HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type) FEATURES Ultra-miniature size (12.8.5 mm) (.504.25 inch) Sealed construction for use in adverse environment-sealed construction by epoxy resin and rubber cap keeps off the cause of miscontact such as dust. Conforming to IP7* of IEC protective construction classification Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities UL/CSA approved Long stroke type is available Since the repeatability is excellent and the play distance (overtrabel) from the operating is ample, the task of performing the adjustments during installation is an easy one. accuracy ±0.4 mm ±.01 inch Overtravel= Min. 2.0 mm inch As wide range of high pressure is achieved, a stable reliability is ensured Immersion protected (wire leads side type) Long stroke type TYPICAL APPLICATIONS Industrial use video jack Automotives (ex. Device for opening and shutting of automobile doors) *Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. ORDERING INFORMATION Ex. ABJ 1 4 1 0 4 0 Type of switch ABJ: Turquoise switch J type Size of mounting hole 1: 1.2 mm (.047 inch) 2: 2.3 mm (.091 inch) 3: 3 mm (.118 inch) 4: Fixed pin (right side pin) type 5: Fixed pin (left side pin) type Terminal 4: Solder terminal 5: PC board terminal : Wire leads (bottom type) 7: Wire leads (right side type) 8: Wire leads (left side type) Contact arrangement 1: SPDT 0: 2: 2: 3: SPST-NO 4: : 8: L: Long stroke type Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case. 2. and SPST-NO are only available for wire leads type. 3. is only available for wire leads type 4. Not every combination is available. Please refer to the following table, PRODUCT TYPES. by pin plunger (max.) 4: 1.23 N {125 gf} : 1.9 N {200 gf} 7: 2.45 N {250 gf} (Long stroke type only) Contact 0: Silver-alloy 1: 17
PRODUCT TYPES 1. Dust protected type (Terminal type) Mounting hole 1.2mm.047inch type / Mounting hole 2.3mm.091inch type 2-(1). Immersion protected type (Bottom wire leads type) Mounting hole 1.2mm.047inch type Mounting hole 2.3mm.091inch type Remarks: When ordering UL/CSA approved types, please attach suffix 9 to the part number. Mounting hole Mounting hole 1.2 mm.047 inch type 2.3 mm.091 inch type Solder terminal PC board terminal Solder terminal 1.23 N {125 gf} ABJ141040 ABJ151040 ABJ241040 1.9 N {200 gf} ABJ14100 ABJ15100 ABJ24100 0.39 N {40 gf} ABJ141240 ABJ151240 ABJ241240 0.4 N {5 gf} ABJ14120 ABJ15120 ABJ24120 0.39 N {40 gf} ABJ141440 ABJ151440 ABJ241440 0.4 N {5 gf} ABJ14140 ABJ15140 ABJ24140 0.39 N {40 gf} ABJ14140 ABJ15140 ABJ24140 0.4 N {5 gf} ABJ1410 ABJ1510 ABJ2410 Mounting hole Mounting hole 1.2 mm.047 inch type 2.3 mm.091 inch type Solder terminal PC board terminal Solder terminal 1.23 N {125 gf} ABJ141041 ABJ151041 ABJ241041 1.9 N {200 gf} ABJ14101 ABJ15101 ABJ24101 0.39 N {40 gf} ABJ141241 ABJ151241 ABJ241241 