trend Architectural Hinge Selection Chart:

trend Architectural Hinge Selection Chart: EN Hinge Grade Trend Architectural Hinges are manufactured in Europe to EN1935:2002, several of these hinges are suitable on fire rated wooden and/metal doors. The above Design Loads are based on the use of 3 hinges per door, if 2 hinges are used the Design Load should be reduced by one third. Width of door leaf is also an important factor in determining the appropriate hinge. Should you need, our trained representatives will be happy to provide technical advice to our valued clients and specifiers for specific situations. Hinge Lubrication: Fitted to Door/Window Estimated Annual Operations Maximum Door Leaf Weight, Kg. 1 Window 10000 10 2 Window 10000 20 3 Window/Door 25000 20 4 Door 200000 20 5 Window 10000 40 6 Door/Window 25000 40 7 Door 200000 40 8 Window 10000 60 9 Door/Window 25000 60 10 Door 200000 60 11 Door 200000 80 12 Door 200000 100 13 Door 200000 120 14 Door 200000 160 It is recommended that hinges are lubricated immediately after installation with light machine oil and at six monthly intervals thereafter. In situations where a door is installed in a high frequency usages or harsh environmental conditions the hinges should be lubricated once in every three months or as needed Description & Illustrations: Every effort has been made to ensure accuracy of information and illustrations within this catalogue, however, company cannot accept any responsibility for claims arising from errors or omissions. Disclaimer: In the interest of product improvement, economies of scale, changes in market trends, customer requests or for any other reason company reserves the right to make any product changes or discontinuation of an item without prior notice to any individual, authority or organization. 28

Stainless Steel Ball Bearing Butt Hinges (Template drilled): Bearings 01-4001 4 x 3 x 3mm 2 SS, PS 01-4002 4 x 4 x 3mm 2 SS, PS 01-4003 4.5 x 4.5 x 3mm 2 SS, PS Stainless Steel Ball Bearing Security Hinges (Template drilled): Specification: Material: 304 grade stainless steel, As per Class 9, Suitable for 60 to 120 Kg weight doors. Bearings 01-4004 4 x 3 x 3mm 2 SS, PS 01-4005 4 x 4 x 3mm 2 SS, PS 01-4006 4.5 x 4.5 x 3mm 2 SS, PS Options: Other sizes and special finishes available on request. We also supply Stainless Steel Ball Bearing Hinges in 316 Grade Suitable for High Corrosion areas such as Marine environment, Food Industries and Chemical Industries. 29

Solid Brass Ball Bearing Butt Hinges: Bearings 01-4010 4 x 3 x 3mm 2 PB 01-4011 4 x 4 x 3mm 2 PB 01-4012 4.5 x 4.5 x 3mm 2 PB 01-4013 5 x 4 x 4mm 4 PB 01-4014 6 x 4 x 4mm 4 PB Solid Brass Ball Bearing Butt Hinges with Finials: Bearings 01-4015 4 x 3 x 3mm 2 PB 01-4016 4 x 4 x 3mm 2 PB 01-4017 4.5 x 4.5 x 3mm 2 PB 01-4018 5 x 4 x 4mm 4 PB 01-4019 6 x 4 x 4mm 4 PB 30 Specification: 3mm Hinge suitable for 60 to 80 Kg door and 4mm hinge suitable for 80 to 150 Kg door. Material: Solid brass hand polished and Stove Lacquered. Options: Other sizes and special finishes available on request

Solid Brass/Stainless Steel Butt Hinges with Double SS Washers: 01-4030 3 x 2 x 2mm PB, SS, PS 01-4031 4 x 3 x 3mm PB, SS, PS 01-4032 4 x 4 x 3mm PB, SS, PS Solid Brass Butt Hinges with Double SS Washers & Finials: Specification: 2mm Hinge suitable for 8 to 12 Kg doors and 3mm Hinge suitable for 45 to 60kg door. Material : Solid Brass hand polished and Stove Lacquered. And also in Stainless Steel. Options: Other sizes and special finishes available on request 01-4036 3 x 2 x 2mm PB 01-4037 4 x 3 x 3mm PB 01-4038 4 x 4 x 3mm PB 31

Stainless Steel Rising Butt Hinges (Self Closing Door): 01-4050 4 x 3 x 3mm SS, PS Stainless Steel Falling Butt Hinges (Keeps door open): 32 01-4051 4 x 3 x 3mm SS, PS Recommendation: Only 2 hinges per door (For cubicles). Specification: Suitable for 30 to 45 Kg doors. Material : 304 Grade Stainless Steel Options: Other sizes and special finishes available on request We supply Stainless Steel Rising/Falling Butt Hinges in 316 Grade Suitable for High Corrosion areas such as Marine environment, Food Industries and Chemical Industries.

