ompany Profile Subsidiary Profiles Products TRP International, Inc. Throughout this catalog a TRP Service Mark appears next to those products manufactured by TRP. ONTNTS TRP International, Inc....................................................... TRP istribution............................................................ TRP gricultural ivision................................................... VS Technologies, LL.................................................... 5 utt Weld Style Spindles................................................................ 6 Hot orged Integrated lange...................................................... 6 Hot orged Straight................................................................... 6 ar Stock................................................................................ 6 Hot orged rop Spindles.............................................................. 7 Round ar Stock Spindles............................................................. 8 Square ar Stock Spindles............................................................. 9 Hot orged rop oat Trailer Spindle.............................................. 0 rake langes........................................................................... Spindle asteners & ccessories................................................... ust aps Rubber Plug............................................................. Tapered Roller earings............................................................... rease Seals............................................................................ 5 rake rums............................................................................. 6 Idler Hubs................................................................................ 7 Hydraulic rakes....................................................................... 8 lectric rakes.......................................................................... 9 Leaf Springs............................................................................. 0 U-olt Tie Plates........................................................................ Spring Seats............................................................................. Shackle Links............................................................................ 5 ast qualizers......................................................................... 6 Spring Hangers /" Wide Springs.......................................... 7 Steel abricated qualizers " Wide Springs.................................. 8 Spring Hangers " Wide Springs................................................. 9 0k eneral uty Steel abricated qualizers.5" Wide Springs........... 0 0k eneral uty Spring Hangers.5" Wide Springs......................... Suspension asteners.................................................................. U-olts.................................................................................... Mobile Home xle Products......................................................... Leaf Spring ushings.................................................................. 6 Shock bsorber Shock Tie Plates & Mounting rackets.................... 7 TruWeld-6 Weld Wire................................................................. 8 Secondary ustom Operations ustom Manufactured omponents.... 9 International Supplier Partners...................................................... 0
TRP International, Inc.... ormed in 99, TRP International, Inc. is a diversified manufacturing and distribution corporation. t TRP we talk about filling in the white space as a way of growing the company. This strategy allows us to expand our product offerings, participate in new market segments, and maintain a competitive position while staying close to the things we know. We accomplish this by introducing new products, enhancing current product lines, partnering with other companies or by making acquisitions. Whatever path we take, our goal is to provide our customers with an expansive line of quality products distributed on schedule at competitive prices with responsive and professional service. Through the TRP group of companies and global partners we provide products to a variety of ground transportation equipment industries. y leveraging our expertise in the areas of ngineering, Manufacturing, International Trade and istribution combined with a commitment to ongoing investments in technology and people, our objective is to share in the success of our customers by helping them maximize their efficiency while minimizing costs. ngineering Our engineering staff has experience in various design and manufacturing environments including leaf springs, tapered roller bearings, closed-die forgings, metal stampings, and N machining. Our resources include professional mechanical, quality, and metallurgical engineers. With these skills we are striving every day to improve the overall cost and quality of the products we offer. TRP has a focus on continuous improvement that is reflected in investments in computer aided design () software, and a coordinate measuring machine (MM). These tools help our engineers assist you in making the right choice for your components. Manufacturing The TRP companies take pride in the capability and efficiency of each piece of equipment used to manufacture our products. Year 8 investments in a -axis, live tooling N lathe and a high capacity axis horizontal machining center are just a sampling of the investments made for the improvement of manufacturing. We strive to incorporate lean principles to keep costs down in our production facilities. Our charter is to find waste and eliminate it. ach facility takes pride in shipping quality products and maintains a quality system that builds the framework for verifying that we meet customer specifications. International Trade With over 0 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and hina we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North merica from abroad. ISO 900:8 istribution With state of the art technology for order processing and fulfillment combined with strategically located distribution centers, we can effectively serve the requirements of customers from coast to coast in the U.S., as well as anada and Mexico. Our constant attention to logistics and evaluation of carrier performance and pricing, assures the most efficient, cost effective shipping methods resulting in faster delivery and lower total product costs. The next few pages of this catalog profile the individual TRP subsidiary companies and provide information on their process capabilities and the representative products they provide.
TRP istribution... ISO 900:8 ISTRIUTION TRP istribution is a major supplier of axle and suspension components to light and medium duty trailer axle manufacturers, trailer parts distributors, and trailer builders. It functions as the marketing and sales organization for the TRP subsidiary company, VS Technologies, LL. In addition TRP istribution is the exclusive distributor in North merica of leaf springs for Rockwell merican Manufacturing and steel forgings for hioni & Valaperta. With strategically located distribution centers throughout the United States the products are closer to the customer helping to minimize transit times and shipping costs as well as shortening the material planning cycle. ustomer requirements are fulfilled utilizing a state of the art networked system linking the distribution centers. This enables us to process orders efficiently, with greater accuracy, and usually within one business day. Whether through domestically manufactured products from TRP International's subsidiary company or products sourced internationally through our global partners, TRP istribution has a significant commitment to inventory. This commitment assures the customer of their requirements being met in the time frame desired. USTOM ORIN IVISION hioni & Valaperta is located in the small town of rba in Northern Italy. manufacturer of custom closed die steel forgings, &V ships forgings throughout the world. This family owned business of over 0 years supplies forgings and finished components to world-class industrial companies including KN, aimler-hrysler, udi and Volkswagen. &V has positioned itself as a world-class forging supplier, combining unique technology and equipment with highly skilled and experienced employees. Together, &V and TRP International have forged a secure business relationship dating back to 99. &V selected TRP as its North merican distributor and product representative because of TRP s solid reputation in the trailer industry. Through combined sales and engineering efforts supported by a broad domestic manufacturing and distribution base, TRP and &V supply unparalleled quality forgings to customers in North merica. TRP and &V value added capabilities grew in 999 with the acquisition of VS Technologies, a production machining business located in lkhart, Indiana. The facility is equipped with highly capable N lathes and a robotic loading gantry system, enabling VS to increase the output of the machine, while improving the quality of each component produced.
TRP gricultural ivision... TRP gricultural ivision is a supplier of spindles, hubs, bearings, grease seals, dust caps and other related components to the agricultural market. This new division was formed out of the acquisition of ZT Parts International, Inc. of lkhart, Indiana. y combining our domestic manufacturing capabilities at VS Technologies (see opposing page) with our international trade expertise at TRP International, we provide a broad range of high quality, competitively priced components to the agricultural market. Through our strategically located TRP istribution centers we have the product in stock and available for immediate shipment. Spindle products are manufactured to specific customer requirements and generally require a - week lead time to produce. Our exceptional staff of customer service personnel are prepared to assist with order entry, shipping logistics, and directing related customer inquiries to the appropriate individuals. While we are committed to carrying an extensive inventory of the most popular items, we have the resources in place to work with customer supplied design products as well. Please direct your inquiries to your TRP gricultural ivision sales representative or customer service contact. The following images are representative of the products available through TRP gricultural ivision. Information pertaining to the individual product specifications, packaging details, and part numbers can be viewed in a separate catalog available through your sales representative or customer service contact.
