Drive Technology \ Drive Automation \ System Integration \ Services More Efficiency with Drive Systems from SEW-EURODRIVE Mining Industry
02 Mining Industry We drive the mining industry SEW-EURODRIVE is familiar with the requirements of mining industries. You will find our products in surface as well as underground mining. SEW-EURODRIVE has earned a reputation for reliable, robust products with a high level of availability in the marketplace. A number of our operations around Australia are equipped to service the mining industry. Our national headquarters in Melbourne stock components and assemble helical / bevel helical gear units up to 130kNm in output torque. In addition, we stock components and assemble planetary gear units up to 185kNm. We also provide servicing for these same gear units. Our operations in Sydney, Brisbane and Perth are all equipped to assemble gear units on to drive bases and to service gear units. All branches have qualified engineers to assist in all areas of technical support. Additional services and benefits include: Training Plant surveys Commissioning Energy calculations Base plate design and manufacture Alignment of equipment Fitment of free-issue items Service & overhauls
Goldfields region, Western Australia 03
04 Mining Industry We drive the mining industry Globally Machines and applications Strong reliability for all mining sites Conveyor drives Reclaimers Stackers Apron feeders Slurry pumps Screening processors/shakers Extractor fans Wet and dry cooling towers Fans Elevators Crushers Slewing drives Dredgers Bucket chain elevators Slewing drives Lifting devices Hoisting machinery Travel drives
SEW-EURODRIVE Mining Drive gear unit, incorporating energy efficient features for an increased efficiency and lower operating temparatures supplied as part of a 1100 kw conveyor package drive. 05
06 Mining Logistics Solutions Industrial Gears Power, quality and sturdy design combined in on standard product range: Industrial gear units are available as standardized units offering a high degree of customization due to their modular concept. Available as a stand-alone gear unit or integrated into a complete drive package, our industrial gear range can be operated under difficult conditions and provide movement wherever high torque demand and maximum reliability are required. Extremely high output torques are achieved with five series of industrial gear units designed to handle a wide variety of demanding applications in many industries. X-Series Robust gear housing Reduced cost and weight due to high power density and finely stepped sizes Effective cooling systems Two mounting positions with single version (invertable) Torque range 58 475 knm Flexible mounting capability Helical and helical-bevel Worldwide service Local stock holding and assembly Mining Drive Helical and bevel-helical gear units Purpose designed for increased thermal rating Reduced energy consumption Horizontal split housings Low running temperature Long oil life Safe-touch surface Maximum torque: 58 475kNm P-Series Planetary gearmotors as a standardised series A range of planetary gear units which offers the following benefits: Can transmit high torque Very compact design A high degree of torsional rigidity A large variance on the input side Variability in the gear reduction range Can be combined with the planetary gear unit in helical or helical-bevel designs Local stock holding and assembly Available up to 445 knm
03 07 EBD Extended Bearing Distance More efficiency for mixing and agitating applications Consists of add-on components (such as stronger bearings), a larger diameter output shaft and an extended bottom bearing housing Additional housing effectively increases the distance between the top and bottom bearings, adding strength and rigidity to the total unit Suitable for agitators, mixers, aerators, dry-cooling towers or thickeners Can also incorporate a drywell sealing system to prevent oil leakage at the output shaft in vertical mounting positions Torque range of 16 48 knm MC Compact Series Power in its most compact form Space saving parallel shaft gear units or right angle gear units Compact helical and bevel helical gear units Available in eight sizes Torque range of 6 48 knm Local assembly Forced lubrication Local stock holding Industrial gear integrated drive packages Comprising closely matched components; gear unit, couplings, motor, drive base, guarding SEW engineered steel drive base locally designed for Australian conditions All components mounted to base and laser aligned One order, one responsibility, one stop shop Customised IG & XP Planetary Custom gear units up to 60 tonnes in weight Max torque to 5,000 knm Helical, bevel helical, torque split units and planetary for extra heavy duty mining, sugar and industrial applications Housing sizes up to 8m long, 4m high All components made in-house with state of the art machine tools Factory load testing before dispatch available
