Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive dust. -series internal mechanism assures high precision and durability. The mounting is the same as of the models. Ideal for automobiles, agricultural machines, large-scale home appliances, and industrial equipment, which require high environmental resistance. RoHS Compliant Model Number Legend -@ 1 @@@@ 3 4 1. Ratings : 0 C 01 : 30 C 0.1. ctuator None : Pin plunger L1 : Short hinge lever L1 : Hinge lever L1B : Long hinge lever L : Short hinge roller lever L : Hinge roller lever L3 : Simulated roller hinge lever 4. Terminals None, HS : M, MS : Molded lead wires Note: UL/CS approved versions are available. In this case, HS, MS will be added to the end of the model numbe UL/CS approved models have UL approved wiring (G0 UL101). Consult your OMRON sales representative for details.. Length of the molded lead wire None : 300 mm -0 : 1,000 mm 3. Contact form -1 : SPT - : SPST-NC -3 : SPST-NO 1
List of Models Ratings ctuator Terminals Contact form Pin plunger Short hinge lever Hinge lever Long hinge lever Short hinge roller lever Hinge roller lever Simulated roller hinge lever 0.1 SPT --1-01-1 SPST-NC -- -01- SPST-NO --3-01-3 SPT --1M -01-1M SPST-NC --M -01-M SPST-NO --3M -01-3M Molded lead wires (1,000 mm) SPT --1M-0-01-1M-0 SPT -L1-1 -01L1-1 SPST-NC -L1- -01L1- SPST-NO -L1-3 -01L1-3 SPT -L1-1M -01L1-1M SPST-NC -L1-M -01L1-M SPST-NO -L1-3M -01L1-3M Molded lead wires (1,000 mm) SPT -L1-1M-0-01L1-1M-0 SPT -L1-1 -01L1-1 SPST-NC -L1- -01L1- SPST-NO -L1-3 -01L1-3 SPT -L1-1M -01L1-1M SPST-NC -L1-M -01L1-M SPST-NO -L1-3M -01L1-3M Molded lead wires (1,000 mm) SPT -L1-1M-0-01L1-1M-0 SPT -L1B-1-01L1B-1 SPST-NC -L1B- -01L1B- SPST-NO -L1B-3-01L1B-3 SPT -L1B-1M -01L1B-1M SPST-NC -L1B-M -01L1B-M SPST-NO -L1B-3M -01L1B-3M Molded lead wires (1,000 mm) SPT -L1B-1M-0-01L1B-1M-0 SPT -L-1-01L-1 SPST-NC -L- -01L- SPST-NO -L-3-01L-3 SPT -L-1M -01L-1M SPST-NC -L-M -01L-M SPST-NO -L-3M -01L-3M Molded lead wires (1,000 mm) SPT -L-1M-0-01L-1M-0 SPT -L-1-01L-1 SPST-NC -L- -01L- SPST-NO -L-3-01L-3 SPT -L-1M -01L-1M SPST-NC -L-M -01L-M SPST-NO -L-3M -01L-3M Molded lead wires (1,000 mm) SPT -L-1M-0-01L-1M-0 SPT -L3-1 -01L3-1 SPST-NC -L3- -01L3- SPST-NO -L3-3 -01L3-3 SPT -L3-1M -01L3-1M SPST-NC -L3-M -01L3-M SPST-NO -L3-3M -01L3-3M Molded lead wires (1,000 mm) SPT -L3-1M-0-01L3-1M-0 Separator (Sold Separately), ctuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common ccessories"
Safety Standard pproved Models Ratings ctuator Terminals Contact form 0.1 Pin plunger --1HS -01-1HS --1MS -01-1MS Short hinge lever -L1-1HS -01L1-1HS -L1-1MS -01L1-1MS Hinge lever -L1-1HS -01L1-1HS -L1-1MS -01L1-1MS Long hinge lever -L1B-1HS -01L1B-1HS SPT -L1B-1MS -01L1B-1MS Short hinge roller lever -L-1HS -01L-1HS -L-1MS -01L-1MS Hinge roller lever -L-1HS -01L-1HS -L-1MS -01L-1MS Simulated roller lever -L3-1HS -01L3-1HS -L3-1MS -01L3-1MS Contact Form SPT SPST-NC SPST-NO Contact Specifications * Please refer to "Using Micro Loads" in " Precautions" for more information on the minimum applicable load. Ratings NC (Red) NO (Blue) COM (Black) Item Model - models -01 models Contact Inrush current Specification Rivet Crossbar Material Silver alloy Gold alloy Gap (standard value) 0. mm NC 1 max. - NO 1 max. - Minimum applicable load (reference value) * Model - models -01 models C 160 m C 1 m Item Resistive load Rated voltage 0 C 1 C 30 C 1 C 0.1 30 C 0.1 Note. The above rating values apply under the following test conditions. (1) mbient temperature: 0± C () mbient humidity: 6±% (3) Operating frequency: 30 operations/min NC (Red) COM (Black) pproved Safety Standards UL (UL104)/CS (CS C. No.) The terminal specification for models with UL/CS safety standard certification is HS or MS. E (EN6108-1) The models in the List of Models on the previous page are not certified for E standards. Contact your OMRON representative if you require certified models. Testing conditions: - E3 (,000 operations) NO (Blue) COM (Black) The color in parentheses indicates the color of the lead wire. Rated voltage Model - -01 1 C 0 C 3 3 0.1-30 C - 0.1 Rated voltage Model - -01 1 C 0 C - 3 0.1 - T (0 to C) -01 1E (100,000 operations) T8 (0 to 8 C) Separator (Sold Separately), ctuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Micro Switch Common ccessories" 3
