Shell Chemicals Data Sheet Re-Issued: 02-Jul-2003 Product Name SHELLSOL OMS This product is manufactured at more than one production site. site below to obtain the right datasheet: Click on the production ed States Canada 1
Shell Chemicals Data Sheet CAS Registry Number 64741-65-7 : Re-Issued: 21-Nov-2003 Product Name SHELLSOL OMS Product Code Q7432 Montreal Product Category Isoparaffins Description SHELLSOL OMS is an isoparaffinic solvent which has been synthesized from selected hydrocarbons under conditions that exclude virtually all odor-producing fractions. The product is consequently highly stable and retains its virtually odorless quality under normal conditions and extended storage. APPLICATIONS: Surface coatings, aerosol sprays, specialty formulations, and reaction media. Sales Specification Min Color Saybolt ASTM D156 30 Max #Kauri-Butanol Value - ASTM D1133 29 Appearance - ASTM D4176 CFFSM #Density @15.6 C kg/m³ ASTM D4052 740 775 #Copper Corrosion - ASTM D130 1 (3hr @100 C) Distillation, IBP C ASTM D86 171 Distillation, DP C ASTM D86 210 Odor - ASTM D1296 Pass #Specific Gravity ASTM D4052 0.740 0.775 @15.6 C/15.6 C Flash Point (TCC) C ASTM D56 43.5 #Aromatics % v/v ASTM D3257 0.25 # Indicates guaranteed property with typical result on Certificate of Analysis. 1
Typical Properties Value Distillation, IBP C ASTM D86 175 Distillation, 50%v C ASTM D86 181 Distillation, DP C ASTM D86 205 Flash Point C ASTM D56 45 API Gravity - ASTM D4052 55.4 Aromatics %v/v ASTM D3257 <0.1 Benzene ppm GC <1 Cycloparaffins %wt GC 2 Paraffins %wt GC 98 Aniline Point (M=Mixed) C ASTM D611 84 Kauri-Butanol Value - ASTM D1133 28 Hildebrand Solubility (cal/cm³)^½ - 7.4 Parameter Color Saybolt ASTM D156 +30 Vapor Pressure @20 C kpa Calculated 0.10 Health, Safety & Environment Contact Warranty Relative Evaporation - ASTM D3539 0.10 Rate (nbuac=1) Auto Ignition C ASTM E659 348 Temperature Fractional Polarity - - 0 Hydrogen Bonding - - 0.0 Index Molecular Weight g/mol Calculated 166 Information on product storage and handling, hazards and environmental regulation status is in the Material Data Sheet. To obtain a Material Data Sheet, visit our website at www.shell.com/chemicals. For further information, contact your Shell representative, visit our website at www.shell.com/chemicals, or call the 'Shell Chemicals' order center at 1 800 USA SHELL in US or 1 888 791 4314 in Canada. All products purchased from or supplied by Shell are subject to terms and conditions set out in the contract, order acknowledgement and/or bill of lading. Shell warrants that its product will meet those specifications designated as such herein or in other publications. All other information including that herein, supplied by Shell is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shell 2
makes no other warranty either expressed or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from use thereof; that any products shall be merchantable or fit for any purpose; or that the use of such other information or product will not infringe any patent. The expression 'Shell Chemicals' refers to the companies of the Royal Dutch/Shell Group which are engaged in chemical businesses. Each of the companies which make up the Royal Dutch/Shell Group of companies is an independent entity and has its own separate identity. SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal Dutch/Shell Group of companies. 3
Shell Chemicals Data Sheet CAS Registry Number 64741-65-7 : Re-Issued: 01-Oct-2003 Product Name SHELLSOL OMS Product Code Q7432 Woodriver Product Category Isoparaffins Description SHELLSOL OMS is an isoparaffinic solvent which has been synthesized from selected hydrocarbons under conditions that exclude virtually all odor-producing fractions. The product is consequently highly stable and retains its virtually odorless quality under normal conditions and extended storage. APPLICATIONS: Surface coatings, aerosol sprays, specialty formulations, and reaction media. Sales Specification Min Color Saybolt ASTM D156 +30 Max #Kauri-Butanol Value - ASTM D1133 29 Appearance - ASTM D4176 CFFSM #Density @15.6 C kg/m³ ASTM D4052 740 775 #Copper Corrosion - ASTM D130 1 (3hr @100 C) Distillation, IBP C ASTM D86 171 Distillation, DP C ASTM D86 210 Odor - ASTM D1296 Pass #Specific Gravity - ASTM D4052 0.740 0.775 @15.6 C/15.6 C Flash Point (TCC) C ASTM D56 43.5 #Aromatics % v/v ASTM D3257 0.25 # Indicates guaranteed property with typical result on Certificate of Analysis. COA Comments 1) Product meets Federal Specification TT-291f, Type III and FDA 21 1
property limit but is not routinely tested. 3) Conformance to specification limits is determined in accordance with ASTM E29-67, Rounding off. 4) Product contains approximately 25 ppm BHT. Typical Properties Value Distillation, IBP C ASTM D86 175 Distillation, 50%v C ASTM D86 181 Distillation, DP C ASTM D86 205 Flash Point C ASTM D56 53 API Gravity - ASTM D4052 55.4 Aromatics %v/v ASTM D3257 <0.1 Benzene ppm GC <1 Cycloparaffins %wt GC 2 Paraffins %wt GC 98 Aniline Point (M=Mixed) C ASTM D611 84 Kauri-Butanol Value - ASTM D1133 28 Hildebrand Solubility (cal/cm³)^½ - 7.4 Parameter Color Saybolt ASTM D156 +30 Vapor Pressure @20 C kpa Calculated 0.10 Health, Safety & Environment Contact Warranty Relative Evaporation - ASTM D3539 0.10 Rate (nbuac=1) Auto Ignition C ASTM E659 348 Temperature Fractional Polarity - - 0 Hydrogen Bonding - - 0.0 Index Molecular Weight g/mol Calculated 166 Information on product storage and handling, hazards and environmental regulation status is in the Material Data Sheet. To obtain a Material Data Sheet, visit our website at www.shell.com/chemicals. For further information, contact your Shell representative, visit our website at www.shell.com/chemicals, or call the 'Shell Chemicals' order center at 1 800 USA SHELL in US or 1 888 791 4314 in Canada. All products purchased from or supplied by Shell are subject to terms and conditions set out in the contract, order 2
acknowledgement and/or bill of lading. Shell warrants that its product will meet those specifications designated as such herein or in other publications. All other information including that herein, supplied by Shell is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shell makes no other warranty either expressed or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from use thereof; that any products shall be merchantable or fit for any purpose; or that the use of such other information or product will not infringe any patent. The expression 'Shell Chemicals' refers to the companies of the Royal Dutch/Shell Group which are engaged in chemical businesses. Each of the companies which make up the Royal Dutch/Shell Group of companies is an independent entity and has its own separate identity. SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal Dutch/Shell Group of companies. SC: 2928-00 3