Engine Silencing Solutions

Engine Silencing Solutions 25 Years of Experience in the Power-Gen, Off-Highway, Industrial, and Marine Industries Manufactured by: EM PRODUTS Phillips & Temro Industries LITE01-3200 3200-001

ontact Information Engine Exhaust Silencers and ccessories Manufacturing Facilities EM Products Division Phillips & Temro Industries 5380 ottonwood Lane Prior Lake, MN 55372 Ph# 952-440-9200 Fax# 952-440-3400 Phillips & Temro Industries, Ltd. 100 Paquin Road Winnipeg, M R2J 3V4 anada Ph# 204-654-6296 Fax# 204-661-2639 old Weather Starting, omfort, and Emissions ontrol Products Manufacturing Facilities Phillips & Temro Industries, Ltd. 100 Paquin Road Winnipeg, M R2J 3V4 anada Ph# 1-800-328-6108 Fax# 952-941-2285 Phillips & Temro Industries 9700 W 74th Street Eden Prairie, MN 55344 Ph# 952-941-9700 Fax# 952-941-2285 Visit us at www.phillipsandtemro.com Local Sales Representative / Distributor OWL and EM Products are a registered trademark of Phillips & Temro Industries, Inc. We reserve the right to change specifications appearing without incurring an obligation for equipment previously or subsequently sold. Dimensions and weights are nominal and may vary slightly with production models. Page 2

Serving Your omplete System Needs Phillips & Temro Industries Silencer Division is a comprehensive manufacturer of industrial silencers for a multitude of applications suitable for diesel, gas and gaseous engines. We cover a size range of engine silencing from as small as 20 horsepower up to 10,000 horsepower. Today, we serve leading manufacturers and distributors in various markets including Power Generation, Off-Highway and Industrial Mobile equipment, ommercial Marine and Gas ompression. Phillips & Temro is a leader in these markets because we offer a full range of standardized silencers and accessories as well as custom engineered sound attenuation solutions to meet our customer s requirements. Our engineering staff within the Silencer Division is fully capable to design and manufacture exhaust systems to a high level of performance through computer system modeling, analysis and testing. Our silencers are designed and developed utilizing a full complement of computer generated models and acoustic performance analysis tools. These software tools together with bench testing data collection allow our engineering team to accurately design high performing silencing systems. TLE OF ONTENTS ONTENTS PGE # ylindrical Industrial - JI Series 6 Residential - JR Series 7 ritical - J Series 8 Hospital - JH Series 9 Tandem LP Series 10 Tandem LPH Series 11 Low Pressure Drop Residential - Low Pressure TU Series 12 ritical - Low Pressure TU Series 13 Disk ritical - DK2 Series 14 Hospital - DHK Series 15 Disk - High Pressure Series ritical - High Pressure DP2 Series 16 Hospital - High Pressure DHP Series 17 Spark rresting Industrial - SSU Series 18 Residential - SRU Series 19 ritical - SU Series 20 Hospital - SHU Series 21 Industrial - TEX SS Series 22 Residential - TEX SR Series 23 ritical - TEX S Series 24 Hospital - TEX SH Series 25 Industrial - SU Series 26 ritical - Disk DS Series 27 Hospital - Disk DHS Series 28 ESSORIES Rain Guards and aps Rainguards Model RGF 29 Rainguards Model RGS 29 Pipe Raincaps Model RP 30 Tube Raincaps Model RT 30 Elbows 90 Short Radius Tube 31 90 Short Radius Tube With Flange One End 32 Outlet Extension Straight Tube NSI Flange oth Ends 33 Flanges 125/150# NSI Model PFL 34 125/150# NSI Model TFL 35 Single Reducing Plate Model REFL 36 Double Reducing Plate Model DREFL 37 ast Iron Screwed Model FLT 38 aterpillar Model FL 39 Detroit Diesel / Mitsubishi Model DFL 40 ummins / Onan Model UFL 41 Mounting ands Round RM Model 42 Oval OM Model 42 Gaskets Ring Gaskets and Gasket Kits 43 Ring Gaskets and Gasket Kits 44 aterpillar, ummins, Detroit Diesel / MTU Flex onnectors Male NPT / Male NPT 45 Male NPT / Slotted uff 45 20 Degree Lip Flange / Male NPT 46 Slotted uff / Slotted uff 46 Flange / Flange 47 Flange / Male NPT 47 Flange / Slotted uff 48 Flange / Female NPT 48 Flange / 20 Degree Lip Flange 49 Flange / Flanged 90 Elbow 49 Male NPT / Flanged 90 Elbow 50 Female NPT / Flanged 90 Elbow 50 Mounting Supports Type and Mounting Legs 51 Type D Vertical Shell Lug Supports 52 Type E Horizontal Shell Lug Supports 53 Type F Horizontal Saddle Supports 54 Other Sure Seal lamps 55 Explosion Relief overs 56 Inspection Ports 57 Wall Thimbles 58 Wye onnector ummins 59-60 aterpillar 61 Detroit 62-65 Limited Warranty 68 Page 3

Serving Your omplete System Needs Single Silencer with Single Inlet Engine Exhaust Silencer & ccessories: 7 2 1 3 7 6 4 5 1. Silencer 2. Flex onnection 3. Mounting and 4. Rain ap 5. Mitered Exhaust 6. Elbows 7. Flange/Gasket Exhaust System omponents: Single Silencer with Wye onnection 4 Engine to Silencer: 321 stainless steel, annular corrugated flexible exhaust hose shall be used in between the engine outlet connection and the silencer inlet connection. 1 3 7 7 2 6 5 Silencer Exhaust Pipe: The exhaust tail pipe extending from the silencer outlet shall use the minimum amount of elbows (90 and 45 ) and straight pipe to stay within the manufacturers maximum allowable back pressure. Dual Silencers with Single Inlet 1 3 7 7 6 4 Silencer and Piping Supports: The silencer and piping system shall be mounted so that its weight is not supported by the engine. When at all possible, a vibration isolating type mounting support shall be used. Exhaust Pipe Termination: The exhaust pipe extending from the silencer shall use a rain cap or mitered exhaust with bird screen at the end of each exhaust run to prevent rain, snow, birds, debris, etc. from entering the engine exhaust system when the engine is not running. 2 5 The total exhaust system when at all possible, shall be the product of a single manufacture. This will insure the best form, fit and function during exhaust system installation and operations. The total exhaust system includes the silencer, silencer mounting supports, flex connector and accessories. Where applicable, the exhaust system components shall be supplied with a 1200 satin black finish. When a specified d level is required for a certain distance, please consult silencer manufacturer for correct silencer model and design. Page 4

Serving Your omplete System Needs Disk Silencer* with Dual ottom Inlet/Top Outlet pplications Power Modules Marine Engine Rooms Drop-Over Enclosures Space Limited pplications *Shown with Optional ccessories Disk Silencer* with Single ottom Inlet/Side Outlet Wye Option *Shown with Optional ccessories onsult your sales representative or the factory for various construction options: Specific inlet/outlet configurations and orientations Flush mounted flanges Flanges with weld nuts Integral roof plate design omprehensive line of exhaust accessories Stainless steel construction Internal Thermal Insulation Top, ottom and Side Walls coustically Engineered to Obtain Sound Pressure Objectives Effective Noise Reduction for Limited Space pplications Page 5