08 Mining Solutions Standard gear units and gearmotors To solve your drive task, gear units and gearmotors from SEW-EURODRIVE are available in numerous sizes and reduction ratios. They transmit power either in axial, parallel or with right angle power flow direction. Torque and permissible overhung loads are incomparably high in relation to the structural volume of the gear unit. This is made possible by the compact and extremely rigid housing with its low weight and optimum magnetic flux flow. The sealing surfaces are not subject to any load pressure as the force flows through the single piece housing. Your benefit: reliable gearmotor system with a long service life. RX and R series helical gear units and gearmotors In line helical gear units offer optimum performance, minimizing space requirements due to fine graduation variety of torque ratings. - Torque: 50 to 18,000 Nm - Power: 0.09 to 160 kw - Six single-stage sizes - Fourteen two-stage and three-stage sizes - High efficiency independent of output speed - Extended output housing for agitator applications Available designs: - Single-stage or multi-stage - Foot or flange-mounted - Flange-mounted with extended bearing hub F series parallel shaft helical gear units and gearmotors Extra-slim parallel shaft helical gearmotors for use where space is limited. - Torque: 87 to 18,000 Nm - Power: 0.12 to 200 kw - Very slim version in parallel shaft design - High efficiency independent or output speed Available designs: - Foot or flange-mounted - B5 or B14 flange-mounted - Solid or hollow shaft - Hollow shaft with keyed connection, shrink disk, splined hollow shaft or TorqLOC K series helical-bevel gear units and gearmotors Angular helical bevel gear units provide a reduced installation space requirement. - Torque: 125 to 50,000 Nm - Power: 0.12 to 200 kw - Wear-free gearing - High efficiency independent of input speed Available designs: - Foot or flange-mounted - B5 or B14 flange-mounted - Solid or hollow shaft - Hollow shaft with keyed connection, shrink disk, splined hollow shaft or TorqLOC
03 09 Frequency Inverters The SEW-EURODRIVE range of frequency inverters is graded to suit simple speed control through to advanced positioning applications. The versatile unit concepts together with scalable control and expansion options allow for close matching the exact inverter model to suit the individual requirements and size of the application. Frequency inverter technology from SEW-EURODRIVE contributes to increased system efficiency and flexibility in facilities around the world. MOVITRAC LTE B basic frequency inverter - Cost effective solution for price sensitive applications - Available in both single and 3-phase - IP20 or IP66 enclosure - 40 configurable parameters - Small physical size - Simple mechanical & electrical installation - Powerful features - Integrated key-pad - Parameter module for data transfer - Fieldbus expandable via gateway option - Power: 0.37 to 11 kw MOVITRAC LTP standard frequency inverter - Price conscious variable speed solution - Simple installation and operation - Powerful features - Integrated RFI filters - Fieldbus expandable via gateway option - IP20 enclosure - Available in both single and 3-phase - High overload capacity - Integrated key-pad - Power: 0.75 to 160 kw
10 Service SEW-EURODRIVE Industrial Gear Service Centres Complete Drive Service from SEW-EURODRIVE It makes sense that the people who originally build your product are best to restore it to its original condition, using genuine parts together with approved manufacturing procedures. Since SEW-EURODRIVE s Direct Repair Service does not compromise any of our processes, every rebuild comes with a comprehensive 12 month warranty. Our entire service portfolio is available for industrial gear units, so why not take advantage of the comprehensive technical expertise of a global player to ensure reliability for your operation and processes worldwide. Our specialists will gladly provide assistance from start-up through to modernization even for non-sew-eurodrive gear units at an SEW Service Centre location. Your advantages: Complete service from one source for industrial gear units Delivery and repair program encompasses couplings, oil cooler, sensors and motors Individual complete solutions for your requirements of technical drive tasks Prevention of unscheduled production downtimes and standstills in conjunction with other CDS modules Maintenance and overhaul also for non-sew-eurodrive products High availability of spare parts Cost and time saving thanks to professional maintenance, overhaul and modification Comprehensive 12 month parts and labour warranty Workshop Facilities*: 10t (or larger) overhead travelling crane 100t 200t Roll-Bed press Portable hydraulic puller & parts freezer Large capacity electric oven Bearing Induction heater No-load test rig gearboxes only Wash bay & parts washer Workshop Capabilities: Overhaul & repair of SEW-EURODRIVE IG Gearboxes Assembly & alignment of new drive assemblies No-load testing gearboxes only SEW-EURODRIVE IG Service Centres: Sydney Melbourne Brisbane Perth *workshop facilities may vary from state to state
Drive Technology \ Drive Automation \ System Integration \ Services 11 More Efficiency with Drive Systems from SEW-EURODRIVE Mining Industry The new SEW-EURODRIVE IG factory in Bruchsal, Germany
Drive Technology SEW-EURODRIVE \ Drive Automation Driving \ System the world Integration \ Services More Efficiency with Drive Systems from SEW-EURODRIVE Mining Industry SEW-EURODRIVE Driving the world SEW-EURODRIVE is right here for you: Melbourne (Head Office) 27 Beverage Drive Tullamarine VIC 3043 Phone (03) 9933 1000 Fax (03) 9933 1003 Sydney 9 Sleigh Place Wetherill Park NSW 2164 Phone (02) 9725 9900 Fax (02) 9725 9905 Brisbane Unit 1, 34 Collinsvale Street Rocklea QLD 4106 Phone (07) 3276 5100 Fax (07) 3276 5102 Townsville 12 Leyland Street Garbutt QLD 4814 Phone (07) 4779 4333 Fax (07) 4779 5333 Perth 10 Colin Jamieson Drive Welshpool WA 6106 Phone (08) 9251 4900 Fax (08) 9251 4903 Adelaide 9C Park Way Mawson Lakes SA 5095 Phone (08) 8161 4000 Fax (08) 8161 4002 1300 SEW AUS (1300 739 287) to be directed to your nearest office www.sew-eurodrive.com.au mail@sew-eurodrive.com.au