Productfeatures and advantages Specifically designed for the quick and opportunity charging of large battery capacities Suitable for lead gel accumulators and lithium-ion batteries Corresponds to the DIN VDE 0632-589 and EN 1175-1 Spring supported contact system for optimal contact pressure high electrical conductivity High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life Durable because of acid resistant design Suitable for cable sizes from 16 mm² to 35 mm² Direct crimping without reducing bushing for all cable size Wide range of accessories different handle shapes 1 pair of additional auxiliary and 1 pair of pilot contacts cooling system with air supply through Typical applications forklift trucks battery charging systems sweeper and cleaning devices 1 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
1. BASIC STRUCTURE / ORDER NUMBERS PLUG SOCKET BLACK VERSION POS. DESCRIPTION PART-NO. PLUG PART-NO. SOCKET 1 Housing >PA-GF<< 100043 100053 2 Main contact 35 mm² 108689 108695 2 Main contact 25 mm² 108687 108693 2 Main contact 16 mm² 108681 108691 3 Adapter for pilot contacts 100036 100035 3a Airadapter 100469 100468 4 Auxiliary contact 102641 102663 4a Pilot contact 102664 111318 5 Locking part black 100069 100066 6 (1) Coding pin grey (wet + wet) 100072 100072 6 (1) Coding pin green (dry) 100075 100075 6 (1) Coding pin yellow (wet + dry) 100074 --- 7 Cable clamp black (2x) 100061 100061 8 Screw (2x) 102665 102665 9 Handle black 100052 100052 (1) see page 8 2 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
PLUG SOCKET BATTERY ACID RESISTANT POS. DESCRIPTION PART-NO. PLUG PART-NO. SOCKET 1 Housing >PP-GF< 100438 100442 2 Main contact 35 mm² 108689 108695 2 Main contact 25 mm² 108687 108693 2 Main contact 16 mm² 108681 108691 3 Adapter for pilot contacts 100036 100035 3a Airadapter 100469 100468 4 Auxiliary contact 102641 102663 4a Pilot contact 102664 111318 5 Locking part grey 100450 100449 6 (1) Coding pin grey (wet + wet) 100072 100072 6 (1) Coding pin green (dry) 100075 100075 6 (1) Coding pin yellow (wet + dry) 100074 --- 7 Cable clamp grey (2x) 100447 100447 8 Screw (2x) 102665 102665 9 Handle grey 100441 100441 (1) see page 8 3 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
2. TECHNICAL SPECIFICATIONS GENERAL Nominal voltage U N Current rating I N (1) Test voltage Temperature range (incl. self-heating) Whole plugging line Plugging line main contact Plugging line auxiliary contact 150 V DC 80 A acc. DIN VDE 0623-589 2 kv AC acc. EN 1175-1 -20 C +105 C -4 F +221 F app. 23 mm app. 11,5 mm app. 11,5 mm (1) depending on the cable crosssection, see page 5 STANDARDS DIN VDE 0623-589 DIN EN 1175-1 (VDE 0117-1) File E226710 MATERIAL HOUSING Standard >PP-GF30< >PA-GF30< Color grey sim. RAL7016 black sim. RAL9005 Halogen-free DIN VDE 0472-815 yes yes UV resistant yes yes Ozon resistant limited no Battery acid resistant EN 1175-1 yes no Flammability UL-94 IEC60695 HB HB Comparative Tracking Index IEC 60112 600 V 550 V MATERIAL CONTACTS Electrolytic high conductive copper Cu-ETP acc. EN 13601 and silver plated surface 4 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
3. HEATING OF MAIN CONTACTS The REMA DIN 80 connector system is designed for optimum performance when used 16 mm 2 cross section cable according DIN VDE 0623-589. At other cable cross section the nominal operation current I N will be different. The following curves are for reference. The actual thermal performance may vary depending upon environmental conditions. DIN 80 ϑmax = 65 K Temperature rise ϑ / K I N = 80 A Current I / A Extra fine-wired highly flexible qualitity - EN 60228/class 6 Please contact REMA for additional information concerning REMA DIN 80 Battery Connector system. 5 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
4. DRAWINGS All dimesions app. mm Plugging distance charts REMA Battery Connector DIN 80 Contact open Contact close Main contact and auxiliary contact 0 mm 11,5 mm 23 mm 6 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
Preparation wire acc. DIN VDE 0623-589 CROSS SECTION [mm²] Ø d2 [MM] 0,15 Ø d1 [mm] ±0,05 l1 [mm] ±0,30 35 12,5 9,0 20,0 25 11,0 8,1 20,0 16 8,4 6,1 20,0 7 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
5. CODING The different types of batteries which are used on the vehicle market today (wet, dry or gel batteries), may only be charged with the right charger for this type of battery. In extreme cases, unapproved combinations of charge system and batteries can lead to the battery destruction. In addition, only chargers and batteries with the same voltage may be combined. For this reason REMA has developed a specially designed coding system with colored and labelled coding pins. This system allows correct connections and prevent incorrect ones. The REMA Coding System meets the requirements of DIN VDE 0623-589. All displayed product versions can only be used for the REMA DIN 80. Coding pin for wet batteries Current rating I: acc. DIN VDE 0623-589 Color: Grey RAL7035 Voltage range: 24 V 96 V Coding pin for dry batteries Current rating I: acc. DIN VDE 0623-589 Color: Green RAL6005 Voltage range: 24 V 96 V Part-No. 100072 Part-No. 100075 Universal coding pin (only for plugs) for wet/dry batteries Current rating I: acc. DIN VDE 0623-589 Color: Yellow RAL1018 Voltage range: 24 V 96 V Part-No. 100074 8 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
