Machine Shop Labour Guide Langley Machine Shop 20121 Industrial Avenue, Unit 101 Langley, BC V3A 4K6 Phone: 604-530-3943 Contact: Ron Croteau Email: lordco11@lordco.com Mission Head Shop 32885 London Avenue Mission, BC V2V 6M7 Phone: 604-826-6529 Contact: Gary Swan Email: missionshop@lordco.com Maple Ridge Machine Shop 11969-228th Street Maple Ridge, BC V2X 6M1 Phone: 604-467-3444 Contact: Ron Adams Email: lordco3@lordco.com Mision Machine Shop 32885 London Avenue Mission, BC V2V 6M7 Phone: 604-826-4362 Contact: Lorne Smith Email: missionshop@lordco.com
Track Record Lordco has a proven track record you can trust. We are one of the largest and most modern Automotive Machine Shops in B.C. We have three custom machine shops, and one cylinder head remanufacturing plant to serve our customers. We are proud to have state-of-the-art machinery operated by competent personnel. We produce quality work at a competitive price. Quality At Lordco, quality is more than a slogan. It is a direct result of our ongoing commitment to quality control with our B.C. Certified Journeyman Automotive Machinists. Environmental Policy Statement Lordco is strongly committed to the preservation of our environment. First, all manufacturing oils and solvents are recycled for re-use in B.C. Second, Lordco is a Government Certified waste generator that fully co-operates in the provincally regulated program for the dispersal of all toxic wastes and by-products produced by machine shops in the manufacturing process. This is our guarantee that all of Lordco s wastes are dealt with in an environmentally conscious manner.
INDEX Service/Checking Charge...3 Minimum Labour Charge...3 Overtime Charge...3 Operations Not Covered in Schedule...3 Toxic Goods Disposal Fee...3 Shop Supplies...3 Goods Left Over 30 Days...3 Machine Shop Operations Price List...4-10 Complete Valve Operations...4 Valve Guide Work...4 Integral Guide Installation...4 Valve Seat Installation...5 Resurfacing...5 Pressure Testing...5 Cylinder Head Work...6 Cleaning Parts Hot Tank & Spraywasher...6 Cylinder Reboring (includes Finish Honing)...6 Cylinder Sleeve Installation...7 Connecting Rods (Resizing)...7 Pin Fitting and Rod Aligning...7 Press Fit Piston Pins...7 Align Honing Blocks...7 Align Boring Blocks...8 Crack Detection - Magnaflux Inspections...8 Cam Bearing Installation...8 King Pin Fitting...8 Engine Balancing...8 Crankshaft Welding...8 Crankshaft Grinding...9 Brake Drum & Rotor Turning...9 Hydraulic Press Work...9 Flywheel Grinding...10 Flywheel Gear Installation...10 Thread Repairs... 10
SERVICE/CHECKING CHARGE: For going to customers locations and return, charge one (1) hour minimum, plus costs per kilometer traveled. MINIMUM LABOUR CHARGE: Minimum charge for labour on work done in shop should be one half (1/2) hour. OVERTIME CHARGE: When work requested by customer must be performed outside normal working hours, charge one and a half (1-1/2) times normal rate. OPERATIONS NOT COVERED IN SCHEDULE: Charge hourly rate. Time spent removing parts, fittings, etc., in order to perform the operations scheduled or time spent by machinist waiting for this work to be done, should be charged at the hourly rate. TOXIC GOODS DISPOSAL FEE: Due to the use of toxic chemicals in the cleaning processes as well as the aftermath of all machine processes, a waste stream of chemicals, oils, greases, and heavy metals is generated. In order to dispose of these in an environmentally friendly manner it is necessary for us to charge the customer (originator) a fee to assist in the safe disposal of this waste stream. All invoices will be charged 5% on the labour portion only to assist in the safe disposal of these items. SHOP SUPPLIES A 3% shop supply fee will be charged to cover material used for operations GOODS LEFT OVER 30 DAYS Lordco can not be responsible for any goods left over 30 days. Page 3
