Swivel Joints Flexmaster Joints

FITTING INX Section Pages 5-67 Fittings 68-80 dapters and Tube Fittings 8-8 escription Page Global Crimp Fittings...74 Global OTC (Over the Cover)...74 Global Skive Nipples...74 Global Socket ata...7 Global TTC (Thru the Cover) 74 Global TTC...74 Global Spiral TTC...00 Section Pages Swivel Joints 9-44 Flexmaster Joints 45-60 FLOCS 6-67 escription Page to Fitting Reference Chart...69 ow to Order...70 Internal Skive Crimp Fittings...3 LifeSaver Fittings...46, 54, 56, 63 O-Rings 78 PTF Crimp Fittings...40 Reusable Fittings...45 Section Quick isconnect Couplings ccess., quipment & ssembly Instructions Pages 68-345 346-393 Technical ata 394-433 escription Page Socket ata Crimp...7 Reusable...73 Socketless...68 Spiral Single Skive Crimp Fittings...08 Split Flanges...76 Suction Fittings...43 Super Gem...74 Swage Fittings...35 68 RTURN TO CONTNTS PG

OS TO FITTING PG RFRNC CRT OS PRT NO. CRIMP PTF CRIMP NIPPLS OTC CRIMP GLOBL TTC TTC SPIRL TTC INTRNL SKIV SPIRL SINGL SKIV SOCKTS SWG RUSBL RUSBL SOCKTS CR70 Contact aton eroquip for fitting information FC36 74 3 08 7 65 73 FC86 40 7 74 73 FC94 74 7 FC95 74 7 58 73 FC 74 74 7 53 73 FC 74 74 7 63 73 FC34 45 73 FC5 73 FC54 00 3 08 7 6 FC73 00 8 6 7 FC300 45 73 FC30 74 74 7 55 73 FC38 43 74 74 74 74 7 73 FC3 45 73 FC33 3 08 7 FC34 3 08 7 65 73 5 FC35 9 7 FC33 68 FC350 45 73 FC35 73 FC355 45 73 FC363 4 7 73 FC364 4 7 73 FC37 74 7 35 53 73 FC373 74 7 35 53 73 FC374 35 FC375 35 FC376 FC377 Contact aton eroquip for fitting information Contact aton eroquip for fitting information FC44 FC465 40 7 74 73 FC466 74 7 FC469 Contact aton eroquip for fitting information FC498 74 7 FC505 FC50 74 74 7 55 73 FC555 FC558 Contact aton eroquip for fitting information 45 73 FC563 4 7 73 FC579 7 FC606 00 34 7 FC6 74 FC66 FC69 74 74 73 OS PRT NO. FC636 74 FC639 7 FC645 40 7 FC659 FC690 35 FC693 74 FC699 CRIMP PTF CRIMP NIPPLS OTC FC70 39 FC70 39 FC735 74 7 FC736 74 3 08 7 65 FC80 45 73 30 45 73 303 45 73 503 45 73 59 74 7 58 73 53 73 73 53 73 73 540 45 73 550 7 73 554 7 73 555 7 73 556 68 565 68 570 7 73 575 68 580 45 73 583 74 7 65 45 73 66 43 74 74 74 74 7 73 68 74 7 766 74 7 58 73 78 74 7 58 73 807 40 7 74 73 808 75 73 G0 74 74 7 G34 Contact aton eroquip for fitting information G94 74 74 7 G95 74 74 7 G466 00 G493 74 08 7 65 73 G506 00 OS TO FITTING CRT CRIMP GLOBL TTC TTC INTRNL SKIV SPIRL SINGL SKIV G663 74 74 7 53 73 G68 74 74 7 G683 74 7 G78 74 74 7 RUSBL G793 74 74 7 63 73 SPIRL TTC SOCKTS SWG RUSBL SOCKTS 69

OW TO ORR WRNING ow to order ccurate processing and prompt delivery of your order depend on easy identification of your requirements. Please order eroquip parts using correct part numbers as described in this catalog. Inquiries and orders should be directed to your eroquip istributor or: aton eroquip Industrial ivision 3000 Strayer Road, P.O. Box 63 Maumee, Ohio 43537-063 49/867-600; Fax: 49/867-69 www.aeroquip.com Part numbers and dash sizes ash size designates the nominal size in 6ths of an inch. This number immediately follows the part number and is separated from it with a dash. Fittings with FC or FJ part numbers will have the size expressed in four numerals. The first two numerals indicate the size of the connecting end and the second two numerals indicate the size of the hose end. ll other fittings are followed by a dash number which is the nominal size of the fitting expressed in 6ths of an inch. Where two dash numbers are given, the first one generally indicates the pipe or port size and the second indicates the tube or hose size. The hose dash number should always be the same as the last dash number on the fitting. Material designation Most fittings in this catalog have a material designation as part of the part number. n explanation is shown below. 38 Brass nipple, steel socket B Brass 44 Bronze nipple and nut: C Stainless steel brass socket luminum alloy 63 Brass nipple, steel nut S Steel and socket 59 36 Stainless steel 449 Malleable iron imensions imensions given in this catalog for eroquip products are approximate and should be used for reference only. xact dimensional information for a given product is subject to change and varying tolerances; contact aton eroquip directly for full current information. eroquip manufactures the terminal ends of our hose fittings to the appropriate requirements established by the S. Therefore, the performance ratings of these hose fittings meet the S requirements. It is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating. When ordering hose assemblies, please keep the terminal end performance rating in mind since this may affect overall hose assembly performance. Many hose assembly components (hose and fittings) are easily assembled in the field. owever, factory assembled swaged, crimped and reusable hose assemblies are available. For complete information, contact aton eroquip. MIXING/MTCING ROQUIP FITTING TOLRNCS R NGINR TO MTC ROQUIP OS TOLRNCS. T US OF ROQUIP ON OS SUPPLI BY OTR MNUFCTURRS N/OR T US OF ROQUIP OS WIT SUPPLI BY OTR MNUFCTURRS MY RSULT IN T PROUCTION OF UNRLIBL N UNSF OS SSMBLIS N IS NITR RCOMMN NOR UTORIZ BY ROQUIP. ROQUIP SLL NOT B SUBJCT TO N ISCLIMS NY OBLIGTIONS OR LIBILITIS (INCLUING BUT NOT LIMIT TO LL CONSQUNTIL, INCINTL N CONTINGNT MGS) RISING OUT OF BRC OF CONTCT OR OF WRRNTY OR RISING FROM TORT CLIMS (INCLUING WITOUT LIMITTION NGLIGNC N STRICT LIBILITY) OR OTR TORIS OF LW WIT RSPCT TO NY OS SSMBLIS NOT PROUC FROM GNUIN ROQUIP, OS N ROQUIP PPROV QUIPMNT, N IN CONFORMNC WIT ROQUIP PROCSS N PROUCT INSTRUCTIONS FOR C SPCIFIC OS SSMBLY. FILUR TO FOLLOW ROQUIP PROCSS N PROUCT INSTRUCTIONS N LIMITTIONS COUL L TO PRMTUR OS SSMBLY FILURS RSULTING IN PROPRTY MG, SRIOUS INJURY OR T. Globally Standardized Pressure Ratings eroquip has standardized hose burst and operating pressure ratings in cataloging, worldwide. This move toward standardization will slightly alter some of the pressures ratings listed for hoses in this catalog as pressures are rounded off. This is a paper conversion only. This action has no effect on the actual testing and certification of eroquip hoses to stringent product standards. * Specifications and dimensions on this catalogue are subject to change without notice. SFTY PRCUTIONS: Read the instruction manual carefully and thoroughly before using the product, and then use it correctly. 70

OW TO ORR Global Crimp Sockets, Nipples and Fittings Global Part Numbering System Part numbers collapse to the shortest possible number of digits: It is assumed that a global fitting has a straight configuration unless a code is added to designate otherwise. e.g., S8FJ8 has a straight configuration S8FJ8 has a 45 elbow configuration ashes and unnecessary zeros are not used. e.g., /4 is designated by 4 not 4 or 04 5 /8 is designated by 0 not 0 Global Crimp Sockets Complete socket number: S 8 Global -piece part number Wire braid construction = Single wire braid B = ouble wire braid size* Global Material esignation Global crimp nipples, sockets and fittings standard material is zinc plated carbon steel. Items so designated in catalog available in stainless steel. Global Crimp Nipples/Fittings Complete nipple part number: S 8 FJ 8 Product group code S = Global -piece part number = TTC fitting part number B = TTC fitting part number G = OTC Global fitting part number = Spiral TTC fitting part number for four-spiral hose Z = Spiral TTC fitting part number for six-spiral hose Material stock code If material is round stock, then this position collapses. = inch hex stock (metric hex, this position collapses) For /4 Braided Fittings: P = wire braid hose socket with no hex R = wire braid hose socket with inch hex T = wire braid hose socket with no hex V = wire braid hose socket with inch hex nd connection size* nd connection code BF = BSP Female Swivel FR = Female ORS ( hex) FS = Female S Swivel BP = BSP Male Parallel JF = JIS Female Swivel BT = BSP Male Tapered JM = BSP Female Swivel CT = Cat Flange ( hexes) K = 4 Male (light duty) KF = Komatsu Female L = KO Female Swivel Swivel (light duty) KS = Komatsu Split Flange S = KO Female Swivel MB = Male Boss O-Ring (heavy duty) MF = Male Inverted Flare K = 4 Male (heavy duty) MJ = Male JIC F = Flange Code 6 MP = Male Pipe FJ = Female JIC Swivel MR = Male ORS FL = Flange Code 6 PS = Pipe Swivel Connecting end configuration code If nipple has a straight configuration, then this position collapses. = 45 = 67 / B = 90, standard or short drop F = 30 C = 90, long drop G = 60 = / size* Material esignation C = stainless steel, if fitting is zinc plated carbon steel (standard), this position collapses. *When ordering sizes 3, 4, 5, 6 and 8 the part number requires only single digits Crimp fittings Fittings are ordered as complete assemblies or as component parts. Complete fitting number: Basic part number Pipe or port size Mating hose size Material designation suffix Crimp socket Complete socket number: Basic part number Socket hose size Material designation suffix Crimp nipple Complete nipple number: Basic part number Socket or port size Socket hose size Material designation suffix Reusable fittings Fittings are ordered as complete assemblies. Complete number: Basic part number Pipe or port size (in 6ths of an inch) Mating hose size Material designation suffix FJ9896 0 0 S FC77 0 S FC70 0 0 S 4 8 0 S 7

SOCKT T Crimp Socket ata Socket to hose correct combinations Use of the correct eroquip socket with a given eroquip hose is essential for proper assembly and performance. Virtually all eroquip hose sockets are marked with the socket part number and dash size. Using this number, from the following table, the correct hose or hoses may be found and dash sizes matched, to assure the correct combination. Global Non-Skive Socket Identification (TTC, TTC-0, and TTC Sockets) Thru the cover fitting sockets for one wire and two wire braid hose in all sizes except 0 have one and two rings plus a scribe mark and TTC (size) stamped on the socket. In the 0 size there are two sockets, one for one wire braid hose with one ring on the socket and one for two wire braid hose with two rings on the socket plus a scribe mark. Both 0 sockets have TTC 0 stamped on the sockets. Thru the cover fitting sockets for four spiral hose have four rings plus a scribe mark and TTC (size) stamped on the socket. TTC- TTC-0 TTC- TTC-0 Global Over the Cover Identification (OTC Sockets) Over the cover Global fitting sockets have G(size) and a scribe mark stamped on the socket. G SCRIB MRK: For TTC and TTC Fittings, the Scribe Mark identifies Crimp Length Indicator for assembly; See Bulletin J55 for details. Global Skive Socket Identification S sockets are stamped S(size) for one wire braid hose and SB sockets are stamped SB(size) for two wire braid hose. S sockets have one ring and SB sockets have two rings grooved around the circumference of each socket. S SB Global Identification Marking Global hose fittings are identified with the eroquip trademark and the hose size. In addition, Global sockets are identified with the following: Identification Fitting /Socket Marking Style escription ring skive One wire braid S(size) hose and skive type socket rings skive Two wire braid SB(size) hose and skive type socket rings Thru the One wire and ring cover two wire braid scribe mark hose and TTC TTC (size) socket 4 rings Spiral thru Four spiral scribe mark the cover wire hose and TTC (size) TTC socket ring Thru the One wire braid scribe mark cover 0 size hose TTC 0 ( 0 size only) and TTC socket rings Thru the Two wire braid scribe mark cover 0 size hose TTC 0 ( 0 size only) and TTC socket scribe mark Over the Textile braid G (size) cover and suction hoses and OTC socket (S 00R3, R4 and R6 hose styles) Socket eroquip base part hose base ash Crimp sockets number part no. sizes 68 03 to 3 FC94 04 to 0 FC 04 to 6 FC30 04 to 0 FC37 03 S FC373 03 FC50 04 to 0 FC639 04 to 08 FC90 00 FC90 00 G94 04 to 0 G663 04 to 6 G68 04 to 08 59 4 to 3 766 4 to 3 78 4 to 3 FC95 04 to 3 FC 04 to 3 FC37 04 to 6 FC373 04 to 6 SB FC466 04 to FC498 04 to FC579 04 FC639 0 to 6 FC735 04 to 0 FC90 0 to 06 FC90 0 to 06 G0 04 to 0 G95 04 to 3 G683 04, 06 G78 04 to 0 G793 04 to 3 FC36, 6 FC736 FC40 FC33, 6 G493 FC34, 6 FC36 06 to 0 FC347 G493 FC736 FC363 08 to 3 FC347 FC364 08 to 3 FC563 08 to 3 FC60 FC606 6, 0 FC36 6 to 3 FC736 6 to 0 FC540 FC54 08, 6 to 3 FC73 6 FC33 6 to 3 FC34 6 FC35 6 FC54 FC73, 0 to 3 FC77 FC33 FC34 FC35 66 40 FC303 FC38 40 807 05, 06, 0 FC3443 FC645 06 FC86 05, 06, 0 FC465 05, 06, 0 807 03, 04, 08,, 6 FC3596 FC86 04, 08, FC465 03, 04, 06 FC645 06 FC740 FC650 04 to 7

SOCKT T Reusable Socket ata Socket to hose correction combinations Use of the correct eroquip socket with a given eroquip hose is essential for proper assembly and performance. Virtually all eroquip hose sockets are marked with the Socket eroquip base part hose base ash Reusable sockets number part number sizes 807, 06 FC86, all FC465 08 808 all 0 4 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 30, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558 550, 554, 555, 570 4 to 6 to 48 all socket part number and dash size. Using this number, from the table below, the correct hose or hoses may be found and dash sizes matched, to assure the correct combination. Socket eroquip base part hose base ash Reusable sockets number part number sizes 59 6 766 6 78 6 403 FC36 08, 6 FC95 6 FC34 08 G493 8, 6 FC383 FC36 0, 4 G493 FC54 FC, all G663 FC64 FC30 all FC50 04 to 6 9 53, 53 all FC65 FC, all G793 4007 FC36 6, G493 FC94 FC37, FC373 all 400 59 766 78 FC95 4 to 0 to 3 4 to 0 to 3 4 to 0 to 3 4 to 0 to 3 73

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Male Pipe (MP) SMP3 /8-7 03.59.90.0.44 S4MP3 /4-8 03.6.93.0.56 SMP4 GMP4 MP4 /8-7 04.84.9.7.56 S4MP4 G4MP4 4MP4 /4-8 04.06.4.7.56 S6MP4 G6MP4 6MP4 3 /8-8 04.90.98.7.69 S4MP6 G4MP6 4MP6 B4MP6 /4-8 06.8.8.6.69 S6MP6 G6MP6 6MP6 B6MP6 3 /8-8 06.7.8.6.69 S8MP6 G8MP6 8MP6 B8MP6 /-4 06.7.8.6.88 S4MP8 G4MP8 4MP8 B4MP8 /4-8 08.40.3.30.8 S6MP8 G6MP8 6MP8 B6MP8 3 /8-8 08.49.3.38.8 S8MP8 G8MP8 8MP8 B8MP8 /-4 08.74.56.38.88 SMP8 GMP8 MP8 BMP8 3 /4-4 08.56.39.38.06 S6MP0 6MP0 3 /8-8 0.49.33.4.94 S8MP0 G8MP0 8MP0 B8MP0 /-4 0.74.58.50.94 SMP0 GMP0 MP0 BMP0 3 /4-4 0.56.40.50.06 S8MP G8MP 8MP B8MP /-4.78.60.56.3 SMP GMP MP BMP 3 /4-4.84.65.6.3 S6MP G6MP 6MP B6MP - /.80.6.6.38 SMP6 GMP6 MP6 BMP6 3 /4-4 6 3.0.67.76.38 S6MP6 G6MP6 6MP6 B6MP6 - / 6 3..86.8.38 S0MP6 G0MP6 0MP6 B0MP6 /4- / 6 3.08.7.8.69 S6MP0 G6MP0 B6MP0 - / 0 3.66.93.95.75 R6MP0* - / 0 3.66.93.95.75 V6MP0** - / 0 3.66.93.95.75 S0MP0 G0MP0 B0MP0 /4- / 0 3.5.79.05.8 R0MP0* /4- / 0 3.5.79.05.8 V0MP0** /4- / 0 3.5.79.05.8 S4MP4 G4MP4 4MP4 B4MP4 /- / 4 4.8.36.6.00 S3MP3 G3MP3 3MP3 - / 3 4.59.6.75.50 B3MP3 - / 3 5.06.58.75.50 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. lso available in stainless steel, add suffix C to part number, i.e., 4MP4C. 74

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel (FJ) S3FJ3 3 /8-4 03.69.00.0.50.44 S4FJ3 7 /6-0 03.69.00.0.56.44 S3FJ4 G3FJ4 3FJ4 3 /8-4 04.94.0.3.50.56 S4FJ4 G4FJ4 4FJ4 7 /6-0 04.00.07.7.56.56 S5FJ4 G5FJ4 5FJ4 /-0 04.98.06.7.6.56 S6FJ4 G6FJ4 6FJ4 9 /6-8 04.03..7.69.56 S5FJ5 G5FJ5 5FJ5 /-0 05.08.4..6.56 S6FJ5 G6FJ5 6FJ5 9 /6-8 05.06...69.56 S4FJ6 G4FJ6 4FJ6 B4FJ6 7 /6-0 06.9.9.7.56.69 S5FJ6 G5FJ6 5FJ6 /-0 06.4.4.3.6.69 S6FJ6 G6FJ6 6FJ6 B6FJ6 9 /6-8 06.8.8.6.69.69 S8FJ6 G8FJ6 8FJ6 B8FJ6 3 /4-6 06.3.3.6.88.69 S0FJ6 7 /8-4 06.4.43.6.00.8 S8FJ8 G8FJ8 8FJ8 B8FJ8 3 /4-6 08.63.46.38.88.8 S0FJ8 G0FJ8 0FJ8 B0FJ8 7 /8-4 08.64.47.38.00.8 SFJ8 GFJ8 FJ8 BFJ8 /6-08.73.56.38.5.00 S6FJ8 G6FJ8 6FJ8 B6FJ8 5 /6-08 3.06.89.38.50.5 S8FJ0 8FJ0 3 /4-6 0.65.50.39.88.94 S0FJ0 G0FJ0 0FJ0 B0FJ0 7 /8-4 0.77.6.50.00.94 SFJ0 GFJ0 FJ0 BFJ0 /6-0.7.57.50.5.00 S0FJ G0FJ 0FJ B0FJ 7 /8-4.8.63.48.00. SFJ GFJ FJ BFJ /6-.84.65.6.5. S4FJ G4FJ 4FJ B4FJ 3 /6-.84.65.6.38. S6FJ G6FJ 6FJ B6FJ 5 /6-.9.7.6.50.5 SFJ6 GFJ6 FJ6 BFJ6 /6-6 3.5.80.6.5.38 S6FJ6 G6FJ6 6FJ6 B6FJ6 5 /6-6 3.9.93.8.50.38 S0FJ6 G0FJ6 0FJ6 B0FJ6 5 /8-6 3.7.8.8.00 S6FJ0 G6FJ0 B6FJ0 5 /6-0 3.46.73.85.50 R6FJ0* 5 /6-0 3.46.73.85.50 V6FJ0** 5 /6-0 3.46.73.85.50 S0FJ0 G0FJ0 B0FJ0 5 /8-0 3.6.88.05.00 R0FJ0* 5 /8-0 3.6.88.05.00 V0FJ0** 5 /8-0 3.6.88.05.00 S4FJ0 B4FJ0 7 /8-0 3.76.03.05.5 S4FJ4 G4FJ4 4FJ4 B4FJ4 7 /8-4 3.90.07.6.5 S4FJ3 G4FJ3 4FJ3 7 /8-3 4.09..3.5 S3FJ3 G3FJ3 3FJ3 /- 3 4.34.39.75.88 B3FJ3 /- 3 4.8.33.75.88 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. lso available in stainless steel, add suffix C to part number, i.e., 4FJ4C. 76

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel 90 lbow (FJB) S4FJB3 7 /6-0 03.60.9.0.68.56 S4FJB4 G4FJB4 4FJB4 7 /6-0 04.84.9.5.68.56 S5FJB4 G5FJB4 5FJB4 /-0 04.9.00.7.76.6 S6FJB4 G6FJB4 6FJB4 9 /6-8 04.00.08.7.84.69 S5FJB5 /-0 05.95.0.8.76.6 S6FJB6 G6FJB6 6FJB6 9 /6-8 06...4.84.69 B6FJB6 9 /6-8 06.4.4.4.50.69 S8FJB6 G8FJB6 8FJB6 3 /4-6 06.4.4.6.09.88 B8FJB6 3 /4-6 08.7.7.6.87.88 S6FJB8 G6JFB8 6FJB8 9 /6-8 08.43.6.4.84.69 S8FJB8 G8FJB8 8FJB8 3 /4-6 08.59.4.37.09.88 B8FJB8 3 /4-6 08.87.70.37.87.88 S0FJB8 G0FJB8 0FJB8 7 /8-4 08.78.6.38.9.00 B0FJB8 7 /8-4 08.87.70.37.93.00 S0FJB0 G0FJB0 0FJB0 B0FJB0 7 /8-4 0.70.55.45.9.00 SFJB8 /6-08 3.39..38.80.5 SFJB0 GFJB0 FJB0 /6-0 3.3.6.50.80.5 BFJB0 /6-0 3.34.8.50.35.5 SFJB GFJB FJB /6-3.36.7.58.80.5 BFJB /6-3.37.8.56.35.5 S6FJB G6FJB 6FJB 5 /6-3.37.8.6.39.50 B6FJB 5 /6-3.37.8.56.46.50 S6FJB6 G6FJB6 6FJB6 5 /6-6 3.56.0.76.39.50 B6FJB6 5 /6-6 4.06.70.76 3.04.50 S6FJB0 5 /6-0 4.00.7.76.39.50 S0FJB0 G0FJB0 5 /8-0 4.5.5.0.75.00 B0FJB0 5 /8-0 4.75 3.0.0 3.40.00 R0FJB0* 5 /8-0 4.5.5.0.75.00 V0FJB0** 5 /8-0 4.5.5.0.75.00 B4FJB4 7 /8-4 5.40 3.58.9 3.95.5 S4FJB4 4FJB4 7 /8-4 4.63.8.6 3.7.5 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. Swivel nuts are universal for both S 37 and S 45 connections. 78

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel 90 Long rop lbow (FJC) S4FJC4 G4FJC4 4FJC4 7 /6-0 04.84.9.5.80.56 S5FJC4 G5FJC4 5FJC4 /-0 04.9.00.7.80.6 S6FJC4 9 /6-8 04.79.87.7.8.69 S6FJC6 G6FJC6 6FJC6 9 /6-8 06..3.4.8.69 B6FJC6 9 /6-8 06.4.4.4.73.69 S8FJC6 8FJC6 3 /4-6 06.54.54.6.45.88 S8FJC8 G8FJC8 8FJC8 3 /4-6 08.7.54.37.45.88 B8FJC8 3 /4-6 08.87.70.37 3.33.88 S0FJC8 G0FJC8 0FJC8 7 /8-4 08.78.6.38.57.00 B0FJC8 7 /8-4 08.78.6.38.57.00 S0FJC0 0FJC0 7 /8-4 0.70.54.46.57.00 SFJC GFJC FJC /6-3.36.7.58 3.70.5 BFJC /6-3.37.8.56 4.4.5 S6FJC6 G6FJC6 6FJC6 5 /6-6 3.56.0.76 4.58.50 B6FJC6 5 /6-6 4.06.70.76 5.4.50 S0FJC0 G0FJC0 5 /8-0 4.5.5.0 5.53.00 B0FJC0 5 /8-0 4.75 3.0.0 5.94.00 R0FJC0* 5 /8-0 4.5.5.0 5.53.00 V0FJC0** 5 /8-0 4.5.5.0 5.53.00 ML JIC/S 37 (MJ) S4MJ4 G4MJ4 4MJ4 7 /6-0 04.00.07.7.56 S5MJ4 G5MJ4 5MJ4 /-0 04.84.9.7.56 S6MJ4 G6MJ4 6MJ4 9 /6-8 04.85.93.7.6 S5MJ5 /-0 05.07...56 S6MJ5 G6MJ5 6MJ5 9 /6-8 05.88.94..6 S6MJ6 G6MJ6 6MJ6 B6MJ6 9 /6-8 06.6.7.6.69 S8MJ6 G8MJ6 8MJ6 B8MJ6 3 /4-6 06.0..6.8 S8MJ8 G8MJ8 8MJ8 B8MJ8 3 /4-6 08.57.4.38.8 S0MJ8 G0MJ8 0MJ8 B0MJ8 7 /8-4 08.4.6.38.94 SMJ8 GMJ8 MJ8 BMJ8 /6-08.59.4.38. S0MJ0 G0MJ0 0MJ0 B0MJ0 7 /8-4 0.73.57.48.94 SMJ0 GMJ0 MJ0 BMJ0 /6-0.59.43.50. S0MJ G0MJ 0MJ B0MJ 7 /8-4.78.59.48. SMJ GMJ MJ BMJ /6-.94.75.6. S4MJ G4MJ 4MJ B4MJ 3 /6-.73.54.6.5 S6MJ G6MJ 6MJ B6MJ 5 /6-.75.56.6.38 S6MJ6 G6MJ6 6MJ6 B6MJ6 5 /6-6 3.5.90.8.38 S0MJ0 G0MJ0 B0MJ0 5 /8-0 3.89.6.05.75 R0MJ0* 5 /8-0 3.89.6.05.75 V0MJ0** 5 /8-0 3.89.6.05.75 S4MJ4 G4MJ4 4MJ4 B4MJ4 7 /8-4 4.3.49.6.00 S3MJ3 G3MJ3 3MJ3 /- 3 4.89.9.75.6 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. Swivel nuts are universal for both S 37 and S 45 connections. 79

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female S 45 Swivel (FS) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S4FS4 G4FS4 4FS4 7 /6 0 04.00.07.7.56.56 S5FS4 G5FS4 5FS4 / 0 04.98.06.7.6.56 S4FS6 G4FS6 4FS6 B4FS6 7 /6 0 06.9.9.9.56.69 S6FS6 G6FS6 6FS6 B6FS6 5 /8 8 06.3.3.6.75.69 S8FS6 G8FS6 8FS6 B8FS6 3 /4 6 06.3.3.6.88.69 S8FS8 G8FS8 8FS8 B8FS8 3 /4 6 08.63.46.38.88.8 S0FS8 G0FS8 0FS8 B0FS8 7 /8 4 08.64.47.38.00.8 S0FS0 G0FS0 7 /8 4 0.77.6.50.00.94 SFS0 FS0 BFS0 /6 4 0.7.57.50.5.06 SFS GFS FS BFS /6 4.84.65.6.5. Male Boss O-Ring (MB), see page 78 for O-Rings S4MB4 G4MB4 4MB4 7 /6 0 04.84.9.7.56 S5MB4 G5MB4 5MB4 / 0 04.84.9.7.6 S6MB4 G6MB4 6MB4 9 /6 8 04.78.86.7.69 S6MB6 G6MB6 6MB6 B6MB6 9 /6 8 06.00.00.6.69 S8MB6 G8MB6 8MB6 B8MB6 3 /4 6 06.97.98.6.88 S8MB8 G8MB8 8MB8 B8MB8 3 /4 6 08.36.9.38.88 S0MB8 G0MB8 0MB8 B0MB8 7 /8 4 08.6.09.38.00 SMB8 GMB8 MB8 BMB8 /6 08.39..38.5 S0MB0 G0MB0 0MB0 B0MB0 7 /8 4 0.47.3.50.00 SMB0 GMB0 MB0 BMB0 /6 0.39.3.50.5 SMB GMB MB BMB /6.44.5.6.5 S6MB G6MB 6MB B6MB 5 /6.56.37.6.50 S6MB6 G6MB6 6MB6 B6MB6 5 /6 6.74.39.8.50 S0MB0 G0MB0 BMB0 5 /8 0 3.63.90.05.88 R0MB0* 5 /8 0 3.63.90.05.88 V0MB0** 5 /8 0 3.63.90.05.88 S4MB4 G4MB4 4MB4 B4MB4 7 /8 4 3.63.8.6. *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 80

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female ORS Swivel (FR), see page 78 for O-Rings Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S4FR4 G4FR4 4FR4 9 /6 8 04.95.03.7.69.56 S6FR4 G6FR4 6FR4 /6 6 04.04..7.8.6 S4FR6 G4FR6 4FR6 B4FR6 9 /6 8 06.4.5.7.69.69 S6FR6 G6FR6 6FR6 B6FR6 /6 6 06.3.4.6.8.69 S8FR6 G8FR6 8FR6 B8FR6 3 /6 6 06.3.3.6.94.8 S6FR8 G6FR8 6FR8 B6FR8 /6 6 08.5.34.6.8.88 S8FR8 G8FR8 8FR8 B8FR8 3 /6 6 08.67.50.38.94.88 S0FR8 G0FR8 0FR8 B0FR8 4 08.64.47.38..94 SFR8 GFR8 FR8 BFR8 3 /6 08.80.63.38.38. S8FR0 G8FR0 8FR0 B8FR0 3 /6 6 0.67.5.38.94.94 S0FR0 G0FR0 0FR0 B0FR0 4 0.76.6.48..94 SFR0 GFR0 FR0 BFR0 3 /6 0.79.63.50.38. S0FR G0FR 0FR B0FR 4.8.6.48.. SFR GFR FR BFR 3 /6.9.7.6.38. S6FR G6FR 6FR B6FR 7 /6.98.79.6.6.38 SFR6 GFR6 FR6 BFR6 3 /6 6 3..86.6.38.38 S6FR6 G6FR6 6FR6 B6FR6 7 /6 6 3.9.94.8.6.38 S0FR6 G0FR6 0FR6 B0FR6 /6 6 3.5.90.8.88.6 S0FR0 G0FR0 B0FR0 /6 0 4.07.33.0.88.75 R0FR0* /6 0 4.07.33.0.88.75 V0FR0** /6 0 4.07.33.0.88.75 S4FR0 G4FR0 0 3.88.5.05.5.8 R4FR0* 0 3.88.5.05.5.8 V4FR0** 0 3.88.5.05.5.8 B4FR0 0 3.74.9.05.5.00 S4FR4 G4FR4 4FR4 4 4.0.9.6.5.00 B4FR4-4 3.93..6.5.00 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 8

Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 GLOBL CRIMP Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Ø Female ORS Swivel 90 Short rop lbow (FRB), see page 78 for O-Rings S4FRB4 G4FRB4 4FRB4 9 /6-8 04.09.7.7.8.69 S6FRB4 G6FRB4 6FRB4 /6-6 04..30.7.90.8 S8FRB4 3 /6-6 04.37.45.7.9.94 S4FRB6 G4FRB6 4FRB6 9 /6-8 06...7.8.69 S6FRB6 G6FRB6 6FRB6 B6FRB6 /6-6 06.34.34.6.90.8 S8FRB6 G8FRB6 8FRB6 B8FRB6 3 /6-6 06.6.6.6.5.94 S6FRB8 G6FRB8 6FRB8 B6FRB8 /6-6 08.56.39.6.90.8 S8FRB8 G8FRB8 8FRB8 B8FRB8 3 /6-6 08.84.67.36.5.94 S0FRB8 G0FRB8 0FRB8 B0FRB8-4 08 3.07.9.38.7. SFRB8 GFRB8 FRB8 BFRB8 3 /6-08 3.45.8.38.88.38 S0FRB0 G0FRB0 0FRB0 B0FRB0-4 0 3.07.9.45.7. SFRB0 GFRB0 FRB0 BFRB0 3 /6-0 3.44.9.50.88.38 S0FRB G0FRB 0FRB -4 3..93.45.7. SFRB GFRB FRB BFRB 3 /6-3.49.30.55.88.38 S6FRB G6FRB 6FRB B6FRB 7 /6-4.04.85.6..6 S6FRB6 G6FRB6 6FRB6 B6FRB6 7 /6-6 4..87.8..6 S0FRB6 G0FRB6 0FRB6 /6-6 4.85 3.50.8.5.88 S0FRB0 G0FRB0 B0FRB0 /6-0 5.30 3.57.0.5.88 R0FRB0* /6-0 5.30 3.57.0.5.88 V0FRB0** /6-0 5.30 3.57.0.5.88 S4FRB4 G4FRB4 4FRB4-4 4.63.8.6.70.5 Female ORS Swivel 90 Long rop lbow (FRC), see page 78 for O-Rings S4FRC4 G4FRC4 4FRC4 9 /6-8 04.09.7.7.80.69 S6FRC4 G6FRC4 6FRC4 /6-6 04..30.7.3.8 S8FRC4 G8FRC4 8FRC4 3 /6-6 04.59.67.7.55.94 S6FRC6 G6FRC6 6FRC6 B6FRC6 /6-6 06.34.34.4.3.8 S8FRC6 G8FRC6 8FRC6 B8FRC6 3 /6-6 06.7.7.6.55.94 S8FRC8 G8FRC8 8FRC8 B8FRC8 3 /6-6 08.87.70.37.55.94 S0FRC8 G0FRC8 0FRC8-4 08 3.07.9.38.76. S0FRC0 G0FRC0 0FRC0-4 0 3.07.9.46.76. SFRC GFRC FRC BFRC 3 /6-3.48.9.56 3.78.38 S6FRC 6FRC 7 /6-4.04.85.6 4.50.6 S6FRC6 G6FRC6 6FRC6 B6FRC6 7 /6-6 4..86.78 4.50.6 S0FRC0 G0FRC0 B0FRC0 /6-0 5.30 3.57.0 5.09.88 R0FRC0* /6-0 5.30 3.57.0 5.09.88 V0FRC0** /6-0 5.30 3.57.0 5.09.88 S4FRC4 G4FRC4 4FRC4-4 4.63.8.6 5.54.5 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 83

