Exhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000)

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000/3000/5000 Large flow capacity Yet compact size. Low power consumption 1.8 W (DC) Exhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (1000/3000) R S S 1000 C: 0.53 dm 3 /(s bar) {4/ 5/3 (A/B EA/EB)} 6.4 mm width 3000 C: 3.1 dm 3 /(s bar) {4/ 5/3 (A/B EA/EB)} 6.4 mm width 5000 C: 1 dm 3 /(s bar) {4/ 5/3 (A/B EA/EB)} 3 mm width 3-4-1

Series 1000/3000/5000 Many combinations available to fit your needs. Series Variations/Port Size 1000 1000 position single position double 1 8 3000 5000 1 8 3 8 3000 position single position double 3 position closed center 3 position exhaust center 3 position pressure center 3 8 1 5000 position single position double 3 position closed center 3 position exhaust center 3 position pressure center Piping Body ported 1000 3000 5000 Base mounted 3000 5000 Pilot Exhaust Pilot valve individual exhaust (Standard) Pilot exhaust port Common exhaust type for main and pilot valve (1000, 3000) Manual Override (Illustration: 3000) (With sub-plate) Push type Locking type B (Slotted) Locking type C (Manual) Rated Voltage AC/ 100 V, 00 V, 1 V, 4 V, 48 V, 110 V, 0 V 40 V DC/ 4 V, 6 V, 1 V 48 V, 100 V 110 V ( Option) Surge Voltage Suppressor/Indicator Light With surge voltage suppressor (S) (Grommet type) With light/surge voltage suppressor (Z) (Grommet terminal) (Conduit terminal) (DIN terminal) L plug connector M plug connector Light Surge voltage suppressor Electrical Entry Grommet (G) Grommet terminal (E) Conduit terminal (T) DIN terminal (D), (Y) L plug connector (L) Note) M plug connector (M) Note) Note) 1000/3000 only. Manifold Variations 1000 3000 5000 Manifold type B mount A, B port Valve VV5F1-30 VV5F3-30 VV5F3-60 VV5F5-0 EXH type Manifold type CYL port EXH type Manifold type CYL port EXH type Manifold type A, B port EXH type Common, Individual B mount Valve, Base Common, Individual S mount Valve Common, Individual B mount Valve, Base Common 3-4-

Series 1000/3000/5000 Precautions Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page 3-13-. Voltage model AC DC Light/Surge Voltage Suppressor Common Exhaust Type for Main and Pilot Interchangeability with V1000 and V3000 Caution Circuit Surge voltage suppressor Light/Surge voltage suppressor Surge voltage suppressor Light/Surge voltage suppressor Symbol S Z S Z Grommet (G) Varistor Red Black Coil Grommet terminal (E) Conduit terminal (T) DIN terminal (Y) L plug connector (L) M plug connector (M) Neon bulb EZ, TZ, DZ, LZ, MZ (100 VAC or more) EZ, TZ, DZ, LZ, MZ (4 VAC or less) Neon bulb EZ, TZ, DZ, LZ, MZ (100 VDC or more) EZ, TZ, DZ, LZ, MZ (4 VDC or less) Note) W/surge voltage suppressor is available only for grommet type. Coil Coil Coil Coil Exhaust air from pilot valve will flow to main valve exhaust port. Exhaust air from main valve will not flow to pilot valve side due to a check valve. Purpose Not to exhaust mist from PE (Pilot Exhaust) port to protect the surrounding environment To lower the exhaust noise from PE port when switching valve. To prevent silencer mounted to PE port from getting plugged in dusty environments. Caution Common exhaust valves are effective for use with common exhaust manifolds, however an exhaust cleaner (Series AMC) should be installed when used in this manner. Make sure the exhaust port operates properly after installing the exhaust cleaner. Plugging one of the cylinder ports (A or B) enables use as a normally closed (N.C.) or normally open (N.O.) 3 port valve. It is convenient when 3 port valve is needed on a manifold, etc., but it can t be used in special applications such as using as a non-leakage valve. Use it with the exhaust port leaving open. Plug Type of actuation Number of solenoids Single Double Used as a 3 Port Valve B port (CYL. 1 port) N.C. (X) plug (X) plug A port (CYL. port) N.O. (X) plug (X) plug V1000 and V3000 are respectively interchangeable with 1000 and 3000. Mounts are the same however, care must be taken because the main valve switching differs from the 3000 to the V3000. 1. When cylinder port is body ported. Port position of CYL1 and CYL are opposites. Make sure of the port symbol and pipe so that back actuation does not occur. 3000 V3000 B(CYL.1) A(CYL.) CYL. CYL.1. When cylinder port is base mounted. When the 3000 is installed on sub plate or base mounted manifold (B1, B) in the same position with V3000, air flow will be reversed. Follow either of these installation procedures. A. Install the 3000 on the sub-plate or manifold base in the opposite direction. B. Install the 3000 in the same position as the V3000 but reverse the piping of the CYL port. Grommet with surge voltage suppressor at DC voltage has +/ direction. Connect to the power source as follows. DIN connection and Terminal connection are free from +/ direction. Connect no.1 and terminals to the power source. For Grommet Lead wire color Wiring DIN terminal and Terminal With DIN terminal block Wiring Red Black + With terminal block R S S Ground Type D : mm Type Y : ø4.5 to ø7 mm Type T : mm Type E : ø.3 to ø.8 mm Applicable crimp terminal Type E, T: 1.5-3, 1.5-3S, 1.5Y-3N, 1.5Y-3S Type R or Type Y crimp terminal can not be used in Type D, Y. ( ) 3-4-3

Series 1000/3000/5000 Port Symbol Caution 1000 3000 5000 Supply P P (SUP) P Cylinder A (CYL) A, B B (CYL1) A, B EXH outlet EA, EB R1 (EXH) R (EXH1) R1, R. Detaching To detach a socket from a connector, pull out the lead wire while pressing the socket s hook with a stick having a thin tip (approx. 1 mm). If the socket will be used again, first spread the hook outward. Connector Lead wire JIS symbol Single solenoid 1: P 4: A : B 5: R1 3: R 1: P (SUP) : B (CYL.1) 3: R (EXH.1) 4: A (CYL.) 5: R1 (EXH.) 1: P : B 3: R 4: A 5: R1 Attaching and Detaching Connectors 1. To attach a connector, hold the lever and connector unit between your fingers and insert straight onto the pins of the solenoid valve so that the lever s pawl is pushed into the groove and locks.. To detach a connector, remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. Type L Type M Crimping the Lead Wire and Socket Peel 3. to 3.7 mm of the tip of lead wire, enter the core wires neatly into a socket and crimp it with a special crimp tool. Be careful so that the cover of lead wire does not enter into the crimping part. Core wire Socket crimping area Hook Groove Pin Cover Connector Pin Cover Crimping area Core wire Lead wire Insulation DC indicator Lever DC coil + Red, Black Black Red Lead wire Socket DXT170-71-1 0. to 0.33 mm Max. cover diameter ( : ø1.7 mm ) Attaching and Detaching Lead Wires with Sockets 1. Attaching Insert the sockets into the square holes of the connector (with + and indication) and, continue to push the sockets all the way in until the lock by hooking into the seats in the connector. (When they are pushed in, their hooks open and they are locked automatically.) Then confirm that they are locked by pulling lightly on the lead wires. Socket Plug Connector Lead Wire Length Standard length is 300 mm, but the following lengths are also available. DXT170 Hook How to Order Connector Assembly 80 A Lead wire color Lead wire Symbol with socket Note Nil Socket only Without lead ( pcs.) wire 1 3 Blue () Red () Gray () For 100 VAC For 00 VAC Another VAC 4 Red: +, Black: For DC Lead wire length Lead wire Symbol length L (mm) Nil 300 6 600 10 1000 15 1500 0 000 5 500 30 3000 How to Order Include the connector assembly part number together with the part number for the plug connector's solenoid valve without connector. (Example) 000 mm lead wire length. 330-5M0-0 3 pcs. DXT170-80-4A-0 6 pcs. Mounting of Solenoid Valve and Pilot Install so that there is no slippage of a gasket, nor deformation, then tighten with the following tightening torque. Model Pilot valve Series 1000 Series 3000 Series 5000 Tightening torque 0.6 N m 1.4 N m 1.4 N m 1.4 N m Mounting Screw, Manifold Gasket Model Mounting screw Gasket 1 30 1 33 Round head DXT144-1 3 30 combination screw 3 33 DXT031-44-1 DXT155-5-1 3 40 M4 x 39.5 3 43 With washer DXT031-30- 3 50 Hexagon socket 5 0 head screw DXT156-9-1 AXT60-3-1 5 44 M4 x 48 DXT156-9- With washer How to Calculate the Flow Rate For obtaining the flow rate, refer to page 3-1-10. 3-4-4

