Tie Rod & Welded Cylinders. Buyers. Guide Fluid Power Products

Tie Rod & Welded Cylinders Buyers Guide Fluid Power Products

Providing value engineered hydraulic solutions for todays demanding needs

Table of Contents 30 Month Warranty............................................... 4 2500 TL Series Cylinders........................................... 5 3000 TH Series Cylinders.......................................... 8 3000 TP Rephasing Series........................................ 10 Hydraulic Stroke Control......................................... 11 Dimensional Data Chart (TL, TH, TP)................................ 12 Cylinder Sizing/Selection Information.............................. 13 WH Series Welded Cylinders...................................... 14 WX Series Welded Cylinders...................................... 16 Cylinder Accessories............................................ 18 Cylinder Repair Kits............................................. 19 Customer Service LION HYDRAULICS 51 Burmac Road, P.O. Box 429, Winnipeg Manitoba, Canada R3C 3E4 Toll-Free: 1-800-665-0247 Phone: (204) 786-7921 Fax: (204) 889-9120 Fax Orders: (204) 772-9496 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

TheFair Exchange! 4 Guaranteed 30 Months * Lion Hydraulic Cylinders are built tough enough to stand up to the roughest conditions - Tough enough that we now confidently offer this iron clad guarantee on every Lion Hydraulic Cylinder that we sell. Should any Lion Hydraulic Cylinder fail due to quality of workmanship or materials within 30 months from the date of purchase, we will give you a new one absolutely free of charge. * Bent, broken and rusted rods are not warrantable under this program.

30 Month Fair Exchange Warranty TL SERIES 2500 PSI Continuous Working Pressure 5000 PSI Proof Pressure 1 2 3 5 10 12 13 14 11 4 6 7 8 9 11 1 Pins & Retainers - High tensile steel, zinc plated to prevent corrosion, comes with hair pin retainers. 2 Ports - Double ported NPTF for greater flexibility of assembly. Cylinders assembled with ports inline. 3 Piston Nut - Heavy duty, torqued, self locking piston nut holds piston in place under high cycle loading. 4 Piston - Ductile iron, precision machined providing a malleable bearing surface for extended cylinder life. 5 Piston Seal - 90 durometer o- ring with anti-extrusion backup washers provide positive sealing under high load conditions. 6 Tie-Rods - High tensile steel to prevent failure under high pressure. 7 Cylinder Shaft - 1045 high strength steel, hard chrome plated shaft provides extended cylinder life in harsh applications. 8 Tube - Precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life. 9 Tube Seal - 90 durometer o- ring with anti-extrusion backup washer to prevent leakage under high pressure and cycle loading. 10 Rod Seal - Polyurethane U- Cup providing long wearing, positive seal. 11 Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. 12 Rod Wiper - Heavy duty metal encased Nitrile, preventing contaminants from entering cylinder. 13 Threaded Shaft (on ASAE cylinders) - To accept optional mechanical stroke control, on 8 stroke ASAE cylinders only. NOTE: Not applicable to 5 bore cylinders. 14 Rod Clevis - Ductile iron comes with 360 thread contact area and positive set screw locking device able to withstand continuous high load without wear or fracture. 5 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

TL SERIES ASAE - All Lion Hydraulic TL cylinders meet ASAE (American Society of Agricultural Engineers) specifications. These specifications establish common mounting i.e. (pin to pin dimensions) and clearance dimensions i.e. (clevis cap/rod clevis throat width and pin diameters) for cylinders and trailingtype agricultural implements. This criteria is only applicable to 8 and 16 stroke cylinders. Note: All ASAE 2 through 4 bore cylinders with 8 stroke are designed with 20 1/4" retracted length to provide 2" additional threaded rod to accommodate a stroke control per ASAE Specifications. NON ASAE - All Lion Hydraulics TL NON ASAE cylinders are designed per ASAE dimensional requirements, however do not include the additional 2" threaded rod length. Pin to pin dimensions are noted below. *Cylinder Column Load: Column strength loading affects all long stroke cylinders. Affected cylinders should not be operated beyond these limits as the cylinder rod may buckle or bend causing failure. Pressure/load limitation applies to compressive (push) loading only. Applications that fall outside the noted parameters, contact Lion Hydraulics directly for further assistance. ASAE - TL Cylinder Ordering Information - TL Series: ASAE & Non ASAE Bore Stroke Rod Max. Rated PSI & Column Order Pin to Pin Center Ship Model Pin Dia. Load on Full Extension Dia. No. Wt lbs. Retracted Extended PSI lbs. 2.0" 8.00 1.13 639287 20TL08-112 ASAE 20 1/4 28 1/4 20 1 Full PSI 7854 2.5" 8.00 1.13 639288 25TL08-112 ASAE 20 1/4 28 1/4 22 1 Full PSI 12272 3.0" 8.00 1.25 639289 30TL08-125 ASAE 20 1/4 28 1/4 28 1 Full PSI 17672 3.5" 8.00 1.25 639290 35TL08-125 ASAE 20 1/4 28 1/4 36 1 Full PSI 24053 4.0" 8.00 1.25 639291 40TL08-125 ASAE 20 1/4 28 1/4 43 1 Full PSI 31416 5.0" 8.00 1.50 639293 50TL08-150 ASAE 20 1/4 28 1/4 71 1 Full PSI 49088 3.0" 16.00 1.50 639225 30TL16-150 ASAE 31 1/2 47 1/2 41 1 1/4 Full PSI 17672 3.5" 16.00 1.50 639226 35TL16-150 ASAE 31 1/2 47 1/2 51 1 1/4 Full PSI 24053 4.0" 16.00 1.75 639227 40TL16-175 ASAE 31 1/2 47 1/2 59 1 1/4 Full PSI 31416 5.0" 16.00 2.00 639228 50TL16-200 ASAE 31 1/2 47 1/2 100 1 1/4 Full PSI 49088 6 Bore Stroke Rod Max. Rated PSI & Column Order Pin to Pin Center Ship Model Pin Dia. Load on Full Extension Dia. No. Wt lbs. Retracted Extended PSI lbs. 4.00 1.13 639139 20TL04-112 14 1/4 18 1/4 17 1 Full PSI 7854 6.00 1.13 639140 20TL06-112 16 1/4 22 1/4 18 1 Full PSI 7854 8.00 1.13 639141 20TL08-112 18 1/4 26 1/4 19 1 Full PSI 7854 10.00 1.13 639142 20TL10-112 20 1/4 30 1/4 21 1 Full PSI 7854 12.00 1.13 639143 20TL12-112 22 1/4 34 1/4 22 1 Full PSI 7854 14.00 1.13 639144 20TL14-112 24 1/4 38 1/4 24 1 Full PSI 7854 2.0" 16.00 1.13 639145 20TL16-112 26 1/4 42 1/4 25 1 Full PSI 7854 18.00 1.13 639146 20TL18-112 28 1/4 46 1/4 26 1 Full PSI 7854 20.00 1.13 639147 20TL20-112 30 1/4 50 1/4 28 1 Full PSI 7854 24.00 1.13 639148 20TL24-112 34 1/4 58 1/4 30 1 *2180 6850 30.00 1.13 639151 20TL30-112 40 1/4 70 1/4 34 1 *1500 4700 36.00 1.13 639152 20TL36-112 46 1/4 82 1/4 38 1 *1090 3430 4.00 1.13 639154 25TL04-112 14 1/4 18 1/4 18 1 Full PSI 12272 6.00 1.13 639155 25TL06-112 16 1/4 22 1/4 20 1 Full PSI 12272 8.00 1.13 639156 25TL08-112 18 1/4 26 1/4 21 1 Full PSI 12272 10.00 1.13 639157 25TL10-112 20 1/4 30 1/4 23 1 Full PSI 12272 12.00 1.13 639158 25TL12-112 22 1/4 34 1/4 24 1 Full PSI 12272 14.00 1.13 639159 25TL14-112 24 1/4 38 1/4 26 1 Full PSI 12272 2.5" 16.00 1.13 639160 25TL16-112 26 1/4 42 1/4 28 1 Full PSI 12272 18.00 1.25 639161 25TL18-125 28 1/4 46 1/4 31 1 Full PSI 12272 20.00 1.25 639162 25TL20-125 30 1/4 50 1/4 32 1 Full PSI 12272 24.00 1.25 639163 25TL24-125 34 1/4 58 1/4 35 1 *2125 10435 30.00 1.25 639165 25TL30-125 40 1/4 70 1/4 40 1 *1460 7175 36.00 1.25 639166 25TL36-125 46 1/4 82 1/4 45 1 *1065 5235 NOTE: * Indicates cylinder strength is affected, see notes above for details. NON ASAE - TL