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Part Number Part Number Part Number Part Number Thread Size Male ORS (MR), see page 78 for O-Rings S4MR4 G4MR4 4MR4 9 /6-8 04.78.86.7.6 S6MR6 G6MR6 6MR6 B6MR6 /6-6 06.99.99.6.75 S8MR6 G8MR6 8MR6 B8MR6 3 /6-6 06.95.95.6.88 S8MR8 G8MR8 8MR8 B8MR8 3 /6-6 08.30.3.38.88 SMR GMR MR BMR 3 /6-.63.44.6.5 S6MR G6MR 6MR B6MR 7 /6-.53.34.6.50 S6MR6 7 /6-6 3.00.64.8.50 Male Stāplok (SL), see page 78 for O-Rings and Staples S4SL4 G4SL4 4SL4 04.8.6.7 S6SL6 G6SL6 6SL6 B6SL6 06.30.30.6 S8SL6 G8SL6 8SL6 B8SL6 06.30.30.6 S8SL8 G8SL8 8SL8 B8SL8 08.5.35.38 SSL GSL SL BSL.56.37.6 S6SL6 G6SL6 6SL6 B6SL6 6.95.60.8 S0SL0 G0SL0 B0SL0 0 3.40.67.05 P0SL0* 0 3.40.67.05 T0SL0** 0 3.40.67.05 S3SL3 G3SL3 3SL3 3 3.87.89.75 Male S Inverted Flare Swivel (MF) S4MF3 7 /6-4 03.5.46.0.44 S3MF4 3MF4 3 /8-4 04.4.50.0.38 S4MF4 G4MF4 4MF4 7 /6-4 04.39.46.7.44 S5MF4 5MF4 /-0 04.39.46.7.50 S5MF6 G5MF6 5MF6 /-0 06.60.6.4.50 S4MF6 4MF6 7 /6-4 06.53.53.7.44 S6MF6 G6MF6 6MF6 5 /8-8 06.60.6.6.6 S8MF8 G8MF8 8MF8 3 /4-8 08.79.6.38.75 Male S Inverted Flare Swivel 45 lbow (MF) S4MF4 G4MF4 4MF4 7 /6-4 04.67.75.7.96.44 S4MF6 4MF6 7 /6-4 06.8.8.7.96.44 S5MF6 G5MF6 5MF6 /-0 06.88.89.4.96.50 S6MF6 G6MF6 6MF6 5 /8-8 06.88.89.6.96.6 S8MF8 G8MF8 8MF8 3 /4-8 08 3.07.90.38.93.75 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 84

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Thread Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K. Size Male S Inverted Flare Swivel 90 lbow (MFB) S4MFB4 G4MFB4 4MFB4 7 /6-4 04.9.37.7.69.44 S5MFB4 5MFB4 /-0 04.9.37.7.73.50 S4MFB6 4MFB6 7 /6-4 06.43.44.7.69.44 S5MFB6 G5MFB6 5MFB6 /-0 06.5.5.4.73.50 S6MFB6 G6MFB6 6MFB6 5 /8-8 06.5.5.6.73.6 S8MFB8 G8MFB8 8MFB8 3 /4-8 08.73.56.38.75.75 S Code 6 Split Flange (FL) For flanges, split flange halves, kits and O-rings, see page 76-79 S8FL8 G8FL8 8FL8 B8FL8.9 08 3.3.06.38 SFL8 GFL8 FL8 BFL8.50 08 3.7.0.38 SFL0 GFL0 FL0 BFL0.50 0 3.6.0.50 SFL GFL FL BFL.50 3.3..6 S6FL G6FL 6FL B6FL.75 3.3..6 S0FL G0FL 0FL B0FL.00 3.6.4.6 SFL6 FL6.50 6 3.50.4.58 S6FL6 G6FL6 6FL6 B6FL6.75 6 3.49.4.8 S0FL6 G0FL6 0FL6 B0FL6.00 6 3.79.44.8 S4FL6 G4FL6 4FL6 B4FL6.38 6 3.83.47.8 S6FL0 G6FL0 B6FL0.75 0 3.94..8 P6FL0*.75 0 3.94..8 T6FL0**.75 0 3.94..8 S0FL0 G0FL0 B0FL0.00 0 4.4.5.05 P0FL0*.00 0 4.4.5.05 T0FL0**.00 0 4.4.5.05 S4FL0 G4FL0 B4FL0.38 0 4.7.54.05 P4FL0*.38 0 4.7.54.05 T4FL0**.38 0 4.7.54.05 S3FL0 G3FL0 B3FL0.8 0 4.7.54.0 P3FL0*.8 0 4.7.54.0 T3FL0**.8 0 4.7.54.0 S0FL4 G0FL4 0FL4.00 4 4.37.55.05 S4FL4 G4FL4 4FL4 B4FL4.38 4 4.40.58.6 S3FL4 G3FL4 3FL4 B3FL4.8 4 4.40.58.9 S4FL3 G4FL3 4FL3.38 3 4.6.63.6 B4FL3.38 3 5..63. S3FL3 G3FL3 3FL3.8 3 4.6.63.75 B3FL3.8 3 5..63.6 S40FL3 G40FL3 40FL3 3.3 3 4.60.63.75 B40FL3 3.3 3 5..63.6 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 85

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 45 lbow (FL) For flanges, split flange halves, kits and O-rings, see page 76-79 S8FL8 G8FL8 8FL8.9 08 3..94.37.78 B8FL8.9 08 3.3.96.37.78 SFL8 GFL8 FL8.50 08 3.64.47.37.00 BFL8.50 08 3.66.50.37.00 SFL0 GFL0 FL0.50 0 3.68.53.46.00 BFL0.50 0 3.6.46.50.00 SFL GFL FL.50 3.67.48.58.0 BFL.50 3.66.46.56.00 S6FL G6FL 6FL.75 4.6.97.58.06 B6FL.75 4.6.97.56.06 B0FL.00 3.66.46.56.00 SFL6 FL6.50 6 3.93.57.58.0 S6FL6 G6FL6 6FL6 B6FL6.75 6 4.35 3.00.76.06 S0FL6 G0FL6 0FL6.00 6 4.8 3.45.76.5 B0FL6.00 6 4.8 3.46.76.5 S6FL0 G6FL0 B6FL0.75 0 4.80 3.06.76.06 P6FL0*.75 0 4.80 3.06.76.06 T6FL0**.75 0 4.80 3.06.76.06 S0FL0 G0FL0.00 0 5.8 3.55.0.8 B0FL0.00 0 5.6 3.5.0.5 P0FL0*.00 0 5.8 3.55.0.8 T0FL0**.00 0 5.8 3.55.0.8 S4FL0 G4FL0 B4FL0.37 0 5.94 4.0.0.4 P4FL0*.37 0 5.94 4.0.0.4 T4FL0**.37 0 5.94 4.0.0.4 S0FL4 G0FL4 0FL4.00 4 4.54.7.6.08 S4FL4 G4FL4 4FL4.37 4 6.07 4.5.6.4 B4FL4.37 4 6.07 4.5.9.4 S3FL4 3FL4.8 4 6.07 4.5.6.4 B3FL4.8 4 7.30 5.47.9.00 S4FL3 G4FL3 4FL3.37 3 6.7 4.9.6.4 S3FL3 G3FL3 3FL3.8 3 7.49 5.5.75.00 B3FL3.8 3 7.53 5.05.6.00 S40FL3 G40FL3 40FL3 3.3 3 5.7 3.9.75.30 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 86

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 90 lbow (FLB) For flanges, split flange halves, kits and O-rings, see page 76-79 S8FLB8 G8FLB8 8FLB8.9 08.86.69.37.63 B8FLB8.9 08.87.70.37.63 SFLB8 GFLB8 FLB8.50 08 3.45.8.37.3 BFLB8.50 08 3.38..37.3 SFLB0 GFLB0 FLB0.50 0 3.44.9.50.3 BFLB0.50 0 3.46.30.50.3 SFLB GFLB FLB.50 3.49.30.58.3 BFLB.50 3.49.30.56.3 S6FLB G6FLB 6FLB.75 4.03.84.58.38 B6FLB.75 4.03.84.56.38 S0FLB 0FLB.00 4.67 3.48.58.6 B0FLB.00 3.49.30.56.6 SFLB6 GFLB6 FLB6.50 6 4.0.85.76.7 S6FLB6 G6FLB6 6FLB6.75 6 4..86.76.38 B6FLB6.75 6 4..87.76.38 S0FLB6 G0FLB6 0FLB6.00 6 4.85 3.50.76.6 B0FLB6.00 6 4.86 3.50.76.6 S4FLB6 G4FLB6 4FLB6 B4FLB6.37 6 5.59 4.4.76 3. S6FLB0 G6FLB0 B6FLB0.75 0 4.66.93.76.38 P6FLB0*.75 0 4.66.93.76.38 T6FLB0**.75 0 4.66.93.76.38 S0FLB0 G0FLB0 B0FLB0.00 0 5.30 3.57.0.6 P0FLB0*.00 0 5.30 3.57.0.6 T0FLB0**.00 0 5.30 3.57.0.6 S4FLB0 G4FLB0 B4FLB0.37 0 6.04 4.3.0 3. P4FLB0*.37 0 6.04 4.3.0 3. T4FLB0**.37 0 6.04 4.3.0 3. S3FLB0 G3FLB0.8 0 4.5.5.0.56 S6FLB4 G6FLB4 6FLB4.75 4 4.80.97.76.38 B6FLB4.75 4 4.78.96.76.37 S0FLB4 G0FLB4 0FLB4.00 4 5.43 3.6.0.6 S4FLB4 G4FLB4 4FLB4.37 4 6.8 4.35.6 3. B4FLB4.37 4 6.8 4.35.9 3. S3FLB4 G3FLB4 3FLB4.8 4 7.8 5.45.6 4.50 B3FLB4.8 4 7.8 5.45.9 4.50 S4FLB3 4FLB3.37 3 6.37 4.40.6 3. B4FLB3.37 3 6.85 4.37. 3. S3FLB3 G3FLB3 3FLB3.8 3 7.47 5.49.75 4.50 B3FLB3.8 3 7.0 4.7.6 4.50 S40FLB3 G40FLB3 40FLB3 3.3 3 7.47 5.49.75 4.56 B40FLB3 3.3 3 7.0 4.7.6 4.56 S Code 6 Split Flange / lbow (FL) For flanges, split flange halves, kits and O-Rings, see page 76-79 B8FL8.9 08 3.38.0.37.36 BFL8.50 08 3.97.80.37.44 BFL.50 4.0.8.56.44 B6FL.75 4.45 3.6.56.45 S6FL6 6FL6 B6FL6.75 6 4.64 3.9.76.45 S0FL6 0FL6 B0FL6.00 6 5. 3.77.76.46 S0FL0 B0FL0.00 0 5.57 3.83.0.46 P0FL0*.00 0 5.57 3.83.0.46 T0FL0**.00 0 5.57 3.83.0.46 B4FL0.37 0 6.3 4.58.0.56 B4FL4.37 4 6.45 4.63.9.56 B3FL3.8 3.3 4.64.6.88 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 87

GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 67 / lbow (FL) For flanges, split flange halves, kits and O-rings, see page 76-79 B8FL8.9 08 3.40.4.37.7 BFL.50 4. 3.04.56.59 B6FL.75 4.84 3.65.56.74 B6FL6.75 6 5.03 3.67.76.74 B0FL6.00 6 5.73 4.38.76.83 P0FL0*.00 0 6.8 4.44.0.83 T0FL0**.00 0 6.8 4.44.0.83 S0FL0 B0FL0.00 0 6.8 4.44.0.83 B4FL4.37 4 7. 5.39.9.4 B3FL3.8 3 7.57 5.08.6 3.5 S Code 6 Split Flange 30 lbow (FLF) For flanges, split flange halves, kits and O-rings, see page 76-79 B8FLF8.9 08 3.3.5.37.50 BFLF.50 3.94.75.56.6 B6FLF.75 4.38 3.9.56.64 B6FLF6.75 6 4.57 3..76.64 B0FLF6.00 6 5.04 3.69.76.67 B0FLF0.00 0 5.49 3.76.0.67 B4FLF0.37 0 6. 4.49.0.8 B4FLF4.37 4 6.36 4.54.9.8 B3FLF3.8 3 7.37 4.88.6.5 B40FLF3 3.3 3 7.4 4.93.6.8 S Code 6 Split Flange 60 lbow (FLG) For flanges, split flange halves, kits and O-rings, see page 76-79 B8FLG8.9 08 3.57.40.37.3 BFLG.50 4.4 3.3.56.39 B6FLG.75 5.05 3.86.56.5 S6FLG6 G6FLG6 6FLG6 B6FLG6.75 6 5.4 3.89.76.5 S0FLG6 B0FLG6.00 6 5.95 4.60.76.57 B0FLG0.00 0 6.40 4.67.0.57 B4FLG0.37 0 7.34 5.6.0.8 S4FLG4 G4FLG4 4FLG4 B4FLG4.37 4 7.47 5.65.9.8 B3FLG3.8 3 7.68 5.0.6.87 *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 88

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Straight split flange Code 6 (S J58) F.6 4.3-4.6 05.8.39 60.8.77 45.0 6F.88 47.6-4.33 0.0.56 65.0.77 45.0 6F6.88 47.6-6 5.3 35..76 70..56 65.0 Z6F6.88 47.6-6 5.3 35..76 70..56 65.0 0F6. 54.0-6 5. 3.6.66 67.6.56 65.0 0F0. 54.0-0 5.85 48.6.90 73.6.95 75.0 Z0F6. 54.0-6 5. 3.6.66 67.6.56 65.0 Z0F0. 54.0-0 5.85 48.6.90 73.6.95 75.0 4F0.5 63.5-0 7.3 85.6 4.35 0.6.95 75.0 Z4F0.5 63.5-0 7.3 85.6 4.35 0.6.95 75.0 4F4.5 63.5-4 7.46 89.6 4.39.6 3.07 78.0 Z4F4.5 63.5-4 7.46 89.6 4.39.6 3.07 78.0 3F4 3.3 79.4-4 7.90 00.6 4.83.6 3.07 78.0 Z3F4 3.3 79.4-4 7.90 00.6 4.83.6 3.07 78.0 3F3 3.3 79.4-3 7.98 0.7 4.9 4.7 3.07 78.0 Z3F3 3.3 79.4-3 7.98 0.7 4.9 4.7 3.07 78.0 45 split flange - Code 6 (S J58) F.6 4.3-4.93 5.3 3.6 80.3.77 45.0.06 7.0 6F.88 47.6-5.37 36.5 3.60 9.5.77 45.0.6 3.0 6F6.88 47.6-6 6.37 6.7 3.8 96.7.56 65.0.6 3.0 Z6F6.88 47.6-6 6.37 6.7 3.8 96.7.56 65.0.6 3.0 0F6. 54.0-6 6.99 77.4 4.43.4.56 65.0.54 39.0 0F0. 54.0-0 7.6 93.4 4.66 8.4.95 75.0.54 39.0 Z0F6. 54.0-6 6.99 77.4 4.43.4.56 65.0.54 39.0 Z0F0. 54.0-0 7.6 93.4 4.66 8.4.95 75.0.54 39.0 4F0.5 63.5-0 8. 06.3 5.7 3.3.95 75.0.77 45.0 Z4F0.5 63.5-0 8. 06.3 5.7 3.3.95 75.0.77 45.0 4F4.5 63.5-4 8.8 0.3 5. 3.3 3.07 78.0.77 45.0 Z4F4.5 63.5-4 8.8 0.3 5. 3.3 3.07 78.0.77 45.0 3F4 3.3 79.4-4 9.73 47. 6.66 69. 3.07 78.0.6 57.5 Z3F4 3.3 79.4-4 9.73 47. 6.66 69. 3.07 78.0.6 57.5 3F3 3.3 79.4-3 9.8 49.3 6.74 7.3 3.07 78.0.6 57.5 Z3F3 3.3 79.4-3 9.8 49.3 6.74 7.3 3.07 78.0.6 57.5 90 split flange - Code 6 (S J58) FB.6 4.3-4.7 0.0.95 75.0.77 45.0.3 59.0 6FB.88 47.6-5.7 3.4 3.40 86.4.77 45.0.80 7.0 6FB6.88 47.6-6 6.7 56.6 3.6 9.6.56 65.0.80 7.0 Z6FB6.88 47.6-6 6.7 56.6 3.6 9.6.56 65.0.80 7.0 0FB6. 54.0-6 6.79 7.4 4.3 07.4.56 65.0 3.50 89.0 0FB0. 54.0-0 7.4 88.4 4.46 3.4.95 75.0 3.50 89.0 Z0FB6. 54.0-6 6.79 7.4 4.3 07.4.56 65.0 3.50 89.0 Z0FB0. 54.0-0 7.4 88.4 4.46 3.4.95 75.0 3.50 89.0 4FB0.5 63.5-0 7.9 0. 4.96 6..95 75.0 4.09 04.0 Z4FB0.5 63.5-0 7.9 0. 4.96 6..95 75.0 4.09 04.0 4FB4.5 63.5-4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 Z4FB4.5 63.5-4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 3FB4 3.3 79.4-4 9.59 43.6 6.5 65.6 3.07 78.0 5.43 38.0 Z3FB4 3.3 79.4-4 9.59 43.6 6.5 65.6 3.07 78.0 5.43 38.0 3FB3 3.3 79.4-3 9.67 45.7 6.60 67.7 3.07 78.0 5.43 38.0 Z3FB3 3.3 79.4-3 9.67 45.7 6.60 67.7 3.07 78.0 5.43 38.0 NOT: For flanges, split flange halves, kits and o-rings, see pages 76-79. K L K Code 6 Code 6 Code 6 Straight Split Flange 45 lbow Split Flange 90 lbow Split Flange L K L 00

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73 (, 6), G506 Fittings for use on 4 wire construction Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Straight split flange - Code 6 (S J58) FL.50 38. - 3.9 99.5.5 54.5.77 45.0 6FL.75 44.4-3.78 96..0 5..77 45.0 6FL6.75 44.4-6 4.78.3. 56.3.56 65.0 0FL6.00 50.8-6 4.94 5.5.38 60.5.56 65.0 0FL0.00 50.8-0 5.57 4.5.6 66.5.95 75.0 4FL0.38 60.3-0 6.45 63.8 3.50 88.8.95 75.0 4FL4.38 60.3-4 6.6 67.8 3.54 89.8 3.07 78.0 3FL4.8 7.4-4 6.73 70.9 3.66 9.9 3.07 78.0 3FL3.8 7.4-3 6.8 73.0 3.74 95.0 3.07 78.0 45 split flange - Code 6 (S J58) FL.50 38. - 4.93 5.3 3.6 80.3.77 45.0.06 7.0 6FL.75 44.4-5.37 36.5 3.60 9.5.77 45.0.6 3.0 6FL6.75 44.4-6 6.37 6.7 3.8 96.7.56 65.0.6 3.0 0FL6.00 50.8-6 6.99 77.4 4.43.4.56 65.0.54 39.0 0FL0.00 50.8-0 7.6 93.4 4.66 8.4.95 75.0.54 39.0 4FL0.38 60.3-0 8. 06.3 5.7 3.3.95 75.0.77 45.0 4FL4.38 60.3-4 8.8 0.3 5. 3.3 3.07 78.0.77 45.0 3FL4.8 7.4-4 9.73 47. 6.66 69. 3.07 78.0.6 57.5 3FL3.8 7.4-3 9.8 49.3 6.74 7.3 3.07 78.0.6 57.5 90 split flange - Code 6 (S J58) FLB.50 38. - 4.7 0.0.95 75.0.77 45.0.3 59.0 6FLB.75 44.4-5.7 3.4 3.40 86.4.77 45.0.80 7.0 6FLB6.75 44.4-6 6.7 56.6 3.6 9.6.56 65.0.80 7.0 0FLB6.00 50.8-6 6.79 7.4 4.3 07.4.56 65.0 3.50 89.0 0FLB0.00 50.8-0 7.4 88.4 4.46 3.4.95 75.0 3.50 89.0 4FLB0.38 60.3-0 7.9 0. 4.96 6..95 75.0 4.09 04.0 4FLB4.38 60.3-4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 3FLB4.8 7.4-4 9.59 43.6 6.5 65.6 3.07 78.0 5.43 38.0 3FLB3.8 7.4-3 9.67 45.7 6.60 67.7 3.07 78.0 5.43 38.0 NOT: For flanges, split flange halves, kits and o-rings, see pages 76-79. K L K Code 6 Code 6 Code 6 Straight Split Flange 45 lbow Split Flange 90 lbow Split Flange L K L 0

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Compatible only with -rings found on page 78. K L Cat Flange Cat Flange Cat Flange Straight 45 lbow 90 lbow Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Caterpillar - Straight split flange CT.6 4.3-4.38.3.6 66.3.77 45.0 6CT.88 47.6-4.5 4.7.74 69.7.77 45.0 6CT6.88 47.6-6 5.5 39.9.95 74.9.56 65.0 Z6CT6.88 47.6-6 5.5 39.9.95 74.9.56 65.0 0CT6. 54.0-6 5.37 36.5.8 7.5.56 65.0 0CT0. 54.0-0 6.00 5.5 3.05 77.5.95 75.0 Z0CT6. 54.0-6 5.37 36.5.8 7.5.56 65.0 Z0CT0. 54.0-0 6.00 5.5 3.05 77.5.95 75.0 Z4CT0.5 63.5-0 7.37 87.3 4.4.3.95 75.0 Z4CT4.5 63.5-4 7.53 9.3 4.46 3.3 3.07 78.0 Z3CT4 3.3 79.4-4 7.96 0.3 4.89 4.3 3.07 78.0 Z3CT3 3.3 79.4-3 8.05 04.4 4.98 6.4 3.07 78.0 Caterpillar - 45 split flange CT.6 4.3-5.08 9. 3.3 84..77 45.0. 30.9 6CT.88 47.6-5.50 39.8 3.73 94.8.77 45.0.39 35.3 6CT6.88 47.6-6 6.50 65.0 3.94 00.0.56 65.0.39 35.3 Z6CT6.88 47.6-6 6.50 65.0 3.94 00.0.56 65.0.39 35.3 0CT6. 54.0-6 7.0 80. 4.54 5..56 65.0.65 4.8 0CT0. 54.0-0 7.7 96. 4.77..95 75.0.65 4.8 Z0CT6. 54.0-6 7.0 80. 4.54 5..56 65.0.65 4.8 Z0CT0. 54.0-0 7.7 96. 4.77..95 75.0.65 4.8 Z4CT0.5 63.5-0 8.7 07.5 5. 3.5.95 75.0.8 46. Z4CT4.5 63.5-4 8.33.5 5.6 33.5 3.07 78.0.8 46. Z3CT4 3.3 79.4-4 9.78 48.4 6.7 70.4 3.07 78.0.3 58.7 Z3CT3 3.3 79.4-3 9.86 50.5 6.79 7.5 3.07 78.0.3 58.7 K L K L Caterpillar - 90 split flange CTB.6 4.3-4.7 0.0.95 75.0.77 45.0.54 64.5 6CTB.88 47.6-5.7 3.4 3.40 86.4.77 45.0.98 75.7 6CTB6.88 47.6-6 6.7 56.6 3.6 9.6.56 65.0.98 75.7 Z6CTB6.88 47.6-6 6.7 56.6 3.6 9.6.56 65.0.98 75.7 0CTB6. 54.0-6 6.79 7.4 4.3 07.4.56 65.0 3.66 9.9 0CTB0. 54.0-0 7.4 88.4 4.46 3.4.95 75.0 3.66 9.9 Z0CTB6. 54.0-6 6.79 7.4 4.3 07.4.56 65.0 3.66 9.9 Z0CTB0. 54.0-0 7.4 88.4 4.46 3.4.95 75.0 3.66 9.9 Z4CTB0.5 63.5-0 7.9 0. 4.96 6..95 75.0 4.6 05.7 Z4CTB4.5 63.5-4 8.07 05. 5.00 7. 3.07 78.0 4.6 05.7 Z3CTB4 3.3 79.4-4 9.59 43.6 6.5 65.6 3.07 78.0 5.50 39.6 Z3CTB3 3.3 79.4-3 9.67 45.7 6.60 67.7 3.07 78.0 5.50 39.6 0

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Compatible only with -rings found on page 78. Cat Flange Cat Flange Cat Flange Cat Flange.5 lbow 30 lbow 60 lbow 67.5 lbow Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Caterpillar -.5 split flange CT.6 4.3-5.43 37.9 3.66 9.9.77 45.0 0.54 3.7 6CT6.88 47.6-6 6.88 74.8 4.3 09.8.56 65.0 0.60 5.3 Z6CT6.88 47.6-6 6.88 74.8 4.3 09.8.56 65.0 0.60 5.3 0CT6. 54.0-6 7.56 9.9 5.00 6.9.56 65.0 0.70 7.8 Z0CT0. 54.0-0 8.9 07.9 5.3 3.9.95 75.0 0.70 7.8 Z4CT0.5 63.5-0 8.67 0. 5.7 45..95 75.0 0.76 9.4 Z4CT4.5 63.5-4 8.8 4. 5.75 46. 3.07 78.0 0.76 9.4 Caterpillar - 30 split flange CTF.6 4.3-5.34 35.7 3.57 90.7.77 45.0 0.75 9. 6CTF6.88 47.6-6 6.79 7.4 4.3 07.4.56 65.0 0.85.6 Z6CTF6.88 47.6-6 6.79 7.4 4.3 07.4.56 65.0 0.85.6 0CTF6. 54.0-6 7.45 89. 4.89 4..56 65.0.00 5.3 Z0CTF0. 54.0-0 8.08 05. 5. 30..95 75.0.00 5.3 Z4CTF0.5 63.5-0 8.55 7. 5.59 4..95 75.0.09 7.7 Z4CTF4.5 63.5-4 8.70. 5.63 43. 3.07 78.0.09 7.7 Z3CTF4 3.3 79.4-4 0.6 60.5 7.9 8.5 3.07 78.0.37 34.8 Z3CTF3 3.3 79.4-3 0.34 6.6 7.7 84.6 3.07 78.0.37 34.8 Caterpillar - 60 split flange CTG.6 4.3-5.83 48. 4.06 03..77 45.0.66 4.3 6CTG6.88 47.6-6 7.45 89.3 4.89 4.3.56 65.0.9 48.7 Z6CTG6.88 47.6-6 7.45 89.3 4.89 4.3.56 65.0.9 48.7 0CTG6. 54.0-6 8.36.4 5.80 47.4.56 65.0.33 59.3 Z0CTG0. 54.0-0 8.99 8.4 6.04 53.4.95 75.0.33 59.3 Z4CTG0.5 63.5-0 9.70 46.4 6.75 7.4.95 75.0.6 66.6 Z4CTG4.5 63.5-4 9.86 50.4 6.79 7.4 3.07 78.0.6 66.6 Z3CTG4 3.3 79.4-4.94 303. 8.87 5. 3.07 78.0 3.44 87.3 Z3CTG3 3.3 79.4-3.0 305.3 8.95 7.3 3.07 78.0 3.44 87.3 Caterpillar - 67.5 split flange CT.6 4.3-5.60 4. 3.83 97..77 45.0.90 48. 6CT6.88 47.6-6 7.8 8.5 4.6 7.5.56 65.0.0 55.8 Z6CT6.88 47.6-6 7.8 8.5 4.6 7.5.56 65.0.0 55.8 0CT6. 54.0-6 8.04 04. 5.48 39..56 65.0.68 68. Z0CT0. 54.0-0 8.67 0. 5.7 45..95 75.0.68 68. Z4CT0.5 63.5-0 9.33 37.0 6.38 6.0.95 75.0 3.0 76.8 03

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73 (, 6), G506 Fittings for use on 4 wire construction BSPP Swivel BSPP Swivel BSPP Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm BSP/JIS Female Swivel (BF) BF G 3/4-3.7 83.0.50 38.0.77 45.0 6BF G - 3. 8.7.44 36.7.77 45.0 6BF6 G -6 4. 06.9.65 4.9.56 65.0 0BF6 G /4-6 4.3 04.9.57 39.9.56 65.0 0BF0 G /4-0 4.76 0.9.8 45.9.95 75.0 4BF4 G / -4 6.04 53.5.97 75.5 3.07 78.0 3BF3 G -3 6.8 59.5 3. 8.5 3.07 78.0 BSP/JIS Female Swivel, 45 elbow (BF) BF G 3/4-4.76.0.99 76.0.77 45.0.0 6.0 6BF G - 5.3 30.4 3.36 85.4.77 45.0.8 30.0 6BF6 G -6 6.3 55.6 3.57 90.6.56 65.0.8 30.0 0BF6 G /4-6 6.57 66.9 4.0 0.9.56 65.0.34 34.0 0BF0 G /4-0 7.9 8.6 4.5 07.9.95 75.0.34 34.0 4BF4 G / -4 8.0 08. 5.3 30. 3.07 78.0.69 43.0 3BF3 G -3 9.56 4.8 6.49 64.8 3.07 78.0.0 5.0 BSP/JIS Female Swivel, 90 elbow (BFB) BFB G 3/4-4.5 4.5.74 69.5.77 45.0.4 57.0 6BFB G - 4.94 5.6 3.7 80.6.77 45.0.68 68.0 6BFB6 G -6 5.94 50.8 3.38 85.8.56 65.0.68 68.0 0BFB6 G /4-6 6.44 63.7 3.89 98.7.56 65.0 3. 79.0 0BFB0 G /4-0 7.07 79.7 4. 04.7.95 75.0 3. 79.0 4BFB4 G / -4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 3BFB3 G -3 9.67 45.7 6.60 67.7 3.07 78.0 5.4 33.0 NOT: The JIS parallel thread and BSPP connection are interchangeable. 04

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction KOS Swivel KOS Swivel KOS Swivel Straight 45 lbow 90 lbow Insertion Fitting Tube Length Part Number Thread O.. Size L inch mm inch mm inch mm inch mm KO Female Swivel, eavy uty (S) 0S M36 x 5-3.87 98.4.0 53.4.77 45.0 5S M4 x 30-3.80 96.6.03 5.6.77 45.0 5S6 M4 x 30-6 4.80.8.4 56.8.56 65.0 Z5S6 M4 x 30-6 4.80.8.4 56.8.56 65.0 3S6 M5 x 38-6 4.8.3.6 57.3.56 65.0 3S0 M5 x 38-0 5.44 38.3.49 63.3.95 75.0 Z3S6 M5 x 38-6 4.8.3.6 57.3.56 65.0 Z3S0 M5 x 38-0 5.44 38.3.49 63.3.95 75.0 KO Female Swivel, eavy uty, 45 lbow (S) 0S M36 x 5-5.3 30.3 3.36 85.3.77 45.0.6 3.0 5S M4 x 30-5.49 39.4 3.7 94.4.77 45.0.38 35.0 5S6 M4 x 30-6 6.48 64.6 3.9 99.6.56 65.0.38 35.0 Z5S6 M4 x 30-6 6.48 64.6 3.9 99.6.56 65.0.38 35.0 3S6 M5 X 38-6 6.98 77.3 4.4.3.56 65.0.54 39.0 3S0 M5 x 38-0 7.6 93.3 4.66 8.3.95 75.0.54 39.0 Z3S6 M5 X 38-6 6.98 77.3 4.4.3.56 65.0.54 39.0 Z3S0 M5 x 38-0 7.6 93.3 4.66 8.3.95 75.0.54 39.0 KO Female Swivel, eavy uty, 90 elbow (SB) 0SB M36 x 5-4.7 0.0.95 75.0.77 45.0.56 65.0 5SB M4 X 30-5.9 3.4 3.40 86.4.77 45.0.99 76.0 5SB6 M4 x 30-6 6.7 56.8 3.6 9.8.56 65.0.99 76.0 Z5SB6 M4 x 30-6 6.7 56.8 3.6 9.8.56 65.0.99 76.0 3SB6 M5 X 38-6 6.79 7.4 4.3 07.4.56 65.0 3.50 89.0 3SB0 M5 x 38-0 7.4 88.4 4.46 3.4.95 75.0 3.50 89.0 Z3SB6 M5 x 38-6 6.79 7.4 4.3 07.4.56 65.0 3.50 89.0 Z3SB0 M5 x 38-0 7.4 88.4 4.46 3.4.95 75.0 3.50 89.0 05