For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000 Compact and lightweight: 6.4 mm width Compact yet provides a large flow capacity: Sonic conductance C: 0.53 dm 3 /(s bar) {4/ 5/3 (A/B EA/EB)} Low power consumption: 1.8 W (DC) 10 (DIN terminal) 10 (Grommet terminal) 10 (Grommet) 10 (M plug connector) 10 (L plug connector) 110 (DIN terminal with bracket) 110 (Grommet) 110 (Grommet terminal) 110 (M plug connector) 110 (L plug connector) Specifications Fluid Operating pressure range position single position double Air 0.15 to 0.9 MPa 0.1 to 0.9 MPa 10 to 50 C (No freezing. Refer to page 3-13-4.) 0 ms or less (at the pressure of 0.5 MPa) 10 Hz Not required Non-locking push, Locking slotted, Locking knob Unrestricted 300/50 m/s Dustproof Individual exhaust, Common exhaust for main valve and pilot valve Ambient and fluid temperature Response time (1) Max. operating frequency Lubrication Mounting orientation Shock/Vibration resistance () Enclosure Pilot valve EXH Note 1) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature: 0 C, at rated voltage, without surge suppressor) Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Electrical entry Coil rated voltage (V) AC 50/60 Hz DC Allowable voltage fluctuation Apparent power Note) AC Inrush Holding Power consumption Note) Light/Surge voltage suppressor DC AC DC Option Note) At rated voltage Option Description Bracket Silencer Throttle valve Grommet, Grommet terminal, Conduit terminal DIN terminal, L plug connector, M plug connector 100, 00, 1, 4, 48, 110, 0, 40 4, 6, 1, 48, 100, 110 15 to +10% of rated voltage 5.6 VA (50 Hz), 5.0 VA (60 Hz) 3.4 VA (50 Hz),.3 VA (60 Hz) 1.8 W, W (With indicator light) ZNR (Varistor), Neon bulb (LED100 V or less) ZNR (Varistor), LED (Neon bulb100 V or more) Part no. Note DXT144-8-1A For 10 DXT144-8-3A For 110 AN10-M5 M5 x 0.8 DXT154-34-1A With element R S S JIS Symbol Single 110 Double 10 Flow Characteristics/ Weight Valve model Type of actuation Port size Body ported 110 10 position single position double 1 8 1 8 Note) Weight stands for grommet type. 1 4/ (P A/B) 4/ 5/3 (A/B EA/EB) C [dm 3 /(s bar)] 0.76 0.76 Flow characteristics b 0. 0. Cv C [dm 3 /(s bar)] b Cv 0.17 0.17 0.53 0.53 0.8 0.8 0.13 0.13 Weight (kg) 0.16 0.5 Note) Manifold Note) Applicable manifold type Model Type Exhaust A, B port Type 30 Common Valve 1 30- -01 B mount Type 31 Individual Valve Note) For common exhaust type for main and pilot valve, model number will be 113c, 13c. 3-4-5

Series 1000 How to Order Body ported 1 1 0 1 L 01 Manifold 1 1 3 0 Type of actuation 1 Single solenoid Double solenoid Construction Single solenoid Body option 0 Standard Common exhaust 3 type for main and pilot valve Option Coil rated voltage 1 3 4 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 110 V to 10 VAC, 50/60 Hz 0 VAC, 50/60 Hz 5 4 VDC 6 1 VDC 7 40 VAC, 50/60 Hz 9 Other Option L, M plug connector: Max. 0 VAC Port size (P, A, B) 1 L 01 Electrical entry G Grommet (Lead wire: 300 mm) Grommet (Lead wire: 600 mm) Grommet terminal Conduit terminal H E T D DO L DIN terminal L plug connector M5 01 M5 x 0.8 1 8 EA, EB port: M5 x 0.8 With connector Without connector With lead wire LN Without lead wire LO Without connector M With lead wire M plug MN Without lead wire connector MO Without connector Light/Surge voltage suppressor Nil Z S Thread type Nil F N T M5 01 Nil B C Rc G NPT NPTF Option Non-locking push type Locking type B Locking type C With surge voltage suppressor How to Order Pilot Valve Assembly SF4 1 DZ 50 F Only when 01 (1/8) With bracket Not installed when delivered Port size (A, B) M5 x 0.8 1 8 Indicator light is not available for grommet type. W/surge voltage suppressor is available for grommet type only. Double solenoid Component Parts No. q w e r t y u Description Body Adapter plate End cover Pilot body Pilot cover Piston Spool valve Replacement Parts Material Aluminum die-casted Resin Aluminum die-casted Resin Resin Resin Aluminum, NBR Note Platinum silver Black Black No. Description Material Part no. i Pilot valve assembly Note) SF4- -50 Note) Refer to How to Order Pilot Valve Assembly on the right above. (A) Coil rated voltage 1 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 3 110 to 10 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 1 VDC 7 40 VAC, 50/60 Hz 9 Other Option (C) Manual override Nil B C (A) (B) (C) Non-locking push type Locking type B Locking type C (B) Electrical entry, Light/surge voltage suppressor Symbol G GS H HS E EZ T TZ D DZ DO Note) Interchangeable with the previous model DXT154-A- Electrical entry Light/Surge voltage suppressor Lead wire length Grommet 300 mm With surge voltage suppressor Lead wire length 600 mm With surge voltage suppressor Grommet terminal Conduit terminal With connector DIN terminal DOZ L LZ LN L plug LNZ connector LO LOZ M MZ MN M plug MNZ connector MO MOZ Without connector With lead wire Without lead wire Without connector wire Without lead wire Without connector With lead 3-4-6

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000 Position Single Solenoid Grommet: 110- G- M5 01 Grommet terminal: 110- E- M5 01 M5 x 0.8, Rc 1/8 (P port) (EA, EB port) -M4 x 0.7 depth 4 (Mounting screw) Bracket Manual override -M5 x 0.8, Rc 1/8 (A, B port) -M4 x 0.7 depth 5 (Mounting screw) (EA, EB port) Bracket Conduit terminal: 110- T- M5 01 DIN terminal: 110- D- 110- Y- ø.3 to ø.8 ( ): M5 x 0.8 M5 01 M5 01 3-M5 x 0.8, Rc 1/8 R S S Applicable cable O.D. D: Manual override (EA, EB port) Bracket 3-M5 x 0.8, Rc 1/8 (EA, EB port) Bracket 3-M5 x 0.8, Rc 1/8 ( ): M5 x 0.8 ( ): M5 x 0.8 3-4-7

