ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore size changed to suit uses, achieving greater weight reduction. 11.3 kg S1 S eight omparison (asic Type ø-1st) 35 3 eight (kg) 5 1 5 7. 11.3 S1 S Standard 58% Reduction 3.1 13.1 57% Reduction S1 S Double Rod Type S1 Standard S Maximum stroke when using rotating bracket Expanded by 1.6 times (compared to series S1) ighter cylinder reduces self-weight deflection. Stroke range extended to widen use. Series Expanded E Double Rod Type, Smooth ylinder added to Series S! 9 Made to Order types added! Mounting angle 1.6 times Maximum allowable stroke when using clevis bracket Stroke 1, 1, 1, Series S S1 Mounting angle 45 6 41 S S1 3 45 6 9 Mounting angle (DE.) Double Rod Type llowable lateral load equal to Series S1 Even if rod diameter is changed to suit various needs, function remains equal to Series S1. Series S llowable lateral load of S1 and S llowable lateral load () 3 1 15& 8 1 Stroke Smooth ylinder T.ES-196 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder Series S Improved operability after installation Operability has been improved by placing the piping port and cushion valve operation position on the same side. ompact auto switches can be mounted -color display auto switches can be mounted, enabling precise determination of mounting position, without error. Interchangeability with Series S1 ylinder mounting dimensions and rod end thread sizes are interchangeable with Series S1. ushion seals are now replaceable Maintenance improved by making cushion seals replaceable. Smooth ylinder Minimum operating pressure.5 MPa Realize stable, low speed operation at even 5 mm/s Series Variations Series ction Type Standard variations ith rod boot opper-free ore size Made to Order P. Standard S P. Smooth ylinder SY E Double acting Double acting Single rod E Double rod Single rod 15 hange of rod end shape E Special port positions hange of trunnion bracket mounting position hange of tie-rod length Double clevis pin and double knuckle pin with split pin and flat washer Double clevis pin and double knuckle pin made of stainless steel Rod side trunnion mounted on the front of the rod cover Made of stainless steel (Piston rod is hard chrome plated) ith rod end bracket eature 1 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ombination of Standard Products and Made to Order Specifications Series S : Standard : Made to Order specifications : Special product (ontact SM for details) : ot available Standard DS S - - -X -X5 -X6 -X7 -X9 -X3 -X4 -X5 -X6 -X7 -X8 -X9 -X1 -X11 -X1 -X14 -X -X -X6 -X7 -X3 -X35 -X39 -X -X -X68 -X86 Series ction/type Specification pplicable bore size Standard uilt-in magnet ø15 to ø ith rod boot opper and luorine-free hange of rod end shape Oversized rod cylinder eat-resistant cylinder ( 1 to ) old-resistant cylinder ow speed cylinder (5 to mm/s) Special port position ith heavy duty scraper eat resistant cylinder ( to 11 ) Made of stainless steel Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder ø15 to ø hange of trunnion bracket mounting position hange of tie-rod length luororubber seal Double clevis pin/double knuckle pin with split pin and flat washer Double clevis pin and double knuckle pin made of stainless steel Rod side trunnion mounted on the front of the rod cover ith coil scraper Special trunnion bearing levis hole with bushing nuckle fixed with nut Made of stainless steel (ith hard chrome plated piston rod) ith rod end bracket S (Standard) Double acting Single rod Double rod on-lube ø15 to ø SY (Smooth ylinder) Double acting Single rod on-lube ø15 to ø asic Double Rod Type Smooth ylinder uto Switch Made to Order ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 1
ir ylinder Series S ø15, ø, ø ith auto switch ith auto switch (uilt-in magnet) S DS D T Mounting asic oot Rod flange ead flange Single clevis Double clevis enter trunnion 15 uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DS15-15 15 15 mm mm mm thread type il T T ow to Order Rc PT 3 3 M9 il 3 S n uto switch il ylinder stroke Refer to the next page for the Maximum Stroke table. pplicable uto Switches / or detailed auto switch specifications, refer to est Pneumatics o.. Type Solid state switch Reed switch Special function Diagnostic indication (-color indication) ater resistant (-color indication) Diagnostic indication (-color indication) Diagnostic indication (-color indication) Electrical entry rommet Terminal conduit rommet Indicator light Yes Yes rommet o Yes o Terminal conduit Yes DI terminal rommet iring (Output) 3-wire (P) 3-wire (PP) -wire 3-wire (P) -wire 3-wire (P) 3-wire (PP) -wire 3-wire (P) 3-wire (PP) -wire 4-wire (P) 3-wire (P equivalent) -wire ead wire length symbols:.5 m il (Example) M9 1 m M (Example) M9M 3 m (Example) M9 5 m Z (Example) M9Z oad voltage Made to Order or details, refer to the next page. umber of auto switches pcs. 3 pcs. 1 pc. n pcs. ithout auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot il one ylon tarpaulin eat resistant tarpaulin ith air cushions on both sides only. uto switch model ead wire length (m) Pre-wired connector Tie-rod and.5 1 3 5 D mounting mounting (il) (M) () (Z) M9 5 V, 1 V 4 V M9P 1 V M9 1 V, V 51 5 V, 1 V 39 1 V 39 M9 5 V, 1 V M9P 4 V 1 V M9 M9 5 V, 1 V M9P 1 V M9 5 V, 1 V 59 5 V 96 1 V 1 V 93 5 V, 1 V 1 V or less 9 1 V, V 54 V or less 64 4 V 1 V 33 34 1 V, V 44 59 Solid state auto switches marked with are produced upon receipt of order. Since there are applicable auto switches other than listed, refer to page 3 for details. or details about auto switches with pre-wired connector, refer to est Pneumatics o.. D-9, M9, M9, M9 are shipped together (but not assembled). (Only auto switch mounting bracket is assembled at the time of shipment.) pplicable load I circuit I circuit I circuit I circuit I circuit I circuit ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com I circuit Relay, P Relay, P P Relay, P