MODEL NO. EXAMPLE 20 TL 08-112 Rod Diameter (inches) x 100 Stroke (inches) Bore (inches) x 10 TL 2500 PSI TH 3000 PSI TP 3000 PSI Rephasing TL SERIES NON ASAE - TL Bore Stroke Rod Dia. 3.0" 3.5" 4.0" 5.0" Order No. Model Pin to Pin Center Max. Rated PSI & Column Retracted x Ship Wt Pin Dia. Load on Full Extension Extended lbs. Retracted Extended PSI lbs. 4.00 1.25 639168 30TL04-125 14 1/4 18 1/4 23 1 Full PSI 17672 6.00 1.25 639169 30TL06-125 16 1/4 22 1/4 25 1 Full PSI 17672 8.00 1.25 639170 30TL08-125 18 1/4 26 1/4 27 1 Full PSI 17672 10.00 1.25 639171 30TL10-125 20 1/4 30 1/4 30 1 Full PSI 17672 12.00 1.25 639172 30TL12-125 22 1/4 34 1/4 32 1 Full PSI 17672 14.00 1.25 639173 30TL14-125 24 1/4 38 1/4 34 1 Full PSI 17672 16.00 1.25 639174 30TL16-125 26 1/4 42 1/4 36 1 Full PSI 17672 18.00 1.25 639175 30TL18-125 28 1/4 46 1/4 39 1 *2340 16560 20.00 1.50 639176 30TL20-150 30 1/4 50 1/4 41 1 *1985 14025 24.00 1.50 639177 30TL24-150 34 1/4 58 1/4 48 1 Full PSI 17672 30.00 1.50 639179 30TL30-150 40 1/4 70 1/4 55 1 *2105 14880 36.00 1.50 639180 30TL36-150 46 1/4 82 1/4 62 1 *1535 10855 4.00 1.25 639182 35TL04-125 14 1/4 18 1/4 30 1 Full PSI 24053 6.00 1.25 639183 35TL06-125 16 1/4 22 1/4 33 1 Full PSI 24053 8.00 1.25 639184 35TL08-125 18 1/4 26 1/4 35 1 Full PSI 24053 10.00 1.25 639185 35TL10-125 20 1/4 30 1/4 38 1 Full PSI 24053 12.00 1.25 639186 35TL12-125 22 1/4 34 1/4 41 1 Full PSI 24053 14.00 1.25 639187 35TL14-125 24 1/4 38 1/4 43 1 Full PSI 24053 16.00 1.25 639188 35TL16-125 26 1/4 42 1/4 46 1 *2060 19840 18.00 1.25 639189 35TL18-125 28 1/4 46 1/4 51 1 Full PSI 24053 20.00 1.25 639190 35TL20-125 30 1/4 50 1/4 54 1 Full PSI 24053 24.00 1.50 639191 35TL24-150 34 1/4 58 1/4 59 1 *2250 21645 30.00 1.50 639193 35TL30-150 34 1/4 58 1/4 67 1 *1545 14880 36.00 1.50 639194 35TL36-150 34 1/4 58 1/4 75 1 *1125 10850 4.00 1.25 639196 40TL04-125 34 1/4 58 1/4 37 1 Full PSI 31416 6.00 1.25 639197 40TL06-125 34 1/4 58 1/4 39 1 Full PSI 31416 8.00 1.25 639198 40TL08-125 34 1/4 58 1/4 42 1 Full PSI 31416 10.00 1.25 639199 40TL10-125 34 1/4 58 1/4 45 1 Full PSI 31416 12.00 1.25 639201 40TL12-125 34 1/4 58 1/4 48 1 *2400 30195 14.00 1.25 639202 40TL14-125 34 1/4 58 1/4 50 1 *1925 24210 16.00 1.25 639203 40TL16-125 26 1/4 42 1/4 53 1 *1580 19840 18.00 1.25 639204 40TL18-125 28 1/4 46 1/4 59 1 Full PSI 31416 20.00 1.50 639205 40TL20-150 30 1/4 50 1/4 62 1 *2315 29085 24.00 1.50 639206 40TL24-150 34 1/4 58 1/4 68 1 *1720 21645 24.00 1.75 639207 40TL24-175 34 1/4 58 1/4 74 1 Full PSI 31416 30.00 2.00 639208 40TL30-200 40 1/4 70 1/4 91 1 Full PSI 31416 36.00 2.00 639209 40TL36-200 46 1/4 82 1/4 102 1 Full PSI 31416 48.00 2.00 639210 40TL48-200 58 1/4 106 1/4 125 1 *1635 20560 10.00 1.50 639214 50TL10-150 22 1/4 32 1/4 75 1 Full PSI 49088 12.00 2.00 639215 50TL12-200 24 1/4 36 1/4 87 1 Full PSI 49088 14.00 2.00 639216 50TL14-200 26 1/4 40 1/4 92 1 Full PSI 49088 16.00 2.00 639217 50TL16-200 28 1/4 44 1/4 96 1 Full PSI 49088 18.00 2.00 639218 50TL18-200 30 1/4 48 1/4 101 1 Full PSI 49088 20.00 2.00 639219 50TL20-200 32 1/4 52 1/4 106 1 Full PSI 49088 24.00 2.00 639220 50TL24-200 36 1/4 60 1/4 116 1 Full PSI 49088 30.00 2.00 639222 50TL30-200 42 1/4 72 1/4 131 1 *2265 44470 36.00 2.00 639223 50TL36-200 48 1/4 84 1/4 145 1 *1665 32700 NOTE: * Indicates cylinder strength is affected, see page 6 for details. 7 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