Series 1000 Position Single Solenoid L plug connector: 110- L - M5 01 Light window () Manual override (EA, EB port) 3-M5 x 0.8, Rc 1/8 -M4 x 0.7 depth 4 (Mounting screw) -M4 x 0.7 depth 5 (Mounting screw) ( ): M5 x 0.8 M plug connector: 110- M - M5 01 Light window () (EA, EB port) 3-M5 x 0.8, Rc 1/8 -M4 x 0.7 depth 4 (Mounting screw) -M4 x 0.7 depth 5 (Mounting screw) ( ): M5 x 0.8 3-4-8

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000 Position Double Solenoid Grommet: 10- G- M5 01 Grommet terminal: 10- E- M5 01 (EA, EB port) ø.3 to ø.8 Bracket (EA, EB port) 3-M5 x 0.8, Rc 1/8 -M4 x 0.7 depth 5 (Mounting screw) Bracket ( ): M5 x 0.8 Conduit teminal: 10- T- M5 01 DIN terminal: 10- D- 10- Y- (EA, EB port) (EA, EB port) M5 01 M5 01 3-Rc 1/8 D: R S S Pg.9 Bracket 3-M5 x 0.8, Rc 1/8 Bracket 3-M5 x 08, Rc 1/8 3-4-9

Series 1000 Position Double Solenoid L plug connector: 10- L - M5 3-M5 x 0.8, Rc 1/8 (EA, EB port) 01 Light window () Option Specifications: Silencer Model AN10-M5 AN110-01 Maximum operating pressure 1.0 MPa 1.0 MPa Fluid temperature 5 to 60 C 5 to 60 C Noise reduction 18 db or more 1 db or more Effective area 5 mm 35 mm Port size M5 x 0.8 R 1 8 Material Body BC-6 BC-6 Weight 3.3 g 0 g Application Single unit, Manifold Manifold (Individual EXH type) (Common EXH type) At 0.5 MPa Dimensions: Silencer Port size -M4 x 0.7 depth 4 (Mounting screw) Type AN10-M5 AN110-01 A 17 38 Dimensions B 5 6 C 8 13 M plug connector: 10- M - M5 01 3-M5 x 0.8, Rc 1/8 (EA, EB port) Light window () Flow Characteristics: Throttle Valve DXT154-34-1A Effective area (mm ) Number of needle rotations (turns) Effective area: S =. mm, Cv = 0.1 Air passage: A port EA port (Throttle valve) Dimensions: Throttle Valve DXT154-34-1A Air EXH. Width across flats -M4 x 0.7 depth 5 (Mounting screw) 3-4-10

Series 1000 Manifold Specifications VV5F1-31 Manifold Specifications Manifold type Max. number of stations B mount (Single base type) Max. 0 stations Note) Note) For more than 8 stations, supply air to both sides of P port and exhaust air from both sides of R port. Manifold base model VV5F1-30 VV5F1-31 Exhaust port type Common EXH Individual EXH Piping/Port location Port size P R (E) A, B P R (E) A, B Side Side Top Base Base Valve 1 8 1 8 1 8 Side Side Top Base Base Valve 1 8 M5 1 8 Note 1) Supply (P port) is common. Note ) Direction of single solenoid: Same side of P(SUP) port. Applicable valve model 1 30 1 33 R VV5F1-30 Option Description Throttle valve Silencer Blanking plate assembly Part no. DXT154-34-1A AN10-M5 AN110-01 DXT144-13-A Applicable manifold model VV5F1-31 VV5F1-31 VV5F1-30 VV5F1-30/31 S S How to Order Manifold Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) VV5F1-30-051 1 pc. (Manifold base) 130-1G-01 pcs. (Valve) 1130-1G-01 pcs. (Valve) DXT144-13-A 1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. B Mount (Integrated type) Common SUP/Individual EXH type Type 30 VV5F1 30 05 1 A, B port Common SUP/Individual EXH type Type 31 A, B port R port P port Stations 0 stations 0 0 stations VV5F1 31 05 3 Applicable solenoid valve 1 1 30- - 1 1 33- - Applicable blanking plate assembly DXT144-13-A Stations 0 stations 0 0 stations EA, EB port P port 3-4-11

Series 1000 Manifold Common EXH: VV5F1-30- 1 Double n-m5 x 0.8, Rc 1/8 4-Rc 1/8 (P, R port) Single (Pitch) (Mounting hole) P, E port (Pilot EXH) ø.3 to ø.8 D: L ( ): M5 x 0.8 Individual EXH: VV5F1-31- 3 L Dimension L1 L n 74.5 64.5 n-m5 x 0.8, Rc 1/8 (A, B port) 3 10 9 4 19.5 119.5 PE port (Pilot EXH) 5 157 147 6 184.5 174.5 7 1 0 8 39.5 9.5 9 67 57 ø.3 to ø.8 10 94.5 84.5 11 3 31 1 349.5 339.5 13 377 367 14 404.5 394.5 15 43 4 16 459.5 449.5 17 487 477 18 514.5 504.5 n: Stations 19 54 53 D: 0 569.5 559.5 -Rc 1/8 (P port) (Pitch) (ø8. through hole) (EA, EB port) ( ): M5 x 0.8 L Dimension L L1 L n 74.5 64.5 3 10 9 4 19.5 119.5 5 157 147 6 184.5 174.5 7 1 0 8 39.5 9.5 9 67 57 10 94.5 84.5 11 3 31 1 349.5 339.5 13 377 367 14 404.5 394.5 15 43 4 16 459.5 449.5 17 487 477 18 514.5 504.5 n: Stations 19 54 53 0 569.5 559.5 3-4-1

For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 Compact and lightweight: 6.4 mm width Compact yet provides a large flow capacity: Sonic conductance C: 3.1 dm 3 /(s bar) {4/ 5/3 (A/B EA/EB)} Low power consumption: 1.8 W (DC) 330 (DIN terminal) 330 (Grommet) 3330 (M plug connector) 330 (L plug connector) 3540 (Conduit terminal) 31 (Grommet with bracket) Body ported 3130 (Grommet) 3130 (M plug connector) 3130 (L plug connector) 340 (DIN terminal) Specifications Fluid Operating pressure range Ambient and fluid temperature (1) position single/double Response time 3 position Max. operating position single/double frequency 3 position Lubrication Mounting orientation Shock/Vibration resistance () Enclosure Pilot valve EXH Option position single/3 position position double Air 0.15 to 0.9 MPa 0.1 to 0.9 MPa 10 to 50 C (No freezing. Refer to page 3-13-4.) 0 ms or less (at the pressure of 0.5 MPa) 40 ms or less (at the pressure of 0.5 MPa) 10 Hz 3 Hz Not required Non-locking push, Locking slotted, Locking knob Unrestricted 300/50 m/s Dustproof Individual exhaust, Common exhaust for main valve and pilot valve Note 1) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature: 0 C, at rated voltage, without surge suppressor) Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Electrical entry AC 50/60 Hz Coil rated voltage (V) DC Allowable voltage fluctuation Note) Inrush Apparent power AC Holding Power consumption Note) DC AC Light/Surge voltage suppressor DC Option Note) At rated voltage Description Bracket Silencer Part no. DXT031-40-3A AN110-01 Grommet, Grommet terminal, Conduit terminal DIN terminal, L plug connector, M plug connector 100, 00, 1, 4, 48, 110, 0, 40 4, 6, 1, 48, 100, 110 15 to +10% of rated voltage 5.6 VA (50 Hz), 5.0 VA (60 Hz) 3.4 VA (50 Hz),.3 VA (60 Hz) 1.8 W, W (With indicator light) ZNR (Varistor), Neon bulb (LED 100 V or less) ZNR (Varistor), LED (Neon bulb100 V or more) Applicable valve model For 31 only R 1 8 R S S JIS Symbol Single 3130 Closed center 3330 Exhaust center 3430 Pressure center 3530 3140 (Grommet terminal) 3140 (Grommet) Double 330 340 (L plug connector) 340 (M plug connector) Base Mounted (With sub-plate) 3-4-13

