Index What s New FRL s, Thermowells, GG Gauges, 40mm & 50mm Liquid Filled, Digital eters, Diaphragm Seals 2-5 Quick Selector arsh Gauge Selection ade easy! 6-9 Filters Regulators Lubricators iniature () & Standard (2) FRL s, Filters, Regulators, Filter-Regulators, Lubricators 0-4 General Service Gauges arshalltown Value Series (0) Steel Case Series J (-4) 5-23 Liquid Filled Gauges 40mm & 50mm (5), Severe Service 63mm Stainless Steel Case (6), Severe Service 00mm Stainless Steel Case (8), Elite 00mm Safecase All Stainless Steel (20), H Series 00mm (2), 00mm Welded Socket HW Series (22), 63mm Brass Case (23) 24-28 Precision Service Gauges Quality (24), Test (26), Inspector s Test (28) 29-32 Process Gauges Dry and Liquid Filled (29) 33-35 Diaphragm Gauges Low Pressure (33), Vacuum Cleaner Test (35), Gas Pressure Test (35) 36-4 HVAC/R Gauges Serviceman Test Gauge (36), anifold Reds & Blues (37), Refrigeration Ammonia (38), Refrigeration (39), Contractor s HVAC (40), Heating System (4). 42-45 Special Application Gauges Sprinkler (42), Water Test (43), Paper achine (44), X-mas Tree Gauges (45) 46-47 Parts & Accessories 48-50 Diaphragm Seals ini, Welded & Removable Diaphragm Seals 5-55 Temperature Instruments Bimetal Thermometers (5), Pocket Thermometers(53), Industrial Thermometers & Wells (54), Tridicators (55). 56-58 Thermowells 59 Pressure Transducers Handheld Digital Pressure Indicators (59) 60-7 Electronic Controls Digital Panel ount (6-62), Nema 4 (63), Explosion Proof (64), PID Controllers (70), Loop Calibrator (7) 72-8 General Information & Reference i i Selection and Use of a Pressure Gauge (72), Pressure Gauge Operating Principle (73), How the Diaphragm Gauge Works (73), arsh Chemical Compatibility Table (74), Accuracy Table (75), Pressure Units Cross Reference Chart (76), Part Number Prefix Guide (77), Part number Suffix Guide (77), Abbreviations and Terms Used (77), arshalltown Crossover Guide (77), Terms & Conditions (78), Distributor Return Policy (79), Product Classes and options (79), Product Warnings, Claims, Recommendations and Notices (80), Custom Dials (8) 800-727-5646 www.marshbellofram.com buy gauges on-line!
What s New pg. 0 arshalltown GG Value Series pg. 53 Pocket Thermometers pg.47 Snubbers pg. 48-50 Diaphragm Seals pg. 56 58 Thermowells pg. 5 40mm & 50mm Liquid Filled Gauges pg. 6 9 FRL s pg. 60-7 Electronic Controls part of the process! 800-727-5646 www.marshbellofram.com
Quick Selector st ice The choacy, for accur safety & reliability! GAUGE SERIES GG VALUE SERIES GAUGES GENERAL SERVICE J GAUGE 40 /50 LIQUID FILLED SEVERE SERVICE 63 pg. 0 pg. pg. 5 pg. 6 ASE Grade B = ±3/2/3 (±2% of range across middle half of scale) Grade B = ±3/2/3 (±2% of range across middle half of scale) ±2.5% of range across full scale Grade B = ±3/2/3 (±2% of range across middle half of scale) CASE SIZE & 2" diameter, 2", 2, 3, & 4 diameter 40mm & 50mm diameter 63mm diameter CASE ATERIAL Drawn steel, pretreated for rust resistance & black enamel finish Drawn steel pretreated for rust resistance and black enamel finish 304 Stainless steel 304 Stainless steel CASE STYLES Lower ount, Center Back ount, Right & Left ounts Lower ount, Center Back, U-Clamp & Front Flange ounts Center Back ount Rolled ring, hermetically sealed case; Lower ount, Center Back, U-Clamp & Front Flange ount Copper Alloy Copper alloy Copper alloy tube with nickel plated brass socket Copper alloy tube & socket or 36 stainless steel tube & socket OVEENT Brass sector and pinion Brass sector and pinion Brass sector and pinion Brass sector and pinion CONNECTIONS 8" & NPT 40mm: /8" NPT 50mm: /4" NPT 5 to 60 0-30" Hg vacuum; compound ranges 30" Hg vacuum to 400 ; and 5 to 5,000 5 to 60 0-30" Hg vacuum; compound ranges 30" Hg vacuum to 400 ; and 5-0,000 STANDARD DIAL Dual Scale and kpa Dual scale and kpa Triple scale /BAR/kPa Dual scale and kpa Aluminum, black painted Aluminum, black painted Aluminum, black painted Aluminum, black painted Flat plastic window with steel friction ring, 2", 2, 3 flat twist in clearlok; 4 flat glass window w/friction ring Acrylic Polycarbonate FILL EDIU N/A N/A Glycerine Dry, glycerin, or silicone VENT N/A N/A Filler/Pressure relief plug Rubber plug with snip-off feature 2 2 8" NPT 800-727-5646 www.marshbellofram.com NPT buy gauges on-line!
Quick Selector World Class Instrumentation GAUGE SERIES SEVERE SERVICE 00 X SERIES pg. 8 ELITE 00 W GAUGES pg. 20 LIQUID FILLED 00 H SERIES pg. 2 WELDED SOCKET 00 HW SERIES pg. 22 ASE Grade A =±2//2 (±% of range across middle half of scale) Grade A = ±% full scale Grade A = ±% full scale Grade A = ±% full scale CASE SIZE 00mm diameter 00mm diameter 00mm diameter 00mm diameter CASE ATERIAL 304 Stainless steel 304 Stainless steel 304 Stainless steel 304 Stainless steel CASE STYLES Rolled ring, hermetically sealed case; Lower mount, Center Back, U-Clamp & Front Flange ount Safecase with blow-out back construction; Lower ount Lower ount, Panel ount with U-Clamp and three hole Front Flange ount Lower ount Copper alloy tube & socket or 36 stainless steel tube & socket 36 Stainless steel 36 Stainless steel 36 Stainless steel tube with socket welded to the case OVEENT Brass sector and pinion Stainless steel rotary movement Stainless steel Stainless steel CONNECTIONS NPT NPT NPT NPT 0-30" Hg vacuum; compound ranges 30" Hg vacuum to 300 ; 5-0,000 0-30" Hg vacuum 30-0,000 30-0,000 5-20,000 STANDARD DIAL Dual scale and kpa Dual scale and kpa Dual scale and kpa Dual scale and kpa Aluminum, black painted Aluminum, black painted Aluminum, black painted Aluminum, black painted Polycarbonate Safety glass Acrylic Safety glass FILL EDIU Dry, glycerin, or silicone Dry, glycerin or silicone Dry, glycerin, or silicone Dry, glycerin, or silicone VENT Rubber plug with snip-off feature Internal compensating diaphragm Rubber plug with snip-off feature Rubber plug with snip-off feature part of the process! 800-727-5646 www.marshbellofram.com 3 3
Quick Selector s The worldi ne broadest ild of liqu s! e filled gaug GAUGE SERIES QUALITY GAUGE H SERIES TEST GAUGE D SERIES INSPECTOR TEST GAUGE PROCESS GAUGE P SERIES pg. 24 pg. 26 pg. 28 pg. 29 ASE Grade A = ±2//2 (±% of range across middle half of scale) Grade 3A = ±0.25% full scale Grade 2A = ±0.50% full scale Grade 2A = ±0.50% full scale CASE SIZE 3 & 4 diameter 4 diameter 3" diameter 4 & 6" diameter CASE ATERIAL Black painted steel Black painted steel Nickel plated brass Safecase polypropylene (turret style only) & aluminum CASE STYLES Lower ount, Flush case (Front Flange w/u-clamp), Back Flange with Lower or Lower Back ounts Lower ount, Flush ount (Front Flange w/u-clamp & hinged ring) Lower ount Turret, Back Flange case, Front Flange ount, Lower or Lower Back ount Copper alloy socket and tube up to,000. Stainless steel tube, tip & socket above,000 Copper alloy tube & socket or 36 stainless steel tube & socket Copper alloy tube and socket Copper alloy or 36 stainless steel OVEENT Stainless steel Stainless steel Brass Stainless steel CONNECTIONS 0-30" Hg vacuum; compound ranges 30" Hg vacuum to 300 ; 5-20,000 0 to 30" Hg vacuum; compound ranges 30" Hg vacuum to 300 ; 5-0,000 0 to 30" Hg vacuum; 5 to,000 0 to 30" Hg vacuum; compound 30" Hg vacuum to 300 ; 5 to 20,000 STANDARD DIAL Single scale only Single scale only Dual scale and kpa Single scale with mirrored dial to avoid parallax 3 2 Recalibrator 4 Adjustable micrometer Knife-edge micrometeradjustable, Aluminum, black painted Aluminum, black painted, knife Adjustable micrometer, black edge painted Glass Glass Beveled glass Acrylic FILL EDIU N/A N/A N/A Dry, glycerin, or silicone VENT N/A Blowout disc N/A Internal compensating diaphragm 4 4 or NPT 800-727-5646 www.marshbellofram.com or NPT or NPT NPT buy gauges on-line!
Quick Selector Superior Quality, ideal for edical applications! GAUGE SERIES DIAPHRAG GAUGE G SERIES pg. 33 SPRINKLER GAUGE pg. 42 PAPER ACHINE GAUGE pg. 44 BI-ETAL THEROETERS pg. 5 ASE Grade A = ±2//2 (±% of range across middle half of scale) and Grade B = ±3//3 (±2% of range for ranges below 30" H 2 O) Grade B = ±3/2/3 (±2% of range across middle half of scale) Grade A = ±2//2 (±% of range across middle half of scale) ±% of span CASE SIZE 2, 3, & 4 diameter 3 diameter 3 diameter 2", 3" & 5" standard stem lengths of 2 to 24" CASE ATERIAL Drawn steel pretreated for rust resistance & black enamel finish Polished brass Chrome plated steel case Stainless steel CASE STYLES Lower ount, Center Back, U- Clamp & Front Flange ount Lower ount Lower Back ount; Hinged ring case & moisture-proof with weep hole Hermetically sealed; Center Back or Adjustable Phosphor bronze diaphragm soft-soldered to brass socket Copper alloy Copper Alloy Stainless steel stems OVEENT Brass sector and pinion Copper alloy Stainless steel Bi-metal sensing element with external reset feature CONNECTIONS 8" & NPT and special connections Dual scale with kpa; 0 to 200" H 2 0 vacuum; 0 to 300" H 2 0, 0 to 0, 0 to 60 oz/in 2. Triple scale 0-58 oz/in 2, inches H 2 0 & kpa NPT NPT NPT (2" case only); NPT (3"& 5" cases) 0 to 300 ; or 0 to 80 retard to 250 30 to,000 dual scale ranges from - 20º F through 000ºF (-50º C through 550º C) STANDARD DIAL Dual scale in. H 2 O & kpa, & kpa, or Triple scale oz/in 2 in. H 2 O, & kpa Dual scale and kpa, all dials are marked AIR/WATER Single Scale Standard dual scale in degrees, Celsius & Fahrenheit Aluminum, black painted Aluminum, black painted Aluminum, black painted w/recalibrator 2 & 3 : Twist-on clearlok acrylic window 4 : Flat acrylic window with friction ring One piece impact plastic screw-on lens Glass lens, chrome plated brass ring with weather-tight seal Aluminum, black painted Glass FILL EDIU N/A N/A N/A N/A VENT N/A N/A N/A N/A part of the process! 5 800-727-5646 www.marshbellofram.com 5
FRL s FRL & 2 FEATURES odular design for service & interchangeability iniature () & Standard (2) Small package size and light weight construction Competitively priced FILTERS has polycarbonate bowl, 2 has polycarbonate bowl with metal guard Stock Elements 5, 25 or 50 micron anual, semi-auto or auto drain available REGULATORS Bellofram Rolling Diaphragm for superior regulator performance Panel, pipe, or bracket (included) mounting etal body, polycarbonate bonnet and knob Non-rising adjustment knob with push-pull lock ring feature FILTER REGULATORS Aluminum and polycarbonate construction anual, semi-auto or autodrain available has polycarbonate bowl; 2 has polycarbonate bowl with metal guard Non-rising adjustment knob with push-pull lock ring feature For panel or bracket mounting, knob is easily removed by unscrewing retaining flange Bellofram Rolling Diaphragm for superior regulator performance LUBRICATORS See details on page 7. 6 6 FILTERS Port Size Filtration (micron) aximum Supply Pressure 8", NPT 5µ, 25µ, 50µ. Pa.4 BAR 65 Temperature Range 4º 40º F / 5º 60º C Drain anual / Semi-Auto Bowl Capacity 0.75 inch 3 Flow (based on 00 inlet pressure 55, 85 SCF with 50 micron filter) REGULATORS Effect of Supply Pressure variation < 0.2 g (25 g) on Outlet Pressure (3.8 mbar) Exhaust Capacity (5 g above <0.25 SCF 20 g set point) (<7 LP) ax. Supply Pressure 65 g (.4 BAR) Flow Capacity at 00 g (6.9 BAR) 40, 60 SCF supply and 70 g (4.8 BAR) outlet Output Pressure Ranges 0-0 g (0-0.69 BAR) 0-30 g (0-2. BAR) 0-60 g (0-4. BAR) 0-20 g (0-8.3 BAR) Total Air Consumption 0.3 SCFH (0.4 LP) @ aximum Output Port Size 8", NPT ounting Options Pipe, Panel or Bracket FILTER-REGULATORS Port Size 8", NPT Filtration (micron) 5µ, 25µ, 50µ aximum Supply Pressure. Pa.4 BAR 65 Temperature Range 4º 40º F / 5º 60º C Drain anual / Semi-Auto Bowl Capacity 0.75 inch 3 Regulator Output Range 0-0, 0-30, 0-60, 0-20 Flow (based on 00 supply/70 out) 40, 60 SCF LUBRICATORS Port Size 8", NPT Lubrication ist aximum Supply Pressure. Pa.4 BAR 65 Temperature Range 4º 40º F / 5º 60º C Bowl Capacity.22 inch 3 Flow (based on 00 inlet 55, 5 SCF pressure) 800-727-5646 www.marshbellofram.com 2, 3 8", NPT 5µ, 25µ, 50µ. Pa.4 BAR 65 4º 40º F / 5º 60º C anual / Semi-Auto / Auto 2.75 inch 3 20, 20, 20 SCF < 0.2 g (3.8 mbar) <0.25 SCF (<7 LP) 65 g (.4 BAR) 90, 20, 20 SCF 0-0 g (0-0.69 BAR) 0-30 g (0-2. BAR) 0-60 g (0-4. BAR) 0-20 g (0-8.3 BAR) 0.3 SCFH (0.4 LP), 3 8", NPT Pipe, Panel or Bracket, 3 8", NPT 5µ, 25µ, 50µ. Pa.4 BAR 65 4º 40º F / 5º 60º C anual / Semi-Auto / Auto 2.75 inch 3 0-0, 0-30, 0-60, 0-20 90, 20, 20 SCF, 3 8", NPT ist. Pa.4 BAR 65 4º 40º F / 5º 60º C 5.8 inch 3 25, 25, 25 SCF buy gauges on-line!
