SKA ROTARY TABLE DIRECT DRIVE MOTORS
Mo t or Pow e r Com pa n y www.motorpow e rc o. c om info@motorpow e rc o. i t All r ight s re se rve d. Complet e or pa rt i a l re produ c t i on is no t allow e d w i t h ou t ou r pe rm i ssi on. All t echnic a l da t a i n t h i s c a t a l og may be ch a n ge d w i t h ou t pri or n ot i c e.
WELCOME TO MOTOR POWER COMPANY Directly driven Motor Power Company rotary tables provide versatile applications due to their backlash free structure. If necessary a compact servo system with high torque and high accuracy, SKA Rotary Table is the perfect answer for the ideal application. This complete series is provided with or without its perfectly coupling amplifier. Motor Power Company proposes not just components but complete motion solutions, combining direct drive motors with a series of drives with high flexibility and exceptional capabilities in a wide range of applications. CONTENTS Direct drive technolgy.............. pag. 5 Product lineup................... pag. 6 Type designation................. pag. 7 SKA RT 90 ratings and specifications... pag. 8 SKA RT 90 torque vs speed charts...... pag. 9 SKA RT 148 ratings and specifications... pag. 10 SKA RT 148 torque vs speed charts...... pag. 11 SKA RT 245 ratings and specifications... pag. 12 SKA RT 245 torque vs speed charts...... pag. 13 SKA RT 335 ratings and specifications... pag. 14 SKA RT 335 torque vs speed charts...... pag. 15 SKA RT 430 ratings and specifications... pag. 16 SKA RT 430 torque vs speed charts...... pag. 17 Feedback and wiring connection.......... pag. 18 Cables specifications........... pag. 22 Flexi Pro servo drive............. pag. 23 3
DIRECT DRIVE TECHNOLOGY GEARLESS POWERFUL SOLUTION WITH HIGHER POSITION ACCURACY Instantaneous peak torque till 2400 Nm A high-speed operation up to 1400 Rpm Maximum motor speed up to 900 Rpm High-precision indexing with over 1,000,000 PPR, after interpulation Absolute accuracy of ± 25 and 11 arc seconds No backlash for a high-precision, high-speed operation with shorter settling time Improved positioning accuracy Uncomplicated and trouble-free usability drives Perfect matching between motor and drives with different network communication Analog encoder for increasing the final resolution Parameters to change: speed control, torque or positioning control 4
DIRECT DRIVE SYSTEM TECHNICAL IMPROVEMENTS Simplified machine structure, adjustement and maintenance Direct connection to load increases torsional stiffness Low noise level No maintenance for lubrication, ideal for cleaning room applications Compact design for reduced space requirement Easy wiring and piping using the motor s hollow shaft No limits due to backlash, friction or inertia SKA Rotary Table motor peak torque can provide 800% of continuous torque Reduction and control of energy costs Energy efficiency APPLICATIONS SKA Rotary Table is suitable for a wide variety of applications. Semiconductor manufacturing Packaging machinery Converting equipment Integrated circuit inspection Liquid crystal screen manufacture Electronic parts assembly Manipulators Electronic parts assembly LED die bonding machine Part unloaders Actuators Rotary tables Material handling Capping machines Labelling processes Print registration stands Alternative energy Solar energy Wind energy 5