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction L ORS Swivel ORS Swivel ORS Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm Female ORS Swivel, Straight FR 3/6- - 3.77 95.9.00 50.9.77 45.0 6FR 7/6- - 3.33 84.6.56 39.6.77 45.0 6FR6 7/6- -6 4.7 9.5.5 54.5.56 65.0 Z6FR6 7/6- -6 4.7 9.5.5 54.5.56 65.0 0FR6 /6- -6 4.9 06.4.63 4.4.56 65.0 0FR0 /6- -0 5.38 36.7.43 6.7.95 75.0 4FR4 - -4 5.00 6.9.93 48.9 3.07 78.0 Z0FR6 /6- -6 4.9 06.4.63 4.4.56 65.0 Z0FR0 /6- -0 5.38 36.7.43 6.7.95 75.0 Z4FR4 - -4 5.00 6.9.93 48.9 3.07 78.0 Female ORS Swivel, 45 elbow FR 3/6- - 4.68 8.9.9 73.9.77 45.0 0.94 4.0 6FR 7/6- - 5.05 8.4 3.8 83.4.77 45.0.0 8.0 6FR6 7/6- -6 6.04 53.4 3.48 88.4.56 65.0.0 8.0 Z6FR6 7/6- -6 6.04 53.4 3.48 88.4.56 65.0.0 8.0 0FR6 /6- -6 6.45 63.9 3.89 98.9.56 65.0. 3.0 0FR0 /6- -0 7.08 79.8 4.3 04.8.95 75.0. 3.0 Z0FR6 /6- -6 6.45 63.9 3.89 98.9.56 65.0. 3.0 Z0FR0 /6- -0 7.08 79.8 4.3 04.8.95 75.0. 3.0 L L Female ORS Swivel, 90 elbow FRB 3/6- - 4.5 4.5.74 69.5.77 45.0.8 58.0 6FRB 7/6- - 4.94 5.6 3.7 80.6.77 45.0.80 7.0 6FRB6 7/6- -6 5.93 50.6 3.37 85.6.56 65.0.80 7.0 Z6FRB6 7/6- -6 5.93 50.6 3.37 85.6.56 65.0.80 7.0 0FRB6 /6- -6 6.45 63.7 3.89 98.7.56 65.0 3.07 78.0 0FRB0 /6- -0 7.07 79.6 4. 04.6.95 75.0 3.07 78.0 Z0FRB6 /6- -6 6.45 63.7 3.89 98.7.56 65.0 3.07 78.0 Z0FRB0 /6- -0 7.07 79.6 4. 04.6.95 75.0 3.07 84.0 06

GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction L S 37 (JIC) Swivel S 37 (JIC) Swivel S 37 (JIC) Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm S 37 (JIC) Swivel FJ /6- - 4.0 04..33 59..77 45.0 6FJ 5/6- - 4.0 06.6.43 6.6.77 45.0 6FJ6 5/6- -6 5.9 3.8.63 66.8.56 65.0 Z6FJ6 5/6- -6 4.59 6.6.03 5.6.56 65.0 0FJ6 5/8- -6 5.6 33.7.70 68.7.56 65.0 0FJ0 5/8- -0 5.89 49.7.94 74.7.95 75.0 Z0FJ0 5/8- -0 5.5 33.5.30 58.5.95 75.0 4FJ0 7/8- -0 5.86 48.8.9 73.8.95 75.0 Z4FJ0 7/8- -0 5.86 48.8.9 73.8.95 75.0 4FJ4 7/8- -4 6.0 5.8.94 74.8 3.07 78.0 Z4FJ4 7/8- -4 6.0 5.8.94 74.8 3.07 78.0 3FJ3 /- -3 6.40 6.5 3.33 84.5 3.07 78.0 Z3FJ3 /- -3 6.40 6.5 3.33 84.5 3.07 78.0 S 37 (JIC) Swivel, 45 elbow FJ /6- - 4.80.9 3.03 76.9.77 45.0.06 7.0 6FJ 5/6- - 5.5 33.4 3.48 88.4.77 45.0.30 33.0 6FJ6 5/6- -6 6.5 58.6 3.69 93.6.56 65.0.30 33.0 0FJ6 5/8- -6 6.70 70. 4.4 05..56 65.0.46 37.0 0FJ0 5/8- -0 7.33 86. 4.38..95 75.0.46 37.0 Z0FJ0 5/8- -0 7.33 86. 4.38..95 75.0.46 37.0 4FJ4 7/8- -4 8.0 08. 5.3 30. 3.07 78.0.69 43.0 Z4FJ4 7/8- -4 8.0 08. 5.3 30. 3.07 78.0.69 43.0 S 37 (JIC) Swivel, 90 elbow FJB /6- - 4.5 4.5.74 69.5.77 45.0.8 58.0 6FJB 5/6- - 4.94 5.6 3.7 80.6.77 45.0.80 7.0 6FJB6 5/6- -6 5.94 50.8 3.38 85.8.56 65.0.80 7.0 0FJB6 5/8- -6 6.45 63.9 3.89 98.9.56 65.0 3.3 8.0 0FJB0 5/8- -0 7.08 79.9 4.3 04.9.95 75.0 3.3 8.0 Z0FJB0 5/8- -0 7.08 79.9 4.3 04.9.95 75.0 3.3 8.0 4FJB4 7/8- -4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 Z4FJB4 7/8- -4 8.07 05. 5.00 7. 3.07 78.0 4.09 04.0 L L 07

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) Male pipe S 37 (JIC) swivel S 37 (JIC) S straight thread FC956/FJ9759 FC955/FJ9760 male flare O-Ring male FJ9568 FJ9567 FC963/FJ995 FC97/FJ996 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size φ Male pipe FC956 0406S 860 4 6S FC347 06S /4-8 06.44.4.6.69 FC956 0606S 860 6 6S FC347 06S 3 /8-8 06.44.4.6.69 FC956 0806S 860 8 6S FC347 06S /-4 06.44.4.6.88 FC956 0408S 860 4 8S FC347 08S /4-8 08.60.5.30.8 FC956 0608S 860 6 8S FC347 08S 3 /8-8 08.60.5.38.8 FC956 0808S 860 8 8S FC347 08S /-4 08.84.50.38.88 FC956 08S 860 8S FC347 08S 3 /4-4 08.60.5.38.06 FC956 080S 860 8 0S FC347 0S /-4 0 3.00.53.50.00 FJ9759 S FC4 S FC40 S 3 /4-4 3.38.66.6. FJ9759 66S FC4 66S FC40 6S - / 6 3.76.86.78.38 FJ9759 00S * * /4- / 0 4.78.3.05.8 FJ9759 44S * * /- / 4 5.7.4.6.00 FJ9568 33S * * - / 3 5.7.35.69.6 S 37 (JIC) swivel FC955 0606S 86006 6S FC347 06S 9 /6-8 06.64.44.6.69.69 FC955 0806S 86008 6S FC347 06S 3 /4-6 06.74.54.6.88.69 FC955 0808S 86008 8S FC347 08S 3 /4-6 08.90.55.38.88.8 FC955 008S 86000 8S FC347 08S 7 /8-4 08 3.0.66.38.00.8 FC955 08S 8600 8S FC347 08S /6-08.85.50.38.5.00 FC955 00S 86000 0S FC347 0S 7 /8-4 0 3..76.50.00.00 FC955 0S 8600 0S FC347 0S /6-0 3.5.78.50.5.00 FJ9760 S FJ8760 S FC40 S /6-3.53.80.6.5.06 FJ9760 6S FJ8760 6S FC40 S 5 /6-3.76.04.6.50.5 FJ9760 66S FJ8760 66S FC40 6S 5 /6-6 3.8.9.78.50.5 FJ9760 00S * * 5 /8-0 4.48.83.05.00 FJ9760 44S * * 7 /8-4 4.9.00.6.5 FJ9567 33S * * /- 3 5.68.33.69.88 S 37 (JIC) male flare FC963 0606S 8603 6 6S FC347 06S 9 /6-8 06.43.4.6.69 FC963 0806S 8603 8 6S FC347 06S 3 /4-6 06.53.34.6.8 FC963 0808S 8603 8 8S FC347 08S 3 /4-6 08.69.35.38.8 FC963 008S 8603 0 8S FC347 08S 7 /8-4 08.85.5.38.94 FC963 08S 8603 8S FC347 08S /6-08.78.43.38. FC963 00S 8603 0 0S FC347 0S 7 /8-4 0 3.00.54.48.00 FC963 0S 8603 0S FC347 0S /6-0.93.46.50. FJ995 S FC474 S FC40 S /6-3.49.77.6. FJ995 6S FC474 6S FC40 S 5 /6-3.30.58.6.38 FJ995 66S FC474 66S FC40 6S 5 /6-6 3.78.88.78.38 S O-Ring male, see page 78 for O-Rings FC97 0606S 86 6 6S FC347 06S 9 /6-8 06.7.07.6.69 FC97 0806S 86 8 6S FC347 06S 3 /4-6 06..93.6.88 FC97 0808S 86 8 8S FC347 08S 3 /4-6 08.53.9.38.88 FC97 008S 86 0 8S FC347 08S 7 /8-4 08.35.00.38.00 FC97 00S 86 0 0S FC347 0S 7 /8-4 0.74.8.50.00 FC97 0S 86 0S FC347 0S /6-0.66.9.50.5 FJ996 S FC475 S FC40 S /6-3..50.6.5 FJ996 66S FC475 66S FC40 6S 5 /6-6 3.46.57.78.50 *Complete fittings are one-piece assemblies. 30 08

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) S 37 (JIC) swivel FC5963/FJ9775 / elbow S 37 (JIC) swivel FC5965/FJ9776 30 elbow FC5967/FJ9778 60 elbow S 37 (JIC) swivel ll dimensions in inches. FC967/FJ9777 45 elbow FC5969/FJ9779 67 / elbow FC965/FJ9780 90 elbow Complete Component Part Numbers Fitting Part Number Nipple ssembly Socket Thread Size / elbow FC5963 0808S FC4963 0808S FC347 08S 3 /4-6 08 3.54.0.38.47.88.8 FJ9775 S FJ8775 S FC40 S /6-4.4.5.6.5.5 FJ9775 66S FJ8775 66S FC40 6S 5 /6-6 5.3 3.4.78.69.50 FJ9775 00S * * 5 /8-0 6.4 3.77.05.80.00 FJ9775 44S * * 7 /8-4 7.4 4.49.6.95.5 30 elbow FC5965 0808S FC4965 0808S FC347 08S 3 /4-6 08 3.49.4.38.6.88.8 FJ9776 S FJ8776 S FC40 S /6-4.8.45.6.69.5 FJ9776 66S FJ8776 66S FC40 6S 5 /6-6 5.0 3.30.78.95.50 FJ9776 00S * * 5 /8-0 6.55 3.90.05..00 FJ9776 44S 7 /8-4 7.48 4.56.6.9.5 45 elbow FC967 0808S FC867 0808S FC347 08S 3 /4-6 08 3.46..38.95.88.8 FC967 0S FC867 0S FC347 0S /6-0 4.07.60.50.6.5.00 FJ9777 S FJ8777 S FC40 S /6-4.39.67.6.6.5 FJ9777 66S FJ8777 66S FC40 6S 5 /6-6 5.34 3.44.78.53.50 FJ9777 00S * * 5 /8-0 6.5 3.86.05.70.00 FJ9777 44S * * 7 /8-4 7.47 4.55.6.99.5 60 elbow FC5967 0808S FC4967 0808S FC347 08S 3 /4-6 08 3.35.0.38.6.88.8 FJ9778 S FJ8778 S FC40 S /6-4.37.65.6.60.5 FJ9778 66S FJ8778 66S FC40 6S 5 /6-6 5.4 3.34.78.08.50 FJ9778 00S * * 5 /8-0 6.46 3.8.05.33.00 FJ9778 44S * * 7 /8-4 7.36 4.44.6.7.5 67 / elbow FC5969 0808S FC4969 0808S FC347 08S 3 /4-6 08 3.37.03.38.47.88.8 FJ9779 S FJ8779 S FC40 S /6-4.30.58.6.80.5 FJ9779 66S FJ8779 66S FC40 6S 5 /6-6 5.8 3.8.78.36.50 FJ9779 00S * * 5 /8-0 6.33 3.68.05.6.00 FJ9779 44S * * 7 /8-4 6.79 3.87.6.76.5 90 elbow FC965 0808S FC865 0808S FC347 08S 3 /4-6 08 3.04.69.38.87.88.8 FC965 0S FC865 0S FC347 0S /6-0 3.63.6.50.35.5.00 FJ9780 S FJ8780 S FC40 S /6-3.95.3.6.35.5 FJ9780 66S FJ8780 66S FC40 6S 5 /6-6 4.68.78.78 3.04.50 FJ9780 00S * * 5 /8-0 5.8 3.7.05 3.40.00 FJ9780 44S * * 7 /8-4 6.6 3.69.6 3.95.5 *Complete fittings are one-piece assemblies. 09

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) Straight split flange / elbow split flange FJ9569/FC975/FJ976 Code 6 FJ957/FC999/FJ9763 Code 6 FC9853/FJ976 Code 6 FC5957/FJ9764 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. Kφ Size φ Straight split flange Code 6 (S J58) FC975 0808S FC875 0808S FC347 08S.9 08 3.56..38.8 FC975 08S FC875 08S FC347 08S.50 08 3.56..38.8 FC975 0S FC875 0S FC347 0S.50 0 3.99.5.50.00 FJ976 S FJ876 S FC40 S.50 4.3.59.6 FJ976 6S FJ876 6S FC40 S.75 4.3.59.6 FJ976 66S FJ876 66S FC40 6S.75 6 5.03 3.4.78 FJ976 06S FJ876 06S FC40 6S.00 6 5.03 3.4.78 FJ976 00S * *.00 0 5.95 3.30.05 FJ976 40S * *.38 0 5.95 3.30.05 FJ976 44S * *.38 4 6.95 4.0.6 FJ976 34S * *.8 4 6.95 4.0.6 FJ9569 33S * *.8 3 8.8 4.8.69 Straight split flange Code 6 (S J58) FC9853 08S FC8853 08S FC347 08S.6 08 3.56..38.8 FJ976 S FJ876 S FC40 S.6 4.3.59.6 FJ976 6S FJ876 6S FC40 S.88 4.3.59.6 FJ976 66S FJ876 66S FC40 6S.88 6 5.03 3.4.78 FJ976 06S FJ876 06S FC40 6S. 6 5.03 3.4.78 FJ976 00S * *. 0 5.95 3.30.05 FJ976 40S * *.50 0 5.95 3.30.05 FJ976 44S * *.50 4 6.95 4.0.6 FJ976 34S * * 3. 4 6.7 4.0.6 / elbow split flange Code 6 (S J58) FC999 0808S FC899 0808S FC347 08S.9 08 3.3.97.38.3.8 FC999 08S FC899 08S FC347 08S.50 08 3.3.97.38.38.8 FJ9763 S FJ8763 S FC40 S.50 4.04.3.6.44 FJ9763 6S FJ8763 6S FC40 S.75 4.04.3.6.44 FJ9763 66S FJ8763 66S FC40 6S.75 6 4.5.6.78.44 FJ9763 06S FJ8763 06S FC40 6S.00 6 4.5.6.78.44 FJ9763 00S * *.00 0 5.7 3.06.05.50 FJ9763 40S * *.38 0 5.7 3.06.05.50 FJ9763 44S * *.38 4 6.65 3.73.6.63 FJ9763 34S * *.8 4 6.65 3.73.6.63 FJ957 33S * *.8 3 8.8 4.8.69.88 / elbow split flange Code 6 (S J58) FC5957 08S FC4957 08S FC347 08S.6 08 3.3.97.38.38.8 FJ9764 S FJ8764 S FC40 S.6 4.04.3.6.44 FJ9764 6S FJ8764 6S FC40 S.88 4.04.3.6.44 FJ9764 66S FJ8764 66S FC40 6S.88 6 4.5.6.78.44 FJ9764 06S FJ8764 06S FC40 6S. 6 4.5.6.78.44 FJ9764 00S * *. 0 5.7 3.06.05.50 FJ9764 40S * *.50 0 5.7 3.06.05.50 FJ9764 44S * *.50 4 6.65 3.73.6.63 FJ9764 34S * * 3. 4 6.65 3.73.6.63 *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. K K 0

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) 30 elbow split flange 45 elbow split flange FJ9573/FJ9765 Code 6 FJ9575/FC974/FJ9767 Code 6 FC9854/FJ9766 Code 6 FC9855/FJ9768 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 30 elbow split flange Code 6 (S J58) FJ9765 S FJ8765 S FC40 S.50 3.98.6.6.58 FJ9765 6S FJ8765 6S FC40 S.75 3.98.6.6.58 FJ9765 66S FJ8765 66S FC40 6S.75 6 4.6.7.78.6 FJ9765 06S FJ8765 06S FC40 6S.00 6 4.6.7.78.6 FJ9765 00S * *.00 0 5.88 3.3.05.7 FJ9765 40S * *.38 0 5.88 3.3.05.7 FJ9765 44S * *.38 4 6.77 3.85.6.88 FJ9765 34S * *.8 4 6.77 3.85.6.88 FJ9573 33S * *.8 3 8.4 5.06.69.5 30 elbow split flange Code 6 (S J58) FC9854 08S FC8854 08S FC347 08S.6 08 3.8.93.38.50.8 FJ9766 S FJ8766 S FC40 S.6 3.98.6.6.58 FJ9766 6S FJ8766 6S FC40 S.88 3.98.6.6.58 FJ9766 66S FJ8766 66S FC40 6S.88 6 4.6.7.78.6 FJ9766 06S FJ8766 06S FC40 6S. 6 4.6.7.78.6 FJ9766 00S * *. 0 5.88 3.3.05.7 FJ9766 40S * *.50 0 5.88 3.3.05.7 FJ9766 44S * *.50 4 6.77 3.85.6.88 FJ9766 34S * * 3. 4 6.77 3.85.6.88 45 elbow split flange Code 6 (S J58) FC974 0808S FC874 0808S FC347 08S.9 08 3.9.95.38.78.8 FC974 08S FC874 08S FC347 08S.50 08 3.9.95.38.78.8 FC974 0S FC874 0S FC347 0S.50 0 3.9.45.50.00.00 FJ9767 S FJ8767 S FC40 S.50 4.4.5.6.00 FJ9767 6S FJ8767 6S FC40 S.75 4.4.5.6.00 FJ9767 66S FJ8767 66S FC40 6S.75 6 4.87.97.78.06 FJ9767 06S FJ8767 06S FC40 6S.00 6 4.87.97.78.06 FJ9767 00S * *.00 0 5.97 3.3.05.5 FJ9767 40S * *.38 0 5.97 3.3.05.5 FJ9767 44S * *.38 4 6.88 3.96.6.4 FJ9767 34S * *.8 4 6.88 3.96.6.4 FJ9575 33S * *.8 3 8.58 5.3.69.00 45 elbow split flange Code 6 (S J58) FC9855 08S FC8855 08S FC347 08S.6 08 3.9.95.38.78.8 FJ9768 S FJ8768 S FC40 S.6 4.4.5.6.00 FJ9768 6S FJ8768 6S FC40 S.88 4.4.5.6.00 FJ9768 66S FJ8768 66S FC40 6S.88 6 4.87.97.78.06 FJ9768 06S FJ8768 06S FC40 6S. 6 4.87.97.78.06 FJ9768 00S * *. 0 5.97 3.3.05.5 FJ9768 40S * *.50 0 5.97 3.3.05.5 FJ9768 44S * *.50 4 6.88 3.96.6.4 FJ9768 34S * * 3. 4 6.88 3.96.6.4 *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. K K

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) ll dimensions in inches. Complete Component Part Numbers Flange Fitting Part Number Nipple ssy. Socket ead ia. K Size 60 elbow split flange Code 6 (SJ58) FC980 0808S FC880 0808S FC347 08S.9 08 3.3.88.38.05.8 FC980 08S FC880 08S FC347 08S.50 08 3.3.88.38.05.8 FJ9769 S FJ8769 S FC40 S.50 4.6.54.6.4 FJ9769 6S FJ8769 6S FC40 S.75 4.6.54.6.4 FJ9769 66S FJ8769 66S FC40 6S.75 6 4.90 3.0.78.50 FJ9769 06S FJ8769 06S FC40 6S.00 6 4.90 3.0.78.50 FJ9769 00S * *.00 0 6.07 3.4.05.66 FJ9769 40S * *.38 0 6.07 3.4.05.66 FJ9769 44S * *.38 4 6.94 4.0.6.00 FJ9769 34S * *.8 4 6.94 4.0.6.00 60 elbow split flange Code 6 (SJ58) FC7330 08S FC6330 08S FC347 08S.6 08 3.3.88.38.05.8 FJ9770 S FJ8770 S FC40 S.6 4.6.54.6.4 FJ9770 6S FJ8770 6S FC40 S.88 4.6.54.6.4 FJ9770 66S FJ8770 66S FC40 6S.88 6 4.90 3.0.78.50 FJ9770 06S FJ8770 06S FC40 6S. 6 4.90 3.0.78.50 FJ9770 00S * *. 0 6.07 3.4.05.66 FJ9770 40S * *.50 0 6.07 3.4.05.66 FJ9770 44S * *.50 4 6.94 4.0.6.00 FJ9770 34S * * 3. 4 6.94 4.0.6.00 67 / elbow split flange Code 6 (SJ58) FC976 0808S FC876 0808S FC347 08S.9 08 3.8.94.38.5.8 FC976 08S FC876 08S FC347 08S.50 08 3.8.94.38.3.8 FJ977 S FJ877 S FC40 S.50 4..49.6.60 FJ977 6S FJ877 6S FC40 S.75 4..49.6.60 FJ977 66S FJ877 66S FC40 6S.75 6 4.9 3.03.78.75 FJ977 06S FJ877 06S FC40 6S.00 6 4.9 3.03.78.75 FJ977 00S * *.00 0 6.04 3.39.05.90 FJ977 40S * *.38 0 6.04 3.39.05.90 FJ977 44S * *.38 4 6.48 3.56.6.00 FJ977 34S * *.8 4 6.48 3.56.6.00 FJ9579 33S * *.8 3 8.6 5.7.69 3.5 67 / elbow split flange Code 6 (SJ58) FC5960 08S FC4960 08S FC347 08S.6 08 3.8.94.38.5.8 FJ977 S FJ877 S FC40 S.6 4..49.6.60 FJ977 6S FJ877 6S FC40 S.88 4..49.6.60 FJ977 66S FJ877 66S FC40 6S.88 6 4.9 3.03.78.75 FJ977 06S FJ877 06S FC40 6S. 6 4.9 3.03.78.75 FJ977 00S * *. 0 6.04 3.39.05.90 FJ977 40S * *.50 0 6.04 3.39.05.90 FJ977 44S * *.50 4 6.48 3.56.6.00 FJ977 34S * * 3. 4 6.48 3.56.6.00 *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. K 60 elbow split flange FC980/FJ9769 Code 6 FC7330/FJ9770 Code 6 K 67 / elbow split flange FJ9579/FC976/FJ977 Code 6 FC5960/FJ977 Code 6

SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) K 90 elbow split flange FJ958/FC977/FJ9773 Code 6 FC9856/FJ9774 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 90 elbow split flange Code 6 (SJ58) FC977-0808S FC877-0808S FC347-08S.9-08 3.04.69.38.6.8 FC977-08S FC877-08S FC347-08S.50-08 3.04.69.38.6.8 FC977-0S FC877-0S FC347-0S.50-0 3.63.6.50.3.00 FJ9773-S FJ8773-S FC40-S.50-3.95.3.6.3 FJ9773-6S FJ8773-6S FC40-S.75-3.95.3.6.3 FJ9773-66S FJ8773-66S FC40-6S.75-6 4.68.78.78.38 FJ9773-06S FJ8773-06S FC40-6S.00-6 4.68.78.78.38 FJ9773-00S * *.00-0 5.8 3.7.05.6 FJ9773-40S * *.38-0 5.8 3.7.05.6 FJ9773-44S * *.38-4 6.6 3.69.6 3. FJ9773-34S * *.8-4 6.6 3.86.6 3. FJ958-33S * *.8-3 8.6 4.90.69 4.50 90 elbow split flange Code 6 (SJ58) FC9856-0808S FC8856-0808S FC347-08S.5-08 3.04.69.38.6.8 FC9856-08S FC8856-08S FC347-08S.6-08 3.04.69.38.6.8 FJ9774-S FJ8774-S FC40-S.6-3.95.3.6.3 FJ9774-6S FJ8774-6S FC40-S.88-3.95.3.6.3 FJ9774-66S FJ8774-66S FC40-6S.88-6 4.68.78.78.38 FJ9774-06S FJ8774-06S FC40-6S. -6 4.68.78.78.38 FJ9774-00S * *. -0 5.8 3.7.05.6 FJ9774-40S * *.50-0 5.8 3.7.05.6 FJ9774-44S * *.50-4 6.6 3.69.6 3. FJ9774-34S * * 3. -4 6.6 3.69.6 3. *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 3

SPIRL SINGL SKIV CRIMP for use with FC36, FC736, FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 8,, 6, 0, 4) C ORS Swivel Straight FJ9606/FJ9896 ll dimensions in inches. ORS Swivel 45 elbow FJ9609/FJ9897 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Straight FJ9606 0606S FJ8307 0606S FC347 06S /6-6 06.40.7.0.6.8.69 FJ9606 0808S FJ8307 0808S FC347 08S 3 /6-6 08.85.87.50.38.94.8 FJ9896 S FJ8896 S FC40 S 3 /6-3.57.07.85.6.38.06 FJ9896 6S FJ8896 6S FC40 S 7 /6-3.64.4.9.6.6.38 FJ9896 66S FJ8896 66S FC40 6S 7 /6-6 4.06.4.6.78.6.38 FJ9896 00S * * /6-0 4.94.3.30.05.88.6 FJ9896 44S * * - 4 5.4.00.3.6.5.00 45 elbow FJ9609 0808S FJ8609 0808S FC347 08S 3 /6-6 08 3.04.70.38.59.94.8 FJ9897 S FJ8897 S FC40 S 3 /6-4.06.33.6.83.38 FJ9897 66S FJ8897 66S FC40 6S 7 /6-6 4.87.98.78.94.6 FJ9897 00S * * /6-0 5.67 3.0.0.00.88 FJ9897 44S * * - 4 6.5 3.59.9.07.5 90 elbow (short) FJ96 0808S FJ86 0808S FC347 08S 3 /6-6 08.8.46.38.5.94.8 FJ9898 S FJ8898 S FC40 S 3 /6-3.95.3.6.88.38 FJ9898 6S FJ8898 6S FC40 S 7 /6-4.4.68.6..6 FJ9898 66S FJ8898 66S FC40 6S 7 /6-6 4.58.68.78..6 FJ9898 00S * * /6-0 5.75 3.0.0.5.88 FJ9898 44S * * - 4 6.6 3.69.9.70.5 90 elbow (long) FJ975 0808S FJ875 0808S FC347 08S 3 /6-6 08 3.04.69.38.5.94.8 FJ9899 S FJ8899 S FC40 S 3 /6-3.95.3.6 3.78.38 FJ9899 66S FJ8899 66S FC40 6S 7 /6-6 4.68.78.78 4.50.6 FJ9899 00S * * /6-0 5.8 3.6.0 5.09.88 FJ9899 44S * * - 4 6.6 3.68.9 5.54.5 NOT: see page 78 for O-Rings. ORS Swivel 90 elbow (short) FJ96/FJ9898 ORS Swivel 90 elbow (long) FJ975/FJ9899 for use with FC36, FC736, FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 8,, 6, 0, 4) 30 swivel Metric threads FJ788 06S FJ688 06S FC40 S M30x.5 3.84..6.44. FJ788 06S FJ688 06S FC40 6S M33x.5 6 4.4.34.78.6.5 FJ788 0S * * M36x.5 0 5.3.67.95.8.6 FJ788 44S * * M4x.5 4 5.8.89.9.5.8 *Complete fittings are one-piece assemblies. 30 30 swivel Metric threads Special Komatsu FJ788 4

SPIRL SINGL SKIV CRIMP for use with FC34 08 30 Male pipe FJ9759 S 37 (JIC) swivel FJ9760 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Male pipe FJ9759 0808S FC4 0808S FC40 08S 3 /4-6 08.66.6.36.8 S 37 (JIC) swivel FJ9760 0808S FJ8760 0808S FC40 08S 3 /4-6 08 3..58.38.88.8 5

SPIRL SINGL SKIV CRIMP for use with FC54, FC73 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Male pipe FJ978 08S * * /-4 3.9.6.6.06 FJ978 S * * 3 /4-4 3.98.67.6.06 FJ978 6S * * - / 4.4.93.6.38 FJ978 6S * * 3 /4-4 6 4.6.70.78.5 FJ978 66S * * - / 6 4.47.90.78.38 FJ978 06S * * /4- / 6 4.6.04.78.69 S 37 (JIC) swivel FJ978 S * * /6-4.7.86.6.5.06 FJ978 6S * * 5 /6-4.37.06.6.50.5 FJ978 66S * * 5 /6-6 4.65.09.78.50.5 FJ978 06S * * 5 /8-6 4.87.30.78.00.56 S 37 (JIC) male flare 30 Male pipe FJ978 FJ997 S * * /6-4.09.78.6. FJ997 6S * * 5 /6-4..90.6.38 FJ997 66S * * 5 /6-6 4.49.93.78.38 FJ997 06S * * 5 /8-6 4.60.03.78.69 S 37 (JIC) swivel FJ978 S 37 (JIC) male flare FJ997 *Complete fittings are one-piece assemblies. 6

SPIRL SINGL SKIV CRIMP FITTING for use with FC54, FC73 ll dimensions in inches. S 37 (JIC) swivel FJ9797 / elbow FJ9798 30 elbow FJ9799 45 elbow S 37 (JIC) swivel FJ980 90 elbow Complete Component Part Numbers / elbow Fitting Part Number Nipple ssy. Socket Thread Size Ø FJ9797 S * * /6-4.84.53.6.5.5 FJ9797 66S * * 5 /6-6 5.84 3.8.78.69.50 30 elbow FJ9798 S * * /6-4.78.47.6.69.5 FJ9798 66S * * 5 /6-6 5.9 3.34.78.95.50 45 elbow FJ9799 S * * /6-4.99.68.6.6.5 FJ9799 66S * * 5 /6-6 6.05 3.48.78.53.50 S 37 (JIC) swivel FJ9800 60 elbow FJ980 67 / elbow 60 elbow FJ9800 S * * /6-4.98.67.6.60.5 FJ9800 66S * * 5 /6-6 5.95 3.38.78.08.50 67 / elbow FJ980 S * * /6-4.90.59.6.80.5 FJ980 66S * * 5 /6-6 5.89 3.3.78.36.50 90 elbow FJ980 S * * /6-4.55.4.6.35.5 FJ980 66S * * 5 /6-6 5.39.8.78 3.04.50 *Complete fittings are one-piece assemblies. 7

SPIRL SINGL SKIV CRIMP FITTING for use with FC54, FC73 K ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. KØ Size Ø Straight split flange Code 6 (S J58) FJ9783 S * *.50 4.9.6.6 FJ9783 6S * *.75 4.9.6.6 FJ9783 66S * *.75 6 5.74 3.8.78 FJ9783 06S * *.00 6 5.74 3.8.78 Straight split flange Code 6 (S J58) FJ9784 S * *.6 4.9.6.6 FJ9784 6S * *.88 4.9.6.6 FJ9784 66S * *.88 6 5.74 3.8.78 FJ9784 06S * *. 6 5.74 3.8.78 Straight split flange FJ9783 Code 6 FJ9784 Code 6 K / elbow split flange FJ9785 Code 6 FJ9786 Code 6 / elbow split flange Code 6 (S J58) FJ9785 S * *.50 4.64.33.6.44 FJ9785 6S * *.75 4.64.33.6.44 FJ9785 66S * *.75 6 5.3.66.78.44 FJ9785 06S * *.00 6 5.3.66.78.44 / elbow split flange Code 6 (S J58) FJ9786 S * *.6 4.64.33.6.44 FJ9786 6S * *.88 4.64.33.6.44 FJ9786 66S * *.88 6 5.3.66.78.44 FJ9786 06S * *. 6 5.3.66.78.44 *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 8

SPIRL SINGL SKIV CRIMP for use with hose FC54, FC73 ll dimensions in inches. K 30 elbow split flange FJ9787 Code 6 FJ9788 Code 6 K 45 elbow split flange FJ9789 Code 6 FJ9790 Code 6 Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 30 elbow split flange Code 6 (S J58) FJ9787 S * *.50 4.58.8.6.58 FJ9787 6S * *.75 4.58.8.6.58 FJ9787 66S * *.75 6 5.33.76.78.6 FJ9787 06S * *.00 6 5.33.76.78.6 30 elbow split flange Code 6 (S J58) FJ9788 S * *.6 4.58.8.6.58 FJ9788 6S * *.88 4.58.8.6.58 FJ9788 66S * *.88 6 5.33.76.78.6 FJ9788 06S * *. 6 5.33.76.78.6 45 elbow split flange Code 6 (S J58) FJ9789 S * *.50 4.84.53.6.00 FJ9789 6S * *.75 4.84.53.6.00 FJ9789 66S * *.75 6 5.58 3.0.78.06 FJ9789 06S * *.00 6 5.58 3.0.78.06 45 elbow split flange Code 6 (S J58) FJ9790 S * *.6 4.84.53.6.00 FJ9790 6S * *.88 4.84.53.6.00 FJ9790 66S * *.88 6 5.58 3.0.78.06 FJ9790 06S * *. 6 5.58 3.0.78.06 *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 9

SPIRL SINGL SKIV CRIMP for use with FC54, FC73 K 60 elbow split flange FJ979 Code 6 FJ979 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 60 elbow split flange Code 6 (S J58) FJ979 S * *.50 4.87.56.6.4 FJ979 6S * *.75 4.87.56.6.4 FJ979 66S * *.75 6 5.6 3.05.78.50 FJ979 06S * *.00 6 5.6 3.05.78.50 60 elbow split flange Code 6 (S J58) FJ979 S * *.6 4.87.56.6.4 FJ979 6S * *.88 4.87.56.6.4 FJ979 66S * *.88 6 5.6 3.05.78.50 FJ979 06S * *. 6 5.6 3.05.78.50 K 67 / elbow split flange FJ9793 Code 6 FJ9794 Code 6 67 / elbow split flange Code 6 (S J58) FJ9793 S * *.50 4.8.5.6.60 FJ9793 6S * *.75 4.8.5.6.60 FJ9793 66S * *.75 6 5.63 3.07.78.75 FJ9793 06S * *.00 6 5.63 3.07.78.75 67 / elbow split flange Code 6 (S J58) FJ9794 S * *.6 4.8.5.6.60 FJ9794 6S * *.88 4.8.5.6.60 FJ9794 66S * *.88 6 5.63 3.07.78.75 FJ9794 06S * *. 6 5.63 3.07.78.75 *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 0

SPIRL SINGL SKIV CRIMP for use with FC54, FC73 ll dimensions in inches. K 90 elbow split flange FJ9795 Code 6 FJ9796 Code 6 Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. Kφ Size φ 90 elbow split flange Code 6 (S J58) FJ9795 S * *.50 4.55.4.6.3 FJ9795 6S * *.75 4.55.4.6.3 FJ9795 66S * *.75 6 5.39.8.78.38 FJ9795 06S * *.00 6 5.39.8.78.38 90 elbow split flange Code 6 (S J58) FJ9796 S * *.6 4.55.4.6.3 FJ9796 6S * *.88 4.55.4.6.3 FJ9796 66S * *.88 6 5.39.8.78.38 FJ9796 06S * *. 6 5.39.8.78.38 *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79

SPIRL SINGL SKIV CRIMP for use with FC54, FC73 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C φ Straight C FJ9900 S * * 3 /6-4.8.07.87.6.38. FJ9900 66S * * 7 /6-6 4.77.4.0.78.6.38 45 elbow ORS Swivel Straight FJ9900 ORS Swivel 45 elbow FJ990 FJ990 S * * 3 /6-4.66.35.6.83.38 FJ990 66S * * 7 /6-6 5.58 3.0.78.94.6 ORS Swivel 90 elbow (short) FJ990 ORS Swivel 90 elbow (long) FJ9903 90 elbow (short) FJ990 S * * 3 /6-4.35.4.6.88.38 FJ990 66S * * 7 /6-6 5.9.7.78..6 90 elbow (long) FJ9903 S * * 3 /6-4.55.4.6 3.78.38 FJ9903 66S * * 7 /6-6 5.39.8.78 4.50.6 *Complete fittings are one-piece assemblies. NOT: see page 78 for O-Rings.