... VS Technologies is our world class production machining company located in lkhart, Indiana. The team at VS has many years of valuable experience in machining a wide variety of axle and suspension components for the light and medium duty trailer industry. xle spindles are the major product line ranging in diameters up to 5 inches and lengths exceeding 7 inches. These spindles can be machined from straight and drop hot forgings or hot rolled and cold drawn bar stock using the most advanced N lathes. Spindles can be machined complete with an assortment of nut anti-rotation devices (e.g. cotter pins, -flats, slots) lubrication passages and fittings, and welded brake flanges. We are also capable of machining to customer supplied custom designs. ontrol of raw materials and continuous monitoring and improvements in production processes insure consistent product quality. Stainless steel wear ring is available upon request rilling for lubrication is available upon request ll spindles are machined to a standard " - UNS- Thread (M) Machining of -lat is available upon request Welding of brake flange is available upon request PROSS PILITIS Sawing (bar, tube, rod, angle) Turning - N Lathes with antry Loading Systems Turning - utomatic Lathes (single spindle) Milling - utomatic (horizontal and vertical) rilling - utomatic (deep, cross, center) rinding - utomatic (O.) Thread orming utomatic Rotary Welding (MI) Manual Welding (MI) ssembly Tapping ounter oring Porting Induction Heating and ending RPRSNTTIV PROUTS Spindles enerator Shafts King Pins xle Shafts ouble nded Spindles ent Spindles Torsion Spindles/Torsion rms Torsion Inner ar earing Housings Valve odies Suspension locks ushings Tank langes Motor Mounts Please direct your inquiries to your TRP International sales representative. 5
UTT WL STYL SPINLS... HOT OR INTRT LN M H I SRIPTION IMNSIONS PRT NO. SPINL PITY UNIT H I SP-H-I-8L SP-H-I-855 SP-H-I-L- SP-H-I-L-5 #8 #8 # # 0,750 lb.,750,500,500.9 lb..97 7. 7..95".55".5".5".5".5" 6.5" 6.5" 8.5" 8.5".7".7".".5".76".76".79".79".06".06".9".9".5" 5.6" 5.6" 7.5" 7.5" HOT OR M H SRIPTION IMNSIONS PRT NO. SPINL PITY UNIT H SP-H-8T6 SP-H-8L SP-H-8S SP-H-855 SP-H-L- SP-H-L-5 SP-H-S SP-H-8K SP-H-0K99 T6 #8 #8 #8 # # # # #99,50 lb.,750 lb.,750 lb.,750 lb.,500 lb.,500 lb.,500 lb.,000 lb. 5,000 lb..0 lb..0 lb..00 lb..00 lb. 7.0 lb. 7.0 lb..80 lb. 0.00 lb. 7.0 lb..95".95".95".55".5".5".5".9".9".6".6".6".6".7".7" N/".7".75" 6.5" 6.5" 6.05" 6.5" 8.5" 8.5" 5.6" 8.6".5".50".7".7".7".".5".".5".75".06".76".76".76".79".79".79".79".999".06".06".06".06".9".9".9".9".79".".5".".50".75" M H R STOK PRT NO. SP-H-T8 SP-H-T8L SP-H-T6 SP-H-T6L SRIPTION IMNSIONS SPINL PITY UNIT T8 T8 T6 T6,000 lb.,000 lb.,50 lb.,50 lb..00 lb..5 lb..5 lb..50 lb.."."."." 6 N/".6" N/".6" 5.96" 6.68" 5.96" 6.68".5".5".50".50" 0.999" 0.999".06".06" 0.999" 0.999".06".06" H.75".75".75".75"
HOT OR ROP SPINLS... Patents Pending M " PRT SRIPTION IMNSIONS UNIT SP-TT-75 500# xle, " rop or -/8" Tube w/ lange.95".77" 5.6".7".76".06" 7.75 lb. SP-TT-75 500# xle, " rop or " Tube w/ lange.5".77" 5.6".7".76".06" 8.5 lb. SP-UT-00-6000# xle, " rop or " Tube w/ lange.5".6" 7.5".".79".9".0 lb. SP-UT-00-5 6000# xle, " rop or " Tube w/ lange.5".6" 7.5".5".79".9".0 lb. SP-UT-00L 6000# xle, " rop or " Tube w/ lange.5"." 7.5".".79".9".50 lb. SP-UTH-00 8000# xle, " rop w/ orged lange or -/" Tube.9" 7.55".5".79".9" 7.0 lb. orging material: ustom engineered automotive quality high strength steel. Spindles are machined to " - UNS- thread (M) with.90" cotter pin hole. Note: SP-H-0K99 is machined to.50" - UNS- thread (M) with." cotter pin hole. imension on Hot orged Integrated lange spindles is the brake nib pilot dimension. imension H on utt Weld Style ar Stock spindles is also available at.75". See page for Spindle asteners & ccessories. See page 0 for ustom Spindle Options. 7
ROUN R STOK SPINLS... M M Type Type PRT NO. SP-5T8 SP-5T6 SP-50T8 SP-50T6 SP-758 SP-8 SP-5 SRIPTION IMNSIONS TYP SPINL PITY UNIT T8 T6 T8 T6 #8 #8 #,000 lb.,50 lb.,000 lb.,50 lb.,750 lb.,750 lb.,500 lb..5 lb..5 lb..75 lb..00 lb..00 lb. 5.00 lb. 8.00 lb..5".5".50".50".75".5".7".7".7".7".7".7" 6.00" 8.5" 8.5" 8.5" 8.5" 8.5" 8.5".00".".".5".8".7".7"." 0.999".06" 0.999".06".76".76".79" 0.999".06" 0.999".06".06".06".9" ar stock material: S 05 hot rolled (cold rolled available upon request). ll spindles are machined to " - UNS- thread (M) with.90" cotter pin hole. See page for Spindle asteners & ccessories. See page 0 for ustom Spindle Options. 8
SQUR R STOK SPINLS... M M Type Type PRT NO. SP-50T8-SQ SP-50T6-SQ SP-08-SQ w/ seal ring SP-568-SQ SP-506-SQ w/ seal ring SRIPTION IMNSIONS TYP SPINL PITY UNIT T8 T6 #8 #8 #,000 lb.,50 lb.,750 lb.,750 lb.,500 lb..60 lb..90 lb..50 lb..00 lb. 5.00 lb..50".50".50".75".".".5" 6.05" 5.9" 8.5" 8.5" 8.5".00".00".".8".7".7".5" 0.999".06".76".76".79" 0.999".06".06".06".9" ar stock material: S 05 hot rolled. ll spindles are machined to " - UNS- thread (M) with.90" cotter pin hole. See page for Spindle asteners & ccessories. See page 0 for ustom Spindle Options. 9