ir ylinder Series S Specifications IS Double acting Made to Order Specifications (or details, refer to pages 5 to 9.) Specifications -X hange of rod end shape -X3 Special port position -X14 hange of trunnion bracket mounting position -X hange of tie-rod length Double clevis pin/double knuckle pin with -X6 split pin and flat washer Double clevis pin and double knuckle pin -X7 made of stainless steel Rod side trunnion mounted on the front -X3 of the rod cover Made of stainless steel -X68 (ith hard chrome plated piston rod) -X86 ith rod end bracket Rod oot Material Material Max. ambient temperature ylon tarpaulin eat resistant tarpaulin 7 11 Maximum ambient temperature for the rod boot itself. or the specifications of cylinders with autoswitch, please refer to pages 1 to 4. Minimum stroke for auto switch mounting uto switch proper mounting position (detection at stroke end) and its mounting height Operating range uto switch mounting bracket part no. 15 ction luid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion mbient and fluid temperature ubrication Double acting, Single rod ir 1.57 MPa.97 MPa.5 MPa to mm/s ir cushion ot required (on-lube) ithout auto switch to 7 (o freezing) ith auto switch to 6 (o freezing) Stroke length tolerance Stroke or less 51 to 1 11 to 1 to Tolerance +1. +1.4 +1.8 +. Mounting asic, oot, Rod flange, ead flange, Single clevis, Double clevis, enter trunnion Maximum Stroke 15 Mounting bracket ccessory Mounting Maximum stroke asic, ead flange, Single clevis, Double clevis, oot, Rod flange enter trunnion asic 1 or less 1 or less oot Rod flange ead flange Single clevis or less Double clevis 15 oot lange Single clevis Double clevis S-1 S-1 S-1 S-D1 S-14 S-14 S-14 S-D14 S-16 S-16 S-16 S-D16 Order two foot brackets per cylinder. hen ordering the double clevis style, the clevis pin and split pins are included as accessories. enter trunnion Standard equipment levis pin Rod end nut Single knuckle joint Option Double knuckle joint (nuckle pin, Split pin) Rod boot If using the rod end nut with a single knuckle joint or a double knuckle joint, use the type with rod end bracket (-X86) or refer to page 11. Mounting racket Part o. asic Double Rod Type Smooth ylinder uto Switch Made to Order ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 3
Series S eight asic weight dditional weight with magnet (ith built-in magnet and auto switch) dditional mass per each 1 mm of stroke ccessory bracket asic oot Rod flange ead flange Single clevis Double clevis Trunnion Single knuckle Double knuckle (ith nuckle pin, Split pin) Rod end nut alculation: (Example) S- asic weight 1.45 (kg) dditional weight.3 (kg/1 mm) ylinder stroke 1.45 +.3 x /1 = 3.6 (kg) 15 5.46 7.49 8.51 8.51 8.53 8.99 9.59.7 1.55.91 1.37.16 Theoretical Output / Double cting 6. 9. 1.3 1.3 1.79 11.54 1.3.7 1.67 1.16 1.81.16 9.7 1.45.8.8 14.56.41..8.3 1.56.48.3 (kg) arning 1. Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber may cause damage.. Do not open the cushion valve beyond the stopper. s a retaining mechanism for the cushion valve, retaining ring is installed, and the cushion valve should not be opened beyond that point. If not operated in accordance with the above precautions, the cushion valve may be ejected from the cover when air pressure is supplied. 3. Use the air cushion at the end of cylinder stroke. aution 1. Regarding the installation of a knuckle joint Please contact SM if a knuckle joint must be installed on the piston rod by using the rod end nut.. Regarding the screw-in of fittings when piping hen ports and fittings are screwed in, tighten them with the proper tightening torque below. 15, onnecting thread nominal size 1/ 3/4 Proper tightening torque m 8 to 3 3. Do not deform cushion rings when removing and assembling. ushion rings are press molded products. If a cushion ring bumps with something when removing and assembling, the air cushion may not function properly due to cushion ring deformation. 15 Rod size 3 Operating direction OUT I Piston area (mm ) 13 1 OUT I Unit: Operating pressure (MPa)..3.4.5.6.7.8.9 1. 46 369 49 6 738 861 111 13 3 34 46 57 69 8 9 1 1 3 OUT I 146 38 9 46 438 6 58 77 73 9 876 18 1 13 1 139 131 146 38 OUT I 1 19 38 63 57 8 76 11 9 11 1 141 133 161 181 1 1 19 4 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder Series S Relation between ylinder Size and Maximum Stroke The below table shows the applicable maximum stroke (in cm units), found by calculation assuming the case where the force generated by the cylinder itself acts as buckling force on the piston rod, or piston rod and cylinder tube. Therefore, it is possible to find the applicable maximum stroke for each cylinder size using the relationship between the size of the operating pressure and the cylinder support type, regardless of the load ratio. [Reference] If it is stopped with the external stopper on the cylinder extension side, even with a light load, the maximum generated force of the cylinder will act on the cylinder itself. Mounting Support bracket nominal symbol and schematic diagram oot: oot: Rod flange: Rod flange: ead flange: levis:, D oot: Rod flange: enter trunnion: T ead flange: ead flange: ominal symbol,, D T,, Operating pressure (MPa).3.5.7.3.5.7.3.5.7.3.5.7.3.5.7.3.5.7.3.5.7 pplicable max. stroke according to buckling strength (cm) 15 13 79 66 45 33 6 96 59 135 11 84 31 31 193 144 19 9 433 334 81 9 7 58 38 7 83 61 119 89 74 67 7 16 94 78 386 97 P 113 86 7 34 7 16 76 6 1 111 91 33 53 1 6 118 97 6 367 39 (cm) asic Double Rod Type Smooth ylinder uto Switch Made to Order.3 1 185 9.5 141 5.7 134 1 19 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 5
Series S onstruction!9!5!!6 yqui!7 @ t e o r!8!4!3 @1! w!1 omponent Parts o. Description Material 1 3 4 5 6 7 8 9 1 11 1 13 14 Rod cover ead cover ylinder tube Piston Piston rod ushing Tie-rod Tie-rod nut ushion ring ushion valve Piston nut lat washer ear ring Magnet Retaining ring luminum die-cast luminum die-cast luminum alloy luminum alloy arbon steel Oil-impregnated sintered alloy arbon steel Rolled steel Stainless steel Rolled steel arbon steel arbon steel Resin Spring steel uilt-in magnet type with auto switch ote hromated hromated ard anodized hromated ard chrome plated Zinc chromated ickel plated ickel plated ickel plated ickel plated Phosphate coated omponent Parts o. Description 16 Rod seal ushion seal 18 Piston seal 19 Valve seal Tube gasket 1 Piston gasket Material R Urethane R R R R ote Replacement Parts: Seal it it no. ontent 15 S-15-PS Set of nos. S--PS above!6,!7,!8, @. S--PS Seal kit includes a grease pack ( g). Order with the following part number when only the grease pack is needed. rease pack part number: R-S-1 (1 g), R-S- ( g) 6 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder Series S Dimensions asic: S ith rod boot øe øe 15 15 h + l l f ZZ1 + l + Stroke Stroke range Up to 1 Up to 1 Up to 1 3.5 3.5 34.5 l h + l P 1/ 1/ 3/4 f 56 ZZ1 + l + Stroke idth across flats S 16 53 143 7 7 ithout rod boot ZZ 11 35 11 35 1 56.5 idth across flats 1 18 144 e T Y D 3 3 38 f X E 78.5 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. oot: S ith rod boot x P (Rc, PT, ) ZZ + Stroke 43 43 4 x P (Rc, PT, ) S + Stroke 18 ith rod boot h l 133 1 /5 stroke 133 1 /5 stroke 141 1 /5 stroke S + Stroke S + Stroke ZZ + Stroke M16 x 1.5 ZZ1 58 58 77.5 V M 4 x X Y Y V 4 x ushion valve 7 7 34 V 4 x ushion valve X M 7 7 3.5 M3 x 1.5 M3 x 1.5 M36 x 1.5 asic Double Rod Type Smooth ylinder uto Switch Made to Order 15 15 Stroke range Up to Up to Up to T 8 9 9 X 1 11 118 56 Y 6.5 8.5 194.5 53 143 7 7 M3 x 1.5 M3 x 1.5 M36 x 1.5 143 7 7 3.5 3.5 34.5 1 18 144 P 1/ 1/ 3/4 D 3 3 38 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. E 78.5 S 16 43 43 4 X 45 45 18 Y 3 5 M16 x 1.5 ithout rod boot ZZ 11 73 11 83 1 31 V e f 7 7 34 D 19 19 19 ith rod boot h l 133 1 /5 stroke 133 1 /5 stroke 141 1 /5 stroke S 85 188 1 188 16 6 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com ZZ1 96 36 3 7