INTRNL SKIV CRIMP * for use with FC36 ( 6 through 3),** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) 30 Male pipe S 37 (JIC) swivel S 37 (JIC) male flare FC558 FC504 FC506 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size Male pipe FC558 0608S FC70 0608S FC540 08S 3 /8-8 08 3.09.9.36.8 FC558 0808S FC70 0808S FC540 08S I /-4 08 3.34.54.36.88 FC558 S FC70 S FC77 S 3 /4-4 3.56.44.6.06 FC558 66S FC70 66S FC540 6S - / 6 4.39.77.78.38 FC558 06S FC70 06S FC540 6S /4- / 6 4.48.86.78.69 FC558 00S FC70 00S FC540 0S /4- / 0 4.5.87.05.69 FC558 40S FC70 40S FC540 0S /- / 0 4.6.96.05.00 FC558 44S FC70 44S FC540 4S /- / 4 5.05.0.6.00 FC558 34S FC70 34S FC540 4S - / 4 5.5..6.50 FC558 33S FC70 33S FC540 3S - / 3 5.5.33.69.6 S 37 (JIC) swivel FC504 0808S FC404 0808S FC540 08S 3 /4-6 08 3.39.59.36.94.8 FC504 S FC404 S FC77 S /6-3.8.70.6.5.06 FC504 66S FC404 66S FC540 6S 5 /6-6 4.5.9.78.50.5 FC504 00S FC404 00S FC540 0S 5 /8-0 4.77..05.00.56 FC504 40S FC404 40S FC540 0S 7 /8-0 4.98.33.05.5.8 FC504 44S FC404 44S FC540 4S 7 /8-4 5.43.40.6.5.8 FC504 33S FC404 33S FC540 3S /- 3 5.50.3.69.88 S 37 (JIC) male flare FC506 S FC697 S FC77 S /6-3.73.6.6. FC506 66S FC697 66S FC540 6S 5 /6-6 4.36.75.78.38 FC506 00S FC697 00S FC540 0S 5 /8-0 4.44.80.05.6 FC506 44S FC697 44S FC540 4S 7 /8-4 5.07.04.6.88 S 37 (JIC) FJ909 / elbow FC557 30 elbow / elbow FJ909 S FJ809 S FC77 S /6-4.49.37.6.5.5 FJ909 66S FJ809 66S FC540 6S 5 /6-6 5.7 3.0.78.69.50 FJ909 00S FJ809 00S FC540 0S 5 /8-0 6.5 3.50.05.80.00 FJ909 44S FJ809 44S FC540 4S 7 /8-4 7.9 4.6.6.95.5 30 elbow FC557 S FC457 S FC77 S /6-4.4.3.6.69.5 FC557 66S FC457 66S FC540 6S 5 /6-6 5.78 3.6.78.95.50 FC557 00S FC457 00S FC540 0S 5 /8-0 6.8 3.63.05..00 FC557 44S FC457 44S FC540 4S 7 /8-4 7.36 4.34.6.9.5 45 elbow FC556 S FC456 S FC77 S /6-4.64.5.6.6.5 FC556 66S FC456 66S FC540 6S 5 /6-6 5.9 3.30.78.53.50 FC556 00S FC456 00S FC540 0S 5 /8-0 6.4 3.60.05.70.00 FC556 44S FC456 44S FC540 4S 7 /8-4 7.35 4.3.6.99.5 60 elbow FJ9030 S FJ8030 S FC77 S /l6-4.6.5.6.60.5 FJ9030 66S FJ8030 66S FC540 6S 5 /6-6 5.8 3.0.78.08.50 FJ9030 00S FJ8030 00S FC540 0S 5 /8-0 6.8 3.54.05.33.00 FJ9030 44S FJ8030 44S FC540 4S 7 /8-4 7.4 4..6.7.5 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S, and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. S 37 (JIC) 45 elbow FC556 S 37 (JIC) 60 elbow FJ9030 3

INTRNL SKIV CRIMP * for use with FC36 ( 6 thru 3),** FC54, FC33, FC34 (, 6 only), FC736 ( 6, 0 only) S 37 (JIC) FJ903 67 / elbow ll dimensions in inches. Complete Component Part Numbers Thread Fitting Flange ead Part Number Nipple ssy. Socket ia. K Size 67 / elbow FJ903 S FJ803 S FC77 S /6-4.55.43.6.80.5 FJ903 66S FJ803 66S FC540 6S 5 /6-6 5.76 3.4.78.36.50 FJ903 00S FJ803 00S FC540 0S 5 /8-0 6.06 3.4.05.6.00 FJ903 44S FJ803 44S FC540 4S 7 /8-4 6.67 3.64.6.76.5 90 elbow FC5564 S FC4564 S FC77 S /6-4.0.08.6.35.5 FC5564 66S FC4564 66S FC540 6S 5 /6-6 5.6.64.78 3.04.50 FC5564 00S FC4564 00S FC540 0S 5 /8-0 5.54.90.05 3.40.00 FC5564 44S FC4564 44S FC540 4S 7 /8-4 6.48 3.46.6 3.95.5 Straight split flange Code 6 (S J58) FC5050 S FC4050 S FC77 S.50 4.56.44.6 FC5050 66S FC4050 66S FC540 6S.75 6 5.6 3.00.78 FC5050 06S FC4050 06S FC540 6S.00 6 5.6 3.00.78 FC5050 46S FC4050 46S FC540 6S.38 6 5.6 3.00.78 FC5050 00S FC4050 00S FC540 0S.00 0 5.68 3.03.05 FC5050 40S FC4050 40S FC540 0S.38 0 5.68 3.03.05 FC5050 30S FC4050 30S FC540 0S.8 0 5.68 3.03.05 FC5050 44S FC4050 44S FC540 4S.38 4 6.83 3.80.6 FC5050 34S FC4050 34S FC540 4S.8 4 6.83 3.80.6 FC5050 33S FC4050 33S FC540 3S.8 3 7.98 4.80.69 Straight split flange Code 6 (S J58) FC5049 S FC4049 S FC77 S.6 4.56.44.6 FC5049 66S FC4049 66S FC540 6S.88 6 5.6 3.00.78 FC5049 06S FC4049 06S FC540 6S. 6 5.6 3.00.78 FC5049 46S FC4049 46S FC540 6S.50 6 5.6 3.00.78 FC5049 00S FC4049 00S FC540 0S. 0 5.68 3.03.05 FC5049 40S FC4049 40S FC540 0S.50 0 5.68 3.03.05 FC5049 30S FC4049 30S FC540 0S 3. 0 5.68 3.03.05 FC5049 44S FC4049 44S FC540 4S.50 4 6.8 3.80.6 FC5049 34S FC4049 34S FC540 4S 3. 4 6.8 3.80.6 FC5049 33S FC4049 33S FC540 3S 3. 3 7.98 4.80.69 K / elbow split flange Code 6 (S J58) FC5507 66S FC4507 66S FC540 6S.75 6 5.0.48.78.44 FC5507 06S FC4507 06S FC540 6S.00 6 5.0.48.78.44 FC5507 00S FC4507 00S FC540 0S.00 0 5.44.79.05.50 FC5507 40S FC4507 40S FC540 0S.38 0 5.4.78.05.50 FC5507 44S FC4507 44S FC540 4S.38 4 6.53 3.50.6.63 FC5507 34S FC4507 34S FC540 4S.8 4 6.53 3.50.6.63 FC5507 33S FC4507 33S FC540 3S.8 3 7.98 4.80.69.88 NOT: For flanges, split flange halves, kits and O Rings, see pages 76-79. *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. S 37 (JIC) 90 elbow FC5564 K / elbow split flange FC5507 Code 6 Straight Split Flange FC5050 Code 6 FC5049 Code 6 4

INTRNL SKIV CRIMP * for use with FC36 ( 6 through -3), ** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) K 30 elbow split flange 45 elbow split flange / elbow split flange FC56 Code 6 FC505 Code 6 FC5374 Code 6 FC5387 Code 6 FC505 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size / elbow split flange Code 6 (S J58) FC5374 S FC4374 S FC77 S.6 4.8.7.6.44 FC5374 66S FC4374 66S FC540 6S.88 6 5.0.48.78.44 FC5374 06S FC4374 06S FC540 6S. 6 5.0.48.78.44 FC5374 00S FC4374 00S FC540 0S. 0 5.44.79.05.50 FC5374 40S FC4374 40S FC540 0S.50 0 5.44.79.05.50 FC5374 44S FC4374 44S FC540 4S.50 4 6.53 3.50.6.63 FC5374 34S FC4374 34S FC540 4S 3. 4 6.53 3.50.6.63 FC5374 33S FC4374 33S FC540 3S 3. 3 7.98 4.80.69.88 30 elbow split flange Code 6 (S J58) FC56 S FC46 S FC77 S.50 4.3..6.58 FC56 66S FC46 66S FC540 6S.75 6 5.0.58.78.6 FC56 06S FC46 06S FC540 6S.00 6 5.0.58.78.6 FC56 00S FC46 00S FC540 0S.00 0 5.6.96.05.7 FC56 40S FC46 40S FC540 0S.38 0 5.6.96.05.7 FC56 44S FC46 44S FC540 4S.38 4 6.64 3.6.6.88 FC56 34S FC46 34S FC540 4S.8 4 6.64 3.6.6.88 FC56 33S FC46 33S FC540 3S.8 3 8. 5.04.69.5 30 elbow split flange Code 6 (S J58) FC5387 S FC4387 S FC77 S.6 4.3..6.58 FC5387 66S FC4387 66S FC540 6S.88 6 5.0.58.78.6 FC5387 06S FC4387 06S FC540 6S. 6 5.0.58.78.6 FC5387 00S FC4387 00S FC540 0S. 0 5.6.96.05.7 FC5387 40S FC4387 40S FC540 0S.50 0 5.6.96.05.7 FC5387 44S FC4387 44S FC540 4S.50 4 6.64 3.6.6.88 FC5387 34S FC4387 34S FC540 4S 3. 4 6.64 3.6.6.88 FC5387 33S FC4387 33S FC540 3S 3. 3 8. 5.04.69.5 45 elbow split flange Code 6 (S J58) FC505 S FC405 S FC77 S.50 4.48.37.6.00 FC505 66S FC405 66S FC540 6S.75 6 5.44.83.78.06 FC505 06S FC405 06S FC540 6S.00 6 5.44.83.78.06 FC505 00S FC405 00S FC540 0S.00 0 5.70 3.05.05.5 FC505 40S FC405 40S FC540 0S.38 0 5.70 3.05.05.5 FC505 44S FC405 44S FC540 4S.38 4 6.76 3.74.6.4 FC505 34S FC405 34S FC540 4S.8 4 6.76 3.74.6.4 FC505 33S FC405 33S FC540 3S.8 3 8.39 5.0.69.00 45 elbow split flange Code 6 (S J58) FC505 S FC405 S FC77 S.6 4.48.37.6.00 FC505 66S FC405 66S FC540 6S.88 6 5.44.83.78.06 FC505 06S FC405 06S FC540 6S. 6 5.44.83.78.06 FC505 00S FC405 00S FC540 0S. 0 5.70 3.05.05.5 FC505 40S FC405 40S FC540 0S.50 0 5.70 3.05.05.5 FC505 44S FC405 44S FC540 4S.50 4 6.76 3.74.6.4 FC505 34S FC405 34S FC540 4S 3. 4 6.76 3.74.6.4 FC505 33S FC405 33S FC540 3S 3. 3 8.39 5.0.69.00 NOT: For flanges, split flange halves, kits and O Rings, see pages 76-79. *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. K K 5

INTRNL SKIV CRIMP * for use with FC36 ( 6 through 3),** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) ll dimensions in inches. Complete K Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 60 elbow split flange Code 6 (S J58) FC5504 66S FC4504 66S FC540 6S.75 6 5.9.87.76.50 FC5504 06S FC4504 06S FC540 6S.00 6 5.9.87.76.50 FC5504 00S FC4504 00S FC540 0S.00 0 5.6 3.5.94.66 FC5504 40S FC4504 40S FC540 0S.38 0 5.6 3.5.94.66 FC5504 44S FC4504 44S FC540 4S.38 4 6.64 3.80..00 FC5504 34S FC4504 34S FC540 4S.8 4 6.64 3.80..00 FC5504 33S FC4504 33S FC540 3S.8 3 8.39 5.36.6.88 60 elbow split flange Code 6 (S J58) FC558 66S FC458 66S FC540 6S.88 6 5.9.87.76.50 FC558 06S FC458 06S FC540 6S. 6 5.9.87.76.50 FC558 00S FC458 00S FC540 0S. 0 5.6 3.5.94.66 FC558 40S FC458 40S FC540 0S.50 0 5.6 3.5.94.66 FC558 44S FC458 44S FC540 4S.50 4 6.64 3.80..00 FC558 34S FC458 34S FC540 4S 3. 4 6.64 3.80..00 FC558 33S FC458 33S FC540 3S 3. 3 8.39 5.36.6.88 67 / elbow split flange Code 6 (S J58) FC553 S FC453 S FC77 S.50 4.7.35.56.60 FC553 66S FC453 66S FC540 6S.75 6 5.3.89.76.75 FC553 06S FC453 06S FC540 6S.00 6 5.3.89.76.75 FC553 00S FC453 00S FC540 0S.00 0 5.58 3..94.90 FC553 40S FC453 40S FC540 0S.38 0 5.58 3..94.90 FC553 44S FC453 44S FC540 4S.38 4 6.7 3.33..00 FC553 34S FC453 34S FC540 4S.8 4 6.7 3.33..00 FC553 33S FC453 33S FC540 3S.8 3 8.7 5.4.6 3.5 67 / elbow split flange Code 6 (S J58) FC5373 S FC4373 S FC77 S.6 4.7.35.56.60 FC5373 66S FC4373 66S FC540 6S.88 6 5.3.89.76.75 FC5373 06S FC4373 06S FC540 6S. 6 5.3.89.76.75 FC5373 00S FC4373 00S FC540 0S. 0 5.58 3..94.90 FC5373 40S FC4373 40S FC540 0S.50 0 5.58 3..94.90 FC5373 44S FC4373 44S FC540 4S.50 4 6.7 3.33..00 FC5373 34S FC4373 34S FC540 4S 3. 4 6.7 3.33..00 FC5373 33S FC4373 33S FC540 3S 3. 3 8.7 5.4.6 3.5 90 elbow split flange Code 6 (S J58) FC5054 S FC4054 S FC77 S.50 4.0.08.56.3 FC5054 66S FC4054 66S FC540 6S.75 6 5.07.65.76.38 FC5054 06S FC4054 06S FC540 6S.00 6 5.07.65.76.38 FC5054 00S FC4054 00S FC540 0S.00 0 5.36.90.94.63 FC5054 40S FC4054 40S FC540 0S.38 0 5.36.90.94.63 FC5054 44S FC4054 44S FC540 4S.38 4 6.30 3.46. 3.3 FC5054 34S FC4054 34S FC540 4S.8 4 6.30 3.46. 3.3 FC5054 33S FC4054 33S FC540 3S.8 3 7.9 4.88.6 4.50 60 elbow split flange FC5504 Code 6 FC558 Code 6 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 08S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. K 67 / elbow split flange FC553 Code 6 FC5373 Code 6 K 90 elbow split flange FC5054 Code 6 6

INTRNL SKIV CRIMP * for use with FC36 ( 6 TRU -3), ** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. KØ Size Ø 90 elbow split flange Code 6 (S J58) FC5053 S FC4053 S FC77 S.6 4.0.08.56.3 FC5053 66S FC4053 66S FC540 6S.88 6 5.07.65.76.38 FC5053 06S FC4053 06S FC540 6S. 6 5.07.65.76.38 FC5053 00S FC4053 00S FC540 0S. 0 5.36.90.94.63 FC5053 40S FC4053 40S FC540 0S.50 0 5.36.90.94.63 FC5053 44S FC4053 44S FC540 4S.50 4 6.30 3.46. 3.3 FC5053 34S FC4053 34S FC540 4S 3. 4 6.30 3.46. 3.3 FC5053 33S FC4053 33S FC540 3S 3. 3 7.9 4.88.6 4.50 K 90 elbow split flange FC5053 Code 6 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 08S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 7

INTRNL SKIV CRIMP * for use with hose FC36 ( 6 thru 3)**, FC54, FC33, FC34 (, 6 only), FC73 (, 6), FC736 ( 6, 0 only) C Complete Component Part Numbers Straight Fitting Part Number Nipple ssy. Socket Thread Size C Ø FJ9608 S FJ8608 S FC77 S 3 /6-3.8.07.70.6.38. FJ9608 66S FJ8608 66S FC540 6S 7 /6-6 4.64.4.03.78.6.38 FJ9608 00S FJ8608 00S FC540 0S /6-0 4.68.3.03.05.88.6 FJ9608 44S FJ8608 44S FC540 4S - 4 5..00.09.6.5.00 45 elbow ORS Swivel Straight FJ9608 ll dimensions in inches. FJ96 S FJ86 S FC77 S 3 /6-4.30.9.56.83.38 FJ96 66S FJ86 66S FC540 6S 7 /6-6 5.45.84.76.90.6 FJ96 00S FJ86 00S FC540 0S /6-0 5.40.75.0.00.88 FJ96 44S FJ86 44S FC540 4S - 4 6.39 3.36.9.07.5 90 elbow (short) FJ964 S FJ864 S FC77 S 3 /6-4.0.08.56.88.38 FJ964 66S FJ864 66S FC540 6S 7 /6-6 5.6.54.76..6 FJ964 00S FJ864 00S FC540 0S /6-0 5.48.84.0.5.88 FJ964 44S FJ864 44S FC540 4S - 4 6.48 3.46.9.70.5 90 elbow (long) ORS Swivel 45 elbow FJ96 ORS Swivel 90 elbow (short) FJ964 FJ977 S FJ877 S FC77 S 3 /6-4.0.08.56 3.78.38 FJ977 66S FJ877 66S FC540 6S 7 /6-6 5.6.54.76 4.50.6 FJ977 00S FJ877 00S FC540 0S /6-0 5.54.90.0 5.09.88 FJ977 44S FJ877 44S FC540 4S - 4 6.48 3.46.9 5.54.5 ORS Swivel 90 elbow (long) FJ977 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 08S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 8

INTRNL SKIV CRIMP * for use with hose FC73, FC35 ll dimensions in inches. Complete Component Part Numbers Male pipe Fitting Part Number Nipple ssy. Socket Thread Size FC53 S FC70 S FC77 S 3 /4-4 3.56.44.6.06 FC53 66S FC70 66S FC540 6S - / 6 4.39.77.78.38 FC53 00S FC70 00S FC77 0S /4- / 0 4.5.87.05.69 FC53 44S FC70 44S FC77 4S /- / 4 5.07.0.6.00 FC53 33S FC70 33S FC77 3S - / 3 5.36.33.69.6 S 37 (JIC) swivel 30 Male pipe FC53 FC53 S FC404 S FC77 S /6-3.8.70.6.5.06 FC53 66S FC404 66S FC540 6S 5 /6-6 4.5.9.78.50.5 FC53 00S FC404 00S FC77 0S 5 /8-0 4.77..05.00.56 FC53 40S FC404 40S FC77 0S 7 /8-0 4.98.33.05.5.8 FC53 44S FC404 44S FC77 4S 7 /8-4 5.45.40.6.5.8 FC53 33S FC404 33S FC77 3S /- 3 5.34.3.69.88 S 37 (JIC) swivel FC53 S 37 (JIC) male flare FC533 S 37 (JIC) male flare FC533 S FC697 S FC77 S /6-3.73.6.6. FC533 66S FC697 66S FC540 6S 5 /6-6 4.36.75.78.38 FC533 00S FC697 00S FC77 0S 5 /8-0 4.44.80.05.6 FC533 44S FC697 44S FC77 4S 7 /8-4 5.09.04.6.88 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608s, FC558 0808s and FC504 0808s fittings can be crimped on FT44 machines by using special equipment and procedures. 9

INTRNL SKIV CRIMP * for use with hose FC73, FC35 ll dimensions in inches. Complete Component Part Numbers / elbow Fitting Part Number Nipple ssy. Socket Thread Size Ø FJ9035 S FJ809 S FC77 S /6-4.49.37.6.5.5 FJ9035 66S FJ809 66S FC540 6S 5 /6-6 5.7 3.0.78.69.50 FJ9035 00S FJ809 00S FC77 0S 5 /8-0 6.5 3.50.05.80.00 FJ9035 44S FJ809 44S FC77 4S 7 /8-4 7.3 4.6.6.95.5 30 elbow FJ9036 S FC457 S FC77 S /6-4.5.3.6.69.5 FJ9036 66S FC457 66S FC540 6S 5 /6-6 5.78 3.6.78.95.50 FJ9036 00S FC457 00S FC77 0S 5 /8-0 6.8 3.63.05..00 FJ9036 44S FC457 44S FC77 4S 7 /8-4 7.38 4.34.6.9.5 45 elbow S 37 (JIC) / elbow FJ9035 FC5560 S FC456 S FC77 S /6-4.64.5.6.6.5 FC5560 66S FC456 66S FC540 6S 5 /6-6 5.9 3.30.78.53.50 FC5560 00S FC456 00S FC77 0S 5 /8-0 6.4 3.60.05.70.00 FC5560 44S FC456 44S FC77 4S 7 /8-4 7.37 4.3.6.99.5 S 37 (JIC) 30 elbow FJ9036 S 37 (JIC) 45 elbow FC5560 60 elbow FJ9037 S FJ8030 S FC77 S /6-4.6.5.6.60.5 FJ9037 66S FJ8030 66S FC540 6S 5 /6-6 5.8 3.0.78.08.50 FJ9037 00S FJ8030 00S FC77 0S 5 /8-0 6.8 3.54.05.33.00 FJ9037 44S FJ8030 44S FC77 4S 7 /8-4 7.6 4..6.7.5 67 / elbow FJ9038 S FJ803 S FC77 S /6-4.55.43.6.80.5 FJ9038 66S FJ803 66S FC540 6S 5 /6-6 5.76 3.4.78.36.50 FJ9038 00S FJ803 00S FC77 0S 5 /8-0 6.06 3.4.05.6.00 FJ9038 44S FJ803 44S FC77 4S 7 /8-4 6.69 3.64.6.76.5 90 elbow S 37 (JIC) 60 elbow FJ9037 S 37 (JIC) 67 / elbow FJ9038 FC5503 S FC4564 S FC77 S /6-4.0.08.6.35.5 FC5503 66S FC4564 66S FC540 6S 5 /6-6 5.6.64.78 3.04.50 FC5503 00S FC4564 00S FC77 0S 5 /8-0 5.54.90.05 3.40.00 FC5503 44S FC4564 44S FC77 4S 7 /8-4 6.5 3.46.6 3.95.5 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608s, FC558 0808s and FC504 0808s fittings can be crimped on FT44 machines by using special equipment and procedures. S 37 (JIC) 90 elbow FC5503 30

INTRNL SKIV CRIMP * for use with FC73, FC35 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size Straight split flange Code 6 (S J58) FC535 S FC4049 S FC77 S.6 4.56.44.6 FC535 6S FC4049 6S FC77 S.88 4.56.44.6 FC535 66S FC4049 66S FC540 6S.88 6 5.6 3.00.78 FC535 06S FC4049 06S FC540 6S. 6 5.6 3.00.78 FC535 00S FC4049 00S FC77 0S. 0 5.68 3.03.05 FC535 40S FC4049 40S FC77 0S.50 0 5.68 3.03.05 FC535 44S FC4049 44S FC77 4S.50 4 6.85 3.80.6 FC535 34S FC4049 34S FC77 4S 3. 4 6.85 3.80.6 FC535 33S FC4049 33S FC77 3S 3. 3 7.8 4.80.69 / elbow split flange Code 6 (S J58) K Straight split flange FC535 Code 6 FC537 S FC4374 S FC77 S.6 4.8.7.6.44 FC537 6S FC4374 6S FC77 S.88 4.8.7.6.44 FC537 66S FC4374 66S FC540 6S.88 6 5.0.48.78.44 FC537 06S FC4374 06S FC540 6S. 6 5.0.48.78.44 FC537 00S FC4374 00S FC77 0S. 0 5.44.79.05.50 FC537 40S FC4374 40S FC77 0S.50 0 5.44.79.05.50 FC537 44S FC4374 44S FC77 4S.50 4 6.55 3.50.6.63 FC537 34S FC4374 34S FC77 4S 3. 4 6.55 3.50.6.63 FC537 33S FC4374 33S FC77 3S 3. 3 7.8 4.80.69.88 K / elbow split flange FC537 Code 6 K 30 elbow split flange FC5370 Code 6 30 elbow split flange Code 6 (S J58) FC5370 S FC4387 S FC77 S.6 4.3..6.58 FC5370 6S FC4387 6S FC77 S.88 4.3..6.58 FC5370 66S FC4387 66S FC540 6S.88 6 5.0.58.78.6 FC5370 06S FC4387 06S FC540 6S. 6 5.0.58.78.6 FC5370 00S FC4387 00S FC77 0S. 0 5.6.96.05.7 FC5370 40S FC4387 40S FC77 0S.50 0 5.6.96.05.7 FC5370 44S FC4387 44S FC77 4S.50 4 6.67 3.6.6.88 FC5370 34S FC4387 34S FC77 4S 3. 4 6.67 3.6.6.88 FC5370 33S FC4387 33S FC77 3S 3. 3 8.06 5.04.69.5 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 3

INTRNL SKIV CRIMP * for use with hose FC73, FC35 K 45 elbow split flange Code 6 FC537 K 60 elbow split flange Code 6 FJ903 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 45 elbow split flange Code 6 (S J58) FC537 S FC405 S FC77 S.6 4.48.37.6.00 FC537 6S FC405 6S FC77 S.88 4.48.37.6.00 FC537 66S FC405 66S FC540 6S.88 6 5.44.83.78.06 FC537 06S FC405 06S FC540 6S. 6 5.44.83.78.06 FC537 00S FC405 00S FC77 0S. 0 5.70 3.05.05.5 FC537 40S FC405 40S FC77 0S.50 0 5.70 3.05.05.5 FC537 44S FC405 44S FC77 4S.50 4 6.79 3.74.6.40 FC537 34S FC405 34S FC77 4S 3. 4 6.70 3.65.6.4 FC537 33S FC405 33S FC77 3S 3. 3 8.3 5.0.69.00 60 elbow split flange Code 6 (S J58) FJ903 S FC458 S FC77 S.6 4.5.40.6.4 FJ903 6S FC458 6S FC77 S.88 4.5.40.6.4 FJ903 66S FC458 66S FC540 6S.88 6 5.48.87.78.50 FJ903 06S FC458 06S FC540 6S. 6 5.48.87.78.50 FJ903 00S FC458 00S FC77 0S. 0 5.80 3.5.05.66 FJ903 40S FC458 40S FC77 0S.50 0 5.80 3.5.05.66 FJ903 44S FC458 44S FC77 4S.50 4 6.85 3.80.6.00 FJ903 34S FC458 34S FC77 4S 3. 4 6.85 3.80.6.00 FJ903 33S FC458 33S FC77 3S 3. 3 8.38 5.36.69.88 67 / elbow split flange Code 6 (S J58) FC537 S FC4373 S FC77 S.6 4.46.35.6.60 FC537 6S FC4373 6S FC77 S.88 4.46.35.6.60 FC537 66S FC4373 66S FC540 6S.88 6 5.50.89.78.75 FC537 06S FC4373 06S FC540 6S. 6 5.50.89.78.75 FC537 00S FC4373 00S FC77 0S. 0 5.76 3..05.90 FC537 40S FC4373 40S FC77 0S.50 0 5.76 3..05.90 FC537 44S FC4373 44S FC77 4S.50 4 6.38 3.33.6.00 FC537 34S FC4373 34S FC77 4S 3. 4 6.38 3.33.6.00 FC537 33S FC4373 33S FC77 3S 3. 3 8.7 5.4.69 3.5 90 elbow split flange Code 6 (S J58) FC539 S FC4053 S FC77 S.6 4.0.08.6.3 FC539 6S FC4053 6S FC77 S.88 4.0.08.6.3 FC539 66S FC4053 66S FC540 6S.88 6 5.6.64.78.38 FC539 06S FC4053 06S FC540 6S. 6 5.6.64.78.38 FC539 00S FC4053 00S FC77 0S. 0 5.54.90.05.6 FC539 40S FC4053 40S FC77 0S.50 0 5.54.90.05.6 FC539 44S FC4053 44S FC77 4S.50 4 6.5 3.46.6 3. FC539 34S FC4053 34S FC77 4S 3. 4 6.5 3.46.6 3. FC539 33S FC4053 33S FC77 3S 3. 3 7.90 4.88.69 4.50 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. K 67 / elbow split flange Code 6 FC537 K 90 elbow split flange Code 6 FC539 3

INTRNL SKIV CRIMP * for use with hose FC73, FC35 ORS Swivel Straight FJ978 ll dimensions in inches. Complete Fitting Component Part Numbers Part Number Nipple ssy. Socket Thread Size C Straight C FJ978 S FJ8608 S FC77 S 3 /6-3.8.07.70.6.38. FJ978 66S FJ8608 66S FC540 6S 7 /6-6 4.64.4.03.78.6.38 FJ978 00S FJ8608 00S FC77 0S /6-0 4.68.3.03.05.88.6 FJ978 44S FJ8608 44S FC77 4S - 4 5.4.00.09.6.5.00 45 elbow ORS Swivel 45 elbow FJ979 FJ979 S FJ86 S FC77 S 3 /6-4.30.9.56.83.38 FJ979 66S FJ86 66S FC540 6S 7 /6-6 5.45.84.76.90.6 FJ979 00S FJ86 00S FC77 0S /6-0 5.40.75.0.00.88 FJ979 44S FJ86 44S FC77 4S - 4 6.4 3.36.9.07.5 ORS Swivel 90 elbow (short) FJ970 ORS Swivel 90 elbow (long) FJ97 90 elbow (short) FJ970 S FJ864 S FC77 S 3 /6-4.0.08.56.88.38 FJ970 66S FJ864 66S FC540 6S 7 /6-6 5.6.54.76..6 FJ970 00S FJ864 00S FC77 0S /6-0 5.48.84.0.5.88 FJ970 44S FJ864 44S FC77 4S - 4 6.5 3.46.9.70.5 90 elbow (long) FJ97 S FJ877 S FC77 S 3 /6-4.0.08.56 3.78.38 FJ97 66S FJ877 66S FC540 6S 7 /6-6 5.6.64.76 4.50.6 FJ97 00S FJ877 00S FC77 0S /6-0 5.54.90.0 5.09.88 FJ97 44S FJ877 44S FC77 4S - 4 6.5 3.46.9 5.54.5 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608S, FC558 0808S and FC504 0808S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: see page 78 for O-Rings. 33

