BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance with EN -. vailable as standard FP or as higher specification FP(K). Tet var Type tested and monitored pplications FP submersible pumps have been designed for the economic and reliable pumping of clear or wastewater, gaseous liquids, and for sewage and sludge, in fied or portable applications. * For fied, wet well applications the FP is pedestal mounted. Using a self-sealing coupling system the pump seals automatically on the pedestal when lowered by guide rail into position. * Dry well applications have the option of horizontal or vertical installation. * With vorte hydraulics the FP is particularly suitable for sewage, abrasive matter, and fluids containing stringy materials that tend to rope. * The Contrablock hydraulic system offers higher efficiency and is suitable for larger proportions of solid or fibrous matter. Construction The water-pressure-tight, encapsulated, fully flood-proof motor and the pump section form a compact, robust, modular construction. Maimum allowable temperature of the medium for continuous operation is C (information on applications at other temperatures available on request). vailable in eplosion-proof versions in accordance with international standards EEd II BT, FM and TEX. Cooling FP: Free-circulation cooling by the medium. FP(K): Closed loop cooling system with circulation of glycol and water which has no contact with the sewage being pumped. This optimises heat echange and avoids the danger of blockage of the cooling system with sewage particles. Dry installation is possible without cooling system, for intermittent use only and subject to strict limitations. Bearings The stainless steel motor shaft is supported in lubricated-for-life ball bearings. Shaft sealing Between the motor and hydraulic section is by means of a high quality, silicon carbide, double mechanical seal. Standard FP has a single mechanical seal and upper lip seal. FP(K) has the option of double mechanical seals or a seal cartridge. The seal cartridge combines both mechanical seals into a complete, easy-to-replace unit (not available with ME motor). ll seals are independent of rotation direction and resistant to temperature shock. Discharge DN,, and DIN flange. Temperature monitoring TCS (Thermo-Control-System) with thermal sensors in the stator to switch off the pump in the case of overheating and switch on automatically after cooling down. Seal monitoring DI system consisting of a sensor in the motor and oil chambers which signals an inspection alert if there is leakage at the shaft seals (not in oil chamber on E version). Hydraulics FP -, -, : vorte, open, recessed, four-vane impeller. FP -, -,, & : Contrablock, open single-vane impeller. FP & : Contrablock, open double-vane impeller. Features * High-efficiency hydraulic design using Contrablock or vorte impellers. * vailable as standard FP or higher specification FP(K). * FP(K) has class H insulation and double mechanical seals as standard, with options of seal cartridge and closed loop cooling system. * utomatic seal and temperature monitoring. * vailable as eplosion-proof. * Designed for fied or transportable installation. * For lifting, FP has cast eyelet, FP(K) has stainless steel lifting hoop. Motor Three-phase, V, Hz, squirrel-cage motor as -pole ( r/min), -pole () and -pole (). Protection type IP, with stator insulation Class F ( C) for standard FP or Class H ( C) for FP(K) version. Direct starting up to kw; from kw star-delta or direct starting is possible. Motors with other operating voltages and frequencies are also available. Identification Code: e.g. FP. ME / Hydraulics: FP... Product range... Discharge outlet DN (cm)... Hydraulic number.... Impeller Motor: ME... M = modular motor; E = high efficiency... Motor power P kw... Number of poles Materials Description Motor housing Material Cast iron EN-GJL- Motor shaft Stainless steel. (ISI ) Volute Impeller Bottom plate Cast iron EN-GJL- Cast iron EN-GJL- Cast iron EN-GJL- Fasteners Stainless steel. (ISI ) FP(K) options: stainless steel motor shaft. (ISI ), stainless steel impeller. (ISI ), viton seals, and surface hardened cast iron impeller and bottomplate. FP is available in SX version as a complete stainless steel pump (see separate literature).
Technical Data FP M / M / M / S / M / M / Impeller size,,,,,,, Solid size (mm) Rated voltage (V) Motor power * (kw) P P............ Rated current ()...... Speed (r/min) Starting Cable type ** (e) Weight*** (kg) / / / /n.a. / / M /,,,... / M / M / M / M / M / S / S /,,,,,,,,................. / / / M /... / M / M / M / M / M / M / M / M / ME / ME / ME / ME / ME / ME / ME / ME / ME / ME / M / M / M / M / M / M /,,,,,,,,,,,,,,,,,,,,,,............................................................................ (e) (e) (d) (d) / / /n.a. /n.a. / / / / / / / / / / / / / / / / / / / / / / / / M /... / ME / ME / ME / ME / ME / ME / ME / ME / M / M / M / ME / ME / ME / ME / M / M / M / ME / ME / ME / ME / ME /, B B,,,, B.............................................. Electrical and cable data is for V version only; data for alternative voltages available on request........................ (d) (d) (d) / / / / / / / / / / / / / / / / / / / / / / / * P = power at mains; P = power at motor shaft ** Neoprene cable: G. G. G. (d) G +. (e) G. (G. +. for version with klion) *** without/with cooling jacket
Technical Data FP Impeller size Solid size (mm) Rated voltage (V) Motor power * (kw) P P Rated current () Speed (r/min) Starting Cable type** Weight*** (kg) M / M / M / ME / ME / ME / ME / ME / ME / ME / ME /,................................. (d) / / / / / / / / / / / Electrical and cable data is for V version only; data for alternative voltages available on request. * P = power at mains; P = power at motor shaft ** Neoprene cable: G. G. G. (d) G +. (e) G. (G. +. for version with klion) *** without/with cooling jacket Contrablock The Contrablock impeller design ensures clog-free pumping combined with high-efficiency hydraulic performance. It can handle solid sizes up to mm, including fibres and fabric which can block conventional pumping systems.. Shearing ring on the upper shroud of the impeller to protect the mechanical seal.. Open, single- or double-vane impeller with sloped deflector edge at the impeller blade.. Large suction inlet.. Bottom plate with continuous spiral groove which assists in transporting stringy material from the inlet to the discharge.. Gap between bottom plate and impeller is easily adjusted to restore efficiency in the event of wear. FP(K) cross-section. Stainless steel lifting hoop.. Motor shaft ball bearings with permanent maintenance-free lubrication.. Motor with thermal sensors in each phase.. Stainless steel motor shaft.. Closed-loop cooling system with internal recirculation impeller.. Seal-minder sensor for detection of moisture in oil and motor chambers.. Seal cartridge unit with double mechanical seals.. Contrablock (featured) or vorte impeller.