SKA ROTARY TABLE DIRECT DRIVE MOTORS PRODUCT LINEUP STALL TORQUE (Nm) PEAK TORQUE (Nm) SPEED (Rpm) POLES (nr) INERTIA (kg cm 2 ) WEIGHT (kg) EXTERNAL DIAMETER D (mm) HOLE DIAMETER d (mm) HEIGHT H (mm) DRIVE TYPE SKA RT 090.30 2 15,9 800 14 6,3 5,5 106 35 117 FPRO S05FS SKA RT 090.60 3,5 28 800 14 8,4 7,5 106 35 157 FPRO S05FS SKA RT 090.90 4,7 38 800 14 10,5 9,5 106 35 187 FPRO S05FS SKA RT 148.30 8 35 900 14 68,5 17 179 60 129 FPRO S05FS SKA RT 148.60 14 68 900 14 91,8 22,5 179 60 159 FPRO S05FS SKA RT 148.90 20 103 900 14 114,2 27,5 179 60 199 FPRO S08FS SKA RT 148.120 26 141 630 14 137,1 33 179 60 229 FPRO S08FS SKA RT 245.30 41 128 600 28 542,1 45 290 135 138 FPRO T05FS SKA RT 245.60 70 241 600 28 651,0 55,5 290 135 168 FPRO T10FS SKA RT 245.90 93 330 600 28 777,8 68 290 135 198 FPRO T10FS SKA RT 245.120 115 410 500 28 904,2 80,5 290 135 228 FPRO T10FS SKA RT 335.30 100 290 350 42 2847,0 76,5 390 175,11 138 FPRO T10FS SKA RT 335.60 164 585 350 42 3629,1 98,5 390 175,11 168 FPRO T10FS SKA RT 335.90 220 800 350 42 4411,0 121 390 175,11 198 FPRO T40 SKA RT 335.120 270 975 350 42 5193,0 143 390 175,11 228 FPRO T40 SKA RT 335.150 320 1200 300 42 5975,1 165 390 175,11 268 FPRO T40 SKA RT 430.30 210 458 300 56 8698,7 110 490 290 145 FPRO T20 SKA RT 430.60 340 800 300 56 10637,8 140 490 290 175 FPRO T20 SKA RT 430.90 450 1200 250 56 12577,0 170 490 290 205 FPRO T40 SKA RT 430.120 560 1600 150 56 14516,0 200 490 290 235 FPRO T40 SKA RT 430.150 660 1950 150 56 16455,8 230 490 290 265 FPRO T40 SKA RT 430.180 760 2400 100 56 18394,7 260 490 290 305 FPRO T40 6
Direct Drive Rotary Motor MOTOR TYPE DESIGNATION SKA RT 090 60 10 00 09 Model Size Feedback Degree of Connectors protection 1 2 3 4 5 1 2 Choose SKA ROTARY TABLE model among 90-148 - 245-335 - 430 Choose SKA ROTARY TABLE size among 30-60-90 for model 90 30-60-90-120 for model 148 30-60-90-120 for model 245 30-60-90-120-150 for model 335 30-60-90-120-150-180 for model 430 3 Choose feedback for SKA ROTARY TABLE among 10 for SinCos 8192ppr for model 90 and 148 11 for SinCos 18592ppr for model 245-335 - 430 4 Choose degree of protection for SKA ROTARY TABLE among 00 for IP 42 Standard version Flanges not sealed 01 for IP65 top flange (view A) 02 for IP65 bottom flange (view B) 03 for IP65 top and bottom flange 5 Choose connectors for SKA ROTARY TABLE 09 for M23 FPRO S 05 FS Drive Name Supply voltage Size 1 2 DRIVE TYPE SELECTION 1 2 FPRO is available A perfect coupling with SKA ROTARY TABLE already choosen among size S single phase 230 Vac T three phase 380Vac S05FS S08FS T05FS T10FS T20 T40 7
SKA RT 90 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) ENCLOSURE Totally enclosed, self-cooled POLES 14 ENCLOSURE RATING IP 42 (standard) THERMAL PROTECTION KTY84 SKA RT 90.30 SKA RT 90.60 SKA RT 90.90 Stall torque Nm 2 3,50 4,70 Peak torque Nm 15,90 28 38 Nominal torque Nm 1,70 2,40 3,20 Stall current Arms 1,25 1,46 1,96 Peak current Arms 14,0 17,8 20,0 Nominal current Arms 1,06 1,00 1,33 Nominal speed rpm 800 800 800 Maximum speed rpm 1400 1400 1400 Torque constant ± 5% Nm/Arms 1,60 2,40 2,40 Voltage constant ± 5% Vrms/krpm 96 144 144 Phase/phase resistance ± 5% Ohm 9,30 8,90 6,70 Phase/phase inductance mh 21,0 27,0 20,0 Electrical time constant msec 2,3 3,0 3,0 Thermal resistance C/W 3,20 2,60 2,10 Mechanical time constant ms 3,4 2,0 1,9 Max. theoretical acceleration rad s 2 25039 33057 36190 Rotor inertia Kg cm 2 6,35 8,47 10,50 Motor height mm 117 157 187 Motor weight Kg 5,5 7,5 9,5 Radial load N(@30rpm) 1650 1650 1650 Axial load N(@60rpm) 1310 1310 1310 Tilt moment Nm(@15rpm) 60 60 60 Values and torque/speed specifications here detailed are obtained with the SKA Rotary Table coupled to FLEXI PRO drive, with a coil temperature of 100 C. All others data are with a coil temperature of 25 C. Output continuous rating with 225x225x8mm heat sink flange coupling Availability for SKA ROTARY TABLE models 90.30-90.60-90.90 from second quarter 2012 8