& 2: REGULATED PRESSURE VS. FLOW g BAR 80 5.5 70 4.8 60 4. 50 3.4 40 2.8 30 2. 20.4 0 0.7 0 0 SCF 0 LP 0 20.0 575 40.0 50 60.0 700 80.0 2265 00.0 2875 20.00 3450 & 2 ORDERING INFORATION SIZE iniature Series Standard Series 2 DESCRIPTION Filter F Regulator R Lubricator L Filter Regulator FR Filter Regulator FRP PLUS Lubricator Filter, Regulator, FRL Lubricator PORT SIZE 8" NPT ( only) N NPT 2N 3 8" NPT (2 only) 3N NPT (2 only) 4N PRESSURE 0-0, Optional A 0-30, Optional L 0-60, Optional 0-20, Standard H Omit for Filters & Lubricators FILTERS 50 icron Filter, 50 Standard 25 icron Filter 25 5 icron Filter 5 Omit for Regulators & Lubricators DRAIN anual Drain, Standard Semi-Automatic Drain S Auto Drain (2 only) A Omit for Regulators & Lubricators 2 FRL FRL s LUBRICATORS has polycarbonate bowl; remove bowl for filling. 2 has polycarbonate bowl with metal guard; top plug permits filling without removing bowl or shutting off air Adjust drip rate by hand, using graduated ring on, with screwdriver on 2 NOTE: Individual regulators, FRs, filters, and lubricators come complete with bracket. FRL assemblies come complete with all bracket/connectors. For 3/4" & " Port sizes, We have a larger 3 series available, please consult the factory. part of the process! 7 800-727-5646 www.marshbellofram.com 7
FRL s REPLACEENT PARTS DESCRIPTION ODEL # DESCRIPTION ODEL # iniature Size Connector Kit K iniature 5 micron Filter Element iniature 25 micron Filter Element iniature 50 micron Filter Element FK05 FK25 FK50 iniature Size Connector Kit FR+L K2 Standard 5 micron Filter Element Standard 25 micron Filter Element Standard 50 micron Filter Element 2FK05 2FK25 2FK50 Standard Size Connector Kit Standard Size Connector Kit FR+L 2K 2K2 iniature Bowl / anual Drain Assembly iniature Bowl / Semi-Automatic Drain Assembly D DSA iniature Size Filter or Lubricator Bracket Standard Size Filter or Lubricator Bracket FB 2FB iniature Size Regulator or Filter Regulator Bracket RB Standard Bowl / anual Drain Assembly Standard Bowl / Semi-Automatic Drain Assembly Standard Bowl / Automatic Drain Assembly 2D 2DSA 2DA PRESSURE GAUGES - GG Series Gauges pg. 0 Standard Size Regulator or Filter Regulator Bracket 2RB 8 800-727-5646 www.marshbellofram.com buy gauges on-line!
FRL s part of the process! 9 800-727-5646 www.marshbellofram.com 9
General Service Gauges ASE Grade B Accuracy Extra Savings with Quantity Pricing 4 Standard ounting Options:, CB, Right & Left arshalltown Value Series are the most economical, general purpose gauge in the arsh gauge line. Suited for use with water, oil, air, gas, or other non-corrosive media. Typical applications include FRL s, compressors, pumps, boilers, regulators, dryers as well as commercial and industrial equipment. STANDARD & PART NUBERS VALUE SERIES SPECIFICATIONS ASE Grade B = ±3/2/3% (±2% of range across middle half of scale) CASE ATERIAL Drawn steel, pretreated for rust resistance and black enamel finish CASE STYLE Lower ount CB Center Back ount Right ount Left ount ARSHALLTOWN VALUE SERIES Size ounting Connection 8" 0 to 5 0 to 30 GG530L8 0 to 60 GG560L8 0 to 00 GG500L8 0 to 60 GG560L8 0 to 200 CB 8" GG55C8 GG530C8 GG560C8 GG500C8 GG560C8 GG5200C8 Right 8" Left 8" 2" GG530G8 GG530F8 GG2030L4 GG560G8 GG560F8 GG2060L4 GG2000L4 GG2060L4 CB 8" CB 8" GG2030C4 GG2030L8 GG2030C8 GG2060C4 GG2000C4 GG2000L8 GG2000C8 GG2060C4 GG2060L8 GG2060C8 GG20200C4 GG20200C8 Copper alloy tube soft soldered to brass socket OVEENT Brass sector and pinion 5 to 60 DIAL STANDARD Dual scale and kpa Aluminum, Black painted Flat plastic window with steel friction ring 0 0 800-727-5646 www.marshbellofram.com buy gauges on-line!
General Service Gauges Dial Sizes:, 2", 2, 3 & 4 Superb Quality, Economical Price Pressure Ranges to 5000 arsh Instruments GENERAL SERVICE STEEL CASE GAUGES are an economical, general purpose gauge for pressure measurement from vacuum/compound through 5,000. Suited for use with water, oil, air, gas, or other non-corrosive media. Typical applications include FRLs, compressors, pumps, boilers, regulators, dryers as well as commercial and industrial equipment. STANDARD & PART NUBERS GENERAL SERVICE (SERIES J ) STEEL CASE GAUGE Internals Copper Alloy Case aterial Steel Dual Scale Standard /kpa Size 2" ounting / Case Style UC CB CB CB Connection (NPT) 8" 8" 8" 8" 8" 0 to 30" Hg VAC J0405 J0505 J0605 J05 J405 J805 J2005 30" Hg VAC to 5 30" Hg VAC to 30 J42 30" Hg VAC to 60 J44 30" Hg VAC to 00 30" Hg VAC to 50 J048 J058 J068 J8 J48 J88 J208 30" Hg VAC to 200 J0420 J0520 J0620 J20 J420 J820 J2020 30" Hg VAC to 300 J0424 J0524 J0624 J24 J424 J824 J2024 30" Hg VAC to 400 J26 J426 J826 J2026 0 to 5 J0440 J0540 J0640 J40 J440 J840 J2040 0 to 30 J0442 J0542 J0642 J42 J442 J842 J2042 0 to 60 J0446 J0546 J0646 J46 J446 J846 J2046 0 to 00 J0448 J0548 J0648 J48 J448 J848 J2048 0 to 60 J0452 J0552 J0652 J52 J452 J852 J2052 0 to 200 J0454 J0554 J0654 J54 J454 J854 J2054 0 to 300 J0458 J0558 J0658 J58 J458 J858 J2058 0 to 400 J60 J460 J860 J2060 0 to 600 J464 J864 0 to,000 0 to,500 0 to 2,000 0 to 3,000 J478 J878 J2078 0 to 5,000 J482 NOTE: Items are available on special order. However, minimums and lead times apply. Consult factory. SERIES J STEEL CASE SPECIFICATIONS ASE Grade B ±3/2/3% (±2% of range across middle half of scale) CASE SIZES, 2", 2, 3, 4 diameter CASE ATERIAL Drawn steel, pretreated for rust resistance and black enamel finish CASE STYLE Lower ount UC U-Clamp ount CB Center Back ount See option tables for Front Flange Copper alloy tube & socket OVEENT Brass sector and pinion CONNECTION 8" & NPT 0 to 30" Hg VAC; Compound 30" Hg vac to 400 ; 5 to 5,000 DIAL STANDARD Dual scale and kpa Aluminum, black painted, 2", 2, 3 : flat, twist-in Clearlok 4 : flat glass window with steel friction ring RESTRICTOR Standard for ranges,000 and above part of the process! 800-727-5646 www.marshbellofram.com
General Service Gauges STANDARD & PART NUBERS GENERAL SERVICE (SERIES J ) Internals Case aterial Dual Scale Standard Size ounting / Case Style Connection (NPT) 0 to 30" Hg VAC 30" Hg VAC to 5 30" Hg VAC to 30 30" Hg VAC to 60 30" Hg VAC to 00 30" Hg VAC to 50 30" Hg VAC to 200 30" Hg VAC to 300 30" Hg VAC to 400 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 Copper Alloy Steel /kpa 2" 2 3 4 UC UC CB CB UC UC CB UC 8" 8" 8" 8" J2405 J2605 J4005 J4605 J5005 J5405 J6005 J6205 J8005 J8605 J8805 J9005 J462 J464 J248 J2420 J2424 J2426 J2440 J2442 J2446 J2448 J2452 J2454 J2458 J2460 J268 J2620 J2624 J2626 J2640 J2642 J2646 J2648 J2652 J2654 J2658 J2660 J468 J4620 J4624 J4626 J4640 J4642 J4646 J4648 J4652 J4654 J4658 J4660 J4664 J4072 J4672 J4674 J4676 J2478 J2678 J4678 J4682 NOTE: 2 2 800-727-5646 www.marshbellofram.com J408 J4020 J4024 J4026 J4040 J4042 J4046 J4048 J4052 J4054 J4058 J4060 J802 J804 J508 J5020 J5024 J5026 J5042 J5046 J5048 J5052 J5054 J5058 J5060 J548 J5420 J5424 J5426 J5440 J5442 J5446 J5448 J5452 J5454 J5458 J5460 J5472 J608 J6020 J6024 J6026 J6042 J6046 J6048 J6052 J6054 J6058 J6060 J628 J6220 J6224 J6226 J6240 J6242 J6246 J6248 J6252 J6254 J6258 J6260 J808 J8020 J8024 J8026 J8040 J8042 J8046 J8048 J8052 J8054 J8058 J8060 J8064 J6272 J904 J868 J8620 J8624 J8626 J8640 J8642 J8646 J8648 J8652 J8654 J8658 J8660 J8664 J8672 J888 J8820 J8824 J8826 J8840 J8842 J8846 J8848 J8852 J8854 J8858 J8860 J8864 J8872 J908 J9020 J9024 J9026 J9040 J9042 J9046 J9048 J9052 J9054 J9058 J9060 J9064 J9072 J8074 J5476 J6276 J5078 J5478 J6078 J6278 J9076 J8682 J8882 J9082 Items are available on special order. However, minimums and lead times apply. Consult factory. buy gauges on-line!