Performance Curves FP FP DN DN M/ M/ & S/* M/ M/ M/ M/ & S/* M/ M/ M/ M/ M/ [m /h] [m /h] * Use only M-motor when fitted with cooling jacket FP FP DN H DN [m] M/ M/ M/ M/ M/ M/ M/ M/ M/ M/ [m /h] [m /h] H = Total Head = Discharge Volume P = Power at motor shaft Curves to ISO N.B. Please use the BSEL program to validate pump selection.
FP DN FP DN M/ S/ & M/* S/ & M/* S/ & M/* M/ S/ & M/* [m /h] [m /h] * Use only M-motor when fitted with cooling jacket FP FP DN DN M/ M/ M/ M/ M/ M/ M/ M/ [m /h] [m /h]
Performance Curves FP DN FP DN M/ ME/ ME/ ME/ M/ M/ M/ ME/ M/ [m /h] [m /h] FP FP ME/ & / ME/ & / ME/ & / ME/ & / ME/ & / ME/ & / ME/ ME/ = ma. flow ME DN DN ME/ ME/ ME/ ME/ ME/ ME/ ME/ [m /h] [m /h] H = Total Head = Discharge Volume P = Power at motor shaft Curves to ISO N.B. Please use the BSEL program to validate pump selection.
[m /h] M/ M/ M/ M/ FP DN [m /h] M/ M/ M/ M/ FP DN FP DN FP DN ME/ ME/ ME/ M/ ME/ & ME/ ME/ B [m /h] [m /h]
Performance Curves [m /h] ME/ ME/ ME/ FP DN [m /h] M/ M/ M/ M/ FP DN FP DN FP DN M/ ME/ ME/ ME/ M/ M/ ME/ M/ M/ M/ [m /h] [m /h] H = Total Head = Discharge Volume P = Power at motor shaft Curves to ISO N.B. Please use the BSEL program to validate pump selection.
FP DN FP DN ME/ ME/ ME/ ME/ M/ M/ ME/ B M/ [m /h] [m /h] FP DN FP DN ME/ & / ME/ ME/ ME/ ME/ ME/ ME/ ME/ [m /h] [m /h]
Dimensions (mm) FP DN DN B C D E F G G G G H J K L M N M/ M/ M/ M/ M/ M/ DN DN M/ M/ M/ M/ DN = Discharge, DN = Suction. Dimensions F, O, P, S measured from cast lifting eyelet available on request (for FP-S and FP without lifting hoop). * Wet well (pedestal) Transportable * For heagon head wood screw DIN and dowel size. B E Minimum sump opening FP -,,, -: one pump = ; two pumps = Minimum sump opening FP -, -: one pump = ; two pumps = P M G N øw U T DN C D DN DN DN G F H E X K ** B E X J c d K ** FP & = mm a b + J = Lowest switch-off point for automatic control.
FP O P R S T U W X Y Z a b c d e f g h j + M/ M/ + + + M/ + + * * + * * + M/ M/ * * + * * + + M/ + + + - DN DN - - * * + M/ * * + * * + * * + + - M/ + + - M/ * * - * * - - M/ * * - * * - - - * Includes flange DIN, PN ; FP includes to DN adaptor flange. Dry well vertical Dry well horizontal Y S O S G E Z L R G = Lowest switch-off point for automatic control Volute Support (horizontal installation) j E X K e f ( ( J g h ( = Centre of discharge line, ( = Centre of head support
ccessories Fied installation - wet well with BS utomatic Coupling System Description Size Part no. FP Pedestal* (cast iron EN-GJL-) º cast bend - plug/clamp connection (with fiing bolts) º cast bend - flange connection (fiing bolts not included) flange connection without bend (with fiing bolts) DN (pipe Ø mm) DN (pipe Ø mm) DN high head (Ø mm) DN (pipe Ø mm) DN (pipe Ø mm) DN (pipe Ø mm) DN DN DN (high-head) DN DN DN DN DN - -, -,,, -, -, - - - -, -,,, - & - -, - Fied installation - dry well, (horizontal) Chain Kit (galvanized steel) including shackle Chain Kit (stainless steel) including shackle Pump Support Kit (EN-GJL-) head and volute supports with fiing bolts and vibration damper m m m m m m m m (vertical) Ground Support Stand Transportable Ground Support Stand General * -inch guide rail not included Non-return Valve (EN-GJL-) ball valve with inspection hatch ball valve with inspection hatch and venting screw Gate Valve (EN-GJL-) - - /M,,, /M,,,,,,,, /S, /S,,,,,, /M,,,,,,,,,, /S, /S, /M,,,,,,,, /M,,,, /S, /S, /M,,,,,,,,,, - - - - - - - - - & BS submersible sewage pump FP - GB -- We reserve the rights to alter specifications due to technical developments.