SKA RT 090 TORQUE VS SPEED CHARTS SKA RT 090.30 SKA RT 090.60 SKA RT 090.90 9
SKA RT 148 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) ENCLOSURE Totally enclosed, self-cooled POLES 14 ENCLOSURE RATING IP 42 (standard) THERMAL PROTECTION KTY84 SKA RT 148.30 SKA RT 148.60 SKA RT 148.90 SKA RT 148.120 Stall torque Nm 8 14 20 26 Peak torque Nm 35 68 103 141 Nominal torque Nm 6,4 10,0 14,0 19,0 Stall current Arms 3,33 3,50 5,00 4,64 Peak current Arms 18,0 20,0 32,0 31,1 Nominal current Arms 2,66 2,50 3,50 3,39 Nominal speed rpm 600 600 600 500 Maximum speed rpm 900 850 850 630 Torque constant ± 5% Nm/Arms 2,40 4,00 4,00 5,60 Voltage constant ± 5% Vrms/krpm 144 240 240 340 Phase/phase resistance ± 5% Ohm 3,60 3,36 1,90 2,79 Phase/phase inductance mh 12,6 16,0 10,6 17,0 Electrical time constant msec 3,5 4,8 5,6 6,1 Thermal resistance C/W 1,21 1,13 0,94 0,79 Mechanical time constant ms 6,5 2,9 2,1 1,8 Max. theoretical acceleration rad s 2 5108 7433 9017 10280 Rotor inertia Kg cm 2 68,5 91,4 114,2 137,1 Motor height mm 129 159 199 229 Motor weight Kg 17 22,5 27,5 33 Radial load N(@30rpm) 4680 4680 4680 4680 Axial load N(@60rpm) 4370 4370 4370 4370 Tilt moment N(@15rpm) 254 254 254 254 Values and torque/speed specifications here detailed are obtained with the SKA Rotary Table coupled to FLEXI PRO drive, with a coil temperature of 100 C. All others data are with a coil temperature of 25 C. Output continuous rating with 370x370x10mm heat sink flange coupling 10
SKA RT 148 TORQUE AND SPEED CHARTS SKA RT 148.30 SKA RT 148.60 SKA RT 148.90 SKA RT 148.120 11
SKA RT 245 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) ENCLOSURE Totally enclosed, self-cooled POLES 28 ENCLOSURE RATING IP 42 (standard) THERMAL PROTECTION KTY84 SKA RT 245.30 SKA RT 245.60 SKA RT 245.90 SKA RT 245.120 Stall torque Nm 41 70 93 115 Peak torque Nm 128 241 330 410 Nominal torque Nm 34,5 55 68 85 Stall current Arms 4,97 7,45 9,89 9,93 Peak current Arms 18,6 30,9 40,0 40,0 Nominal current Arms 4,18 5,85 7,23 7,34 Nominal speed rpm 400 400 400 350 Maximum speed rpm 600 600 600 500 Torque constant ± 5% Nm/Arms 8,30 9,40 9,40 15,70 Voltage constant ± 5% Vrms/krpm 500 570 570 950 Phase/phase resistance ± 5% Ohm 3,23 2,07 1,14 2,80 Phase/phase inductance mh 32,0 21,0 18,0 33,5 Electrical time constant msec 9,9 10,0 15,8 12,0 Thermal resistance C/W 0,58 0,49 0,42 0,38 Mechanical time constant ms 3,8 2,3 1,5 1,5 Max. theoretical acceleration rad s 2 2360 3701 4242 4534 Rotor inertia Kg cm 2 542 651 777 904 Motor height mm 138 168 198 228 Motor weight Kg 45 55,5 68 80,5 Radial load N(@30rpm) 6050 6050 6050 6050 Axial load N(@60rpm) 5460 5460 5460 5460 Tilt moment Nm(@15rpm) 570 570 570 570 Values and torque/speed specifications here detailed are obtained with the SKA Rotary Table coupled to FLEXI PRO drive, with a coil temperature of 100 C. All others data are with a coil temperature of 25 C. Output continuous rating with 610x610x20mm heat sink flange coupling 12
SKA RT 245 TORQUE AND SPEED CHARTS SKA RT 245.30 SKA RT 245.60 SKA RT 245.90 SKA RT 245.120
