50 SERIES Load Capacity: 00 to lbs. Quality Features FOUR-SIDED, DOUBLE RACEWAY. Hardened steel ball bearings touch upper and lower swivel raceway on all four sides. This protects the pin from shock loading for free swiveling under heavy loads. HEAT-TREATED MOVING PARTS. All moving parts are hardened to a precise molecular depth and Rockwell hardness. This extends caster life under rugged conditions and shock loads. RACEWAY DUST CAP. Dust cap protects the raceway from contamination by dust, dirt, moisture, and other environmental debris. While standard on the 50 Series casters, these are usually not available on most competitive brands. THREAD GUARD. Thread guards keep unwanted materials out of the wheel bearings thus increasing the life of the caster. Thread guards are standard on nearly all 50 Series wheels. Light-Duty Industrial SWIVEL Sturdy light-duty casters for industrial furniture and equipment that is used frequently under demanding conditions and heavier loads. Typical Applications Include: Tool Chests Laundry Carts Options Metal Shop Equipment Maintenance Free Bearings Disk Storage Devices Utility Tables Audio/Visual Stands High-Temperature Wheels (+550 F) RIGID Cafeteria Tables Conductive Wheels Food Serving Carts Gray, Non-Marking Wheels Available in either corrosion-resistant zinc plated steel or corrosion-free Stainless Steel. Simply the toughest caster for demanding light-duty applications, Powder Coated Finishes FOUR SIDED DOUBLE BEARING RACEWAY 50 SERIES King Pin (Rivet) 3/6" Bolts Top Plate.5 Dust Cap Upper Raceway (Top Cap) Ball Bearings (ø.50 Upper Race) 4 DARNELL-ROSE division evans Industries, Inc. Ball Bearings (ø.8 Lower Race) ø.43 Yoke Retaining Washer (Reinforcing Washer) Lower Raceway (Ball Retainer) Wheel Selection EXTRA-SOFT NEOPRENE PAGE 08 PAGE 0 PAGE 4 PAGE
TOP PLATE STANDARD Slotted /4" Bolts 3-5/8" -/8" -3/8" #3 Light-Duty Industrial -5/8" to - ALTERNATES Holes for 3/6" Bolts -3/8" -/8" -5/8" " /4" Bolts -/8" -/" Holes for /4" Bolts -/8" -/" -/8" -/4" -/4" 3/6" #4 #5 (swivel only) # (swivel only) -/" -/" /4" Bolts 3-/8" 3" Slotted 5/6" Bolts 3-5/8" -/8 to 3" /4" Bolts -/" -/" -/" - #0 #0 #8 STEMS O STEM TABLE Dimension D Dimension L 3/8" 3/8" /6" /6" /6" D L -/4" -/4" -/" Stem Number L STEM TABLE Dimension T Dimension L T 3/8"-6 3/8"-6 3/8"-6 /6"-4 /6"-4 / -3 -/4" -/4" -/" O50-38- O50-38-4 O50-6- O50-6-4 O50-6- L Other stem sizes and dimensions available. S stem Special Order K stem 5/6" -/" BF stem Special Order /8" round stem /8" D 3" Dimension D ROUND SQUARE /8" /8" -/6" -/8" -/8" -/4" -/4" -3/8" -3/8" -/" -/6" -5/8" -/" - -9/6" " -5/8" - -/8".9" /8" LPC stem LP stem /6" -/" -/" -5/6" /8" square stem " and -/" only E STEM TABLE L50-386-34 L50-386- L50-386-4 L50-64- L50-64-4 L50-3- Other stem sizes and dimensions available. /6" -5/6" Stem Number - /"- -/" /"- -/" 3/8" " and -/" only Subtract.5" from overall height for stem casters. HUB HUB POLYURETHANE THERMO PLASTIC RUBBER POLYURETHANE PAGE 36 PAGE 6 PAGE 4 PAGE 8 T 5