HOT OR ROP OT TRILR SPINL... The ORIINL hot forged spindle was designed to eliminate the current tubular drop spindle fabrication method. This spindle provides added versatility, strength and durability. Increased production and cost reduction will occur due to the elimination of material waste, handling and unnecessary fabrication operations. This design is for the 500 lb. axle, but it can also be produced for the 0 lb. axle. oth spindles are available with or without brake flange. T-75 88.5 amber =.5 XL PLMNT The "x " or "x " tube is welded to the flat surface of the leg of the spindle. This spindle allows you to achieve a drop from.75" to.75." VILL ROPS I H.75" T-75 Patents Pending J K L M T-75.75" T-75 PRT IMNSIONS H I J K L UNIT SP-T-75.0".75".00".5".6".9".8".".".7".76".06" 7.75 lb. orging material: ustom engineered automotive quality high strength steel. ll spindles are machined to " - UNS- thread (M) with.90" cotter pin hole. See page for Spindle asteners & ccessories. See below for ustom Spindle Options. USTOM SPINL OPTIONS Welding of brake flange is available; add to the end of the part number. Welding of brake flange with studs is available; add to the end of the part number. Note: Studs are /8"- x 7/8". Only for 5.K to 7K axle applications. rilling for lubrication without -lat is available; add Z to the end of the part number. rilling for lubrication with -lat is available; add Z to the end of the part number. lternate grease seal dimensions are available. Machining of -lat without lubrication is available; add to the end of part number. Installation of stainless steel wear ring is available; add SS to the end of part number. Installation of spindle nut and washer is available; add NW to the end of part number. ustom machining available upon request. 0
RK LNS... Type Type ll Type flanges are available with brake studs pressed in. dd to end of flange part number. Studs are /8"- x 7/8". Type / PRT PL-.0 PL-.5 PL-.6 PL-.75 PL-.7 PL-5. PL-5.75 PL-5. PL-5.- PL-5.5 PL-5.5- PL-. PL-.56 PL-.96 PL-.96 PL-. PL-.5 TYP IMNSIONS.75".75".0".".75".75".5".5".75".75".6".5".75".75".78".5".75".75".7".5".".5".".5".5".".5".75".5".5".".5".".5".5".".5".".".5".".5".5".5".5".".5".5".".5".75".75".".7".50".75".75".56".7".50".75".75".96".7".50".6".6".96".6".87".75".75".".7".50".75".75".5".7".50" OLT IRL.00".00".00".00".00".87".87".87".87".87".87" 5.8" 5.8" 5.8".96" 5.8" 5.8" R. NO. -9 - -6 - -6Q -6T -6 UNIT 0.75 lb. 0.8 pc 0.77 pc 0.7 pc 0.6 pc 0.80 pc 0.76 pc 0.80 pc 0.90 0.90 0.90.90.90.90.90.90.90 S pc.,500 pc,500 pc,000 pc,000 pc,000 pc,000 pc,000 pc,000,000,000,550,550,550,550,550,550 S,500 lb.,0 pc,55 pc,90 pc,80 pc, pc,00 pc,800 pc,900,900,900,050,050,050,050,050,050 Material: High quality pickled and oiled structural steel per STM specifications. olt hole size: Type -.8", Type -.", Type / -.5" Type flange has 60 machined locating nibs.
SPINL STNRS & SSORIS... LT NT TN WSHR PRT IMNSIONS OX OX -TW00.57".00".00",500 pc. 5 lb. LT ROUN SPINL WSHR PRT IMNSIONS OX OX -SW00.67".00" 0." 000 pc. 50 lb. LT -WSHR PRT IMNSIONS OX OX -W00.67".00" 0.88" 0." 950 pc. SPINL NUTS 5 lb. IMNSIONS PRT THR OX OX -SN00 "- N...6".00" 0.55" 00 pc. lb. OTTR PIN PRT SIZ IMNSIONS -P75 /8" x -/8".5" OX pc. OX lb. STINLSS STL WR RINS PRT WR-SS5 WR-SS8 WR-SS50 WR-SS75 WR-SS WR-SS5 PRT -ZRK IMNSIONS SPINL T T T #8 # #.".8".50".7".".".07".6".0".9".85".87" RS ZRK 0.6" 0.7" 0.65" 0.6" 0.59" 0.75" OX,000 pc.,000,000,000,500,500 OX 0 lb. 0 lb. 0 lb. lb. 6 lb. 7 lb. IMNSIONS OX OX SIZ /"- 8 TPR 0.56" 0.6" 0." 5,000 pc. lb.
UST PS RUR PLU... RULR UST P LU UST P Rubber Lube Plug PRT SRIPTION IMNSIONS R. NO. OX OX -78 * -78L - -L - -50-50L -75-75L -/" ust ap -/" Lubed ust ap " ust ap " Lubed ust ap -/" ust ap -/" ust ap -/" Lubed ust ap -/" ust ap -/" Lubed ust ap.78".78".99".99".".5".5".7".7".0".0".0".0".00".".5".8".5" N/.8" N/.8" N/ N/.8" N/.8" N/ N/ - - N/ - - -9-500 pc. 500 550 0 500 60 90 0 0 lb. 0 9 8 69 7 -RP Rubber Lube Plug fits.8" Lubed ust ap Hole.8" N/,000 Material: gage, zinc coated steel except for part number -75 which is 6 gage. right chrome plate available. Minimum order quantities and longer lead time will apply. Stainless steel construction available. Minimum order quantities and longer lead time will apply. Non-stock items. Minimum order quantities and longer lead time will apply. *
