Sliding clamp, compact singl acting with spring rturn adaptr Clamping block Prss bd Hydraulic clamping block Optimun adaptation in narrow construction spacs Applications: th compact sliding clamp is a hydraulic clamping lmnt, usd with minimum spac rquirmnts for clamping and looking on machins and plants, on prss bd and ram. du to th managabl and roundd dsign, compact sliding clamps ar spcially suitabl whr spac is limitd as, for xampl, on high-spd punching prsss. Th us is possibl at ambint tmpraturs up to a maximum of 120 C. Function Manual positioning of th sliding clamp in th s of th prss ram or bd. Clamping on th di clamping dg by th application of hydraulic prssur to th piston and unclamping by spring forc. Th compact sliding clamp consists of a hydraulic clamping block which will b fixd with two scrws to a adaptr. Th clamping block can also b dirctly scrwd without adaptr and can b ordrd sparatly. Advantags high clamping forc in combination with small siz and low wight rgonomic adaptr for asy insrtion high-quality surfac protction on th clamping block clamping block roundd and thus optimum adaption in narrow construction spacs saf handling by spcial rcssd grip 14, 18, 22 and 28 mm ar availabl total strok 8 and 12 mm di standardization with rgard to th width and dpth in not rquird asy to rtrofit High-quality surfac protction Rcssd grip for saf handling Surfac black-oxidd Ergonimcally roundd insrtion dgs Fixing scrw adaptr From 22 mm with thr ports 3.2202 87 1
i f t Sliding clamp, compact singl acting with spring rturn Hydraulic sliding clamp complt, with adaptr s * a1 n (scrw) a d Max. strok b G 1/4 (from 22 mm with thr ports) c Clamping block adaptr Minimum insrtion dpth 1/2 strok Fixing scrw d1 1 g k h Clamping dg Wb hight p x * From 22 mm with hydraulic port at th rar and at th sid o m Exampl of ordring HCR-8.2202.1855.F60 Functional dimnsion f : = 1/2 strok + di clamping hight + wb hight of th Plas spcify whn ordring. Sliding clamp Clamping forc: 19.6 kn 18 mm Functional dimnsion f [mm] Plas spcify whn ordring as pr DIN 650 [mm] 14 18 22 22 28 28 Clamping forc at 400 bar [kn] 19.6 19.6 32 50 50 78 Strok [mm] 8 8 8 8 8 12 Oil volum [cm 3 ] 4 4 7 10 10 24 Dimnsion f min. [mm] 30 41 50 50 55 60 Dimnsion f max. [mm] 75 90 106 106 112 117 a [mm] 83 83 104 111 111 2 a1 [mm] 65 65 81 85 85 99 b [mm] 45 45 65 65 65 80 c [mm] 40 40 47 50 50 75 d [mm] 25 25 32 40 40 50 d1 [mm] 15 15 15 20 20 25 (min. insrtion dpth) [mm] 22 22 28 31 31 38 1 [mm] 28 33 41 48 48 60 g [mm] 20 24 32 32 42 42 h [mm] 19 25 30 30 37 37 i [mm] 8 10 14 14 18 18 k [mm] 14 18 22 22 28 28 m [mm] 21 28 35 35 44 44 n (scrw DIN 912, 10.9) M 10 M 10 M 16 M 16 M 16 M 20 o [mm] 18 18 20 20 20 28 p [mm] 26 26 36 36 36 43 r [mm] 40 40 50 50 50 57 s [mm] 11 11 12 12 12 17.5 t [mm] 29 29 29 32 32 53 x [mm] 78 83 104 104 104 2 Clamping block with adaptr Wight [kg] 1.5 2.9 3.6 3.9 4.5 7.5 HCR-8.2202.1455 HCR-8.2202.1855 HCR-8.2203.2255 HCR-8.2204.2255 HCR-8.2204.2855 HCR-8.2205.2855 Clamping block, sparat Wight [kg] 0.7 0.7 2.0 2.3 2.3 4.9 HCR-8.2202.05 HCR-8.2202.05 HCR-8.2203.05 HCR-8.2204.05 HCR-8.2204.05 HCR-8.2205.05 Plas consult us if aggrssiv spray is usd. Max. oprating prssur 400 bar, max. oprating tmpratur 120 C. Furthr sizs and spcial vrsions ar availabl on rqust. 3.2202 2 88