Series 3000 Flow Characteristics/Weight Body ported (3) Base mounted Flow characteristics Model (1) () Type of actuation Port size 1 4/ (P A/B) 4/ 5/3 (A/B EA/EB) C C b Cv [dm 3 b Cv /(s bar)] [dm 3 /(s bar)] 31- -01-F position single position single 3.0 3.0 0.38 0.38 0.78 0.78.8.8 0.30 0.30 0.67 0.67 position double 3.0 0.38 0.78.8 0.30 0.67 1/8 3 30- -01 3 position closed center.4 0.31 0.64 1.8 0.37 0.46 31- -0-F 3 position exhaust center 3 position pressure center position single position single.6 3.0 [1.4] 4.0 4.0 0.37 0.4 [0.44] 0.36 0.36 0.70 0.83 [0.39] 1.0 1.0 3.0 [.5].4 3.1 3.1 0.3 [0.8] 0.7 0.3 0.3 0.76 [0.6] 0.59 0.75 0.75 position double 4.0 0.36 1.0 3.1 0.3 0.75 1/4 3 30- -0 3 position closed center.4 0.45 0.68 1.9 0.37 0.47 3 40- -0 3 40- -03 3 position exhaust center 3 position pressure center position single position double 3 position closed center 3 position exhaust center 3 position pressure center position single position double 3 position closed center 3 position exhaust center 3 position pressure center 1/4 3/8 3.0 5.5 [1.4].8.8.1.3.9 [1.1] 3.1 3.1..6 3.4 [1.3] 0.4 0.37 [0.50] 0.14 0.14 0. 0.1 0.16 [0.45] 0.4 0.4 0.33 0.7 0.9 [0.48] 0.8 1.4 [0.40] 0.64 0.64 0.49 0.53 0.67 [0.3] 0.76 0.76 0.57 0.61 0.80 [0.38] 3.1 [.7].6.5.5 1.6.8 [.1].1.6.6 1.6.8 [.3]. 0.36 [0.9] 0.3 0.18 0.18 0.6 0.3 [0.6] 0.3 0.3 0.3 0.34 0.30 [0.8] 0.31 0.79 [0.66] 0.64 0.57 0.57 0.41 0.66 [0.50] 0.49 0.6 0.6 0.40 0.68 [0.55] 0.5 Note 1) For common exhaust type for main and pilot valve, model number will be V3 43, 3 43 Note ) In the case of body ported, exhaust port is only Rc 1/8. Note 3) With sub-plate Note 4) Weight stands for grommet type. Note 5) [ ]: Denotes normal position. How to Order Pilot Valve Assembly SF4 1 DZ 50 (A) (B) (C) (A) Coil rated voltage 1 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 3 110 to 10 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 1 VDC 7 40 VAC, 50/60 Hz 9 Other Option Interchangeable with the previous model, DXT154-A-. (C) Nil B C Non-locking push type Locking type B Locking type C (B) Electrical entry, Light/Surge voltage suppressor Symbol G Electrical entry Lead wire length Light/Surge voltage suppressor GS 300 mm With surge voltage suppressor Grommet H Lead wire length HS 600 mm With surge voltage suppressor E Grommet terminal EZ T TZ D DZ DO DOZ L LZ LN LNZ LO LOZ M MZ MN MNZ MO MOZ DIN terminal L plug connector M plug connector Conduit terminal With connector Without connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector (4) Weight (kg) 0.4 0.1 0.9 0.44 0.44 0.44 0.4 0.1 0.9 0.44 0.44 0.44 0.38 0.47 0.61 0.61 0.61 0.38 0.47 0.61 0.61 0.61 Manifold Model Note) Manifold type Type EXH A, B (CYL) port 3 30- - 01 0 3 40- B mount Type 30 Type 40 Common Common Valve Base 3 50- Type 50 Individual Base 3 60- - 01 0 Type 60, 61 Common Valve S mount 3 70- - 01 0 Type 70, 71 Individual Valve Note) For common exhaust type for main and pilot valve, model number will be 3 33, 3 43, 3 63. 3-4-14

5 Port Pilot Operated Solenoid Valve Rubber Seal How to Order Series 3000 Body option 0 Standard 3 Common exhaust type for main and pilot valve Option Port size 01 1 8 0 R1, R, Rc 1 8 Thread type Nil F N T Rc G NPT NPTF Body ported single solenoid with bracket Body ported For type 30 manifold Base mounted For type 40 manifold For type 50 manifold For type 60, 61 70, 71 manifold Type of actuation 1 Single solenoid Double solenoid 3 Closed center 4 Exhaust center 5 Pressure center 6 7 Body type For type 60 and 61 manifolds For type 70 and 71 manifolds 31 1 G 0 F 3 1 3 0 1 G 0 3 0 1 G 0 3 1 50 1 G 3 1 6 0 1 G 0 Body option 0 Standard Common exhaust type for main and pilot valve Note) 3 Option Note) 3 63 only Rated voltage 1 3 4 5 6 7 9 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 110 V to 10 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC 1 VDC 40 VAC, 50/60 Hz Other Option L, M plug connector: Max. 0 VAC Light/Surge voltage suppressor Nil Electrical entry G H E T D DO L LN LO M MN MO Z S Nil B C With surge voltage suppressor Grommet (Lead wire: 300 mm) Grommet (Lead wire: 600 mm) Grommet terminal Conduit terminal DIN terminal Non-locking push type Locking type B Locking type C Indicator light is not available for grommet type. W/surge voltage suppressor is available for grommet type only. L plug connector M plug connector With connector Without connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Option F With bracket Not installed when delivered. Port size Sub-plate Nil 0 03 3 8 Port size (A, B port) 01 1 8 0 R port of 3 70 is Rc. R S S 3-4-15

Series 3000 Construction Single solenoid Double solenoid 3 position closed center Component Parts No. q w e r t y u Description Body Adapter plate End cover Pilot body Pilot cover Piston Spool valve Material Aluminum die-casted Resin (1) Aluminum die-casted Resin Resin Resin () Aluminum, NBR No. i With Bracket/Body Ported: Position Single Solenoid Grommet: 31- G- Note Platinum silver Black (3) Black 01 0 F Replacement Parts o Description Part no. Note Sub-plate DXT031-41-3 P 3 8 DXT031-41-4 P Aluminum die-casted Pilot valve assembly SF4- -50 Refer to How to Order on page 3-4-14. Note 1) 3 position: Zinc die-casted Note ) 3 position: Aluminum Note 3) 3 position: Metallic paint Sub-plate Part No. DXT031 3 4 P Thread type Nil Rc F G N NPT T NPTF (EXH port) 3-Rc 1/4, 1/8 (SUP., CYL port) 3-4-16