Characteristics Item Model - models -01 models Permissible operating speed 0.1mm to 1m/s (for pin plunger models) Permissible Mechanical 300 operations/min operating frequency Electrical 60 operations/min Insulation resistance 100 MΩ min. (00 C with insulation tester) Terminal models 0 mω max. Contact resistance (initial value) ielectric strength *1 Molded lead wire terminals (300mm) Molded lead wire terminals (1,000mm) Between terminals of the same polarity Between current-carrying metal parts and ground Between terminals and non-current-carrying metal parts ibration resistance * Malfunction Shock estruction resistance Malfunction * Mechanical urability *3 Electrical 100 mω max. 00 mω max. 1,000 C 0/60 Hz for 1 min 1,00 C 0/60 Hz for 1 min 1,00 C 0/60 Hz for 1 min 10 to Hz, 1. mm double amplitude 1,000m/s {approx. 100G} max. 300m/s {approx. 30G} max. 10,000,000 operations min. (60 operations/min) 100,000 operations min. (30 operations/min) 1,000,000 operations min. (30 operations/min) egree of Terminal models IEC IP67 (excluding the terminals on terminal models) protection Molded lead wire models IEC IP67 egree of protection against electric shock Class l Proof tracking index (I) 17 mbient operating temperature 40 C to +8 C (at ambient humidity of 60% max.) (with no icing or condensation) mbient operating humidity 9% max. (for + C to +3 C) eight pprox. 7 g (for pin plunger models with terminals) Note. The data given above are initial values. *1. The dielectric strength shown in the table indicates the value for models with a Separator (refer to "Basic Switch Common ccessories"). *. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. Mounting Holes (Unit: mm) -3.1 dia. mounting holes or M3 screw holes.±0.1 ±0.1 imensions (Unit: mm) and Operating Characteristics Models with solder terminals The illustrations and dimensions are for pin plunger models. imensions and operation characteristics of other actuator models are the same as those of molded lead wires models. Pin Plunger Models --1.4 dia. holes 1.3 dia. holes -01-1 4.7 Operating Force OF Max. 1.96 N {00 gf} Releasing Force RF Min. 0.9 N {30 gf} 1. Max. 1. mm. OT Min. 1.0 mm 8.4 Movement ifferential M Max. 0.4 mm 0.±0. Operating Position 14.7±0.4 mm. dia. 3.1 +0.13-0.03 dia. holes.8 0.. 1.9 ±0.1.. 3.1 +0.13-0.03.8 3.±0.1 dia..±0.1 33 t0. 3- Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note. The operating characteristics are for operation in the direction ( ). 4
Models with molded lead wires The illustration and drawing shown is the SPT model. SPST-NC model and SPST-NO model are omitted. Pin Plunger Models --1M --1M-0-01-1M -01-1M-0.8 1.9 ±0.1 3.1 +0.13-0.03.8 0.±0.. dia. 3.±0.1 dia..±0.1 3.1 +0.13 0.03 dia. holes 33 L imensions 0.7f molded lead wire (red)* 0.7f molded lead wire (blue)* 0.7f molded lead wire (black)* 300 mm type () 1,000 mm type L 300±10 1,000±30 Operating Force OF Max. 1.96 N {00 gf} Releasing Force RF Min. 0.9 N {30 gf} Max. 1. mm OT Min. 1.0 mm Movement ifferential M Max. 0.4 mm Operating Position 14.7±0.4 mm * UL/CS approved models have UL approved wiring (G0 UL101). Short Hinge Lever Models -L1-1M -L1-1M-0-01L1-1M -01L1-1M-0 1.9 4.3±0.8 t=0.* 4.3 Operating Force OF Max. Releasing Force RF Min. Max. OT Min. Movement ifferential M Max. 1.96 N {00 gf} 0.0 N {0 gf} 1.6 mm 0.8 mm 0. mm Operating Position 1.±0. mm * Stainless-steel lever Hinge Lever Models -L1-1M -L1-1M-0-01L1-1M -01L1-1M-0 3.6±0.8 4.3 Operating Force OF Max. 1.18 N {10 gf} t=0.