MACHINE SHOP OPERATIONS PRICE LIST SHOP RATE $100.00 PER HOUR COMPLETE VALVE OPERATIONS - (parts extra) 4 Cylinder OHV (V6/V8) Adjustable Valve...$135.00 4 Cylinder VW Rabbit Type 8 V Head (re & re cam extra)...$150.00 4 Cylinder OHV (V8) Non-adjustable Valve...$145.00 4 Cylinder 8 Valve Cylinder Head (aluminum)...$150.00 4 Cylinder 12 Valve Cylinder Head (aluminum)...$185.00 4 Cylinder 16 Valve Cylinder Head (aluminum)...$295.00 4 Cylinder Diesel Light Duty Cylinder Head (6.9, 7.3, etc.)...$225.00 6 Cylinder Diesel Light Duty Cylinder Head...$285.00 Cummins 5.9-2 Valve/Cylinder...$395.00 6 Cylinder OHV Passenger Head...$185.00 6 Cylinder OHV Passenger Head (non-adjustable head)...$195.00 6 Cylinder 24 Valve Cylinder Head...$450.00 V8 32 Valve...$450.00 V8 OHV Truck (Heavy Duty) Gas Engine...$225.00 Harley Davidson Cylinder Head...$100.00 Valve Adjustments on OHC Cylinder Head... Time Basis ** Prices do not include Re & Re of Camshafts, Rockers, or Valve Adjustments VALVE GUIDE WORK Knurl Guides and Fit to Size... $6.00 each Re & Re Guide and Fit to Valve Stem (cast iron)... $7.50 each Re & Re Guide in Aluminum Head and Fit to Valve Stem... $9.75 each Hone Guides with Sunnen Guide Hone... Time Basis ** Plus Guides INTEGRAL GUIDE INSTALLATION Machine and Install Valve Guides plus cost of Guide 4 Guides...$40.00 8 Guides...$80.00 12 Guides...$120.00 16 Guides...$160.00 Page 4
VALVE SEAT INSTALLATION Install 1 Valve Seat...$30.00 Install Valve Seat - 2 or more each...$20.00 Install Valve Seat - 8 or more each...$16.25 ** Plus 20% for Canted Valves ** Plus 50% for Aluminum Head ** Price does not include price of valve seat or valve seat angle reface RESURFACING 3, 4, V6, V8 Cylinder Automotive Heads (each)...$75.00 6 Cylinder Cast Iron Cylinder Head...$85.00 6 Cylinder Aluminum Cylinder Head...$85.00 4 Cylinder Diesel LD - Light Duty...$90.00 4 Cylinder Diesel - Light Duty with Precups...$135.00 4 Cylinder Diesel HD - Heavy Duty...$150.00 6 Cylinder Diesel LD - Light Duty...$200.00 6 Cylinder Diesel HD - Heavy Duty...P.O.A To Remove.025 -.040...Plus 50% To Remove.040 -.080...Plus 100% Angle Milling... Time Basis Resurface Exhaust Manifold (belt resurface)...$47.50 Resurface Exhaust Manifold (surface grind)...$87.50 Resurface 2 Piece 6 Cylinder Manifold...$150.00 Resurface V8 Intake Manifold... Time Basis Cylinder Block Surface Grinding V8...$175.00 Cylinder Block Surface Grinding 4 Cylinder... $110.00 Cylinder Block Surface Grinding 6 Cylinder...$125.00 Thermal Straightening of Aluminum OHC Cylinder Head (4 or 8 Cylinder)... Time Basis ** Prices may vary on certain applications PRESSURE TESTING Passenger Car Cylinder Heads 4 Cylinder...$80.00 Passenger Car Cylinder Heads 6 Cylinder Inline...$95.00 ** Heads must be oil free ** Prices can vary on certain applications Page 5
CYLINDER HEAD WORK Reface Valves...$8.00 Reface Valve Seats...$12.00 Re & Re Rocker Studs... Time Basis Machine for Positive Valve Stem Seals... Time Basis Machine Seats for Oversized Valves... $18.00 each Install Screw in Studs V8 (each head)...$145.00 ** Plus parts CLEANING PARTS HOT TANK & SPRAYWASHER Prices are for parts ready for cleaning cam bearings, frost plugs, etc. Already removed. Stripping of these items charged additionally at shop rates. Complete Engine 4 Cylinder...$175.00 Complete Engine 6 Cylinder...$200.00 Complete Engine 8 Cylinder...$250.00 Passenger Car or Light Truck Blocks...$95.00 Large Blocks...$150.00 Passenger Cars Cylinder Heads (4 Cyl/V6/V8)...$50.00 Inline Six...$65.00 Intake Manifolds (V8 Cast Iron)...$85.00 Intake Manifolds (Others)... Time Basis Large Heads (Diesel)... Time Basis Glass Bead Intake Manifold (Included Jet Wash)...$95.00 CYLINDER REBORING (INCLUDES FINISH HONING) (Aluminum Bores - +100% regular costs) Standard finishing does not include plateau finishes Under 2 5/8 Bore...$40.00 per hole 4 Cylinder & V6 up to 4.00 in diameter...$40.00 per hole 6 Cylinder & V8 up to 4 1/8 in diameter...$35.00 per hole 8 Cylinder & V8 over 4 1/8 in diameter...$30.00 per hole Deglaze Cylinder only...$15.00 per hole Reboring Motorcycle Cylinder...$75.00 per hole Reboring to Exceptional Oversize...Plus 50% Boring & Honing with Torque Plates... Add $100.00 Stripping blocks of Head Studs, Valves, Gears, etc.... Shop hourly rate Volkswagen VR6 Boring...$250.00 Page 6