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 Body Ported: Position Single Solenoid Grommet: 3130- G- 01 0 Grommet terminal: 3130- E- 01 0 3-Rc 1/4, 1/8 (Mounting hole for manifold) -ø4. -Rc 1/8 (R1, R port) 3-Rc 1/4, 1/8 (Mounting hole for manifold) Conduit terminal: 3130- T- 01 0 DIN terminal: 3130- D- 3130- Y- 01 0 01 0 Y: 10.5 D: 11 ø.3 to ø.8 -ø4. R S S 3-Rc 1/4, 1/8 3-Rc 1/4, 1/8 (Mounting hole for manifold) (Mounting hole for manifold) D: -ø4. -ø4. 3-4-17

Series 3000 Body Ported: Position Single Solenoid L plug connector: 3130- L - 01 0 Light window () (Mounting hole for manifold) 3-Rc 1/8, 1/4 -ø4. (R1, R port) M plug connector: 3130- M - 01 0 Light window () (Mounting hole for manifold) 3-Rc 1/8, 1/4 -ø4. (R1, R port) 3-4-18

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 Body Ported: Position Double solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: 3 30- G- 01 0 Grommet terminal: 3 30- E- 01 0 135 (3 position: 155.5) 83 (3 position: 103.5) 83 (3 position: 103.5) 3-Rc 1/4, 1/8 73 (3 position: 93.5) -ø4. 158.5 (3 position: 179) 6 (3 position: 73) (R1, R port) 3-Rc 1/4, 1/8 Conduit terminal: 3 30- T- 01 0 DIN terminal: 3 30- D- 3 30- Y- ø.3 to ø.8 73 (3 position: 93.5) 01 0 01 0 -ø4. 160 (3 position: 180.5) R S S 181 (3 position: 01.5) 83 (3 position: 103.5) Y: 180 (3 position: 00) D: 181 (3 position: 01) 83 (3 position: 103.5) 3-Rc 1/4, 1/8 3-Rc 1/4, 1/8 (Mounting hole for manifold) 73 (3 position: 93.5) (Mounting hole for manifold) 73 (3 position: 93.5) D: -ø4. 158.5 (3 position: 179) -ø4. 158.5 (3 position: 179) 3-4-19

Series 3000 Body Ported: Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center L plug connector: 3 30- L - 01 0 160.5 (3 position: 181) 150 (3 position: 170.5) 73 (3 position: 93.5) Light window () (Mounting hole for manifold) 3-Rc 1/8, 1/4 -ø4. 158.5 (3 position: 179) 6 (3 position: 73) (R1, R port) M plug connector: 3 30- M - 01 0 184 (3 position: 04.5) 73 (3 position: 93.5) Light window () (Mounting hole for manifold) 3-Rc 1/8, 1/4 -ø4. 158.5 (3 position: 179) 6 (3 position: 73) (R1, R port) 3-4-0

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 Base Mounted (With sub-plate): Position Single Solenoid Grommet: 3140- G- 0 03 Grommet terminal: 3140- E- 0 03 PE port (Pilot EXH) 5-Rc 1/4, 3/8 ø.3 to ø.8 PE port 5-Rc 1/4, 3/8 Conduit terminal: 3140- T- 0 03 DIN terminal: 3140- D- 3140- Y- 0 03 0 03 R S S D: PE port (Pilot EXH) 5-Rc 1/4, 3/8 PE port (Pilot EXH) 5-Rc 1/4, 3/8 3-4-1

Series 3000 Base Mounted (With sub-plate): Position Single Solenoid L plug connector: 3140- L - 0 03 Light window () Light window () PE port 5-Rc 1/4, 3/8 M plug connector: 3140- M - 0 03 Light window () Light/Surge voltage suppressor PE port 5-Rc 1/4, 3/8 3-4-

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 Base Mounted (With sub-plate): Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: 3 40- G- 0 03 Grommet terminal: 3 40- E- 0 03 Manual override PE port (Pilot EXH) 5-Rc 1/4, 3/8 83 (3 position: 103.5) 135 (3 position: 155.5) 158.5 (3 position: 179) PE port (Pilot EXH) 5-Rc 1/4, 3/8 83 (3 position: 103.5) 160 (3 position: 180.5) Conduit terminal: 3 40- T- 0 03 DIN terminal: 3 40- D- 3 40- Y- 0 03 0 03 Y: 180 (3 position: 00) D: 181 (3 position: 01) 83 (3 position: 103.5) ø.3 to ø.8 R S S 83 (3 position: 103.5) 181 (3 position: 01.5) D: PE port (Pilot EXH) 5-Rc 1/4, 3/8 PE port (Pilot EXH) 5-Rc 1/4, 3/8 3-4-3

Series 3000 Base Mounted (With sub-plate): Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center L plug connector: 3 40- L - 0 03 Light window () 150 (3 position: 170.5) 160.5 (3 position: 181) PE port 5-Rc 1/4, 3/8 M plug connector: 3 40- M - 0 03 Light window () 184 (3 position: 04.5) PE port 5-Rc 1/4, 3/8 3-4-4

Series 3000 Manifold Specifications VV5F3-71 VV5F3-40 VV5F3-30 Manifold Specifications Manifold type Exhaust port type Max. number of stations Note) Style B mount S mount Option B mount (Single base type) S mount Common Individual Common Individual 0 stations 10 stations Note) In the case of more than 8 stations for B mount or more than 4 stations for S mount, supply air from both sides of P (SUP) port and exhaust from both sides of R (EXH) port. Manifold base model VV5F3-30 VV5F3-40 VV5F3-50 VV5F3-60 VV5F3-61 VV5F3-70 VV5F3-71 (1) R (EXH) type Common Common Individual Common Common Individual Individual Piping/Port location Port size P (SUP) R (EXH) A, B (CYL) P (SUP) R (EXH) A, B (CYL) Side Base Side Base Side Base Side Side plate Side Side plate Side Side plate Side Side plate Side Base Side Base Top Valve Top Side plate Side Side plate Bottom Valve Side Valve Top Valve Bottom Base Bottom Base Top Valve Side Valve Top Valve Side Valve 1 8 1 8 1 8 1 8 1 8 () Applicable valve model 3 30 3 33 3 40 3 43 3 50 3 60 3 63 3160 3163 (Single solenoid only) 3 70 3170 (Single solenoid only) Note 1) Supply (P port) is common. Note ) Common exhaust type for main and pilot valve is possible only in the valves of common exhaust. Description Part no. Applicable manifold model Individual EXH spacer assembly Note) DXT155-17-1A VV5F3-30/40 Blanking plate assembly DXT031-38-1A VV5F3-30/40/50 Note) Used to exhaust air individually from certain valves mounted on common exhaust manifolds Type 30 and Type 40. R S S VV5F3-60 How to Order Manifold Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) VV5F3-40-05-0 1 pc. (Manifold base) 3140-1G pcs. (Valve) 340-1G pcs. (Valve) DXT031-38-1A 1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. B Mount (Integrated type) Top ported/common EXH type Type 30 A, B port R port VV5F3 30 05 1 Bottom ported/common EXH type Type 40 Stations 0 0 Stations 0 stations 0 0 stations stations 0 stations VV5F3 40 05 0 R port P port A, B port P port Applicable solenoid valve 01 3 30- - 0 3 33- - 01 0 Applicable blanking plate assembly DXT031-38-1A Applicable individual EXH spacer assembly DXT155-17-1A Applicable solenoid valve 3 40-3 43- Applicable blanking plate assembly DXT031-38-1A Applicable individual EXH spacer assembly DXT155-17-1A 3-4-5

