8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com MRTBSPD Wall Fixture Catalog Number MRTBSPD Manufacturer Description Area Light, Metal Halide Lamp; Lamp Wattage W; Lamp/Ballast Voltage /77/7 V; Lamp Included; Constant Wattage Autotransformer, HPF, Multi Tap Ballast; Refractor/Lens Type Impact Resistant Tempered Glass Lens Weight per unit. (lbs/each) Product Category Fluorescent Lighting Features Ballast Type CONSTANT WATTAGE AUTOTRANSFORMER, HPF, MULTI TAP Distribution/Beam Spread TYPE, ASYMMETRIC Lamp Included Lamp Type METAL HALIDE Lamp Wattage W Lamp/Ballast Voltage /77/7 V Refractor/Lens Type IMPACT RESISTANT TEMPERED GLASS LENS Material, Color, and Finish Finish Housing Material Descriptions Additional Information DARK BRONZE POLYESTER POWDER COATED RUGGED DIE CAST ALUMINUM LENS GASKETED WITH ONE PIECE BONDED TUBULAR SILICONE; REFLECTOR TYPE ANODIZED HYDROFORMED SEGMENTED ALUMINUM; SIZE 7-/ INCH Indoor Lighting - High Intensity Discharge Commodity Description Long Description AREA LIGHT, METAL HALIDE LAMP; LAMP WATTAGE W; LAMP/BALLAST VOLTAGE /77/7 V; LAMP INCLUDED; CONSTANT WATTAGE AUTOTRANSFORMER, HPF, MULTI TAP BALLAST; REFRACTOR/LENS TYPE IMPACT RESISTANT TEMPERED GLASS LENS Product Type Manufacturer Information Brand Model Area Light LITHONIA LIGHTING
8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com Packaging Carton Weight Per each. Uses, Certifications, and Standards Approval UL INCH SQUARE EXTRUDED ALUMINUM POLE ARM
Catalog Number FEATURES & SPECIFICATIONS Notes Type INTENDED USE Ideal for parking areas, street lighting, walkways and car lots. CONSTRUCTION Rugged, die-cast, soft corner aluminum housing with." nominal wall thickness. Die-cast door frame has impact-resistant, tempered, glass lens that is fully gasketed with one-piece tubular silicone. FINISH Standard finish is dark bronze (DDB) polyester powder finish, with other architectural colors available. OPTICAL SYSTEM Anodized, aluminum hydroformed reflectors: IES full cutoff distributions R (asymmetric), R (asymmetric), R (forward throw) and RS (square) are interchangeable. High-performance anodized, segmented aluminum reflectors IES full cutoff distributions SR (asymmetric), SR (asymmetric) and SRSC (forward throw, sharp cutoff). Segmented reflectors attach with tool-less fasteners and are rotatable and interchangeable. ELECTRICAL SYSTEM Ballast: High pressure sodium: 7-W is high reactance, high power factor. Constant wattage autotransformer for -W. Metal halide: 7-W is high reactance, high power factor and is standard with pulse-start ignitor technology. "SCWA" not required. Constant wattage autotransformer for 7-W. Super CWA (pulse start ballast), 88% efficient and EISA legislation compliant, is required for metal halide -W (SCWA option) for US shipments only. CSA, NOM or INTL required for probe start shipments outside of the US. Pulse-start ballast (SCWA) required for W, W, or W. Ballast is % factory-tested. Socket: Porcelain, horizontally oriented medium base socket for 7-M. Mogul base socket for 7M and above, and 7-S, with copper alloy, nickel-plated screw shell and center contact. UL listed W, 6V. LISTING UL Listed (standard). CSA Certified (see Options). UL listed for C ambient and wet locations. IP6 rated in accordance with standard IEC 9. Specifications subject to change without notice. EPA:. ft. Specifications *Weight:.9 lbs (6.8 kg) Length: 7-/" (. cm) Width: 7-/" (. cm) Depth: 7-/8" (8. cm) *Weight as configured in example below. " (. cm) Soft Square Lighting 7-/" (. cm) MH: 7W-W HPS: 7W-W ' to ' 7-/8" (8. cm) ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: M R TB SCWA SPD LPI Series Metal halide 7M,, M M 7M M M M M M Wattage High pressure sodium 7S S S S S Ceramic metal halide MHC 7MHC MHC MHC Distribution Hydroformed reflectors R IES type II asymmetric 6 R IES type III asymmetric 6 R IES type IV forward throw 6 RS IES type V square Segmented reflectors SR IES type II asymmetric 6 SR IES type III asymmetric 6 SRSC IES type IV forward throw Not available with SCWA. Not available with 8V. Not available with TBV. Must be ordered with SCWA. Reduced jacket ED8 required for SR, SR and SRSC optics. 