Engine Exhaust Silencers Model JI Series Industrial Grade End Inlet/End Outlet Side Inlet/End Outlet D E F Part Number D WT JIE-02-300060 2 6 24 12 JIE-25-300061 2.5 8 24 18 JIE-03-300062 3 8 25 20 JIE-35-300063 3.5 10 31 30 JIE-04-300064 4 10 32 31 JIE-05-300065 5 12 44 45 JIE-06-300066 6 12 44 50 JIE-08-300067 8 18 56 120 JIE-10-300068 10 22 72 180 JIE-12-300069 12 26 72 250 JIE-14-300070 14 30 84 375 JIE-16-300071 16 36 100 470 JIE-18-300072 18 42 104 1155 JIE-20-300073 20 48 103 1360 Part Number E F WT JIS-02-400090 2 6 22 5.5 3.0 12 JIS-25-400091 2.5 8 22 6.5 3.7 18 JIS-03-400092 3 8 22 7 4.2 20 JIS-35-400093 3.5 10 29 8 5 30 JIS-04-400094 4 10 29.5 8.5 5.5 31 JIS-05-400095 5 12 41.6 10 7.6 50 JIS-06-400096 6 12 41.6 10 7.6 50 JIS-08-400097 8 18 54.5 13 10.5 120 JIS-10-400098 10 22 69 15 15 180 JIS-12-400099 12 26 69.5 17 17 250 JIS-14-400100 14 30 82 19 20 375 JIS-16-400101 16 36 97 22 23 470 JIS-18-400102 18 42 101 25 26.5 1155 JIS-20-400103 20 48 101.5 28 26 1360 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 30 25 TTENUTION (d) 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for JI Series Silencers Typical reduction = 12 18 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 6

Engine Exhaust Silencers Model JR Series Residential Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT JRE-02-500071 2 6 30 17 JRE-25-500072 2.5 8 30 24 JRE-03-500073 3 8 31 26 JRE-35-500074 3.5 10 43 42 JRE-04-500075 4 10 44 44 JRE-05-500076 5 12 56 75 JRE-06-500077 6 12 56 75 JRE-08-500078 8 18 68 155 JRE-10-500079 10 22 84 220 JRE-12-500080 12 26 96 325 JRE-14-500081 14 30 120 505 JRE-16-500082 16 36 136 870 JRE-18-500083 18 42 138 1280 JRE-20-500084 20 48 143 1700 Part Number E F WT JRS-02-600181 2 6 28 5.5 3 17 JRS-25-600182 2.5 8 28.5 6.5 3.6 24 JRS-03-600183 3 8 29 7 4.1 26 JRS-35-600184 3.5 10 41 8 5 42 JRS-04-600185 4 10 41.5 8.5 5.5 44 JRS-05-600186 5 12 54 10 6.6 75 JRS-06-600187 6 12 54 10 7.6 75 JRS-08-600188 8 18 66.5 13 10.5 155 JRS-10-600189 10 22 81 15 15 220 JRS-12-600190 12 26 93.5 17 17.5 325 JRS-14-600191 14 30 118 19 20 505 JRS-16-600192 16 36 133 22 23 870 JRS-18-600193 18 42 135.5 25 31.5 1280 JRS-20-600211 20 48 139 28 35 1700 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 40 35 TTENUTION (d) 30 25 20 15 10 5 Representative ttenuation urve for JR Series Silencers Typical reduction = 18 25 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 7

Engine Exhaust Silencers Model J Series ritical Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT JE-02-100071 2 6 42 29 JE-25-100072 2.5 8 42 38 JE-03-100073 3 8 43 43 JE-35-100074 3.5 10 55 72 JE-04-100075 4 10 56 72 JE-05-100076 5 12 68 81 JE-06-100077 6 12 68 84 JE-08-100078 8 18 92 249 JE-10-100079 10 22 108 370 JE-12-100080 12 26 120 506 JE-14-100081 14 30 132 743 JE-16-100082 16 36 160 1050 JE-18-100083 18 42 174 1750 JE-20-100084 20 48 203 2550 Part Number E F WT JS-02-200381 2 6 39.75 5.5 7.25 29 JS-25-200382 2.5 8 39.88 6.5 7.38 38 JS-03-200383 3 8 40.62 7 7.38 43 JS-35-200384 3.5 10 53.0 8 9.25 72 JS-04-200385 4 10 53.5 8.5 9.25 72 JS-05-200386 5 12 65.62 10 12.25 81 JS-06-200387 6 12 65.62 10 12.25 84 JS-08-200388 8 18 90.50 13 16.5 249 JS-10-200389 10 22 105.0 15 20.0 370 JS-12-200390 12 26 117.5 17 21.5 506 JS-14-200391 14 30 130.0 19 23.0 743 JS-16-200392 16 36 157.0 22 29.0 1050 JS-18-200393 18 42 171.5 25 33.0 1750 JS-20-200467 20 48 199 27 36.0 2818 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 45 40 TTENUTION (d) 35 30 25 20 15 10 5 Representative ttenuation urve for J Series Silencers Typical reduction = 25 34 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 8

Engine Exhaust Silencers Model JH Series Hospital Grade End Inlet/End Outlet Side Inlet/End Outlet D E F Part Number D WT JHE-02-105030 2 10 44 55 JHE-25-105031 2.5 12 46 75 JHE-03-105032 3 12 46 75 JHE-35-105033 3.5 14 60 110 JHE-04-105034 4 14 60 115 JHE-05-105035 5 18 68 180 JHE-06-105036 6 18 68 185 JHE-08-105037 8 26 96 460 JHE-10-105038 10 30 110 680 JHE-12-105039 12 36 126 855 JHE-14-105040 14 42 138 1370 JHE-16-105041 16 42 162 1600 JHE-18-105042 18 48 205.5 2650 JHE-20-105051 20 60 220 4500 Part Number E F WT JHS-02-205170 2 10 41.5 8.5 5.5 55 JHS-25-205171 2.5 12 42.5 10 7.75 75 JHS-03-205172 3 12 42.5 10 7.75 75 JHS-35-205173 3.5 14 56.5 11 9.5 110 JHS-04-205174 4 14 56.5 11 9.5 115 JHS-05-205175 5 18 66.5 13 10.5 180 JHS-06-205176 6 18 66.5 13 10.5 185 JHS-08-205177 8 26 93.5 17 17.5 460 JHS-10-205178 10 30 108 19 20 680 JHS-12-205179 12 36 122 22 23 855 JHS-14-205180 14 42 135 25 24 1370 JHS-16-205181 16 42 159 25 28 1600 JHS-18-205182 18 48 201.5 28 38 2650 JHS-20-205219 20 60 216 34 40 4500 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 50 45 TTENUTION (d) 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for JH Series Silencers Typical reduction = 35 40 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 9