CYLINDER SLEEVE INSTALLATION Per Cylinder 1 or 2 Sleeves installed... $150.00 each Per Cylinder 3 or more... $125.00 each Counterbore Block... $25.00 each Sleeve 6.9-7.3 IHC Block (plus sleeves)...$850.00 Counterbore (when sleeving)... $25.00 each ** Discounts available on multiple sleeve installations. ** These prices include Boring the Block. Installing Sleeve and Boring the Sleeve to Finish Size. This does NOT include the price of the Sleeve. CONNECTING RODS (RESIZING) Resize 1 Connecting Rod only...$40.00 Passenger Car Connecting Rods (in sets of 4)... $20.00 each Passenger Car Connecting Rods (in sets of 6-8)... $18.00 each Medium Duty Truck Connecting Rods (Gasoline in sets)... $30.00 each Diesel Connecting Rods (light duty in sets to 3.0 housing)... $35.00 each Shot Peen Connecting Rods (sets)...$45.00 PIN FITTING AND ROD ALIGNING (Does NOT include bushings) Single Pin up to 1 diameter...$40.00 4 Cylinder Set... $20.00 each 6 Cylinder Set... $20.00 each 8 Cylinder Set... $18.00 each Heavy Duty or Diesel Connecting Rods... Time Basis P.O.A. PRESS FIT PISTON PINS Dismantle, Fit to New Pistons & Align Rods 1 Only...$35.00 From 2-4... $18.00 each 5 & up... $12.75 each ALIGN HONING BLOCKS 4 Cylinder/V6/V8 Blocks to 3 1/2 diameter housings...$250.00 6 Cylinder Inline Blocks (passenger car)...$275.00 3 1/2-4.0 Housings...$300.00 Resize main line only (no cap cutting)...$135.00 Cap to Block Fitting (extra)... Time Basis Page 7
ALIGN BORING BLOCKS Align Boring Blocks...P.O.A. CRACK DETECTION - MAGNAFLUX INSPECTIONS Automotive Crankshafts...$40.00 Industrial Crankshafts...P.O.A. Connecting Rods (Automotive)... $8.75 each Cylinder Heads 4 Cylinder (V6 & V8)...$37.00 Cylinder Heads 6 Cylinder (Straight 6)...$40.00 Passenger Car Blocks...$75.00 Individual Parts...P.O.A. ** Degreasing of parts is mandatory and is charged separately. CAM BEARING INSTALLATION Re & Re Cam Bearings (sets)... $13.50 each 60 Degree V6 Blocks... $19.75 each ** Labour only - cam bearings extra KING PIN FITTING Fit Pins only...$40.00 Rebush & Fit up to 1 diameter...$75.00 Rebush & Fit over 1 diameter...$75.00 Stepped Type Bushing... Time Basis ENGINE BALANCING - (Mallory extra) 4 Cylinder...$275.00 6 Cylinder...$300.00 V6...$325.00 V8...$325.00 Flywheel Balancing...$75.00 CRANKSHAFT WELDING (No Warranty) Sublet...P.O.A. Page 8
CRANKSHAFT GRINDING 4 Cylinder V8 Passenger & Light Truck...$165.00 6 Cylinder with 4 Mains...$195.00 6 Cylinder with 7 Mains...$195.00 Ford (IHC) 6.9-7.3 litre...$250.00 V8 400CID Chev to 350 Block (383)...$350.00 4 Cylinder Diesel (small)...$295.00 6 Cylinder Diesel...$475.00 V8 Diesel (large 4 cylinder)...$425.00 Grinding 1 Journal or Welded Thrust...$125.00 Grind Crankshaft Thrust Faces for Oversize Bearing...$55.00 Polish Crankshaft (passenger or light truck)...$65.00 Polish Large Crankshaft...P.O.A. ** Does not include Re & Re Counterweights, or gallery plugs or magnaflux inspections etc. BRAKE DRUM & ROTOR TURNING Up to 11 diameter...$18.00 Over 11 to 13 diameter...$28.00 Over 13 to 16 diameter...$38.00 Any Drum 4 wide or wider (per inch width)...$12.00 Turn Backing Plates on Electric Brakes...$35.00 Passenger Car Brake Rotors...$21.00 Brake Rotors without Hubs (composite)...$30.00 Truck Brake Rotors/Motorhome...$55.00 Grinding Brake Drum (additional)...$10.00 HYDRAULIC PRESS WORK Re & Re Axle Bearing...$55.00 Re & Re Axle Bearings with Backing Plate...$85.00 Re & Re Universal Joints...$40.00 Constant Velocity Joints... Time Basis Re & Re FWD Wheel Bearing...$65.00 All other work... Time Basis ** We will not be responsible for DAMAGE to parts on press work. Page 9
FLYWHEEL GRINDING All Flat Flywheels (Automotive)...$45.00 All Stepped Flywheels (Automotive)...$50.00 Volkswagen Rabbit Flywheels...$75.00 Re & Re Flywheel Dowel Pins... $3.50 each Truck Flat...$75.00 Transport Truck (Flat)...$95.00 Transport Truck (Stepped)...$125.00 FLYWHEEL GEAR INSTALLATION Re & Re Ring Gear...$30.00 THREAD REPAIRS Helicoil... Time Basis Page 10
...NOTES...