Series S Dimensions Rod flange: S ith rod boot idth across flats x P (Rc, PT, ) 4 x 4 x V ushion valve øe l f T h + l ZZ1 + l + Stroke S + Stroke ZZ + Stroke M Y X Z 15 Stroke range Up to Up to Up to 56 53 143 7 7 145 18 1 18 144 D 3 3 38 E 78.5 43 43 4 D 19 19 19 T 14 X 19 1 36 Y 1 11 118 Z 3 55 18 M16 x 1.5 V 15 M P S 7 7 34 13 13 M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 16 ithout rod boot ZZ 11 1 11 1 1 41 e f ith rod boot h l 133 1 /5 stroke 133 1 /5 stroke 141 1 /5 stroke ZZ1 44 44 6 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. ead flange: S ith rod boot idth across flats x P (Rc, PT, ) 4 x 4 x V ushion valve øe Y l f h + l ZZ1 + l + Stroke ZZ + Stroke S + Stroke T X Z 15 15 Stroke range Up to 1 Up to 1 Up to 1 56 53 143 7 7 145 18 1 18 144 D 3 3 38 P S 7 7 34 M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. 8 16 E 78.5 43 43 4 ithout rod boot ZZ 11 11 8 1 46 D 19 19 19 e T 14 f X 19 1 36 Y 1 11 118 Z 3 55 ith rod boot h l 133 1 /5 stroke 133 1 /5 stroke 141 1 /5 stroke 18 ZZ1 45 51 67 M16 x 1.5 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com V
ir ylinder Series S Dimensions Single clevis: S øe øe ith rod boot h + l l Z1 + l + Stroke ZZ1 + l + Stroke Double clevis: SD ith rod boot h + l l f f Z1 + l + Stroke ZZ1 + l + Stroke idth across flats idth across flats x P (Rc, PT, ) S + Stroke Z + Stroke x P (Rc, PT, ) ZZ + Stroke S + Stroke Z + Stroke ZZ + Stroke 1 T T U hole 1 Shaft d9 U V 4 x ushion valve RR X V 4 x ushion valve RR X Z asic Double Rod Type Smooth ylinder uto Switch Made to Order 15 15 Stroke range Up to 1 Up to 1 Up to 1 56 53 143 7 7 1 18 144 145 18 D1 T P S U RR 7 7 34 65 8 M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 5 8 3 +.84 +.84 +.1 16 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. 35 45 Single clevis X.1 3.3.1 36.3.1.3 9 3 36 Double clevis X Z +.3 3 +.1 64. +.3 36 +.1 7. +.3 +.1 8. D 3 3 38 ithout rod boot Z ZZ 11 73 3 11 83 3 1 36 34 E 78.5 e 43 43 4 f 18 M16 x 1.5 ith rod boot h l 133 1 /5 stroke 133 1 /5 stroke 141 1 /5 stroke ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com V Z1 96 36 37 ZZ1 35 338 363 9
Series S Dimensions enter trunnion: ST ith rod boot Z1 + l + 1/ stroke idth across flats Z + 1/ stroke x P (Rc, PT, ) V 4 x ushion valve R øe TY øtde8 l f h + l ZZ1 + l + Stroke TT S + Stroke M TX ZZ + Stroke TZ 15 15 Stroke range 5 to 1 3 to 1 35 to 1 56 53 143 7 7 1 18 144 D 3 3 38 E 78.5 P R S TDe8 TT TX TY TZ 1/ 1/ 3/4 1 1.5 1.5 16 3 36..89..89..89 The minimum stroke with rod boot is 3 mm or more for ø15, ø and 35 mm or more for ø. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. 55 6 19 1 164 184 4 43 43 4 34 6 9 18 M16 x 1.5 V 7 7 34 M 13 13 ithout rod boot ith rod boot Z ZZ e f h l 11 9 1 133 1 /5 stroke 11 9 1 133 1 /5 stroke 1 3 41 141 1 /5 stroke M3 x 1.5 M3 x 1.5 M36 x 1.5 Z1 18 18 194 3.5 3.5 34.5 ZZ1 44 44 6 1 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder / Series S ccessory racket I Type Single nuckle oint nuckle Pin / levis Pin ø hole 1 Shaft d9 ø ø Part no. I-1 I-14 I-16 Part no. Y-1 Y-14 Y-16 pplicable bore size 15 pplicable bore size 15 1 8 8 8 1 8 8 8 Y Type Double nuckle oint α E1 1 54 46 1 M3 x 1.5 54 48 15 M3 x 1.5 6 55 11 M36 x 1.5 E1 1 46 1 M3 x 1.5 5 48 15 M3 x 1.5 8 55 11 M36 x 1.5 3 D1 +.84 +.84 +.1 D1 5 8 3 +.84 +.84 +.1 X 3 36 +.3 +.1 +.3 +.1 +.3 +.1 Material: ast iron X 3 36.1.3.1.3.1.3 Z 64 7 8.1.3.1.3.1.3 RR1 U1 7 33 3 39 34 39 Material: ast iron Use a single knuckle joint or a double knuckle joint individually. (Screw it entirely over the rod end threads and tighten it.) Extend the dimensions of,. when using a single/double knuckle joint together with a rod end nut. (To extend dimensions,, refer to the below table, and specify the product as made-to-order -X.) pin and split pin are included with the double knuckled joint. RR1 U1 7 4 3 34 46 Made to order with rod end bracket (-X86) is available when ordering cylinders and accessories together. Please refer to page 9 for details. Single/Double nuckle oint x ø l Material: arbon steel pplicable bore size Dd9 d pplicable Part no. l m (Drill through) split pin.65 IY-1 15 5.1 79.5 69.5 5 4 ø4 x.65 IY-14 8.1 86.5 76.5 5 4 ø4 x.8 IY-16 3.14 94.5 84.5 5 4 ø4 x Split pin is included. Rod End ut Part no. pplicable bore size T-1 T-16 15, M3 x 1.5 M36 x 1.5 ø Material: Rolled steel d D 18 1 46 55 53.1 63.5 44 53 asic Double Rod Type Smooth ylinder uto Switch Made to Order 1 ore size 15 11 11 1 56 1 α 3.5 3.5 3.5 1 1 15 11 1 6.5 161.5.5 pplicable knuckle joint part number I type single knuckle Y type double knuckle I-1 Y-1 I-14 Y-14 I-16 Y-16, Dimensions when Mounting a Single/Double nuckle oint together with a Rod End ut 15 65 65 76 15 15 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 11
ir ylinder, Double Rod Series S ø15, ø, ø ow to Order ith auto switch S DS ith auto switch (uilt-in magnet) Double rod type Mounting T uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DS15-1 asic oot Rod flange enter trunnion 15 15 mm mm mm 15 15 thread type il T T Rc PT ylinder stroke Refer to the next page for the Maximum Stroke table. 1 1 M9 umber of auto switches il 3 S n pcs. 3 pcs. 1 pc. n pcs. Suffix for cylinder Single side rod boot oth side rod boot ylon tarpaulin eat resistant tarpaulin ylon tarpaulin eat resistant tarpaulin Made to Order or details, refer to the next page. uto switch il ithout auto switch Refer to the table below for the applicable auto switch model. pplicable uto Switches / or detailed auto switch specifications, refer to est Pneumatics o.. Type Solid state switch Reed switch Special function Electrical entry rommet o Yes o Terminal conduit Yes DI terminal Diagnostic indication (-color indication) rommet iring (Output) -wire 4 V oad voltage 3-wire (P) 5 V, 1 V 3-wire (PP) 4 V rommet 1 V -wire 1 V, V Terminal 3-wire (P) 5 V, 1 V conduit -wire 1 V Yes 3-wire (P) Diagnostic indication 5 V, 1 V 3-wire (PP) (-color indication) -wire 4 V 1 V rommet 3-wire (P) ater resistant (-color indication) 3-wire (PP) 5 V, 1 V -wire 1 V Diagnostic indication (-color indication) 4-wire (P) 3-wire (P equivalent) Yes D 5 V, 1 V 5 V 1 V 5 V, 1 V M9 M9P M9 51 M9 M9P M9 M9 M9P M9 59 96 93 9 54 64 59 and mounting 39 39 33 34 44 ead wire length symbols:.5 m il (Example) M9 Solid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9M 3 m (Example) M9 5 m Z (Example) M9Z Since there are applicable auto switches other than listed, refer to page 3 for details. or details about auto switches with pre-wired connector, refer to est Pneumatics o.. D-9, M9, M9, M9 are shipped together (but not assembled). (Only auto switch mounting bracket is assembled at the time of shipment.) 1 Indicator light 1 V 1 V 1 V or less 1 V, V V or less 1 V, V uto switch model Tie-rod mounting ead wire length (m) Pre-wired connector pplicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com.5 (il) 1 (M) 3 () 5 (Z) Relay, P Relay, P P Relay, P