30 Month Fair Exchange Warranty TH SERIES 3000 PSI Continuous Working Pressure 6000 PSI Proof Pressure 1 2 4 5 6 11 13 14 15 12 3 7 8 9 10 12 8 1 Pins & Retainers - High tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers. 2 Ports - Double ported ORB for greater flexibility of assembly and positive sealing. Unless otherwise stated, cylinders assembled with ports inline. 3 Piston Nut - Heavy duty, torqued, self locking piston nut holds piston in place under high cycle loading. 4 Piston Wear Ring - 33% glass filled nylon wear ring incorporated in piston to provide side load bearing area, preventing scoring of cylinder tube. 5 Piston - Ductile iron, precision machined providing a malleable bearing surface for extended cylinder life. 6 Piston Seal - 15% fibre glass filled teflon piston seal comes with o-ring expander provides a positive piston seal with minimal friction, extending seal operation under high pressure applications. 7 Tie-Rods - High tensile steel to prevent failure under high pressure. 8 Cylinder Shaft - 1045 high strength steel, hard chrome plated shaft provides extended cylinder life in harsh applications. 9 Tube - Precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life. 10 Tube Seal - 90 durometer o-ring with anti-extrusion back-up washer to prevent leakage under high pressure and cycle loading. 11 Rod Seal - Polyurethane U-Cup providing long wearing, positive seal. 12 Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. 13 Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder. 14 Threaded Shaft (on ASAE cylinders) - To accept optional mechanical stroke control NOTE: Not applicable to ASAE 5" bore cylinders. 15 Rod Clevis - Ductile iron comes with 360 thread contact area and positive set screws locking device able to withstand continuous high loads without wear or fracture.

ASAE - TH Cylinder Ordering Information - TH Series: ASAE & Non ASAE Bore Stroke Rod Ship Max. Rated PSI & Column Order Pin to Pin Center Pin Model Wt Load on Full Extension Dia. No. Dia. Extended lbs. PSI lbs. 2.0" 8.00 1.13 639280 20TH08-112 ASAE 20 1/4 28 1/4 20 1 Full PSI 9425 2.5" 8.00 1.13 639281 25TH08-112 ASAE 20 1/4 28 1/4 22 1 Full PSI 14726 3.0" 8.00 1.25 639282 30TH08-125 ASAE 20 1/4 28 1/4 28 1 Full PSI 21206 3.5" 8.00 1.25 639283 35TH08-125 ASAE 20 1/4 28 1/4 36 1 Full PSI 28863 4.0" 8.00 1.37 639284 40TH08-137 ASAE 20 1/4 28 1/4 44 1 Full PSI 37699 5.0" 8.00 2.00 639286 50TH08-200 ASAE 20 1/4 28 1/4 78 1 1/4 Full PSI 58905 3.0" 16.00 1.50 639699 30TH16-150 ASAE 31 1/2 47 1/2 41 1 1/4 Full PSI 21206 3.5" 16.00 1.50 639700 35TH16-150 ASAE 31 1/2 47 1/2 51 1 1/4 Full PSI 28863 4.0" 16.00 1.75 639701 40TH16-175 ASAE 31 1/2 47 1/2 64 1 1/4 Full PSI 37699 5.0" 16.00 2.00 639702 50TH16-200 ASAE 31 1/2 47 1/2 100 1 1/4 Full PSI 58905 Note: All 2" through 4" bore cylinders with 8" stroke are designed with rod threaded to accommodate a stroke control collar per ASAE specifications. (See page 6 definition) Bore Stroke Rod Max. Rated PSI & Column Order Pin to Pin Center Ship Wt Pin Model Load on Full Extension Dia. No. lbs. Dia. Retracted Extended PSI lbs. 8.00 1.13 639617 20TH08-112 18 1/4 26 1/4 19 1 Full PSI 9425 10.00 1.13 639618 20TH10-112 20 1/4 30 1/4 21 1 Full PSI 9425 12.00 1.13 639619 20TH12-112 22 1/4 34 1/4 22 1 Full PSI 9425 2.0" 14.00 1.13 639620 20TH14-112 24 1/4 38 1/4 24 1 Full PSI 9425 16.00 1.13 639621 20TH16-112 26 1/4 42 1/4 25 1 Full PSI 9425 18.00 1.13 639622 20TH18-112 28 1/4 46 1/4 26 1 Full PSI 9425 20.00 1.13 639623 20TH20-112 30 1/4 50 1/4 28 1 *2930 9205 24.00 1.13 639624 20TH24-112 34 1/4 58 1/4 30 1 *2180 6850 8.00 1.13 639631 25TH08-112 18 1/4 26 1/4 21 1 Full PSI 14726 10.00 1.13 639632 25TH10-112 20 1/4 30 1/4 23 1 Full PSI 14726 12.00 1.13 639633 25TH12-112 22 1/4 34 1/4 24 1 Full PSI 14726 2.5" 14.00 1.13 639634 25TH14-112 24 1/4 38 1/4 26 1 Full PSI 14726 16.00 1.25 639635 25TH16-125 26 1/4 42 1/4 29 1 Full PSI 14726 18.00 1.25 639636 25TH18-125 28 1/4 46 1/4 31 1 Full PSI 14726 20.00 1.25 639637 25TH20-125 30 1/4 50 1/4 32 1 *2855 14025 24.00 1.25 639638 25TH24-125 34 1/4 58 1/4 35 1 *2125 10435 8.00 1.25 639645 30TH08-125 18 1/4 26 1/4 27 1 Full PSI 21206 10.00 1.25 639646 30TH10-125 20 1/4 30 1/4 30 1 Full PSI 21206 12.00 1.25 639647 30TH12-125 22 1/4 34 1/4 32 1 Full PSI 21206 3.0" 14.00 1.25 639648 30TH14-125 24 1/4 38 1/4 35 1 Full PSI 21206 16.00 1.50 639649 30TH16-150 26 1/4 42 1/4 39 1 Full PSI 21206 18.00 1.50 639650 30TH18-150 28 1/4 46 1/4 41 1 Full PSI 21206 20.00 1.50 639651 30TH20-150 30 1/4 50 1/4 43 1 Full PSI 21206 24.00 1.50 639652 30TH24-150 34 1/4 58 1/4 48 1 Full PSI 21206 8.00 1.25 639659 35TH08-125 18 1/4 26 1/4 35 1 Full PSI 28863 10.00 1.25 639660 35TH10-125 20 1/4 30 1/4 38 1 Full PSI 28863 12.00 1.25 639661 35TH12-125 22 1/4 34 1/4 41 1 Full PSI 28863 3.5" 14.00 1.25 639662 35TH14-125 24 1/4 38 1/4 43 1 Full PSI 28863 16.00 1.50 639663 35TH16-150 26 1/4 42 1/4 48 1 Full PSI 28863 18.00 1.50 639664 35TH18-150 28 1/4 46 1/4 51 1 Full PSI 28863 20.00 1.50 639665 35TH20-150 30 1/4 50 1/4 54 1 Full PSI 28863 24.00 1.50 639666 35TH24-150 34 1/4 58 1/4 59 1 *2250 21645 8.00 1.37 639673 40TH08-137 18 1/4 26 1/4 43 1 Full PSI 37699 10.00 1.37 639674 40TH10-137 20 1/4 30 1/4 46 1 Full PSI 37699 12.00 1.37 639675 40TH12-137 22 1/4 34 1/4 48 1 Full PSI 37699 4.0" 14.00 1.37 639676 40TH14-137 24 1/4 38 1/4 52 1 Full PSI 37699 16.00 1.75 639677 40TH16-175 26 1/4 42 1/4 61 1 Full PSI 37699 18.00 1.75 639678 40TH18-175 28 1/4 46 1/4 64 1 Full PSI 37699 20.00 1.75 639679 40TH20-175 30 1/4 50 1/4 67 1 Full PSI 37699 24.00 1.75 639680 40TH24-175 34 1/4 58 1/4 74 1 Full PSI 37699 10.00 2.00 639688 50TH10-200 22 1/4 32 1/4 78 1 1/4 Full PSI 58905 12.00 2.00 639689 50TH12-200 24 1/4 36 1/4 88 1 1/4 Full PSI 58905 14.00 2.00 639690 50TH14-200 26 1/4 40 1/4 93 1 1/4 Full PSI 58905 5.0" 16.00 2.00 639691 50TH16-200 28 1/4 44 1/4 97 1 1/4 Full PSI 58905 18.00 2.00 639692 50TH18-200 30 1/4 48 1/4 102 1 1/4 Full PSI 58905 20.00 2.00 639693 50TH20-200 32 1/4 52 1/4 107 1 1/4 Full PSI 58905 24.00 2.00 639694 50TH24-200 36 1/4 60 1/4 117 1 1/4 Full PSI 58905 NOTE: * Indicates cylinder strength is affected, see page 6 for details. NON ASAE - TH 9 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