Series 3000 B Mount (Integrated type) Bottom ported/individual EXH type Type 50 EXH (R) port (Valve body) VV5F3 50 05 4 0 Stations 0 stations Applicable solenoid valve 3 50- Applicable blanking plate assembly DXT031-38-1A P port A, B port 0 0 stations S Mount (Separated type) Top ported/common EXH type Type 60 CYL (A, B) port VV5F3 60 05 1 Stations 0 stations Applicable solenoid valve 3 60- - 01 0 3 63- - 01 0 10 0 stations EXH (R) port SUP (P) port Side ported/common EXH type Type 61 VV5F3 61 05 1 Stations 0 stations Applicable solenoid valve 3160- - 01 0 3163- - 01 0 CYL (A, B) port 10 0 stations SUP (P) port EXH port Top ported/individual EXH type Type 70 CYL (A, B) port VV5F3 70 05 3 Stations 0 stations Applicable solenoid valve 3 70- - 01 0 10 0 stations EXH (R) port SUP (P) port Side ported/individual EXH type Type 71 EXH (R) port VV5F3 71 05 3 Stations 0 stations Applicable solenoid valve 3170- - 01 0 10 0 stations SUP (P) port CYL (A, B) port 3-4-6

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 B Mount: VV5F3-30 Common EXH: VV5F3-30 1 Double Single (Pitch) n-rc 1/8, 1/4 (A, B port) 158.5 (3 position: 179) 79 (3 position: 89.5) 75 (3 position: 78) 41.5 (3 position: 5) (Mountinghole) A, B port dimensions Mounting hole dimension (G) PE port (Pilot EXH) 6-Rc 1/4 (P, R port) R S (E) (T) (D, Y) S 160 (3 position: 180.5) (3 position: 90.5) 181 (3 position: 01) (3 position: 100.5) Y: 180 (3 position: 00) D: 181 (3 position: 01) Y: 90 (3 position: 100) D: 90.5 (3 position: 100.5) ø.3 to ø.8 (L) (M) D: 160.5 (3 position: 181) 80 (3 position: 90.5) 184 (3 position: 04.5) (3 position: 10) L Dimension L L1 L n 83.5 71.5 3 111 99 4 138.5 16.5 5 166 154 6 193.5 181.5 7 1 09 8 48.5 36.5 9 76 64 10 303.5 91.5 11 331 319 1 358.5 346.5 13 386 374 14 413.5 401.5 15 441 49 16 468.5 456.5 17 496 484 18 53.5 511.5 n: Stations 19 551 539 0 578.5 566.5 3-4-7

Series 3000 B Mount: VV5F3-30, VV5F3-40 Common EXH: VV5F3-40 -0 Double Single 158.5 (3 position: 179) 79 (3 position: 89.5) 67.5 (3 position: 78) 41.5 (3 position: 5) (Pitch) (G) (P, R port) PE port (Pilot EXH) (E) (T) (D, Y) Bottom ported 160 (3 position: 180.5) (3 position: 90.5) 181 (3 position: 01) (3 position: 100.5) Y: 180 (3 position: 00) D: 181 (3 position: 01) Y: 90 (3 position: 100) D: 90.5 (3 position: 100.5) ø.3 to ø.8 (L) (M) D: (A, B port) 160.5 (3 position: 181) (3 position: 90.5) 184 (3 position: 04.5) (3 position: 10) Pitch L Dimension L L1 L n 83.5 71.5 3 111 99 4 138.5 16.5 5 166 154 6 193.5 181.5 7 1 09 8 48.5 36.5 9 76 64 10 303.5 91.5 11 331 319 1 358.5 346.5 13 386 374 14 413.5 401.5 15 441 49 16 468.5 456.5 17 496 484 18 53.5 511.5 n: Stations 19 551 539 0 578.5 566.5 3-4-8

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 B Mount: VV5F3-50, Spacer for Individual Exhaust Individual EXH: VV5F3-50- 4-0 (G) 158.5 (3 position: 179) 79 (3 position: 89.5) 67.5 (3 position: 78) 41.5 (3 position: 5) Double Bottom ported Single (Pitch) (EXH port) Mounting hole dimension EXH port dimension n-rc 1/4 (A, B port) L Dimension Spacer for individual EXH/Applicable model: VV5F3-30, VV5F3-40 L n-rc 1/4 (P port) (Through-hole) L1 L n 83.5 71.5 3 111 99 P, E port (Pilot EXH) 4 138.5 16.5 160.5 (3 position: 181) 80 (3 position: 90.5) 5 166 154 160 (3 position: 180.5) (3 position: 90.5) 6 193.5 181.5 (E) ø.3 to ø.8 7 1 09 8 48.5 36.5 9 76 64 10 303.5 91.5 181 (3 position: 01) (3 position: 100.5) 184 (3 position: 04.5) 9 (3 position: 10) 11 331 319 (T) (D, Y) 1 358.5 346.5 13 386 374 14 413.5 401.5 15 441 49 Y: 180 (3 position: 00) D: 181 (3 position: 01) 16 468.5 456.5 Y: 90 (3 position: 100) D: 90.5 (3 position: 100.5) 17 496 484 D: 18 53.5 511.5 n: Stations 19 551 539 0 578.5 566.5 R S S Double Single (Pitch) 158.5 (3 position: 179) 79 (3 position: 89.5) 67.5 (3 position: 78) 41.5 (3 position: 5) (EXH port) 6-Rc 1/4 (P, R port) PE port (Pilot EXH) Individual EXH spacer L Dimension L L1 L n 83.5 71.5 3 111 99 4 138.5 16.5 5 166 154 6 193.5 181.5 7 1 09 8 48.5 36.5 9 76 64 10 303.5 91.5 11 331 319 1 358.5 346.5 13 386 374 14 413.5 401.5 15 441 49 16 468.5 456.5 17 496 484 18 53.5 511.5 n: Stations 19 551 539 0 578.5 566.5 3-4-9

Series 3000 S Mount: VV5F3-60, VV5F3-61 Common EXH: VV5F3-60- 1 (G) (E) (T) (D, Y) 158.5 (3 position: 179) 79 (3 position: 89.5) 67.5 (3 position: 78) 41.5 (3 position: 5) Double n-rc 1/4, 1/8 (CYL port) 4-Rc 1/4 (EXH port) 4-M5 -Rc 1/4 (SUP port) 160 (3 position: 180.5) (3 position: 90.5) ø.3 to ø.8 (L) 181 (3 position: 01) (3 position: 100.5) (M) Y: 180 (3 position: 00) D: 181 (3 position: 01) Y: 90 (3 position: 100) D: 90.5 (3 position: 100.5) D: (Bracket mounting screw) (Pilot EXH) 160.5 (3 position: 181) 80 (3 position: 90.5) 184 (3 position: 04.5) 9 (3 position: 10) Common EXH: VV5F3-61- 1 4-Rc 1/4 (EXH port) Single (G) L Dimension L L1 L L3 -Rc 1/4 (SUP port) n 17.5 115.5 99 (E) 3 154 14 15 ø.3 to ø.8 4 180 168 151.5 5 06.5 194.5 178 6 33 1 04.5 7 59.5 47.5 31 8 86 74 57 9 31 300 83.5 n: Stations 10 338.5 36.5 310 (T) (D, Y) D: n-rc 1/8, 1/4 (CYL port) (Pitch) 4-M5 (L) (M) (Bracket mounting screw) (Pilot EXH) L Dimension L L1 L L3 n 17.5 115.5 99 3 154 14 15 4 180 168 151.5 5 06.5 194.5 178 6 33 1 04.5 7 59.5 47.5 31 8 86 74 57 9 31 300 83.5 n: Stations 10 338.5 36.5 310 3-4-30