Tandem LP Series ritical Grade D F SEONDRY W PRIMRY Part Number D H K L M WT LP-04-200279 4.0 12.0 40.0 10.0 6.0 38.0 130 LP-05-200280 5.0 14.0 53.0 10.0 7.0 42.0 196 LP-06-200281 6.0 16.0 53.0 11.0 7.5 50.0 254 LP-08-200282 8.0 16.0 53.0 11.0 8.5 54.0 275 LP-10-200283 10.0 20.0 67.0 13.0 10.0 66.0 540 LP-12-200284 12.0 22.0 67.0 15.0 11.5 74.0 645 LP-14-200285 14.0 26.0 68.0 17.0 13.0 86.0 1010 LP-16-200286 16.0 28.0 81.0 18.0 14.0 94.0 1500 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 60 50 40 30 20 10 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for LP Series Silencers Typical reduction = 37 43 d Internal thermal/acoustic insulation Low profile luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 10

Tandem LPH Series Hospital Grade D F SEONDRY W PRIMRY Part Number D H K L M WT LPH-04-205101 4.0 12.0 52.0 10.0 6.0 38.0 168 LPH-05-205102 5.0 14.0 76.5 10.0 7.0 42.0 276 LPH-06-205103 6.0 16.0 65.0 11.0 7.5 50.0 315 LPH-08-205104 8.0 16.0 77.0 11.0 8.5 54.0 390 LPH-10-205105 10.0 20.0 90.0 13.0 10.0 66.0 720 LPH-12-205106 12.0 22.0 91.0 15.0 11.5 74.0 885 LPH-14-205107 14.0 26.0 104.0 17.0 13.0 86.0 1350 LPH-16-205108 16.0 28.0 129.0 18.0 14.0 94.0 2000 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 60 TTENUTION (d) 50 40 30 20 10 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for LPH Series Silencers Typical reduction = 42 48 d Internal thermal/acoustic insulation Low profile luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 11

Low Pressure Drop TU Series Residential Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT TUE-04-980999 4 8 36 22 TUE-05-980400 5 10 51 71 TUE-06-980401 6 10 60 75 TUE-08-980265 8 14 66 140 TUE-10-980403 10 16 70 180 TUE-12-980404 12 18 70 225 TUE-14-980405 14 20 88 340 TUE-16-980406 16 24 108 480 TUE-18-980407 18 26 108 540 TUE-20-980408 20 28 132 840 TUE-22-980409 22 36 136 1140 TUE-24-980410 24 36 196 1600 Part Number E F WT TUS-04-980414 4 8 33 9 4 62 TUS-05-980415 5 10 48 9 4 71 TUS-06-980416 6 10 57 9 7 75 TUS-08-980009 8 14 63 11 8 140 TUS-10-980007 10 16 67 12 10 180 TUS-12-980188 12 18 67 13 11 225 TUS-14-980420 14 20 85 14 12 340 TUS-16-980016 16 24 105 16 14 480 TUS-18-980422 18 26 105 17 15 540 TUS-20-981473 20 28 129 18 17 840 TUS-22-981474 22 36 133 22 19 1140 TUS-24-981475 24 36 193 22 20 1600 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 25 TTENUTION (d) 20 15 10 5 Representative ttenuation urve for TU Series Silencers Typical reduction = 12 15 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 12

Low Pressure Drop TU Series ritical Grade End Inlet/End Outlet Side Inlet/End Outlet D E F Part Number D WT TUE-04-980849 4 10 54 72 TUE-05-980850 5 10 54 72 TUE-06-980851 6 12 66 90 TUE-08-980638 8 14 78 145 TUE-10-980260 10 16 82 205 TUE-12-980435 12 22 89 340 TUE-14-980436 14 26 110 475 TUE-16-980437 16 26 132 680 TUE-18-980438 18 36 184 1500 TUE-20-980439 20 42 198 1800 TUE-22-980440 22 48 200 2300 TUE-24-980441 24 54 262 4000 Part Number E F WT TUS-04-980445 4 10 51 9 4 72 TUS-05-980446 5 10 51 9 4 72 TUS-06-980447 6 12 63 10 5 90 TUS-08-980448 8 14 75 11 6 145 TUS-10-980449 10 16 79 12 10 205 TUS-12-980450 12 22 86 15 11 340 TUS-14-980451 14 26 107 17 12 475 TUS-16-980452 16 26 129 17 14 680 TUS-18-980453 18 36 181 22 18 1500 TUS-20-980454 20 42 195 25 19 1800 TUS-22-980455 22 48 197 28 21 2300 TUS-24-980456 24 54 259 31 22 4000 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 35 30 25 20 15 10 5 Representative ttenuation urve for TU Series Silencers Typical reduction = 17 22 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 13

Disk Silencers DK2 Series ritical Grade L H D Part Number D H K L M WT DK2-04-200751 4 16.5 27 8 30.50 11 1.00 140 DK2-05-200752 5 18.0 30 10 33.50 13 1.00 250 DK2-06-200753 6 19.5 33 12 36.50 15 1.00 310 DK2-08-200754 8 26.5 47 14 50.50 17 1.00 435 DK2-10-200755 10 29.5 53 16 56.50 19 1.00 650 DK2-12-200756 12 34.0 62 18 66.50 21 1.25 925 DK2-14-200757 14 36.0 66 24 70.50 27 1.25 1090 DK2-16-200758 16 40.0 74 26 78.50 29 1.25 1500 DK2-18-200759 18 45.5 85 28 89.50 31 1.25 1890 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for DK2 Series Silencers Typical reduction = 22 36 d Internal thermal/acoustic insulation Various inlet/outlet configuration and orientations available arbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 14

Disk Silencers DHK Series Hospital Grade L H D Part Number D H K L M WT DHK-04-205349 4 20.5 35 8 38.5 11 1.00 200 DHK-05-205350 5 21.5 37 12 40.5 15 1.00 255 DHK-06-205351 6 23.0 40 12 43.5 15 1.00 310 DHK-08-205352 8 29.5 53 14 56.5 17 1.00 630 DHK-10-205353 10 32.5 59 16 62.5 19 1.00 855 DHK-12-205354 12 38.5 71 20 75.5 23 1.25 1245 DHK-14-205355 14 39.0 72 24 76.5 27 1.25 1300 DHK-16-205356 16 41.0 76 28 80.5 31 1.25 1590 DHK-18-205357 18 46.5 87 30 91.5 33 1.25 2045 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 50 45 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for DHK Series Silencers Typical reduction = 26 43 d Internal thermal/acoustic insulation Various inlet/outlet configuration and orientations available arbon steel construction Stainless steel construction available ontact factory for custom fit applications Page 15