ir ylinder, Double Rod Series S Specifications IS Double acting Rod oot Material Material Max. ambient temperature ylon tarpaulin eat resistant tarpaulin 7 11 Maximum ambient temperature for the rod boot itself. Minimum Stroke for uto Switch Mounting or details on the minimum number of strokes required for mounting, please refer to the "Minimum Stroke for uto Switch Mounting" table on page. Specifications -X hange of rod end shape -X14 hange of trunnion bracket mounting positions -X hange of tie-rod length -X3 Rod side trunnion mounted on the front of the rod cover -X68 Made to Order Specifications (or details, refer to pages 5 to 9.) Made of stainless steel (ith hard chrome plated piston rod) or the specifications of cylinders with autoswitch, please refer to pages 1 to 4. Minimum stroke for auto switch mounting uto switch proper mounting position (detection at stroke end) and its mounting height Operating range uto switch mounting bracket part no. ction luid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion mbient and fluid temperature ubrication Stroke length tolerance Mounting Maximum Stroke 15 ccessory Maximum stroke 1 or less 1 or less Mounting asic oot Rod flange enter trunnion Rod end nut Single knuckle joint Option Double knuckle joint (nuckle pin, Split pin) Rod boot If using the rod end nut together with a single knuckle joint and a double knuckle joint, please refer to page 11. Mounting racket Part o. 15 oot S-1 lange S-1 Order two foot brackets per cylinder. eight / luminum tube: lube type asic weight asic oot Rod flange Trunnion dditional weight with magnet (ith built-in magnet and auto switch) dditional weight per 1 mm of stroke ccessory bracket Single knuckle Double knuckle joint (nuckle pin, Split pin) Rod end nut 15 6.36 8.39 9.41 1.49.7.18.91 1.37.16 alculation: (Example) S- asic weight 13.31 (kg) dditional weight 3.11 (kg/1 mm) ylinder stroke 13.31 + 3.11 x /1 = 8.86 (kg) 15 Double acting, Double rod ir 1.57 MPa.97 MPa.5 MPa to mm/s ir cushion ithout auto switch ith auto switch to 7 (o freezing) to 6 (o freezing) ot required (on-lube) or less st +1. :, 51 to 1, st +1.4 + : +, 1,1 to 1, st : asic, oot, Rod flange, ead flange, enter trunnion S-14 S-14 7.54 1.54 13.7 13.7.7.3 1.16 1.81.16 S-16 S-16 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 9.93 13.31 16.66 16.33.8 3.11 1.56.48.3 +1.8 + (kg) 13 asic Double Rod Type Smooth ylinder uto Switch Made to Order
Series S onstruction!7!1!!4 yqui!5!8 rwoe!6!3!9! t omponent Parts o. 1 3 4 5 6 7 8 9 1 11 1 13 Description Rod cover ylinder tube Piston Piston rod Piston rod ushing Tie-rod Tie-rod nut ushion ring ushion valve Retaining ring Pin Magnet Material luminum die-cast luminum alloy luminum alloy arbon steel arbon steel Oil-impregnated sintered alloy arbon steel Rolled steel Stainless steel Rolled steel Spring steel Spring steel uilt-in magnet type with auto switch ote hromated ard anodized hromated ard chrome plated ard chrome plated Zinc chromated ickel plated ickel plated Phospate coated Phospate coated omponent Parts o. Description 14 Rod seal ushion seal 16 Piston seal Valve seal 18 Tube gasket 19 Piston gasket Material R Urethane R R R R ote Replacement Parts: Seal it it no. ontent 15 S15-PS Set of nos. S-PS above!4,!5,!6,!8. S-PS Seal kit includes a grease pack ( g). Order with the following part number when only the grease pack is needed. rease pack part number: R-S-1 (1 g), R-S- ( g) 14 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder, Double Rod Series S Dimensions asic: S ith rod boot (One side) øe øe l f h + l ZZ + l + x strokes ø15 ø ø ø15 ø ø Stroke range Up to 1 Up to 1 Up to 1 oot: S ith rod boot ushion valve ushion valve l f h + l ZZ + l + x strokes (with rod boot on one side) ZZ + x l + x strokes (with rod boot on both sides) V ushion valve ith rod boot (oth sides) D V V X 4 x E 4 x 4 x Y idth across flats idth across flats øe 56 53 143 7 7 1 18 144 3 3 38 78.5 43 43 4 18 M16 x 1.5 ithout rod boot ith rod boot (single side) (oth sides) ZZ e f h l ZZ ZZ 11 318 133 1 /5 stroke 341 364 11 318 133 1 /5 stroke 341 364 1 346 141 1 /5 stroke 367 388 Stroke range D idth across flats E l h + l V T f Y X x P (Rc, PT, ) S + Stroke ZZ + x strokes x P (Rc, PT, ) S + Stroke ZZ + x l + x strokes 7 7 34 M S + Stroke x P (Rc, PT, ) S + Stroke ZZ + x strokes ø15 Up to 1 143 143 1 3 43 7 19 ø Up to 1 7 7 18 3 43 7 19 ø Up to 1 56 53 7 7 144 38 78.5 4 18 M16 x 1.5 34 19 ithout rod boot ith rod boot (Single side) (oth sides) P S X Y ZZ e f h l ZZ ZZ ø15 ø ø M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 16 45 45 3 5 11 11 1 318 318 346 133 133 141 1 /5 stroke 1 /5 stroke 1 /5 stroke 341 341 367 364 364 388 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. V M M idth across flats + Stroke idth across flats l + Stroke f h + l + Stroke X 7 M3 x 1.5 3.5 7 M3 x 1.5 3.5 3.5 M36 x 1.5 34.5 D 85 1 16 S 188 188 6 + Stroke 4 x Y P 1/ 1/ 3/4 S 16 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. T 8 9 9 X 1 11 118 idth across flats ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com øe Y 6.5 8.5 194.5 asic Double Rod Type Smooth ylinder uto Switch Made to Order