SKA RT 335 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) ENCLOSURE Totally enclosed, self-cooled POLES 42 ENCLOSURE RATING IP 42 (standard) THERMAL PROTECTION KTY84 SKA RT 335.30 SKA RT 335.60 SKA RT 335.90 SKA RT 335.120 SKA RT 335.150 Stall torque Nm 100 164 220 270 320 Peak torque Nm 290 525 800 975 1200 Nominal torque Nm 87 136 167 206 232 Stall current Arms 10,60 10,40 14,00 17,20 16,80 Peak current Arms 36,7 40,0 60,0 70,0 70,0 Nominal current Arms 9,22 8,62 10,63 13,12 12,18 Nominal speed rpm 200 200 200 200 200 Maximum speed rpm 350 350 350 350 300 Torque constant ± 5% Nm/Arms 9,40 15,70 15,70 15,70 19,00 Voltage constant ± 5% Vrms/krpm 570 950 950 950 1150 Phase/phase resistance ±5% Ohm 1,24 1,41 0,92 0,67 0,78 Phase/phase inductance mh 12,0 18,0 12,9 10,4 12,6 Electrical time constant msec 9,7 12,8 14,0 15,5 16,1 Thermal resistance C/W 0,33 0,30 0,26 0,25 0,21 Mechanical time constant ms 6,0 3,1 2,5 2,1 1,9 Max. theoretical acceleration rad s 2 1018 1446 1813 1877 2008 Rotor inertia Kg cm 2 2847 3629 4411 5193 5975 Motor height mm 138 168 198 228 268 Motor weight Kg 76,5 98,5 121 143 165 Radial load N(@30rpm) 6900 6900 6900 6900 6900 Axial load N(@60rpm) 6300 6300 6300 6300 6300 Tilt moment Nm(@15rpm) 950 950 950 950 950 Values and torque/speed specifications here detailed are obtained with the SKA Rotary Table coupled to FLEXI PRO drive, with a coil temperature of 100 C. All others data are with a coil temperature of 25 C. Output continuous rating with 840x1840x30mm heat sink flange coupling 14
SKA RT 335 TORQUE AND SPEED CHARTS SKA RT 335.30 SKA RT 335.60 SKA RT 335.90 SKA RT 335.120 SKA RT 335.150 15
SKA RT 430 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) ENCLOSURE Totally enclosed, self-cooled POLES 56 ENCLOSURE RATING IP 42 (standard) THERMAL PROTECTION KTY84 SKA RT 430.30 SKA RT 430.60 SKA RT 430.90 SKA RT 430.120 SKA RT 430.150 SKA RT 430.180 Stall torque Nm 210 340 450 560 660 760 Peak torque Nm 458 800 1200 1600 1950 2400 Nominal torque Nm 175 268 332 450 520 680 Stall current Arms 13,30 21,80 19,40 17,80 17,80 14,60 Peak current Arms 40,00 70,00 70,00 70,00 70,00 63,50 Nominal current Arms 11,08 17,18 14,31 14,30 14,02 13,06 Nominal speed rpm 150 150 150 100 100 50 Maximum speed rpm 300 300 250 150 150 100 Torque constant ± 5% Nm/Arms 15,7 15,7 23,2 31,4 37,2 52,1 Voltage constant ± 5% Vrms/krpm 950 950 1400 1900 2250 3150 Phase/phase resistance ± 5% Ohm 1.11 0,47 0,64 0,88 0,96 1,57 Phase/phase inductance mh 16,0 9,2 14,2 21,0 23,5 39,4 Electrical time constant msec 14.4 19,6 22,1 23,9 24,5 25,1 Thermal resistance C/W 0.23 0.21 0.19 0.17 0.15 0.14 Mechanical time constant ms 5.9 3,0 2.3 1.9 1.7 1.6 Max. theoretical acceleration rad s 2 526 752 954 1102 1184 1304 Rotor inertia Kg cm 2 8698 10637 12577 14516 16455 18394 Motor height mm 145 175 205 235 265 305 Motor weight kg 110 140 170 200 230 260 Radial load N(@30rpm) 7700 7700 7700 7700 7700 7700 Axial load N(@60rpm) 6700 6700 6700 6700 6700 6700 Tilt moment Nm(@15rpm) 1460 1460 1460 1460 1460 1460 Values and torque/speed specifications here detailed are obtained with the SKA Rotary Table coupled to FLEXI PRO drive, with a coil temperature of 100 C. All others data are for coil a temperature of 25 C. Output continuous rating with 1000x1000x30mm heat sink flange coupling 16
SKA RT 430 TORQUE AND SPEED CHARTS SKA RT 430.30 SKA RT 430.60 SKA RT 430.90 SKA RT 430.120 SKA RT 430.150 SKA RT 430.180 17