0.4 N {5 gf} ABJ14121 ABJ15121 ABJ24121 0.39 N {40 gf} ABJ141441 ABJ151441 ABJ241441 0.4 N {5 gf} ABJ14141 ABJ15141 ABJ24141 0.39 N {40 gf} ABJ14141 ABJ15141 ABJ24141 0.4 N {5 gf} ABJ1411 ABJ1511 ABJ2411 Mounting hole 1.2 mm.047 inch type 1.23 N {125 gf} ABJ11040 ABJ12040 ABJ13040 1.9 N {200 gf} ABJ1100 ABJ1200 ABJ1300 0.39 N {40 gf} ABJ11240 ABJ12240 ABJ13240 0.4 N {5 gf} ABJ1120 ABJ1220 ABJ1320 0.39 N {40 gf} ABJ11440 ABJ12440 ABJ13440 0.4 N {5 gf} ABJ1140 ABJ1240 ABJ1340 0.39 N {40 gf} ABJ1140 ABJ1240 ABJ1340 0.4 N {5 gf} ABJ110 ABJ120 ABJ130 Mounting hole 1.2 mm.047 inch type 1.23 N {125 gf} ABJ11041 ABJ12041 ABJ13041 1.9 N {200 gf} ABJ1101 ABJ1201 ABJ1301 0.39 N {40 gf} ABJ11241 ABJ12241 ABJ13241 0.4 N {5 gf} ABJ1121 ABJ1221 ABJ1321 0.39 N {40 gf} ABJ11441 ABJ12441 ABJ13441 0.4 N {5 gf} ABJ1141 ABJ1241 ABJ1341 0.39 N {40 gf} ABJ1141 ABJ1241 ABJ1341 0.4 N {5 gf} ABJ111 ABJ121 ABJ131 18
Mounting hole 2.3mm.091inch type Mounting hole 3mm.118inch type ( type) 2-(2). Immersion protected type (Side wire leads type) Fixed pin (right side pin) type Fixed pin (left side pin) type Remarks: When ordering UL/CSA approved types, please attach suffix 9 to the part number. ABJ1,2,3,4,5 Mounting hole 2.3 mm.091 inch type 1.23 N {125 gf} ABJ21040 ABJ22040 ABJ23040 1.9 N {200 gf} ABJ2100 ABJ2200 ABJ2300 0.39 N {40 gf} ABJ21240 ABJ22240 ABJ23240 0.4 N {5 gf} ABJ2120 ABJ2220 ABJ2320 0.39 N {40 gf} ABJ21440 ABJ22440 ABJ23440 0.4 N {5 gf} ABJ2140 ABJ2240 ABJ2340 0.39 N {40 gf} ABJ2140 ABJ2240 ABJ2340 0.4 N {5 gf} ABJ210 ABJ220 ABJ230 Mounting hole 2.3 mm.091 inch type 1.23 N {125 gf} ABJ21041 ABJ22041 ABJ23041 1.9 N {200 gf} ABJ2101 ABJ2201 ABJ2301 0.39 N {40 gf} ABJ21241 ABJ22241 ABJ23241 0.4 N {5 gf} ABJ2121 ABJ2221 ABJ2321 0.39 N {40 gf} ABJ21441 ABJ22241 ABJ23441 0.4 N {5 gf} ABJ2141 ABJ2241 ABJ2341 0.39 N {40 gf} ABJ2141 ABJ2241 ABJ2341 0.4 N {5 gf} ABJ211 ABJ221 ABJ231 Mounting hole 3 mm type 0.98 N {100 gf} ABJ31840 ABJ32840 ABJ33840 1.27 N {130 gf} ABJ3180 ABJ3280 ABJ3380 Mounting hole 3 mm type 0.98 N {100 gf} ABJ31841 ABJ32841 ABJ33841 1.27 N {130 gf} ABJ3181 ABJ3281 ABJ3381 SPST-NO 1.27 N {130 gf} Right ABJ472840 ABJ473840 1.27 N {130 gf} Left ABJ482840 1.7 N {180 gf} Right ABJ47280 ABJ47380 1.7 N {180 gf} Left ABJ48280 SPST-NO 1.27 N {130 gf} Right ABJ472841 ABJ473841 1.27 N {130 gf} Left ABJ482841 1.7 N {180 gf} Right ABJ47281 ABJ47381 1.7 N {180 gf} Left ABJ48281 SPST-NO 1.27 N {130 gf} Right ABJ572840 ABJ573840 1.27 N {130 gf} Left ABJ582840 1.7 N {180 gf} Right ABJ57280 ABJ57380 1.7 N {180 gf} Left ABJ58280 19