Series S Dimensions Rod flange: S ith rod boot V ushion valve 4 x idth across flats 4 x x P (Rc, PT, ) idth across flats øe l f h + l ZZ + l + x strokes (with rod boot on one side) ZZ + x l + x strokes (with rod boot on both sides) T S + Stroke ZZ + x strokes M Z + l + 1/ stroke ushion valve V idth across flats 4 x R Z + 1/ stroke x P (Rc, PT, ) idth across flats M øe TY Y Stroke range X Z ø15 Up to 1 143 145 1 3 43 19 14 19 1 3 ø Up to 1 7 18 3 43 19 1 11 55 ø Up to 1 56 53 7 18 144 38 78.5 4 19 36 118 18 ithout rod boot ith rod boot (Single side) (oth sides) P S ZZ e f h l ZZ ZZ ø15 ø ø M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 16 11 11 1 318 318 346 133 133 141 1 /5 stroke 1 /5 stroke 1 /5 stroke 341 341 367 364 364 388 The minimum stroke with rod boot is 3 mm or more. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. D E D T X Y Z M16 x 1.5 V + Stroke M 7 13 7 13 34 enter trunnion: ST ith rod boot l f h + l ZZ + l + x strokes (with rod boot on one side) ZZ + x l + x strokes (with rod boot on both sides) ø15 ø ø ø15 ø ø Stroke range 5 to 1 3 to 1 35 to 1 TDe8 3 36..89..89..89 56 TT 55 6 53 TX 19 1 143 7 7 TY 164 184 4 TX TZ D E øtde8 V TT S + Stroke ZZ + x strokes 1 18 144 3 3 38 78.5 43 43 4 18 M16 x 1.5 7 7 34 13 13 M3 x 1.5 M3 x 1.5 M36 x 1.5 3.5 3.5 34.5 1/ 1/ 3/4 TZ ithout rod boot ith rod boot (Single side) (oth sides) Z ZZ e f h l Z ZZ ZZ 34 11 9 318 133 1 /5 stroke 18 341 364 6 11 9 318 133 1 /5 stroke 18 341 364 9 1 3 346 141 1 /5 stroke 194 367 388 The minimum stroke with rod boot is 3 mm or more for ø15, ø, and 35 mm or more for ø. or auto switch mounting position and its mounting height, refer to page 1. Refer to Minimum Stroke for uto Switch Mounting on page. 16 M + Stroke ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com P R 1 1.5 1.5 S 16
ith auto switch ith auto switch (uilt-in magnet) D T Smooth ylinder Series SY ø15, ø, ø S Y DS Y Smooth ylinder Mounting asic oot Rod flange ead flange Single clevis Double clevis enter trunnion uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSY15- Yes Yes o Yes o Yes 15 15 mm mm mm thread type il T T Rc PT ylinder stroke Refer to the next page for the Maximum Stroke table. iring oad voltage (Output) D 4 V 4 V 4 V 1 V, V 1 V 1 V or less 1 V, V V or less 1 V, V 3 3 M9 umber of auto switches il S 3 n pcs. 1 pc. 3 pcs. n pcs. Suffix for cylinder Rod boot ith/without cushihon pplicable uto Switches / or detailed auto switch specifications, refer to est Pneumatics o.. Type Solid state switch Reed switch Special function Diagnostic indication (-color indication) ater resistant (-color indication) Diagnostic indication (-color indication) Diagnostic indication (-color indication) Electrical entry rommet Terminal conduit rommet rommet Terminal conduit DI terminal rommet ead wire length symbols:.5 m il (Example) M9 1 m M (Example) M9M 3 m (Example) M9 5 m Z (Example) M9Z Indicator light 3-wire (P) 3-wire (PP) -wire 3-wire (P) -wire 3-wire (P) 3-wire (PP) -wire 3-wire (P) 3-wire (PP) -wire 4-wire (P) 3-wire (P equivalent) -wire ow to Order 5 V, 1 V 1 V 5 V, 1 V 1 V 5 V, 1 V 1 V 5 V, 1 V 1 V 5 V, 1 V 5 V 1 V 5 V, 1 V 1 V R il ylon tarpaulin eat resistant tarpaulin ith double-side cushion ith rod cushion ith head cushion ithout cushion hen more than one symbol is specified, indicate them in alphabetical order. uto switch model Tie-rod mounting M9 M9P M9 51 M9 M9P M9 M9 M9P M9 59 96 93 9 54 64 59 uto switch il ithout auto switch Refer to the table below for the applicable auto switch model. and mounting 39 39 33 34 44 ead wire length (m) Solid state auto switches marked with are produced upon receipt of order. Since there are applicable auto switches other than listed, refer to page 3 for details. or details about auto switches with pre-wired connector, refer to est Pneumatics o.. D-9, M9, M9, M9 are shipped together (but not assembled). (Only auto switch mounting bracket is assembled at the time of shipment.) Made to Order or details, refer to the next page. Pre-wired connector pplicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com.5 (il) 1 (M) 3 () 5 (Z) Relay, P Relay, P P Relay, P asic Double Rod Type Smooth ylinder uto Switch Made to Order
Series SY Designed with a low sliding resistance of the piston, this air cylinder is ideal for applications such as contact pressure control, which requires smooth movements at low pressure. ow sliding resistance Min. operating pressure.5 MPa uto switch mounting is possible pplication Example ow friction cylinder is used in combination with precision regulator (Series IR). Driving roller inding roller Precision regulator Precision regulator (Moving object) Specifications 15 IS Double acting ction Direction of low friction luid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature llowable leakage ushion ubrication Mounting Double acting, Single rod oth directions ir 1.5 MPa.7 MPa.5 MPa ithout auto switch to 7 (o freezing) ith auto switch to 6 (o freezing) ess than.5 l/min (R) ithout cushion (manufacturable with cushion) ot required (on-lube) asic, oot, Rod flange, ead flange, Single clevis, Double clevis, enter trunnion If a cushion is used, this value will not include the operating pressure within the cushion stroke. If an air cushion is not used, set the energy at the stroke end to.36 or less. Made to Order specifications (or details, refer to pages 5 to 9.) Specifications -X hange of rod end shape -X3 Special port position -X14 hange of trunnion bracket mounting position -X hange of tie-rod length Double clevis pin/double knuckle pin with -X6 split pin and flat washer Double clevis pin and double knuckle pin -X7 made of stainless steel Rod side trunnion mounted on the front -X3 of the rod cover Made of stainless steel -X68 (ith hard chrome plated piston rod) -X86 ith rod end bracket Maximum Stroke Tube material Mounting bracket 15 ccessory luminum alloy asic, ead flange, Single clevis, Double clevis, enter trunnion Rod flange 1 or less 1 or less 1 or less arbon steel tube asic, ead flange, Single clevis, Double clevis, enter trunnion 1 or less 1 or less 1 or less oot, Rod flange or less or less or less or the specifications of cylinders with autoswitch, please refer to pages 1 to 4. Minimum stroke for auto switch mounting uto switch proper mounting position (detection at stroke end) and its mounting height Operating range uto switch mounting bracket part no. Standard equipment Option Mounting levis pin Rod end nut Single knuckle joint Double knuckle joint (nuckle pin, Split pin) Rod boot asic oot Rod flange ead flange Single clevis Double clevis enter trunnion 18 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