TP REPHASING SERIES 30 Month Fair Exchange Warranty 3000 PSI Continuous Working Pressure 6000 PSI Proof Pressure 1 1 2 3 10 4 2 3 4 5 6 7 8 9 11 12 13 14 15 16 10 1 Pins & Retainers - High tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers. 2 Ports - Double ported ORB for greater flexibility of assembly and positive sealing.cylinders assembled with ports inline. 3 Piston Nut - Heavy duty, torqued, self locking piston nut holds piston in place under high cycle loading. 4 Piston Wear Ring - 33% glass filled nylon wear ring incorporated in piston to provide side load bearing area, preventing scoring of cylinder tube. 5 Piston - Ductile iron, precision machined providing a malleable bearing surface for extended cylinder life. 6 Piston Seal - 15% fibre glass filled teflon piston seal comes with o- ring expander provides a positive piston seal with minimal friction, extending seal operation under high pressure applications. 7 Tie-Rods - High tensile steel with rolled threads to prevent failure under high pressure. 8 Cylinder Shaft - 1045 high strength steel, hard chrome plated shaft provides extended cylinder life in harsh applications. 9 Tube - Precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life. 10 Bypass Port - Precision machined and finished bypass port to ensure positive rephasing of cylinders with minimal settleback and consistent rephasing flow. 11 Tube Seal - 90 durometer o-ring with anti-extrusion back-up washer to prevent leakage under high pressure and cycle loading. 12 Rod Seal - Polyurethane U-Cup providing long wearing, positive seal. 13 Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. 14 Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder. 15 Threaded Shaft (on ASAE cylinders) To accept optional mechanical stroke control. NOTE: Not applicable to ASAE 5" bore cylinders. 16 Rod Clevis - Ductile iron comes with 360 thread contact area and positive set screws locking device able to withstand continuous high loads without wear or fracture. NOTE: Hydraulic Stroke Control Assembly assembled to rephasing cylinder for pictorial purposes only, it is available separately, see page 11 for order numbers. HYDRAULIC STROKE CONTROL ASSEMBLY 1 Valve Body - Precision machined with flexible 3/4-16 coupler for ease of assembly, to base end port of cylinder body. 2 Spool Valve - Stainless steel to eliminate corrosion, "nylatron" piston for extended life. 3 Push Rod - Provides positive actuation of spool valve and eliminates the need for additional hydraulic tubing and fittings. (NOTE: Push rod length is proportional to cylinder stroke). 4 Actuator - Ductile iron, allowing for infinite control of cylinder stroke by adjusting actuator position on shaft. Aluminum bushing prevents damage to cylinder shaft.

TP REPHASING SERIES REPHASING CYLINDER SYSTEMS (TP SERIES) Synchronized operation of two produces, equal, simultaneous, or more hydraulic cylinders in actuation of each cylinder in the unbalanced load conditions can system. As the volumes of each be attained by plumbing volumetrically cylinder cannot economically, be matched cylinders (see identically matched, a bypass port specific cylinder bore and shaft is provided that upon full extension diameters on accompanying TP (or retraction) a metered amount Series chart) adjacent to each of fluid bypasses the piston seal to other where the displaced fluid the next adjacent cylinder in the ASAE REPHASING CYLINDERS system. This indexes all cylinders of the system to the sames position, then upon retraction (extension) positive sealing is engaged and sychronized operation continues (to ensure optimum performance all entrapped air must be purged from these rephasing cylinder systems). Bore Stroke Max. Rated PSI & Column Rod Pin to Pin Center Ship Wt Pin Order No. Model Load on Full Extension Dia. lbs. Dia. Retracted Extemded PSI lbs. 2.5" 8.00 1.13 639703 25TP08-112 20 1/4 28 1/4 22 1 Full PSI 14726 2.7" 8.00 1.13 639704 27TP08-112 20 1/4 28 1/4 25 1 Full PSI 17819 3.0" 8.00 1.25 639705 30TP08-125 20 1/4 28 1/4 28 1 Full PSI 21206 3.2" 8.00 1.25 639706 32TP08-125 20 1/4 28 1/4 32 1 Full PSI 24887 3.5" 8.00 1.25 639707 35TP08-125 20 1/4 28 1/4 36 1 Full PSI 28863 3.7" 8.00 1.37 639708 37TP08-137 20 1/4 28 1/4 42 1 Full PSI 33134 4.0" 8.00 1.37 639709 40TP08-137 20 1/4 28 1/4 44 1 Full PSI 37699 4.2" 8.00 1.50 639710 42TP08-150 20 1/4 28 1/4 50 1 Full PSI 42559 4.5" 8.00 1.50 639711 45TP08-150 20 1/4 28 1/4 52 1 Full PSI 47713 4.7" 8.00 1.50 639712 47TP08-150 20 1/4 28 1/4 70 1 Full PSI 53162 5.0" 8.00 1.50 639713 50TP08-150 20 1/4 28 1/4 72 1 Full PSI 58905 Note: All 2 1/2" through 4 1/2" bore cylinders with 8" stroke are designed with the rod threaded to accomodate a stroke control collar per ASAE specifications. (See page 6 definition) *1 Maximum rated PSI on retraction 2805 PSI *2 Maximum rated PSI on retraction 2505 PSI *1 *2 11 HYDRAULIC STROKE CONTROL (APPLICABLE TO TP & TH SERIES) A Hydraulic Stroke Control Asembly When used in conjunction with mounted on a TP or TH Series the master cylinder of a rephasing system, it provides consistent cylinder can provide an infinitely variable stroke adjustment for that positive stroke control of the entire cylinder. system. HYDRAULIC STROKE CONTROL ASSEMBLY Note: The hydraulic stroke control assembly is designed to mount on 8" stroke ASAE cylinders. Additional modification to push rod length is required for mounting on all other cylinder sizes. Model No. Order No. Rod DIa. Ship Wt lbs. Used on HSC-2730 637290 1 1/8-1 1/4 3.0 2.75" - 3.00" Bore Series HSC-3235 637291 1 1/4 3.0 3.25" - 3.50" Bore Series HSC-3740 637292 1 3/8 3.5 3.75" - 4.00" Bore Series HSC-4245 637293 1 1/2 4.0 4.25" - 4.50" Bore Series HSC-4750 637294 1 1/2 4.0 4.75" - 5.00" Bore Series Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