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 3000 S Mount: VV5F3-70, VV5F3-71 Individual EXH: VV5F3-70- 3 (G) (E) (T) (D, Y) 158.5 (3 position: 179) 79 (3 position: 89.5) Double (3 position type) Single n-rc 1/8, 1/4 (CYL port) 67.5 (3 position: 78) 41.5 (3 position: 5) (Bracket mounting screw) Individual EXH: VV5F3-71- 3 n-rc 1/8, 1/4 (CYL port) (Pitch) 4-M5 (Pilot EXH) n-rc 1/4 (EXH port) 160.5 (3 position: 181) (3 position: 90.5) (SUP port) (L) (G) (Lead wire length) 160 (3 position: 180.5) (3 position: 90.5) -Rc 1/4 (SUP port) L Dimension L L1 L L3 n ø.3 to ø.8 184 (3 position: 04.5) (3 position: 10) 17.5 115.5 99 (E) 3 154 14 15 ø.3 to ø.8 (M) 4 180 168 151.5 181 (3 position: 01) (3 position: 100.5) 5 06.5 194.5 178 -Rc 1/4 (SUP port) 6 33 1 04.5 Y: 180 (3 position: 00) D: 181 (3 position: 01) 7 59.5 47.5 31 Y: 90 (3 position: 100) D: 90.5 (3 position: 100.5) 8 86 74 57 D: 9 31 300 83.5 n: Stations (T) (D, Y) D: 10 338.5 36.5 310 R S S -Rc 1/4 (SUP port) (Pitch) 4-M5 (L) (Lead wire length) (M) n-rc 1/4 (EXH port) (Pilot EXH) (Bracket mounting screw) L Dimension L L1 L L3 n 17.5 115.5 99 3 154 14 15 4 180 168 151.5 5 06.5 194.5 178 6 33 1 04.5 7 59.5 47.5 31 8 86 74 57 9 31 300 83.5 n: Stations 10 338.5 36.5 310 3-4-31

For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series 5000 Compact and lightweight: 3 mm width Compact yet provides a large flow capacity: Sonic conductance C: 1 dm3/(s bar) {4/ 5/3(A/B EA/EB)} Low power consumption: 1.8 W (DC) 50 (Grommet) 50 (DIN terminal) 550 (Grommet) 510 (Conduit terminal) Body ported 5544 (DIN terminal) 544 (Grommet) 510 (Grommet terminal) 510 (Grommet) 5544 (Grommet terminal) 5144 (Grommet) Base mounted (With sub-plate) JIS Symbol Single 510 Closed center 530 Pressure center 550 Double 50 Exhaust center 540 Specifications Fluid Operating pressure range position single/3 position position double Air 0.15 to 0.9 MPa 0.1 to 0.9 MPa Ambient and fluid temperature 10 to 50 C (No freezing. Refer to page 3-13-4.) (1) position single/double 30 ms or less (at the pressure of 0.5 MPa) Response time 3 position 50 ms or less (at the pressure of 0.5 MPa) Max. operating frequency Lubrication position single/double 3 position 5 Hz 3 Hz Not required Non-locking push type, Locking type B, Locking type C Mounting orientation Shock/Vibration resistance () Enclosure Unrestricted 300/50 m/s Dustproof Note 1) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature: 0 C, at rated voltage, without surge suppressor) Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Electrical entry AC50/60 Hz Coil rated voltage (V) DC Allowable voltage fluctuation Note) Inrush Apparent power AC Holding Power consumption Note) DC AC Light/Surge voltage suppressor DC Option Note) At rated voltage Flow Characteristics/Weight Valve model Type of actuation position single position double 5 0- -0 3 position closed center 3 position exhaust center 3 position pressure center position single position double 5 0- -03 3 position closed center 3 position exhaust center 3 position pressure center position single position double 5 44- -0 3 position closed center 3 position exhaust center 3 position pressure center position single position double 5 44- -03 3 position closed center 3 position exhaust center 3 position pressure center position single position double 5 44- -04 3 position closed center 3 position exhaust center 3 position pressure center Note 1) With sub-plate Note ) Weight stands for grommet type. Body ported (1) Base mounted Port size 3 8 3 8 1 Grommet, Grommet terminal Conduit terminal, DIN terminal 100, 00, 1, 4, 48, 110, 0, 40 4, 6, 1, 48, 100, 110 15 to +10% of rated voltage 5.6 VA (50 Hz), 5.0 VA (60 Hz) 3.4 VA (50 Hz),.3 VA (60 Hz) 1.8 W, W (With indicator light) ZNR (Varistor), Neon bulb (LED100 V or less) ZNR (Varistor), LED (Neon bulb100 V or more) Flow characteristics 1 4/ (P A/B) 4/ 5/3 (A/B EA/EB) C C b Cv [dm 3 /(s bar)] [dm 3 /(s bar)] b Cv 7.1 0.46 1.9 7.7 0.51. 7.1 0.46 1.9 7.7 0.51. 6.7 0.46 1.8 6.6 10.41 1.8 7.1 0.4 1.9 8.0 [7.4] 0.45 [0.47]. [.1] 6.8 [.7] 0.51 [0.50].0 [0.78] 5.7 0.37 1.4 8.8 0.44.4 10 0.49.9 8.8 0.44.4 10 0.49.9 7.5 0.43.0 7.5 0.38 1.9 8.3 0.40. 10 [8.7] 0.48 [0.46] 3.0 [.4] 9. [3.0] 0.50 [0.49].6 [0.85] 6.1 0.35 1.6 7.3 0.49.1 7.3 0.50.0 7.3 0.49.1 7.3 0.50.0 6.6 0.35 1.7 6.3 0.31 1.6 7.4 0.33 1.9 8.1 [7.4] 0.35 [0.34].1 [1.9] 8.0 [.9] 0.35 [0.48].1 [0.85] 5.6 0.31 1.5 8.4 0.34. 8.9 0.9.3 8.4 0.34. 8.9 0.9.3 7.3 0.34.0 7.1 0.8 1.8 8.1 0.7.0 14 [8.3] 0.6 [0.31] 3.4 [.] 8.1 [.5] 0.33 [0.48].0 [0.74] 5.7 0.31 1.4 9.4 0.43.7 1 0.3 3.0 9.4 0.43.7 1 0.3 3.0 7.1 0.41.1 7.4 0.3.0 8.6 0.39.4 13 [8.9] 0.1 [0.40] 3.1 [.5] 11 [.6] 0.18 [0.47].6 [0.78] 6.1 0.35 1.6 Note 3) [ ]: Normal position () Weight (kg) 0.38 0.45 0.56 0.56 0.56 0.38 0.45 0.56 0.56 0.56 0.57 0.65 0.74 0.74 0.74 0.57 0.65 0.74 0.74 0.74 0.6 0.69 0.79 0.79 0.79 3-4-33 R S S