Disk Silencers - DP2 High Pressure Series ritical Grade L H D Part Number D H K L M WT DP2-04-90010563 4 16.5 27 8 30.5 11 1.00 140 DP2-05-90010564 5 18.0 30 10 33.5 13 1.00 250 DP2-06-90010565 6 19.5 33 12 36.5 15 1.00 310 DP2-08-90010566 8 26.5 47 14 50.5 17 1.00 520 DP2-10-90010567 10 29.5 53 16 56.5 19 1.00 750 DP2-12-90010568 12 34.0 62 18 66.5 21 1.25 925 DP2-14-90010569 14 36.0 66 24 70.5 27 1.25 1090 DP2-16-90010570 16 40.0 74 26 78.5 29 1.25 1500 DP2-18-90010571 18 45.5 85 28 89.5 31 1.25 1890 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuations urve for DP2 Series Silencers Typical reduction = 22-36 d Internal thermal/acoustic insulation Various inlet/outlet configuration and orientations arbon steel construction Stainless steel construction available ontact factory for custom fit applications Pressure rated to 1.5psi dditional pressure sensors and relief valves recommended for below water discharge in marine applications to ensure pressure rating is not exceeded Page 16

Disk Silencers - DHP High Pressure Series Hospital Grade L H D TTENUTION (d) Part Number D H K L M WT DHP-04-90010572 4 20.5 35 8 38.5 11 1.00 200 DHP-05-90010573 5 21.5 37 12 40.5 15 1.00 255 DHP-06-90010574 6 23.0 40 12 43.5 15 1.00 400 DHP-08-90010575 8 29.5 53 14 56.5 17 1.00 750 DHP-10-90010576 10 32.5 59 16 62.5 19 1.00 925 DHP-12-90010577 12 38.5 71 20 75.5 23 1.25 1245 DHP-14-90010578 14 39.0 72 24 76.5 27 1.25 1300 DHP-16-90010579 16 41.0 76 28 80.5 31 1.25 1590 DHP-18-90010580 18 46.5 87 30 91.5 33 1.25 2045 Note: Standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 50 Representative ttenuations urve for DHP Series Silencers 45 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Typical reduction = 26-43 db Internal thermal/acoustic insulation Various inlet/outlet configuration and orientations arbon steel construction Stainless steel construction available ontact factory for custom fit applications Pressure rated to 1.5psi dditional pressure sensors and relief valves recommended for below water discharge in marine applications to ensure pressure rating is not exceeded Page 17

Spark rrestors SSU Series Industrial Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT SSUE-04-980338 4 14 32 82 SSUE-05-980218 5 14 42 102 SSUE-06-980340 6 18 49 162 SSUE-08-980341 8 22 50 245 SSUE-10-980342 10 26 63 330 SSUE-12-980343 12 30 76 555 SSUE-14-980344 14 36 78 825 SSUE-16-980345 16 42 81 860 SSUE-18-980346 18 48 100 1390 SSUE-20-980347 20 48 118 1540 SSUE-22-980348 22 54 120 1900 SSUE-24-980349 24 60 132 2270 Part Number E F WT SSUS-04-981189 4 14 30.25 11 5.50 82 SSUS-05-981190 5 14 39.75 11 7.00 102 SSUS-06-981191 6 18 45.50 13 8.25 162 SSUS-08-981192 8 22 46.50 17 9.75 245 SSUS-10-981193 10 26 59.50 19 11.50 330 SSUS-12-981194 12 30 73.00 20 13.25 555 SSUS-14-981195 14 36 75.50 24 15.00 825 SSUS-16-981196 16 42 79.00 27 16.50 860 SSUS-18-981197 18 48 97.00 33 19.00 1390 SSUS-20-981198 20 48 115.00 33 20.00 1540 SSUS-22-981199 22 54 116.50 36 22.00 1900 SSUS-24-981200 24 60 129.50 39 23.50 2270 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 30 TTENUTION (d) 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for SSU Series Silencers Typical reduction = 12 18 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Type approval in accordance with DNV-OS-D101 and EN 1834-1 Page 18

Spark rrestors SRU Series Residential Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT SRUE-04-980353 4 14 42 102 SRUE-05-980354 5 14 66 152 SRUE-06-980355 6 18 61 202 SRUE-08-980356 8 22 73 325 SRUE-10-980357 10 26 93 505 SRUE-12-980358 12 30 112 755 SRUE-14-980359 14 36 108 1005 SRUE-16-980360 16 42 111 1115 SRUE-18-980361 18 48 118 1565 SRUE-20-980362 20 48 142 1805 SRUE-22-980363 22 54 144 2195 SRUE-24-980364 24 60 144 2425 Part Number E F WT SRUS-04-981304 4 14 39.50 11 5.50 102 SRUS-05-981305 5 14 63.50 11 7.00 152 SRUS-06-981306 6 18 57.50 13 8.25 202 SRUS-08-981307 8 22 69.50 17 9.75 325 SRUS-10-981308 10 26 89.50 19 11.50 505 SRUS-12-981309 12 30 109.00 20 13.25 755 SRUS-14-981310 14 36 105.50 24 15.00 1005 SRUS-16-981311 16 42 109.00 27 16.50 1115 SRUS-18-981406 18 48 115.00 33 19.00 1565 SRUS-20-981312 20 48 139.00 33 20.00 1805 SRUS-22-981313 22 54 140.50 36 22.00 2195 SRUS-24-981314 24 60 142.5 39 23.5 2425 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 40 TTENUTION (d) 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for SRU Series Silencers Typical reduction = 18 25 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Type approval in accordance with DNV-OS-D101 and EN 1834-1 Page 19

Spark rrestors SU Series ritical Grade End Inlet/End Outlet D Side Inlet/End Outlet E F Part Number D WT SUE-04-981416 4 14 58.50 120 SUE-05-981417 5 14 70.50 150 SUE-06-981418 6 18 72.00 210 SUE-08-981419 8 22 85.00 295 SUE-10-981420 10 26 110.00 465 SUE-12-981421 12 30 123.00 700 SUE-14-981422 14 36 137.00 900 SUE-16-981423 16 42 139.00 1400 SUE-18-981424 18 48 141.00 1225 SUE-20-981425 20 48 153.00 1320 SUE-22-981426 22 54 155.00 1700 SUE-24-981427 24 60 168.00 2270 Part Number E F WT SUS-04-981431 4 14 55.50 11.00 6.50 120 SUS-05-981432 5 14 68.00 11.00 7.00 150 SUS-06-981433 6 18 68.50 13.00 8.25 210 SUS-08-981434 8 22 81.50 17.00 9.75 295 SUS-10-981435 10 26 106.50 19.00 11.50 465 SUS-12-981436 12 30 120.00 20.00 13.25 700 SUS-14-981437 14 36 134.50 24.00 15.00 900 SUS-16-981438 16 42 137.00 27.00 16.50 1400 SUS-18-981439 18 48 138.00 33.00 19.00 1225 SUS-20-981440 20 48 150.00 33.00 20.00 1320 SUS-22-981441 22 54 151.50 36.00 22.00 1700 SUS-24-981442 24 60 166.50 39.00 23.50 2270 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 50 TTENUTION (d) 45 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for SU Series Silencers Typical reduction = 25 32 d luminized/carbon steel construction Stainless steel construction available ontact factory for custom fit applications Type approval in accordance with DNV-OS-D101 and EN 1834-1 Page 20