/ TL, TH, TP Cylinders DIMENSIONAL DATA 12 DIMENSIONS FOR 2500 PSI (TL); 3000 PSI (TH); REPHASING (TP); DIMENSIONS IN INCHES Bore 2.00" 2.50" 2.75" 3.00" 3.25" 3.50" 3.75" 4.00" 4.25" 4.50" 4.75" 5.00" A 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 12 1/4 12 1/4 B 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 B 1 4 3/16 4 3/16 3 15/16 3 15/16 3 15/16 3 15/16 3 7/8 3 7/8 3 7/8 3 7/8 4 11/16 4 11/16 C 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/4 2 1/4 D 2 7/8 2 7/8 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 7/8 2 7/8 E 2 3/4 3 1/8 3 3/4 3 3/4 4 1/2 4 1/2 5 1/8 5 1/8 5 1/4 5 1/4 6 6 F 1 3/8 1 9/16 1 7/8 1 7/8 2 1/4 2 1/4 2 9/16 2 9/16 2 5/8 2 5/8 3 3 G 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 3/16 1 3/16 1 3/16 1 3/16 G 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 5/16 1 5/16 H 2 1/2 2 1/2 2 1/2 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 3 3 3 3 H 1 2 3/8 2 1/2 2 9/16 2 9/16 2 9/16 2 9/16 2 5/8 2 5/8 3 3 3 1/2 3 1/2 J 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 5/16 1 5/16 1 5/16 1 5/16 J 1 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 7/16 1 7/16 K Tl 1 1/64 1 1/64 N/A 1 1/64 N/A 1 1/64 N/A 1 1/64 N/A 1 1/64 N/A 1 1/64 K TH 1 1/64 1 1/64 N/A 1 1/64 N/A 1 1/64 N/A 1 1/64 N/A N/A N/A 1 17/64 K TP 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 M 1 1/8-1 1/8-1 1/8-1 1/4-1 1/4-1 1/4-1 1/4-1 1/4-1 1/2-1 1/2-1 1/2-1 1/2-12 12 12 12 12 12 12 12 12 12 12 12 P Tl 3/8 3/8 N/A 1/2 N/A 1/2 N/A 1/2 N/A 1/2 N/A 1/2 P TH 3/4-16 3/4-16 N/A 3/4-16 N/A 3/4-16 N/A 3/4-16 N/A 3/4-16 N/A 3/4-16 P TP 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 T 3/8 3/8 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 ASAE CYLINDERS A 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4 ASAE-8 A ASAE-16 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 B 1 ASAE-8 B 1 ASAE-16 K ASAE-8 K ASAE-16 6 3/16 6 3/16 5 15/16 5 15/16 5 15/16 5 15/16 5 7/8 5 7/8 5 5/8 5 5/8 4 11/16 4 11/16 9 7/16 9 7/16 9 3/16 9 3/16 9 3/16 9 3/16 9 1/8 9 1/8 8 7/8 8 7/8 7 15/16 7 15/16 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 1/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 1 17/64 Note: Rod Clevis Threads are UNF -- Note: P Tl = NPTF Ports - P TH = 3/4-16 UNF ORB Ports - P TP = 3/4-16 UNF ORB Ports

/ FORCE EXERTED BY HYDRAULIC CYLINDERS Maximum force in pounds generated at given bores and pressures. Pull force for a given bore size varies depending on the rod diameter. NOTE: Column load limitations and maximum operating pressures are not considered in this table. Please refer to cylinder specifications and column load information on page 6. Piston Pump Pressure PSI Bore Rod Dia. 500 1000 1500 2000 2500 3000 inches Push Pull Push Pull Push Pull Push Pull Push Pull Push Pull 2.00" 1.13 1571 1074 3142 2148 4712 3221 6283 4295 7854 5369 9425 6443 2.50" 1.13 2454 1957 4909 3915 7363 5872 9818 7829 12272 9787 14726 11744 1.25 2454 1841 4909 3682 7363 5522 9818 7363 12272 9204 14726 11045 2.75" 1.13 2970 2473 5940 4946 8909 7418 11879 9891 14849 12364 17819 14837 3.00" 1.25 3534 2921 7069 5841 10603 8762 14137 11683 17672 14604 21206 17524 1.50 3534 2651 7069 5301 10603 7952 14137 10603 17672 13254 21206 15904 3.25" 1.25 4148 3534 8296 7069 12444 10603 16592 14137 20739 17672 24887 21206 3.50" 1.25 4811 4197 9621 8394 14432 12591 19242 16788 24053 20985 28863 25182 1.50 4811 3927 9621 7854 14432 11781 19242 15708 24053 19635 28863 23562 3.75" 1.38 5522 4780 11045 9560 16567 14340 22089 19120 27612 23899 33134 28679 1.25 6283 5670 12566 11339 18850 17009 25133 22678 31416 28348 37699 34018 1.38 6283 5541 12566 11082 18850 16622 25133 22163 31416 27704 37699 33245 4.00" 1.50 6283 5400 12566 10799 18850 16199 25133 21599 31416 26998 37699 32398 1.75 6283 5081 12566 10161 18850 15242 25133 20322 31416 25403 37699 30483 2.00 6283 4712 12566 9425 18850 14137 25133 18850 31416 23562 37699 28274 4.25" 1.50 7093 6210 14186 12419 21279 18629 28373 24838 35466 21048 42559 37257 4.50" 1.50 7952 7069 15904 14137 23857 21206 31809 28274 39761 35343 47713 42412 4.75" 1.50 8860 7977 17721 15953 26581 23930 35441 31907 44301 39884 53162 47860 5.00" 1.50 9818 8934 19635 17868 29453 26802 39270 35736 49088 44670 58905 53604 2.00 9818 8247 19635 16493 29453 24740 39270 32987 49088 41234 58905 49480 USEFUL FORMULAS Fluid Pressure (psi) = Force (pounds) / Area (sq. in.) : PSI = F/A Cylinder Area (sq. in.) = 3.1416 x Radius2 (inch) : A = π x r2 Cylinder Force (pounds) - Pressure (psi) x Area (sq. in.) : F = P x A Cylinder Speed (ft./sec.) = (231 x gpm) / (12 x 60 x Area) : v = (0.3208 x gpm) / A Hydraulic Horsepower = Pressure (psi) x gpm / 1714 : HP = (psi x gpm) /1714 Fluid Motor Torque (in. lbs.) = Pressure (psi) x disp. (cu. in./rev) / 6.2822 : T = (P x d) / (2 x 3.1416) d = disp.rev. (cu. in./rev.) Fluid Motor Speed rpm = (231 x gpm) / disp. (cu. in.) : n = (231 x gpm) / d Fluid Motor Horsepower = Torque (in. lbs.) x rpm / 63025 : HP = TN / 63025 Pump Output Flow (gpm) = (Speed (rpm) x disp. (cu. in.)) / 231 : gpm = (n x d) / 231 Pump Input Horsepower = gpm x Pressure (psi) / 1714 x eff. : HP = (Q x P) / (1714 x E) 13 RULES-OF-THUMB Horsepower for driving a pump: For every 1 hp of drive, the equivalent of 1 gpm @ 1500 psi can be produced. Horsepower for idling a pump: To idle a pump when it is unloaded will require about 5% of its full rated horsepower. Wattage for heating hydraulic oil: Each watt will raise the temperature of 1 gallon of oil by 1 F per hour. Flow velocity in hydraulic lines: Pump suction lines 2 to 4 feet per second, pressure lines up to 500 psi - 10 to 15 ft/sec, pressure lines 500 to 3000 psi - 15 to 20 ft/sec; all oil lines in air-over-oil system: 4 ft/sec. Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