TPR ROLLR RINS... PRT *L-69 *L-6 *L-60 *L-689 *L-68 *L-680 *LM-6708 *LM-6700 *5580 *550 *5 *55 *LM-79 *LM-70 *LM-99 *LM-90 *LM-79 *LM-70 *LM-7 *LM-858 *LM-850 *LM-509 *LM-500 *JL-699 *JL-690 *5 *76 *HM-88 *HM-80 *HM-09 *HM-0 *8580 *850 *85 *075 *00 *JM-059 *JM-050 *JM-596 *JM-590 SRIPTION one one up one up up one up one up one up one up one up one up up one up one up one up one up one up one up one up up one up one up one up ON I..065".0000".775".500".7500".500" 0.6875" 0.7500" 0.8656".750".650".96".500".5".650".000".50".9685".559" UP O..9800".6".80".80".650".09".5700".780".780".800".565".890".80".770" 5.786".85".55".650".6875".5".07" OX 97 pc. 97 97 8 8 8 8 8 55 55 0 0 00 50 60 60 50 80 50 8 9 0 50 75 9 08 08 0 0 55 55 55 00 67 55 55 6 OX 5 lb. 59 7 7 7 5 9 5 5 6 50 65 6 5 0 7 5 8 60 9 5 0 9 0 0 5 5 6 6 5 5 5 6 5 S 0,69 pc. 0,69 0,69 6,6 6,6 6,6 6,6 6,6,980,980,0,0,00 6,,960,960,600,680 6,,608 6,9,680 5,00 6,00 6,9,888,888 60 60 50 86,980,980,980,980 6,0,980,980 576 86 S,87 lb., 97,69 97 900,76 900,87 96,76 88,800,5,65,0,9,0,69,908,68,60,0,908,5,0 68,0 70,60,,87 96 96,908,908,87 96,87, Other tapered roller bearings are available upon request. Non-stock items. Minimum order quantities and longer lead time will apply. *
RS SLS... OUL LIP RUR OT SLS PRT SHT IMTR OR IMTR SL O. SL WITH SPINL R. OX OX *S-50LR *S-500LR *S-687LR *S-79LR *S-5LR *S-50LR.50".500".687".79".5".0".979".98".56".56".7".7".986".990".568".568".78".78".06".50".500".500".75".75" T8 T6 #8 #8 # # 9T 59T 6855T 755T T T 680 pc. 680. 060 080 000 000 66 lb. 5 lb. 0 lb. 9 lb. 8 lb. lb. SINL LIP SLS PRT SHT IMTR OR IMTR SL O. SL WITH SPINL R. OX OX *S-50SL *S-500SL *S-79SL *S-98SL *S-5SL *S-50SL.50".500".70".98".5".50".979".98".56".506".7".7".98".987".565".50".77".76".50".88".500".8".75".75" T8 T6 #8 M/H # # 9V 59V 755V 950V V V 680 pc. 680. 080 0600 000 000 7 lb. lb. lb. lb. lb. 0 lb. OUL LIP SLS PRT SHT IMTR OR IMTR SL O. SL WITH SPINL R. OX OX S-50L.50".979".98".50" T8 9T 680 pc. 66 lb. S-500L.500".98".987".50" T6 59T 680. 5 lb. S-687L.687".56".565".500" #8 6855T 060 0 lb. S-79L.70".56".565".500" #8 755T 080 9 lb. S-5L.5".7".76"." # T 000 8 lb. S-50L.50".7".76".75" # T 000 lb. Material: Rubber = Nitrile una - 70 durometer compound. ll ouble Lip Seals are spring loaded. Non-stock items. Minimum order quantities and longer lead time will apply. * 5
RK RUMS... PRT SRIPTION SIZ OLT I. INNR R OUTR R UNIT S S RV-U-550.5K 5 on.50" L-68 L-60.0 lb. 95 pc.,00 lb. RV-U-575.5K 5 on.75" L-68 L-60.0 95,00 RV-U-5500.5K 5 on 5.00" L-68 L-60.0 95,00 RV-U-5550.5K 5 on 5.50" L-68 L-60.0 95,00 RV-U-6550.5K 6 on 5.50" L-68 L-60.00 95,90 RV-H-655 6.0K 6 on 5.50" 550 55.70 6,00 RV-H-865 7.0K 8 on 6.50" 550 76 7.00 5,00 RV-H-865-96 7.0K 8 on 6.50" 550 76 7.00 5,00 Studs are /"- 0 with yellow finished zinc plating. (RV-H-865-96 studs are 9/6"-8) Manufactured to automotive standards in ISO/TS-699 registered factory. ully integrated casting, machining, painting, and assembly operations. Mechanical die compression for superior sand compression. STM test bar method used to monitor tensile strength. Inspected 00% before painting including the races for proper seating. rums are chemically cleaned and painted black in electrostatic booth. 6
ILR HUS... PRT SRIPTION SIZ OLT I. INNR R OUTR R UNIT S S RVI-T-00.0K on.00" L-60 L-60 6.8 lb. 50 pc.,65 lb. RVI-T-550.5K 5 on.50" L-60 L-60 6. 680 pc.,70 lb. RVI-U-550.5K 5 on.50" L-68 L-60 7. 5 pc.,80 lb. RVI-U-575.5K 5 on.75" L-68 L-60 7. 5 pc.,695 lb. RVI-U-5500.5K 5 on 5.00" L-68 L-60 7. 5 pc.,695 lb. RVI-U-5550.5K 5 on 5.50" L-68 L-60 9.5 8 pc.,5 lb. RVI-U-6550.5K 6 on 5.50" L-68 L-60 9.60 pc.,0 lb. RVI-H-655 6.0K 6 on 5.50" 550 55.7 5 pc.,6 lb. RVI-H-865 7.0K 8 on 6.50" 550 76 7.0 pc.,05 lb. ll studs are /"- 0 with yellow finished zinc plating. Manufactured to automotive standards in ISO/TS-699 registered factory. ully integrated casting, machining, painting, and assembly operations. Mechanical die compression for superior sand compression. STM test bar method used to monitor tensile strength. Inspected 00% before painting including the races for proper seating. Hubs are chemically cleaned and painted black in electrostatic booth. 7
HYRULI RKS... TURS luminum wheel cylinders Stainless steel springs vailable in 0" and " sizes acromet: inorganic zinc rich coating to protect from rust RKS VILL 0"x -/" 0"x -/" "x " "x " Uni-Servo ree acking Uni-Servo ree acking PRT SRIPTION UNIT S S K-075 RH, 0" ree acking, -coat 9.59 lb. 56 pc.,60 lb. K-076 LH, 0" ree acking, -coat 9.59 56,60 K-075X RH, 0" ree acking, acromet 9.59 56,60 K-076X LH, 0" ree acking, acromet 9.59 56,60 K-08 RH, " ree acking, -coat.66 7,8 K-09 LH, " ree acking, -coat.66 7,8 K-08X RH, " ree acking, acromet.66 7,8 K-09X LH, " ree acking, acromet.66 7,8 K-8787 RH, 0" Uni-Servo, -coat 8.9 56,0 K-8788 LH, 0" Uni-Servo, -coat 8.9 56,0 K-50 RH, " Uni-Servo, -coat. 7,666 K-5 LH, " Uni-Servo, -coat. 7,666 acromet coating is only available in free backing brakes. 8