Spark rrestors SHU Series Hospital Grade End Inlet/End Outlet Side Inlet/End Outlet D E F Part Number D WT SHUE-04-981446 4 16 59.00 150 SHUE-05-981447 5 18 72.00 195 SHUE-06-981448 6 18 80.00 212 SHUE-08-981449 8 26 96.00 470 SHUE-10-981450 10 30 110.00 700 SHUE-12-981451 12 36 126.00 870 SHUE-14-981452 14 42 138.00 1380 SHUE-16-981453 16 42 163.00 1620 SHUE-18-981454 18 48 205.50 2920 SHUE-20-981455 20 60 220.00 4950 SHUE-22-981456 22 60 220.00 4970 SHUE-24-981457 24 66 244.00 6670 Part Number E F WT SHUS-04-981461 4 16 56.00 12.00 6.75 150 SHUS-05-981462 5 18 69.00 13.00 7.75 195 SHUS-06-981463 6 18 78.00 13.00 8.25 212 SHUS-08-981464 8 26 93.50 19.00 10.50 40 SHUS-10-981465 10 30 108.00 20.00 12.25 700 SHUS-12-981466 12 36 122.00 24.00 14.50 870 SHUS-14-981467 14 42 135.00 27.00 15.50 1380 SHUS-16-981468 16 42 159.00 27.00 16.50 1620 SHUS-18-981469 18 48 201.50 33.00 19.00 2920 SHUS-20-981470 20 60 216.00 39.00 21.50 4950 SHUS-22-981471 22 60 216.00 39.00 22.50 4970 SHUS-24-981472 24 66 241.00 42.00 24.00 6670 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 60 TTENUTION (d) 50 40 30 20 10 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuation urve for SHU Series Silencers Typical Reduction = 32 38 d luminized/arbon Steel onstruction Stainless Steel onstruction vailable ontact Factory for ustom Fit pplications Type approval in accordance with DNV-OS-D101 and EN 1834-1 Page 21

TEX Spark rrester - SS Series, Industrial Grade EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000 End Inlet/End Outlet Side Inlet/End Outlet D E Part Number D WT Part Number E F WT F SSE-04-90008888 4 14 32 82 SSE-05-90008889 5 14 42 102 SSE-06-90008890 6 18 49 162 SSE-08-90008891 8 22 50 245 SSE-10-90008892 10 26 63 330 SSE-12-90008893 12 30 76 555 SSE-14-90008894 14 36 78 825 SSE-16-90008895 16 42 81 860 SSE-18-90008896 18 48 100 1390 SSE-20-90008897 20 48 118 1540 SSE-22-90008898 22 54 120 1900 SSE-24-90008899 24 60 132 2270 SSS-04-90008904 4 14 30.25 11 5.50 82 SSS-05-90008905 5 14 39.75 11 7.00 102 SSS-06-90008906 6 18 45.50 13 8.25 162 SSS-08-90008907 8 22 46.50 17 9.75 245 SSS-10-90008908 10 26 59.50 19 11.50 330 SSS-12-90008909 12 30 73.00 20 13.25 555 SSS-14-90008910 14 36 75.50 24 15.00 825 SSS-16-90008911 16 42 79.00 27 16.50 860 SSS-18-90008912 18 48 97.00 33 19.00 1390 SSS-20-90008913 20 48 115.00 33 20.00 1540 SSS-22-90008914 22 54 116.50 36 22.00 1900 SSS-24-90008915 24 60 129.50 39 23.50 2270 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 30 TTENUTION (d) 25 20 15 10 5 Representative ttenuations urve for SS Series Silencers Typical reduction = 12-18 d 316 stainless steel construction Type approval in accordance with EN1834 parts 1, 2 & 3 to comply with TEX Directive (European Directive 94/9/E) requirements ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 22

TEX Spark rrester - SR Series, Residential Grade EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000 End Inlet/End Outlet Side Inlet/End Outlet D E Part Number D WT Part Number E F WT F SRE-04-90008920 4 14 42 102 SRE-05-90008921 5 14 66 152 SRE-06-90008922 6 18 61 202 SRE-08-90008923 8 22 73 325 SRE-10-90008924 10 26 93 505 SRE-12-90008925 12 30 112 755 SRE-14-90008926 14 36 108 1005 SRE-16-90008927 16 42 111 1115 SRE-18-90008928 18 48 118 1565 SRE-20-90008929 20 48 142 1805 SRE-22-90008930 22 54 144 2195 SRE-24-90008931 24 60 144 2425 SRS-04-90008936 4 14 39.50 11 5.50 102 SRS-05-90008937 5 14 63.50 11 7.00 152 SRS-06-90008938 6 18 57.50 13 8.25 202 SRS-08-90008939 8 22 69.50 17 9.75 325 SRS-10-90008940 10 26 89.50 19 11.50 505 SRS-12-90008941 12 30 109.00 20 13.25 755 SRS-14-90008942 14 36 105.50 24 15.00 1005 SRS-16-90008943 16 42 109.00 27 16.50 1115 SRS-18-90008944 18 48 115.00 33 19.00 1565 SRS-20-90008945 20 48 139.00 33 20.00 1805 SRS-22-90008946 22 54 140.50 36 22.00 2195 SRS-24-90008947 24 60 142.50 39 23.50 2425 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 40 TTENUTION (d) 35 30 25 20 15 10 5 Representative ttenuations urve for SR Series Silencers Typical reduction = 18-25 d 316 stainless steel construction Type approval in accordance with EN1834 parts 1, 2 & 3 to comply with TEX Directive (European Directive 94/9/E) requirements ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 23

TEX Spark rrester - S Series, ritical Grade EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000 End Inlet/End Outlet Side Inlet/End Outlet D E Part Number D WT Part Number E F WT F SE-04-90008952 4 14 58.50 120 SE-05-90008953 5 14 70.50 150 SE-06-90008954 6 18 72.00 210 SE-08-90008955 8 22 85.00 295 SE-10-90008956 10 26 110.00 465 SE-12-90008957 12 30 123.00 700 SE-14-90008958 14 36 137.00 900 SE-16-90008959 16 42 139.00 1425 SE-18-90008960 18 48 141.00 1725 SE-20-90008961 20 48 153.00 1820 SE-22-90008962 22 54 155.00 1920 SE-24-90008963 24 60 168.00 2500 SS-04-90008968 4 14 55.50 11 6.50 120 SS-05-90008969 5 14 68.00 11 7.00 150 SS-06-90008970 6 18 68.50 13 8.25 210 SS-08-90008971 8 22 81.50 17 9.75 295 SS-10-90008972 10 26 106.50 19 11.50 465 SS-12-90008973 12 30 120.00 20 13.25 700 SS-14-90008974 14 36 134.50 24 15.00 900 SS-16-90008975 16 42 137.00 27 16.50 1425 SS-18-90008976 18 48 138.00 33 19.00 1725 SS-20-90008977 20 48 150.00 33 20.00 1820 SS-22-90008978 22 54 151.50 36 22.00 1920 SS-24-90008979 24 60 166.50 39 23.50 2500 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 50 45 40 35 30 25 20 15 10 5 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuations urve for S Series Silencers Typical reduction = 25-32 d 316 stainless steel construction Type approval in accordance with EN1834 parts 1, 2 & 3 to comply with TEX Directive (European Directive 94/9/E) requirements ontact factory for custom fit applications Page 24