Smooth ylinder Series SY Mounting racket Part o. Rod oot Material 15 oot lange Single clevis Double clevis S 1 S 1 S 1 S D1 S 14 S 14 S 14 S D14 S 16 S 16 S 16 S D16 Order two foot brackets per cylinder. hen ordering the double clevis style, the clevis pin and split pins are included as accessories. eight asic weight Sliding Resistance Sliding Resistance (MPa) (onverted into cylinder operating pressure) asic oot Rod flange ead flange Single clevis Double clevis Trunnion dditional weight with magnet (ith built-in magnet and auto switch) dditional weight per each 1 mm of stroke Single knuckle ccessory bracket Double knuckle (ith nuckle pin, Split pin).1.5 15 5.46 7.49 8.51 8.51 8.53 8.99 9.59 6. 9. 1.3 1.3 1.79 11.54 1.3 9.7 1.45.8.8 14.56.41..7 1.55.91 1.37 Rod end nut.16 alculation: (Example) SY- asic weight 1.45 (kg) dditional weight.3 (kg/1 mm) ylinder stroke 1.45 +.3 x /1 = 3.6 (kg).7 1.67 1.16 1.81.16.8.3 1.56.48.3 (kg) Material ylon tarpaulin eat resistant tarpaulin Max. ambient temperature 7 11 Maximum ambient temperature for the rod boot itself. ø15 ø ø asic Double Rod Type Smooth ylinder uto Switch Made to Order.1..3.4.5.6.7 Pressure (MPa) ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 19
Series SY onstruction!9!5!!6 yqui!7 @ te or!8!4!3 @1! w!1 omponent Parts o. Description Material ote 1 3 4 5 6 7 8 9 1 11 1 13 14 16 18 19 1 Rod cover ead cover ylinder tube Piston Piston rod ushing Tie-rod Tie-rod nut ushion ring ushion valve Piston nut lat washer ear ring Magnet Retaining ring Rod seal ushion seal Piston seal Valve seal Tube gasket Piston gasket luminum die-cast luminum die-cast luminum alloy luminum alloy arbon steel Oil-impregnated sintered alloy arbon steel Rolled steel Stainless steel Rolled steel arbon steel arbon steel Resin Spring steel R Urethane R R R R hromated hromated ard anodized hromated ard chrome plated Zinc chromated ickel plated ickel plated ickel plated ickel plated Phosphate coded. or types with built-in magnet or with auto switch. Used with cushion only. Replacement Parts: Seal kit. it no. 15 SY15-PS SY-PS SY-PS 15 SY15-PS SY-PS SY-PS 15 SY15R-PS SYR-PS SYR-PS Dimensions ontent ithout cushion onsists of omponent Part umbers!6,!8, and @ ith single-side cushion onsists of omponent Part umbers!6,!7 (two),!8, and @ ith single-side cushion onsists of omponent Part umbers!6,!7 (one),!8 and @. Seal kit does not include a grease pack. Order with the following part number when only the grease pack is needed. rease pack part number: R--5 (5 g), R-S-1 (1 g), R-- (g) External dimensions are the same as the S standard type. Refer to pages 7 to 1. ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder Series S uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight <and mounting> D-3 type D-3/3 type D-44 type 49 36 uto switch 34.5 36 D-9 D-9 V 9 9 9 8 8 8 1/ D-M9 D-M9 V D-M9 D-M9 V D-M9 D-M9 V 13 13 13 1 1 1 34 56 uto Switch Proper Mounting Position uto switch model 15 1/ The indicator light faces the inside. pplicable cable O.D. ø6.8 to ø9.6 uto switch pplicable cable O.D. ø6.8 to ø9.6 D-Z7 /Z8 D-Y5 /Y6 D-Y7P/Y7PV D-Y7 D-Y7 V D-Y7 6.5 6.5 6.5 5.5 5.5 5.5 s D-5 D-6 D-3 D-44 D-39 D-39 3 3 3 D-59 7 7 7 D-5 /6 type 6 6 6 33 D-5 /5 /D-5T type D-5/59 type D-5 /59 type 3 D-5 D-59 D-5 D-5 D-5 D-59 9.5 8.5 9.5 8.5 9.5 8.5 D-5T Provided as guidelines for auto switch proper mounting position (detection at stroke end). hen setting an auto switch, confirm the operation and adjust its mounting position. s <Tie-rod mounting> D-9 /9 V type D-M9 /M9 V type D-M9 /M9 V type D-M9 /M9 V type 14.5 14.5 14.5 D-Z7 /Z8 type D-Y59 /Y69 /Y7P/Y7PV type D-Y7 /Y7 V type D-Y7 type 13.5 13.5 13.5 uto switch uto switch uto switch t t t t t s s s asic Double Rod Type Smooth ylinder uto Switch Made to Order uto Switch Mounting eight uto switch model 15 D-9 D-9 V D-M9 D-M9 D-M9 s 69 76 85 t 69.5 76 85 D-M9 V D-M9 V D-M9 V s.5 77.5 86 t 69.5 76 85 D-Z7 /Z8 D-Y5 /Y6 D-Y7P D-Y7PV D-Y7 D-Y7 V D-Y7 s 69 76 85 t 69.5 76 85 D-3 D-39 D-39 s 116 14 134.5 D-44 s 16 134 144.5 D-5 D-6 D-59 s.5 81 89 t 69.5 76.5 87.5 D-5 D-5 D-5 D-59 D-5 D-59 D-5T s t 74.5 7 8 76.5 88 87.5 ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 1
Series S Minimum Stroke for uto Switch Mounting uto switch model D-9 D-9 V D-M9 D-M9 D-M9 V D-M9 V D-M9 D-M9 V D-5 /6 D-59 D-5 /5 D-5 D-59 D-5 D-59 D-5T D-3 D-39 D-39 D-44 D-Z7 D-Z8 D-Y59 D-Y7P D-Y7 D-Y69 D-Y7PV D-Y7 V D-Y7 umber of auto switches mounted ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. (Same surface) ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. (Same surface) ith pcs. ith n pcs. ith pcs. ith n pcs. ith n pcs. Different surfaces Same surface Different surfaces Same surface ith 1 pc. Different surfaces Same surface Different surfaces Same surface ith 1 pc. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. ith pcs. (Different surfaces, Same surface), ith 1 pc. ith n pcs. Mounting brackets other than center trunnion (n ) + (n =, 4, 6, 8 ) 1 (n ) 1 + 3 (n =, 4, 6, 8 ) (n ) + (n =, 4, 6, 8 ) 1 (n ) 1 + 3 (n =, 4, 6, 8 ) 5 (n ) 5 + 55 (n =, 4, 6, 8 ) 35 (n ) 35 + 55 (n =, 4, 6, 8 ) 35 1 35 + 3(n ) 1 + 1(n ) 35 55 35 + 3(n ) 55 + 55(n ) (n ) + (n =, 4, 6, 8 ) 1 (n ) 1 + 3 (n =, 4, 6, 8 ) (n ) + 45 (n =, 4, 6, 8 ) n: umber of auto switches enter trunnion ø15 ø ø 1 1 + (n = 4, 8, 1, 16 ) + 3 (n = 4, 8, 1, 16 ) 15 15 + (n = 4, 8, 1, 16 ) 8 8 + 3 (n = 4, 8, 1, 16 ) 1 (n ) + (n =, 4, 6, 8 ) 1 + (n = 4, 8, 1, 16 ) 9 (n ) + 3 (n =, 4, 6, 8 ) 9 + 3 (n = 4, 8, 1, 16 ) 15 15 + 55 (n = 4, 8, 1, 16 ) 145 145 + 55 (n = 4, 8, 1, 16 ) 15 15 + (n = 4, 8, 1, 16 ) 9 9 + 3 (n = 4, 8, 1, 16 ) 1 1 + 45 (n = 4, 8, 1, 16 ) 15 15 + (n = 4, 8, 1, 16 ) 8 8 + 3 (n = 4, 8, 1, 16 ) 11 11 + (n = 4, 8, 1, 16 ) 85 85 + 3 (n = 4, 8, 1, 16 ) 11 11 + 3(n ) (n =, 4, 6, 8 ) 11 + 1(n ) (n =, 4, 6, 8 ) 11 11 11 + 3(n ) (n =, 4, 6, 8 ) 11 + (n ) (n =, 4, 6, 8 ) 11 11 11 + (n = 4, 8, 1, 16 ) 95 95 + 3 (n = 4, 8, 1, 16 ) 1 1 + 45 (n = 4, 8, 1, 16 ) 1 1 + (n = 4, 8, 1, 16 ) 95 95 + 3 (n = 4, 8, 1, 16 ) 135 135 + 55 (n = 4, 8, 1, 16 ) 5 5 + 55 (n = 4, 8, 1, 16 ) 11 11 + (n = 4, 8, 1, 16 ) 85 85 + 3 (n = 4, 8, 1, 16 ) 1 1 + (n = 4, 8, 1, 16 ) 9 9 + 3 (n = 4, 8, 1, 16 ) 1 1 + (n = 4, 8, 1, 16 ) 1 1 + 3 (n = 4, 8, 1, 16 ) 15 15 + 45 (n = 4, 8, 1, 16 ) ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder Series S Operating Range uto Switch Mounting racket Part o. uto switch model D-9 /9 V D-M9 /M9 V D-M9 /M9 V D-M9 /M9 V D-Z7 /Z8 D-3 /44 D-5 /6 D-59 D-Y59 /Y69 D-Y7P/Y7PV D-Y7 /Y7 V D-Y7 D-5 /5 /5 D-59/5 D-5T/59 D-39/39 15 1 1.5 11.5 6 14 1 1 5 11 6.5 14.5 1 13 5 11 13 1 6.5 7 1 5.5 Since this is a guideline including hysteresis, not meant to be guaranteed. (ssuming approximately ±3% dispersion.) There may be the case it will vary substantially depending on an ambient environment. uto switch model D-9 /9 V D-M9 /M9 V D-M9 /M9 V D-M9 /M9 V D-5 /6 D-59 D-5 /5 D-5T D-5 /59 D-5/59 D-3 /44 D-39/39 D-Z7 /Z8 D-Y59 /Y69 D-Y7P/Y7PV D-Y7 /Y7 V D-Y7 ø15 S5-15 T-1 S4-15 ø S5-15 T-1 S4-15 ø S5- T-16 S1-15 S1- S1- ith pre-wired connector is available for solid state auto switches. or details, refer to est Pneumatics o.. ormally closed ( = b contact), solid state switches (D-9, 9, Y7, Y7 type) are also available. or details, refer to est Pneumatics o.. S4- Other than the applicable auto switches listed in ow to Order, the following auto switches can be mounted. or detailed specifications, refer to est Pneumatics o.. Type Reed auto switch Solid state auto switch Model D-9V D-93V, 96V D-Z73, Z76 D-53, 56 D-67 D-Z8 D-59, 5P, 59 D-Y59, Y59, Y7P D-59, 5P, 59 D-Y7, Y7P, Y7 D-5, Y7 D-5T D-M9V, M9PV, M9V D-Y69, Y69, Y7PV D-M9V, M9PV, M9V D-Y7V, Y7PV, Y7V D-M9V, M9PV, M9V [Mounting screws set made of stainless steel] The following set of mounting screws made of stainless steel (including set screws) is also available. Use it in accordance with the operating environment. (Please order the auto switch mounting bracket separately, since it is not included.) 