LTRI RKS... 7" x -/" " x " TURS S compliant S rated friction material vailable in 7", 0" and " sizes rake shoes incorporate fall off grind 0" x -/" PRT SRIPTION UNIT S S K-7-0.5K, 7" x -/", Left Hand ssembly 9..0 lb. 0 pc.,8 lb. K-7-0.5K, 7" x -/", Right Hand ssembly.0 lb. 0 pc.,8 lb. K-0-0.5K, 0" x -/", Left Hand ssembly 9.60 lb. 56 pc.,67 lb. K-0-0.5K, 0" x -/", Right Hand ssembly 9.60 lb 56 pc.,67 lb. K--0 7.0K, " x ", Left Hand ssembly.80 lb 6 pc. lb. K--0 7.0K, " x ", Right Hand ssembly.80 lb 6 pc. lb. Manufactured to automotive standards in ISO/TS-699 registered factory. Magnets tested 00% for pull force and conductivity. ully integrated manufacturing and assembly operations. etailed control plans utilized in manufacturing. 9
L SPRINS... Length OUL Y /" WI rch PRT -0M -76-77 -7-76 -79-78 - - -77-7 -7 -SW -76-7 -7-75 -76 -SW -SW -SW5 -SW6-650 -6500-6000 -WS -WS -WS -WS5 -WS6 -WS7 -WS8-6 -6-6 -67-557 O LVS 6 5 5 6 5 6 7 8 6 5 R LNTH "0.00" 0. 0.8 0.50....50.50.88 5.5 5.5 5.5 5. 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 7.00 7.00 7.00 7.00 7.00 R RH ".5".8.8.8.6.50.50.50.50.8.8.00.00..00.00.00.00.00.00.00.00....5.5.5.5.5.5.5.50.88.88.5.75 PITY PR SPRIN,500 lb.,700,000,00,50,750,000,00,500,50,750,750,000,500,500,900,750,500,950,500,50,500,000,000,500,500,000,500,000,750,000,00,000,50 WIHT H 9.0 lb. 6.0 7.00 9.0 9.0.00.0 9.0 0.70 8.0 9.60.70.70 5.0.00.0 5.0 7.00.70.80 6.0 9.0 7.00 9.0.0 9.90.00.00 7.0 0.0.0 7.0 9.0 0.0.00.0 7.0 SKI pc. 50 5 5 5 5 5 0 5 5 5 SKI,878 lb.,0 lb.,00 lb.,860 lb.,80 lb., lb.,80 lb.,860 lb., lb.,78 lb.,90 lb.,8 lb.,0 lb.,080 lb., lb.,58 lb.,0 lb.,5 lb.,0 lb.,760 lb.,08 lb.,88 lb.,00 lb.,80 lb.,0 lb.,97 lb.,9 lb.,798 lb., lb.,58 lb.,0 lb.,00 lb.,80 lb.,0 lb.,800 lb.,788 lb.,58 lb. RRN S UN-68,X-70 UN-69, X00 UN-67 UN-5 UN-6, 7-L UN-70, WH- UN-, 55-L UN-, 55-L UN-, 769 UN-9, SW UN-, SW SW, 98 UN- UN-7 UN-0, 76, SW UN-8, 76, SW UN-, 76, SW5 UN-0, 76, 7- UN-8, 76, 7-5 UN-, 76 UN-, SW6 UN-, 6-50, S UN-, 5-500, S UN-, 6-000, S UN-09, WS UN-050, WS UN-05, WS UN-05, WS5 UN-05, WS6 UN-05, WS7 UN-055, WS8 UN-, 57 UN-, 07 UN-0, 57 UN-, 6067 UN-, 557 Length SLIPPR LT /" WI rch PRT O LVS R LNTH R RH PITY PR SPRIN WIHT H SKI SKI RRN S S-07 S-0 S-0 S-05 S-0 S-5 S-7 S-8 5 ".50" 5. 5. 5. 0.00 0.00 0.00 0.00 "." 5.00 5.00 5.00.88.88.88.88 lb.,675 lb.,500,750,000,950,500,00.00 lb. 5.80 7.90 9.50 0.0.50.0 8.0 pc. 50 50 50 500 50, lb.,50,975,75,00 6,50,0,75 UN-07 UN-0 UN-0 UN-05 UN-08, W- UN-09, W- UN-00, W- UN-00N, W-5 0
Length SLIPPR OPN /" WI rch PRT SO- SO- SO- SO- SO-5 SO-6 SO-.0 SO-.0 SO-.0 SO-5.0 SO-6.0 O LVS 5 6 5 6 R LNTH "6.5" 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 R RH ".50".50.50.50.50.50.50.50.50.50.50 PITY PR SPRIN lb.,800 lb.,00,750,50,850,500,00,750,50,850,500 WIHT H 8.0 lb. 0.70.0.90 7.0.0 0.70.0.90 7.0.0 SKI 50 pc. 50 5 50 5 SKI,075 lb.,0,8,97,6,66,0,8,97,6,66 RRN S UN-6, UN-6, - UN-6, - UN-6, - UN-65, -5 UN-, -6 - - - -5-6 Length SLIPPR HOOK " WI rch PRT O LVS R LNTH R RH PITY PR SPRIN WIHT H SKI SKI RRN S SH-79 SH-70 SH-7 SH-7 SH-7R SH-7 SH-56 SH-55 5 5 7 5 6 "6.50" 6.50 6.50 6.50 6.50 6.50 6.50 9.50 ".8".00.06.8.8.00.50.50 lb.,500 lb.,500,500,500,000,00,00 5.80 lb. 6.0 7.60 0.0 0.50 7.00 0.50 8.70 50 pc. 50 50 5 5 5 5 00,66 lb.,60,60,550,56,75,56,870 UN-9, 60-T UN-0, 80-T UN-, 00-T UN-, 0-T 0-T R UN-, 0-T UN-60, 56 UN-6, 55 Length SLIPPR RIUS /" WI rch PRT O LVS R LNTH R RH PITY PR SPRIN WIHT H SKI SKI RRN S SR-W SR-W SR-W SR-WH SR-WI5 SR-08 SR-0 SR-0 SR-09 SR-09N 5 5 6 ".6".6.6.6.6.00.00.00.00.00 ".50".50.50.50.50.5.5.5.5.5 lb.,80 lb.,550,750,000,,600,800,00,00,750.0 lb. 5.0 7.80 9.00.0 7.80 0.90.0.0 8.0 50 pc. 50 50,050 lb.,50,558,800,0,558,80,80,90,75 UN-76, W- UN-77, W- UN-78, W- UN-79, WH- UN-80, WI-5 UN-08 UN-0 UN-0 UN-09 UN-09N Length MOIL HOM /" WI rch PRT O LVS R LNTH R RH PITY PR SPRIN USHIN I. WIHT H SKI SKI RRN S -70 5.5",000 lb. 0.590" ye 8.70 lb. 0 pc.,86 lb. UN-5, 7-0, T-0 Nylon bushings, brass bushings and rubber bushings are available upon request. ushing I: Standard = Nylon 0.56," R = Rubber 0.65,".0 = No bushing.0" * ll specifications given are for reference only. Spring mounting will affect actual capacity. The capacity given above is the maximum rating per spring.
U-OLT TI PLTS... 5 ( Places) 0.66" Type 0. 0. ( Places) 0.66" Type PRT TYP TU I. SPRIN WITH IMNSIONS R. NO. S S TP-757 TP-7575 TP-75 TP-75-T TP-75-56 TP-875 TP-8 TP-0075 TP-00 TP-0009 TP-50.75".75".8".8".50".75".75".75".75".75".75".75".9".".6".6".6".9".9".6".56".56".".9".".8".8".8".".56".8".59".59".6".75".75".00".50".50".75".00".75".00".00".00".50".50" 5.9".50" 5.9" 5.9" 5.9" 5.9" 5.9" 5.9" 7.00" N/ N/.80" N/.80".80".80".80".80".80" 5.69" 0." 0.56" 0.6" 0.56" 0.56" 0.56" 0.56" 0.56" 0.56" 0.6" 0.69" TP-7 - - - - - --,000 pc.,000,000,000,000,000,000,000,000,000,000,80 lb.,80,0,70,0,60,560,50,560,550,870 Material: High quality pickled and oiled structural steel per STM specifications. vailable galvanized and with clear or yellow chromate on zinc, call for availability and pricing.