WH Series Double Lug Hydraulic Cylinders STANDARD WELDED CYLINDER SELECTION GUIDE 3000 PSI Working Pressure 6000 PSI Proof Pressure 30 Month Fair Exchange Warranty 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 End Cap - Durable steel cast end able to withstand continuous high loads. 2,3 Pins & Retainers - High tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers. 4 Piston Nut - Heavy duty, torqued, self locking piston nut holds piston in place under high cycle loading. 5 Piston Wear Ring - 33% glass filled nylon wear ring incorporated in piston to provide side load bearing area, preventing scoring of cylinder tube. 6 Piston - Precision machined providing a malleable bearing surface for extended cylinder life. 7 Piston Seal - PSP crown piston seal comes with expander to provide a positive piston seal with minimal friction, extending seal operation under high pressure applications. 8 Cylinder Shaft - High tensile steel, hard chrome plated shaft provides extended cylinder life in harsh applications. 9 Tube - Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. 10 Ports - ORB for positive sealing. Unless otherwise stated, cylinders assembled as follows: WH Series: Ports inline with pins. 11 Tube Seal - 90 durometer o-ring with anti-extrusion back-up washer to prevent leakage under high pressure and cycle loading. 12 Rod Seal - Polyurethane U-Cup providing long wearing, positive seal. 13 Cylinder Head - Offering increased bearing surface for high shock and side load applications. Comes with machined wrench flats for ease of servicing. 14 Rod Wiper - Heavy duty, nitrile preventing contaminants from entering cylinder. 15 Rod Clevis - Ductile iron comes with 360 thread contact area and positive set screw locking device able to withstand continuous high loads. 14 Bore 2.0 2.5 3.0 3.5 4.0 A* 10.25 10.25 10.25 10.25 10.25 A ASAE-8* 12.25 12.25 12.25 12.25 12.25 C 2.06 2.06 2.38 2.38 2.38 E 2.38 2.88 3.50 4.00 4.50 G 1.13 1.13 1.13 1.13 1.13 G1 1.13 1.13 1.13 1.13 1.13 H 2.50 2.50 2.63 2.63 2.63 H1 2.17 2.50 2.50 2.50 2.75 J 2.00 2.00 2.25 2.25 2.25 J1 2.00 2.00 2.00 2.00 2.13 K 1.02 1.02 1.02 1.02 1.02 M 1.125-12 1.125-12 1.25-12 1.25-12 1.25-12 P.75-16.75-16.75-16.75-16.75-16 *Retracted length (±.06)= A + stroke

3 0 0 0 P S I WH Series Double Lug Hydraulic Cylinders WH SERIES Bore Stroke Rod Dia. Order No. Model Max Rated PSI & Column Pin to Pin Center Ship Wt Pin Dia Load on Full Extension lbs. Retracted Extended PSI lbs. 8.00 1.13 644800 20WH08-112 18 1/4 26 1/4 16 1" 3000 9425 8.00 1.13 644808 20WH08-112 ASAE 20 1/4 28 1/4 16 1" 3000 9425 10.00 1.13 644801 20WH10-112 20 1/4 30 1/4 17 1" 3000 9425 12.00 1.13 644802 20WH12-112 22 1/4 24 1/4 18 1" 3000 9425 2" 14.00 1.13 644803 20WH14-112 24 1/4 38 1/4 20 1" 3000 9425 16.00 1.13 644804 20WH16-112 26 1/4 42 1/4 21 1" 3000 9425 18.00 1.13 644805 20WH18-112 28 1/4 46 1/4 22 1" 3000 9425 20.00 1.13 644806 20WH20-112 30 1/4 50 1/4 24 1" *2930 9204 24.00 1.13 644807 20WH24-112 34 1/4 58 1/4 26 1" *2180 6849 8.00 1.13 644810 25WH08-112 18 1/4 26 1/4 19 1" 3000 14726 8.00 1.13 644818 25WH08-112 ASAE 20 1/4 28 1/4 20 1" 3000 14726 10.00 1.13 644811 25WH10-112 20 1/4 30 1/4 21 1" 3000 14726 12.00 1.13 644812 25WH12-112 22 1/4 34 1/4 22 1" 3000 14726 2.5" 14.00 1.13 644813 25WH14-112 24 1/4 38 1/4 24 1" 3000 14726 16.00 1.25 644814 25WH16-125 26 1/4 42 1/4 26 1" 3000 14726 18.00 1.25 644815 25WH18-125 28 1/4 46 1/4 28 1" 3000 14726 20.00 1.25 644816 25WH20-125 30 1/4 50 1/4 29 1" *2855 14014 24.00 1.25 644817 25WH24-125 34 1/4 58 1/4 33 1" *2125 10431 8.00 1.25 644820 30WH08-125 18 1/4 26 1/4 26 1" 3000 21206 8.00 1.25 644828 30WH08-125 ASAE 20 1/4 28 1/4 27 1" 3000 21206 10.00 1.25 644821 30WH10-125 20 1/4 30 1/4 28 1" 3000 21206 12.00 1.25 644822 30WH12-125 22 1/4 34 1/4 31 1" 3000 21206 3" 14.00 1.25 644823 30WH14-125 24 1/4 38 1/4 33 1" 3000 21206 16.00 1.50 644824 30WH16-150 26 1/4 42 1/4 37 1" 3000 21206 18.00 1.50 644825 30WH18-150 28 1/4 46 1/4 40 1" 3000 21206 20.00 1.50 644826 30WH20-150 30 1/4 50 1/4 42 1" 3000 21206 24.00 1.50 644827 30WH24-150 34 1/4 58 1/4 47 1" 3000 21206 8.00 1.25 644830 35WH08-125 18 1/4 26 1/4 30 1" 3000 28863 8.00 1.25 644838 35WH08-125 ASAE 20 1/4 28 1/4 32 1" 3000 28863 10.00 1.25 644831 35WH10-125 20 1/4 30 1/4 33 1" 3000 28863 12.00 1.25 644832 35WH12-125 22 1/4 34 1/4 35 1" 3000 28863 3.5" 14.00 1.25 644833 35WH14-125 24 1/4 38 1/4 38 1" *2516 24207 16.00 1.50 644834 35WH16-150 26 1/4 42 1/4 42 1" 3000 28863 18.00 1.50 644835 35WH18-150 28 1/4 46 1/4 45 1" 3000 28863 20.00 1.50 644836 35WH20-150 30 1/4 50 1/4 48 1" 3000 28863 24.00 1.50 644837 35WH24-150 34 1/4 58 1/4 53 1" *2250 21647 8.00 1.38 644840 40WH08-138 18 1/4 26 1/4 36 1" 3000 37699 8.00 1.38 644848 40WH08-138 ASAE 20 1/4 28 1/4 37 1" 3000 37699 10.00 1.38 644841 40WH10-138 20 1/4 30 1/4 38 1" 3000 37699 12.00 1.38 644842 40WH12-138 22 1/4 34 1/4 41 1" 3000 37699 4" 14.00 1.38 644843 40WH14-138 24 1/4 38 1/4 44 1" *2821 35450 16.00 1.75 644844 40WH16-175 26 1/4 42 1/4 51 1" 3000 37699 18.00 1.75 644845 40WH18-175 28 1/4 46 1/4 54 1" 3000 37699 20.00 1.75 644846 40WH20-175 30 1/4 50 1/4 57 1" 3000 37699 24.00 1.75 644847 40WH24-175 34 1/4 58 1/4 64 1" 3000 37699 NOTE: * Indicates cylinder strength is affected, see page 6 for details. 15 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