1: or D-5, 6, 5, 5 type D-5 auto switch is set on the cylinder with the stainless steel screws above when shipped. hen only an auto switch is shipped independently, 1 screws are attached. ote) hen using the D-M9 /M9 V or Y7 model, do not use the steel set screw which is included with the auto switch mounting bracket in the above table (S5-, S4- ). Please separately prepare the stainless steel screw set (1), and select and use the M4 x 8 stainless steel set screw included in 1. Electrical entry (Direction) rommet (Perpendicular) rommet (in-line) rommet (in-line) rommet (Perpendicular) ote 1) Refer to est Pneumatics o. for the details of 1 screws. Shows an example of mounting the D-9 (V), M9 (V), M9 (V), M9 (V) model. eatures ithout indicator light ithout indicator light -color indication ater resistant (-color indication) ith timer -color indication ater resistant (-color indication) asic Double Rod Type Smooth ylinder uto Switch Made to Order ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 3
asic iring uto Switch onnections and Examples Solid state 3-wire, P Switch main circuit rown oad lack lue Solid state 3-wire, PP Switch main circuit rown lack lue oad -wire (Solid state) Switch main circuit rown oad lue -wire (Reed) Indicator light protective circuit etc. rown oad lue (Power supplies for switch and load are separate.) Switch main circuit rown oad lack lue Switch main circuit rown oad lue Indicator light protective circuit etc. rown oad lue Example of onnection to P (Programmable ogic ontroller) Sink input specification 3-wire, P lack Input Source input specification 3-wire, PP lack Input onnect according to the applicable P input specifications, since the connection method will vary depending on the P input specifications. Switch rown Switch rown lue lue -wire rown OM Input P internal circuit -wire lue OM Input P internal circuit Switch Switch lue OM P internal circuit rown OM P internal circuit Example of D (Serial) and OR (Parallel) onnection 3-wire D connection for P output (using relays) Switch 1 Switch rown lack lue Relay rown lack Relay lue oad Relay contact D connection for P output (performed with switches only) rown lack Switch 1 oad lue Switch rown lack lue OR connection for P output Switch 1 Switch rown lack lue rown lack lue oad The indicator lights will illuminate when both switches are turned O. -wire with -switch D connection Switch 1 Switch rown lue rown lue oad hen two switches are connected in series, a load may malfunction because the load voltage will decrease when in the O state. The indicator lights will illuminate if both of the switches are in the O state. Power supply Residual oad voltage at O = x pcs. voltage voltage = 4 V 4 V x pcs. = 16 V Example: Power supply is 4 VD. Internal voltage drop in switch is 4 V. 4 -wire with -switch OR connection (Solid state) rown hen two switches oad are connected in parallel, a malfunction Switch 1 lue may occur because the load voltage will rown Switch increase when in the O state. lue oad voltage at O = eakage current x pcs. x oad impedance = 1 m x pcs. x 3 kω = 6 V Example: oad impedance is 3 kω. eakage current from switch is 1 m. (Reed) ecause there is no current leakage, the load voltage will not increase when turned O. owever, depending on the number of switches in the O state, the indicator lights may sometimes dim or not light because of the dispersion and reduction of the current flowing to the switches. ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com
ir ylinder / Series S Simple Specials Please order through the Simple Specials system. 1 Series S hange of Rod End Shape pplicable Series Description Standard Model S type S Smooth cylinder SY : : 1 : : 3 : 5 : 6 : 7 : 1 R ball ørd ction Double acting single rod Double acting double rod Double acting single rod : 11 for applicable patterns X to 3 X to 3 X to 3.5 T 1 TP 3 : : 16 : : 18 : 19 3 : : 1 : : 3 : 5 : 6 : 7 3 R ball 3 3 3 T 3 : 8 : 8 Precautions : 4 : 9 : 1 : 13 : 14.5 R ball T -X to X3 1) Dimensions, tolerance and finish that are not displayed here are the same as standard types, or set at the discretion of SM. ) The standard dimensions with will be as follows to the following rod diameter (D). Please specify if changing the dimensions. D < = 6 D 1 mm 6<D < = 5 D mm D>5 D 4 mm 3) In the case of double rod type and single acting retraction type, enter the dimensions for when the rod is retracted. 4) Only the single side of a double rod is able to manufacture. 3 1 3 3 3 3 T 3 3 3 3 ørd 3 3 ørd.5 file chamfer T : 4 : 9 3 1 3 3 3 asic Double Rod Type Smooth ylinder uto Switch Made to Order : 3 T 3 T ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 5
ir ylinder / Series S Made to Order Specifications 1 ontact SM for detailed dimensions, specifications, and lead times. Special Positions -X3 The positions of ports and cushion valves on the rod cover and head cover are changed from those of the standard type. pplicable Series Series S ow to Order Description Standard type Smooth cylinder Model S SY ction Double acting single rod Double acting single rod Standard model no. X3 Special Positions ushion valve position viewed from rod side position viewed from rod side Please indicate,,, or D, after checking the port position in the diagram below. Specifications: Same as standard type Relation between Positions and ushion Valve Positions (Rod chamfer) Series s according to mounting bracket (relation of positions) ushion Valve ushion Valve ushion Valve ushion Valve ushion Valve ushion Valve ushion Valve D D D D D D D S asic oot Rod flange ead flange Single clevis Double clevis enter trunnion (1) The symbol indicating the port or cushion valve position is assigned to the top position viewed from the rod side, with,, and D to the other positions in order when rotating clockwise. () The optional combination of the port and cushion valve is available only when the same positional change is applied to the rod cover and head cover. (3) The symbol -X3 indicates the standard specification so an optional specification with this part number does not exist. 