50 SERIES continued SOCKETS R-type R-type Square PLASTIC SOCKETS FOR K STEM CASTERS Part Number Tubing I.D. Tubing I.D. Square Socket Type 4443 5" 9 3" 4444 xxx 5" Square 444 3 4" 3 3" 4485 5 3" 4 64" 4445 " /3" 4446 xxx /8" Square 44409 5/6" 9/3" 44406 5/6" 4486 xxx Square 44404 -/6" Members of: UNDERWRITERS LABORATORY INSTITUTE OF CASTER MANUFACTURERS 6 DARNELL-ROSE division evans Industries, Inc. NATIONAL SANITATION FOUNDATION
BRAKES Wheel Lock Brake (WL) Free Lock Wheel Lock Brake This simple, but effective nylon wheel lock is designed especially for light duty institutional market. (ie. hospitals, schools, offices, etc.) Most effective on casters with soft wheels. Requires only a slight pressure downward to engage the wheel lock and an equally slight pressure upwards to disengage it. Light-Duty Industrial For ", -/", 3", 4", and 5". Radial Brake (RB) Radial Brake Free Lock Exceptional brake for light and medium duty applications, either industrial or institutional. Side pedal engages tread lock to restrain wheel movement. Brake kit available for field installation. For 3", 4" and 5" only. Combination & Wheel Brake (CB) Combination & Wheel Brake Open Brake & Lock This foot lever operated combination swivel lock and wheel brake maintains the same height whether the brake is engaged or in the released position. Also, the same height is maintained when used with its companion casters as the swivel or rigid. For easy operation by simply stepping on the foot lever in the high position and reversing the action to release the brake to a free rolling position. For 3", 4" and 5" only. Diameter Tread Width Load Capacity Wheel Material Bearing Part Number Rigid Part Number 00 5 50 Overall Height -/8-3/6 Approx. Weight POLYURETHANE / STEEL HUB DELRIN 5-3-PDN 5-3-XDN 5-3-PKN 5-3-XKN 5-3-PDN-RD 5-3-PH 5-3-PH-RD 5-3-XH 5-3-PKN-RD 5-3-BCI 5-3-BPO 5-3-XADI-M-CI 5-3-DADI-M-CI 5-3-PRDN 5-3-XRDN 5-3-PRKN 5-3-XRKN 5-3-PRDN-RD 5-3-PRH 5-3-PRH-RD 5-3-XRH 5-3-PRKN-RD 5-3-BRCI 5-3-BRPO 5-3-XRADI-M-CI 5-3-DRADI-M-CI -3/8 -/4
50 Series Diameter Tread Width Load Capacity Wheel Material Bearing Part Number Rigid Part Number 6 5 3 6 5 4 40 8 6 5 5 0 5 65 0 35 65 85 00 EXTRA SOFT 50 POLYURETHANE / HUB 0 5 85 0 35 85 Overall Height 3-5/8 0 65 Approx. Weight 5 /-3-PDN 5 /-3-XDN 5 /-3-PKN 5 /-3-XKN 5 /-3-BCI 5 /-3-PH 5 /-3-XH 53-3-PEZN-RD 53-3-XEZN-RD 53-3-PDN-RD 53-3-XDN-RD 53-3-PH-RD 53-3-XH-RD 53-3-PDN 53-3-XDN 53-3-PKN 53-3-XKN 53-3-PH 53-3-XH 53-3-BPO 5 /-3-PRDN 5 /-3-XRDN 5 /-3-PRKN 5 /-3-XRKN 5 /-3-BRCI 5 /-3-PRH 5 /-3-XRH 53-3-PREZN-RD 53-3-XREZN-RD 53-3-PRDN-RD 53-3-XRDN-RD 53-3-PRH-RD 53-3-XRH-RD 53-3-PRDN 53-3-XRDN 53-3-PRKN 53-3-XRKN 53-3-PRH 53-3-XRH 53-3-BRPO 53-3-BCI 53-3-BRCI 53-3-XPD-M-PO-55 53-3-BPD-M-PO-55 53-3-XPD-M-PO 53-3-BPD-M-PO 53-3-XADI-M-PO 53-3-BADI-M-PO 