INTRNL SKIV CRIMP * for use with hose FC606 Straight split flange FJ76 Code 6 ll dimensions in inches. K Complete Component Part Numbers Flange ead Fitting ia. K Part Number Nipple ssy. Socket Thread Size C Straight split flange Code 6 (S J58) FJ76 66S FJ66 66S FC60 6S.88 6 5.66 3.0.76 FJ76 60S FJ66 60S FC60 0S.88 0 6.5 3.06.76 FJ76 00S FJ66 00S FC60 0S. 0 6.8 3.0.94 45 elbow split flange Code 6 (S J58) 45 elbow split flange FJ774 Code 6 K 90 elbow split flange FJ777 Code 6 FJ774 66S FJ674 66S FC60 6S.88 6 5.50.86.76.06 FJ774 00S FJ674 00S FC60 0S. 0 6.0 3..94.5 C ORS straight FJ760 90 elbow split flange Code 6 (S J58) FJ777 66S FJ677 66S FC60 6S.88 6 5.3.67.76.38 FJ777 00S FJ677 00S FC60 0S. 0 6.05.96.94.6 ORS straight FJ760 66S FJ660 66S FC60 6S 7 /6-6 4.33.4.69.78.6.38 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC558 0608s, FC558 0808s and FC504 0808s fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 34

POLYON SWG for use with FC37, FC373, FC374, FC375, FC690 ll dimensions in inches. Male Pipe FC5805 NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. 30 Complete Male Pipe Fitting Part Number ie Part No. Pusher Part No. Thread Size Ø FC5805 00S FT43 00 FT43 50 /8-7 0.48.9.07.56 FC5805 003S FT43 00 3 FT43 50 /8-7 03.87.08.0.56 FC5805 0403S FT43 00 3 FT43 50 4 /4-8 03.06.6.0.69 FC5805 0603S FT43 00 3 FT43 50 5 3 /8-8 03.6.36.0.75 FC5805 004S FT43 00 4 FT43 50 /8-7 04.98.08.5.6 FC5805 0404S FT43 00 4 FT43 50 4 /4-8 04.6.6.5.69 FC5805 0604S FT43 00 4 FT43 50 5 3 /8-8 04.6.36.5.75 FC5805 0405S FT43 00 5 FT43 50 4 /4-8 05.34.06..69 FC5805 0605S FT43 00 5 FT43 50 5 3 /8-8 05.34.06..75 FC5805 0406S FT43 00 6 FT43 50 5 /4-8 06.5.06.8.75 FC5805 0606S FT43 00 6 FT43 50 5 3 /8-8 06.5.06.8.75 FC5805 0806S FT43 00 6 FT43 50 5 /-4 06.80.35.8.94 FC5805 0608S FT43 00 8 FT43 50 8 3 /8-8 08.7.06.38.88 FC5805 0808S FT43 00 8 FT43 50 9 /-4 08 3.00.35.38.94 FC5805 080S FT43 00 0 FT43 50 9 /-4 0 3.0.38.50.5 FC5805 S FT43 00 FT43 50 3 /4-4 3.0.35.59. FC5805 66S FT43 00 6 FT43 50 3 - / 6 3.97.58.8.38 Female Pipe FC5806 S 37 (JIC) male Flare FC5807 Female pipe FC5806 0404S FT43 00 4 FT43 50 /4-8 04.3.33.5.75 FC5806 0808S FT43 00 8 FT43 50 6 /-4 08.98.33.38.06 S 37 (JIC) male flare FC5807 0403S FT43 00 3 FT43 50 7 /6-0 03.0.30.0.56 FC5807 0404S FT43 00 4 FT43 50 7 /6-0 04.8.8.5.6 FC5807 0504S FT43 00 4 FT43 50 /-0 04.8.8.5.6 FC5807 0505S FT43 00 5 FT43 50 /-0 05.3.05..6 FC5807 0605S FT43 00 5 FT43 50 4 9 /6-8 05.33.06..69 FC5807 0606S FT43 00 6 FT43 50 5 9 /6-8 06.54.09.8.75 FC5807 0806S FT43 00 6 FT43 50 7 3 /4-6 06.64.9.8.8 FC5807 0808S FT43 00 8 FT43 50 8 3 /4-6 08.8.6.38.88 FC5807 008S FT43 00 8 FT43 50 9 7 /8-4 08 3.04.39.38.94 FC5807 00S FT43 00 0 FT43 50 9 7 /8-4 0 3..39.48.06 FC5807 08S FT43 00 8 FT43 50 /6-08 3.08.44.38. FC5807 S FT43 00 FT43 50 /6-3.6.4.59. Two die sets are required for FT43-00. 35

POLYON SWG for use with hose FC37, FC373, FC374, FC375, FC690 ll dimensions in inches. NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. Complete Fitting Part Number ie Part No. Pusher Part No. Thread Size S 45 male flare FC5808 0504S FT43 00 4 FT43 50 /-0 04.9.9.5.6 FC5808 0605S FT43 00 5 FT43 50 5 5 /8-8 05.50...75 FC5808 0606S FT43 00 6 FT43 50 5 5 /8-8 06.60.5.8.75 FC5808 0808S FT43 00 8 FT43 50 8 3 /4-6 08.97.3.38.88 Male O-Ring boss S 45 male flare FC5808 FC5809 0403S FT43 00 3 FT43 50 7 /6-0 03.9..0.56 FC5809 0504S FT43 00 4 FT43 50 /-0 04.99.09.5.6 FC5809 0604S FT43 00 4 FT43 50 4 9 /6-8 04.0..5.69 FC5809 0606S FT43 00 6 FT43 50 5 9 /6-8 06.37.9.8.75 FC5809 0806S FT43 00 6 FT43 50 8 3 /4-6 06.4.97.8.88 FC5809 0808S FT43 00 8 FT43 50 9 3 /4-6 08.7.07.38.94 FC5809 008S FT43 00 8 FT43 50-8 7 /8-4 08.78.3.38.06 FC5809 00S FT43 00 0 FT43 50 8 7 /8-4 0.95.3.48.06 S straight thread O-Ring male** FC5809 S 37 (JIC) swivel FC580 S 37 (JlC) swivel FC580 040S FT43 00 FT43 50 /6-0 0.8..07.6.56 FC580 0303S FT43 00 3 FT43 50 7 3 /8-4 03..3.0.56.56 FC580 0403S* FT43 00 3 FT43 50 0 7 /6-0 03.0.40.0.6.56 FC580 0503S FT43 00 3 FT43 50 /-0 03..4.0.75.56 FC580 0404S* FT43 00 4 FT43 50 7 /6-0 04.37.47.5.6.6 FC580 0504S FT43 00 4 FT43 50 /-0 04.40.50.5.75.6 FC580 0604S FT43 00 4 FT43 50 9 /6-8 04.40.50.5.75.6 FC580 0505S FT43 00 5 FT43 50 /-0 05.48.0..75.6 FC580 0605S FT43 00 5 FT43 50 9 /6-8 05.54.6..75.6 FC580 0606S* FT43 00 6 FT43 50-4 9 /6-8 06.76.3.8.75.75 FC580 0806S FT43 00 6 FT43 50 4 3 /4-6 06.8.36.8.94.75 FC580 006S FT43 00 6 FT43 50 5 7 /8-4 06.90.46.8.00.88 FC580 0808S* FT43 00 8 FT43 50 5 3 /4-6 08 3..46.38.94.88 FC580 008S FT43 00 8 FT43 50 5 7 /8-4 08 3.0.46.38.00.88 FC580 08S FT43 00 8 FT43 50 7 /6-08 3.9.54.38.5.00 FC580 00S FT43 00 0 FT43 50 5 7 /8-4 0 3.36.54.50.00.00 FC580 S* FT43 00 FT43 50 7 /6-3.39.54.59.5. FC580 66S* FT43 00-6 FT43 50 8 5 /6-6 4.4.74.78.50.38 *lso available in 36 stainless steel, substitute 59 for S in base part number when ordering. **67 O-Ring supplied, see page 78 for additional O-Rings. Two die sets are required for FT43-00. 36

POLYON SWG for use with FC37, FC373, FC374, FC375, FC690 Two die sets are required for FT43-00. S 45 swivel Male pipe swivel 45 elbow universal swivel 90 elbow universal swivel FC5936 FC5937 ll dimensions in inches. S 37 (JIC) swivel S 37 (JIC) swivel NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. FC583 FC584 Complete Fitting Part Number ie Part No. Pusher Part No. Thread Size S 45 swivel FC58 0403S FT43 00 3 FT43 50 0 7 /6-0 03.0.40.0.6.56 FC58 0503S FT43 00 3 FT43 50 /-0 03..4.0.75.56 FC58 0404S FT43 00 4 FT43 50 7 /6-0 04.37.47.5.6.6 FC58 0504S FT43 00 4 FT43 50 /-0 04.40.50.5.75.6 FC58 0604S FT43 00 4 FT43 50 3 5 /8-8 04.40.5.5.8.6 FC58 0505S FT43 00 5 FT43 50 /-0 05.48.0..75.6 FC58 0605S FT43 00 5 FT43 50 3 5 /8-8 05.57.30..8.6 FC58 0606S FT43 00 6 FT43 50 3 5 /8-8 06.76.3.8.8.75 FC58 0806S FT43 00 6 FT43 50 4 3 /4-6 06.8.36.8.94.75 FC58 0808S FT43 00 8 FT43 50 5 3 /4-6 08 3..46.38.94.88 FC58 008S FT43 00 8 FT43 50 5 7 /8-4 08 3.0.46.38.00.88 Male pipe swivel FC58 0404S FT43 00 4 FT43 50 3 /4-8 04.74.84.5.69.6 FC58 0606S FT43 00 6 FT43 50 6 3 /8-8 06 3.8.73.8.75.75 FC58 0808S FT43 00 8 FT43 50 0 /-4 08 3.66.96.38.94.88 FC58 S FT43 00 FT43 50 3 /4-4 3.88.03.58.. 45 elbow universal swivel/s 37 (JIC) swivel FC5936 0403S FT43 00 3 FT43 550 4 7 /6-0 03.09.9.0.33.56.56 FC5936 0504S FT43 00 4 FT43 550 5 /-0 04.6.36.5.36.6.6 FC583 0605S FT43 00 5 FT43 550 6 9 /6-8 05.49...39.69.6 FC583 0606S FT43 00 6 FT43 550-8 9 /6-8 06.66..4.39.69.75 FC5936 0806S FT43 00 6 FT43 550 8 3 /4-6 06 3.0.56.8.55.88.88 FC5936 0808S FT43 00 8 FT43 550 8 3 /4-6 08 3..56.37.55.88.88 FC5936 008S FT43 00 8 FT43 550 0 7 /8-4 08 3.3.66.38.64.00.88 FC583 S FT43 00 FT43 550 /6-3.75.9.58.77.5. FC583 66S FT43 00 6 FT4 550 6 5 /6-6 4.57.33.8.07.50.38 90 elbow universal swivel/s 37 (JIC) swivel FC5937 0403S FT43 00 3 FT43 550 4 7 /6-0 03.99.9.0.68.56.56 FC5937 0404S FT43 00 4 FT43 550-5 7 /6-0 04.08.9.5.68.56.6 FC5937 0504S FT43 00 4 FT43 550 5 /-0 04.5.5.5.76.6.6 FC584 0605S FT43 00 5 FT43 550 6 9 /6-8 05.38...85.69.6 FC584 0606S FT43 00 6 FT43 550 8 9 /6-8 06.56..8.85.69.75 FC5937 0806S FT43 00 6 FT43 550 8 3 /4-6 06.78.33.8.09.88.75 FC5937 0808S FT43 00 8 FT43 550 8 3 /4-6 08.98.33.38.09.88.88 FC5937 008S FT43 00 8 FT43 550 0 7 /8-4 08 3.0.36.38.3.00.88 FC584 S FT43 00 FT43 550 /6-3.7.86.59.8.5. FC584 66S FT43 00 6 FT43 550 6 5 /6-6 4.53.4.8.39.50.38 37

POLYON SWG for use with hose FC37, FC373, FC374, FC375, FC690 NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. Complete Fitting Thread Part Number ie Part No. Pusher Part No. T Size C Straight FJ9480 0404S FT43 00 4 FT43 650 4 9 /6-8 04.43.6.54.5.69.6 FJ9480 0606S FT43 00 6 FT43 650 6 /6-6 06.86.7.4.6.8.75 FJ9480 0808S FT43 00 8 FT43 650 8 3 /6-6 08 3.35.87.7.38.94.88 FJ9480 00S FT43 00 0 FT43 650 0-4 0 3.63.97.8.50..00 FJ9480 S FT43 00 FT43 650 3 /6-3.65.07.80.58.38. FJ9480 66S FT43 00 6 FT43 650 6 7 /6-6 4.4.4.0.78.6.38 45 elbow C ORS Swivel Straight FJ9480 ll dimensions in inches. ORS Swivel 45 elbow FJ948 FJ948 0404S FT43 00 4 FT43 550 4 9 /6-8 04.30.40.5.4.69.6 FJ948 0606S FT43 00 6 FT43 550 6 /6-6 06.70.6.4.43.8.75 FJ948 0808S FT43 00 8 FT43 550 8 3 /6-6 08 3.5.6.37.59.94.88 FJ948 S FT43 00 FT43 550 3 /6-3.8.96.58.83.38. FJ948 66S FT43 00 6 FT43 550 6 7 /6-6 4.60..76.94.6.38 ORS Swivel 90 elbow (short) FJ948 ORS Swivel 90 elbow (long) FJ9483 90 elbow (short) FJ948 0404S FT43 00 4 FT43 550 4 9 /6-8 04.5.5.5.8.69.6 FJ948 0606S FT43 00 6 FT43 550 6 /6-6 06.68.4.4.90.8.75 FJ948 0808S FT43 00 8 FT43 550 8 3 /6-6 08 3.0.46.37.5.94.88 FJ948 S FT43 00 FT43 550 3 /6-3.7.86.58.88.38. FJ948 66S FT43 00 6 FT43 550 6 7 /6-6 4.53.4.76..6.38 90 elbow (long) FJ9483 0404S FT43 00 4 FT43 550 4 9 /6-8 04.5.5.5.80.69.6 FJ9483 0606S FT43 00 6 FT43 550 6 /6-6 06.68.4.4.3.8.75 FJ9483 0808S FT43 00 8 FT43 550 8 3 /6-6 08 3.0.46.37.5.94.88 FJ9483 S FT43 00 FT43 550 3 /6-3.7.86.58 3.78.38. FJ9483 66S FT43 00 6 FT43 550 6 7 /6-6 4.53.4.76 4.50.6.38 Two die sets are required for FT43-00. See page 78 for O-Rings. 38

SWG for use with hose FC70, FC70 ll dimensions in inches. Complete Fitting Thread Part Number ie Part No. Pusher Part No. T Size C Swage male pipe FJ937 S FT43 00 FT43 50 3 /4-4 3.0.35.58 FT84 00 FT84 50 FJ500 S** FT43 00 FT43 50 3 /4-4 3.0.35.58 FT84 00 FT84 50 FJ937 66S FT43 00 6 FT43 50 3 - / 6 3.7.58.78 FT84 00 6 FT84 50 6 FJ937 00S FT43 00 0 FT43 50 0 /4- / 0 4.35.99.0 FT84 00 0 30 FT84 50 0 Swage male pipe fitting FJ937/FJ500 Swage hose mender fitting FJ9373/FJ7938/FJ50 Swage hose mender Yoke Part No. FJ9373 S FT84 00 * FT84 50 3.38.38.58 FJ50 S** FT84 00 * FT84 50 3.38.38.58 FJ7938 66S FT84 00 6* FT84 50 6 6 4.00.46.8 FJ9373 00S FT84 00 0* FT84 50 0 0 4.9.5.0 *Two die sets are required for assembly of the swage mender fitting when using the FT84 tool. **For FC70 hose only. 39

PTF CRIMP for use with hose 807, FC86, FC465, FC645 Male Pipe S 37 (JIC) swivel ll dimensions in inches. FC9846 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size X X Male pipe FC9846 004S* FC3680 004S** FC3596 04S /8-7 04.5.66..44 FC9846 0404S* FC3680 0404S** FC3596 04S /4-8 04.50.9..56 FC9846 0405S* FC3680 0405S** FC3443 04S /4-8 05.40.9.9.56 FC9846 0406S* FC3680 0406S** FC3443 05S /4-8 06.40.9.5.56 FC9846 0606S* FC3680 0606S** FC3443 05S 3 /8-8 06.40.9.5.69 FC9846 0608S* FC3680 0608S** FC3596 08S 3 /8-8 08.80.9.34.69 FC9846 0808S* FC3680 0808S** FC3596 08S /-4 08.04.6.34.88 FC9846 080S* FC3680 080S** FC3443 08S /-4 0.04.6.44.88 FC9846 S* FC3680 S** FC3596 S 3 /4-4.04.6.56.06 FC9846 66S* FC3680 66S** FC3596 6S - / 6.3.44.80.38 Male pipe stainless steel FC9846 004 333 FC3680 004 39 FC3596 04C /8-7 04.5.66..44 FC9846 0404 333 FC3680 0404 39 FC3596 04C /4-8 04.50.9..56 FC9846 0405 333 FC3680 0405 39 FC3443 04C /4-8 05.40.9.9.56 FC9846 0406 333 FC3680 0406 39 FC3443 05C /4-8 06.40.9.5.56 FC9846 0606 333 FC3680 0606 39 FC3443 05C 3 /8-8 06.40.9.5.69 FC9846 0608 333 FC3680 0608 39 FC3596 08C 3 /8-8 08.80.9.34.69 FC9846 080 333 FC3680 080 39 FC3443 08C /-4 0.04.6.44.88 FC9846 333 FC3680 39 FC3596 C 3 /4-4.04.6.56.06 FC9846 66 333 FC3680 66 39 FC3596 6C - / 6.3.44.80.38 S 37 (JIC) swivel FC9779 0404S FC8779 0404S FC3596 04S 7 /6-0 04.55.96..56.44 FC9779 0505S FC8779 0505S FC3443 04S /-0 05.50.0.9.6.50 FC9779 0606S FC8779 0606S FC3443 05S 9 /6-8 06.60..5.69.56 FC9779 0808S FC8779 0808S FC3596 08S 3 /4-6 08.0..34.88.69 FC9779 00S FC8779 00S FC3443 08S 7 /8-4 0..3.44.00.8 FC9779 S FC8779 S FC3596 S /6-.9.4.56.5.00 FC9779 66S FC8779 66S FC3596 6S 5 /6-6.5.64.80.50.5 S 37 (JIC) swivel stainless steel 30 FC9779 0404 333 FC8779 0404 333 FC3596 04C 7 /6-0 04.55.96..56.44 FC9779 0505 333 FC8779 0505 333 FC3443 04C /-0 05.50.0.9.6.50 FC9779 0606 333 FC8779 0606 333 FC3443 05C 9 /6-8 06.60..5.69.56 FC9779 0808 333 FC8779 0808 333 FC3596 08C 3 /4-6 08.0..34.88.69 FC9779 00 333 FC8779 00 333 FC3443 08C 7 /8-4 0..3.44.00.8 FC9779 333 FC8779 333 FC3596 C /6-.9.4.56.5.00 FC9779 66 333 FC8779 66 333 FC3596 6C 5 /6-6.5.64.80.50.5 *For Brass drop S suffix, replace with 38. **For Brass drop S suffix, replace with B. For Brass drop S suffix, replace with 63. 40

PTF CRIMP for use with hose 807, FC86, FC465, FC645 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy.* Socket Thread Size S 45 swivel S 45 swivel FC76 FC76 0404S FC66 0404S FC3596 04S 7 /6-0 04.55.96..56.44 FC76 0505S FC66 0505S FC3443 04S /-0 05.50.0.9.6.50 FC76 0606S FC66 0606S FC3443 05S 5 /8-8 06.63.4.5.75.56 FC76 0808S FC66 0808S FC3596 08S 3 /4-6 08.0..34.88.69 FC76 00S FC66 00S FC3443 08S 7 /8-4 0..3.44.00.8 FC76 S FC66 S FC3596 S /6-4.9.4.56.5.00 45 elbow universal FC70 90 elbow FC5098 universal FC77 S 45 45 elbow FC70 0808S FC60 0808S FC3596 08S 3 /4-6 08.6.7.36.55.88 90 elbow FC5098 0404S FC4098 0404S FC3596 04S 7 /6-0 04.8.69..68.56 FC77 0606S FC67 0606S FC3443 05S 5 /8-8 06.3.8.5.85.75 *vailable with brass nipples, contact aton eroquip. 4

PTF CRIMP for use with FC363, FC364, FC563 ll dimensions in inches. Complete Fitting Component Part Numbers Male pipe stainless steel Part Number Nipple ssy. Socket Stainless Steel Stainless Steel Stainless Steel Thread Size K FJ9588 0808 34 FC349 0808 59 FC347 08 39 /-4 08.54.30.4.88 FJ9588 34 FC349 59 FC347 39 3 /4-4.6.37.6. FJ9588 66 34 FC349 66 59 FC347 6 39 - / 6.80.55.8.38 FJ9588 00 34 FC349 00 59 FC347 0 39 /4- / 0.95.70.05.75 FJ9588 44 34 FC349 44 59 FC347 4 39 /- / 4 3.0.74.8.00 FJ9588 33 34 FC349 33 59 FC347 3 39 - / 3 3.46.96.75.50 S 37 (JIC) swivel stainless steel FJ9587 0808 33 FJ8587 0808 33 FC347 08 39 3 /4-6 08.5.0.38.88 FJ9587 33 FJ8587 33 FC347 39 /6-.55.3.6.5 FJ9587 66 33 FJ8587 66 33 FC347 6 39 5 /6-6.69.37.8.50 FJ9587 00 33 FJ8587 00 33 FC347 0 39 5 /8-0.84.5.05.00 FJ9587 44 33 FJ8587 44 33 FC347 4 39 7 /8-4 3..67.8.5 FJ9587 33 33 FJ8587 33 33 FC347 3 39 /- 3 3.50.9.75.88 Flange retainer stainless steel FJ9656 0808 33 FC373 0808 59 FC347 08 39 08.56.4.4.38 FJ9656 33 FC373 59 FC347 39.56.4.6.69 FJ9656 66 33 FC373 66 59 FC347 6 39 6.6.30.8.00 FJ9656 00 33 FC373 00 59 FC347 0 39 0.6.30.05.50 FJ9656 44 33 FC373 44 59 FC347 4 39 4 3.0.48.8.87 FJ9656 33 33 FC373 33 59 FC347 3 39 3 3.05.48.75 3.6 Flange retainer with PTF coated nipple FJ9656 0808 338 FC373 0808 337 FC347 08 39 08.56.4.4.38 FJ9656 338 FC373 337 FC347 39.56.4.6.69 FJ9656 66 338 FC373 66 337 FC347 6 39 6.6.30.8.00 FJ9656 00 338 FC373 00 337 FC347 0 39 0.6.30.05.50 FJ9656 44 338 FC373 44 337 FC347 4 39 4 3.0.48.8.87 FJ9656 33 338 FC373 33 337 FC347 3 39 3 3.05.48.75 3.6 Ladish Tri-Clamp* FJ704 46 33 FC53 46 59 FC347 6 39 6.98.76.8.98 FJ704 44 33 FC53 44 59 FC347 4 39 4.4.76.7.98 FJ704 33 33 FC53 33 59 FC347 3 39 3.4.76.75.5 *Tri-Clamp is a registered trademark of the Ladish Co., Tri-clover ivision. J 30 Male Pipe FJ9588 M I. Flange FC389 L I. S 37 (JIC) swivel FJ9587 K Flange Retainer FJ9656 Flange Retainer with PTF coated nipple FJ9656 Part Number Number Stainless Bolt Steel Size oles J L M FC389 0808C 08 4 3.50.38.6 FC389 C 4 3.88.75.6 FC389 66C 6 4 4.5 3..6 FC389 00C 0 4 4.6 3.50.6 FC389 44C 4 4 5.00 3.88.6 FC389 33C 3 4 6.00 4.75.75 K K Ladish Tri-Clamp* FJ704 4

SUCTION OS for use with 66, FC38 ll dimensions in inches. Complete Component Part Numbers Thread Fitting Flange ead Part Number Nipple ssy. Socket ia. Kφ Size φ Straight split flange Code 6 (SJ58) FC953 4040S FC853 4040S FC303 40S 3.3 40 5.67.96.0 45 elbow split flange Code 6 (SJ58) FC955 4040S FC855 4040S FC303 40S 3.3 40 6.89 4.8.0.66 90 elbow split flange Code 6 (SJ58) K Straight split flange Code 6 FC953 FC95 4040S FC85 4040S FC303 40S 3.3 40 7.58 4.87.0 5.9 K 45 elbow split flange Code 6 FC955 K 90 elbow split flange Code 6 FC95 NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 43

RUSBL ash Size Thread Size φ 4 4S* /8-7 04.68.9.7 4 4S* /4-8 04.86..7 5S* /8-7 05.78.00.3 4 5S* /4-8 05.96.8.3 4 6S* /4-8 06.3.3.30 6 6S 3 /8-8 06.3.3.4 6 8S* 3 /8-8 08.48.33.39 8 8S /-4 08.73.58.36 8 0S* /-4 0.88.59.48 0S* 3 /4-4 0.94.65.48 S* 3 /4-4 3.4.67.6 6S 3 /4-4 6.80.53.8 6 6S - / 6.99.7.8 6 0S - / 0 3.0.84.95 0 0S /4- / 0 3.3.87.05 0 4S /4- / 4 3.58..8 4 4S /- / 4 3.48.03.8 3 3S - / 3 4.05.0.75 44 4 40 40 /-8 40 5.03 3.3. 48 48 3-8 48 5.09 3.9.69 ash Size Thread Size φ 44 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Male pipe 4 44 4 Male pipe 44 4S /8-7 04.68.93.3 4 4S /4-8 04.87..3 4 5S /4-8 05.96.8.7 4 6S /4-8 06.3.3.4 6 6S 3 /8-8 06.3.3.3 4 8S /4-8 08.48.33.30 6 8S 3 /8-8 08.48.33.36 8 8S /-4 08.73.58.36 8 0S /-4 0.88.59.46 0S 3 /4-4 0.94.65.46 8 S /-4 3.4.68.49 S 3 /4-4 3.4.67.55 S 37 (JIC) swivel* 4 44 4 ash Size Thread Size φ 4 4S* 7 /6-0 4.75.00.7 5S* /-0 5.90..3 6S* 9 /6-8 6.05.5.30 8S* 3 /4-6 8.5.38.39 0S* 7 /8-4 0.80.5.48 S* /6-3.5.58.6 6S* 5 /6-6.8.55.8 0S* 5 /8-0 3.00.64.05 4S* 7 /8-4 3.8.83.8 3S* /- 3 3.88.03.75 44 4 40* 3-40 4.6.5.0 48* 3 /- 48 4.8.38.80 S 37 (JIC) swivel 44 ash Size Thread Size φ 44 4S 7 /6-0 04.97.3.3 4-5S 7 /6-0 05.08.30.7 5S /-0 05..35.8 6S 9 /6-8 06.33.43.4 8 6S 3 /4-6 06.4.5.4 6 8S 9 /6-8 08.68.53.30 8S 3 /4-6 08.78.6.36 0 8S 7 /8-4 08.95.80.36 8 0S 3 /4-6 0.9.64.39 0S 7 /8-4 0 3.0.8.46 0S /6-0 3.9.9.46 0 S 7 /8-4 3.40.83.55 S /6-3.49.9.55 4 S 3 /6-3.56.99.55 6S 5 /6-6 3.9.93.8 0S 5 /8-0 3.43.07.05 0 4S 5 /8-4 3.65.9.06 4S 7 /8-4 3.68..8 3S /- 3 4.39.55.75 *Requires assembly tools for assembly. S 45 swivel * 40 ash Size Thread Size φ 40 4S* 7 /6-0 04.75.00.7 5S* /-0 05.90..3 6S* 5 /8-8 06.05.5.30 8S* 3 /4-6 08.5.38.39 0S* 7 /8-4 0.80.5.48 S* /6-4 3.0.45.6 S 45 swivel 440 ash Size Thread Size φ 440 4S 7 /6-0 04.97..3 5S /-0 05..34.7 6S 5 /8-8 06.36.46.4 8S 3 /4-6 08.78.6.36 0S 7 /8-4 0 3.0.8.46 S /6-4 3.49.9.55 PTT swivel* 406 ash Size Thread Size φ 406 6B 5 /6-4 6.60.33.8 0B 5 /8-4 0.86.50.05 4B 7 /8-4 4 3.3.67.8 NOT: For correct socket part number, see page 73. lso supplied in brass. To order substitute B for S in part number. Wet air brake system can cause fitting corrosion, if encountered use an all brass fitting (substitute B for S in part number, or steel fittings with brass nipples (add 63 prefix and drop S suffix in part number). vailable in stainless steel. To order drop the S suffix and add 59 prefix. lso supplied in steel. To order drop B suffix and substitute S in part number. R U S B L ll dimensions in inches. 45

RUSBL R U S B L S male O-Ring boss** 90463 ash Size Thread Size φ 90463 6S 9 /6-8 06.95.05.4 8S 3 /4-6 08.35.0.36 0S 7 /8-4 0.63.34.36 S 37 (JIC) male flare 444 ash Size Thread Size φ 444 4S 7 /6-0 04.85.0.3 5S /-0 05.95.7.7 6S 9 /6-8 06...4 8S 3 /4-6 08.57.4.36 0S 7 /8-4 0.88.60.46 0S /6-0 3.05.76.46 S /6-3.35.78.55 6 S 5 /6-3.40.83.55 6S 5 /6-6.96.69.8 0S 5 /8-0 3..86.05 4S 7 /8-4 3.44.99.8 3S /- 3 4..38.75 S 45 male flare 440 ash Size Thread Size φ 440 4S 7 /6-0 04.80.06.3 4 5S 7 /6-0 05.90..7 5S /-0 05.97.8.7 6S 5 /8-8 06.9.8.4 8S 3 /4-6 08.66.5.36 0S 7 /8-4 0 3.00.7.46 0S /6-4 0 3.0.90.46 S /6-4 3.50.9.56 **See page 78 for O-Rings. B dimension is counterbore diameter for mating tubing. vailable in stainless steel. To order drop the S suffix and add 59 prefix. LIFSVR 90000 ash Tube Size Size Size B φ 90000 4S /4 04.36.5.6.3 5S 5 /6 05.53.3.75.8 5 6S 5 /6 06.63.3.73.4 6S 3 /8 06.63.38.73.4 6 8S 3 /8 08.04.38.89.8 8S / 08.04.50.89.36 0S 5 /8 0.9.6.90.46 8 S /.49.50.9.39 S 3 /4.49.75.9.55 6S 6.05.00.78.8 6 0S 0.6.00.90.8 8 0S /8 0.6..90.94 0S /4 0.6.5.90.05 4 0S / 0.33.50.96.05 6 4S 4.4.00.97.8 0 4S /4 4.36.5.90.05 4 4S / 4.4.50.97.8 0 3S /4 3.89.5.05.06 4 3S / 3.83.50.98.37 3 3S 3.89.00.05.75 40S / 40 3.6.50.36. 45 elbow 9097 Universal swivel 9099 S 45 swivel 9065 S 37 (JIC) swivel ash Size Thread Size φ 9097 4S 7 /6-0 04.85.0.3.33 4 5S 7 /6-0 05.0.3.5.33 5S /-0 05.07.9.8.36 8 6S 3 /4-6 06.64.74.4.55 8S 3 /4-6 -08.99.84.36.55 8 0S 3 /4-6 0 3.4.85.39.55 0S 7 /8-4 0 3.4.95.46.64 0 S 7 /8-4 3.54.97.48.64 9099 6S 5 /8-8 06.3.33.4.39 S /6-4 3.78..55.78 45 elbow (continued) 9097 Universal swivel 9099 S 45 swivel 9065 S 37 (JIC) swivel ash Size Thread Size φ 9065 6 5S 9 /6-8 05.3.35.7.39 6S 9 /6-8 06.3.33.4.39 S /6-3.78..55.78 6 S 5 /6-4.00.43.55.99 6S 5 /6-6 3.74.47.8.07 0S 5 /8-0 4..85.05. 90 elbow (short) 9096 Universal swivel 9030 S 45 swivel 906 S 37 (JIC) swivel 90 elbow (long) 9095 Universal swivel 9030 S 45 swivel 9060 S 37 (JIC) swivel ash Size Thread Size φ 9096 4S 7 /6-0 04.74.99.3.68 5S /-0 05.96.8.7.77 8S 3 /4-6 08.76.6.36.09 0S 7 /8-4 0.94.65.46.3 8 S 3 /4-6 3..64.39.09 9030 6S 5 /8-8 06.3.3.4.85 S /6-4 3.74.7.55.8 906 6S 9 /6-8 06.3.3.4.85 S /6-3.74.7.55.8 6 S 5 /6-3.74.7.55.4 6S 5 /6-6 3.55.8.8.39 0 6S 5 /8-6 3.55.8.76.50 0S 5 /8-0 4.0.65.05.75 0 4S 5 /8-4 4..66.05.75 9095 4S 7 /6-0 04.74.99.3.80 5S /-0 05.96.8.8.77 8S 3 /4-6 08.88.73.36.43 0S 7 /8-4 0 3.9.90.46.57 0 S 7 /8-4 3.49.9.48.57 9030 6S 5 /8-8 06.3.3.4.8 S /6-4 3.74.7.55 3.73 9060 6S 9 /6-8 06.3.3.4.8 S /6-3.74.7.55 3.73 6S 5 /6-6 3.55.8.8 4.58 0S 5 /8-0 4.0.65.05 5.53 ll dimensions in inches. NOT: For correct socket part number, see page 73. 46