General Service Gauges GENERAL SERVICE GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Restrictors Add restrictor H All models Consult factory for other sizes Catalog Dials only E See arsh Price List for minimums bar only L kg/cm 2 only L2 kpa only L3 & bar W & kg/cm 2 W2 & Pa W4 Custom Dials Custom face See arsh Price List for minimums Window Instrument glass w/ring (GS) F - 3 Consult factory for availability Acrylic F2 4 Consult factory for availability Pointer Adjustable (slotted) pointer (AD) Z 2"- 4 Consult factory for availability ax. Hand Assembly (X) Z2 2"- 4 Consult factory for availability Increased Accuracy Grade A: (2//2%) B All models - 0 piece minimum order Cases 3 hole front flange (FF) - 3 See below for part number [Part Numbers: x 8" (J07XX), 2"x 8" (J25XX), 2"x (J29XX), 2 x 8" (J6XX), 2 x (J63XX), 3 x 8" (J85XX), 3 x (J89XX)]. Consult factory for availability. Rings Special Connections Stainless steel (SS) J Consult factory for availability Brass (BR) J2 Friction ring (external), (FC) A to 3 CB or only Polished Stainless Steel Friction ring (external), black A2 to 3 CB or only (FB) Press ring, black (PB) A3 2" to 3 [Panel mount] Press ring, chrome (PC) A4 2" to 3 [Panel mount] Consult Factory for availability Dial Divisions Ranges General Service Series J 3/2/3% of Span Figure Intervals inor Graduations Vacuum 5 COPOUND 30" Hg VAC to 5 0 5 2 30" Hg VAC to 30 0 0 2 30" Hg VAC to 60 0 0 2 2 30" Hg VAC to 50 30 30 5 5 30" Hg VAC to 300 30 50 0 PRESSURE 0 to 5 3 0.2 0 to 30 5 0 to 60 0 0 to 00 0 2 0 to 60 20 2 0 to 200 50 4 0 to 300 50 5 0 to 400 50 5 0 to 600 50 0 HIGH PRESSURE 0 to,000 200 20 0 to,500 300 20 0 to 2,000 400 40 0 to 3,000 500 00 0 to 4,000,000 00 0 to 5,000,000 00 part of the process! 3 800-727-5646 www.marshbellofram.com 3
General Service Gauges SERIES J STEEL CASE DIENSIONS Part# Dial Size J04xx J05xx J06xx Jxx J4xx J8xx J20xx J24xx J26xx J40xx J46xx J50xx J54xx J60xx J62xx J80xx J86xx J88xx J90xx 4 4 2 2 2 2.0 2.0 2.0 2.0 2.0 2.0 2 2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 3 2 4 2 ount 8" 8" UC 8" CB 8" 8" CB CB 8" UC UC 8" 8" CB CB 8" UC UC CB UC A.67.60.67 2.20 2.20 2.20 2.20 2.06 2.06 2.73 2.73 2.73 2.73 2.58 2.58 3.7 3.7 3.65 4.53 B.75 2.25 2.25 2.8 2.8 3.98 800-727-5646 www.marshbellofram.com C.90.7.90.22.22.22.22.94.94.22.22.23.23.94.94.22.5.9.22 D E.50 F H 6" 6" 7 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6" 9 6".26 7 7.72.72.82.82.82.82.88.88 2.0 2.0.82.82.88.88 2.77.80.87 3.6 I J K L.06-.37.8.9.63 0-0.43 0-0.43.22.22.20.20.92.92 0-0.43 0-0.43.22.22.20.20.92.92 0-0.49.0.24.92.40.40.40.40.40.40 buy gauges on-line!
40mm & 50mm Liquid Fills Copper Alloy Internals Glycerine Filled Center Back ount Only arsh Instruments Liquid-Filled Gauges are designed to perform in rugged and harsh environmental conditions - especially where pulsation and vibration is a problem. Liquid Filled Gauges offer a significant cushioning and dampening effect, reducing pointer flutter and internal gauge damage. Liquid Filled Gauges feature a ventable top fill plug and can be mounted on a horizontal or vertical plain. The hermetically sealed construction reduces the chance of leaks and makes field filling an easy option. Liquid Filled Gauges STANDARD & PART NUBERS SEVERE SERVICE GAUGES Size 40mm 50mm Case aterial 304 Stainless Steel Internals Copper Alloy ounting / Case Style CB Connection (NPT) 8" NPT NPT Triple Scale Standard /BAR/kPa 0 to 5 4040P 5040P 0 to 30 4042P 5042P 0 to 60 4046P 5046P 0 to 00 4048P 5048P 0 to 60 4052P 5052P 40mm and 50mm GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Custom Dials Custom face See arsh Price List for minimums Other Ranges Consult factory for availability Fill edium Silicone (SL) I Consult factory A-Size B C E 27.00mm.5mm 3.00mm 40mm Dia.06" 0.45" 0.5" 50mm Dia 30.00mm.8".5mm 0.45" 0.00mm 0.39" 40/50mm GAUGE SPECIFICATIONS ±2.5% of range across full scale CASE SIZES 40 or 50 mm diameter CASE ATERIAL 304 Stainless Steel CASE STYLE CB Center Back mount Copper Alloy tube with nickel plated brass socket OVEENT Brass CONNECTION 8" NPT & NPT 5 to 60 DIAL STANDARD Triple scale /BAR/kPa Aluminum, black painted Acrylic FILL EDIU Glycerin RESTRICTOR Standard, all ranges VENT PLUG Filler/pressure relief plug TEPERATURE LIITS 0 40º F (filled) part of the process! 5 800-727-5646 www.marshbellofram.com 5
Liquid Filled Gauges 3 Standard ounting Options:, CB and U-Clamp Field Fillable Ranges to 0,000 arsh Instruments Liquid-Filled Gauges are designed to perform in rugged applications and harsh environmental conditions - especially where pulsation and vibration are a problem. Liquid Filled Gauges offer a significant cushioning and dampening effect, reducing pointer flutter and internal gauge damage; also lubricating the internals, and reducing corrosion. All stainless steel Liquid Filled Gauges feature a ventable top fill plug for pressure relief and ease of venting after installation. Pressure ranges are available through 0,000, with high pressure ranges offering a Helical Bourdon Tube for longer gauge life and increased durability. The hermetically sealed construction reduces the chance of leaks, and makes field filling an easy option. STANDARD & PART NUBERS 63mm STAINLESS STEEL GAUGE SEVERE SERVICE GAUGES SPECIFICATIONS Size Case aterial Internals ounting / Case Style Connection (NPT) Dual Scale Standard 0 to 30" Hg VAC 30" Hg VAC to 5 30" Hg VAC to 30 30" Hg VAC to 60 30"Hg VAC to 00 30" Hg VAC to 50 30" Hg VAC to 200 30" Hg VAC to 300 30" Hg VAC to 400 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 0 to 6,000 0 to 0,000 63mm Stainless Steel Copper Alloy UC /kpa J7605P J7205P ASE Grade B ±3/2/3% (±2% of range across middle half of scale) CASE SIZES 63mm diameter (2.47") CASE ATERIAL 304 Stainless Steel CASE STYLE Rolled ring, hermetically sealed case Lower ount CB Center Back ount UC U-Clamp ount Copper alloy or 36 stainless steel OVEENT Brass sector and pinion CONNECTION /4" 0 to 30" Hg VAC; Compound 30" Hg to 400 ; 5 to 0,000 DIAL STANDARD Dual scale and kpa standard Aluminum, Black painted Polycarbonate NOTE: CB Stainless Steel UC CB J6405P J7805P J7405P J6605P J648P J6420P J6424P J6426P J6440P J6442P J6446P J6448P J6452P J6454P J6458P J6460P J6464P J6472P J6474P J6476P J6478P J6482P J6484P J788P J7820P J7824P J7826P J7840P J7842P J7846P J7848P J7852P J7854P J7858P J7860P J7864P J7872P J7874P J7876P J7878P J7882P J7884P J7890P J748P J7420P J7424P J7426P J7440P J7442P J7446P J7448P J7452P J7454P J7458P J7460P J7464P J7472P J7474P J7476P J7478P J7482P J7484P J7490P J668P J6620P J6624P J6626P J6640P J6642P J6646P J6648P J6652P J6654P J6658P J6660P J6664P J6672P J6674P J6676P J6678P J6682P J6684P J6690P J762P J764P J768P J7620P J7624P J7626P J7640P J7642P J7646P J7648P J7652P J7654P J7658P J7660P J7664P J7672P J7674P J7676P J7678P J7682P J7684P J728P J7220P J7224P J7226P J7240P J7242P J7246P J7248P J7252P J7254P J7258P J7260P J7264P J7272P J7274P J7276P J7278P J7282P J7284P Items are available on special order. However, minimums and lead times apply. Consult factory. FILL EDIU Glycerin standard RESTRICTOR Standard for all ranges VENT PLUG Removable tip for venting 6 6 800-727-5646 www.marshbellofram.com buy gauges on-line!
63mm SEVERE SERVICE GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Delete suffix P All models Silicone option (SL) I All models Front Flange Adaptor ring (3 hole) R Center Back & U-Clamp only (factory Installed) Adaptor ring (no holes) R2 U-Clamp only (factory Installed) Bayonet Case & Ring w/safety Glass J Center Back or Lower ount (consult factory) Catalog Dials only E See arsh Price List for minimum bar only L kg/cm 2 L2 kpa only L3 & bar W & kg/cm 2 W2 & Pa W4 Custom Dials Logo or Custom face Consult factory for colors and minimums Restrictor Special restrictor H All models - See arsh Price List for minimum Restrictor removed H Increased Accuracy Grade A (2//2%) B All models - See arsh Price List for minimum Special Connections Consult Factory Liquid Filled Gauges FRONT FLANGE OUNT.24 [6.].04 [26.4] C.88 [22.4].2 [3.0] 20 20 A L J L G U-Clamp.000 TO.365 [9.3] PANEL VARIANCE.36 [34.5] K Center Back ount & Front Flange H Dimension Table Gauge Size Connection A C G H K J L L 63mm 2.66" 68mm.03" 26mm 2.95" 75mm 0.5" 4mm 0.56" 4mm 3.35 85mm 2.43" 62mm 2.5" 64mm part of the process! 7 800-727-5646 www.marshbellofram.com 7
Liquid Filled Gauges Brass or Stainless Steel Internals Ranges to 0,000 Hermetically Sealed Field Fillable arsh Instruments Liquid Filled Gauges are designed to perform in rugged applications and harsh environmental conditions - especially where pulsation and vibration are a problem. Liquid Filled Gauges offer a significant cushioning and dampening effect, reducing pointer flutter and internal gauge damage; also lubricating the internals, and reducing corrosion. All stainless steel Liquid Filled Gauges feature a vent top fill plug for pressure relief and ease of venting after installation. The hermetically sealed construction reduces the chance of leaks, and makes field filling an easy option. STANDARD & PART NUBERS 00mm STAINLESS STEEL GAUGE SPECIFICATIONS ASE Grade A ±2//2% (±% of range across middle half of scale) CASE SIZES 00mm diameter (3.89") CASE ATERIAL 304 Stainless Steel CASE STYLE Rolled ring, hermetically sealed case Lower ount CB Center Back ount UC U-Clamp ount Copper alloy or stainless steel OVEENT Brass sector and pinion CONNECTION NPT 0 to 30" Hg VAC Compound 30" Hg VAC to 300 5 to 0,000 DIAL STANDARD Dual scale & kpa Aluminum, black painted Polycarbonate FILL EDIU Glycerin standard RESTRICTOR Standard for all ranges VENT PLUG Removable tip for venting 8 8 SEVERE SERVICE GAUGES Internals Case aterial Dual Scale Standard Size ounting / Case Style Connections (NPT) 0 to 30" Hg VAC 30" Hg VAC to 30 30" Hg VAC to 60 30" Hg VAC to 00 30" Hg VAC to 50 30" Hg VAC to 200 30" Hg VAC to 300 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 0 to 6,000 0 to 0,000 Copper Alloy Stainless Steel /kpa 00mm CB X32965P X3250P X32502P UC X32887P X32888P X32889P X32504P X32505P X32506P X32507P X32508P X32509P X3250P X325P X3252P X3253P X3254P X3255P X3256P X3258P X3259P X32899P X32895P X32896P X32525P X32526P X32527P X32528P X32529P X32530P X3253P X32532P X32533P X32534P X32535P X32536P X32537P X32539P X32540P NOTE: 800-727-5646 www.marshbellofram.com X3290P X32902P X32903P X32546P X32547P X32548P X32549P X32550P X3255P X32552P X32553P X32554P X32555P X32556P X32557P X32558P X32560P X3256P Stainless Steel Stainless Steel /kpa 00mm CB X32967P UC X32929P X32930P X3293P X32630P X3263P X32632P X32633P X32634P X32635P X32636P X32637P X32638P X32639P X3294P X32942P X32943P X32678P X32679P X32680P X3268P X32682P X32683P X32684P X32685P X32686P X32687P X32935P X32936P X32937P X32654P X32655P X32656P X32657P X32658P X32659P X32660P X3266P X32662P X32663P X3264P X32642P X32644P X32645P X32647P X32689P X32690P X32692P X32693P X32695P X32665P X32666P X32668P X32669P X3267P Items are available on special order. However, minimums and lead times apply. Consult factory. buy gauges on-line!