TEX Spark rrester - SH Series, Hospital Grade EN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000 End Inlet/End Outlet Side Inlet/End Outlet D E F Part Number D WT Part Number E F WT SHE-04-90008984 4.0 16 59.00 150 SHE-05-90008985 5.0 18 72.00 195 SHE-06-90008986 6.0 18 80.00 212 SHE-08-90008987 8.0 26 96.00 470 SHE-10-90008988 10.0 30 110.00 700 SHE-12-90008989 12.0 36 126.00 870 SHE-14-90008990 14.0 42 138.00 1380 SHE-16-90008991 16.0 42 163.00 1620 SHE-18-90008992 18.0 48 205.50 2920 SHE-20-90008993 20.0 60 220.00 4950 SHE-22-90008994 22.0 60 220.00 4970 SHE-24-90008995 24.0 66 244.00 6670 SHS-04-90009000 4.0 16 56.00 12 6.75 150 SHS-05-90009001 5.0 18 69.00 13 7.75 195 SHS-06-90009002 6.0 18 78.00 13 8.25 212 SHS-08-90009003 8.0 26 93.50 19 10.50 470 SHS-10-90009004 10.0 30 108.00 20 12.25 700 SHS-12-90009005 12.0 36 122.00 24 14.50 870 SHS-14-90009006 14.0 42 135.00 27 15.50 1380 SHS-16-90009007 16.0 42 159.00 27 16.50 1620 SHS-18-90009008 18.0 48 201.50 33 19.00 2920 SHS-20-90009009 20.0 60 216.00 39 21.50 4950 SHS-22-90009010 22.0 60 216.00 39 22.50 4970 SHS-24-90009011 24.0 66 241.00 42 24.00 6670 Note: 3.5-inch and smaller standard with male NPT connections; 4.0-inch and larger standard with 150 # NSI drilled plate flange connections. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. 60 TTENUTION (d) 50 40 30 20 10 Representative ttenuations urve for SH Series Silencers Typical reduction = 32-38 d 316 stainless steel construction Type approval in accordance with EN1834 parts 1, 2 & 3 to comply with TEX Directive (European Directive 94/9/E) requirements ontact factory for custom fit applications 0 63 1252 50 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Page 25

Spark rrester SU Series, Industrial Grade Dimensions in Inches/Millimeters, Weight in Pounds/Kilograms Standard Silencer pplication Exhaust spark arrestor Designed for mobile and stationary engines Recommended for hazardous environments Standard onstruction Features U.S department of griculture (Forest Service) qualified Tested by U.S. Forest Service and rated virtually 100% efficient luminized or stainless steel construction Slotted ID inlet / Stub OD outlet Protective finish applied an be mounted vertically or horizontally Optional omplete line of accessories With Mnpt/ With Slotted/ Stub onnection Stub onnection D E J G H Weight Part Number Part Number Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Pounds / Kg SU-15-980330 SU-15-981071 1.5 / 38 6.0 / 152 3.8 / 97 10.38 / 264 1.5 / 38 3.52 / 89 1.9 / 48 3/8 / 9.5 5 / 2.3 SU-02-980331 SU-02-981072 2.0 / 51 6.0 / 152 5.1 / 130 10.72 / 272 2.0 / 51 5.62 / 143 2.0 / 51 3/8 / 9.5 6 / 2.7 SU-25-980332 SU-25-981073 2.5 / 64 6.6 / 168 6.2 / 157 15.47 / 393 2.5 / 64 6.12 / 155 2.3 / 58 3/8 / 9.5 8 / 3.6 SU-03-980333 SU-03-981074 3.0 / 76 7.0 / 178 7.6 / 193 18.00 / 457 3.0 / 76 7.38 / 187 2.5 / 64 3/8 / 9.5 10 / 4.5 SU-35-980334 SU-35-981075 3.5 / 89 7.0 / 178 9.0 / 229 20.52 / 521 3.5 / 89 8.62 / 219 2.6 / 66 1/2 / 13 12 / 5.4 SU-04-980335 SU-04-981076 4.0 / 102 8.0 / 203 10.6 / 269 22.31 / 567 4.0 / 102 9.12 / 232 3.0 / 76 1/2 / 13 15 / 6.8 SU-05-980336 SU-05-981077 5.0 / 127 9.0 / 229 11.8 / 300 24.87 / 632 5.0 / 127 10.18 / 259 3.5 / 89 1/2 / 13 21 / 9.5 SU-06-980337 SU-06-981078 6.0 / 152 10.0 / 254 13.3 / 338 26.72 / 679 6.0 / 153 10.24 / 260 4.0 / 102 1/2 / 13 25 / 11.3 Page 26

Disk Silencer - DS Series - Spark rresting ritical Grade L H D NOM DRIN PLUG SPRK LENOUT M- 4H OLES ON K Part Number D H K L M WT DS-06-90012986 6 19.5 33 12 36.5 16 1.00 200 DS-08-90012987 8 26.5 47 14 50.5 20 1.00 500 DS-10-90012988 10 29.5 53 16 56.5 23 1.00 750 DS-12-90012989 12 34.0 62 18 66.5 26 1.25 1090 DS-14-90012990 14 36.0 66 24 70.5 34 1.25 1350 DS-16-90012991 16 40.0 74 26 78.5 35 1.25 1500 DS-18-90012992 18 45.5 85 28 89.5 38 1.25 1890 Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 40 35 30 25 20 15 10 5 0 63 125 250 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuations urve for DS Series Silencers Typical Reduction = 22-36 d Internal Thermal/coustic Insulation Various Inlet/Outlet onfiguration and Orientations vailable arbon Steel onstruction Stainless Steel onstruction vailable ontact Factory for ustom Fit pplications Page 27