RUSBL 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Code 6 S J58 Straight split flange 4775 Flange ash ead Size ia. Size Ø 4775 8S.9 08.77.6.36 8 0S.9 0 3.3.03.46 6 0S.75 0.97.68.46 S.50 3.6.59.55 6 S.75 3.55.98.55 0 S.00 3.55.98.55 6S.75 6.77.50.8 0 6S.00 6 3.36.09.8 4 6S.38 6 3.4.4.8 6 0S.75 0.99.6.8 0S.00 0 3.58..05 3 0S.8 0 3.64.8.05 6 4S.75 4 3.73.8.8 0 4S.00 4 3.67..05 4S.38 4 4.0.56.8 3 4S.8 4 4.0.56.8 0 3S.00 3 5.6 3.4.06 4 3S.38 3 4.4.58.37 3S.8 3 4.9 3.08.75 40 3S 3.3 3 4.98 3.4.75 Code 6 S J58 / split flange 4776 Flange ash ead Size ia. Size Ø 4776 6S.75 6 3.55.8.8.50 3 6S.8 6 3.5.6.8.49 0S.00 0 3.8.45.05.50 3 0S.8 0S 3.88.5.05.5 3S.8 3 4.59.75.75.50 Code 6 S J58 30 split flange 90846 Flange ash ead Size ia. Size Ø 90846 6 S.75 3.60.03.55.45 6S.75 6 3.3.05.8.50 0 6S.00 6 3.3.05.8.50 0S.00 0 3.63.6.05.5 4S.38 4 3.96.5.8.58 3S.8 3 4.68.84.75.65 Code 6 S J58 45 split flange 4777 Flange ash ead Size ia. Size Ø 4777 8S.9 08 3.44.30.36.00 S.50 4.0.45.55.00 6 S.75 4.0.45.55.00 0 S.00 4.0.45.55.00 6S.75 6 3.80.53.8. 6 0S.75 0 4.0.65.8. 0 6S.00 6 3.80.53.8. 0S.00 0 4..75.05. 4 0S.38 0 4..75.05. 3 0S.8 0 4.6.80.05.7 4S.38 4 4.38.9.8. 4 3S.38 3 4.78.94.37. 3 4S.8 4 4.38.9.8. 3S.8 3 5.8 3.33.75.5 40 3S 3.3 3 5. 3.38.75.30 Code 6 S J58 60 split flange 9395 Flange ash ead Size ia. Size Ø 9395 S.50 4.5.58.55.6 6S.75 6 3.86.60.8.64 0S.00 0 4..86.05.64 4S.38 4 4.73 3.8.8.00 Code 6 S J58 90 split flange 4779 Flange ash ead Size ia. Size Ø 4779 8S.9 08.88.73.36.6 S.50 3.74.7.55. 6 S.75 3.74.7.55. 6S.50 6 3.30.03.8. 6S.75 6 3.55.8.8.38 0 6S.00 6 3.55.8.8.38 6 0S.75 0 3.76.40.8.38 0S.00 0 4.0.65.05.50 4 0S.38 0 4.0.65.05.50 3 0S.8 0 4.0.65.05.56 0 4S.00 4 4..66.05.50 4S.38 4 4.4.97.8.75 4 3S.38 3 4.83.98.37.75 3S.8 3 5.39 3.55.75 3.5 40 3S 3.3 3 5.39 3.55.75 3.3 R U S B L *ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings see pages 76-79. NOT: For correct socket part number, see page 73. 47

RUSBL Male inverted flare 9077 ash Size Thread Size Ø 9077 4S 7 /6-0 04.80.05.3 Male/female inverted flare 9076 ash Size Thread Size Ø 9076 4S 5 /8-8(M) 04.05.30.3 7 /6-4(F) Straight S male inverted flare 90 ash Size Thread Size Ø 90 4S 7 /6-4 04.46.7.3 5S /-0 05.6.84.8 5 6S /-0 06.7.8.4 6S 5 /8-8 06.7.8.4 6-8S 5 /8-8 08 3.3.98.8 8S 3 /4-8 08 3.0.05.36 5 elbow S male inverted flare 90350 ash Size Thread Size Ø 90350 6S 5 /8-8 06 3.6.36.4.37 90 elbow (short) S male inverted flare 9035 90 elbow (long) S male inverted flare 9035 ash Size Thread Size Ø 9035 4S 7 /6-4 04.36.6.3.69 7 4S /6-8 04..36.3.84 8 4S 3 /4-8 04..36.3.84 5S /-0 05.53.75.8.69 6S 5 /8-8 06.63.73.4.73 7 6S /6-8 06.63.73.4.73 6 8S 5 /8-8 08 3.04.89.8.73 7 8S /6-8 08 3.04.89.8.73 8S 3 /4-8 08 3.04.89.36.75 0S 7 /8-8 0 3.44.5.46. 8 S 3 /4-8 3.49.9.39.75 9035 6S 5 /8-8 06 3.67.77.4.73 Female inverted flare 403 R U S B L ash Size Thread Size Ø 403 5S /-0 05.6.84.3 6S 5 /8-8 06.78.88.30 Compression ball sleeve FC703 ash Tube Size Size Size Ø FC703 0808 06 / 08.36.0.36 00 06 5 /8 0.6.34.46 45 elbow S male inverted flare 9037 ash Size Thread Size Ø 9037 4S 7 /6-0 04.74.99.3.96 5S /-0 05.90..7.96 6S 5 /8-8 06 3.00.0.4.96 8S 3 /4-8 08 3.39.4.36.93 0S 7 /8-8 0 3.74.44.46.03 *ll dimensions in inches. NOT: For correct socket part number, see page 73. 48

RUSBL 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 ORS Swivel Straight FJ9706 ash T Size Thread Size φ FJ9706 0404S 9 /6-8 04.09.34.3 0405S 9 /6-8 05.03.5.7 0606S /6-6 06.43.53.4 0808S 3 /6-6 08 3.3.98.36 00S -4 0 3.37.08.46 S 3 /6-3.68..55 66S 7 /6-6 3.50.3.8 00S /6-0 3.64.8.05 44S - 4 3.86.40.6 ORS Swivel 45 lbow FJ9707 ash T Size Thread Size φ FJ9707 0404S 9 /6-8 04.96..3.4 0606S /6-6 06.7.37..43 0806S 3 /6-6 06.68.78.4.59 0808S 3 /6-6 08 3.03.88.36.59 00S -4 0 3.38.08.46.65 S 3 /6-3.84.7.55.83 66S 7 /6-6 3.6.35.76.94 00S /6-0 4.09.7.0.00 44S - 4 4.3.87.6.07 ORS Swivel 90 lbow short drop FJ9708 ash T Size Thread Size φ FJ9708 0404S 9 /6-8 04.80.05.3.8 0606S /6-6 06.3.3..90 0808S 3 /6-6 08.76.6.36.5 00S -4 0 3.03.74.46.7 S 3 /6-3.74.7.55.88 66S 7 /6-6 3.55.8.76. 00S /6-0 4.0.65.0.5 44S - 4 4.4.97.6.70 ORS Swivel 90 lbow long drop FJ9709 ash T Size Thread Size φ FJ9709 0404S 9 /6-8 04.80.05.3.80 0606S /6-6 06.5.35..3 0808S 3 /6-6 08.88.73.36.5 00S -4 0 3.03.74.46.76 S 3 /6-3.74.7.55 3.78 66S 7 /6-6 3.55.7.76 4.50 00S /6-0 4.0.65.0 5.09 44S - 4 4.4.97.6 5.54 BSP 00R5 Style Reusble fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 BSP male 07.340 ash Size Thread Size φ 07.340 4 4 /4-9 04.83.08.3 46.5 7.5 3. 6 6 3 /8-9 06.09.8.4 53 30 6.0 8 8 /-4 08.5.35.35 64 34.5 9.0 0 0 5 /8-4 0.80.50.45 7 38.5 3 /4-4 3.3.56.55 79.5 39.5 4.0 6 6-6.8.54.83 7.5 39.0 0 0 /4-0.9.56.04 74 39.5 6.5 4 4 /- 4 3.05.59.8 77.5 40.5 3.5 3 3-3 3.76.9.75 95.5 48.5 44.5 BSP female swivel 07.4 ash Size Thread Size φ 07.4 4 4 /4-9 04.05.30.3 5 33 3. 6 6 3 /8-9 06.34.44.4 59.5 36.5 6.0 8 6 /-9 06.40.50.4 6 38 6.0 8 8 /-4 08.76.59.35 70 40.5 9.0 0 0 5 /8-4 0.97.69.45 75.5 43.5 0 3 /4-4 0 3.03.73.45 77 44.5 3 /4-4 3.33.75.55 84.5 44.5 4.0 6 6-6 3.07.79.83 78 45.5.0 0 0 /4-0 3..85.04 8.5 47 6.5 4 4 /- 4 3.43.97.8 87 50 3.5 3 3-3 3.98.3.75 0 54 44.5 R U S B L inches in bold type millimeters in light type NOT: For correct socket part number, see page 73. 49

RUSBL R U S B L Metric 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Metric male 60 IN 763/7647 07.04 ash Size Thread Size φ 07.04 4 4 M.77.0.3 x.5 04 45 6 3. 6 5 M4.87.08.8 x.5 05 47.5 7.5 4.5 8 6 M6.97.06.4 x.5 06 50 7 6.0 0 8 M8.3.8.35 x.5 08 59 30 9.0 3 0 M.56.6.45 x.5 0 65 3.5 6 M6.85.8.55 x.5 7.5 3.5 4.0 0 6 M30.48..83 x.5 6 63 3.0 5 0 M38.66.30.04 x.5 0 67.5 33 6.5 3 4 M45.76.30.8 x.5 4 70 33 3.5 40 3 M5 3.3.46.8 x.5 3 84 37 44.5 50 3 M65 3.4.57.75 x 3 87 40 44.5 60 40 M78 3.7.8.0 x 40 94.5 46 56.0 70 48 M90 3.96.05.80 x 48 00.5 5 7.0 Metric male 4 IN 390/390 I.Rh. 07.003 ash Size Thread Size φ Rφ* 07.003 6 4 M.77.0.3.4 x.5 04 45 6 3. 6 8 5 M4.87.08.8.3 x.5 05 47.5 7.5 4.5 8 0 6 M6.0.0.4.39 x.5 06 5 8 6.0 0 6 M8.0.0.4.47 x.5 06 5 8 6.0 8 M8.36.0.35.47 x.5 08 60 30.5 9.0 5 0 M.56.6.45.59 x.5 0 65 3.5 5 8 0 M6.56.6.45.7 x.5 0 65 3.5 8 8 M6.85.8.55.7 x.5 7.5 3.5 4.0 8 6 M30.56.8.83.87 x 6 65 3.5.0 8 0 M36.66.30.04.0 x 0 67.5 33 6.5 8 35 4 M45.83.38.8.38 x 4 7 35 3.5 35 4 3 M5 3.38.54.75.65 x 3 86 39 44.5 4 Metric male 4 IN 390/390 s.rh. 07.06 ash Size Thread Size φ Rφ* 07.06 8 4 M6.85.0.3.3 x.5 04 47 8 3. 8 0 5 M8.95.6.8.39 x.5 05 49.5 9.5 4.5 0 6 M0.05.4.4.47 x.5 06 5 9 6.0 4 8 M.48.3.35.55 x.5 08 63 33.5 9.0 4 6 0 M4.64.34.45.63 x.5 0 67 34.5 6 0 M30 3.09.5.55.79 x 78.5 38.5 4.0 0 5 6 M36.7.44.83.98 x 6 69 36.5.0 5 30 0 M4.89.54.04.8 x 0 73.5 39 6.5 30 38 4 M5 3.5.69.8.50 x 4 80 43 3.5 38 Metric universal female swivel 60 IN 763/7647 07.00 /07.036 ash Size Thread Size φ 07.00 4 4 M.0.6.3 x.5 04 5 3 3. 6 5 M4..3.8 x.5 05 53.5 33.5 4.5 8 6 M6..3.4 x.5 06 56.5 33.5 6.0 0 8 M8.64.48.35 x.5 08 67 37.5 9.0 3 0 M.87.59.45 x.5 0 73 40.5.5 6 M6 3.9.7.55 x.5 83.5 43.5 4.0 07.036 0 6 M30.85.6.83 x.5 6 7.5 40.9.0 5 0 M38 3.0.65.04 x.5 0 76.5 4 6.5 3 4 M45 3.3.77.8 x.50 4 8 45 3.5 40 3 M5 3.68.83.75 x.5 3 93.5 46.5 44.5 50 3 M65 3.68.83.75 x 3 93.5 46.5 44.5 60 40 M78 4.06.5.0 x 40 03 54.5 56.0 70 48 M90 4.7.36.80 x 48 08.5 60 7.0 inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page 73. 50

RUSBL ash Size Thread Size ø Rø 07.00 4 4 6 5 8 6 0 8 3 0 6 Metric 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Metric universal female swivel 4 IN 390/390 l.rh. 07.00 M 04.0.6.3.4 x.5 5 3 3. 6 M4 05..3.8.3 x.5 53.5 33.5 4.5 8 M6 06..3.4.39 x.5 56.5 33.5 6.0 0 M8 08.64.48.35.47 x.5 67 37.5 9.0 M 0.87.59.45.59 x.5 73 40.5.5 5 M6 3.9.7.55.7 x.5 83.5 43.5 4.0 8 Metric universal female swivel 4 IN 390/390 s.rh. 07.55 ash Size Thread Size ø Rø 07.55 8 4 0 5 6 4 8 6 0 0 5 6 30 0 38 4 M6 04.07.3.3.3 x.5 5.5 33.5 3. 8 M8 05.7.38.8.39 x.5 55 35 4.5 0 M0 06.34.44.4.47 x.5 59.5 36.5 6.0 M 08.70.54.35.55 x.5 68.5 39 9.0 4 M4 0.93.63.45.63 x.5 74.5 4.5.5 6 M30 3.37.79.55.79 x 85.5 45.5 4.0 0 M36 6.95.67.83.98 x.75 4.5.0 5 M4 0 3.09.73.04.8 x 78.5 44 6.5 30 M5 4 3.3.85.8.50 x 84 47 3.5 38 ash Size Thread Size ø FC5954 0306S 040S 05S 06S 06S 44S Komatsu 30 metric female swivel FC5954 M8 06.49.59.4 x.5 63.3 40.4 6. M 0 3.0.8.37 x.5 78.7 46. 9.4 M4 3.55.98.48 x.5 90. 50.3. M30 3.76.9.55 x.5 95.5 55.6 4 M33 6 3.55.8.8 x.5 90. 57.9 0.8 M4 4 4..67.9 x.5 07.7 67.8 30. 6 M30 6.9.63.83.87 x 74 4.5.0 8 0 M36 0 3.07.7.04.0 x 78 43.5 6.5 8 35 4 M45 4 3..75.8.38 x 8.5 44.5 3.5 35 4 3 M5 3 3.70.85.75.65 x 94 47 44.5 4 R U S B L inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page 73. 5

RUSBL Bump tube O-Ring seal for use with Refrigeration 540, FC558, FC80 ll dimensions in inches. Male FC7646 /FC7049 Pilot Part Number O.. Length Thread Size ø M Male (short pilot) FC7646 0606S.337.8 5 /8-8 06 3.03.3.4.8 FC7646 0808S.46.8 3 /4-8 08 3.43.8.36.8 FC7646 00S.570.8 7 /8-8 0 3.85.56.46.8 Male (long pilot) FC7049 0606S.337.8 5 /8-8 06 3.03.3.4.8 FC7049 0808S.46.38 3 /4-8 08 3.63.48.36.38 FC7049 00S.570.38 7 /8-8 0 3.85.56.46.38 Male 90 elbow (short pilot) FC766 0606S.337.8 5 /8-8 06.47.57.4.76.8 FC766 00S.570.8 7 /8-8 0 3.8.99.46.06.8 Male 90 elbow (long pilot) Male 90 elbow FC766 /FC7474 FC7474 0606S.337.8 5 /8-8 06.7.8.4.30.8 FC7474 00S.570.38 7 /8-8 0 3.8.99.46.83.38 NOT: O Rings must be ordered separately. Order by part number 546 for 06 size fittings, 546 3 for 08 size fittings, 546 5 for 0 size fittings and 546 7 for size fittings. See page 78. R U S B L Female FC7048 Female 90 elbow FC7573 Pilot Part Number O.. Length Thread Size ø M Female (long pilot) FC7048 0606S.337.8 5 /8 8 06.67.77..9 FC7048 0808S.46.38 3 /4 6 08 3.7..36.38 FC7048 00S.570.38 7 /8 4 0 3.6.3.46.44 FC7048 S.695.57 /6 4 4.00.44.55.57 Female 90 elbow (long pilot) FC7573 0606S.337.8 5 /8 8 06.7.8.4.7.9 FC7573 0808S.46.38 3 /4 6 08 3.50.35.36.4.38 FC7573 00S.570.38 7 /8 4 0 4..93.46.50.44 FC7573 0S.695.38 /6 4 0 4.69 3.40.46.99.57 FC7573 S.695.57 /6 4 4.99 3.4.55.99.57 ll dimensions in inches. NOT: For correct socket part number, see page 73. 5

RUSBL Polyon Reusable fittings for use with FC37, FC373 Male pipe FJ50 ash Size Thread Size φ FJ50 0404S /4-8 04.50.5.7 0606S 3 /8-8 06.4.7.3 0808S /-4 08 3.0.50.40 S 37 (JIC) swivel FJ500 ash Size Thread Size φ FJ500 0404S 7 /6-0 04.60.35.7 0606S 9 /6-8 06.60.36.30 0808S 3 /4-6 08 3.0.59.39 S /6-3.78.78.6 00R TTC Reusable fittings for use with FC, G663 Male pipe FC7985 ash T Size Thread Size φ FC7985 004S /8-7 04.7.3.7 0404S /4-8 04.36.3.7 0406S /4-8 06.68.55.30 0606S 3 /8-8 06.68.55.3 0608S 3 /8-8 08.8.35.39 0808S /-4 08 3.07.60.39 S 3 /4-4 3.55.95.6 66S - / 6 4.5.3.8 S 37 (JIC) swivel FC7988 ash T Size Thread Size φ FC7988 0404S 7 /6-0 04.50.46.7 0606S 9 /6-8 06.9.78.3 0808S 3 /4-6 08 3.8.70.39 S /6-3.80.0.6 66S 5 /6-6 4.33..8 S 37 (JIC) male flare FC7986 ash Size Thread Size φ FC7986 0404S 7 /6-0 04.34.30.7 0606S 9 /6-8 06.67.54.3 0808S 3 /4-6 08.97.50.39 S /6-3.66.06.6 66S 5 /6-6 4.3.0.8 S male O-Ring boss FC7987 ash T Size Thread Size φ FC7987 0606S 9 /6-8 06.50.37.3 0808S 3 /4-6 08.69..39 S /6-3.40.80.6 66S 5 /6-6 3.78.65.8 R U S B L ll dimensions in inches. Note: For correct socket part number, see page 73. S 00R pressures only. 53

RUSBL LIFSVR* FC7989 ash Tube Size Size Size B* φ FC7989 0404S /4 04.89.5.85.7 0606S 3 /8 06.5.38.0.3 0808S / 08.38.50.9.39 S 3 /4.80.75.0.6 66S 6 3.9.00.06.8 * B dimension is counterbore for mating tubing. S 37 (JIC) swivel 45 elbow FC7990 ash Size Thread Size φ FC7990 0404S 7 /6-0 04.37.33.7.33 0606S 9 /6-8 06.75.6.3.39 0808S 3 /4-6 08 3.4.77.39.55 S /6-4.09.49.6.78 66S 5 /6-6 4.88.75.8.07 S 37 (JIC) swivel 90 elbow (short) FC799 90 elbow (long) FC799 Code 6 S J58 Straight split flange FC5075 Flange ash ead Size ia. Size φ FC5075 0808S.9 08 3.0.54.39 S.50 3.47.87.6 66S.75 6 4.50.38.8 Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79. ORS Swivel Straight FJ974 ash T Size Thread Size φ FJ974 0404S 9 /6-8 04.6.58.6 0606S /6-6 06.95.8.6 0808S 3 /6-6 08 3.38.9.36 S 3 /6-4.00.40.55 66S 7 /6-6 4.64.5.78 ORS Swivel 90 lbow short drop FJ976 T Size Thread Size φ FJ976 0404S 9 /6-8 04.3.8.7.8 0606S /6-6 06.65.5.6.90 0808S 3 /6-6 08 3.0.54.38.5 S 3 /6-4.05.45.6.88 66S 7 /6-6 4.69.57.8. ORS Swivel 90 lbow long drop FJ977 ash T Size Thread Size φ FJ977 0404S 9 /6-8 04.3.8.7.80 0606S /6-6 06.77.64.6.3 0808S 3 /6-6 08 3.3.66.38.5 S 3 /6-4.05.45.6 3.78 66S 7 /6-6 4.69.57.8 4.50 R U S B L ash Size Thread Size φ FC799 0404S 7 /6-0 04.6..7.68 0606S 9 /6-8 06.65.5.3.85 0808S 3 /4-6 08 3.00.54.39.09 S /6-4.05.45.6.8 66S 5 /6-6 4.69.56.8.39 FC799 0404S 7 /6-0 04.6..7.80 0606S 5 /6-8 06.65.5.3.8 0808S 3 /4-6 08 3.3.66.39.43 008S 7 /8-4 08 3.38.9.39.57 S /6-4.05.45.6 3.73 66S 5 /6-6 4.69.56.8 4.58 ORS Swivel 45 lbow FJ975 ash T Size Thread Size φ FJ975 0404S 9 /6-8 04.48.44.7.4 0606S /6-6 06.79.66.6.43 0808S 3 /6-6 08 3.8.8.38.59 S 3 /6-4.5.50.6.83 66S 7 /6-6 4.76.64.8.94 30 swivel-metric threads special Komatsu FJ799 ash Size Thread Size φ FJ799 004S M4x.5 04.7.68.7 0306S M8x.5 06 3.04.90.5 0408S Mx.5 08 3.30.8.37 05S M4x.5 3.86.6.48 06S M30x.5 4.0.4.6 06S M33x.5 6 4.7.59.80 ll dimensions in inches. NOT: For correct socket part number, see page 73. 54

RUSBL for use with FC, G663 (continued) Komatsu split flange FJ77 Flange ash ead Size ia. Size φ FJ77 0S.35 5.0 3.50.58 Komatsu split flange 45 elbow FJ7 Flange ash ead Size ia. Size φ FJ7 0S.35 4.3.7.58.00 Komatsu split flange 90 elbow FJ73 Flange ash ead Size ia. Size φ FJ73 0S.35 4.05.95.58.4 ll dimensions in inches. Komatsu split flange fittings require the use of a special O-Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. i-pac Reusable fittings for use with FC30, FC50 ash Size Thread Size φ FC53 0404S /4-8 04.46.4.7 0406S /4-8 06.75.8.3 0606S 3 /8-8 06.75.8.3 0808S /-4 08 3.09.44.39 S 3 /4-4 3.6.74.6 66S - / 6 4.40.9.8 *00S /4- / 0 5.0.48.05 ash Size Thread Size φ FC530 Male pipe FC53 S 37 (JIC) swivel FC530 0404S 7 /6-0 04.60.38.7 0606S 9 /6-8 06.98.5.3 0806S 3 /4-6 06 3..64.3 0808S 3 /4-6 08 3.0.6.39 008S 7 /8-4 08 3.3.80.39 00S 7 /8-4 0 3.44.83.50 S /6-3.86.99.6 66S 5 /6-6 4.48.37.8 *00S 5 /8-0 5.0.47.05 ash Size Thread Size φ FC533 0404S 7 /6-0 04.44.3.7 0606S 9 /6-8 06.75.7.30 0806S 3 /4-6 06.9.43.3 0808S 3 /4-6 08.99.34.39 008S 7 /8-4 08 3.0.44.39 00S 7 /8-4 0 3..6.48 S /6-3.7.85.6 4S 3 /6-3.76.88.6 66S 5 /6-6 4.38.7.8 *00S 5 /8-0 4.88.47.05 ash Size Thread Size φ FC5379 008S 7 /8-4 08.84.9.39 08S /6-08 3.00.35.39 66S 5 /6-6 3.93.8.8 *00S 5 /8-0 4.38.98.05 ash Size Thread Size φ FC544 S 37 (JIC) male flare FC533 S male o-ring boss FC5379 S 37 (JIC) swivel 45 elbow FC544 0404S 7 /6-0 04.47.5.7.33 0606S 9 /6-8 06.8.35.3.39 0806S 3 /4-6 06 3.7.70.3.55 0808S 3 /4-6 08.6.54.39.55 008S 7 /8-4 08 3.45.66.39.64 00S 7 /8-0 0 3.54.99.50.64 S /6-4.5.8.6.78 66S 5 /6-6 5.03.9.8.07 * 00S 5 /8-0 5.87 3.46.05. R U S B L *FC30 only NOT: For correct socket part number, see page 73. O-Ring not included. See pages 76-79 for O-Rings. 55

RUSBL S 37 (JIC) swivel 90 elbow (short) FC543 S 37 (JIC) swivel 90 elbow (long) FC54 ash Size Thread Size φ FC543 0404S 7 /6-0 04.36.5.7.68 0606S 9 /6-8 06.7.5.3.85 0806S 3 /4-6 06.94.46.3.09 0808S 3 /4-6 08 3.0.38.39.09 008S 7 /8-4 08 3.5.50.39.3 00S 7 /8-4 0 3.8.67.50.3 S /6-4..4.6.8 66S 5 /6-6 4.84.73.8.39 *00S 5 /8-0 5.67 3.7.05.75 FC54 0404S 7 /6-0 04.36.5.7.80 0606S 9 /6-8 06.7.5.3.8 0806S 3 /4-6 06 3.06.59.3.43 0808S 3 /4-6 08 3.5.50.39.43 008S 7 /8-4 08 3.40.75.39.57 00S 7 /8-4 0 3.53.9.50.57 S /6-4..4.6 3.73 66S 5 /6-6 4.84.73.8 4.58 *00S 5 /8-0 5.67 3.7.05 5.53 LIFSVR FC5380 Flange ash ead Size ia. Size φ FC535 0808S.9 08 3.03.38.39 08S.50 08 3.07.4.39 S.50 3.53.66.6 6S.75 3.9.05.6 66S.75 6 4.65.54.8 06S.00 6 4.65.54.8 *00S.00 0 5.3.83.05 Flange ash ead Size ia. Size φ FC536 Code 6 S J58 Straight split flange FC535 Code 6 S J58 / split flange FC536 0808S.9 08 3.76..39.50 S.50 4.3.44.6.50 6S.75 4.3.44.6.50 66S.75 6 4.84.73.8.50 06S.00 6 4.84.73.8.50 *00S.00 0 5.47 3.07.05.50 Flange ash ead Size ia. Size φ FC538 0808S.9 08 3.7.06.39.00 S.50 4.34.47.6.00 6S.75 4.39.5.6.00 66S.75 6 5.09.98.8. 06S.00 6 5.09.98.8. *00S.00 0 5.77 3.37.05. Flange ash ead Size ia. Size φ FC539 Code 6 S J58 45 split flange FC538 Code 6 S J58 60 split flange FC539 S.50 4.5.65.6.6 6S.75 4.5.65.6.6 66S.75 6 5.5 3.04.8.64 06S.00 6 5.5 3.04.8.64 * 00S.00 0 5.88 3.48.05.64 R U S B L ash Tube Size Size Size B φ FC5380 0404S /4 04.99.5.77.7 0606S 3 /8 06..38.75.3 0808S / 08.40.50.75.39 00S 5 /8 0.53.6.9.50 S 3 /4.86.75.99.6 66S 6 3.34.00.3.8 *00S /4 0 3.9.5.5.05 ll dimensions in inches. B dimension is counterbore diameter for mating tubing. NOT: For correct socket part number, see page 73. Flange ash ead Size ia. Size φ FC537 Code 6 S J58 30 split flange FC537 S.50 4.38.5.6.69 6S.75 4.38.5.6.69 66S.75 6 4.6.50.8.50 06S.00 6 4.6.50.8.50 *00S.00 0 6.05 3.65.05.96 Flange ash ead Size ia. Size φ FC540 Code 6 S J58 67 / split flange FC540 0808S.9 08 3.47.8.39.38 S.50 4.37.50.6.6 6S.75 4.37.50.6.6 66S.75 6 5.07.96.8.75 06S.00 6 5.07.96.8.75 *00S.00 0 5.87 3.46.05.88 *FC30 only NOT: For flanges, split flange halves, kits and O-Rings see pages 76-79. 56

RUSBL i-pac Reusable fittings for use with FC30, FC50 Code 6 S J58 90 split flange FC54 Flange ash ead Size ia. Size φ FC54 0808S.9 08 3.5.50.39.6 08S.50 08 3.5.50.39.6 S.50 4..4.6. 6S.75 4..4.6. 66S.75 6 4.84.73.8.38 06S.00 6 4.84.73.8.38 *00S.00 0 5.67 3.6.05.50 ORS Swivel Straight FJ978 ash T Size Thread Size φ FJ978 0404S 9 /6-8 04.7.50.7 0606S /6-6 06 3.0.55.6 0808S 3 /6-6 08 3.40.75.39 00S -4 0 3.6.0.50 S 3 /6-4.05.8.6 66S 7 /6-6 4.78.68.8 00S /6-0 5.30.90.05 NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. NOT: For correct socket part number, see page 73. *FC30 only ORS Swivel 45 lbow FJ979 ash T Size Thread Size φ FJ979 0404S 9 /6-8 04.58.36.5.4 0606S /6-6 06.86.39.4.43 0808S 3 /6-6 08 3.30.65.37.59 00S -4 0 3.6.0.46.65 S 3 /6-4..34.58.83 66S 7 /6-6 4.9.80.76.94 00S /6-0 5.74 3.34.0.00 90 lbow short drop FJ9730 ash T Size Thread Size φ FJ9730 0404S 9 /6-8 04.4..5.8 0606S /6-6 06.7.5.4.90 0808S 3 /6-6 08 3.0.38.37.5 00S -4 0 3.8.67.46.7 S 3 /6-4..4.58.88 66S 7 /6-6 4.84.73.76. 00S /6-0 5.67 3.6.0.5 ORS Swivel 90 lbow long drop FJ973 ash T Size Thread Size φ FJ973 0404S 9 /6 8 04.4..5.80 0606S /6 6 06.85.37.4.3 0808S 3 /6 6 08 3.5.50.37.5 00S 4 0 3.8.67.46.76 S 3 /6 4..4.58 3.78 66S 7 /6 6 4.84.73.76 4.50 00S /6 0 5.67 3.6.0 5.09 30 swivel-metric threads special Komatsu FJ70 ash Size Thread Size φ FJ70 004S M4x.5 04.8.6.7 0306S M8x.5 06 3..64.5 0408S Mx.5 08 3.3.66.37 050S M4x.5 0 3.58.97.50 06S M30x.5 4.08..6 06S M33x.5 6 4.86.76.80 0S M36x.5 0 5.46 3.06.95 Komatsu split flange FJ70 Flange ash ead Size ia. Size φ FJ70 00S.35 0 4.5.9.46 Komatsu split flange 45 elbow FJ703 Flange ash ead Size ia. Size φ FJ703 00S.35 0 3.80.9.46.86 ll dimensions in inches. Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. R U S B L 57