00mm SEVERE SERVICE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Delete suffix P All models Silicone option (SL) I All models Front Flange Adaptor Ring (3 hole) R U-Clamp & Center Back only (factory installed) Catalog Dials only E See arsh Price List for minimum bar only L kg/cm 2 L2 kpa only L3 & bar W & kg/cm 2 W2 & Pa W4 Custom Dials Logo or custom face Consult factory for colors and minimums. Restrictor Special restrictor H All models - See arsh Price List for minimum Restrictor removed H All models - See arsh Price List for minimum Increased Accuracy Grade A ±% full scale B All models - See arsh Price List for minimum Special Connections Consult factory for Availability Liquid Filled Gauges 00mm STAINLESS STEEL GAUGE.4 (3.6) 20º 20º J L G Front Flange.30 [7.6] K.04 [26.4] C.88 [22.4] A L U-Clamp Dimension Table Gauge Size Connection 00mm.000 TO.365 [9.3] PANEL VARIANCE part of the process!.20 [30.5] A C G H K J L L 3.90" 99mm.03" 26mm 4.57" 6mm 0.9" 5mm 9/6" 4mm K 5.20" 32mm 3.62" 92mm 3.68" 94mm 9 800-727-5646 www.marshbellofram.com 9
Liquid Filled Gauges All Stainless Steel Field Fillable Ranges to 0,000 Liquid Filled or Dry Solid Front Design Safecase arsh Instruments All Stainless Steel Gauges are built for extended life, and designed for harsh and corrosive environments. These stainless steel gauges feature top fill plugs and are field fillable. arsh Liquid Filled Gauges offer significant cushioning and dampening which reduces pointer flutter and internal gauge damage. Suitable applications include: Refineries, chemical plants, offshore platforms, oil rigs, marine applications, general industrial application and OE processes. STANDARD & PART NUBERS 00mm ELITE STAINLESS STEEL SPECIFICATIONS ASE Grade A ±.0% of range across full scale CASE SIZES 00mm (4 ) CASE ATERIAL 304 Stainless Steel CASE STYLE Solid front & blow-out back Safecase construction Lower ount 36 SST tube welded to 36 SST socket OVEENT Stainless Steel CONNECTION NPT 30 to 0,000 and 0 to 30" VAC Hg DIAL STANDARD Dual scale and kpa Aluminum, black painted Safety glass FILL EDIU See Options VENT Internal compensating diaphragm 20 20 00mm ELITE STAINLESS STEEL Internals Case aterial Dual Scale Standard Size ounting/case Style Connection (NPT) 0 to 30" Hg VAC 0 to 30 0 to 60 0 to 00 0 to 200 0 to 300 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 0 to 0,000 36 SS Stainless Steel /kpa Elite 00mm W9605 W9642 W9646 W9648 W9654 W9658 W9664 W9672 W9674 W9676 W9678 W9682 W9690 NOTE: To order filled, consult filling chart below. 00mm ELITE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Glycerin (GL) Silicone (SL) Standard Add suffix P Add suffix PI All ranges All ranges All ranges 800-727-5646 www.marshbellofram.com buy gauges on-line!
Liquid Filled or Dry Field Fillable Ranges to 0,000 Heavy Duty Stainless Steel arsh Instruments Stainless Steel Gauges are built for extended life, and designed for harsh and corrosive environments. These stainless steel gauges feature top fill plugs and are field fillable. Pressure ranges are available to 0,000. arsh Liquid Filled Gauges offer significant cushioning and dampening which reduces pointer flutter and internal gauge damage. Suitable applications include: Refineries, chemical plants, offshore platforms, oil rigs, marine applications, general industrial application and OE processes. Liquid Filled Gauges STANDARD & PART NUBERS H SERIES 00mm STAINLESS STEEL Internals 36 SS Case aterial Stainless Steel Size 00mm (4") Dual Scale Standard /kpa ounting / Case Style UC FF Connection (NPT) 0 to 30 H0742 H0842 H0842R 0 to 60 H0746 H0846 H0846R 0 to 00 H0748 H0848 H0848R 0 to 60 H0752 H0852 H0852R 0 to 200 H0754 H0854 H0854R 0 to 300 H0758 H0858 H0858R 0 to 400 H0760 H0860 H0860R 0 to 600 H0764 H0864 H0864R 0 to,000 H0772 H0872 H0872R 0 to,500 H0774 H0874 H0874R 0 to 2,000 H0776 H0876 H0876R 0 to 3,000 H0778 H0878 H0878R 0 to 5,000 H0782 H0882 H0882R 0 to 0,000 H0790 H0890 H0890R To order filled, see filling chart below. 00mm H GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Standard All ranges Glycerin (GL) Add suffix P Silicone (SL) Add suffix PI DIENSIONS H SERIES 00mm SPECIFICATIONS ASE Grade A ±.0% of range across full scale CASE SIZES 00mm (4") CASE ATERIAL 304 Stainless Steel CASE STYLES Lower ount UC U-Clamp ount FF Front Flange ount 36 SST tube welded to 36 SST socket OVEENT Stainless Steel CONNECTION NPT lower or lowerback connection 30 to 0,000 DIAL STANDARD Dual scale and kpa Aluminum, black painted Acrylic FILL EDIU See options VENT Rubber plug with snip-off feature 3.88 DIA 3.00.50 20º 20º 4.96 DIA.72 AX PANEL \U+22054.56 4.25 DIA 4.00 DIA PANEL OPENING.4 3.88 DIA 4.25 DIA 4.00 DIA PANEL OPENING.22 DIA (3) HOLES /4 NPT - 3/4 HEX U-Clamp /4 NPT - 3/4 HEX part of the process!.65.26.75 Front Flange.26.65.75 2 800-727-5646 www.marshbellofram.com 2
Liquid Filled Gauges Liquid Filled or Dry - Field Fillable Socket Welded to the Case Ranges to 0,000 Heavy Duty All Stainless Steel arsh Instruments Stainless Steel Gauges are built for extended life, and designed for harsh and corrosive environments. These stainless steel gauges feature top fill plugs and are field fillable. Pressure ranges are available to 0,000. arsh Liquid Filled Gauges offer significant cushioning and dampening which reduces pointer flutter and internal gauge damage. Suitable applications include: Refineries, chemical plants, offshore platforms, oil rigs, marine applications, general industrial application and OE processes. STANDARD & PART NUBERS 00mm STAINLESS STEEL SPECIFICATIONS ASE Grade A ±.0% of range across full scale CASE SIZES 00mm (4") CASE ATERIAL 304 Stainless Steel CASE STYLES Lower ount 36 Stainless steel welded to the case OVEENT Stainless Steel CONNECTION NPT 5 to 0,000 DIAL STANDARD Dual scale and kpa Aluminum, black painted Safety glass FILL EDIU See options VENT Rubber plug with snip-off feature 22 22 HW 00mm STAINLESS STEEL GAUGES Internals Case aterial Dual Scale Standard Size ounting /Case Style Connection 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 0 to 0,000 0 to 20,000 36 SS Stainless Steel /kpa 00mm (4") NPT NOTE: NOTE: HW0942 HW0946 HW0948 HW0952 HW0954 HW0958 HW0960 HW0964 HW0972 HW0974 HW0976 HW0978 HW0982 HW0990 HW0994 Items are available on special order. However, minimums and lead times apply. Consult factory. To order filled, consult filling chart below. 00mm HW GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Glycerin (GL) Silicone (SL) Standard Add suffix P Add suffix PI All ranges 800-727-5646 www.marshbellofram.com buy gauges on-line!
Ranges to 0,000 Field Fillable Rugged One Piece Construction 63mm Case Size Liquid Filled Gauges arsh Instruments Brass Case liquid filled gauges are designed to perform in severe applications. When pulsation and vibration are a problem, this one piece forged brass gauge is up to the task. Liquid filled lubricates the movement, protects the gauge internals, and reduces pointer flutter. The hermetically sealed construction reduces the chance for leaks, and makes field filling an easy option. This product features a vented top fill plug for continuous pressure relief. Suitable applications include power units, robotics, pumps, compressors, hydraulics, as well as die cast machinery, marine, and automotive applications. STANDARD & PART NUBERS 63mm LIQUID FILLED BRASS Internals Copper Alloy Case aterial Brass Forged Size 63mm Dual Scale Standard /kpa ounting / Case Style Connection NPT 0 to 30" Hg VAC W9005 30" Hg VAC to 30 W902 30" Hg VAC to 60 W904 30" Hg VAC to 00 W906 0 to 5 W9040 0 to 30 W9042 0 to 60 W9046 0 to 00 W9048 0 to 60 W9052 0 to 200 W9054 0 to 300 W9058 0 to 400 W9060 0 to 600 W9064 0 to,000 W9072 0 to,500 W9074 0 to 2,000 W9076 0 to 3,000 W9078 0 to 5,000 W9082 0 to 6,000 W9084 0 to 7,500 W9086 0 to 0,000 W9090 63mm LIQUID FILLED BRASS GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Fill edium Dry (no fill) Standard All ranges Glycrine Add suffix P Silicone (SL) Add suffix PI Window Safety Glass (SG) F3 All ranges 2.62 [66.6].20 [30.5] BRASS GAUGE SPECIFICATIONS ASE Grade ±2//2% (% of range across middle half of scale) CASE SIZES 63mm (2.47") CASE ATERIAL Forged Brass (one piece case & socket) CASE STYLES Lower ount with screw on brass ring Copper alloy OVEENT Brass sector and pinion CONNECTION NPT 0 to 30" Hg VAC, Compound 30" to 00, 5 to 0,000 DIAL STANDARD Dual scale and kpa Aluminum, black painted Acrylic FILL EDIU See Options VENT Rubber plug with snip-off feature 2.9 [55.7] part of the process!.28 [7.] 23 800-727-5646 www.marshbellofram.com 23
Precision Service Gauges Dial Sizes: 3 and 4 Stainless Steel ovement 3 Case Styles Recalibrator Standard Ranges to 20,000 arsh Quality Gauges feature the exclusive recalibrator and are used on air compressors, reciprocating pumps, boilers, engines, hydraulic presses and countless other industrial and OE applications. Our Quality Gauges provide continuous service at an economical price. Accuracy is within ±% in the middle half of span. STANDARD & PART NUBERS QUALITY GAUGES (SERIES H ) SPECIFICATIONS ASE Grade A ±2//2% (±% of range in middle half of scale) CASE SIZES 3 and 4 diameter 6" diameter (see options) CASE ATERIAL Steel, Painted Black CASE STYLE P Plain Case, Lower ount G Back Flanged case F Front Flanged, Lower Back ount with U-Clamp; 4 has Hinged Ring (LB) Copper alloy OVEENT Stainless Steel RECALIBRATOR Standard 3 only, 4 has adjustable pointer CONNECTION or NPT 0 to 30" Hg VAC; Compound 30" Hg VAC to 300 ; 5 to 20,000 DIAL STANDARD single scale Aluminum, black painted Instrument Glass 24 24 QUALITY GAUGES Size Internals Case aterial ounting Connection (NPT) Style Scale Standard 0 to 30" Hg VAC 30" Hg VAC to 30 30" Hg VAC to 60 30" Hg VAC to 50 30" Hg VAC to 300 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 4,000 0 to 5,000 0 to 6,000 0 to 0,000 0 to 5,000 0 to 20,000 NOTE: 800-727-5646 www.marshbellofram.com With Recalibrator 3 Copper Alloy Steel P G H0205 H205 H022 H22 H024 H24 H028 H28 H0224 H224 H0240 H0242 H242 H0246 H246 H0248 H248 H0252 H252 H0254 H254 H0258 H258 H0260 H260 H0264 H264 H0272 H272 H0274 H274 H0276 H276 H0278 H278 H0280 H280 H0282 H282 H0284 H284 H0290 H290 H0292 H292 H0294 H294 LB G H805 H82 H84 H88 H824 LB F H2005 H202 H204 H208 H2024 H842 H846 H848 H852 H854 H858 H860 H864 H872 H874 H876 H878 H880 H882 H884 H890 H892 H894 H2042 H2046 H2048 H2052 H2054 H2058 H2060 H2064 H2072 H2074 H2076 H2078 H2080 H2082 H2084 H2090 H2092 H2094 With Adjustable Pointer 4 Copper Alloy Steel P P H4205 H4805 H422 H482 H424 H484 H428 H488 H4224 H4824 LB F H6005 H602 H604 H608 H6024 H4242 H4246 H4248 H4252 H4254 H4258 H4260 H4264 H4272 H6042 H6046 H6048 H6052 H6054 H6058 H6060 H6064 H6072 H4842 H4846 H4848 H4852 H4854 H4858 H4860 H4864 H4872 H4874 H4876 H4878 H4882 H4890 Items are available on special order. However, minimums and lead times apply. Consult factory. buy gauges on-line!