Mounting hole 3mm.118inch type 3. Immersion protected type (Bottom wire leads type) Long stroke type Mounting hole 2.3mm.091inch type Remarks: When ordering UL/CSA approved types, please attach suffix 9 to the part number. SPST-NO 1.27 N {130 gf} Right ABJ572841 ABJ573841 1.27 N {130 gf} Left ABJ582841 1.7 N {180 gf} Right ABJ57281 ABJ57381 1.7 N {180 gf} Left ABJ58281 ABJ382840 1.27 N {130 gf} Left 1.7 N {180 gf} ABJ38280 ABJ382841 1.27 N {130 gf} Left 1.7 N {180 gf} ABJ38281 Mounting hole 2.3 mm type (Horizontal) 2.45 N {250 gf} ABJ21L70 ABJ22L70 ABJ23L70 Mounting hole 2.3 mm type (Horizontal) 2.45 N {250 gf} ABJ21L71 ABJ22L71 ABJ23L71 APPLICABLE CURRENT RANGE Contact Applicable current range operating force for operation (at pin plunger) 1.23 N {125 gf} 1.9 N {200 gf} 1mA 0.1A 1A 2A Ag Au SPECIFICATIONS 1. Contact rating Type Standard rating Low-level circuit rating 2 A 125 V AC 1.7 N {180 gf}, 1.9 N {200 gf} 2 A 30 V DC contact 1 A 125 V AC 1.23 N {125 gf}, 1.27 N {130 gf} 1 A 30 V DC Long stroke type contact contact Long stroke type contact 2.45 N {250 gf} 1.23 N {125 gf}, 1.27 N {130 gf} 1.7 N {180 gf}, 1.9 N {200 gf} 2.45 N {250 gf} 1 A 125 V AC 1 A 30 V DC 0.1 A 125 V AC 0.1 A 125 V AC 0.1 A 30 V DC 5 ma V DC 2 ma 12 V DC 1 ma 24 V DC 5 ma V DC 2 ma 12 V DC 1 ma 24 V DC 20
2. Characteristics Mechanical life (O.T.: Specified value) 3. characteristics / Release force / Pretravel Movement differential / Overtravel / ( ): Low force type, Long stroke type Wire leads (right & left side type) Other types Electrical life at rated load contact type (O.T.: max.) contact type Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance ( type) Shock resistance ( type) Contact resistance (Initial) Allowable operating speed (at no load) operating cycle rate (at no load) Ambient temperature Ambient humidity Unit weight Silver contact type Gold clad contact type Min. 5 10 5 (at 0 cpm) Min. 3 10 5 (at 0 cpm) Min. 10 (at 0 cpm) Min. 3 10 4 (at 0 cpm) Min. 10 5 (at 20 cpm) Min. 100 MΩ (at 500 V DC insulation resistance meter) ABJ1,2,3,4,5 00 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.) Min. 294 m/s 2 {30 G} (Contact opening max. 1 msec.) Dust protected type (IP50): 50 mω Immersion protected type (IP7): 100 mω (By voltage drop 1 A to 8 V DC) Dust protected type (IP50): 100 mω Immersion protected type (IP7): 150 mω (By voltage drop 0.1 A to 8 V DC) 1 to 500 mm/sec. Other type: 120 cpm Long stroke type: 0 cpm 40 C to +85 C 40 F to +185 F 95% R.H. Approx. 0.5 g.018 oz (IP50 type) Type of actuator, Release force, Min Pretravel, mm inch 1.23N {125gf} 1.9N {200gf} 0.15N {15gf} 0.25N {25gf} 0..024 0.39N {40gf} 0.4N {5gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0.118 0.39N {40gf} 0.4N {5gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0.118 0.39N {40gf} 0.4N {5gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0.118 0.98N {100gf} 1.27N {130gf} 0.20N {20gf} 0.29N {30gf}.0 Long stroke type 2.45N {250gf} 0.19N {20gf} Type of actuator Movement differential, Overtravel, Min. Mounting hole: 1.2.047, Mounting hole: 2.3.091 Mounting hole: 3.0.118 0.12.005 0.25.010 5.5±0.2.217 ±.008 7.0±0.2.27 ±.008.8±1.0.28 ±.039 8.3±1.0.327 ±.039 9.8±1.0.38 ±.039 11.3±1.0.445 ±.039 13.1 ±1.0.51 ±.039 14.