Sliding clamp, compact singl acting with spring rturn Valus in brackts for 14mm s 120 (82) 100 (65) 60 (20) 30 5 (40) k Ø 11 (Ø 9) i g 1/2 strok a x Brackt Spacr bar Distanc dimnsion x = f + i - g - 1/2 strok Plas spcify whn ordring Parking station accommodats th sliding clamp during di chang as pr DIN 650 [mm] 14 18 22 28 a [mm] 21 25 33 43 k [mm] 23 30 37 46 l [mm] 8 10 14 18 g [mm] 20 24 32 42 Parking station complt (with brackt and spacr bar) HCR.8.2754.1450 HCR.8.2754.1850 HCR.8.2754.2250 HCR.8.2754.2850 Brackt HCR.8.2754.1400 HCR-2754-180 HCR-2754-220 HCR-2754-280 89 3 3.2202
90
Sliding clamp, classic singl acting, with spring rturn Applications: th classic sliding clamp is a vry sturdy hydraulic clamping lmnt, usd with low spac rquirmnts for clamping and locking on machins and plants, on prss bd and ram. th us is possibl at ambint tmpraturs up to a maximum of 120 C. Installation option adaptr Clamping block Prss tool Prss bd Application xampls Function: Manual positioning of th sliding clamp in th s of th prss ram or bd. Clamping on th di clamping dg by th application of hydraulic prssur to th piston and unclamping by spring forc. Th classic sliding clamp consists of a hydraulic clamping block which will b fixd with two scrws to a adaptr. Th clamping block can also b dirctly scrwd without adaptr and can b ordrd sparatly. Advantags: optimum forc transmission clamping forc from 19 kn up to 78 kn asy mounting suitabl for larg clamping dg tolrancs no colliding dgs whn insrting th dis 18, 22, 28 and 36 mm ar availabl total strok 8 and 12 mm di standardization with rgard to th width and dpth is not rquird asy to rtrofit l j k m Sliding clamp with adaptr in prss bd and ram, rollr bars and carrying consols for tool insrtion. Clamping block j sparatly mountd on bars, ball bars k in th prss bd, carrying consols in front. Block cylindrs l and swing clamps m for positioning. 91 1 3.2204
i f Sliding clamp, classic singl acting, with spring rturn a a1 b r d G ¼ p s t Hydraulic sliding clamp complt, with adaptr n Clamping block Minimum insrtion dpth Fixing scrw d1 1 x 3 conncting possibilitis g o Strok can b rmovd on rqust h c adaptr k m Functional dimnsion "f": = ½ strok + di clamping hight + wb hight of th Plas spcify whn ordring. Exampl of ordring HCR-8.2202.1850.F60 ½ strok Clamping dg Wb hight 45 Sliding clamp Clamping forc: 19.6 kn 18 mm Functional dimnsion f [mm] Plas spcify whn ordring as pr DIN 650 [mm] Clamping forc at 400 bar [kn] Strok [mm] Oil volum [cm³] Dimnsion "f" min.[mm] Dimnsion "f" max.[mm] a [mm] a1 [mm] b [mm] c [mm] d [mm] d1 [mm] (min. insrtion dpth) [mm] 1 [mm] g [mm] h [mm] i [mm] k [mm] m [mm] n (scrw DIN 912, 10.9) o [mm] p [mm] r [mm] s [mm] t [mm] x [mm] Clamping block with adaptr Wight [kg] Clamping block, sparat Wight [kg] Plas consult us if aggrssiv spray is usd. Max. oprating prssur 400 bar, max. oprating tmpratur 120 C. Furthr sizs and spcial vrsions ar availabl on rqust. 