QUALITY GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Restrictors Add restrictor H All ranges Catalog Dials bar only L See arsh Price List for minimum kg/cm 2 only L2 kpa only L3 & bar W & kg/cm 2 W2 & kpa W3 & Pa W4 Custom Dials Logo or Custom Face All models - consult factory Window Acrylic (AY) F2 3-4 Safety Glass (SG) F3 3-4 Increased Accuracy Grade A: ±% full scale B All models Grade 2A: ±0.5% full scale B All models Cases Aluminum Back Flange J 4 6" consult factory Steel Hinged Ring Case J 6" consult factory Case Patterns & Dimensions A B C J BLOWOUT PLUG H.75 ACROSS WRENCH FLATS.25 Q N DRILLING TEPLATE Precision Service Gauges L PANEL OPENING Size A B C H J L N Q 3 4.86.66.55 3.75.6 3.75. 2.8 4.25 4 6.3.39 2.5 4.8.27 4.88. 3.88 5.3 K 20º H G 20º A B C J D QUALITY GAUGES (SERIES H ) Dial Divisions Ranges Quality Gauge Series H 2//2% of Span Figure Intervals inor Graduations Vacuum 3 0.2 COPOUND 30" Hg VAC to 5 5 3 0.5 0.2 30" Hg VAC to 30 0 5 0.5 30" Hg VAC to 60 0 0 0.5 30" Hg VAC to 50 30 30 2 30" Hg VAC to 300 30 30 5 2 PRESSURE 0 to 5 0. 0 to 30 5 0.2 0 to 60 5 0.5 0 to 00 0 0 to 60 20 0 to 200 20 2 0 to 300 50 2 0 to 400 50 2 0 to 600 50 5 HIGH PRESSURE 0 to,000 00 0 0 to,500 300 20 0 to 2,000 200 20 0 to 3,000 500 20 0 to 4,000 500 20 0 to 5,000 500 00 0 to 6,000,000 00 0 to 0,000,000 00 0 to 5,000 3,000 200 0 to 20,000 2,000 200 E.75 ACROSS WRENCH FLATS Size A B C D E G J K Panel ounting 3 3.72.69.55 3.34.67 4.3.6 2.00.22 part of the process! 25 800-727-5646 www.marshbellofram.com 25
Precision Service Gauges Adjustable icrometer Knife-Edge Pointer with irror Dial Stainless Steel ovement Dial Size: 4 Ranges to 0,000 arsh Test Gauges are used in precision laboratory applications and industrial environments where precise accuracy is demanded. Accuracy is ±0.25% of full span. STANDARD & PART NUBERS TEST GAUGE SERIES D SPECIFICATIONS ASE Grade 3A ±0.25% of range across full scale CASE SIZE 4 diameter CASE ATERIAL Steel, Black Painted CASE STYLE P Plain Case Lower ount () F Front Flanged with U-clamp and hinged ring (LB) PRESSURE RELIEF Blowout plug Copper alloy or 36 Stainless Steel OVEENT Stainless Steel CONNECTION or NPT 0 to 30" Hg VAC; Compound 30" Hg to 60 ; 5 to 0,000 DIAL STANDARD single scale aluminum with mirror dial to avoid parallax Knife-edge micrometer Aluminum, black painted Instrument Glass 26 26 TEST GAUGES Size Internals Case aterial ounting Connection (NPT) Style 0 to 30" Hg VAC 30" Hg VAC to 5 30" Hg VAC to 30 30" Hg VAC to 60 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 5,000 0 to 0,000 4 Copper Alloy Steel Steel P P D0205 D0605 D020 D060 D022 D062 D024 D064 D0240 D0640 D0242 D0642 D0246 D0646 D0248 D0648 D0252 D0652 D0254 D0654 D0258 D0658 D0260 D0660 D0264 D0664 Steel LB F D205 D20 D22 D24 D240 D242 D246 D248 D252 D254 D258 D260 D264 4 Stainless Steel Steel Steel P P D5205 D5605 D520 D560 D522 D562 D524 D564 D5240 D5640 D5242 D5642 D5246 D5646 D5248 D5648 D5252 D5652 D5254 D5654 D5258 D5658 D5260 D5660 D5264 D5664 D5272 D5672 D5274 D5674 D5276 D5676 D5278 D5678 D5282 D5682 D5290 D5690 Steel LB F D605 D60 D62 D64 D640 D642 D646 D648 D652 D654 D658 D660 D664 D672 D674 D676 D678 D682 D690 Steel LB F D6405 D640 D642 D644 D6440 D6442 D6446 D6448 D6452 D6454 D6458 D6460 D6464 D6472 D6474 D6476 D6478 D6482 D6490 NOTE: For test gauge in aluminum case, consult factory. For 6" test gauge; consult factory for availability. 800-727-5646 www.marshbellofram.com buy gauges on-line!
TEST GAUGE OPTIONS OPTION SUFFIX AVAILABLE ON ODELS Restrictors Add restrictor H All ranges Catalog Dials bar only L See arsh Price List for minimum Case Patterns & Dimensions kg/cm 2 only kpa only & bar & kg/cm 2 & kpa & Pa Custom Dials Logo or Custom Face All models - consult factory Window Acrylic (AY) F2 4 Size A B C H J L N Q 4 6.3.39 2.3 4.8.27 4.88. 3.88 5.3 L2 L3 W W2 W3 W4 Safety Glass (SG) F3 4 Cases 4 Polypropylene (TR) J Consult Factory 4 Aluminum Back Flange J2 Precision Service Gauges TEST GAUGE SERIES D Dial Divisions Ranges Test Gauge Series D 0.25% of Span Figure Intervals inor Graduations Vacuum 2 0. COPOUND 30" Hg VAC to 5 5 3 0.2 0. 30" Hg VAC to 30 0 5 0.5 0. 30" Hg VAC to 60 0 5 0.2 30" Hg VAC to 50 30 0 2 0.5 30" Hg VAC to 300 30 30 5 PRESSURE 0 to 5 0.5 0 to 30 2 0. 0 to 60 5 0.2 0 to 00 0 0.5 0 to 60 0 0.5 0 to 200 20 0 to 300 50 0 to 400 50 2 0 to 600 50 2 HIGH PRESSURE 0 to,000 00 5 0 to,500 00 5 0 to 2,000 200 0 0 to 3,000 500 0 0 to 4,000 500 20 0 to 5,000 500 20 0 to 6,000 500 20 0 to 0,000,000 50 0 to 5,000 3,000 00 0 to 20,000 2,000 200 part of the process! 27 800-727-5646 www.marshbellofram.com 27
Precision Service Gauges 3" Dial Vacuum to,000 Range Recalibrator on Dial Face ASE Grade 2A Accuracy arsh Inspector s Test Gauges are specifically designed for use by steam boiler, air brake and pressure system inspectors. The rugged 3" Inspector s Test Gauge features a nickel-plated case and an accuracy of ±0.5% of span. STANDARD & PART NUBERS INSPECTORS TEST GAUGE SPECIFICATIONS ASE Grade 2A ±0.5% of span across full scale CASE SIZES 3" diameter CASE ATERIAL Nickel Plated Brass CASE STYLE Lower ount with threaded ring Copper alloy tube and socket OVEENT All Brass RECALIBRATOR Adjustable dial screw CONNECTION NPT 0 to 30" Hg VAC; 5 to,000 DIAL STANDARD Single Scale Knife-edge, Aluminum, black painted Beveled glass PROTECTIVE COVER Opaque plastic lens cover 28 28 INSPECTOR S TEST GAUGES Size Internals ounting Connection (NPT) Case Scale Standard 0 to 30" Hg VAC 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 600 0 to,000 3" Copper Alloy Nickel Plated Brass D505 D540 D542 D546 D548 D552 D554 D558 D564 D572 INSPECTOR S TEST GAUGE OPTIONS OPTION Restrictors Catalog Dials Add restrictor bar only kg/cm2 only H L L2 kpa only & bar L3 W W2 Custom Dials 800-727-5646 www.marshbellofram.com & kg/cm2 & kpa & Pa Logo or Custom Face SUFFIX AVAILABLE ON ODELS W3 W4 All ranges See arsh Price List for minimum All models - consult factory buy gauges on-line!
4 and 6" Dials 4 Safecase Designs Pressure Ranges Vacuum to 20,000 Dry or Liquid Filled icrometer Pointer arsh Process Gauges are first in performance. With over 25 years of proven experience, arsh offers the most complete line of process instrumentation in the industry. An extensive list of designs and options makes the arsh line of Process Gauges the intelligent and practical choice in process instrumentation. All case styles feature safecase solid-front construction. Process Gauges STANDARD & PART NUBERS PROCESS GAUGES Size 4 aterial Polypropylene Case Internals Copper Alloy Stainless Steel ounting LB LB LB Connection (NPT) Case Style T T T T T T Scale Standard 0 to 30" Hg VAC P005 P0205 P0505 P0605 P505 P5205 30" Hg VAC to 5 P00 P020 P050 P060 P50 P520 30" Hg VAC to 30 P02 P022 P052 P062 P52 P522 30" Hg VAC to 60 P04 P024 P064 P54 P524 30" Hg VAC to 00 P06 P026 P056 P066 P56 P526 30" Hg VAC to 200 P020 P0220 P0520 P0620 P520 P5220 30" Hg VAC to 300 P024 P0224 P0524 P0624 P524 P5224 0 to 5 P040 P0240 P0540 P0640 P540 P5240 0 to 30 P042 P0242 P0542 P0642 P542 P5242 0 to 60 P046 P0246 P0546 P0646 P546 P5246 0 to 00 P048 P0248 P0548 P0648 P548 P5248 0 to 60 P052 P0252 P0552 P0652 P552 P5252 0 to 200 P054 P0254 P0554 P0654 P554 P5254 0 to 300 P058 P0258 P0558 P0658 P558 P5258 0 to 400 P060 P0260 P0560 P0660 P560 P5260 0 to 600 P064 P0264 P0564 P0664 P564 P5264 0 to,000 P068 P0268 P0568 P0668 P568 P5268 0 to,500 P0574 P574 P5274 0 to 2,000 P0576 P576 P5276 0 to 3,000 P0578 P578 P5278 0 to 5,000 P0582 P582 P5282 0 to 0,000 P0590 P590 P5290 0 to 5,000 P592 P5292 0 to 20,000 P594 P5294 Add P Suffix to P/N for Liquid Filling with Glycerine, add PI for Silicone. NOTE: Lower back mount gauges are not fillable NOTE: Items are available on special order. However, minimums and lead times apply. Consult factory. part of the process! POLYPROPYLENE CASE SPECIFICATIONS ASE Grade 2A ±0.5% of full scale CASE SIZES 4 and 6" diameter CASE ATERIAL Safecase polypropylene (turret style only) & safecase aluminum CASE STYLE 4 : T Turret (polypropylene), G Back flanged case (aluminum) or H Front flange hinged ring (aluminum) 6": G Back flanged case. Copper alloy or 36 stainless steel OVEENT Stainless Steel CONNECTION or NPT Lower ount LB Lower Back ount 0 to 30" Hg VAC; Compound 30" Hg VAC to 300 ; 5 to 20,000 DIAL STANDARD Single Scale Aluminum Adjustable icrometer, black painted Acrylic FILL EDIU Dry or filled. Note: ALL 4 lower mount Process Gauges are field-fillable. Optional factory filled glycerin or silicone SAFECASE Safecase construction standard on all Process Gauges VENT Internal compensating diaphragm 800-727-5646 www.marshbellofram.com 29
Process Gauges PROCESS GAUGES - STANDARD & PART NUBERS Size Case Internals ounting Connection (NPT) Case Style Scale Standard 0 to 30" Hg VAC 30" Hg VAC to 5p 30" Hg VAC to 30p 30" Hg VAC to 60p 30" Hg VAC to 00p 30" Hg VAC to 200p 30" Hg VAC to 300p 0 to 5p 0 to 30p 0 to 60p 0 to 00p 0 to 60p 0 to 200p 0 to 300p 0 to 400p 0 to 600p 0 to,000p 0 to,500p 0 to 2,000p 0 to 3,000p 0 to 5,000p 0 to 0,000p 0 to 5,000p 0 to 20,000p Size Case Internal ounting Connection (NPT) Case Style Scale Standard 0 to 30" Hg VAC 30" Hg VAC to 5p 30" Hg VAC to 30p 30" Hg VAC to 60p 30" Hg VAC to 00p 30" Hg VAC to 200p 30" Hg VAC to 300p 0 to 5p 0 to 30p 0 to 60p 0 to 00p 0 to 60p 0 to 200p 0 to 300p 0 to 400p 0 to 600p 0 to,000p 0 to,500p 0 to 2,000p 0 to 3,000p 0 to 5,000p 0 to 0,000p 0 to 5,000p 0 to 20,000p 4 Polypropylene Stainless Steel LB T T P5605 P5705 P560 P570 P562 P572 P564 P574 P566 P576 P5620 P5720 P5624 P5724 P5640 P5740 P5642 P5742 P5646 P5746 P5648 P5748 P5652 P5752 P5654 P5754 P5658 P5758 P5660 P5760 P5664 P5764 P5668 P5768 P5674 P5774 P5676 P5776 P5678 P5778 P5682 P5782 P5690 P5790 P5692 P5792 P5694 P5794 4 Aluminum Stainless Steel LB LB G G P5005 P5505 P500 P550 P502 P552 P504 P554 P506 P556 P5020 P5520 P5024 P5524 P5040 P5540 P5042 P5542 P5046 P5546 P5048 P5548 P5052 P5552 P5054 P5554 P5058 P5558 P5060 P5560 P5064 P5564 P5068 P5568 P5074 P5574 P5076 P5576 P5078 P5578 P5082 P5582 P5090 P5590 P5092 P5592 P5094 P5594 30 30 Aluminum Copper Alloy G P0005 P000 P002 P004 P006 P0020 P0024 P0040 P0042 P0046 P0048 P0052 P0054 P0058 P0060 P0064 P0068 LB H P8005 P800 P802 P804 P806 P8020 P8024 P8040 P8042 P8046 P8048 P8052 P8054 P8058 P8060 P8064 P8068 P8074 P8076 P8078 P8082 P8090 P8092 P8094 G P0505 P050 P052 P054 P056 P0520 P0524 P0540 P0542 P0546 P0548 P0552 P0554 P0558 P0560 P0564 P0568 LB H P8505 P850 P852 P854 P856 P8520 P8524 P8540 P8542 P8546 P8548 P8552 P8554 P8558 P8560 P8564 P8568 P8574 P8576 P8578 P8582 P8590 P8592 P8594 LB G P005 P00 P02 P04 P06 P020 P024 P040 P042 P046 P048 P052 P054 P058 P060 P064 P068 LB G P505 P50 P52 P54 P56 P520 P524 P540 P542 P546 P548 P552 P554 P558 P560 P564 P568 LB H P6005 P600 P602 P604 P606 P6020 P6024 P6040 P6042 P6046 P6048 P6052 P6054 P6058 P6060 P6064 P6068 6" Aluminum Copper Alloy G G P20005 P20505 P2000 P2050 P2002 P2052 P2004 P2054 P2006 P2056 LB G P2005 P200 P202 P204 P206 LB G P2505 P250 P252 P254 P256 P20040 P20042 P20046 P20048 P20052 P20054 P20058 P20060 P20064 P20068 P2040 P2042 P2046 P2048 P2052 P2054 P2058 P2060 P2064 P2068 P2540 P2542 P2546 P2548 P2552 P2554 P2558 P2560 P2564 P2568 P20540 P20542 P20546 P20548 P20552 P20554 P20558 P20560 P20564 P20568 Aluminum Stainless Steel LB H G P6505 P4005 P650 P400 P652 P402 P654 P404 P656 P406 P6520 P6524 P6540 P4040 P6542 P4042 P6546 P4046 P6548 P4048 P6552 P4052 P6554 P4054 P6558 P4058 P6560 P4060 P6564 P4064 P6568 P4068 6" Aluminum Stainless Steel G G P24005 P24505 P2400 P2402 P2452 P2404 P2454 P2406 P2456 P24040 P24042 P24046 P24048 P24052 P24054 P24058 P24060 P24064 P24068 P24074 P24076 P24078 P24082 P24090 P24092 P24094 P24540 P24542 P24546 P24548 P24552 P24554 P24558 P24560 P24564 P24568 P24574 P24576 P24578 P24582 P24590 P24592 P24594 G P4505 P450 P452 P454 P456 P4540 P4542 P4546 P4548 P4552 P4554 P4558 P4560 P4564 P4568 P4574 P4576 P4578 P4582 P4590 P4592 P4594 LB G P25005 P2500 P2502 P2504 P2506 LB G P25505 P2550 P2552 P2554 P2556 P25040 P25042 P25046 P25048 P25052 P25054 P25058 P25060 P25064 P25068 P25074 P25076 P25078 P25082 P25090 P25092 P25094 P25540 P25542 P25546 P25548 P25552 P25554 P25558 P25560 P25564 P25568 P25574 P25576 P25578 P25582 P25590 P25592 P25594 Add P Suffix to P/N for Liquid Filling with Glycerine, add PI for Silicone. NOTE: Lower back mount Gauges are not fillable 800-727-5646 www.marshbellofram.com NOTE: Items are available on special order. However, minimums and lead times apply. Consult factory. buy gauges on-line!