* Releasing Force RF Min. 0.1 N {1 gf} Max. 4.0 mm OT Min. 1.6 mm 1.9 Movement ifferential M Max. 0.8 mm Operating Position 1.±1. mm * Stainless-steel lever Long Hinge Lever Models -L1B-1M -L1B-1M-0-01L1B-1M -01L1B-1M-0 1.9 9.4±0.8 t=0.* 4.3 Operating Force OF Max. 0.9 N {60 gf} Releasing Force RF Min. 0.0 N { gf} Max. 9.0 mm OT Min. 3. mm Movement ifferential M Max..0 mm Operating Position 1.±.6 mm * Stainless-steel lever Simulated Roller Lever Hinge Models -L3-1M -L3-1M-0-01L3-1M -01L3-1M-0 1.9 3.6±0.8 Operating Force OF Max. 1.18N {10 gf} R3. t=0.* 4.3 Releasing Force RF Min. 0.1N {1 gf} Max. 4.0 mm OT Min. 1.6 mm Movement ifferential M Max. 0.8 mm Operating Position 18.7±1. mm * Stainless-steel lever Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note. The operating characteristics are for operation in the direction ( ).
Models with molded lead wires Short Hinge Roller Lever Models -L-1M -L-1M-0-01L-1M -01L-1M-0 * 4.8 4.8 dia. 1.9 4.3±0.8 0.1±0.8 *1 t=0. *1. Stainless-steel lever *. Polyacetal resin roller 7. Operating Force OF Max. Releasing Force RF Min. Max. OT Min. Movement ifferential M Max.. N {30 gf} 0.0 N {0 gf} 1.6 mm 0.8 mm 0. mm Operating Position 0.7±0.6 mm Hinge roller lever -L-1M -L-1M-0-01L-1M -01L-1M-0 1.9 34±0.8 4.8 4.8 * dia. t=0. *1 7. Operating Force OF Max. Releasing Force RF Min. Max. OT Min. Movement ifferential M Max. 1.18 N {10 gf} 0.1 N {1 gf} 4.0 mm 1.6 mm 0.8 mm Operating Position 0.7±1. mm *1. Stainless-steel lever *. Polyacetal resin roller Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note. The operating characteristics are for operation in the direction ( ). 6
Precautions Please refer to "Basic Switches Common Precautions" for correct use. Cautions egree of Protection o not use the Switch underwater. The Switch was tested and found to meet the conditions necessary to meet the following standard, however, the test checks for water intrusion after immersion for a specified time period, not for switching operation underwater. JIS C090: egrees of protection provided by enclosures of electrical apparatus (IP Code) IEC 609: egrees of protection provided by enclosures (IP Code) egree of protection: IP67 (check water intrusion after immersion for 30 min submerged 1 m underwater) Protection gainst Chemicals Prevent the Switch from coming into contact with oil or chemicals. Otherwise, damage to or deterioration of Switch materials may result. Soldering Connecting to Solder Terminals hen soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. Complete the soldering at the iron tip temperature between 30 to 400 C within seconds, and do not apply any external force for 1 minute after soldering. Soldering at a excessively high temperature or soldering for more than s may deteriorate the characteristics of the Switch. Correct Use Mounting Use M3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.39 to 0.9 N m {4 to 6 kgf cm}. Operating Body ith the pin plunger models, set the Switch so that the plunger can be pushed in from directly above. Since the plunger is covered with a rubber cap, applying a force from lateral directions may cause damage to the plunger or reduction in the sealing capability. Handling Handle the Switch carefully so as not to break the sealing rubber. Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The N-level reference value applies for the minimum applicable load. This value indicates the malfunction reference level for the reliability level of 60% (λ60). (JIS C003) The equation, λ60=0. 10-6 /operations indicates that the 1 estimated malfunction rate is less than,000,000 operations with a reliability level of 60%. oltage () 0.16 m 30 6 m 100 m 4 1 Operating range for micro load models -01 Operating range for general-load models - 1 m 100m 160 m 0 0.1 1 10 100 1,000 Current (m) 7
pplication examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: o not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. C09-E1-07 0417(007)(O) 8