STANDARD WELDED CYLINDER SELECTION GUIDE 30 Month Fair Exchange Warranty WX Series Cross Tube Hydraulic Cylinders 3000 PSI Working Pressure 6000 PSI Proof Pressure 1 2 3 4 5 6 7 8 9 10 11 12 13 1 End Cap - Durable steel cast end able to withstand continuous high loads. 2 Piston Nut - Heavy duty, torqued, self locking piston nut holds piston in place under high cycle loading. 3 Piston Wear Ring - 33% glass filled nylon wear ring incorporated in piston to provide side load bearing area, preventing scoring of cylinder tube. 4 Piston - Precision machined providing a malleable bearing surface for extended cylinder life. 5 Piston Seal - PSP crown piston seal comes with expander to provide a positive piston seal with minimal friction, extending seal operation under high pressure applications. 6 Cylinder Shaft - High tensile steel, hard chrome plated shaft provides extended cylinder life in harsh applications. 7 Tube - Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. 8 Ports - ORB for positive sealing. Unless otherwise stated, cylinders assembled as follows: WX Series: Ports 90 to pins. 9 Tube Seal - 90 durometer o-ring with anti-extrusion back-up washer to prevent leakage under high pressure and cycle loading. 10 Rod Seal - Polyurethane U-Cup providing long wearing, positive seal. 11 Cylinder Head - Offering increased bearing surface for high shock and side load applications. Comes with machined wrench flats for ease of servicing. 12 Rod Wiper - Heavy duty, nitrile preventing contaminants from entering cylinder. 13 Cross Tube End - Durable steel cast end able to withstand continuous high loads. 16 Bore 1.5 2.0 2.5 3.0 3.5 4.0 A* 8.00 8.00 8.00 8.00 8.00 8.00 C 0.75 0.88 0.88 0.88 1.00 1.00 E 1.88 2.38 2.88 3.50 4.00 4.50 H 1.50 2.00 2.00 2.00 2.50 4.00 H1 1.88 2.38 2.88 3.50 4.00 4.50 J 1.50 1.75 1.75 1.75 2.00 2.00 J1 1.50 1.75 1.75 1.75 2.00 2.00 K 0.77 1.02 1.02 1.02 1.02 1.02 P.56-18.75-16.75-16.75-16.75-16.75-16 *Retracted length (±.06)= A + stroke

3 0 0 0 P S I WX Series Cross Tube Hydraulic Cylinders WX SERIES Bore Stroke Rod Dia. 1.5" 2" 2.5" 3" 3.5" 4" Order No. Model Max Rated PSI & Column Pin to Pin Center Ship Wt Pin Dia Load on Full Extension lbs. Retracted Extended PSI lbs. 8.00 1.00 644950 15WX08-100 16 24 9 3/4" 3000 5301 10.00 1.00 644951 15WX10-100 18 28 10 3/4" 3000 5301 12.00 1.00 644952 15WX12-100 20 32 11 3/4" 3000 5301 14.00 1.00 644953 15WX14-100 22 36 12 3/4" 3000 5301 16.00 1.00 644954 15WX16-100 24 40 13 3/4" 3000 5301 18.00 1.00 644955 15WX18-100 26 44 14 3/4" 3000 5301 20.00 1.00 644956 15WX20-100 28 48 15 3/4" 3000 5301 24.00 1.00 644957 15WX24-100 32 56 17 3/4" *2618 4626 8.00 1.13 644900 20WX08-112 16 24 13 1" 3000 9425 10.00 1.13 644901 20WX10-112 18 28 14 1" 3000 9425 12.00 1.13 644902 20WX12-112 20 32 15 1" 3000 9425 14.00 1.13 644903 20WX14-112 22 36 17 1" 3000 9425 16.00 1.13 644904 20WX16-112 24 40 18 1" 3000 9425 18.00 1.13 644905 20WX18-112 26 44 19 1" 3000 9425 20.00 1.13 644906 20WX20-112 28 48 21 1" 3000 9425 24.00 1.13 644907 20WX24-112 32 56 23 1" *2359 7411 8.00 1.25 644910 25WX08-125 16 24 17 1" 3000 14726 10.00 1.25 644911 25WX10-125 18 28 18 1" 3000 14726 12.00 1.25 644912 25WX12-125 20 32 20 1" 3000 14726 14.00 1.25 644913 25WX14-125 22 36 21 1" 3000 14726 16.00 1.25 644914 25WX16-125 24 40 23 1" 3000 14726 18.00 1.25 644915 25WX18-125 26 44 25 1" 3000 14726 20.00 1.25 644916 25WX20-125 28 48 26 1" 3000 14726 24.00 1.25 644917 25WX24-125 32 56 29 1" *2301 11295 8.00 1.50 644920 30WX08-150 16 24 24 1" 3000 21206 10.00 1.50 644921 30WX10-150 18 28 27 1" 3000 21206 12.00 1.50 644922 30WX12-150 20 32 29 1" 3000 21206 14.00 1.50 644923 30WX14-150 22 36 32 1" 3000 21206 16.00 1.50 644924 30WX16-150 24 40 34 1" 3000 21206 18.00 1.50 644925 30WX18-150 26 44 36 1" 3000 21206 20.00 1.50 644926 30WX20-150 28 48 39 1" 3000 21206 24.00 1.50 644927 30WX24-150 32 56 43 1" 3000 21206 8.00 1.75 644930 35WX08-175 16 24 32 1" 3000 28863 10.00 1.75 644931 35WX10-175 18 28 35 1" 3000 28863 12.00 1.75 644932 35WX12-175 20 32 38 1" 3000 28863 14.00 1.75 644933 35WX14-175 22 36 41 1" 3000 28863 16.00 1.75 644934 35WX16-175 24 40 44 1" 3000 28863 18.00 1.75 644935 35WX18-175 26 44 47 1" 3000 28863 20.00 1.75 644936 35WX20-175 28 48 50 1" 3000 28863 24.00 1.75 644937 35WX24-175 32 56 57 1" 3000 28863 8.00 2.00 644940 40WX08-200 16 24 39 1" 3000 37699 10.00 2.00 644941 40WX10-200 18 28 43 1" 3000 37699 12.00 2.00 644942 40WX12-200 20 32 47 1" 3000 37699 14.00 2.00 644943 40WX14-200 22 36 50 1" 3000 37699 16.00 2.00 644944 40WX16-200 24 40 54 1" 3000 37699 18.00 2.00 644945 40WX18-200 26 44 58 1" 3000 37699 20.00 2.00 644946 40WX20-200 28 48 61 1" 3000 37699 24.00 2.00 644947 40WX24-200 32 56 69 1" 3000 37699 NOTE: * Indicates cylinder strength is affected, see page 6 for details. 17 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

