUTIONS ND NILS HOOK HOLDERS 2159 210 IP NO. MTERIL PLSTI WITHOUT SPEIFITION SURFE GREY WHITE STNDRD PKING IN OXES OF 25 PIEES STNDRD PKING IN OXES OF 100 PIEES SREW WEIGHT PPROX KG / 100 PIEES 2159 9 0-5 - 1 18,5 9,5-0,10 210 9 0 54 5 1-19 12,5 0,19 HOOK THES ND NILS 211-219 IP NO. MTERIL STEEL WITHOUT SPEIFITION ELETROPL. / WHITE SURFE ELETROPLTED ELETROPL. / YELLOW STNDRD PKING IN OXES OF 25 PIEES STNDRD PKING IN OXES OF 100 PIEES STNDRD PKING IN OXES OF 1 KG EYE HOLE THIKNESS WEIGHT PPROX. KG / 100 PIEES 211 1 0-21 25 - - 1-25 8 4,0 0, 21 1 0 0 21 25 87 1 - - 25 8 4,7 0,8 219 1 0 0 21 25 - - - 1 25-2,5 0,1 GLVNIZED HOOK THES MTERIL SURFE 2181 2182 IP NO. 2181 2182 STEEL RSS WITHOUT SPEIFITION ELETROPL. / WHITE ELETROPLTED ELETROPL. / YELLOW STNDRD PKING IN OXES OF 50 PIEES STNDRD PKING IN OXES OF 100 PIEES INDUSTRY PKING IN OXES OF 100 PIEES INDUSTRY PKING IN OXES OF 250 PIEES 1-0 0 21 25 - - 1-2 - 0 - - - 85 1-2 - 1-0 0 - - - 1 - - - 1-0 - 21 25-1 - - 2 POLISHED PIN HOLE SREW WEIGHT PPROX. KG / 100 PIEES 28 47 5,5,5-0,75 1, 4 5, -,5 1,4 15/02

G-07 SEMENT HOOKS 2170+72-7 2171 2178 2179 SEMENT HOOK ND HOOK TH MTERIL SURFE IP NO. ZINK LLOY STEEL RSS WITHOUT SPEIFITION ELETROPL. / WHITE ELETROPLTED ELETROPL. / YELLOW POLISHED STNDRD PKING IN OXES OF 50 PIEES STNDRD PKING IN OXES OF 100 PIEES INDUSTRY PKING IN OXES OF 100 PIEES INDUSTRY PKING IN OXES OF 250 PIEES HOLE FOR PIN WEIGHT PPROX. KG / 100 PIEES 2170 0 - - 0 0 21 25 - - - - 2 10 95 5,0 2171 0 - - 0 0 21 25 - - - - 2 10 95,0-1 - 0 0 - - - 1 - - - 2172-1 - 0-21 25-1 - - 2 10 95 5,0 - - 0 - - - 85 1-2 - 217 217-1 - 0 0 21 25-1 - - 2 170 140,0 0 - - 0 0 21 25 - - 1 - - 217 54 27 1, - 1-0 - 21 - - - - - 2 2178 0 - - 0 - - 25-1 - - - 0 - - 0 0 21 25 - - - - 2 120 9 4,8 2179 0 - - 0-21 25-1 - - - 0 - - 0 0 21 25 - - - - 2 120 9 5, 1/09

G-08 FITTING INSTRUTIONS OREHOLE FOR SEMENT HOOK 5 MIN. 25 MIN. 25 FRME DEPTH FIG. 1 IP NO. 2181 MX. 20 FIG. 2 IP NO. 2172 WITH 2181 5 MIN. 25 MIN. 25 22 28 X FIG. IP NO. 2178 WITH 2181 THE MENTIONED MX. ND MIN. DIMENSIONS PPLY FOR FRME DEPTH (X ON THE DRWING) OF S MUH S 50. IF X IS IGGER THN 50, WE REOEND USING IP NO. 2172 OREHOLE FOR SEMENT HOOK FRME DEPTH X FIG. 4 IP NO. 2182 MX. 20 FIG. IP NO. 2179 WITH 2182 FIG. 5 IP NO. 2171 WITH 2182 THE MENTIONED MX. ND MIN. DIMENSIONS PPLY FOR FRME DEPTH (X ON THE DRWING) OF S MUH S 50. IF X IS IGGER THN 50, WE REOEND USING IP NO. 2171 15/04

G-09 SEMENT FSTENERS SEMENT HOOK WITH EYE SREW MTERIL SURFE IP NO. STEEL RSS WITHOUT SPEIFITION ELETROPL. / WHITE ROWN ELETROPLTED ELETROPL. / YELLOW POLISHED STNDRD PKING IN OXES OF 25 PIEES STNDRD PKING IN OXES OF 50 PIEES INDUSTRY PKING IN OXES OF 200 PIEES INDUSTRY PKING IN OXES OF 500 PIEES SREW WEIGHT PPROX. KG / 100 PIEES 2185 1-0 0-21 - - - 1 - - 1-0 - - - 25 - - 1-2 28 50 14,5 4,0 2188 1-0 0-21 25 - - 1 - - 1-0 - - - 25 - - 1-2 21 50 14,5 4,0 2189 1-0 0 - - 25 - - 1 - - 1-0 - - 21 - - - - - 2 24 50 15,5 4, 2190 1-0 - - 21 25 - - - - 2 24 50 14,5,8 1-0 - 12 - - - - 1 - - 2191 1-0 0-21 25 - - 1-2 28 50 14,5 4,0-0 - - - - 85 - - 2-2192 1-0 - - 21 - - 1 - - - 28 50 14,5 4,4 2188 2189 2185 2190-91 2192 15/02

G-10 FITTING INSTRUTIONS SEMENT HOOK WITH EYE SREW SIDE SSH SIDE FRME SIDE FRME 12 22 1.5 SIDE SSH FIG. 1 IP NO. 2185 + 2188-92 IP NO. 2185 2191-92 2188 2189 2190 24 19 11 20 14 14 15 14 MOUNTING: 1. MOUNT THE REEIVER, ON SIDE FRME IN THE WNTED HEIGHT. 2. MESURE PREISELY ON THE SIDE SSH FOR THE SEMENT HOOK WITH EYE SREW. PRE-DRILL HOLE FOR THE EYE SREW. FSTEN THE SEMENT HOOK WITH EYE SREW. 15/02

G-11 SEMENT FSTENERS SEMENT HOOK MTERIL SURFE IP NO. STEEL WITHOUT SPEIFITION ELETROPL. / WHITE ROWN ELETROPLTED ELETROPL. / YELLOW STNDRD PKING IN OXES OF 25 PIEES STNDRD PKING IN OXES OF 50 PIEES INDUSTRY PKING IN OXES OF 500 PIEES SREW EYE SREW WEIGHT PPROX. KG / 100 PIEES 218 1 0 - - 21 25 - - 2 24 50 14,5 M5 X 20 4,0 218 1 0 0-21 25-1 2 28 50 14,5 M5 X 15 5,0 219 1 0-12 - - - 1-1 0 0-21 25-1 2 28 50 14,5 M5 X 20 4,4 2194 1 0 - - 21 25 1 - - 28 50 14,5 M5 X 20 5,0 219 1 0 0-21 25 - - 2 24 50 14,5 M5 x 20 5,0 2159 1 0 0-21 25 - - 2 28 50 19,5 M5 x 20 4,4 21594 1 0 - - 21 25 1 - - 24 50 19,5 M5 X 20 5,0 218+8 219+9+2159 2194+21594 15/02