Series 5000 How to Order Port size 0 03 Body ported 5 1 0 1 G 03 3 8 Thread type Nil Rc F G N NPT T NPTF Base mounted 5 4 1 G 03 Type of actuation 1 3 4 5 Single solenoid Double solenoid Closed center Exhaust center Pressure center Non-locking Nil push type B Locking type B C Locking type C Port size Nil Without sub-plate 0 03 3 8 04 1 Coil rated voltage 1 3 4 5 6 7 9 Option 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 110 to 10 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC 1 VDC 40 VAC, 50/60 Hz Other Light/Surge voltage suppressor Nil Z S Electrical entry G H E T D DO With surge voltage suppressor Indicator light is not available for grommet type. W/surge voltage suppressor is available for grommet type only. Grommet (Lead wire length: 300 mm) Grommet (Lead wire length: 600 mm) Grommet terminal Conduit terminal With connector DIN terminal Without connector How to Order Pilot Valve Assembly SF4 1 DZ 50 (A) (B) (C) (A) Coil rated voltage 1 100 VAC, 50/60 Hz 00 VAC, 50/60 Hz 3 110 to 10 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 1 VDC 7 40 VAC, 50/60 Hz 9 Other Option (B) Electrical entry, Light/Surge voltage suppressor Symbol G Electrical entry Lead wire length Light/Surge voltage suppressor GS 300 mm With surge voltage suppressor Grommet H Lead wire length HS 600 mm With surge voltage suppressor E Grommet terminal EZ T Conduit terminal TZ D DZ DO DOZ DIN terminal With connector Without connector (C) Nil Non-locking push type B Locking type B C Locking type C Interchangeable with the previous model, DXT154-A-. 3-4-34

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 5000 Construction Single solenoid e u q yw r o t (B) (A) 4 3 (R) 1 (P) 5 (R1) P.E. Double solenoid u q w y r o t R (B) (A) 4 S S P.E. 3 (R) 1 (P) 5 (R1) P.E. i 3 position closed center Component Parts No. q w e r t y u Description Body Adapter plate End cover Pilot body Pilot cover Piston Spool valve Material Aluminum die-casted Resin (1) Resin (1) Resin Resin Resin () Aluminum, HNBR Note Platinum silver Black (3) Black Note 1) 3 position: Aluminum die-casted Note ) 3 position: Aluminum Note 3) 3 position: Metallic paint Replacement Parts No. i o Description Sub-plate Pilot valve assembly Part no. Note DXT156-4-1 P Aluminum DXT156-4- P 3 8 die-casted DXT156-4-3 P 1 Refer to How to Order SF4- -50 on page 3-4-34. Sub-plate Part No. DXT156 4 1 3 P Thread type Nil Rc F G N NPT T NPTF 3-4-35

Series 5000 Body Ported: Position Single Solenoid Grommet: 510- G- 0 03 Grommet terminal: 510- E- 0 03 (Mounting hole for manifold) (Mounting hole for manifold) M5 x 0.8 5-Rc 1/4, 3/8 Conduit terminal: 510- T- 0 03 DIN terminal: 510- D- 510- Y- 0 03 0 03 (Mounting hole for manifold) (Mounting hole for manifold) D: 3-4-36

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 5000 Body Ported: Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: 5 0- G- 0 03 Grommet terminal: 5 0- E- 0 03 17.5 (3 position: 01.5) 10.5 (3 position: 149.5) 10.5 (3 position: 149.5) (Mounting hole for manifold) 110.5 (3 position: 139.5) 196 (3 position: 5) 5-Rc 1/4, 3/8 (Mounting hole for manifold) 110.5 (3 position: 139.5) Conduit terminal: 5 0- T- 0 03 DIN terminal: 5 0- D- 5 0- Y- 197.5 (3 position: 6.5) 0 03 0 03 ø.3 to ø.8 R S S Y: 17.5 (3 position: 46.5) D: 18.5 (3 position: 47.5) 18.5 (3 position: 47.5) 10.5 (3 position: 149.5) 10.5 (3 position: 149.5) (Mounting hole for manifold) (Mounting hole for manifold) 110.5 (3 position: 139.5) 110.5 (3 position: 139.5) D: 196 (3 position: 5) 196 (3 position: 5) 3-4-37

Series 5000 Base Mounted: Position Single Solenoid Grommet: 5144- G- 0 03 04 Grommet terminal: 5144- E- 0 03 04 5-Rc 1/4, 3/8, 1/ 5-Rc 1/4, 3/8, 1/ ( ): 5144- G-04 Conduit terminal: 5144- T- 0 03 04 DIN terminal: 5144- D- 5144- Y- ( ) : 5144- E-04 0 03 04 0 03 04 D: 5-Rc 1/4, 3/8, 1/ 5-Rc 1/4, 3/8, 1/ ( ) : 5144- T-04 D ( ) : 5144- Y -04 3-4-38

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 5000 Base Mounted: Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: 5 44 G- 0 03 04 Grommet terminal: 5 44 E- 0 03 04 ( ) : 5 44- G-04 < > : 3 position 5-Rc 1/4, 3/8, 1/ -ø5.3 (-ø6.5) ø.3 to ø.8 5-Rc 1/4, 3/8, 1/ ( ) : 5 44- E-04 < > : 3 position Conduit terminal: 5 44- T- 0 03 04 DIN terminal: 5 44- D- 5 44- Y- 0 03 04 0 03 04 R S S D: 5-Rc 1/4, 3/8, 1/ 5-Rc 1/4, 3/8, 1/ ( ) : 5 44- D-04 < > : 3 position D ( ) : 5 44- Y-04 < > : 3 position 3-4-39

Series 5000 Manifold Specifications Manifold Specifications Manifold type Exhaust port type Max. number of stations B mount (Single base type) Common EXH 10 (15 for 1 type w/side block) For more than 5 stations for type 0 and 40 or more than 8 station for type 1, supply air from both sides of supply (P) port and exhaust air from both sides of exhaust (R) port. VV5F5-1 Manifold base model VV5F5-0 VV5F5-1 VV5F5-40 R (EXH) (1) port type Common Common Common Piping/Port location Port size Rc P R A, B P R A, B Side Side Top 1 3 8 3 4 8 Base Base Valve 3 8 Side Side Top 1 1 Side block Side block Valve 3 8 Side Side Bottom 3 8 3 8 Base Base Base Its flow characteristics is 80% of that with sub-plate. Note 1) P (SUP) port is all common. Note ) Model number for valve unit is that for application manifold. Applicable () valves model 5 0 5 44 VV5F5-0 Option Description Part no. Applicable manifold model Note) DXT156-0-1A VV5F5-0/1 Individual EXH spacer assembly DXT156-0-3A VV5F5-40 DXT156-19-1A VV5F5-0/1 Blanking plate assembly DXT156-19-A VV5F5-40 Note) Spacer is used when it is necessary to exhaust from certain valves individually. How to Order Manifold Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) VV5F5-0-051 1 pc. (Manifold base) 510-1G-03 pcs. (Valve) 50-1G-03 pcs. (Valve) DXT156-19-1A 1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. 3-4-40

5 Port Pilot Operated Solenoid Valve Rubber Seal Series 5000 B Mount (Integrated type) Top ported/common EXH type Type 0 A, B port VV5F5 0 05 1 Stations 0 stations 10 10 stations Applicable solenoid valve 5 0- - 0 03 Applicable individual EXH spacer assembly DXT156-0-1A Applicable blanking plate assembly DXT156-19-1A R port P port Top ported/common EXH type Type 1 A, B port VV5F5 1 05 1 Stations 0 stations 15 15 stations Applicable solenoid valve 5 0- - 0 03 Applicable individual EXH spacer assembly DXT156-0-1A Applicable blanking plate assembly DXT156-19-1A R S S R port P port Bottom ported/common EXH type Type 40 P port VV5F5 40 05 0 Stations 0 stations Applicable solenoid valve 5 44- Applicable individual EXH spacer assembly DXT156-0-3A Applicable blanking plate assembly DXT156-19-A 10 10 stations R port A, B port 3-4-41