6 House-side shield available. 7 Must specify CWI for use in Canada. Voltage 8 7 7 77 7 8 7 TB 8 HZ Type SPD Square pole RPD Round pole WBD Wall bracket WWD Wood pole or wall Length " arm 6 6" arm 9 9" arm " arm DADP Degree arm (pole) DADWB Degree arm (wall) WBA Decorative wall bracket, KMA Mast arm external fitter KTMB Twin mounting bar 8 Optional multi-tap ballast (, 8,, 77V; in Canada:, 77, 7V). 9 Optional five-tap ballast (, 8,, 77, 8V). Consult factory for available wattages. 9 arm is required when two or more luminaires are oriented on a 9 drilling pattern. Ships separately. Available with SPD and SPD9. Must specify voltage. N/A with TB. Only available with SR, SR, & SRSC optics. 6 Max allowable wattage lamp included. 7 May be ordered as an accessory. 8 See www.lithonia.com/archolors for additional color options. 9 Must be specified. Must use RPD9 Tenon Slipfitter Accessories Order as separate catalog number. Number of fixtures Finish 8 (blank) Dark bronze DWH White DBL Black DMB Medium bronze DNA Natural aluminum Tenon O.D. One Two@8 Two@9 Three@ Three@9 Four@9 -/8" T-9 T-8 T-9 T- T-9 T-9-7/8" T-9 T-8 T-9 T- T-9 T-9 " T-9 T-8 T-9 T- T-9 T-9 VG Vandal guard WG Wire guard Outdoor Sheet #: -M-S AL-7 Ballast (blank) Magnetic ballast CWI Constant wattage isolated SCWA Super CWA pulse start ballast NOTE: For shipments to U.S. territories, SCWA must be specified to comply with EISA. Options Shipped installed in fixture SF Single fuse, 77, 7V DF Double fuse 8,, 8 PD Power tray PER NEMA twist-lock receptacle only (no photocontrol) QRS Quartz restrike system 6 QRSTD QRS time delay,6 WTB Terminal wiring block HS House-side shield CSA CSA Certified INTL Available for MH probe start shipping outside the U.S. Shipped separately 7 PE NEMA twist-lock PE (, 8, V) PE NEMA twist-lock PE (7V) PE NEMA twist-lock PE (8V) PE7 NEMA twist-lock PE (77V) SC Shortening cap for PER option VG Vandal guard WG Wire guard Lamp 9 LPI Lamp included L/LP Less lamp
M Arm-mounted Soft Square Cutoff Coefficient of Utilization Initial Footcandles M R Test no. 98P.. 6 W pulse start metal halide lamp, rated 8 lumens. Footcandle values based on ' Classification: Type II, Short, Full Cutoff - - - M R Test no. 99P.. 6 W pulse start metal halide lamp, rated, lumens. Footcandle values based on ' Classification: Type II, Short, Full Cutoff - - - M R Test no. 9P.. 6 W pulse start metal halide lamp, rated 8, lumens. Footcandle values based on ' Classification: Unclassified (Type III, Very Short), Full Cutoff - - - M RHS Test no. 96P.. 6 W pulse start metal halide lamp, rated 8, lumens. Footcandle values based on ' Classification: Unclassified (Type III, Very Short), Full Cutoff - - - M RS Test no. 98P.. 6 W pulse start metal halide lamp, rated 8 lumens. Footcandle values based on ' Classification: Unclassified (Type NC, Very Short), Full Cutoff - - - Electrical Characteristics Line current Primary Primary (Amps) dropout Input Power Regulation Wattage/ballast voltage Start/Operating voltage watts factor (%) Line V = Lamp lumens./. CWA 8./. 9 Peak-lead./. 9+ ±% = ±% Autotransformer 77./.7 8.7/. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are subject to change without notice. Height Correction Factor (Multiply the fc level by the correction factor) ft. =. ft. =.7 ft. =.6 Existing Height New Height = Correction Factor Photometric data for other distributions can be accessed from www.lithonia.com. Sheet #: -M-S 7 Acuity Brands Lighting, Inc., Rev. 6/9/9 Outdoor One Lithonia Way, Conyers, GA Phone: 77-9-9 Fax: 77-98-9 www.lithonia.com