3.2204 18 22 22 22 28 28 28 19.6 19.6 32 50 32 50 78 8 8 8 8 8 8 12 4 4 7 10 7 10 24 42 50 50 50 55 55 60 90 106 106 106 112 112 117 95 95 104 111 104 111 2 77 77 81 85 81 85 99 65 65 65 65 65 65 80 40 40 47 50 47 50 75 25 25 32 40 32 40 50 15 15 15 20 15 20 25 23 23 28 31 28 31 38 32 32 41 48 41 48 60 24 32 32 32 42 42 42 25 30 30 30 37 37 37 10 14 14 14 18 18 18 18 22 22 22 28 28 28 28 35 35 35 44 44 44 M 16 M 16 M 16 M 16 M 16 M 16 M 20 18 18 20 20 20 20 28 36 36 36 36 36 36 43 50 50 50 50 50 50 57 12 12 12 12 12 12 17.5 24 24 29 32 29 32 53 95 104 104 104 104 104 2 2.9 3.2 4.0 4.3 4.5 4.7 9.3 HCR-8.2202.1850 HCR-8.2202.2250 HCR-8.2203.2250 HCR-8.2204.2250 HCR-8.2203.2850 HCR-8.2204.2850 HCR-8.2205.2850 (supplid 1.6 without 1.6 fixing scrws) 2.0 2.3 2.0 2.3 4.9 HCR-8.2202.01 HCR-8.2202.01 HCR-8.2203.01 HCR-8.2204.01 HCR-8.2203.01 HCR-8.2204.01 HCR-8.2205.01 2 92
Sliding clamp, classic singl acting, with spring rturn 1/2 Strok Brackt Spacr bar Distanc dimnsion x : x = f + i - g - ½ strok Dimnsion x to b quotd in th ordr Parking station accommodats th sliding clamp during di chang as pr DIN 650 (mm) a (mm) k (mm) i (mm) g (mm) Parking station complt with brackt and spacr bar Brackt 18 22 28 25 33 43 30 37 46 10 14 18 24 32 42 HCR-8.2754.1850 HCR-8.2754.2250 HCR-8.2754.2850 HCR-2754-180 HCR-2754-220 HCR-2754-280 3.2204 93 3
Sliding clamp, classic singl acting, inch/asa Sliding clamp complt (inch) Clamping forc (lbs) 4,300 HCR-8.2202.50 7,200 HCR-8.2203.50 11,300 HCR-8.2204.50 7,200 HCR-8.2203.1750 11,300 HCR-8.2204.1750 17,600 HCR-8.2205.1750 Strok Hydraulic clamping block adaptr Exampl of ordring: HCR-8.2202.50/ F3125 Fastning bolt Sliding clamp Clamping forc 4,300 lbs as pr ASA (inch) Clamping forcat 5,800 psi (lbs) 4,300 7,200 11,300 7,200 11,300 17,600 Strok (inch) 0.315 0.315 0.315 0.315 0.315 0.472 Oil consumption (in 3 ) 0.250 0.430 0.610 0.430 0.610 1.460 a (inch) 3.740 4.095 4.370 4.095 4.370 5.196 a1 (inch) 3.031 3.189 3.346 3.189 3.346 3.897 b (inch) 2.559 2.559 2.559 2.559 2.559 3.149 c (inch) 1.574 1.850 1.968 1.850 1.968 2.952 d (inch) 0.984 1.259 1.574 1.259 1.574 1.968 d1 (inch) 0.590 0.590 0.787 0.590 0.787 0.984 (inch) 0.926 1.103 1.221 1.103 1.221 1.497 1 (inch) 1.890 1.890 1.890 1.890 1.890 2.361 g (inch) 1.024 1.024 1.024 1.378 1.378 1.378 h (inch) 1.173 1.173 1.173 1.375 1.375 1.375 i (inch) 0.515 0.515 0.515 0.703 0.703 0.703 k (inch) 0.783 0.783 0.783 1.033 1.033 1.033 m (inch) 1.299 1.299 1.299 1.654 1.654 1.654 Wight (lb) 7.9 8.8 9.5 11.3 12 17.7 max. oprating prssur 5,800 psi Plas consult us if aggrssiv spray is usd /16 inch Functional dimnsion f (inch) to b quotd in th ordr Functional dimnsion f : ½ strok + hight of di clamping dg + wb hight of = dimnsion f Min. dpth of insrtion Piston strok Clamping dg of th di Wb hight Parking station accommodats th clamping lmnt during di chang 4.72 3.93 as pr ASA (inch) a (inch) 1.299 1.693 k (inch) 1.456 1.811 i (inch) 0.515 0.703 g (inch) 1.024 1.378 Parking station complt with holdr and ldg HCR-2754-220-XXXX HCR-2754-280-XXXX Holdr HCR-2754-220 HCR-2754-280 Spacr ldg HCR-2754-220-XXXX-SP HCR-2754-280-XXXX-SP 2.36 1.18 0.2 0.433 Holdr Strok Distanc x : x = f + i - g - ½ strok For suitabl powr units plas rfr to product group 7 For hydraulic hoss plas rfr to product group 11 Spacr ldg Dimnsion x to b quotd in th ordr 3.2204.US 94