/ ACCESSORIES 2 STAGE ADJUSTABLE STROKE CONTROLS Order No. Rod DIa. Ship Wt lbs. Description 638655 1 1/8 2.0 Each adjustable 638656 1 1/4 3.0 stroke control provides 638657 1 3/8 3.5 approximately 2" of stroke 638658 1 1/2 4.0 adjustment. 3 STAGE ADJUSTABLE STROKE CONTROLS Order No. Rod DIa. Ship Wt lbs. Description 638653 1 1/8 2.5 Each adjustable 638656 1 1/4 3.0 stroke control provides 638657 1 3/8 3.5 approximately 3" of stroke 638658 1 1/2 4.0 adjustment. STROKE CONTROL SPACER KITS Order Model Weight Rod DIa. No. No. lbs. Description Zinc Plated 639076 9110P 1 1/8 4 2 Pair - 1" wide 639123 9120P 1 1/4 4 1 Pair - 1 1/4" wide 639241 9130P 1 1/2 4 1 Pair - 1 1/2" wide 1 Pair - 1 3/4" wide 5 - Stainless steel retaining rings 18 PIN KITS Order No. Size Description Used on 640091 (2) 1" Dia. x 3 3/8" LG Package of (2) Clevis pins c/w (4) Hair pin retainers All 2" - 4" Bore TL, TH & TP Series All WH Series 638665 (1) 1" Dia. x 3 7/8" LG & (1) Package of (2) Clevis pins c/w (4) All 4 1/4" - 5" Bore TL & TP Series 1" Dia. x 4 1/2" LG Cotter pin retainers 638666 (2) 1 1/4" Dia. x 3 7/8" LG Package of (2) Clevis pins c/w (4) Cotter pin retainers All 3" - 4" Bore x 16" Stroke TL & TH ASAE Series 638667 (1) 1 1/4" Dia. x 3 7/8" LG & Package of (2) Clevis pins c/w (4) All 5" Bore TH Series (1) 1 1/4" Dia. x 4 1/2" LG Cotter pin retainers 640110 - Package of (12) Hair pin retainers - 638668 - Package of (12) 3/16 x 1 1/2 Cotter pin retainers -

/ ACCESSORIES BREATHERS FOR SINGLE ACTING APPLICATIONS Order No. Description 640368 3/8 NPT 640370 1/2 NPT 648277 9/16 ORB 648278 3/4 ORB Port Adapter Order No. Description 624643 3/4-16 ORB - 1/2 NPT 2500 PSI (TL Series) / Bore Rod Order Dia. No. Model No. Description 2.0" 1.125 639572 RK20L - 112 Up to 30" stroke 2.5" 1.125 639573 RK25L - 112 Up to 16" stroke 1.25 639574 RK25L - 125 18" stroke and up 3.0" 1.25 639575 RK30L - 125 Up to 20" stroke 1.50 639576 RK30L - 150 24" stroke and up 3.5" 1.25 639577 RK35L - 125 Up to 16" stroke 1.50 639578 RK35L - 150 18" stroke and up 1.25 639579 RK40L - 125 Up to 16" stroke 4.0" 1.50 639580 RK40L - 150 18" to 24" stroke 1.75 639581 RK40L - 175 24" stroke 2.00 639582 RK40L - 200 30" stroke and up 5.0" 1.50 639583 RK50L - 150 Up to 10" stroke 2.00 639584 RK50L - 200 12" to 36" stroke NOTE: TL series cylinder repair kits can be used in previous TR series cylinders with corresponding bore and shaft diameters. 3000 PSI (WH & WX Series) Bore Rod Order Dia. No. Model No. Description 1.5" 1.00 644457 RK15WD - 100 Up to 24" stroke WX 2.0" 1.13 644338 RK20WD - 112 Up to 24" stroke WH & WX 2.5" 1.13 644340 RK25WD - 112 Up to 14" stroke WH 1.25 644341 RK25WD - 125 16" to 24" stroke WH & all WX 3.0" 1.25 644343 RK30WD - 125 Up to 14" stroke WH 1.50 644345 RK30WD - 150 16" to 24" stroke WH & all WX 1.25 644421 RK35WD - 125 Up to 14" stroke WH 3.5" 1.50 639346 RK35WD - 150 16" to 24" stroke WH & WX 1.75 639061 RK35WD - 175 Up to 24" stroke WX 1.38 639746 RK40WD - 138 Up to 14" stroke WH 4.0" 1.75 639349 RK40WD - 175 16" to 24" stroke WH 2.00 639327 RK40WD - 200 Up to 24" Stroke WX CYLINDER REPAIR KITS 3000 PSI (Th & tp Series) Bore Rod Order Dia. No. Model No. Description 2.0" 1.125 639542 RK20H - 112 Up to 24" stroke 2.5" 1.125 639555 RK25H - 112 Up to 14" stroke & Rephasing 1.25 639556 RK25H - 125 16" to 24" stroke 2.7" 1.125 639557 RK27H - 112 Rephasing cylinder repair kit 3.0" 1.25 639558 RK30H - 125 Up to 14" stroke & Rephasing 1.50 639559 RK30H - 150 16" to 24" stroke 3.2" 1.25 639560 RK32H - 125 Rephasing cylinder repair kit 3.5" 1.25 639561 RK35H - 125 Up to 14" stroke & Rephasing 1.50 639562 RK35H - 150 16" to 24" stroke 3.7" 1.375 639563 RK37H - 137 Rephasing cylinder repair kit 1.375 639564 RK40H - 137 Up to 14" stroke & Rephasing 4.0" 1.50 639565 RK40H - 150 Rephasing cylinder repair kit 1.75 639566 RK40H - 175 16" to 24" stroke 2.00 639585 RK40H - 200 30" stroke and up 4.2" 1.50 639567 RK42H - 150 Rephasing cylinder repair kit 4.5" 1.50 639568 RK45H - 150 Rephasing cylinder repair kit 4.7" 1.50 639569 RK47H - 150 Rephasing cylinder repair kit 5.0" 1.50 639570 RK50H - 150 Rephasing cylinder repair kit 2.00 639571 RK50H - 200 8" to 24" stroke 19 Toll-Free 1-800-665-0247 Phone (204) 786-7921 Fax (204)889-9120

For placing orders or for further product information contact your local Lion Hydraulics sales representative, or contact: CANADIAN CORPORATE OFFICE: LION HYDRAULICS 51 Burmac Road, P.O. Box 429 Winnipeg, Manitoba, Canada R3C 3E4 Telephone 204-786-7921 Toll Free 1-800-665-0247 Fax 204-889-9120 info@monarchindustries.com For Orders Only: Fax 204-772-9496 orders@monarchindustries.com Canadian WAREHOUSES: Winnipeg, Manitoba Montreal, Quebec U.S.A. CORPORATE OFFICE : LION HYDRAULICS P.O. Box 20476 Minneapolis, Minnesota 55431 Telephone 204-786-7921 Toll Free 1-800-665-0247 Fax 204-889-9120 info@monarchindustries.com For Orders Only: Fax 204-772-9496 orders@monarchindustries.com U.S.A WAREHOUSES: Austell, Georgia Dallas, Texas Fresno, California Distributed by: Hydraulic Cylinder Display Quality and Service Since 1935. PRINTED IN CANADA 231827R12 0107