Single Action Spring Hinges: A B C D E F G 01-4060 102(4 ) 40 16.5 23.5 24 12.5 5.5 SS, PS, PB 01-4061 127(5 ) 47.5 15.5 32 24 13.5 5.5 SS, PS, PB 01-4062 153(6 ) 51.5 16.5 35 24 14 5.5 SS, PS, PB Door Weight 01-4066 4 x 4 x 3mm 60 80kg SS, PS, PB (3 Pieces) Double Action Spring Hinges: Single Action Spring Hinges: A B C D E F G H 01-4063 102(4 ) 40 16.5 23.5 25 16.3 5.5 54.5 SS, PS, PB 01-4064 127(5 ) 47.5 15.5 32 25 17.5 5.5 64 SS, PS, PB 01-4065 153(6 ) 51.5 16.5 35 25 17.5 5.5 70.5 SS, PS, PB Recommendation: 3 hinges per door. Specification: Suitable for 25 to 40 Kg doors. Material : 304 Grade Stainless Steel 33

Lift Off Hinges with Washer: Washer 01-4070 4 x 3.5 x 3mm 1 SS, PS, PB 01-4071 5.5 x 3.5 x 3mm 1 SS, PS, PB Lift Off H Hinges: Washer 01-4072 4 x 2.8 (71.2) x 2mm 1 SS, PS, PB 01-4073 4 x 2.8 (71.2) x 2.5mm 1 SS, PS, PB 34 Specification: Material: 304 grade stainless steel, Solid brass, 2mm Hinge Suitable for 25 to 40Kg doors. 2.5mm Hinge Suitable for 40 to 60Kg doors. Options: Other sizes and special finishes available on request. We supply Stainless Steel Butt Hinges in 316Grade Suitable for High Corrosion areas such as Marine environment, Food Industries and Chemical Industries.

Solid Brass Parliament Hinges: Specification: Material: Solid Brass Polished & Lacquered. 4mm Hinges Suitable for 120 to 150Kg doors. Ball Bearing Flush Hinge: Ball Bearing Cranked Hinge: 01-4080 4 x 4 x 4mm PB, CP, NP 01-4081 4 x 5 x 4mm PB, CP, NP 01-4082 4 x 6 x 4mm PB, CP, NP 01-4083 4 x 7 x 4mm PB, CP, NP 01-4084 4 x 8 x 4mm PB, CP, NP 01-4090 4 x 2.9 (72.5)x 2.5mm PB, SS 01-4093 3.5 x 3 x 3mm PB, SS 01-4094 4 x 3 x 3mm PB, SS Specification: Material: 304 Grade Stainless Steel. Solid Brass Polished & Lacquered. 2.5mm Hinge Suitable for 40 to 60Kg doors. 3mm Hinge Suitable for 60 to 80Kg doors. Options: Other sizes and special finishes available on request. We supply Stainless Steel Ball Bearing Hinges in 316Grade Suitable for High Corrosion areas such as Marine environment, Food Industries and Chemical Industries. 35

Concealed Hinge: (MM) A B C D E F G 01-4100 9.53 7.14 25.40 9.53 1.59 11.91 5.96 BP, CP, SN 01-4101 9.53 7.54 42.86 22.23 1.59 11.51 5.56 BP, CP, SN 01-4102 12.7 9.13 44.45 19.05 1.59 18.26 4.76 BP, CP, SN 01-4103 12.7 9.13 60.33 31.75 1.59 18.26 6.53 BP, CP, SN 01-4104 15.8 11.51 69.85 34.13 1.59 23.02 7.14 BP, CP, SN 01-4105 19.05 13.49 95.25 52.39 1.59 27.38 9.53 BP, CP, SN 01-4106 25.4 18.26 117.48 65.88 1.59 36.51 11.91 BP, CP, SN 01-4107 28.58 22.23 117.48 61.91 1.59 40.48 10.32 BP, CP, SN 01-4108 34.93 26.99 139.70 74.61 1.59 49.21 11.91 BP, CP, SN Material: Zinc Alloy, Plated finishes to clients specification. Stainless Steel Piano (Continuous) Hinge: Solid Brass Piano (Continuous) Hinge: Solid Brass Counter Hinge: 01-4110 25.4 x 1830 x 1 SS, PS 01-4111 32 x 1830 x 1 SS, PS 01-4112 50.4 x 1830 x 1.2 SS, PS 01-4113 76 x 1830 x 1.2 SS, PS 01-4114 25.4 x 1830 x 1 SB, CP, PB 01-4115 32 x 1830 x 1 SB, CP, PB 01-4116 50.4 x 1830 x 1.2 SB, CP, PB 01-4150 70 x 30 x 2.5 PB 01-4151 38 x 102 x 2.5 PB 36 Material: Solid Brass Polished & Lacquered. Options: Other special finishes available on request