Disk Silencer - DHS Series - Spark rresting Hospital Grade L H D NOM DRIN PLUG SPRK LENOUT M- 4H OLES ON K Part Number D H K L M WT DHS-06-90012993 6 23.0 40 12 43.5 16 1.00 370 DHS-08-90012994 8 29.5 53 14 56.5 20 1.00 600 DHS-10-90012995 10 32.5 59 16 62.5 23 1.00 925 DHS-12-90012996 12 38.5 71 20 75.5 28 1.25 1350 DHS-14-90012997 14 39.0 72 24 76.5 34 1.25 1500 DHS-16-90012998 16 41.0 76 28 80.5 37 1.25 1850 DHS-18-90012999 18 46.5 87 30 91.5 40 1.25 2150 Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. TTENUTION (d) 50 45 40 35 30 25 20 15 10 5 0 63 125 250 500 1000 2000 4000 8000 OTVE ND ENTER FREQUENY (Hz) Representative ttenuations urve for DHS Series Silencers Typical Reduction = 24-43 d Internal Thermal/coustic Insulation Various Inlet/Outlet onfiguration and Orientations vailable arbon Steel onstruction Stainless Steel onstruction vailable ontact Factory for ustom Fit pplications Page 28

ccessories Rainguards ~ Model RGF / Model RGS Rainguard Model RGF Series with NSI Flange Pattern Size Model No. Part No. Thick 4.0 RGF-04 021729 13.0 4.0.083 5.0 RGF-05 021730 14.0 4.0.083 6.0 RGF-06 021731 15.0 4.0.083 8.0 RGF-08 021732 17.5 4.0.083 10.0 RGF-10 021733 20.0 4.0.109 12.0 RGF-12 021734 23.0 4.0.109 14.0 RGF-14 021735 25.0 4.0. 109 16.0 RGF-16 021736 27.5 4.0.109 Standard Features Special flanges available Stainless steel construction available Rainguard Model RGS Series with Slip Fit I.D. onnection Size Model No. Part No. Thick 4.00 RGS-04 021737 13.0 4.0.083 4.50 RGS-45 021738 13.0 4.0.083 5.00 RGS-05 021739 14.0 4.0.083 5.56 RGS-556 021740 14.0 4.0.083 6.00 RGS-06 021741 15.0 4.0.083 6.63 RGS-663 021742 15.0 4.0.083 8.00 RGS-08 021743 17.5 4.0.083 8.63 RGS-863 021744 17.5 4.0.083 10.00 RGS-10 021745 20.0 4.0.109 10.75 RGS-1075 021746 20.0 4.0.109 12.00 RGS-12 021747 23.0 4.0.109 12.75 RGS-1275 021748 23.0 4.0.109 14.00 RGS-14 021749 25.0 4.0.109 16.00 RGS-16 021750 27.5 4.0.109 Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 29

ccessories Rain aps ~ Model RP / Model RT PIPE / TU E O.D. PIPE / TU E O.D. 1 1/2 to 6 Size 8 and Larger Standard Features Pipe size rain caps Tube size rain caps ounter balanced for automatic operation Heavy duty construction 1.5 inch to 6 inch size zinc plated 8 inch and larger with 1200 satin black finish Reduced noise style Optional Features Stainless steel construction Special design Special finish Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Pipe Rain aps - Model RP Model Part Size of No. No. Exhaust Pipe OD RP-15 000636 1 7/8 RP-02 000637 2 3/8 RP-25 000638 2 7/8 RP-03 000639 3 1/2 RP-35 000640 4 RP-04 000641 4 1/2 RP-05 000649 5 1/2 RP-06 000650 6 5/8 RP-08 000651 8 5/8 RP-10 000652 10 3/4 RP-12 000653 12 3/4 RP-14 000647 14 RP-16 000648 16 RP-18 000658 18 RP-20 000659 20 Tube Rain aps - Model RT Model Part Size of No. No. Exhaust Pipe OD RT-15 00635 1 1/2 RT-02 000636 2 RT-25 000637 2 1/2 RT-03 000638 3 RT-35 000639 3 1/2 RT-04 000640 4 RT-05 000642 5 RT-06 000643 6 RT-08 000644 8 RT-10 000645 10 RT-12 000646 12 Page 30

ccessories 90 Short Radius Tube Elbow Sizes 3 to 6 Sizes 8 to 24 DIMETER DIMETER LENGTH RDIUS LENGTH 90 Short Radius Tube Elbow Size Model No. Part No. Diameter Radius Length 3 EL-03 000660 3.0 3.5 6.0 3.5 EL-35 000661 3.5 4.0 8.0 4 EL-04 000662 4.0 4.5 8.0 5 EL-05 000663 5.0 5.50 10.0 6 EL-06 000664 6.0 6.5 10.0 8 EL-08 000665 8.0 10 EL-10 000666 10.0 12 EL-12 000667 12.0 14 EL-14 000668 14.0 16 EL-16 000669 16.0 Length = Diameter 18 EL-18 000598 18.0 20 EL-20 000599 20.0 22 EL-22 000600 22.0 24 EL-24 000601 24.0 Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 31

ccessories 90 Short Radius Tube Elbow With Flange One End Sizes 3 to 6 Sizes 8 to 24 LENGTH LENGTH RDIUS DIMETER DIMETER ustom leg lengths available upon request. 90 Short Radius Tube Elbow with Flange One End Size Model No. Part No. Diameter Radius Length 3 ELF-03 000670 3.0 3.5 6.0 3.5 ELF-35 000671 3.5 4.0 8.0 4 ELF-04 000672 4.0 4.5 8.0 5 ELF-05 000673 5.0 5.5 10.0 6 ELF-06 000674 6.0 6.5 10.0 8 ELF-08 000675 8.0 10 ELF-10 000676 10.0 12 ELF-12 000677 12.0 14 ELF-14 000678 14.0 16 ELF-16 000679 16.0 Length = Diameter 18 ELF-18 060521 18.0 20 ELF-20 060523 20.0 22 ELF-22 060525 22.0 24 ELF-24 060527 24.0 Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 32

ccessories Outlet Extension Straight Tube-NSI Flange oth Ends Outlet Extension-Straight Tube-NSI Flange oth Ends Size Model No. Part No. 4 EXT-04-12 021803 4.0 12 4.5 EXT-45-12 021804 4.5 12 5 EXT-05-15 021805 5.0 15 6 EXT-06-18 021806 6.0 18 8 EXT-08-18 021807 8.0 18 10 EXT-10-20 021808 10.0 20 12 EXT-12-24 021809 12.0 24 14 EXT-14-28 021810 14.0 28 16 EXT-16-32 021811 16.0 32 18 EXT-18-36 021812 18.0 36 20 EXT-20-40 021813 20.0 40 22 EXT-22-48 021814 22.0 48 24 EXT-24-48 021815 24.0 48 Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 33

ccessories Flanges - Model PFL 125/150# NSI Drilled Steel Welding Plate Flanges HOLES : NUMER ND SIZE Size Part I.D.- O.D.- D Hole No. of Weight Number olt enter Diameter Holes 2.0 PFL-02 2.44 6.00 4.75 0.50 0.75 4 3 2.5 PFL-25 2.94 7.00 5.50 0.50 0.75 4 4 3.0 PFL-03 3.57 7.50 6.00 0.50 0.75 4 5 3.5 PFL-35 4.07 8.50 7.00 0.50 0.75 8 6 4.0 PFL-04 4.57 9.00 7.50 0.50 0.75 8 6 5.0 PFL-05 5.66 10.00 8.50 0.50 0.88 8 7 6.0 PFL-06 6.72 11.00 9.50 0.50 0.88 8 8 8.0 PFL-08 8.72 13.50 11.75 0.50 0.88 8 11 10.0 PFL-10 10.88 16.00 14.25 0.50 1.00 12 15 12.0 PFL-12 12.88 19.00 17.00 0.50 1.00 12 22 14.0 PFL-14 14.19 21.00 18.75 0.50 1.13 12 27 16.0 PFL-16 16.19 23.50 21.25 0.50 1.13 16 31 18.0 PFL-18 18.19 25.00 22.75 0.50 1.25 16 32 20.0 PFL-20 20.19 27.50 25.00 0.50 1.25 20 38 22.0 PFL-22 22.19 29.50 27.25 0.50 1.38 20 39 24.0 PFL-24 24.19 32.00 29.50 0.50 1.38 20 40 26.0 PFL-26 26.19 34.25 31.75 0.50 1.38 24 43 28.0 PFL-28 28.19 36.50 34.00 0.50 1.38 28 49 30.0 PFL-30 30.19 38.80 36.00 0.50 1.38 28 55 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 34