U-OLT TI PLTS (cont.)... Type Type PRT TYP TU I. SPRIN WITH IMNSIONS R. NO. S S TP-875-50R TP-875-R TP-8R TP-0075R TP-00-56R TP-50050R TP-50000R TP-50000-8R TP-550R.8".8".8" 5.00" 5.00" 5.00" 5.".75".75".75".50".50".88".9".88".6".6" 5.77" 5.75" 5.87" 5.9".5".".50".5".60".5".88".88".8".50".75".75".50".75" 5.00" 6.00" 6.00" 5.00".75".75".75" 5.7" 5.7" 9.00" 9.00" 9.00" 9.00" N/ N/ N/ N/ N/ N/ N/ N/ N/ 0.50" 0.56" 0.50" 0.56" 0.56" 0.69" 0.69" 0.8" 0.8" -9-5 -6 pc.,000,50,,,50,0 lb.,,00,,00,000,80,00,000 Material: High quality, HSL pickled and oiled structural steel per STM specifications. vailable galvanized and with clear or yellow chromate on zinc, call for availability and pricing.
SPRIN STS... Round Tube Type Square/Rectangular Tube Type PRT SS-8 TYP TU I..8" SS-00.5".00" IMNSIONS.9".00".0" 0.56".85" 0.67" 0.".0" 0.56".85" 0.67" 0." S SS-75.75" 0.88".5" 0.9" 0.5".85" 0.67" 0." - 0.8 lb. pc. R. NO.,000 SS-50.50".76".00".0" 0.56".85" 0.67" 0." 906 0.75,500 SS-500 5.00".5" 6.00".60" 0.78".50" 0.88" 0.8" N/.,500 SS-.0" 0.9" 0.5".85" 0.67" 0." N/ 0.5-8 - UNIT 0.77 0.7 S 75 lb.,600 770 00,00 90 Material: High quality pickled and oiled structural steel per STM specifications.
SHKL LINKS....57 ( PLS) ll shackle links are available with shackle bolts pressed in. dd to end of shackle link part number. PRT IMNSIONS R. NO. I NO. UNIT S S SL-.5" 0.6" 0.".5" 8-0 0.0 lb. pc.,90 lb. SL-5 SL-50 SL-56.5".50" 0.6" 0.".5" 58 0.5.50".78" 0.6" 0.".5" 0.0.56".8" 0.6" 0.".5" 8-5 5 0.0,500,50,50 SL-6 SL-75.6".90".75".00" 0.6" 0.".5" 0.6" 0.".5" N/ N/ 0.6 0.6,55,558 SL-.".8" 0.6" 0.".5" 8-0.85,600 SL-50.50".75" 0.6" 0.".5" 8-.5 0. 6,000,97 SL-6 SL-5 SL-75 SL-5-50.6".5".75".5".90" 5.5" 6.0".5" 0.6" 0.6" 0.6" 0.6" 0." 0." 0." 0.5".5".5".5".50" 0.6 0.5 0.05 0.0,556,700,80,870 SL-50-50 SL-75-50 SL--50 SL-75-50 SL-00-50.50".75".".75".00".78".0".0" 5.0" 5.8" 0.6" 0.6" 0.6" 0.6" 0.6" 0.5" 0.5" 0." 0.5" 0.".50".50".50".50".50" 0.0 0.70 0.0 0.580 0.5,90,970,70,90,90 SL-50-50.50" 5.78" 0.6" 0.".50" 0.70,500 SL-55-50 SL-556-50 5.5" 5.56" 6.5" 6.8" 0.6" 0.6" 0.5" 0.5".50".50" 0.70 0.780,50,590 Material: High quality pickled and oiled structural steel per STM specifications. Shackle Links available with clear or yellow chromate on zinc plate and galvanized, call for availability and pricing. 5
ST QULIZRS... ll cast equalizers are manufactured from ductile iron. qualizers are manufactured to industry standards and come finished in black paint.... Q-56 Q-58 Q-58 Q- Q- Q- Q-0 Q-0 Q-6 Q-05 Q-05 Q-56 Q-R Q-R Q- Q-0 Q-0 Q-R89 Q-R89 Q-6 Q-R8 Q-R8 PRT IMNSIONS UNIT S S Q-R 5.50".50" 0.56" 0.56".65 lb. 50 pc. 75 lb. * Q-0 * Q-0 6.06" 5.75".00" 0.56" 0.56" 0.56" 0.56".85.95 60,000,900 * Q-56 6.".50" 0.56" 0.56".5,000,0 Q-58 6.5" 0.750" 0.56".5 900,5 Q-05 Q-6 * Q- 6.75" 9.06" 7.75".88" 0.56" 0.56" 0.56" 0.56" 0.56" 0.56".5.90.75 576 00 700,090,0 Q- 7.75".88" 0.750" 0.56".5 700,50 Q-R8 8.00".75" 0.750" 0.56".0 690 Q-R89 8.00".75" 0.56" 0.56".5 700 lso available galvanized, call for availability and pricing. * 6
SPRIN HNRS /" WI SPRINS... Type Type PRT IMNSIONS TYP R. NO. UNIT S S H-00 H-0-0 H- H- H- H-6 H-5 H-5 H-58 H-9 H-50 H-75.".0".".".6".5".5" 5.8".9".50".75".".".06".6".09".87".87" 6.9".8".8" 5.6".".0".0".88".88".88".88".88".88".88".88".88" 0." 0." 0." 0." 0." 0." 0." 0." 0.8" 0." 0." 0.0".50".50".50".50".50" 0.75" 0.75".50".50".50".50".50".50".50".5".5".5" 900X 8-6 9-8 8-8-5 8-0. lb. 0..0 0.67..7.66.8.5 0.77.9.5,000 pc.,000,000,750,500,500 500,000,750,500,07 lb.,0,00,0,05,07,90,080,65,770,00,60 Material: High quality pickled and oiled structural steel per STM specifications. Other spring hangers are available upon request. 7
STL RIT QULIZRS " WI SPRINS... The following steel fabricated equalizers are designed for the use of " wide slipper springs in a tandem or triple axle application. The equalizers are made to industry standards. Q-0 Q-55 Q- Q-5 Q-0 Q-5 NOT: enter bushing for Q-55, Q-5, Q-0 and Q-5 utilize.88" I. nylon bushing encased in a." O. x.06" I. steel tube. PRT IMNSIONS t R. NO. UNIT S S *Q-0 *Q-55 *Q-0 *Q- *Q-5 *Q-5.00".88".88".50".00".50".50".50".00" 5.9".".88" 5.9" 5.88".".6".75".75" 5.50" 5.75".75".88".88".88".88".88".88".".56".8".".8".56".56".56".56".56".56".56"."."."."."." - 55 0 -- 5 5 6.60 lb. 9.80 7.5 7.78 8.0 8.0 pc. 6 50 50 6,950 lb.,5,88,0,00,05 Material: High quality hot rolled structural steel. ll equalizers use a.88" equalizer bolt. imension t equals thickness of material. Q-0 and Q- not supplied with nylon bushing. Non-stock items. Minimum order quantities and longer lead time will apply. * 8
SPRIN HNRS " WI SPRINS... STNR UTY H H-8- / H-89- H-9- / H-95- H-08-R / H-06-R HVY UTY H H-58- / H-58- H-586- / H-586- H-585-R / H-585-R PRT H-8- H-9- H-08-R H-89- H-95- H-06-R H-58- H-586- H-585-R H-58- H-586- H-585-R IMNSIONS.5".50" 5.7" 5.00".50" 6.".56".8" 5.06".56".8" 5.06".88".50" 6.00" 5.6" 5.5" 7.06".".50" 6.00".".50" 6.00".5".06".5".5".06".5".9".".9".9".".9" 0.5" 0." 0.5" 0.5" 0." 0.5" 0.0" 0.0" 0.0" 0.0" 0.7" 0.0".00".00".00".50".50".50".50".50".50".50".50".50" 0.57".89/.90" 0.8" 0.57".89/.90" 0.8" 0.57".8/.90" 0.57" 0.57".8/.90" 0.57" H N/ N/.75".88".8".8" N/ N/.7" N/ N/.7" R. NO. 8-9- 0-8 8-9- 9-5- 0-6- 58-586- 585-58 586 585 UNIT. lb..80..8.08.76..69.78.5.. S 00 pc. 75 50 50 50 50 500 500 500 750 750 750 S,970 lb.,050,80,80,00,90,66,87,9,888,80,500 Material: High quality hot rolled structural steel. Other spring hangers are available upon request. 9