RUSBL R U S B L Komatsu split flange 90 elbow FJ704 Flange ash ead Size ia. Size φ FJ704 00S.35 0 3.53.9.46 3.0 Komatsu split flange fittings require the use of a special O-Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. for use with 59, 766, 78, FC95 Male pipe 47 ash Size Thread Size φ 47 00R Skive Style Reusable fittings 4 4S /4-8 04.50.6.7 6 4S 3 /8-8 04.56.3.7 6 6S 3 /8-8 06.75.8.3 6 8S 3 /8-8 08.84.3.39 8 8S /-4 08 3.09.58.39 8 0S /-4 0 3.8.63.50 S 3 /4-4 3.6.74.6 6 S - / 3.9.06.6 6 6S - / 6 4.40.36.8 0 0S /4- / 0 4.90.59.05 4 4S /- / 4 4.98.74.8 3 3S - / 3 5.50 3.05.75 NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. NOT: For correct socket part number, see page 73. S 00R pressures only. S 37 (JIC) swivel 47 36 stainless steel S 37 (JIC) swivel 59 47 ash Size Thread Size φ 47 4 4S 7 /6-0 04.64.4.7 5 4S /-0 04.7.49.7 6 4S 9 /6-8 04.79.56.7 6 6S 9 /6-8 06.98.5.6 8 6S 3 /4-6 06 3..63.3 8 8S 3 /4-6 08 3.0.68.39 0 8S 7 /8-4 08 3.3.80.39 8S /6-08 3.40.89.39 0S 7 /8-4 0 3.40.85.50 0S /6-0 3.50.94.50 S /6-3.86.99.6 4 S 3 /6-3.94.06.6 6 S 5 /6-4.00.3.6 6S 5 /6-6 4.48.43.8 0S 5 /8-0 5.0.78.05 4S 7 /8-4 5.6.93.8 3S /- 3 5.90 3.47.75 59 47 4 4 7 /6-0 04.64.4.7 6 4 9 /6-8 04.79.56.7 6 6 9 /6-8 06.98.5.6 8 6 3 /4-6 06 3..64.3 8 8 3 /4-6 08 3.0.68.39 0 8 7 /8-4 08 3.3.80.39 0 7 /8-4 0 3.40.85.50 /6-3.86.99.6 6 5 /6-6 4.48.4.8 S male O-Ring boss 90464 ash Size Thread Size φ 90464 8S 3 /4-6 08.7.0.39 0 8S 7 /8-4 08.84.33.39 8S /6-08 3.00.49.39 S /6-3.46.59.6 4 S 3 /6-3.46.59.6 6S 5 /6-6 3.93.87.8 0S 5 /8-0 4.40.07.05 4S 7 /8-4 4.3.07.8 3S /- 3 4.68.3.75 O-Ring not included. See page 78 for O-Rings. S 37 (JIC) male flare 475 ash Size Thread Size φ 475 4 4S 7 /6-0 4.49.5.7 5 4S /-0 4.49.5.7 6 4S 9 /6-8 4.55.33.7 6 6S 9 /6-8 6.75.8.30 8 6S 3 /4-6 6.9.44.3 8 8S 3 /4-6 8.99.48.39 0 8S 7 /8-4 8 3.0.59.39 0S 7 /8-4 0 3.9.64.5 8S /6-8 3.6.75.39 0S /6-0 3.36.8.50 S /6-3.7.85.6 4 S 3 /6 3.76.88.6 6 S 5 /6 3.90.03.6 6S 5 /6-6 4.38.33.8 0S 5 /8 4.89.58.05 4S 7 /8 4 5.06.8.8 LIFSVR* 9000 ash Tube Size Size Size B* φ 9000 4S /4 04.03.5.80.7 6S 3 /8 06..38.75.3 8 6S / 06.3.50.84.3 8S / 08.40.50.89.39 0 8S 5 /8 08.40.6.89.39 0S 5 /8 0.50.6.94.50 S 3 /4.86.75.99.6 6 S.86.00.99.6 6S 6 3.34.00.9.8 0 6S /4 6 3.46.5.4.8 4 6S / 6 3.53.50.48.8 6 0S 0 3.94.00.6.8 0 0S /4 0 3.94.5.6.05 4 0S / 0 4.00.50.68.05 0 4S /4 4 3.9.5.68.05 4S / 4 3.9.50.68.8 3S 3 4.34.00.64.75 * B dimension is counterbore diameter for mating tubing. lso available with metric and jump size counterbores. ll dimensions in inches. 58

RUSBL 00R Skive Style Reusable fittings for use with 59, 766, 78, FC95 S 37 (JIC) swivel 45 elbow 9087 ash Size Thread Size φ 9087 4S 7 /6-0 04.5.8.7.33 6S 9 /6-8 06.8.35.3.39 8 6S 3 /4-6 06 3.7.70.3.55 8S 3 /4-6 08 3.6.75.39.55 0 8S 7 /8-4 08 3.45.94.39.64 0S 7 /8-4 0 3.54.99.50.64 S /6-4.5.8.6.78 6S 5 /6-6 5.03.97.8.07 0S 5 /8-0 5.88 3.56.05. Code 6 S J58 Straight split flange 4744 Flange ash ead Size ia. Size φ 4744 8S.9 08 3.03.5.39 8S.50 08 3.07.56.39 S.50 3.53.66.6 6 S.75 3.9.05.6 6S.75 6 4.65.59.8 0 6S.00 6 4.65.60.8 4 6S.38 6 4.7.66.8 6 0S.75 0 5.6 3.9.8 0S.00 0 5.5.93.05 4 0S.38 0 5.5.93.05 4S.38 4 5.5 3.7.8 0 4S.00 4 5..99.05 3 4S.8 4 5.5 3.7.8 3S.8 3 6.37 3.93.75 Code 6 S J58 30 split flange 9044 Flange ash ead Size ia. Size φ 9044 S.50 4.38.5.6.69 6 S.75 4.38.5.6.69 0 S.00 4.38.5.6.69 6S.75 6 4.6.56.8.50 0 6S.00 6 4.6.56.8.50 6 0S.75 0 6.06 3.74.05.96 0S.00 0 6.06 3.74.05.96 4 0S.38 0 6.06 3.74.05.96 3 0S.8 0 6. 3.80.05.99 0 4S.00 4 6.04 3.8.05.96 4S.38 4 5.45 3..8.58 3 4S.8 4 5.45 3..8.58 3S.8 3 6.3 3.69.75.65 ash Size Thread Size φ 9064 4S 7 /6-0 04.40.7.68 6S 9 /6-8 06.7.5.85 8 6S 3 /4-6 06.94.46.3.09 8S 3 /4-6 08 3.0.5.09 0 8S 7 /8-4 08 3.5.64.39.3 0S 7 /8-4 0 3.4.69.3 S /6-4..4.8 6S 5 /6-6 4.84.79.8.39 0S 5 /8-0 5.68 3.36.05.75 9063 S 37 (JIC) swivel 90 elbow (short) 9064 S 37 (JIC) swivel 90 elbow (long) 9063 4S 7 /6-0 04.40.7.7.80 6S 9 /6-8 06.7.5.3.8 8 6S 3 /4-6 06 3.06.59.3.43 8S 3 /4-6 08 3.5.64.39.43 0 8S 7 /8-4 08 3.40.89.39.57 0S 7 /8-4 0 3.50.94.50.57 S /6-4..4.6 3.73 6S 5 /6-6 4.84.78.8 4.58 0S 5 /8-0 5.68 3.36.05 5.53 Code 6 S J58 / split flange 470 Flange ash ead Size ia. Size φ 470 8S.9 08 3.76.5.39.50 S.50 4..44.6.50 6 S.75 4.3.44.6.50 6S.75 6 4.84.79.8.50 0 6S.00 6 4.84.79.8.50 0S.00 0 5.49 3.7.05.50 4S.38 4 5.5 3.8.8.50 3S.8 3 6.04 3.60.75.50 ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. NOT: For socket part numbers, see page 73. Code 6 S J58 45 split flange 4745 Flange ash ead Size ia. Size φ 4745 8S.9 08 3.7.0.39.00 8S.50 08 3.7.0.39.00 6 0S.75 0 3.9.35.50.00 S.50 4.34.47.6.00 6 S.75 4.39.5.6.00 0 S.00 4.38.5.6.00 4 S.38 4.45.56.6.05 3 S.8 4.37.50.6.99 6S.75 6 5.09 3.04.8. 0 6S.00 6 5.09 3.04.8. 4 6S.38 6 5.3 3.08.8.7 6 0S.75 0 5.68 3.36.8. 0S.00 0 5.78 3.46.05. 4 0S.38 0 5.78 3.46.05. 3 0S.8 0 5.83 3.5.05.7 0 4S.00 4 5.76 3.53.05. 4S.38 4 5.87 3.63.8. 3 4S.8 4 5.86 3.63.8. 3S.8 3 6.63 4.9.75.5 40 3S 3.3 3 6.67 4.3.75.30 R U S B L 59

RUSBL R U S B L Code 6 S J58 67 / split flange 4767 Flange ash ead Size ia. Size φ 4767 8S.9 08 3.47.96.39.38 S.50 4.37.50.6.6 6 S.75 4.37.50.6.6 6S.75 6 5.07 3.0.8.75 0 6S.00 6 5.07 3.0.8.75 0S.00 0 5.88 3.56.05.88 4S.38 4 6.08 3.84.8.00 3S.8 3 6.94 4.50.75.5 Code 6 S J58 90 split flange 4790 Flange ash ead Size ia. Size φ 4790 8S.9 08 3.5.64.39.6 8S.50 08 3.5.64.39.6 6 8S.75 08 3.5.64.39.78 0S.50 0 3.50.94.50.03 6 0S.75 0 3.50.94.50. 8 S.9 3.6.74.37.6 S.50 4..4.6. 6 S.75 4..4.6. 0 S.00 4..4.6. 4 S.38 4..4.6. 6S.50 6 4.59.54.8. 6S.75 6 4.84.79.8.38 0 6S.00 6 4.84.79.8.38 4 6S.38 6 4.84.79.8.44 3 6S.8 6 4.84.79.8.34 6 0S.75 0 5.44 3..8.38 0S.00 0 5.68 3.36.05.50 4 0S.38 0 5.68 3.36.05.50 3 0S.8 0 5.68 3.36.05.56 0 4S.00 4 5.66 3.4.05.50 4S.38 4 5.9 3.68.8.75 3 4S.8 4 5.9 3.68.8.75 3S.8 3 6.84 4.40.75 3.5 40 3S 3.3 3 6.84 4.40.75 3.3 ash T Size Thread Size φ FJ973 0404S 9 /6-8 04.75.5.7 0606S /6-6 06 3.0.55.6 0808S 3 /6-6 08 3.40.89.39 00S -4 0 3.58.03.50 S 3 /6-4.05.8.6 66S 7 /6-6 4.78.73.8 00S /6-0 5.3 3.00.05 44S - 4 5.35 3..6 ash T Size Thread Size φ FJ9733 ORS Swivel Straight FJ973 ORS Swivel 45 elbow FJ9733 0404S 9 /6-8 04.6.39.5.4 0606S /6-6 06.86.39.4.43 0808S 3 /6-6 08 3.30.79.37.59 00S -4 0 3.59.03.46.65 S 3 /6-4..34.58.83 66S 7 /6-6 4.9.85.76.94 00S /6-0 5.76 3.44.0.00 44S - 4 5.8 3.58.6.07 ash T Size Thread Size φ FJ9734 0404S 9 /6-8 04.47.3.5.8 0606S /6-6 06.7.5.4.90 0808S 3 /6-6 08 3.0.5.37.5 00S -4 0 3.4.69.46.7 S 3 /6-4..4.58.88 66S 7 /6-6 4.84.78.76. 00S /6-0 5.68 3.36.0.5 44S - 4 5.9 3.68.6.70 ash T Size Thread Size φ FJ9735 ORS Swivel 90 elbow short drop FJ9734 ORS Swivel 90 elbow long drop FJ9735 0404S 9 /6-8 04.6.39.5.80 0606S /6-6 06.85.37.4.3 0808S 3 /6-6 08 3.5.64.37.5 00S -4 0 3.4.69.46.76 S 3 /6-4..4.58 3.78 66S 7 /6-6 4.84.78.76 4.50 00S /6-0 5.68 3.36.0 5.09 44S - 4 5.9 3.68.6 5.54 ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. NOT: For socket part numbers, see page 73. 60

RUSBL BSP 00R Skive Style Reusable fittings for use with 59, 766, 78, FC95 BSP male 07.00 ash Size Thread Size φ 07.00 4 4 /4-9 04 6 6 3 /8-9 06 8 8 /-4 08 0 0 5 /8-4 0 0 3 /4-4 0 3 /4-4 6-6 6-6 0 0 /4-0 4 4 /- 4 3 3-3.46..6 6.5 3 4.0.7.4.3 69 3.5 8.0.87.36.39 73 34.5 0.0 3.09.54.5 78.5 39 3.0 3.3.57.5 79.5 40 3.0 3.50.63.6 89 4.5 5.5 3.64.77.6 9.5 45 5.5 4..07.8 04.5 5.5 0.5 4.59.6.04 6.5 57.5 6.5 4.55.30.8 5.5 58.5 3.5 5.4.70.75 30.5 68.5 44.5 BSP female swivel 07.40 ash Size Thread Size φ 07.40 4 4 /4-9 04 6 6 3 /8-9 06 8 6 /-4 06 8 8 /-4 08.7.48.6 69 37.5 4.0.97.50.3 75.5 38 8.0 3.03.56.3 77 39.5 8.0 3..59.39 79 40.5 0.0 (Continued next column) BSP female swivel 07.40 (continued) ash Size Thread Size φ 07.40 0 8 5 /8-4 08 0 0 5 /8-4 0 0 3 /4-4 0 3 /4-4 6-6 6-6 0 6 /4-6 0 0 /4-0 4 4 /- 4 3 3-3 3.7.65.39 80.5 4 0.0 3.7.7.5 83 43.5 3.0 3.33.77.5 84.5 45 3.0 3.70.83.6 94 46.5 5.5 3.90.03.6 99 5.5 5.5 4.37.3.8 59 0.5 4.4.36.8 60 0.5 4.88.56.04 4 65 6.5 4.9.70.8 5 68.5 3.5 5.43 3.00.75 38 76. 44.5 Metric male 60 IN 763/7647 07.078 ash Size Thread Size φ 07.078 4 4 6 4 8 6 Metric 00R Skive Style Reusable fittings for use with 59, 766, 78, FC95 0 6 3 8 6 0 0 5 6 3 0 40 4 50 3 M.40.6.6 04 x.5 6 9.5 4.0 M4.40.6.6 04 x.5 6 9.5 4.0 M6.60..3 06 x.5 66 8.5 8.0 M8.60..3 06 x.5 66 8.5 8.0 M.76.4.39 08 x.5 70 3.5 0.0 M6.85.30.5 0 x.5 7.5 33 3.0 M30 3.3.44.6 x.5 84 36.5 5.5 M38 3.86.8.8 6 x.5 98 46 0.5 M45 4.33.0.04 0 x.5 0 5 6.5 M5 4.33.09.8 4 x.5 0 53 3.5 M65 4.80.36.75 3 x 60 44.5 Metric male 4 IN 390/390 l.rh. 07.03 ash Size Thread Size φ Rφ* 07.03 6 4 8 4 0 6 6 5 8 8 0 8 6 35 0 4 4 M.40.6.6.4 04 x.5 6 9.5 4.0 6 M4.40.6.6.3 04 x.5 6 9.5 4.0 8 M6.64.6.3.39 06 x.5 67 9.5 8.0 0 M8.64.6.3.47 06 x.5 77 9.5 8.0 M.76.4.39.59 08 x.5 70 3.5 0.0 5 M6.85.30.5.7 0 x.5 7.5 33 3.0 8 M30 3.39.5.6.87 x 86 38.5 5.5 M36 3.86.8.8.0 6 x 98 46 0.5 8 M45 4.4.09.04.38 0 x 53 6.5 35 M5 4.4.7.8.65 4 x 55 3.5 4 Metric male 4 IN 390/390 s.rh. 07.005 ash Size Thread Size φ Rφ* 07.005 8 4 0 4 6 4 6 6 8 0 0 5 30 6 38 0 M6.48.4.6.3 04 x.5 63 3.5 4.0 8 M8.48.4.6.39 04 x.5 63 3.5 4.0 0 M0.68.0.3.47 06 x.5 68 30.5 8.0 M.76.8.3.55 06 x.5 70 3.5 8.0 4 M4.83.3.39.63 08 x.5 7 33.5 0.0 6 M30 3.09.54.5.79 0 x 78.5 39 3.0 0 M36 3.54.67.6.98 x 90 4.5 5.5 5 M4 4.09.05.8.8 6 x 04 5 0.5 30 M5 4.7.3.04.50 0 x 0 59 6.5 38 R U S B L inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page 73. 6

RUSBL Metric universal female swivel 60 IN 763/7647 07.37 /07.357 ash Size Thread Size φ 07.37 4 4 6 4 8 6 0 6 3 8 6 8 6 0 07.357 0 5 6 3 0 40 4 50 3 M.64.40.6 04 x.5 67 35.5 4.0 M4.64.40.6 04 x.5 67 35.5 4.0 M6.89.4.3 06 x.5 73.5 36 8.0 M8.89.4.3 06 x.5 73.5 36 8.0 M 3.05.54.39 08 x.5 77.5 39 0.0 M6 3.7.65.39 08 x.5 80.5 4 0.0 M6 3.7.7.5 0 x.5 83 43.5 3.0 M30 3.68.8.6 x.5 93.5 46 5.5 M38 4.5.0.8 6 x.5 08 56 0.5 M45 4.80.48.04 0 x.5 63 6.5 M5 4.70.46.8 4 x.5 9.5 6.5 3.5 M65 5.6.8.75 3 x 33.5 7.5 44.5 Metric universal female swivel 4 IN 390/390 s.rh. 07.39 ash Size Thread Size φ Rφ* 07.39 8 4 0 4 6 4 6 6 8 0 0 0 5 30 6 38 0 M6.70.46.6.3 04 x.5 68.5 37 4.0 8 M8.70.46.6.39 04 x.5 68.5 37 4.0 0 M0.97.50.3.47 06 x.5 75.5 38 8.0 M.97.50.3.55 06 x.5 75.5 38 8.0 4 M4 3.3.6.39.63 08 x.5 79.5 4 0.0 6 M30 3.37.8.5.79 0 x 85.5 46 3.0 0 M30 3.74.87.6.79 x 95 47.5 5.5 0 M36 3.78.9.6.98 x 96 48.5 5.5 5 M4 4.9.4.8.8 6 x 09 57 0.5 30 M5 4.80.48.04.50 0 x 63 6.5 38 Komatsu split flange FJ9066 ash Flange Size ead ia. Size φ FJ9066 00S.35 0 4.48.93.46 Komatsu split flange 45 elbow FJ9065 ash Flange Size ead ia. Size φ FJ9065 00S.35 0 3.77..46.86 Komatsu split flange 90 elbow FJ9064 ash Flange Size ead ia. Size φ FJ9064 00S.35 0 3.50.94.46.0 Metric universal female swivel 4 IN 390/390 l.rh. 07.37 R U S B L ash Size Thread Size φ Rφ* 07.37 4 4 M.64.40.6.4 04 x.5 67 35.5 4.0 6 6 4 M4.64.40.6.3 04 x.5 67 35.5 4.0 8 8 6 M6.89.4.3.39 06 x.5 73.5 36 8.0 0 0 6 M8.89.4.3.47 06 x.5 73.5 36 8.0 3 8 M 3.05.54.39.59 08 x.5 77.5 39 0.0 5 6 8 M6 3.7.65.39.7 08 x.5 80.5 4 0.0 8 6 0 M6 3.7.7.5.7 0 x.5 83 43.5 3.0 8 M30 3.74.87.6.87 x 95 47.5 5.5 8 6 M36 4.7..8.0 6 x 08.5 56.5 0.5 8 35 0 M45 4.78.46.04.38 0 x.5 6.5 6.5 35 4 4 M5 4.80.56.8.65 4 x 65 3.5 4 inches in bold type millimeters in light type 30 swivel metric threads special Komatsu FC543 ash Size Thread Size φ FC543 004S M4 x.5 04.86.63.7 0306S M8 x.5 06 3..64.5 0408S M x.5 08 3.3.80.37 050S M4 x.5 0 3.55.00.50 06S M30 x.5 4.08..6 06S M33 x.5 6 4.87.8.8 0S M36 x.5 0 5.48 3.5.95 44S M4 x.5 4 5.5 3.9.9 *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. Consult eroquip catalogs for part numbers and dimensions. ll dimensions in inches. NOT: For socket part numbers, see page 73. 6

RUSBL for use with FC, G793 Male pipe FC5985 ash Size Thread Size φ FC5985 0404S /4-8 04.50.33.7 0606S 3 /8-8 06.75.4.3 0608S 3 /8-8 08.84.3.39 0808S /-4 08 3.09.58.39 S 3 /4-4 3.6.74.6 66S - / 6 4.40.35.8 S 37 (JIC) swivel FC5988 ash Size Thread Size φ FC5988 0404S 7 /6-0 04.64.47.7 0606S 9 /6-8 06.98.64.3 0808S 3 /4-6 08 3.0.68.39 S /6-3.86.99.6 66S 5 /6-6 4.48.43.8 S 37 (JIC) male flare FC5986 ash Size Thread Size φ FC5986 00R TTC Reusable fittings 0404S 7 /6-0 04.49.3.7 0606S 9 /6-8 06.75.4.30 0808S 3 /4-6 08.99.48.39 S /6-3.7.85.6 66S 5 /6-6 4.38.33.8 S male O-Ring boss** FC5987 ash Size Thread Size φ FC5987 0606S 9 /6-8 06.58.4.3 0806S 3 /4-6 06.63.9.3 0808S 3 /4-6 08.7.0.39 S /6-3.46.59.6 66S 5 /6-6 3.93.88.8 LIFSVR* FC5989 ash Tube Size Size Size B* φ FC5989 0404S /4 04.03.5.86.7 0606S 3 /8 06..38.88.3 0808S / 08.40.50.89.39 S 3 /4.86.75.99.6 66S 6 3.34.00.9.8 lso available with metric and jump size counterbores. S 37 (JIC) swivel 45 elbow FC5990 ash Size Thread Size φ FC5990 0404S 7 /6-0 04.5.34.7.33 0606S 9 /6-8 06.8.48.3.39 0808S 3 /4-6 08 3.6.75.39.55 S /6-4.5.8.6.78 66S 5 /6-6 5.03.98.8.07 S 37 (JIC) swivel 90 elbow (short) FC599 S 37 (JIC) swivel 90 elbow (long) FC599 ash Size Thread Size φ FC599 0404S 7 /6-0 04.40.3.7.68 0606S 9 /6-8 06.7.38.3.85 0808S 3 /4-6 08 3.0.5.39.09 S /6-4..4.6.8 66S 5 /6-6 4.84.79.8.39 FC599 0404S 7 /6-0 04.40.3.7.80 0606S 9 /6-8 06.7.38.3.8 0808S 3 /4-6 08 3.5.64.39.43 S /6-4..4.6 3.73 66S 5 /6-6 4.84.79.8 4.58 Code 6 S J58 Straight split flange FC5993 Flange ash ead Size ia. Size φ FC5993 0808S.9 08 3.03.5.39 S.50 3.53.66.6 66S.75 6 4.65.60.8 R U S B L NOT: For correct socket part number, see page 73. ll dimensions in inches. S 00R pressures only. *B dimension is counterbore diameter for mating tubing. **See page 78 for O-Rings. NOT: For flanges, split flange halves, kits and O-Rings, see pages 76-79. 63

RUSBL ORS Swivel Straight FJ7344 ash T Size Thread Size φ FJ7344 0404S 9 /6-8 04.76.59.6 0606S /6-6 06 3.03.69.6 0808S 3 /6-6 08 3.40.89.36 S 3 /6-4.06.36.55 66S 7 /6-6 4.79.74.78 ORS Swivel 45 elbow FJ7345 ash T Size Thread Size φ FJ7345 0404S 9 /6-8 04.6.45.7.4 0606S /6-6 06.87.53.6.43 0808S 3 /6-6 08 3.30.79.38.59 S 3 /6-4..34.6.83 66S 7 /6-6 4.9.86.8.94 ORS Swivel 90 elbow long drop FJ7347 ash T Size Thread Size φ FJ7347 0404S 9 /6-8 04.47.30.7.80 0606S /6-6 06.85.5.6.3 0808S 3 /6-6 08 3.5.64.38.5 S 3 /6-4..4.6 3.78 66S 7 /6-6 4.84.79.8 4.50 30 swivel-metric threads special Komatsu FJ700 ash Size Thread Size φ FJ700 004S M4x.5 04.87.70.7 0306S M8x.5 06 3..77.5 0408S Mx.5 08 3.3.80.37 05S M4x.5 3.9.06.48 06S M30x.5 4.08..6 06S M33x.5 6 4.86.8.80 Komatsu split flange 45 elbow FJ78 Flange ash ead Size ia. Size φ FJ78 0S.35 4.38.5.58.00 Komatsu split flange 90 elbow FJ79 Flange ash ead Size ia. Size φ FJ79 0S.35 4..4.58.4 Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. ORS Swivel 90 elbow short drop FJ7346 R U S B L ash T Size Thread Size φ FJ7346 0404S 9 /6-8 04.47.30.7.8 0606S /6-6 06.7.38.6.90 0808S 3 /6-6 08 3.03.5.38.5 S 3 /6-4..4.6.88 66S 7 /6-6 4.84.79.8. Komatsu split flange FJ7 Flange ash ead Size ia. Size φ FJ7 0S.35 5.6 3.9.58 ll dimensions in inches. NOT: For socket part number, see page 73. 64

RUSBL for use with FC36, FC34 ( 08), G493, FC736 ash Size Thread Size φ 90934 4 6S /4-8 06 3.07.45.30 6 6S 3 /8-8 06 3.07.45.30 6 8S 3 /8-8 08.84.33.39 8 8S /-4 08 3.09.58.39 S 3 /4-4 3.6.74.6 6 6S - / 6 4.40.35.8 FC7640 ash Size Thread Size φ 90933 6 6S 9 /6-8 06 3.30.68.30 8 6S 3 /4-6 06 3.43.8.30 8 8S 3 /4-6 08 3.0.68.39 0 8S 7 /8-4 08 3.3.80.39 S /6-3.86.99.6 6S 5 /6-6 4.48.43.8 FC7639 Spiral Skive Style Reusable fittings Male pipe 90934 /FC7640 00S /4- / 0 5.44.44.05 44S /- / 4 5.76.8.8 S 37 (JIC) swivel 90933 /FC7639 00S 5 /8-0 5.64.64.05 44S 7 /8-4 6.08 3.3.8 ash Size Thread Size φ 9099 8 8S 3 /4-6 08.99.48.39 0 8S 7 /8-4 08 3.0.58.39 S /6-3.7.85.6 6S 5 /6-6 4.38.33.8 FC7740 00S 5 /8-0 5.43.43.05 44S 7 /8-4 5.85.90.8 ash Size Thread Size φ FC5978 0808S 3 /4-6 08 4.03.5.39.47 S /6-4.7.85.6.5 66S 5 /6-6 5.79 3.74.8.69 FC5979 S 37 (JIC) male flare 9099 /FC7740 S 37 (JIC) swivel / elbow FC5978 /FC5979 00S 5 /8-0 7.3 4.3.05.80 44S 7 /8-4 8.3 5.37.8.95 ash Size Thread Size φ FC5980 0808S 3 /4-6 08 3.98.47.39.6 S /6-4.65.78.6.69 66S 5 /6-6 5.86 3.80.8.95 FC598 ash Size Thread Size φ FC598 0808S 3 /4-6 08 3.95.44.39.95 S /6-4.87 3.00.6.6 66S 5 /6-6 6.00 3.94.8.53 FC5983 00S 5 /8-0 7.4 4.4.05.70 44S 7 /8-4 8.38 5.43.8.99 ash Size Thread Size φ FC5984 0808S 3 /4-6 08 3.84.33.39.6 S /6-4.85.98.6.60 66S 5 /6-6 5.90 3.84.8.08 FJ904 S 37 (JIC) swivel 30 elbow FC5980 /FC598 00S 5 /8-0 7.46 4.46.05. 44S 7 /8-4 8.39 5.44.8.9 S 37 (JIC) swivel 45 elbow FC598 /FC5983 S 37 (JIC) swivel 60 elbow FC5984 /FJ904 00S 5 /8-0 7.36 4.36.05.33 44S 7 /8-4 8.7 5.3.8.7 R U S B L ll dimensions in inches. NOT: For socket part numbers, see page 73. 65

RUSBL R U S B L ash Size Thread Size φ FJ905 0808S 3 /4-6 08 3.86.35.39.47 S /6-4.78.9.6.80 66S 5 /6-6 5.84 3.78.8.36 FJ906 ash Size Thread Size φ FJ907 0808S 3 /4-6 08 3.5.0.39.87 S /6-4.43.56.6.35 66S 5 /6-6 5.34 3.8.8 3.04 FJ908 S 37 (JIC) swivel 67 / elbow FJ905 /FJ906 00S 5 /8-0 7.4 4.4.05.6 44S 7 /8-4 7.70 4.75.8.76 S 37 (JIC) swivel 90 elbow FJ907 /FJ908 00S 5 /8-0 6.7 3.7.05 3.40 44S 7 /8-4 7.5 4.56.8 3.95 Straight split flange 90935 /FC773 Code 6 S J58 FC7370 /FC5973 Code 6 S J58 Flange ash ead Size ia. Size φ 90935 Code 6 (S J58) 8S.9 08 4.05.54.37 8S.50 08 4.05.54.37 S.50 4.79.9.56 6 S.75 4.79.9.56 6S.75 6 5.69 3.63.8 0 6S.00 6 5.69 3.63.8 (Continued next column) NOT: For socket part numbers, see page 73. Straight split flange (continued) 90935 /FC773 Code 6 S J58 FC7370 /FC5973 Code 6 S J58 Flange ash ead Size ia. Size φ FC773 00S.00 0 6.86 3.86.05 40S.38 0 6.86 3.86.05 44S.38 4 7.86 4.90.8 34S.8 4 7.86 4.90.8 FC7370 Code 6 (S J58) 08S.6 08 4.05.54.37 S.6 4.79.9.56 6S.88 4.79.9.56 66S.88 6 5.69 3.63.8 06S. 6 5.69 3.63.8 FC5973 00S. 0 6.86 3.85.05 40S.50 0 6.86 3.85.05 44S.50 4 7.86 4.90.8 34S 3. 4 7.86 4.90.8 / split flange FC9634 /FC774 Code 6 S J58 FC7983 /FC5974 Code 6 S J58 Flange ash ead Size ia. Size φ FC9634 Code 6 (S J58) 0808S.9 08 3.8.30.39.38 08S.50 08 3.8.30.39.38 S.50 4.5.64.6.44 6S.75 4.5.64.6.44 66S.75 6 5.8 3..8.44 06S.00 6 5.8 3..8.44 FC774 00S.00 0 6.6 3.6.05.50 40S.38 0 6.6 3.6.05.50 44S.38 4 7.56 4.6.8.63 34S.8 4 7.56 4.6.8.63 FC7983 Code 6 (S J58) 08S.6 08 3.8.30.39.38 S.6 4.5.64.6.44 6S.88 4.5.64.6.44 66S.88 6 5.8 3..8.44 06S. 6 5.8 3..8.44 FC5974 00S. 0 6.6 3.6.05.50 40S.50 0 6.6 3.6.05.50 44S.50 4 7.56 4.6.8.63 34S 3. 4 7.56 4.6.8.63 NOT: For flanges, split flange halves, kits and O Rings, see pages 76-79. 30 split flange FC9459 /FC7790 Code 6 S J58 FC737 /FC5975 Code 6 S J58 Flange ash ead Size ia. Size ø FC9459 Code 6 (S J58) 0808S.9 08 3.77.6.39.50 08S.50 08 3.77.6.39.50 S.50 4.46.59.6.58 6S.75 4.46.59.6.58 66S.75 6 5.8 3..8.6 06S.00 6 5.8 3..8.6 FC7790 00S.00 0 6.78 3.78.05.7 40S.38 0 6.78 3.78.05.7 44S.38 4 7.68 4.73.8.88 34S.8 4 7.68 4.73.8.88 FC737 Code 6 (S J58) 08S.6 08 3.77.6.39.50 S.6 4.46.59.6.58 6S.88 4.46.59.6.58 66S.88 6 5.8 3..8.6 06S. 6 5.8 3..8.6 FC5975 00S. 0 6.78 3.78.05.7 40S.50 0 6.78 3.78.05.7 44S.50 4 7.68 4.73.8.88 34S 3. 4 7.68 4.73.8.88 NOT: For correct socket part number, see page 7. NOT: For flanges, split flange halves, kits and O Rings, see pages 76-79. ll dimensions in inches. 66