±1.0.575 ±.039 1.0.039 2.5.098 1.0±2.0.30 ± Long stroke type 2.0 2.5±0.4.098 ±.01 DIMENSIONS 1. Dust protected type 1-(1) PC board terminal General tolerance: ±0.25 ±.010 5.4±0.3 0.213±.012 Pretravel 0..024Max 1.5 dia.059 dia 1.2±0.05.047±.002 5.0±0.15 ±.00 Position 1.0 5.5±0.2 0.0394.217±.008 1.1±0.12.043±.005 5.08±0.1.200±.039 5.08±0.1.200±.039 1.5±0.1.059±.004 0.9.035.12 2-0 +.005-0.5±0.1.25±.004 5.08±0.15 5.08±0.15.200±.00.200±.00 12.8±0.15.504±.00 5.50.217 -C 0.3 -C.012 1..03 4.4.173 1.5±0.12.059±.005 t=0.4.01 1.25±0.12.049±.005 Pretravel, 0..024 0.12.005 Overtravel, Min. 0.25.010 mounting hole, stand-off, 5.5±0.2.217 ±.088 7±0.3.27 ±.012 21
General tolerance: ±0.25 ±.010 8. 4.4±0.4.339.173±.01 R13.3.524 Pretravel 3.0.118Max 3.118 1.2±0.05.047±.002 4.2.15 Position.8±1.0.28±.039 8.3±1.2.327±.047 5.08±0.1.200±.039 5.08±0.1.200±.039 Pretravel, 3.0.118 Overtravel, Min. mounting hole, stand-off,.8±1.0.27 ±.039 8.3±1.2.327 ±.047 R13.2.520 R2.5.098 3.3±0.4.130±.01 Pretravel 3.0.118Max 3.118 1.2±0.05.047±.002 5.08±0.1 5.08±0.1.200±.039.200±.039 Position 9.8±1.0.38±.039 11.3±1.2.445±.047 Pretravel, 3.0.118 Overtravel, Min. mounting hole, stand-off, 9.8±1.0.38 ±.039 11.3±1.2.445 ±.047 3.4±0.4.134±.01 Pretravel 3.0.118Max 2.2.087 1.2±0.05.047±.002 R13.8 R.543 4.8.189 Position 14.±1.2.575±.047 5.08±0.1 5.08±0.1.200±.039.200±.039 Pretravel, 3.0.118 Overtravel, Min. mounting hole, stand-off, 13.1±1.0.51 ±.039 14.±1.0.575 ±.039 1-(2) Solder terminal Mounting hole: 1.2 mm.047 inch Mounting hole: 2.3 mm.091 inch 5.4±0.3 0.213±.012 Pretravel 0..024Max 1.5 dia.059 dia 4.±0.3 0.181±.012 Pretravel 0.Max.024Max 1.5 dia.059 dia 5±0.15 ±.00 1.5.059 Position 1.0 5.5±0.2 0.0394.217±.008.5±0.15.25±.00.1 2.4-.05.094 +.004 -.002 5.7.224 Position 7±0.2.27±.008 1.5±0.1.059±.004 1.2.047.12 2-1.2-0 +.005 2-0.47-0.5±0.1.25±.004 5.08±0.15 5.08±0.15.200±.00.200±.00 12.8±0.15.504±.00 2.2.087 5 -C 0.3 -C.012 0.4.01 4.4.173 1.5.059 2 0.5.020 5.08±0.15.200±.00 1.2.047 4.8±0.1.189±.004 12.8±0.15.504±.00 1.7.07 2.2.087 5.08±0.15.200±.00.1 2.4-0.05 +.004.094-.002 0.4.01 Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types. 22
2. Immersion protected type 2-(1) Bottom wire leads type Mounting hole: 1.2 mm.047 inch Mounting hole: 2.3 mm.091 inch ABJ1,2,3,4,5 General tolerance: ±0.25 ±.010 13.9.547.5±0.15.25±.00 7.50.295 8.2.323 300±10 11.811±.394 5±2 ± Thickness of the lead wire: 0.3 mm 2 UL/CSA approved type: AWG #20 Color of the lead wire: COM...Black N.C....Red N.O....White COM N.O. N.C. 13.9±0.4.547±.01 300±10 11.811±.394 5±2 ± Thickness of the lead wire: 0.3 mm 2 UL/CSA approved type: AWG #20 Color of the lead wire: COM...Black N.C....Red N.O....White Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types. As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types. 