FEEDBACK SPECIFICATIONS ENCODER SIN COS Motor size 90 148 245 335 430 Nominal Voltage Vdc 5 ± 5% Nominal current ma 220 Maximum frequency KHz 180 Electronic type Vpp 1 Zero impulse pulse/turn 1 N of pulses per revolution ppr 8192 8192 16384 23040 34560 Accuracy Arc sec 25.3 25.3 12.7 9 6 Resolution cpr Function of interpolator WIRING MOTOR CONNECTION POWER CONNECTOR FEEDBACK CONNECTOR PIN FUNCTION PIN FEEDBACK FUNCTION 1 Phase U 1 N.C. 2 PE 2 N.C. 3 Phase W 3 0 Vdc 4 Phase V 4 + 5Vdc 5 Sin/A A N.C. 6 Sin A B N.C. 7 Index/Z C KTY 84 (+) 8 Index Z D KTY 84 (-) 9 N.C. 10 Shield 11 Cos/B 12 Cos B 13 +5Vdc **Sense 14 0Vdc **Sense 15 N.C. 16 Reserved: do not connect 17 Reserved: do not connect 18
CABLES SPECIFICATION SIGNAL CABLES SUB-D 15 PIN FUNCTION FREE WIRE COLOUR 1 N.C. 2 0Vdc Sense Brown/Green 3 0 Vdc White 4 Index/Z Grey 5 N.C. 6 N.C. 7 Sin/A Yellow 8 Cos/B 9 +5Vdc Sense Red/Blue 10 +5Vdc Brown 11 Index Z Pink 12 N.C. 13 N.C. 14 Sin A Green 15 Cos B Purple Shield Shield Signal SUB-D cable for Flexi-Pro drive Signal free wire cable for general purpose For SUB-D cable order Lenght (mm) Order code 3000 003108007306 5000 003108007330 10000 003108007332 For free wire cable order Lenght (mm) Order code 3000 003108010500 5000 003108010502 10000 003108010504 POWER CABLES Marcatura FUNCTION U Phase U V Phase V W Phase W GND PE B+ N.C. B- N.C. T+ KTY 84 (+) T- KTY 84 (-) Power cable for SKA Rotary Table Power cable for models SKA RT 90-148 - 245 335.30-335.60 Power cable for models SKA RT 335.90-335.120 335.150-430 Lenght (mm) Order code Lenght (mm) Order code 3000 003108007314 5000 003108007302 10000 003108007316 3000 003108005080 5000 003108005104 10000 003108005106 FLYING CONNECTORS M23 Power connector pin included order code 007117000472 Signal connenctor pin included order code 007117000462 19
FLEXI PRO SERVO DRIVE The Flexi Pro series features superior flexibility and exceptional capabilities in a wide range of applications. Available either with 230 VAC and 380VAC supply, this drive family communicates with a motion control system via fieldbus either via CANopen, with the integrated interface, otherwise through Profibus or Ethercat using of additional fieldbus modules. Flexi Pro offers uncomplicated and trouble-free usability and yet allows to run and control high end applications. Wide use opportunities are guaranteed thanks to the perfect matching with SKA ROTARY TABLE motors and the connectivity with several feedback systems. FEATURE Integrated brake chopper Integrated EMC filters UL standard modules Free configuration software 20
FLEXIBLE AND COMPREHENSIVE DRIVES MOTION CONTROL Speed, torque and positioning controller with torque or speed limit Integrated positioning control FEATURE Time optimized positioning or jolt-free positioning Relative and absolute movements Integrated Point- to- brake point positioning chopper with or without active positioning profile Integrated Speed and EMC angle filters synchronization UL Electronic standard gear modules system, ecam Free 256 configuration freely programmable softwareposition sets Various homing methods SOFTWARE CAPABILITIES Flexi Pro configuration software consists of a parameterizing program ensuring quick set up and user-friendly configuration of the drive using a PC. Multilingual Automatic identification of the connected servo positioning controller and motor Automatic guidance through the first commissioning 4 channels oscilloscope