RUSBL Spiral Skive Style Reusable fittings for use with FC36, G493, FC736, FC34 (-08) 45 split flange 90936 /FC775 Code 6 S J58 FC737 /FC5976 Code 6 S J58 Flange ash ead Size ia. Size ø 90936 Code 6 (S J58) 8S.9 08 3.78.7.37.78 8S.50 08 3.78.7.37.78 S.50 4.7.84.56.00 6 S.75 4.7.84.56.00 6S.75 6 5.53 3.47.8.06 0 6S.00 6 5.53 3.47.8.06 FC775 60S.75 0 6.66 3.66.8.06 00S.00 0 6.87 3.87.05.5 40S.38 0 6.87 3.87.05.5 44S.38 4 7.79 4.84.8.4 34S.8 4 7.79 4.84.8.4 FC737 Code 6 (S J58) 0808S.5 08 3.78.7.37.78 08S.6 08 3.78.7.39.78 S.6 4.7.84.6.00 6S.88 4.7.84.6.00 66S.88 6 5.53 3.47.8.06 06S. 6 5.53 3.47.8.06 FC5976 00S. 0 6.87 3.87.05.5 40S.50 0 6.87 3.87.05.5 44S.50 4 7.79 4.84.8.4 34S 3. 4 7.79 4.84.8.4 60 split flange FC9066 /FC5060 Code 6 S J58 FC7373 /FC5977 Code 6 S J58 Flange ash ead Size ia. Size ø FC9066 Code 6 (S J58) 0808S.9 08 3.7..39.05 08S.50 08 3.7..39.05 S.50 4.74.87.6.4 6S.75 4.74.87.6.4 66S.75 6 5.56 3.50.8.50 06S.00 6 5.56 3.50.8.50 (Continued next column) 60 split flange (continued) Flange ash ead Size ia. Size ø FC5060 00S.00 0 6.97 3.97.05.66 40S.38 0 6.97 3.97.05.66 04S.00 4 7.7 4.3.05.66 44S.38 4 7.85 4.90.8.00 34S.8 4 7.85 4.90.8.00 FC7373 Code 6 (S J58) 08S.6 08 3.7..39.05 S.6 4.74.87.6.4 6S.88 4.74.87.6.4 66S.88 6 5.56 3.50.8.50 06S. 6 5.56 3.50.8.50 FC5977 00S. 0 6.97 3.97.05.66 40S.50 0 6.97 3.97.05.66 44S.50 4 7.85 4.90.8.00 34S 3. 4 7.85 4.90.8.00 67 / split flange FC98 /FC78 Code 6 S J58 FC7984 /FJ9034 Code 6 S J58 Flange ash ead Size ia. Size ø FC98 Code 6 (S J58) 0808S.9 08 3.77.6.39.5 08S.50 08 3.77.6.39.5 S.50 4.69.8.6.60 6S.75 4.69.8.6.60 66S.75 6 5.58 3.53.8.75 06S.00 6 5.58 3.53.8.75 FC78 00S.00 0 6.94 3.94.05.90 40S.38 0 6.94 3.94.05.90 44S.38 4 7.38 4.43.8.00 34S.8 4 7.38 4.43.8.00 FC7984 Code 6 (S J58) 08S.6 08 3.77.6.39.5 S.6 4.69.8.6.60 6S.88 4.69.8.6.60 66S.88 6 5.58 3.53.8.75 06S. 6 5.58 3.53.8.75 FC9034 00S. 0 6.94 3.94.05.90 40S.50 0 6.94 3.94.05.90 44S.50 4 7.38 4.43.8.00 34S 3. 4 7.38 4.43.8.00 90 split flange 90937 /FC7703 Code 6 S J58 FC7374 /FJ9033 Code 6 S J58 Flange ash ead Size ia. Size ø 90937 Code 6 (S J58) 8S.9 08 3.5.0.39.6 8S.50 08 3.5.0.39.6 S.50 4.43.56.6.3 6 S.75 4.43.56.6.3 0 S.00 4.43.56.6.3 6S.75 6 5.34 3.8.8.38 0 6S.00 6 5.34 3.8.8.38 4 6S.38 6 5.34 3.8.8.38 FC7703 00S.00 0 6.7 3.7.05.6 40S.38 0 6.7 3.7.05.6 44S.38 4 7.5 4.56.8 3. 34S.8 4 7.5 4.56.8 3. FC7374 Code 6 (S J58) 0808S.5 08 3.5.0.39.6 08S.6 08 3.5.0.39.6 S.6 4.43.56.6.3 6S.88 4.43.56.6.3 66S.88 6 5.34 3.8.8.38 06S. 6 5.34 3.8.8.8 FJ9033 00S. 0 6.7 3.7.05.6 40S.50 0 6.7 3.7.05.6 44S.50 4 7.5 4.56.8 3. 34S 3. 4 7.5 4.56.8 3. R U S B L NOT: For correct socket part number, see page 73. NOT: For flanges, split flange halves, kits and O Rings, see pages 76-79. ll dimensions in inches. 67

RUSBL ORS Swivel Straight FJ9740 /FJ9744 ash T Size Thread Size ø FJ9740 0606S /6-6 06 3.35.7.6 0808S 3 /6-6 08 3.40.89.39 S 3 /6-4.05.8.6 66S 7 /6-6 4.78.66.8 FJ9744 00S /6-0 5.85.85.05 44S - 4 6.4 3.0.6 ORS Swivel 45 elbow FJ974 /FJ9745 ash T Size Thread Size ø FJ974 0808S 3 /6-6 08 3.54.0.37.59 S 3 /6-4.53.66.56.83 66S 7 /6-6 5.53 3.47.8.94 FJ9745 00S /6-0 6.58 3.58.0.00 ORS Swivel 90 elbow short drop FJ974 /FJ9746 ash T Size Thread Size ø FJ974 0808S 3 /6-6 08 3.30.79.37.5 S 3 /6-4.43.56.56.88 66S 7 /6-6 5.4 3.8.8. FJ9746 00S /6-0 6.66 3.66.0.5 44S - 4 7.5 4.56.9.70 ORS Swivel 90 elbow long drop FJ9743 /FJ9747 ash T Size Thread Size ø FJ9743 0808S 3 /6-6 08 3.5.0.37.5 S 3 /6-4.43.56.56 3.78 66S 7 /6-6 5.34 3.8.8 4.50 FJ9747 00S /6-0 6.7 3.7.0 5.09 44S 4 7.5 4.56.9 5.54 Komatsu 30 Swivel-Metric Threads FJ786 ash Size Thread Size φ FJ786 0408S M x.5 08 3.3.66.37 05S M4 x.5 3.9.06.48 06S M30 x.5 4.08..6 06S M33 x.5 6 4.86.76.80 SOCKTLSS for use with 556, 565, 575, FC33, FC647 Male pipe 4738 ash Size Thread Size φ 4738 4B /8-7 04.40.65.7 4 4B /4-8 04.58.83.7 4 6B /4-8 06.76.89.30 6 6B 3 /8-8 06.76.89.30 6 8B 3 /8-8 08.9.89.39 8 8B /-4 08.6.4.39 8 0B /-4 0.68.4.48 B 3 /4-4.7..6 R U S B L ll dimensions in inches. NOT: For correct socket part number, see page 73. 68

RUSBL Male pipe swivel FJ9068 /FJ9486 **Uses Neoprene O-Ring ash Size Thread Size φ FJ9068 0404S /4-8 04.9.43.7 0606S 3 /8-8 06.30.43.30 0808S /-4 08.70.69.39 FJ9486 004B /8-7 04.70.94. **Use only with petroleum and waterglycol fluids. Female pipe 4753 ash Size Thread Size φ 4753 4 4B /4-8 04.5.77.7 6 6B 3 /8-8 06.70.83.30 8 8B /-4 08.03.0.39 ash Size Thread Size φ 4797 4B 7 /6-0 04.46.7.7 5 4B /-0 04.5.77.7 8 6B 3 /4-6 06.79.93.30 8B 3 /4-6 08.95.93.39 0 8B 7 /8-4 08.07.06.39 0B 7 /8-4 0.60.06.48 4739 6B* 5 /8-8 06.67.8.30 B* /6-4.7.9.6 474 4797 Universal 4739 S 45 * 474 S 37 (JIC) 3 4B 3 /8-4 04.44.69. 6 4B 9 /6-8 04.56.8.7 5 6B /-0 06.66.80.3 6B 9 /6-8 06.67.80.30 B /6-.7.9.6 S 45 male flare 474 ash Size Thread Size φ 474 4B 7 /6-0 04.58.83.7 5 4B /-0 04.64.89.7 6B 5 /8-8 06.8.95.8 8B 3 /4-6 08.0.08.39 S 45 inverted male flare 4740 ash Size Thread Size φ 4740 3 4B 3 /8-4 04.50.75.3 4B 7 /6-4 04.50.75.7 5 4B /-0 04.58.8.7 6B 5 /8-8 06.7.86.30 8B 3 /4-8 08.96.94.39 0B 7 /8-8 0.55.0.48 Female NPSM swivel FC5853 ash Size Thread Size φ FC5853 0404S /4-8 04.64.89.7 0606S 3 /8-8 06.75.89.30 0808S /-4 08.03.0.39 080S /-4 0.55.0.48 S 3 /4-4.63..6 S 37 (JIC) Male flare 9067 ash Size Thread Size φ 9067 4B 7 /6-0 04.63.88.7 6B 9 /6-8 06.75.89.30 S 4 inverted female flare 4743 ash Size Thread Size φ 4743 3 4B 3 /8-4 04..46.3 4B 7 /6-4 04..46.7 5 4B /-0 04.4.49.7 6B 5 /8-8 06.4.55.30 8 6B 3 /4-8 06.44.58.30 R U S B L ll dimensions in inches. ouble notch in nut for Universal type identification for both S 45 and 37 (JIC) connections. *Single notch in nut for S 45 identification. 69

RUSBL mender 477 ash Size Size φ 477 4B 04.85.3.7 6B 06.08.3.30 8B 08.44.38.39 0B 0 3.55.47.48 B 3.57.54.6 Compression type 4750 ash Tube Size Size Size φ 4750 3-4B 03 04.77.0.3 4B 04 04.77.0.7 5-4B 05 04.83.08.7 6B 06 06.07..30 8B 08 08.34.33.39 0B 0 0.57.03.48 90 elbow (short) 9038 S 45 swivel* 93 Universal swivel 9056 S 37 (JIC) swivel 90 elbow (long) 90465 S 37 (JIC) swivel FC585 Universal swivel ash Size Thread Size φ 9038 6S* 5 /8-8 06.69.83.30.85 93 4S 7 /6-0 04.45.70.7.68 8 6S 3 /4-6 06.9.04.30.09 8S 3 /4-6 08.06.05.39.09 9056 6S 9 /6-8 06.70.83.30.85 90465 6S 9 /6-8 06.70.83.30.8 FC585 0404S 7 /6-0 04.45.70.7.80 S male inverted flare 45 elbow 90944 ash Size Thread Size φ 90944 4S 7 /6-4 04.46.70.7.96 6S 5 /8-8 06.57.70.30.96 ash Thread Size T Size φ FJ7044 0404S 9 /6-8 04.0.35.7 0606S /6-6 06.6.39.6 0808S 3 /6-6 08.50.49.38 S 3 /6-.07.55.6 ash Thread Size T Size φ FJ703 ORS Swivel Straight FJ7044 ORS Swivel 45 elbow FJ703 0404S 9 /6-8 04.64.89.7.4 0606S /6-6 06.84.97.30.44 0808S 3 /6-6 08.34.3.39.59 S 3 /6-3.4.90.6.83 R U S B L 45 elbow FC5848 S 45 swivel* FC5847 S 37 (JIC) swivel FC5849 Universal swivel ash Size Thread Size φ FC5848 0606S* 5 /8-8 06.80.93.30.39 FC5847 0606S 9 /6-8 06.80.93.30.39 FC5849 0404S 7 /6-0 04.56.8.7.33 0808S 3 /4-6 08.30.8.39.55 S male inverted flare 90 elbow (short) 9037 S male inverted flare 90 elbow (long) 9036 ash Size Thread Size φ 9037 4S 7 /6-4 04.08.33.7.69 6S 5 /8-8 06.0.33.30.73 8 6S 3 /4-8 06.9.33.30.74 8S 3 /4-8 08.34.33.39.75 9036 6S 5 /8-8 06 3.4.38.30.73 ORS Swivel 90 elbow FJ7358 ash T Size Thread Size φ FJ7358 0404S 9 /6-8 04.5.77.7.8 0606S /6-6 06.70.93.30.9 0808S 3 /6-6 08.06.05.39.5 S 3 /6-3.3.70.6.90 ll dimensions in inches. ouble notch in nut for Universal type identification for both S 45 and 37 (JIC) connections. *Single notch in nut for S 45 identification. 70

RUSBL BSP SOCKTLSS for use with 556, 565, 575, FC33, FC647 BSP male 07. ash Size Thread Size φ 07. 4 4 /4-9 04.56.8.6 39.5 0.5 4.0 6 6 3 /8-9 06.73.87.30 44 7.5 8 8 /-4 08.97.94.39 50 4 0.0 0 0 5 /8-4 0.64.0.47 67 8.0 3 /4-4.6.0.6 66.5 8 5.5 6 -.76.4.6 70 3.5 5.5 BSP Female swivel 07.390 ash Size Thread Size φ 07.390 4 4 /4-9 04 6 6 3 /8-9 06 8 8 /-4 08 0 0 5 /8-4 0 3 /4-4 6 -.79.04.6 45.5 6.5 4.0.97.0.30 50 8 7.5.0.8.39 56 30 0.0.76..47 70 3.0.8.30.6 7.5 33 5.5.93.4.6 74.5 36 5.5 for use with 556, 565, 575, FC33, FC647 ash Size Thread Size φ 07.05 4 4 6 4 8 6 0 6 3 8 6 0 0 M.50.75.6 x.5 04 38 9 4.0 M4.50.75.6 x.5 04 38 9 4.0 M6.6.75.30 x.5 06 4 9 7.5 M8.6.75.30 x.5 06 4 9 7.5 M.85.83.39 x.5 08 47 0.0 M6.40.87.47 x.5 0 6.0 M30.59.87.6 x.5 64 5.5 ash Size Thread Size φ Rφ 07.0 6 4 8 4 0 6 6 5 8 8 0 Metric SOCKTLSS Metric male 60 IN 763/7647 07.05 Metric male 4 IN 390/390 I. Rh. 07.0 M.50.75.6.4 x.5 04 38 9 4.0 6 M4.50.75.6.3 x.5 04 38 9 4.0 8 M6.65.79.30.39 x.5 06 4 0 7.5 0 M8.65.79.30.47 x.5 06 4 0 7.5 M.85.83.39.59 x.5 08 47 0.0 5 M6.36.83.47.7 x.5 0 60.0 8 M30.50.98.6.87 x 63.5 5 5.5 Metric universal female swivel 60 IN 763/7647 07.006 /07.00 /07.4 ash Size Thread Size φ 07.006 4 4 8 6 07.00 6 4 0 6 3 8 6 0 07.4 0 M.48.73.6 04 x.5 37.5 8.5 4.0 M6.63.77.30 06 x.5 4.5 9.5 7.5 M4.38.63.6 04 x.5 35 6 4.0 M8.5.65.30 06 x.5 38.5 6.5 7.5 M.83.8.39 x.5 08 46.5 0.5 0.0 M6.4.7.47 0 x.5 57 8.0 M30..7.6 x.5 56.5 8 5.5 ash Size Thread Size φ Rφ 07.006 4 4 8 6 07.00 6 4 0 6 3 8 6 0 Metric universal female swivel 4 IN 390/390 I.Rh. 07.006 /07.00 M.48.73.6.4 04 x.5 37.5 8.5 4.0 6 M6.63.77.30.39 06 x.5 4.5 9.5 7.5 0 M4.38.63.6.3 04 x.5 35 6 4.0 8 M8.5.65.30.47 06 x.5 38.5 6.5 7.5 M.83.8.39.59 08 x.5 46.5 0.5 0.0 5 M6.4.7.47.7 0 x.5 57 8.0 8 M30.40.89.6.87 x 6.5 5.5 Inches in bold type. Millimeters in light type. Material for BSP and Metric fittings is steel. *Rφ is tube O.. and refers to mating component when not called out on the illustration. *Rφ is tube O.. and refers to mating component when not called out on the illustration. Material for BSP and Metric fittings is steel. Inches in bold type. Millimeters in light type. 7

RUSBL Power Steering & ir Brake Reusable fittings for use with 550, 554, 555, 570 ash Size Thread Size φ 47930 4 4S /4-8 04.03.09.9 4 6S /4-8 06.4.4.30 6 6S 3 /8-8 06.4.4.30 8 6S /-4 06.3.3.30 8 8S /-4 08.85.58.36 ash Size Thread Size φ 90800 Male pipe 47930 S 37 (JIC) swivel 90800 4S 7 /6-0 04.08.4.7 5 4S /-0 04.3.9.9 6S 9 /6-8 06.3.3.30 ash Size Thread Size φ 90604 4 6S 7 /6-4 06.67.67.8 6S 5 /8-8 06.67.67.30 ash Size Thread Size φ 90605 Male inverted flare 90604 Male inverted flare 45 elbow 4 6S 7 /6-4 06.95.95.8.96 6S 5 /8-8 06.95.95.30.96 S 45 swivel 45 elbow 90607 ash Size Thread Size φ 90607 4 6S 7 /6-0 06.06.06.8.33 6S 5 /8-8 06.8.8.30.39 S 45 swivel 90 elbow 90608 ash Size Thread Size φ 90608 4 6S 7 /6-0 06.95.95.8.68 6S 5 /8-8 06.08.08.30.85 R U S B L S 37 (JIC) male flare FC775 ash Size Thread Size φ FC775 0606S 9 /6-8 06.3.3.30 USF swivel 47950 ash Size Thread Size φ 47950 8 6S 3 /4-0 06.9.30.30 ash Size Thread Size φ 90606 4 6S 7 /6-4 06.58.58.8.69 5 6S /-0 06.58.58.4.69 6S 5 /8-8 06.58.58.30.73 ash Size Thread Size φ 47960 Male inverted flare 90 elbow 90606 S 45 swivel 47960 4 6S 7 /6-0 06..3.7 6S 5 /8-8 06.3.3.30 S male flareless with nut and ferrule 90609 ash Size Thread Size φ 90609 4 6S 7 /6-0 06.44.97.0 6S 9 /6-8 06.50.98.8 ll dimensions in inches. NOT: For correct socket part number, see page 73. 7

RUSBL for use with 550, 554, 570 Union Part number 038 4 8S 3 /4-0 USF to /4-inch male pipe thread Part number 038 6 8S 3 /4-0 USF to 3 /8-inch male pipe thread Gladhand Part number 903 8 /-inch female pipe thread Spring Guard Part number 900774 6 Fittings specified in charts can be used with or without spring guard for use with FC5, FC35 ccessories Band clamp Band clamp and nipples for use with 66, FC38, FC69 Band clamp FF905 ash Size FF905 Size 0 0 6 0 0 Bolt Swivel Flange for use with 53, 53 Male Pipe 458 ash Size Thread Size φ 458 Railroad ir Brake Reusable fittings 8 0S /-4 0.85.67.45 S 3 /4-4.9.67.58 6S 3 /4-4 6 3.6.79.8 6 6S - / 6 3.35.98.8 6 0S - / 0 3.6..05 6 4S - / 4 3.73..8 0 4S /4- / 4 3.76.5.8 Railroad air brake flange fittings Nipple Socket Part Number Part Number Size ø FJ4649-6S 9-6S -6 3.08.7.8 FJ4649-60S 9-0S -0 3.46.97.05 FJ4649-04S 9-4S -4 3.34.73.8 *Contact aton eroquip for Flange Part Number. 45 lbow Bolt Swivel Flange Silicone hose clamp FF948 Use with Use with ash FC5 FC35 Size ash Size ash Size FF948 08, 0 08, 0 6, 4 4 6 6, 8, 0, 3 4, 6, 8 40 3, 36, 38 48 40, 44 5 48 60 56 68 64 ll dimensions in inches. Nipple Socket Part Number Part Number Size ø FJ4709-60S 9-0S -0 4.03.54.05.9 FJ4709-04S 9-4S -4 4.73 3..8.03 *Contact aton eroquip for Flange Part Number. 90 lbow Bolt Swivel Flange Nipple Socket Part Number Part Number Size ø FJ4650-6S 9-6S -6 3.65.8.8.06 FJ4650-60S 9-0S -0 4.5.66.05.3 FJ4650-04S 9-4S -4 4.60.99.8.63 *Contact aton eroquip for Flange Part Number. R U S B L 73

RUSBL for use with PTF 807, FC86, FC465 Male Pipe 38-9067 ash Size Thread Size φ 38 9067 fittings 4 /8-7 04.35.89.6 4 4 /4-8 04.54.08.6 4 5 /4-8 05.58.07.3 4 6 /4-8 06.66.3.8 6 6 3 /8-8 06.66.3.8 6 8 3 /8-8 08.79.6.38 8 0 /-4 0.3.46.47 3 /4-4.6.6.59 6 6 - / 6.48.86.83 0 0 /4- / 0.83.7.06 for use with 807, FC86, FC465 S 45 swivel 63-90990 ash Size Thread Size φ 63 90990 4 7 /6-0 04.58..6 5 /-0 05.68.7.3 6 5 /8-8 06.77.5.8 8 3 /4-6 08.98.36.38 0 7 /8-4 0..54.47 /6-4.33.67.59 45 elbow 90773 Universal FC934 S 45 swivel fittings 9077 Universal FC97 S 45 swivel ash Size Thread Size φ 9077-3S 3 /8-4 03.7.93.09.87 4S 7 /6-0 04.4.95.6.68 5S /-0 05.5.00.3.77 6S 9 /6-8 06.6.0.8.85 8S 3 /4-6 08.03.4.38.09 0S 7 /8-4 0.6.49.47.3 0-S 7 /8-4.3.57.46.3 S /6-.8.7.59.8-6S /6-4 6.87..58.8 6S 5 /6-6 3.0.49.8.39 FC97 0606S 5 /8-8 06.6.0.8.85 S /6-4.80.9.59.8 R U S B L S 37 (JIC) swivel 63-90600 ash Size Thread Size φ 63 90600 4* 7 /6-0 04.58.3.6 5* /-0 05.68.7.3 6* 9 /6-8 06.74..6 8* 3 /4-6 08.98.35.38 0* 7 /8-4 0..54.47 * /6-.33.67.59 6* 5 /6-6.5.9.83 0* 5 /8-0.9.7.06 ash Size Thread size φ 3S 3 /8-4 03.50.7.09.46 4S 7 /6-0 04.5.05.6.33 5S /-0 05.6..3.36 6S 9 /6-8 06.7.0.8.39 8S 3 /4-6 08.7.64.38.55 0S 7 /8-4 0.46.79.47.64 S /6-.86..59.78 6S 5 /6-6 3.30.68.83.07 0S 5 /8-0 3.80 3.4.06. 90773- FC934-0606S 5 /8-8 06.7.0.8.39 S /6-4.86..59.78 *lso supplied in stainless steel. dd suffix C to part number and delete prefix 63. S 37 (JIC) swivel only Universal type identification for both S 45 and 37 connections. NOT: Sleeve part number 900568-(size). NOT: For correct socket part number, see page 73. 74

RUSBL -bolt swivel flange 63 9066 Flange ash ead Size ia. Size φ 63 9066 6.88 06.78.6.8.88.07.4.56 6.88 6.8.49.9 Compression ball sleeve 38 9074 ash Tube Size Size Size φ 38 9074 8 08 08.66.04.38 0 0 0.85.8.47.08.4.59 S ball sleeve* 9078 ash Size Thread Size φ 9078 8S /6-0 08.07.44.38 0 8S 3 /6-8 08.07.44.38 0S 3 /6-8 0.6.49.48 S -8.4.76.59 NOT: For correct socket part number, see page 73. *Some B-W compressor adapters require special mating nuts. For 3 /6 8 thread size for / O.. Tubing, using fitting 9078 0 8S with 807-8. For special thread size 7 /8 8, use fitting 9074 0S with 807 0. NOT: Sleeve part number is 900568 (size) ll dimensions in inches. Special ball sleeve* 9074 ash Size Thread Size φ 9074 0S 7 /8-8 0.6.49.48 S male inverted flare Straight FC906 ash Size Thread Size φ FC906 0404S 7 /6-4 04.3.66.6 0505S /-0 05.7.66.3 0506S /-0 06..69. 0606S 5 /8-8 06..69.8 0808S 3 /4-8 08.47.84.38 00S 7 /8-8 0.78..47 S /6-6 - 3.0.37.59 S male inverted flare 45 elbow FC9063 ash Size Thread Size φ FC9063 0505S /-0 05.46.94.3.96 0506S /-0 06.50.97..96 0606S 5 /8-8 06.50.97.8.96 0808S 3 /4-8 08.66.04.38.93 00S 7 /8-8 0.96.9.47.03 S /6-6 3.0.44.59.0 S male inverted flare 90 elbow 90950 ash Size Thread Size φ 90950 4S 7 /6-4 04.04.57.6.69 5S /-0 05.08.57.3.69 5-6S /-0 06..60..69 6S 5 /8-8 06..60.8.73 8S 3 /4-8 08.3.69.38.74 0S 7 /8-8 0.66.99.47. S /6-6.73.07.59.35 NOT: Sleeve part number is 900568-(size) for use with PTF 808 Male pipe 38 9068 ash Size Thread Size φ 38 9068 6 8 3 /8-8 08.9.3.35 8 0 /-4 0..55.44 3 /4-4.40.63.56 6 6 - / 6.63.86.83 0 0 /4- / 0 3.05.09.06 4 4 /- / 4 3.6.0.8 S 37 (JIC) swivel 63 90535 ash Size Thread Size φ 63 90535 fittings 8 3 /4-6 08.07.48.35 0 7 /8-4 0..64.44 /6-.46.70.56 6 5 /6-6.66.90.83 0 5 /8-0 3.4.9.06 4 7 /8-4 3.38.4.8 R U S B L NOT: Sleeve part number is 90055-(size). 75

SPLIT FLNGS, KITS & O-RINGS Split flanges eroquip has standard pressure series (code 6) and high pressure series (code 6) split flange components in kit form that save time in selecting and ordering. ach kit includes two flange halves, 4 grade 8 hex bolts, 4 lock washers and an O-Ring. The standard kit has a Buna-N 90 durometer O-Ring that is compatible with petroleum and water base hydraulic fluids. Optional kits contain PR and Viton* O-Rings for applications where fluid compatibility or high temperatures require other than Buna-N O-Rings. K Maximum Flange ead Flange Operating Recommended imension iameter ash Pressure* Bolt Torque (inches) (inches) Size (PSI) (lb-in.) Code 6.50.9 08 5000 75 5.88.50 5000 5 350.06.75 6 5000 35 45.3.00 0 4000 45 550.75.38 4 3000 550 700 3.06.8 3 3000 650 800 3.50 3.3 40 500 950 00 4.9 4.00 48 000 650 800 Code 6.59.5 08 6000 75 5.00.63 6000 300 400.5.88 6 6000 500 600.6. 0 6000 750 900 3..50 4 6000 400 600 3.8 3. 3 6000 400 600 *Per S J58 standard. Two methods can be used to determine the flange dash size and code. The first is by measuring the flange head diameter on the fitting itself (the K dimension). The second is by measuring the dimension on the flange or the flange port. ither will determine the dash size and the code since these dimensions are exclusive to either code 6 or code 6 split flange kits. See chart for these dimensions. In some cases, split flange fittings are available for hoses which exceed the pressures listed; when ordering fittings or hose assemblies, the terminal end performance rating may reduce the overall rating of the assembly. *Viton is a upont trademark. ssembly procedure Many leakage problems can be avoided if the split flanges are properly assembled. To properly assemble:. Clean all mating surfaces.. Lubricate the O-Ring. 3. Partially tighten each bolt in rotation until all are fully tightened to the recommended torque value. ow to Order:. etermine the dash size and the code.. Select O-Ring for fluid compatibility. 3. Order by kit number shown on page 77. 76

SPLIT FLNGS, KITS, O-RINGS Split Flange alf S J58 Code 6 449-74446 Zinc plated yellow, chromate finish standard series required Split Flange alf S J58 Code 6 FC345 Zinc plated yellow, chromate finish, high pressure 6000 psi series required Split Flange alf quivalent performance to S J58 Code 6 FC73 Powdered metal, zinc plated yellow chromate finish required ll dimensions in inches. Flange Nominal Flange ash Flange ead Part Number Size Size ia. ø G 449 74446 08 08 /.9.50.34.34.50 449 74446 3 /4.50.88.44.4.56 449 74446 6 6.75.06.5.4.6 449 74446 0 0 /4.00.3.59.47.56 449 74446 4 4 /.38.75.70.53.6 449 74446 3 3.8 3.06.84.53.6 449 74446 40 40 / 3.3 3.50.00.53.75 449 74446 48 48 3 4.00 4.9..66.88 FC345 449 3 /4.63.00.47.4.75 FC345 6 449 6.88.5.55.50.94 FC345 0 449 0 /4..6.6.60.06 FC345 4 449 4 /.50 3..7.66.9 FC345 3 449 3 3. 3.8.88.78.44 FC73 6 70 6.75.06.5.4.70 FC73 0 70 0 /4.00.3.59.47.70 FC73 4 70 4 /.38.75.70.53.76 Kit Number FF593 (size) Includes: Flange halves (449-74446) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) (Viton* kit part number, FF687 size) (PM kit part number, FF688 size) FF595 (size) Includes: Flange halves (FC345) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) (Viton* kit part number, FF689 size) FF84 (size) Includes: Flange halves (FC73) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) 4 ole Flange S J58 Code 6 FC9 449 3 /4.88.88 3 /8-6 FC9 6 449 6.06.03 3 /8-6 FC9 0 449 0 /4.3.9 7 /6 4 FC9 4 449 4 /.75.4 /-3 FC9 Zinc plated, yellow chromate finish standard series vailable without threaded holes, as part number FC3459-size-449. FC9 3 449 3 3.06.69 /-3 FC9 40 449 40 / 3.50.00 /-3 *Viton is a upont trademark. 77

O-RINGS O-Rings for S J58 Split Flange Cat Flange -Ring* O-Rings for Stāplok Fittings O-Ring Base Operating Number Material Temperature Range FF906 80 durometer 65 F to +300 F PM ( 55 C to +50 C) FF9446 90 durometer 40 F to +50 F (Standard) Buna-N ( 40 C to + C) 046 90 durometer 5 F to +400 F Viton ( 5 C to +05 C) Part B C Number Ref Ref Ref Ref Ref FF9039-.7.00.0.0.35 FF9039-6.5.5.0.0.35 FF9039-0.77.50.0.0.35 FF9039-4.03.76.0.0.35 FF9039-3.78.5.0.0.35 Temperature range: -40 F to + F. Material: Nitrile (Buna-N) *To be used only with Cat flange. O-Ring Base Operating Number Material Temperature Range FF9508 90 durometer 40 F to +50 F (Standard) Buna-N ( 40 C to + C) Flange Nominal O-Ring ash ash Flange Size esignation Size Size 0 08 /.734.39 4 3 /4.984.39 9 6.96.39 0 /4.484.39 5 4 /.859.39 8 3.34.39 3 40 /.734.39 37 48 3 3.359.39 O-Rings for Bump Tube O-Ring Seal and O-Ring Pilot Fittings 546 Material: Chloroprene (Neoprene) urometer: 7 Temperature Range: 65 F to +300 F O-Rings Seal Kit O-Ring O-Ring Part Pilot Number ash Size 546 06.30.07 546 3 08.46.07 546 5 0.55.07 546 7.676.07 Part No. FF080-0 Includes metal box, O-Rings for ORS 4 through 4, O-Ring boss 04 through 3, Split flange 08 through 3, 4 packages with twelve 90 durometer nitrile O-Rings per package. Packages can be ordered individually by part number listed. Stāplok O-Ring ash ash Size esignation Size 04 04.36.079 06 06.394.079 08 08.5.098.748.098 6 6.984.098 0 0.99.098 4 4.575.8 3 3.968.8 Backup Rings and Staples for Stāplok Fittings FF9509 FF967 Stāplok Backup Ring Staple Fitting Size Part Number Part Number Size 04 FF9509 04 FF967 04S 04 06 FF9509 06 FF967 06S 06 08 FF9509 08 FF967 08S 08 FF9509 FF967 S 6 FF9509 6 FF967 6S 6 0 FF9509 0 FF967 0S 0 3 FF9509 3 FF967 3S 3 O-Ring Individual Connection Package O-Ring Size Part Number Part Number 04 FF066 0 FF9446 ORS* O-Ring Boss Split Flange 06 FF066 0 FF9446 08 FF066 0 4 FF9446 4 0 FF066 0 6 FF9446 6 FF066 0 8 FF9446 8 6 FF066 0 FF9446 0 FF066 0 5 FF9446 5 4 FF066 0 9 FF9446 9 04 FF073 0 04 67 4 05 FF073 0 05 67 5 06 FF073 0 06 67 6 08 FF073 0 08 67 8 0 FF073 0 0 67 0 FF073 0 67 6 FF073 0 6 67 6 0 FF073 0 0 67 0 4 FF073 0 4 67 4 3 FF073 0 3 67 3 08 FF066 0 0 FF9446 0 FF066 0 4 FF9446 4 6 FF066 0 9 FF9446 9 0 FF066 0 FF9446 4 FF066 0 5 FF9446 5 3 FF066 0 8 FF9446 8 *For ORS O-Ring Kit order part number: FF065-0, only includes ORS O-Rings. 78

O-RINGS esignating Separate S Boss O-Rings To order eroquip O-Rings separately without fittings specify the size and material by using the O-Ring base number and dash size. The charts below offer a simple method to assure the correct O-Ring for your application. O-Ring Base Operating Number Material Temperature Range 67 90 urometer 30 F to +50 F (Standard) Buna N ( 34 C to + C) Nitrile Rubber 033 PR 65 F to + F thylene Propylene ( 55 C to +00 C) Rubber 068 Viton* 5 F to +400 F Fluoroelastomer ( 5 C to +05 C) 0 Buna N, Low 65 F to +5 F Temperature ( 55 C to +07 C) Nitrile Rubber O-Ring ash Size Tube Size 04 04 ( /4).35.07 06 06 ( 3 /8).468.078 08 08 ( /).644.087 0 0 ( 5 /8).755.097 ( 3 /4).94.6 6 6 ().7.6 0 0 ( /4).475.8 4 4 ( /).70.8 esignating Separate ORS O-Rings To order eroquip O-Rings separately without fittings specify the size and material by using the O-Ring designator and O-Ring base number. The charts below offer a simple method to assure the correct O-Ring for your application. ORS O-Ring Base Operating Number Material Temperature Range FF9446 90 urometer 40 F to +50 F (Standard) Buna N ( 40 C to + C) Nitrile Rubber FF9807 PR 65 F to +300 F thylene Propylene ( 55 C to +50 C) Rubber 046 Viton* 5 F to +400 F Fluoroelastomer ( 5 C to +05 C) FF9855 Buna N, Low 65 F to +5 F Temperature ( 55 C to +07 C) Nitrile Rubber 546 Neoprene 65 F to +300 F ( 55 C to +50 C) O-Ring ORS Size esignation Tube Size 04.30.07 06.364.07 4 08.489.07 6 0.64.07 8.739.07 6.96.07 5 0.76.07 9 4.489.07 *Viton is a upont trademark. 79

80 RTURN TO CONTNTS PG