ccessories Flanges - Model TFL 125/150# NSI Drilled Steel Welding Plate Flanges HOLES : NUMER ND SIZE Size Part I.D.- O.D.- D Hole No. of Weight Number olt enter Diameter Holes 2.00 TFL-02 2.06 6.00 4.75.50.75 4 4 2.50 TFL-25 2.56 7.00 5.50.50.75 4 5 3.00 TFL-03 3.06 7.50 6.00.50.75 4 5 3.50 TFL-35 3.56 8.50 7.00.50.75 8 6 4.00 TFL-04 4.06 9.00 7.50.50.75 8 7 5.00 TFL-05 5.06 10.00 8.50.50.88 8 8 6.00 TFL-06 6.06 11.00 9.50.50.88 8 9 8.00 TFL-08 8.06 13.50 11.75.50.88 8 13 10.00 TFL-10 10.06 16.00 14.25.50 1.00 12 15 12.00 TFL-12 12.06 19.00 17.00.50 1.00 12 23 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 35

ccessories Flanges - Model REFL Steel Welding Single Reducing Plate Flanges HOLES : NUMER ND SIZE Size Par I.D.- O.D.- D Hole No. of Weight Number olt enter Diameter Holes 5 X 4 REFL-05X0400 4.06 10.00 8.50.50.88 8 9 5 X 4 REFL-05X0450 4.57 10.00 8.50.50.88 8 8 6 X 5 REFL-06X0500 5.06 11.00 9.50.50.88 8 11 6 X 5 REFL-06X0563 5.63 11.00 9.50.50.88 8 10 8 X 6 REFL-08X0600 6.06 13.50 11.75.50.88 8 16 8 X 6 REFL-08X0663 6.72 13.50 11.75.50.88 8 15 10 X 8 REFL-10X0800 8.06 16.00 14.25.50 1.00 12 20 10 X 8 REFL-10X0863 8.75 16.00 14.25.50 1.00 12 19 12 X 10 REFL-12X1000 10.06 19.00 17.00.50 1.00 12 29 12 X 10 REFL-12X1075 10.88 19.00 17.00.50 1.00 12 28 14 X 12 REFL-14X1200 12.06 21.00 18.75.50 1.13 12 32 14 X 12 REFL-14X1275 12.88 21.00 18.75.50 1.12 12 31 16 X14 REFL-16X1400 14.13 23.50 21.25.50 1.12 16 37 18 X 16 REFL-18X1600 16.13 25.00 22.75.50 1.25 16 38 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 36

ccessories Flanges - Model DREFL Steel Welding Double Reducing Plate Flanges HOLES : NUMER ND SIZE Size Part I.D.- O.D.- D Hole No. of Weight Number olt enter Diameter Holes 4 X 3 DREFL-04X0300 3.06 9.00 7.50 0.50 0.75 8 8 4 X 3 DREFL-04X0350 3.57 9.00 7.50 0.50 0.75 8 7 6 X 4 DREFL-06X0400 4.06 11.00 9.50 0.50 0.88 8 12 6 X 4 DREFL-06X0450 4.57 11.00 9.50 0.50 0.88 8 11 8 X 5 DREFL-08X0500 5.06 13.50 11.75 0.50 0.88 8 17 8 X 5 DREFL-08X0563 5.63 13.50 11.75 0.50 0.88 8 16 10 X 6 DREFL-10X0600 6.06 16.00 14.25 0.50 1.00 12 27 10 X 6 DREFL-10X0663 6.72 16.00 14.25 0.50 1.00 12 26 12 X 8 DREFL-12X0800 8.06 19.00 17.00 0.50 1.00 12 32 12 X 8 DREFL-12X0863 8.75 19.00 17.00 0.50 1.00 12 30 14 X 10 DREFL-14X1000 10.06 21.00 18.75 0.50 1.13 12 36 14 X 10 DREFL-14X1075 10.88 21.00 18.75 0.50 1.13 12 34 16 X 12 DREFL-16X1200 12.06 23.50 21.25 0.50 1.13 16 41 16 X 12 DREFL-16X1275 12.88 23.50 21.25 0.50 1.13 16 39 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 37

ccessories Flanges - Model FLT ast Iron Screwed Flanges HOLES : NUMER ND SIZE NOM. PIPE SIZE O.D...D. D1 D2 Size Part O.D.- D-1 D-2 Thickness Hole No. of Weight Number olt enter Thickness Through Hole Diameter Holes 2.0 FLT-02 6.00 4.75.62 1.00.75 4 4 2.5 FLT-25 7.00 5.50.69 1.12.75 4 6 3.0 FLT-03 7.50 6.00.75 1.19.75 4 8 4.0 FLT-04 9.00 7.50.94 1.31.75 8 12 5.0 FLT-05 10.00 8.50.94 1.44.88 8 14 6.0 FLT-06 11.00 9.50 1.00 1.56.88 8 16 8.0 FLT-08 13.50 11.75 1.12 1.75.88 8 28 10.0 FLT-10 16.00 14.25 1.19 1.94 1.00 12 38 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 38

ccessories Special Flanges - aterpillar - Model FL HOLES : NUMER ND SIZE HOLES : NUMER ND SIZE D Style 1 Style 2 Size Part Style I.D.- O.D.- D Hole No. Weight Number Number olt enter Diameter Holes 4.0 FL-04 1 4.06 5.50 4.13 0.50 0.56 4 3 5.0 FL-05 1 5.06 6.50 5.00 0.50 0.66 4 3 5.0 FL-05R 2 5.06 7.72 6.86 0.50 0.41 8 4 6.0 FL-06 1 6.06 7.75 6.00 0.50 0.78 4 5 8.0 FL-08 2 8.13 11.00 9.88 0.50 0.56 8 6 10.0 FL-10 2 10.13 13.50 12.44 0.50 0.50 12 9 12.0 FL-12 2 12.06 16.00 14.80 0.50 0.56 12 7 14.0 FL-14 2 14.06 18.00 17.00 0.50 0.56 12 15 16.0 FL-16 2 16.10 23.50 21.25 0.50 0.81 16 31 18.0 FL-18 2 18.13 22.50 20.88 0.50 0.63 16 19 * Flange kits available. Kits include: (1) flange, (1) gasket, bolts and nuts. See Price List/ccessories/Flange Kits Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions. Page 39