Process Gauges Turret Panel ounting Holes.22 Size A B C D E F G H J 4 5.00 3.3.3 4.28.53 4.3 5.38 5.85.27 TURRET CASE Front Flanged Panel ounting Holes.23 Size A B C G H J 4 6.3.3.8 5.38 4.88.63.50 FRONT FLANGE CASE Back Flanged Size A B C D E G H J 23 4 4.94 2.88.9 4.28.50 5.38 5.78.27.23 6" 6.63 2.88.9 4.97.50 7.00 7.50.27.28 part of the process! BACK FLANGE CASE 3 800-727-5646 www.marshbellofram.com 3
Process Gauges PROCESS GAUGE OPTIONS ALUINU CASE Dial Divisions Ranges Vacuum COPOUND 30" Hg VAC to 5 30" Hg VAC to 30 30" Hg VAC to 60 30" Hg VAC to 50 30" Hg VAC to 300 PRESSURE 0 to 5 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 HIGH PRESSURE 0 to,000 0 to,500 0 to 2,000 0 to 3,000 0 to 4,000 0 to 5,000 0 to 6,000 0 to 0,000 0 to 5,000 0 to 20,000 32 32 Process Gauge Series P 0.5% of Span inor Figure GraduaIntervals tions 3 0.2 5 3 0 5 0.5 0 0 0.5 30 30 2 30 30 5 2 OPTION Restrictors Fill edium Add restrictor Glycerin (GL) Silicone option (SL) bar only kg/cm2 only H P PI L L2 kpa only & bar L3 W W2 Catalog Dials 0.5 0.2 Window Cases Custom Dials 5 5 0 20 20 50 50 50 0. 0.2 0.5 2 2 2 5 00 300 200 500 500 500,000,000 3,000 2,000 0 0 20 20 20 50 50 00 00 200 & kg/cm2 & kpa & Pa Instrument Glass (GS) Safety Glass (SG) Phenolic Turret (PH) 4 Steel Case ( or LB) 6" Hinged Ring Steel Case with U-Clamp Logo or Custom Face SUFFIX AVAILABLE ON ODELS All ranges 4 Lower ount only (all ranges) 4 Lower ount only (all ranges) See arsh Price List for minimum W3 W4 F F3 J J J 4 & 6" 4 & 6" 4 4 (Adjustable pointer only) 6" (Adjustable pointer only) Consult factory for colors and minimums. NOTE: 4 Lower back mount, 6" Lower mount and 6" Lower back are not fillable (only available dry). 800-727-5646 www.marshbellofram.com buy gauges on-line!
Dial Sizes: 2, 3, 4 Four Case Styles Accuracy: ASE B40. - 2//2% Diaphragm Gauges arsh Instruments Low Pressure Diaphragm Gauges are universally known for their dependable performance and accuracy. Incorporating a unique design feature, the diaphragm element allows accurate low pressure readings in a variety of applications. Featuring a bronze diaphragm element, the gauge is capable of ASE Grade A-% accuracy for ranges above 30" of water. Ranges are available in vacuum and pressure in inches of water, ounces per square inch and millimeters of mercury. STANDARD & PART NUBERS DIAPHRAG GAUGES Size 2 3 4 Pressure Element Phosphor Bronze Dual Standard Scale /kpa Case U U CB CB FF ounting 8" 8" 8" 0 to 0" H 2 0 G22675 G227 G8 G248 G22747 G270 G578 G24608 G25756 0 to 5" H 2 0 G24500 G24503 G246 G33 G26504 G30237 G642 G2463 G2598 0 to 30" H 2 0 G22704 G22740 G89 G256 G22776 G652 G586 G24625 G25749 0 to 60" H 2 0 G22705 G2274 G208 G34 G22777 G67 G605 G24626 G25844 0 to 00" H 2 0 G22687 G22723 G27 G284 G22759 G675 G609 G2463 G25982 0 to 60" H 2 0 G22695 G2273 G232 G299 G22767 G695 G628 G2467 G25980 0 to 200" H 2 0 G22696 G22732 G233 G300 G22768 G696 G2468 G2602 0 to 300" H 2 0 G22697 G22733 G236 G303 G22769 G699 G2469 G25755 0 to 3 G22685 G2272 G25 G282 G22757 G678 G62 G2462 0 to 5 G22702 G22738 G0623 G30 G22774 G2280 G069 G24624 G2608 0 to 0 G22699 G22735 G239 G306 G2277 G702 G635 G2462 G25754 0 to 0 oz/in 2 G22677 G2273 G86 G253 G22749 G649 G583 G24609 0 to 5 oz/in 2 G22680 G2276 G94 G26 G22752 G657 G59 G2460 G25753 0 to 30 oz/in 2 G2450 G206 G273 G24504 G669 G603 G24632 G25750 0 to 60 oz/in 2 G22684 G22720 G23 G280 G22756 G676 G60 G246 G25757 0 to 00 oz/in 2 G2269 G22727 G226 G293 G22763 G622 G2465 G26025 0 to 60 oz/in 2 G26062 G237 G304 G700 G633 G26894 8.75 oz/in 2 and 5" H 2 0 G22706 G22742 G85 G252 G22778 G648 G582 G24627 20 oz/in 2 and 35" H 2 0 G22709 G22745 G200 G267 G2278 G663 G597 G24629 G25748 32 oz/in 2 and 55" H 2 0 G22707 G22743 G95 G262 G22779 G658 G592 G24628 G25984 58 oz/in 2 and 00" H 2 0 G2270 G22746 G24 G28 G22782 G22947 G6 G24630 0 to 5" H 2 0 VAC G2292 G873 G906 G22942 G204 G207 G24708 G26023 0 to 30" H 2 0 VAC G2294 G29804 G876 G909 G22944 G207 G2074 G24709 G26020 0 to 60" H 2 0 VAC G2298 G884 G97 G22948 G25 G2082 G2470 G26020 0 to 00" H 2 0 VAC G24502 G26962 G885 G98 G22949 G26 G2083 G2476 G2606 0 to 200" H 2 0 VAC G2292 G892 G925 G2295 G223 G2090 G247 G2609 NOTE: Items are available on special order. However, minimums and lead times apply. Consult factory. DIAPHRAG GAUGE SPECIFICATIONS For ranges 30" H 2 0 & above: ASE Grade A = ±2//2% (±% of range across middle half of scale). For ranges below 30" H20: ±3//3% (±% of range across middle half of scale) CASE SIZES 2, 3, 4 diameter CASE ATERIAL Drawn steel pretreated for rust resistance and black enamel finish CASE STYLE Lower ount CB Center Back ount UC U-Clamp ount FF Three-holed Front Flanged ount DIAPHRAG & SOCKET Phosphor bronze diaphragm soft-soldered to brass socket OVEENT Brass sector and pinion with polycarbonate top & bottom plates CONNECTION 8" & NPT DIAL STANDARD Dual Scale with kpa Triple Scale: oz/in2, in H 2 0, & kpa Aluminum, black painted 2 & 3 : twist-on Clearlok acrylic window. 4 : flat acrylic window with steel friction ring RESTRICTOR 0.03" standard. No restrictor on 0 to 0" H2O range part of the process! 33 800-727-5646 www.marshbellofram.com 33
Diaphragm Gauges DIAPHRAG GAUGE OPTIONS OPTION Window Restrictors Acrylic (knurled edge).008 Restrictor.06 Restrictor.08 Restrictor.025 Restrictor Press ring, chrome Glass & Black Steel Ring Stainless Steel Brass Chrome plated Center Back (CB) U-Clamp (UC) Hose Barb ( 8" OD & OD) Vacuum & Pressure with front zero adjustment Logo or custom face Ring Ring / Window Cases 3 Case DIAPHRAG GAUGE SERIES G Connections Compound Ranges Custom Dials Center Back Back Flanged 34 34 SIZE 2 3 4 A 2.63 3.69 4.78 B.50.59.47 D 2.9 2.72 3.38 E.38.38.8 Front Flanged 800-727-5646 www.marshbellofram.com SUFFIX AVAILABLE ON ODELS Size 2 3 size 2 3 A 2.63 3.69 B.50.59 A 3.47 4.75 all models all models 2 to 3 Panel ount 2 to 3 all models 2 - Panel ount 2 - Lower ount or Centerback Lower ount or Centerback 3 3 All models (0 pc. minimum) All models (0 pc. minimum) C.84.84 B.25.25 Consult factory for colors and minimums. U-Clamp C.84.84 G 3.03 4.4 Size 2 3 H 2.59 3.66 A 2.63 3.69 B.25.69 C.84.84 H 2.59 3.66 Panel tg. Holes.6.22 buy gauges on-line!
