Automatic horizontal sliding landing door Residential DOC-FECMCBPCOR00EN ONGOING VERSION: 08-06-2015 ENG www.fermator.com
Door configuration LIFT APPLICATION Door cycles per year: Up to 350.000. Traffic peak of the door: Up to 240 cycles per hour. Traffic lift speed: Up to 2,5 m/s. APPLICATION RANGE Opening Clear opening - PL Clear height - L C2 - T2 700-1.100 2.000-2.300 Opening Metal sheet Double skin Steel panels Vision Gridded vision PANELS Wien type vision Bevel big vision Flush big vision Glass panels Full glass Full glass built in moorings Full glass hidden trims Aluminium glass W C2 - T2 F.R. E120 (2) F.R. E30 Rusia (2) F.R. E60 Rusia (2) F.R. EI60 (2) F.R. EI120 (2) F.R. EW60 (2) NO F.R NO F.R NO F.R. F.R. E60 NO F.R. F.R. E60 NO F.R. (2) Execution with smoke seal protection available. F.R.: Fire Rated according to EN 81-58. Frame depth 60 Jamb J1 eader Anti-trapping safety device option C2 Jamb J2 FRAMES DEFINITION Frame type Remarks STD MSS MV MSS M idden Lateral covers Options Without extra-stroke MRL Without lateral punching 120 120 145 145 Telescopic 155 595+Δ10 445 595+Δ50 120 120 145 145 Central 475 525+Δ10 475 525+Δ10 MSS MV: Frame without sill supplement with visible sill support. MSS M: Frame without sill supplement with hidden sill support. Without extra-stroke: Closing jamb without labyrinth. MRL: Jamb ready for lift control cabinet in machine roomless installations. FRAMES DETAIL Frame type STD MSS MV MSS M idden Frame detail - - - MSS MV: Frame without sill supplement with visible sill support. MSS M: Frame without sill supplement with hidden sill support. Available 1. Not available. Ask the commercial department. 1 Some option combinations may not be possible. www.fermator.com 2
Door configuration Type of sill Aluminium Reinforced aluminium SILLS Steel Steel hidden Massive Profile detail - Availability eated sill option Dust holes SILL SUPPLEMENTS Type of supplement Aluminium Reinforced aluminium Steel Massive Profile detail Availability STANDARDS EN 81-21 EN 81-41 EN 81-71 EN 81-1/2 EN 81-72 EN 81-20/50 Opening Existing Impaired Vandal resistance lifts Safety rules Firefighters lifts Safety rules buildings mobility Cat. I Cat. II C2 - T2 Opening IP21 IPX3 Protection against a solid Protected against sprays foreign body of 12,5 mm of water up to 60 degrees or more in diameter and from the vertical. protected against vertically falling drops of water. PROTECTION IP54 Protection against dust and protected against water splashed from all directions. IP65 Sealed against dust and protected against jets of water from all directions. EEx Explosion proof, Group II (surface industries) and Category 2 (explosive atmosphere between 10 and 1.000 hrs/yr). Magnetic contact Mechanical contact C2 - T2 PANEL REGULATION SUPPORT AND PANEL GUIDE Type of panel regulation support Direct fastening Type of panel guide Basic Available 1. Not available. Ask the commercial department. 1 Some option combinations may not be possible. 3 www.fermator.com
Door configuration COMPATIBILITY L + 373 116 110 8 110 90 60 AFO: L + 203 MOTOR 90 60 L + 150 AFO: L + 220 53,5 L 2.100 25 366 ±0 90 30 90 MOTOR L 2.100 24 256 ±0 90 30 90 Case Compact VF car door Coupling Symmetrical clutch Unlocking zone +250 / -135 Toe guard type Standard 304 Thickness 1,5 Range All T2 opening shown. If not otherwise indicated all dimensions in mm. Case Compact+ PM 150 car door Coupling Symmetrical clutch Unlocking zone +125 / -131 Toe guard type Standard 304 Thickness 1,5 Range All T2 opening shown. If not otherwise indicated all dimensions in mm. www.fermator.com 4
Technical features T2 mechanism Noise level Total weight Safety closing system GENERAL FEATURES < 53 db. Reference: T2 PL 800 mm L 2.000 mm 120 x 60 mm frame, with sheet metal panels - 63 kg. With spring. INSTALLATION Pre-adjusted and tested to simplify the installation. DOOR OISTWAY PROJECTION (DP) - FIXING BRACKETS C2 T2 DP Without infill panel With infill panel Without infill panel With infill panel type DP* Bracket DP* Bracket DP* Bracket DP* Bracket 1 0-54 X A 0-54 X A 0-37,5 X A 0-37,5 X A 2a 55-62 A W 55-62 A W 37,6-90 W 37,6-90 W 2b 63-90 W 63-90 W 91-140 D 91-140 D 3 91-124 V8 91-124 V8 141-150 V2 141-150 V2 Bracket type A D V2 V8 W X Thickness 5 5 4 4 5 5 *See DP dimension in sill detail (technical drawings pages). 5 www.fermator.com
Technical drawing 2 panel centre parting door 54 mm sill 2PL + 100 PL U 20 54 60 MECANICAL DETAILS S L + L + 100 L + 20 L thickness 2 Concentric Ø 48 thickness 2 L 30 SILL DETAIL PL - 200 2PL + 40 DP (1) 114 54 60 49 5 42 30 5 2PL + 100 PL + 50 L J1 PL J2 60 54 DP (1) DP Upper bracket Lower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring www.fermator.com 6
Technical drawing 2 panel side opening door 90 mm sill J2-49,5 J2 PL 1,5PL + 93,5 20 90 60 U MECANICAL DETAILS S thickness 2 L + 30 L + 100 L + 20 L L J2 + 100 PL - 200 0,5PL + 120 DP (1) 90 150 5 5 Concentric Ø 48 thickness 2 SILL DETAIL 60 40 40 5 J2-20 1,5PL + 40 25 145 42 30 90 L J2 17 PL J1 60 DP (1) DP Upper bracket Lower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring 7 www.fermator.com
Sales contacts General: info@fermator.com Spain: info.es@fermator.com Brazil: info.br@fermator.com Italy: info.it@fermator.com France: info.hp@fermator.com, info.ff@fermator.com China: info.cn@fermator.com India: info.in@fermator.com Poland: info.pl@fermator.com Germany: info.de@fermator.com Fermator reserves the right to make changes to the specification of the products within this catalogue without prior notice.