54-3-PEZN-RD 54-3-XEZN-RD 54-3-PDN-RD 54-3-XDN-RD 54-3-PH-RD 54-3-XH-RD 54-3-PDN 54-3-XDN 54-3-PKN 54-3-XKN 54-3-PH 54-3-XH 54-3-BPO 54-3-BCI 54-3-XPD-M-PO-55 54-3-BPD-M-PO-55 54-3-XPD-M-PO 54-3-BPD-M-PO 54-3-XADI-M-PO 54-3-BADI-M-PO 55-3-PEZN-RD 55-3-XEZN-RD 55-3-PDN-RD 55-3-XDN-RD 55-3-PH-RD 55-3-XH-RD 55-3-PDN 55-3-XDN 55-3-PKN 55-3-XKN 55-3-PH 55-3-XH 53-3-XRPD-M-PO-55 53-3-BRPD-M-PO-55 53-3-XRPD-M-PO 53-3-BRPD-M-PO 53-3-XRADI-M-PO 53-3-BRADI-M-PO 54-3-PREZN-RD 54-3-XREZN-RD 54-3-PRDN-RD 54-3-XRDN-RD 54-3-PRH-RD 54-3-XRH-RD 54-3-PRDN 54-3-XRDN 54-3-PRKN 54-3-XRKN 54-3-PRH 54-3-XRH 54-3-BRPO 54-3-BRCI 54-3-XRPD-M-PO-55 54-3-BRPD-M-PO-55 54-3-XRPD-M-PO 54-3-BRPD-M-PO 54-3-XRADI-M-PO 54-3-BRADI-M-PO 55-3-PREZN-RD 55-3-XREZN-RD 55-3-PRDN-RD 55-3-XRDN-RD 55-3-PRH-RD 55-3-XRH-RD 55-3-PRDN 55-3-XRDN 55-3-PRKN 55-3-XRKN 55-3-PRH 55-3-XRH 0 EXTRA SOFT 60 POLYURETHANE / HUB 0 5 85 0 35 65 85 55-3-BPO 55-3-BRPO 0 EXTRA SOFT 0 POLYURETHANE / HUB 55-3-BCI 55-3-XPD-M-PO-55 55-3-BPD-M-PO-55 55-3-XPD-M-PO 55-3-BPD-M-PO 55-3-XADI-M-PO 55-3-BADI-M-PO 55-3-BRCI 55-3-XRPD-M-PO-55 55-3-BRPD-M-PO-55 55-3-XRPD-M-PO 55-3-BRPD-M-PO 55-3-XRADI-M-PO 55-3-BRADI-M-PO -/8 -/6 -/8-3/6 -/8 4-/8 -/4 -/8-9/6-3/4-9/6 5-/8 3-3/8 6-/8 3-/8-3/4-5/6-9/6-5/6-3/4
50 Diameter Tread Width 3 6 5 4 6 5 5 6 5 SERIES Stainless Steel Load Capacity Wheel Material Bearing Part Number Rigid Part Number 53-3-PDN-SS 53-3-PRDN-SS 53-3-PKN-SS 53-3-PRKN-SS 53-3-PH-SS 0 35 65 0 5 00 50 85 0 65 85 5 0 60 0 65 85 5 0 0 Approx. Weight Overall Height 4-/8 -/8 5-/8 3-3/8 STAINLESS STEEL -3/6 53-3-PRH-SS 53-3-BSS-SS 53-3-PEZN-RD-SS 53-3-PREZN-RD-SS 53-3-PDN-RD-SS 53-3-PRDN-RD-SS EXTRA SOFT 53-3-BPD-M-PO-55-SS 53-3-BRPD-M-PO-55-SS 53-3-BPD-M-PO-SS 53-3-BRPD-M-PO-SS 53-3-BPO-SS 53-3-BRPO-SS -3/6 POLYURETHANE / HUB 53-3-BADI-M-PO-SS 53-3-BRADI-M-PO-SS -/4 54-3-PDN-SS 54-3-PRDN-SS 54-3-PH-SS 54-3-PRH-SS 54-3-BPO-SS 54-3-BRPO-SS -5/6 STAINLESS STEEL 54-3-BSS-SS 54-3-BRSS-SS 5-/ 54-3-PDN-RD-SS 54-3-PRDN-RD-SS -3/4 EXTRA SOFT 54-3-BPD-M-PO-55-SS 54-3-BRPD-M-PO-55-SS 54-3-BPD-M-PO-SS 54-3-BRPD-M-PO-SS POLYURETHANE / HUB 54-3-BADI-M-PO-SS 54-3-BRADI-M-PO-SS 55-3-PDN-SS 55-3-PRDN-SS 55-3-PH-SS 55-3-PRH-SS 55-3-BPO-SS 55-3-BRPO-SS STAINLESS STEEL 55-3-BSS-SS 55-3-BRSS-SS 55-3-PDN-RD-SS 55-3-PRDN-RD-SS EXTRA SOFT 55-3-BPD-M-PO-55-SS 55-3-BRPD-M-PO-55-SS 55-3-BPD-M-PO-SS 55-3-BRPD-M-PO-SS POLYURETHANE / HUB 55-3-BADI-M-PO-SS 55-3-BRADI-M-PO-SS 53-3-BRSS-SS 3-/ -3/6 -/4-3/4-5/6 6-/8 8-/4 6-/8 6-/8-3/4 6-/4 3-/8 9 Designed to provide the ultimate CORROSION PROTECTION These casters are ideally suited for acetic, nitric and citric acid environments in addition to being will suited for organic and inorganic chemicals, dye stuffs, crude and refined oil environments. Widely accepted in the following industries: DAIRY BEVERAGE FOOD PROCESSING PHARMACEUTICALS HOSPITALS & MEDICAL ANIMAL CAGES Made with non-magnetic, 303/304 stainless steel.