Diaphragm Gauges VACUU CLEANER TEST GAUGE Includes 2 dial size gauge Dual Scale: in. H 2 0 & kpa vacuum Complete with rubber plug to fit vacuum cleaner intake opening Type 82K Range Part No. 0 to 60" H20 G32426 0 to 00" H20 G24505 0 to 60" H20 G25759 0 to 200" H20 G26098 VACUU CLEANER TEST GAS PRESSURE TEST SET Includes 2 dial size gauge Triple Scale: Oz./in 2, in. H 2 0 & kpa Provided in grey polyethylene case with 3 ft. of rubber tubing Type 84K Range Part No. 0 to 8.75 oz/in 2 0 to 5" H20 G2845 0 to 20 oz/in 2 0 to 35" H20 G24507 0 to 58 oz/in 2 0 to 00" H20 G27038 GAS PRESSURE TEST part of the process! 35 800-727-5646 www.marshbellofram.com 35
HVAC/R Gauges Recalibrator and Restrictor Standard Heavy Duty Brass Case Clam Shell Packaging Optional arsh Instruments Deluxe Serviceman Test Gauge is designed to assure the modern serviceman the best possible gauge for testing refrigeration equipment. Corresponding, easy-to-read temperature scales for R-2, R-22 or R-502 are printed in red on the inner arcs of the dial face. STANDARD & PART NUBERS SERVICEAN TEST GAUGE SPECIFICATIONS ASE Grade B - ±3/2/3% (±2% of range across middle half of scale) CASE SIZE 2 diameter CASE ATERIAL Polished brass CASE STYLE Lower ount Copper Alloy OVEENT Brass sector and pinion with recalibrator CONNECTION 8" NPT 0-500, 30" Hg VAC to 20 retarded to 350 DIAL STANDARD with corresponding temperature scales with red temperature scales Aluminum, black painted Beveled glass PACKAGING Optional clam shell packed gauges are on 4 x 6 5 8" cards, prepunched for pegboard hanging 36 36 SERVICEAN S TEST GAUGE Size ounting Connection (NPT) Case aterial Internals Scale 30" X 350 30" X 350 0 to 500 0 to 500 Set of (2) W0070 & W0072 30" X 350 30" X 350 0 to 500 0 to 500 2 8" Brass Copper Alloy Temperature & Pressure W0070 W0070Q W0072 W0072Q W0074 W8070 W8070Q W8072 W8072Q 800-727-5646 www.marshbellofram.com R-2, 22, 502 R-2, 22, 502 R-2, 22, 502 R-2, 22, 502 R-2, 22, 502 R-34a, 404A, R-34a, 404A, R-34a, 404A, R-34a, 404A, 507 507 507 507 Carton Clam Shell Carton Clam Shell Carton Only Carton Clam Shell Carton Clam Shell buy gauges on-line!
Recalibrator and Restrictor Standard Color Coded Cases, Reds & Blues Overpressure Protection to 350 arsh Instruments anifold Gauges are used in refrigeration applications for testing, servicing, and recharging AC Systems. Dials feature R-2, R-22, and R-502. HVAC/R Gauges STANDARD & PART NUBERS HIGH-SIDE & LOW-SIDE ANIFOLD GAUGES Size 2 ounting Connection (NPT) 8" Case aterial Steel Internals Copper Alloy Scale Temperature & Pressure 30" X 350 W00 R-2, 22, 502 Blue Carton 30" X 350 W00Q R-2, 22, 502 Blue Clam Shell 0 to 500 W0023 R-2, 22, 502 Red Carton 0 to 500 W0023Q R-2, 22, 502 Red Clam Shell 30 X 350 W80 R-34a, 404A & 507 Blue Carton 30 X 350 W80Q R-34a, 404A & 507 Blue Clam Shell 0 to 500 W8023 R-34a, 404A & 507 Red Carton 0 to 500 W8023Q R-34a, 404A & 507 Red Clam Shell ANIFOLD GAUGE SPECIFICATIONS ASE Grade B - ±3/2/3% (2% of range across middle half of scale) CASE SIZE 2 diameter CASE ATERIAL Drawn steel, pretreated for rust resistance, red or blue enamel finish Copper alloy OVEENT Brass sector and pinion with recalibrator CONNECTION 8" NPT 0-500, 30" Hg VAC to 20 retarded to 350 DIAL STANDARD with corresponding temperature scales with red temperature scales Aluminum, black painted Impact resistant plastic PACKAGING Optional clam shell packed gauges are on 4 x 6 5 8" cards, prepunched for pegboard hanging part of the process! 37 800-727-5646 www.marshbellofram.com 37
HVAC/R Gauges Range 30" Hg to 50 or 300 Case Sizes: 63mm and 3 ASE Grade B arsh Refrigeration Ammonia Gauges are designed for use on ammonia compressors and other ammonia refrigeration equipment. arsh Ammonia Gauges include a restrictor that protects the gauge against sudden shock or pulsating pressure. The inner dial arc shows pressure (/kpa), outer arc shows the corresponding temperature scale. arsh Refrigeration Ammonia Gauges are available in plain stainless steel case. STANDARD & PART NUBERS REFRIGERATION AONIA SPECIFICATIONS ASE Grade B ±3/2/3% (±2% of range across middle half of scale) CASE SIZES 63mm and 3 diameter CASE ATERIAL 304 Stainless steel CASE STYLE Lower ount Stainless steel OVEENT Brass sector and pinion CONNECTION NPT Compound 30" Hg Vac to 50 or 30" Hg Vac to 300 DIAL STANDARD Dual scale and kpa with corresponding Ammonia temperature scales Aluminum, black painted Polycarbonate RESTRICTORS Standard PACKAGING Optional clam shell packed gauges are on 4 X 6 5 8" cards, prepunched for pegboard hanging 38 38 REFRIGERATION AONIA HVAC/R GAUGES Case aterial Internals Size ounting / Case Style Connection (NPT) 30" Hg VAC to 50 30" Hg VAC to 50 30" Hg VAC to 300 30" Hg VAC to 300 Stainless Steel Stainless Steel 63mm W004 W004Q W008 W008Q NOTE: 3 W02 W06 Items are available on special order. However, minimums and lead times apply. Consult factory. REFRIGERATION AONIA GAUGE OPTIONS OPTION Fill edium Glycerin (GL) Silicone (SL) Custom Dials Logo or Custom face 800-727-5646 www.marshbellofram.com SUFFIX P All odels PI All odels Consult factory for colors and minimums buy gauges on-line!
Color Coded Dial Adjustable Pointer Standard HVAC/R Gauges arsh Refrigeration Gauges are designed specifically for use on refrigeration systems. Gauges are sturdily constructed and tested to give long, continuous, accurate service. In addition to the standard pressure or compound scale, dials also show the corresponding temperature scales for R-2, R-22, and R-502, in the various combinations shown in the chart below. Dial markings are sharp, clear and easy to read. Pressure and vacuum scales are printed in red. STANDARD & PART NUBERS REFRIGERATION GAUGES Case aterial Plain Case Size 2 3 Connection (NPT) 8" ounting R-2 30" Hg VAC 50 W0002 W0030 0 to 300 W006 W0034 R-22 30" Hg VAC to 50 W0032 R-2 & R-22 30" Hg VAC 50 W0004 30" Hg VAC 300 W002 0 to 300 W008 NOTE: Items are available on special order. However, minimums and lead times apply. Consult factory. REFRIGERATION GAUGE SPECIFICATIONS ASE Grade B ±3/2/3% (2% of range across middle half of scale) CASE SIZES 2 and 3 diameter CASE ATERIAL Drawn steel, pretreated for rust resistance, black enamel finish CASE STYLE Lower ount Copper alloy OVEENT Brass sector and pinion CONNECTION 8" or NPT Compound 30" Hg Vac to 50, 30" Hg Vac to 300, 0 to 300 DIAL STANDARD with corresponding temperature scales with red temperature scales Aluminum, black painted, Adjustable Acrylic Clearlok RESTRICTORS Standard OPTIONS Consult factory part of the process! 39 800-727-5646 www.marshbellofram.com 39
HVAC/R Gauges 4 Dial Polished Stainless Steel Case Adjustable Pointer % Accuracy arsh Instruments Contractor s HVAC Service Gauge is a newly redesigned gauge with a long-life movement to meet the needs of contractors in air conditioning, heating, plumbing and refrigeration. This rugged and reliable gauge is economically priced and offers many features normally found on more expensive gauges such as adjustable pointer, acrylic lens and polished stainless steel case. STANDARD & PART NUBERS CONTRACTOR S GAUGE W CONTRACTOR S HVAC GAUGES SPECIFICATIONS Size Internals ounting / Case Style Connection (NPT) Case aterial 30" Hg VAC to 30 30" Hg VAC to 60 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 600 4 Copper Alloy Polished Stainless Steel W0480 W0487 W048 W0483 W0484 W0486 W0488 W0490 W0492 ASE Grade A ±2//2% (% of range across middle half of scale) CASE SIZE 4 diameter CASE ATERIAL Polished stainless steel CASE STYLE Lower ount Copper alloy OVEENT Brass sector and pinion CONNECTION NPT Compound 30" Hg Vac to60 ; 30 to 600 DIAL STANDARD Single scale Aluminum, black painted, adjustable Acrylic 40 40 CONTRACTOR GAUGE OPTIONS OPTION Restrictors Push Fit.008 or.08 Catalog dials and kpa All other dials - consult factory for lead time 800-727-5646 www.marshbellofram.com SUFFIX AVAILABLE ON ODELS H W3 all models all models 25 Piece minimum buy gauges on-line!
Adjustable Set Hand Ranges to 300 and 690 Feet of Water 3 and 4 Dials arsh Instruments Heating System Gauges provide accurate and feet-of-water measurements in elevated tanks, reservoirs, standpipes, and similar applications where reliability and dependability are crucial in heating system equipment. HVAC/R Gauges STANDARD & PART NUBERS HEATING SYSTE HVAC/R GAUGES Size 3 4 ounting / Case Style Connection (NPT) 0 to 30 ft H20 W0456 0 to 70 ft H20 W0450 W0457 0 to 00 and 0 to 230 ft H20 W045 W0458 0 to 50 and 0 to 345 ft H20 W0459 0 to 60 and 0 to 370 ft H20 W0452 0 to 200 and 0 to 460 ft H20 W0453 0 to 300 and 0 to 690 ft H20 W0454 W0460 NOTE: STOCK OPTIONS Items are available on special order. However, minimums and lead times apply. Consult factory. OPTION SUFFIX AVAILABLE ON ODELS Restrictors Special Restrictor H All models Custom Dials Logo or Custom face Consult factory for colors and minimums HEATING SYSTE SERIES W SPECIFICATIONS 3 ASE Grade B ±3/2/3% (2% of range across middle half of scale) 4 ASE Grade A ±2//2% (% of range across middle half of scale) CASE SIZE 3 and 4 diameter CASE ATERIAL 3 : Drawn steel pretreated for rust resistance, black enamel finish 4 : Aluminum back flange case, black enamel finish CASE STYLE Lower ount Copper alloy OVEENT 3 : Brass sector & pinion 4 : Stainless steel CONNECTION NPT Single Scale 30 to 70 ft. H 2 0 Dual Scale 00 to 300 and 230 to 690 ft. H 2 0 DIAL STANDARD, ft. H 2 O and metric Aluminum, black painted with red set hand 3 : Acrylic Clearlok 4 : Instrument Glass part of the process! 4 800-727-5646 www.marshbellofram.com 4
Special Applications Polished Brass Case Dials arked AIR / WATER UL Listed and F Approved arsh Sprinkler Gauges offer outstanding dependability, and value. The arsh Sprinkler Gauge is available in both dial ranges, 0 to 300, and 0 to 80 retarded to 250. Both ranges are available with the dial marked AIR or WATER for instant line identification by inspection and maintenance personnel. STANDARD & PART NUBERS SPRINKLER GAUGE SPECIFICATIONS ASE Grade B ±3/2/3% (±2% of range across middle half of scale) CASE SIZES 3 diameter CASE ATERIAL Polished brass CASE STYLE Lower ount Copper alloy OVEENT Brass CONNECTION NPT 0 to 300 and 0 to 80 Retard to 250 DIAL STANDARD Dual scale and kpa All dials are marked AIR/WATER Aluminum, black painted Impact resistant plastic 42 42 SPRINKLER GAUGES Size ounting / Case Style Connection (NPT) Internals Case aterial 0 to 300 WATER 0 to 80/250 (Retard) AIR 3 Copper Alloy Brass W040 W043 SPRINKLER GAUGE OPTIONS OPTION Custom Dials Logo or Custom face 800-727-5646 www.marshbellofram.com SUFFIX AVAILABLE ON ODELS Consult factory for colors and minimums buy gauges on-line!
Connects Directly to Standard Water Faucet or Hose easures Commercial & Residential Water Pressure Dual Scale Dial is Standard arsh Water Test Gauge is designed to connect directly to a standard 3 water faucet or hose. It is used to measure residential and commercial water pressure, also for selection and adjustment of valves, regulators, and other controls. Special Applications STANDARD & PART NUBERS WATER TEST GAUGE Size 2 Connection Top hosebib Range 0-300 & kpa Part Number G24545 WATER TEST GAUGE SPECIFICATIONS ASE Grade B ±3/2/3% (±2% of range across middle half of scale) CASE SIZES 2 diameter CASE ATERIAL Drawn steel case with baked black enamel finish CASE STYLE Top mount Copper alloy OVEENT Brass sector and pinion with CONNECTION 3 NH Female hosebib 0 to 300 DIAL STANDARD Dual scale and kpa Aluminum, black painted Acrylic OPTIONS Other ranges are available - 25 piece minimum, Consult factory part of the process! 43 800-727-5646 www.marshbellofram.com 43
Special Applications Hinged Ring Chrome Plated Steel Case Protective Weather Tight Seal Restrictor is Standard arsh Instrument Chrome Plated Paper achine Gauges are available in nine ranges and fit existing panel cutouts. The heavy duty case features a front flanged/ hinged ring design which allows easy access to the recalibrator and a weephole that prevents condensation buildup. A restrictor is standard. The arsh Paper achine Gauge is available in 3 size only. Each gauge has a weather-tight seal to protect against dust and atmospheric contaminates. STANDARD & PART NUBERS PAPER ACHINE GAUGES SPECIFICATIONS ASE Grade A ±2//2% (±% of range across middle half of scale) CASE SIZES 3 diameter CASE ATERIAL Chrome plated steel CASE STYLE LB Lower Back ount Copper alloy OVEENT Stainless Steel with recalibrator CONNECTION NPT 30 to,000 DIAL STANDARD Single scale Aluminum, black painted Glass lens, chrome plated brass ring with weather-tight seal RESTRICTOR Standard 44 44 PAPER ACHINE GAUGES Size ounting / Case Style Internals Connection (NPT) Scale Standard 0 to 30 0 to 60 0 to 00 0 to 60 0 to 200 0 to 300 0 to 400 0 to 600 0 to,000 3 LB Copper Alloy W6042 W6046 W6048 W6052 W6054 W6058 W6060 W6064 W6072 PAPER ACHINE GAUGE OPTIONS OPTION Restrictor Special Restrictor No restrictor Catalog Dials Custom Dials SUFFIX AVAILABLE ON ODELS H H L L2 bar only kg/cm2 only kpa only & bar & kg/cm2 L3 W W2 & kpa & Pa Logo or custom face W4 See arsh Price List for minimum W3 Consult factory for colors and minimums Paper achine Gauge Dimensions 800-727-5646 www.marshbellofram.com buy gauges on-line!