function Offline parameter setting Loading and saving of parameterem sets INTEGRATED SAFETY FUNCTION Integrated safe stop according to EN-954-1 category Protection against unexpected movements FEATURE Two channels switch off for the power stage Less external safety components required Integrated brake chopper Short response times in case of failure INPUTS - OUTPUTS Freely programmable I/Os Inputs: 10 x digital in (24Vdc) 3 analog in (± 10Vdc, 2x 10 bit, 1x16 bit) Outputs: 4 x digital out (24Vdc) 1 x digital out (24Vdc) for brake 2 x analog out (± 10Vdc, 9 bit) 21
FLEXI PRO SERVO DRIVE STANDARD INTERFACES RS 232 (RS485), CAN bus (Can Open DSP 301 e 402) with interpolated position mode for multi axes applications OPTIONAL NETWORK COMMUNICATION Profibus Network topology: line (plus terminating resistor) Profibus partecipant: slave Maximum number of participants: 126 Communication profile: Profibus-DP V0 Baud rate: 9.6-12.000 kbit/s (automatic detection) Ethercat Etherct according to: IEEE-802.3u (100base-TX9 with 100Mbps (full duplex) Topology: Star and line topology Connector: RJ45 Interface: potential-free Ethercat Communication cycle: 1ms Data transmission: cyclic (PDO-communication) and acyclic (SDO-communication) Topology: Star and line topology Display: LED for operational amd link-detect Distributed clocks: according to IEEE 1588 OPTION SELECTION NETWORK CONNECTION Optional network connection available FPRO Profibus dp interface (order code 051800900000) FPRO EtherCat interface (order code 051800900001) POWER AND SIGNAL CONNECTOR SET Connector sets available FPRO S05FS power connector set (order code 051800910001) FPRO S08FS power connector set (order code 051800910002) FPRO T05FS - T10FS power connector set (order code 051800910004) FPRO T20 - T40 power connector set (order code 051800910005) FPRO signal connector set (order code 051800910003) 22
FLEXIBLE AND COMPREHENSIVE DRIVES FLEXI PRO S 230VAC FPRO S05 FS FPRO S08 Supply voltage Control voltage Rated current Maximum current for 0.5 s Dimension W x H x D 2) Weight 1x 100...230 VAC [± 10%], 50...60 Hz 24 VDC [± 20%] 5 Arms 8 Arms 20 Arms (Fel 3Hz) 1) 32 Arms (Fel 3Hz) 1) 200 x 54 x 200 mm 200 x 54 x 200 mm 2.1 kg 1.8 kg FLEXI PRO T 380VAC FPRO T05 FS FPRO T10 FS Supply voltage Control voltage Rated current Maximum current for 0.5 s Dimension W x H x D 2) Weight 3x 230...480 VAC [± 10%], 50...60 Hz 24 VDC [± 20%] 5 Arms 10 Arms 20 Arms (Fel 3Hz) 1) 40 Arms (Fel 20Hz) 1) 250 x 69 x 240 mm 250 x 69 x 240 mm 3.7 kg 3.7 kg FLEXI PRO T 380VAC FPRO T20 FPRO T40 Supply voltage Control voltage Rated current Maximum current for 3 s Dimension W x H x D 2) Weight 3x 230...480 VAC [± 10%], 50...60 Hz 24 VDC [± 20%] 20 Arms 40 Arms 41 Arms 70 Arms 330 x 89 x 242 mm 330 x 164 x 242 mm 8 kg 13 kg 1) Shorter times for lower electrical rotational frequencies 2) Without mounting plate 23
motorpowerco.com Catalogue 1.0.1/11-11 Motor Power Company s.r.l. Via Leonardo Da Vinci, 4 42024 Castelnovo Sotto Reggio Emilia - Italia Tel. 0039 0522 682710 Fax 0039 0522 683552 info@motorpowerco.it Motor Power Company GmbH Max-Braun-Straße 8 D-97828 Marktheidenfeld Germany Tel 0049 9391 9198905 Fax 0049 9391 9198907 info@motorpowerco.de Motor Power Company Asia Ltd. Room A 320, Bldg.1 Shanghai China Electric Green Technology Park N.271 Lv Ke Rd., Pudong New Area 201204 Shanghai P.R.C. Tel. 0086 (0) 21 61635996 Fax 0086 (0) 21 61635992 infoasia@motorpowerco.com