2. Dimensions of the actuator type are the same as corresponding PC board terminal types. Mounting hole: 3 mm.118 inch 13±0.1.512±.004 4.8±0.3.189±.012 8.±1 2.5.339±.039.098 Pretravel max. max. R2.5.098 9.354 5 Free Position (19.0) (.748) 5 9.25.34 3.1.1 0.05.122 +.004.002 3.3.130 Position (1±2) (.30±) Totaltravel Position (11.5 min.) (.453).5.25 3.118-0.15 -.00 4.4.173 7.5.295 R3.25.128 20.0±0.4.787±.01 300±10 11.811±.394 5±2 ± Pretravel,.0 1.0.039 Overtravel, Min 2.5.098 1.0±2.0.30 ± 23
2-(2) Side wire leads type Fixed pin type Right side pin type Right wire leads type General tolerance: ±0.25 ±.010.7.24.0 5.0 5.0 0.2.0.008 Free (F.P.) 13.05.514 max. (O.P.) 10.7 ±0.7.421 ±.028 Totaltravel (T.T.P.) (8.55)(.337) R2.0 3.45.13 C0.2.008 8.55.337 7. ±1.0.299 ±.039 9.53 ±0.1.375 ±.004 2.2 ±0.05.087 ±.002 9.53.375.9 ±0.3.272 ±.012 1.5.5 ±2 5 300 ±10 ± Pretravel, 2..102 Overtravel, Min 1.4.055 10.7±0.7.421 ±.028 Left wire leads type.7.24.0 5.0 5.0 0.2.0.008 Free (F.P.) 13.05.514 max. (O.P.) 10.7 ±0.7.421 ±.028 Totaltravel (T.T.P.) (8.55)(.337) 5 ±2 ± 3.45.13 300 ±10 R2.0 C0.2.008 8.55.337 7. ±1.0.299 ±.039 9.53 ±0.1.375 ±.004 2.2 ±0.05.087 ±.002 9.53.375.9 ±0.3.272 ±.012 1.5.5 Pretravel, 2..102 Overtravel, Min 1.4.055 10.7±0.7.421 ±.028 Left side pin type Right wire leads type C0.2.008 9.53.375 2.2 ±0.05.087 ±.002 9.53 ±0.1.375 ±.004 5.0 0.2.0.008.7.24.0 5.0 Free (F.P.) 13.05.514 max. (O.P.) 10.7 ±0.7.421 ±.028 Totaltravel (T.T.P.) (8.55)(.337) R2.0 3.45.13 8.55.337 7. ±1.0.299 ±.039.9 ±0.3.272 ±.012 1.5.5 ±2 5 300 ±10 ± Pretravel, 2..102 Overtravel, Min 1.4.055 10.7±0.7.421 ±.028 24
Left wire leads type General tolerance: ±0.25 ±.010 C0.2.008 9.53.375 2.2 ±0.05.087 ±.002 9.53 ±0.1.375 ±.004 5.0 0.2.0.008.7.24.0 5.0 Free (F.P.) 13.05.514 max. (O.P.) 10.7 ±0.7.421 ±.028 Totaltravel (T.T.P.) (8.55)(.337) 3.45.13 5 ±2 ± 300 ±10 R2.0 8.55.337 7. ±1.0.299 ±.039.9 ±0.3.272 ±.012 1.5.5 Pretravel, 2..102 Overtravel, Min 1.4.055 10.7±0.7.421 ±.028 Mounting hole 3mm.118 inch type 3.0 0.1.118.004 8.4 0.3.1.331.012 +.004.0.2 0.15.00 +.008 5.0 Free (F.P.) 18..732 max. (O.P.) 1.25 ±0.7.40 ±.028 Totaltravel (T.T.P.) (14.1)(.555) R2.0 C0.30.012 5.8 ±1.0 12.3.228 ±.039.484 1.85 ±0.3.073 ±.012 9.0.354 5 ±2 4.0 13.0 ±0.1 ±.157.512 ±.004 300 ±10 19..772 3.1 0.1.122 0 +.004 3.3.130.0 Pretravel, 2..102 Overtravel, Min 1.4.055 1.25±0.7.40 ±.028 25
3. Immersion protected type (Bottom wire leads type) Long stroke type Mounting hole: 2.3 mm.091 inch General tolerance: ±0.25 ±.010 Free (F.P.) 3.2.12 max. (O.P.) 2.5 ±0.4.098 ±.01 2.0 1.0.039 1.7 4.95.57.195 12.8.504 9.0.354.0. 3.0.118 0.15.00 8.1.319.0 ±0.15 ±.00 2.4 0.05.1.002 +.004 19.4.74 C0..024 8.2.323 2.5 ±0.1.098 ±.004 4.8 ±0.1.189 ±.004.1 2.4 0.05 +.004.002 300 ±10 5 ±2 ± COM NO NC 13.9 ±0.4.547 ±.01 Overtravel, Min 2.0 2.5 ±0.4.098±.01 2