0K NRL UTY STL RIT QULIZRS.5" WI SPRINS... The following steel fabricated equalizers and spring hangers are designed for the use of.5" wide slipper springs in a tandem or triple axle application. The equalizers and hangers are made to industry standards and supplied as oiled metal. See page 9 for corresponding hanger sets. Q-5000 Q-6000 Q-LH Q-RH Q-8LH Q-8RH NOT: " O. steel bushing encased in " I. PM rubber. Q-0 Q- PRT IMNSIONS t R. NO. UNIT S S Q-5000 Q-6000 Q-LH Q-RH Q-8LH Q-8RH Q-0 Q- 5.75".75" 8.50" 8.50".6".6" 8.8".75".75".75" 5.9" 5.9" 5.9" 5.9" 5.9" 5.9" 7.00" 0.00" 7.75" 7.75" 0.88" 0.88" 7." 0.8" 7.88" 0.88" 7.06" 7.06" 0.5" 0.5" 6.75" 0.00".00".00".00".00".00".00".00".00".8".8".6".6".6".6".5".5" 0.78" 0.78" 0.77" 0.77" 0.77" 0.77" 0.75" 0.75" 0." 0." 0.5" 0.5" 0.5" 0.5" 0.0" 0.0" 5000 6000-08 -08-08 -085-0 - 0 lb. 6 8 8 5 0 0 pc. 00 6 6 0 0 5 00,600 lb.,600,8,8,67,67,05 Material: High quality hot rolled structural steel. ll equalizers use a " equalizer bolt. imension t equals thickness of material. 0
0K NRL UTY SPRIN HNRS.5" WI SPRINS... ach of the hanger sets below correspond to the steel fabricated equalizers directly opposite on page 0. H-000- H-0- H-000-R H-08--RH H-086- H-06-R H-87- PRT H-000- H-0- H-000-R H-08--LH H-08--RH H-086- H-06-R H-87- H-9- H-06-R IMNSIONS t 5.50".75" 5.50" 5.5" 5.5".8"." 5.5".5"." 8.00".9" 8.00" 7.00" 7.00" 5.88" 7.00" 6.50" 5.6" 7.00".75".".75".6".6".5".6".6".5".75" H-9-.00" 5.00".00".50".50" 5.00".50".00" 5.00".50".50".50".50".50".50".50".50".078".00" N/ 0.77" 0.77".06".5" 0.76".00".5" N/ N/ 6." N/ N/ N/ 5.56".75".75" 5.56" 0." 0." 0." 0." 0." 0.7" 0." 0.9" 0." 0." H-06-R R. NO. 000 0 000 7-08 7-08 7-086 7-085 8-7 9-0-6 UNIT.60 lb. 5.00 5.80 5.0 5.0 7. 5.8.0 5.80 5.70 S 95 pc. 95 pc. 95 pc. 50 pc. 50 pc. 50 pc. 50 pc. 0 pc. 0 pc. 0 pc. S,87 lb.,975 lb.,9 lb.,80 lb.,80 lb.,50 lb.,05 lb.,0 lb.,95 lb.,880 lb. Material: High quality hot rolled structural steel. imension equals the inside width of the part. imension t equals thickness of material.
Other Suspension asteners available upon request. SUSPNSION STNRS... PRT RIT QULIZR OLTS & NUTS SRIPTION -7-- olt, Lubed, no PH, R, Plain.7" x 7/8" 9 50 pc. 6 lb. -7--0 olt, Lubed, PH, R, Plain.7" x 7/8" 9 50pc. 6-7-5 olt, Zinc, R5, MIN " ull Thread.9" x /8" 6 5 7-6- Nut, Slotted Hex, Plain 7/8" 9 00pc. 9-6- Nut, Top Lock, Plain 7/8" 9 00 5-6-Z Nut, Top Lock, Zinc 7/8" 9 00pc. 5 -LN75 Nut, Lock, Zinc /8" 6 000pc. 6 PRT SHKL OLTS & NUTS SRIPTION -7- olt, Hex, R5, Plain x 9/6" 8 90 pc. lb. -7-Z olt, Hex, R5, Zinc x 9/6" 8 90pc. lb. -7-7 olt, Hex, R5, Plain.50" x 9/6" 8 75pc. 5 lb.. -7-7Z olt, Hex, R5, Zinc.50" x 9/6" 8 75pc. 5 lb.. -6LN olt, rilled Head, no Zerk, R5, Plain.50" x /" 6 00pc. 5 lb.. -7-6 olt, R 5, Step own Thread.90" x 7/6" 0 pc. 8 lb.. -6LN olt, Lubed, Hex, R5, Plain x 9/6" 0 pc. 5-7-6- olt, Lubed, Hex, R5, Step own Thread.0" x 7/6" 0 0pc. 7 lb.. -7-87 olt, Lubed, Hex, R5, Step own Thread.90" x 7/6" 0 60pc. 7 lb.. -6 Nut, Slotted for -6ILN /" 6 000pc. lb. -96LN Nut, Top Lock, Plain 9/6" 8 000 56-96LNZ Nut, Top Lock, Zinc 9/6" 8 000pc. 56 L SPRIN NTR OLTS PRT OX OX SRIPTION IMNSIONS -LS5 olt, Spring Retainer.5" x /8" 500 pc. 0 lb. -LS5 olt, Spring Retainer.5" x /8" 500pc. 5 -LS00 olt, Spring Retainer.00" x /8" 500 60 -LSN75 Nut, Hex for Spring Retainer olt /8" 950pc. 0 IMNSIONS IMNSIONS OX OX -6-9Z Nut, lange, Steel Zinc, No Serrations 7/6" 0 00 58 PRT MISLLNOUS STNRS SRIPTION IMNSIONS OX OX OX OX -7- Press in rake ig. Stud, R5.88" x /8" 500 pc. 6 lb. -6-058 Nut, lange Wheel, Zinc, R8 5/8" 8 50pc. -7-0X Wheel olt, Hex, Head.6" x /" 0 70pc. 5 lb.. -6-080 Wheel Nut, 60 egree, R5, Zinc /" 0 700 60-6-05 Wheel Nut, 60 egree, R5, Zinc 9/6" 8 600 7-6-76 Spindle Nut, Slot.00" 00 7-6-09 Wheel Nut, 90 egree, R8, Zinc 5/8" 8 00 -WS-80 Wheel Stud, R8, Yellow Zinc.8" x /" 0 00 -WS-0 Wheel Stud, R8, Yellow Zinc." x 9/6" 8 00 0
U-OLTS... Type Type PRT TYP TU I. SPRIN WITH THR SIZ IMNSIONS UNIT S S UR-759-8 UR-759-8 UR-759-50 UR-85- UR-8550-50 UR-865-50 UR-00650-50 UR-00700-50 UR-00700-56 UR-50800-56 UR-500900-6 US-575-56.75".75".75".8".8".8".50" 5.00".75".75".75".75"/.75"/.75"/.75"/.75"/.75"/.50"/.75" /8"-6 /8"- /"-0 7/6"-0 /"-0 /"-0 /"-0 /"-0 9/6"-8 9/6"-8 5/8"- 9/6"-8.8".8".8".".".".09".09".09".56" 5.06".06".9".9".9" 5." 5.50" 6.5" 6.50" 7.00" 7.00" 8.00" 9.00" 5.75".50" 0. lb. 0. 0.9 0.6 0.6 0.70 0.7 0.78.0.6.89 0.8,000 pc.,000 7,000 5,000,000,000,500,500 00,500,000,00 lb.,00,000,00,50 750,000,900,750 500,900 950 Material: S 08 Hot Rolled. vailable with clear or yellow chromate on zinc plate, galvanized, or stainless steel, call for availability and pricing. Letter at the end of the part number denotes course () or fine ( ) thread. See page for corresponding nuts.