AREA LIGHTING Arm-Mounted Drop or Flat Lens Cutoff Contour Ordering Information Intended Use For parking areas, street lighting, walkways and car lots. Features Housing Rugged, die-cast, soft-corner aluminum housing with." nominal wall thickness. Extruded " soft corner arm for pole or wall mounting is standard. Door Frame die-cast door frame has impact-resistant, tempered glass lens which is fully gasketed with one-piece bonded silicone. die-cast aluminum door frame has prismatic, impact-resistant, tempered glass, drop dish acrylic lens or drop dish polycarbonate lens. Door frame is fully gasketed with one-piece silicone. Optics reflectors are anodized hydroformed or segmented aluminum. Four cutoff distributions available: R (roadway), R (asymmetric), R (forward throw) and R (symmetric). High-performance, segmented reflectors are rotatable and field-interchangable. reflector is optical-quality aluminum that works in tandem with a light-diffusing prismatic lens. Electrical Ballast is high-reactance, high power factor (7-W HPS,M and M) or high power factor constant-wattage autotransformer (7-W MH and HPS). Ballast is copper wound and % factory tested. Finish Dark bronze corrosion-resistant polyester powder finish (DDB), with other architectural colors available. Socket Porcelain, horizontally (position) oriented mogul-base socket (M and M are medium-base) with copper alloy, nickel-plated screw shell and center contact. UL Listed W-6V. KV pulse rated. Listings UL Listed (standard). CSA Certified or NOM Certified (see Options). UL Listed for wet locations. IP6 Rated. Example: M R SPD9 LPI LITHONIA OUTDOOR Series Wattage High pressure sodium 7S S S S S Metal halide M M 7M M M M, M, M, L H Distribution standard reflector R Type II roadway R Type III asymmetric R Type IV forward throw, sharp cutoff RS Type V square high performance reflector SR Type II asymmetric SR Type III asymmetric SRSC Type IV forward throw, sharp cutoff prismatic lens FP Flat C7T DPA Drop acrylic DPP Drop polycarbonate Voltage 8 77 7 8 TB Included SPD " square pole arm (std.) 6 SPD9 9" square pole arm RPD " round pole arm 6 RPD9 9" round pole arm WBD " wall bracket WBD9 9" wall bracket Shipped separately KMA Mast arm adapter KTMB Twin mounting bar DADP Degree arm (pole) DADWB Degree arm (wall) May be ordered with SCWA. Must be ordered with SCWA. Requires ED8 lamp when ordered with SR, SR or SRSC distributions. Consult factory for availability in Canada. Optional multi-tap ballast (V, 8V, V, 77V). In Canada V, 77V, 7V. 6 SPD9, RPD9 or WWD9 must be used when luminaires are oriented on DM9, DM9 or DM9 drilling pattern. 7 QRSTD available in select wattages. Consult factory. 8 Only available with SR, SR, SRSC optics. 9 May be ordered as an accessory. Includes mounting arm. Only available with SPD and SPD9 Dimensions are shown in inches (centimeters) unless otherwise noted. & FP DP EPA:. ft (. m ). ft (. m ) Square: 7-/ (.) 7-/ (.) Height: 7-/8 (8.) -/8 (8.) Max. weight: lbs (9. kg) lbs (8. kg) Options/accessories Installed LPI Lamp included L/LP Less lamp SF Single fuse, V, 77V, 7V (n/a TB) DF Double fuse, 8V, V, 8V (n/a TB) PER NEMA twist-lock receptacle only (no photocontrol) QRS Quartz restrike system (W max., V lamp not included) 7 PD Power tray 8 WTB Terminal block 8 EC Emergency circuit SCWA Super CWA pulse start ballast (n/a HPS, M or 7M) CSA CSA Certified NOM NOM Certified (consult factory) For optional architectural colors, see page. Shipped separately 9 PE NEMA twist-lock PE (V-V) PE NEMA twist-lock PE (7V) PE NEMA twist-lock PE (8V) PE7 NEMA twist-lock PE (77V) SC Shorting cap for PER option HS House-side shield (R, R, R) (SR, SR) VG Vandal guard for WG Wireguard for VG Vandal guard for WG Wireguard for WBA Decorative wall bracket for Applies to only. 76 www.lithonia.com, keywords: and PSG9