6. DIE SETS General processing information Please only use original REMA die sets. Only those guarantee a secure electrical connection. Please actuate the REMA made - die sets always until the end. Only process contacts with clean sleeves. The contaminated crimpsleeves increase the contact resistance and may lead to overheating. REMA made - die sets are manufactured from hardened tooling steel and have a long life cycle. Nevertheless they must be monitored regularly if under heavy use. REMA is glad to advise you about the service life assessment of your die sets. REMA offers an electrical and a microscopic analysis of your crimp samples upon request. Please always set the die sets centred on the crimp sleeves (see the drawing of that). CROSSSECTION DIM. X [mm] 35 mm² app. 21 25 mm² app. 17 REMA die sets 16 mm² app. 17 Selection of deliverable range of die sets CROSSSECTION TYPE OF DIE SET DIE SET PART-NO. 35 mm² double deep 107191 25 mm² double deep 107187 16 mm² double deep 107182 9 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
7. POWER CABLE The cables of the REMA DIN 80 High-Power DC Connector System are extra fine-wired flexible copper cables according to EN 60228 / class 6. All cables listed here have been tested and validated with the die sets in section 6. CROSSSECTION DIE SET PART-NO. CABLE PART-NO. CABLE PART-NO. 35 mm² 107191 H01N2-D 103124 REMA Flex 103125 25 mm² 107187 H01N2-D 103121 REMA Flex 103122 16 mm² 107182 H01N2-D 103117 REMA Flex 103117 On request we can evaluate your specific cables and make you an offer for a crimping validation. 10 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
8. TOOLS AND ACCESSORIES The double deep die sets set out in section 7 can be easily processed with the following tools and accessories: Hydraulic Table compression head TPK 130 Workshop capable version for frequent use With hydraulic-cylinder for connection to hydraulic pumps Incl. coupling male For double deep die sets from 16 mm² to 120 mm² For total cable diameter up to Ø 38 mm Working pressure: max. 700 bar Force of pressure: 130 kn Part-No. 107141 Hydraulic compression head CG 130 Mobile version for work on site With hydraulic-cylinder for connection to hydraulic pumps Incl. coupling male For double deep die sets from 16 mm² to 120 mm² For total cable diameter up to Ø 38 mm Working pressure: max. 700 bar Force of pressure: 130 kn Part-No. 102468 11 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
Hydraulic compression head H 250 incl. adapter H250/130 Mobile version for work on site With hydraulic-cylinder for connection to hydraulic pumps Incl. coupling male For double deep die sets from 16 mm² to 240 mm² For total cable diameter up to Ø 38 mm Working pressure: max. 700 bar Force of pressure: 250 kn Part-No.111347 Part-No.111348 Electro hydraulic pump EP 2 W Operating voltage 230 V AC 50 Hz Total compact self-contained model Suitable for hydraulic compression heads CG 130 and H 250 and more REMA compressionheads Working pressure: max. 700 bar Mechanical and electrical pressure relief valve With 1,5 m hose incl. female quick coupler Part-No 102390 12 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
Electro hydraulic pump EP 4 WF Operating voltage 230 V AC und 400 V AC (50Hz) Total compact self-contained model Suitable for hydraulic compression heads CG 130 and H 250 and more REMA compression heads Working pressure: max. 700 bar Mechanical and electrical pressure relief valve Independent electrical control sequence Off switch with emergency off switch as a footswitch Especially for workshop operation and mass production VOLTAGE PART-NO. 230 V AC 50 Hz 111349 400 V AC 50 Hz 111350 Hydraulic foot-operated pump FP 3 Double piston pump with automatic change-over With pressure relief valve By interchanging preselected pressure hoses MODEL PART-NO. With female quick coupler 111351 13 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes
High pressure hose with coupler LENGTH COATING CONNECTION PART-NO. 2 m steel (not isolated) extension 107101 3 m steel (not isolated) extension 107102 4 m steel (not isolated) extension 102353 5 m steel (not isolated) extension 102354 Please contact REMA questions to die sets, tools and other accessories for your REMA Battery Connector DIN 80. Allow us to advice you. 14 PE-TD-005 Vers.00 05.2016 REMA Group www.remagroup.com info@remagroup.com We reserve the right to carry out optical and technical changes