3 hange of Trunnion racket Mounting Position -X14 The position for mounting the trunnion bracket on the cylinder can be moved from the standard mounting position to any desired position. pplicable Series Series S Precautions 1) Specify "Z + 1/ stroke" in case the trunnion bracket position is not -X14, -X14 or trunnion is not a center trunnion. ) SM will make appropriate arrangements if no dimensions, tolerance, or finish instructions are given in the diagram. 3) The possible range of trunnion bracket mounting positions is indicated in the table below. 4) Some trunnion mounting positions do not allow auto switch mounting. onsult SM for more information. 5) Series S has a greater range of trunnion bracket mounting positions than Series S1, so the value of "Z + 1/ stroke" at -X14 and -X14 is different. Series S ore Size 15 6 Description Standard type Smooth cylinder or -X14 165.5 168 186 Model S S SY ction Double acting single rod Double acting double rod Double acting single rod or -X14.5 + Stroke + Stroke + Stroke Minimum 166 168.5 186.5 (Z + 1/ stroke) = Z + 1/ stroke or -X14 Maximum + Stroke 149.5 + Stroke 9.5 + Stroke Trunnion position of -X14 Reference for standard (center trunnion) 9 + 1/ stroke 9 + 1/ stroke 3 + 1/ stroke Trunnion position of -X14 Minimum Stroke ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 5 3 35
Made to Order Specifications Series S 4 hange of Tie Rod ength -X Standard M dimension, the tie rod length of the air cylinder, is changed. pplicable Series Series S Description Standard type Smooth cylinder Model S S SY Precautions Double acting single rod Double acting double rod Double acting single rod 1) hen ordering, specify the required M dimension with the part number. ) SM will make appropriate arrangements if no dimensions, tolerance, or finish instructions are given in the diagram. 3) The possible range of tie-rod length is listed in the table below. 4) The M dimension of the bracket mounting side of lange (, ), levis (, D) types cannot be specified. hangeable Range of Tie Rod ength Model S 15 Mounting bracket,,,, D, T,,,, D, T M minimum M maximum 1 1 1 7 3,,,, D, T 14 M = M = lat washer was added to the double clevis type (a mounting type) or the double knuckle joint (an accessory). Series S Description Standard type Smooth cylinder Model S SY ction Double acting single rod Double acting single rod 5 Double levis Pin/Double nuckle Pin with Split Pin and lat asher -X6 pplicable Series ow to Order Product SD Y Double levis Parts ss'y S Double levis Standard model no. ith clevis pin, split pin, flat washer D1 1, 14, 16 Double clevis knuckle joint X6 1 15 mm 14 mm 16 mm ction ith knuckle joint pin, split pin, flat washer X6 ith clevis pin, split pin, flat washer X6 Specification Mounting bracket hanged parts Double clevis type (D), double knuckle joint only levis pin, knuckle pin, flat washer Other specifications Same as standard type (Dimensions not listed below are the same as those of the standard type.) Dimensions Double clevis Split pin lat washer Double nuckle oint Split pin Pin The mounting bracket itself will be shipped together with the split pin, clevis pin and flat washer (but not assembled). Mounting is the same as standard types. The mounting bracket itself will be shipped together with the split pin, knuckle pin and flat washer (but not assembled). Mounting is the same as standard types. lat washer ø15 ø ø 9 14 113 asic Double Rod Type Smooth ylinder uto Switch Made to Order IY 1, 14, 16 levis pin/nuckle pin ith clevis pin, knuckle pin, split pin, flat washer X6 ø15 ø ø ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com 9 14 113 7
6 Double levis Pin and Double nuckle Pin Made of Stainless Steel -X7 To prevent the rotating part of a double clevis, which is a bracket, or double knuckle joint, which is an accessory, from rusting the materials of the pin and the retaining ring (split pin) have been changed to stainless steel. pplicable Series Series S ir ylinder / Series S Made to Order Specifications Description Standard type Smooth cylinder ontact SM for detailed dimensions, specifications, and lead times. Model S SY ction Double acting single rod Double acting single rod Specification Mounting bracket Double clevis type (D), double knuckle joint only hanged parts levis pin, knuckle pin, split pin Other specifications Same as standard type ow to Order SD Y Double clevis type Double knuckle joint Standard model no. 1, 14, 16 Double clevis pin made of stainless steel Double knuckle joint pin made of stainless steel X7 X7 IY 1, 14, 16 X7 levis pin made of stainless steel nuckle pin levis pin and knuckle pin Dimensions: Same as standard type The mounting bracket itself will be shipped together with the split pin, clevis pin, and knuckle joint pin. Mounting as the same as standard size. Split pin nuckle oint Pin 7 Rod Side Trunnion Mounted on the ront of the Rod over. -X3 cylinder with a reduced distance between the fulcrum and the rod end, which has been realized by mounting the trunnion bracket on the front of the cylinder's rod cover. pplicable Series Series S Description Standard type Smooth cylinder Model S S SY ction Double acting single rod Double acting double rod Double acting single rod Specifications: Same as standard type Dimensions (Dimensions other than below are the same as standard type) ow to Order øtde8 ST Standard model no. X3 TY ø15 ø ø Trunnion bracket 38.5 46 3 3 6 45 45 8.5 8.5 3.5 Trunnion mounted on the front of the rod cover S 96 96 14 Z TDe8 3 36..89..89..89 TT S + Stroke ZZ+ Stroke TT 55 6 TY 164 184 4 TZ 34 6 9 11 11 1 TZ Z 87 84.5 9 ZZ 1 1 41 8 Made of Stainless Steel (ith hard chrome plated piston rod) -X68 pplicable for uses where rust and corrosion are expected, such as by immersing in water. pplicable Series Series S Description Standard type Smooth cylinder Model S S SY ow to Order Standard model no. Made of stainless steel (with hard chrome plated piston rod) 8 ction Double acting single rod Double acting double rod Double acting single rod X68 Specifications Parts changed to stainless steel Other specifications and dimensions Maximum Stroke Series Double functioning single rod S Piston rod Same as standard type Double functioning single rod with rod boot ourtesy of Steven Engineering, Inc.-3 Ryan ay, South San rancisco, -637-Main Office: (6) 588-9-Outside ocal rea: (8) 58-9-www.stevenengineering.com