MOIL HOM XL PROUTS... TRP International continues to lead the industry with a full range of mobile home axle and suspension products. SINL L SPRIN RIM LMP MULTIPL L SPRIN SPRIN HNR SPRIN ST RIN SHKL LINK UST P QULIZR U-OLT TI PLT PRT -5-70 -76 Q-0 L-689 L-68 LM-6708 LM-6700-50 SL- SL-5 H-00 H- H-6 H-5 TP-0075 SS-00 *S-98SL SRIPTION Rim lamp Single Leaf Spring Multiple Leaf Spring qualizer Inner earing one Inner earing up Outer earing one Outer earing up ust ap Shackle Link.5" Shackle Link.00" Spring Hanger." Spring Hanger.6" Spring Hanger.5" Spring Hanger xle Tube U-olt Tie Plate xle Tube Spring Seat rease Seal, Single Lip.98" Shaft S,907 pc. 0,000 6,6 6,6 6,6 6,6 60 5,000 5,000,500,500,50,50,500,500,50 See product page for complete dimensional descriptions and industry reference numbers. Non-stock items. Minimum order quantities and longer lead time will apply. *
MOIL HOM XL PROUTS... ILR HU RK RUM SPINL LTRI RK PRT *MHI-L-R *MH-L-R *K--MHL *SP-H-MH SRIPTION Idler Hub With Rim lamps nd olts rake rum With Rim lamps nd olts " lectric rake With Magnet Hot orged utt Weld Style Spindle S 60 pc. 75 5, * Non-stock items. Minimum order quantities and longer lead time will apply. 5
L SPRIN USHINS... Type PRT TYP LNTH IMNSIONS I. O. R. NO. OX OX U-506.75".50".6875" 6 00 pc. 6 lb. U-508.75".50".875", W-5 00 6 U-566.75".565".6875" 7, W- 00 6 U-568.75".565".875" 5, W- 00 6 U-56.75".565".0" 8 00 7 U-566.565".6875" 9, W- 00 8 U-87.88".5" N 78 50 7 Material: graphite impregnated nylon bove quantities are approximate, actual shipment quantity may vary. MOIL HOM RIM LMP... PRT IMNSIONS S S -5.6".6".5",907 pc.,870 lb. lso available galvanized, call for availability and pricing. * 6
SHOK SORR... PRTS KIT TOP PRTS KIT OTTOM PRT SRIPTION UNIT S S S-56867 RV Shock w/ Parts Kit.75 lb. 7 pc.,986 lb. SHOK TI PLTS... 5 ( Places) ( Places) 0.50 PRT TU I. SPRIN WITH IMNSIONS S S TP-770.8".75".9"." 5.00" 5.9".69" 0.56" 0.5",500 pc.,8 lb. TP-7709.6".8" 5.00" 5.9".69" 0.56" 0.5",500,8 SHOK MOUNTIN RKTS... PRT IMNSIONS S S ST-RKT-05.75" 0.69".05".0" 0.50",000 pc. 00 lb. ST-RKT-5.75".5" 0.69".05".0" 0.50",000 pc. 760 Material: High quality pickled and oiled structural steel per STM specifications. 7
... TruWeld-6 weld wire is an exciting new offering from TRP International. In keeping with all TRP products, TruWeld-6 delivers a high value proposition by offering very good quality at competitive pricing. We have tested it extensively and are extremely pleased with the performance. In fact, we are currently using it in our spindle manufacturing. TruWeld-6 weld wire is in stock and available for immediate shipment. WW-05-0 WW-05-0 WW-05-55 WW-05-55 Mig Weld Wire Mig Weld Wire Mig Weld Wire Mig Weld Wire 0.05" 0.05" 0.05" 0.05" 0.90 mm.0 mm 0.90 mm.0 mm Spool Spool arrel arrel lb. 55 55 60 pc. 60,80 lb.,80,0,0 Please contact your TRP Sales Representative for availability and pricing information. 8
SONRY USTOM OPRTIONS... TRP International offers numerous secondary custom operations as well as custom manufactured components through our subsidiary company and global supplier partners. STU RK LN WL RK LN SHKL LINK WITH OLTS PRSS IN MHIN TORSION RMS USTOM MNUTUR OMPONNTS... NRTOR SHTS KINPINS LVIS NT SPINLS OR TORSION RMS OR RK SPIRS TORSION SPINLS SUSPNSION LOKS Please contact your TRP Sales Representative for availability and pricing information. 9
International Supplier Partners... With over 0 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and hina we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North merica from abroad. TRP develops long term partnerships with our global supplier partners. These strong and loyal relationships are the cornerstone of our success. TRP US TRP Italy TRP hina PROUTS / MNUTURIN LOTIONS lectric rakes Hydraulic rakes Mobile Home rakes rake rums / Idler Hubs Tapered Roller earings Mobile Home Rim lamp rease Seals Leaf Springs ast qualizers abricated qualizers / Spring Hangers ust aps - Rubber Plug utt Weld Spindles / Hot orged rop Spindles / Torsion rms eijing TRP Hong Kong Shanghai 0