Accuracy ±% Polished Stainless Steel Case Ranges to 0,000 Adjustable icrometer Pointer arsh Instruments has been on top of Xmas Trees and well-heads much longer than any other name. arsh offers the same high-performance gauge for replacement. Other gauge manufacturers can state Xmas Tree Gauge on their products but only arsh Instruments can offer you all the special features, and dependability, that you expect! Features include a polished stainless steel case with stainless steel tube, tip, and socket, and an easy to adjust micrometer pointer. Special Applications STANDARD & PART NUBERS X-TREE GAUGE Size 4 ounting / Case Style Connection (NPT) Case aterial Stainless Steel Internals Stainless Steel Scale Standard 0 to,000 W0574 0 to,500 W0578 0 to 2,000 W0582 0 to 3,000 W0586 0 to 5,000 W0590 0 to 0,000 W0594 X-AS TREE GAUGE SPECIFICATIONS ASE Grade A ±% (±% of range across full scale) CASE SIZES 4 diameter CASE ATERIAL Polished stainless steel CASE STYLE Lower ount with blowout plug Stainless Steel OVEENT Stainless Steel CONNECTION NPT,000 to 0,000 DIAL STANDARD Single scale Aluminum, adjustable micrometer, black painted & RING Acrylic window with bayonet ring part of the process! 45 800-727-5646 www.marshbellofram.com 45
Parts & Accessories PART# DESCRIPTION PART# DESCRIPTION FRONT FLANGE (3-HOLE) CASE & ASS Y FOR BACK CONNECT (CB) J Series Gauge CS25FF 2 Front Flange Case W25CLUC 2 Window Assembly CS35FF 3 Front Flange Case W35CLUC 3 Window Assembly GAUGE COCK AND SYPHONS F x F Brass Gauge Cock (T-Handle #23) union x F Brass Gauge Cock (Lever Handle #25) x Steel Straight Syphon (600 @ 400 F) x Brass Straight Syphon (250 @ 400 F) x Steel Angle Type Syphon (600 @ 400 F) x Brass Angle Type Syphon (250 @ 400 F) 025 028 029 030 03 032 9-79999-93 27656 33426 LIQUID FILL CONVERSION KIT Liquid Fill Kit Silicone, 000 cs, quart Glycerin, quart CLEARLOK (ACRYLIC) CONVEX INTERNAL THREAD G Series Fig. 83 Diaphragm Gauges 24602 2 for 83K & 83KC 27985 2 for 83KB & 83KD 25448-00 3 for all models (knurled edge) CLEARLOK (ACRYLIC) S (INTERNAL THREAD) J SERIES W5CL for or CB W20CL 2" for or CB W20CLUC 2" for U-Clamp or Front Flange W25CL 2 for or CB W25CLUC 2 for U-Clamp or Front Flange W35CL 3 for or CB W35CLUC 3 for U-Clamp or Front Flange 006-008 006-03 006-06 RESTRICTOR SCREWS A) 8" & NPT Threaded Brass 8-40 AIR (.008) WATER (.03) OIL (.06) RES008BRLD RES03BRLD RES06BRLD RESTRICTOR SCREWS LARGE DIAL (D, E, H, & P) B) & NPT Threaded Brass 5 X 0.8 AIR (.008) WATER (.03) OIL (.06) RES08SSLD RESTRICTOR SCREWS LARGE DIAL (D, E, H, & P) C) & NPT Threaded 36 SST 5 X 0.8 All Apps. (.08) RES08PB RES03PB RES025PB RES040PB RESTRICTOR SCREWS SERIES J, W, & X D) 8", & NPT Push-In Brass Standard (.08) AIR (.03) WATER (.025) OIL (.040) RESTRICTOR SCREWS SERIES J, W, & X E) 8", & Push-In 36 SST RES08PBSS Standard (.08) 46 46 800-727-5646 www.marshbellofram.com AX. HAND ASSEBLY WITH THUB SCREW 28300-00 28300-004 28300-005 283-00 283-002 2" Steel Case (J) 2 Steel Case (J) 3 Steel Case (J&W) 3 Large Dial (H) 4 Large Dial (D, H, & P) 0983 0985 HAND JACK & DUPLEX HAND JACK Duplex Hand Jack/Driver Set Hand Jack (Pointer Remover) PTR20ADJ PTR25ADJ PTR35ADJ PTR45ADJ ADJUSTABLE (SLOTTED) Adjustable Pointer - 2" Adjustable Pointer - 2 Adjustable Pointer - 3 Adjustable Pointer - 4 PTRP45 PTRP60 ICROETER, LARGE DIAL SERIES 4 Dial (D, H & P) 6" Dial (D, H & P) buy gauges on-line!
PART# DESCRIPTION Parts & Accessories SEVERE SERVICE GAUGE ACCESSORIES 27794 Adapter ring, 63mm to 2 Flange63 Front Flange for 63mm: C Case Flange00 Front Flange for 00mm: C Case CERTIFICATION FORS 34476 aterial Certification 34477 Certificate of Conformance 34478 Certificate of Compliance 34479 Certificate of Origin 34480 Certificate of Calibration 3448 Certificate of Accuracy PART# DESCRIPTION EDIA AXIU PRESSURES INDUSTRIAL PRESSURE SNUBBERS S20BD /4" NPT, Brass Heavy Oil 0,000 PSI S20BE /4" NPT, Brass Water & Light Oil 0,000 PSI S20BG /4" NPT, Brass Air & Gases 0,000 PSI S20SD /4" NPT, 36SS Heavy Oil 5,000 PSI S20SE /4" NPT, 36SS Water & Light Oil 5,000 PSI S20SG /4" NPT, 36SS Air & Gases 5,000 PSI S40BD /2" NPT, Brass Heavy Oil 0,000 PSI S40BE /2" NPT, Brass Water & Light Oil 0,000 PSI S40BG /2" NPT, Brass Air & Gases 0,000 PSI S40SD /2" NPT, 36SS Heavy Oil 5,000 PSI S40SE /2" NPT, 36SS Water & Light Oil 5,000 PSI S40SG /2" NPT, 36SS Air & Gases 5,000 PSI part of the process! 47 800-727-5646 www.marshbellofram.com 47
Diaphragm Seals D Diaphragm seals are isolation devices which separate pressure gauges and other instruments from the process media while allowing the instrument to measure the process pressure. The service life of the instrument is greatly extended, because it is protected from corrosion, clogging, freezing, or pulsation. Liquid Fillings The selection of the fill depends on the temperature expected in any given application. Temperature ratings for available fillings are listed below. Glycerine 0 to 400ºF Silicone 40 to 600ºF Syltherm 40 to 750ºF 2000 DIAPHRAG SEAL ODEL 2000 INI SERVICEABLE RUBBER DIAPHRAG SEAL The odel 2000 Serviceable ini Diaphragm Seal is designed for gauges and instruments with operating pressure of 2500 with stainless and 500 with PVC models. Ideally suited for small applications and corrosive installations. The optional Easy Clean Out feature allows the removal of the process side housing without losing the instrument side fill fluid. Fill / bleed screw port in the instrument side housing, and stainless steel build screws are standard. FILLED AND CALIBRATED TO GAUGES ONLY. 2000 UPPER 36SS PVC ORDER CODES LOWER 36SS PVC ORDER CODES 22 24 52 54 The odel B8498 Gauge Protector is designed for extremely high volume displacement. Ideally suited for gauges and instruments with operating pressures up to 200 and vacuum applications. Available in 4 " threaded connections and chrome plated zinc construction. A 3 8" flush plug is standard in the process side housing. FILLED AND CALIBRATED TO GAUGES ONLY. 48 48 52 54 DIAPHRAG ORDER CODE Nitrile 3 Fluorocarbon 4 Neoprene 5 Teflon 6 EASY CLEAN OUT None Clean Out ODEL B8498 GAUGE PROTECTOR WITH RUBBER DIAPHRAG SEAL 22 24 FILL No Fill Glycerine Silicone Syltherm ORDER CODE 0 2 ORDER CODE 0 G S Y B8498 ASSEBLY ORDER CODES 22 DIAPHRAG ORDER CODE Nitrile 3 Fluorocarbon 4 Neoprene 5 FILL No Fill Glycerine Silicone Syltherm 800-727-5646 www.marshbellofram.com ORDER CODE 0 G S Y buy gauges on-line!
Diaphragm Seals 3000 ORDER UPPER CODES 36SS 22 ORDER LOWER CODES 36SS 22 /2" 24 Hastelloy 42 44.53".5" HEX ORDER DIAPHRAG CODE 36SS Hastelloy C 2 ORDER FILL CODE No Fill 0 Glycerine G Silicone S Syltherm Y.5" 3000 DIAPHRAG SEAL ODEL 3000 INI / ALL WELDED DIAPHRAG SEAL The odel 3000 ini Welded Seal is designed for 2" to 3 bourdon tube gauges with a minimum pressure of 60. The maximum operating pressure is 2000 at 00º F. Available in all 36 SS or Hastelloy C process housing and diaphragm. FILLED AND CALIBRATED TO GAUGES ONLY. 3040 ORDER UPPER CODES 36SS 22 24 ORDER LOWER CODES 36SS 22 24 3 26 " 28 Hastelloy 42 44 3 46 " 48 ORDER DIAPHRAG CODE 36SS Hastelloy C 2 FLUSH ORDER CONNECTION CODE None 0 2 ORDER FILL CODE No Fill 0 Glycerine G Silicone S Syltherm Y.66" 2.5" HEX 2.5" ODEL 3040 ALL WELDED DIAPHRAG SEAL The odel 3040 All Welded Seal is designed for 2" to 4 bourdon tube gauges with pressure ranges from vacuum to 000. Available in all 36SS or Hastelloy C process housing and diaphragm, with threaded connections. Optional flushing connections also available. FILLED AND CALIBRATED TO GAUGES ONLY. part of the process! 49 800-727-5646 www.marshbellofram.com 49
Diaphragm Seals 4000 4000 DIAPHRAG SEAL ODEL 4000 REOVABLE DIAPHRAG SEAL The odel 4000 Diaphragm Seal is a clamped metal design featuring interlocking construction inside of the bolt circle for perfect alignment. The upper and lower housings clamp the diaphragm in place and allow for field servicing. The 4000 is available in threaded connections for pressures vacuum to 2500. Fill/bleed port screw in the upper is standard and an optional flush connection is available. FILLED AND CALIBRATED TO GAUGES ONLY. UPPER ORDER CODES Steel 2 4 36SS 22 24 LOWER ORDER CODES Steel 2 4 3 6 " 8 36SS 22 24 3 26 " 28 ORDER DIAPHRAG CODE 36SS Hastelloy C 2 Tantalum 3 FLUSH ORDER CONNECTION CODE None 0 2 BOLTS & NUTS Steel Stainless 50 50 25/8" 3/2" PROCESS CONN ORDER CODE 0 FILL ORDER CODE No Fill 0 Glycerine G Silicone S Syltherm Y ODEL 4040 WELDED DIAPHRAG SEAL The odel 4040 Welded Diaphragm Seal is a welded diaphragmt o - u p p e r design allowing the upper housing to be removed with the instrument in place without losing fill. The same interlocking feature as the 4000 is used to assure alignment of the upper to the lower. Available in threaded connections for pressures vacuum to 2500. Fill/bleed port screw in the upper is standard and an optional flush connection is available. FILLED AND CALIBRATED TO GAUGES ONLY INST CONN 4040 UPPER ORDER CODES Steel 2 4 36SS 22 24 INST CONN 25/8" 3/2" PROCESS CONN 800-727-5646 www.marshbellofram.com LOWER ORDER CODES Steel 2 4 3 6 " 8 36SS 22 24 3 26 " 28 DIAPHRAG 36SS Hastelloy C Tantalum ORDER CODE 2 3 FLUSH CONNECTION None ORDER CODE 0 2 BOLTS & NUTS Steel Stainless ORDER CODE 0 FILL ORDER CODE No Fill 0 Glycerine G Silicone S Syltherm Y buy gauges on-line!