Compressor Recording Data Book

Similar documents
ARIEL CORPORATION WORLD STANDARD COMPRESSORS Blackjack Rd Mount Vernon, OH

ARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS Blackjack Rd Mount Vernon, OH

SYSTEM MAINTENANCE BASIC PREVENTIVE MAINTENANCE RECOMMENDATIONS

C-VIP. compressors. Every component of the VIP. frame is designed to provide. built-in reliability and simplicity.

XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS

Appendix B Specifications for Vertical Single-Acting Models

D-VIP. compressors. With several unique features, the D-VIP compressor is one of. the most versatile compressors. available today.

HD372A DISASSEMBLY SLIDES

Appendix D Outline Dimensions

MA-40M(L)(H) TRIPLEX PLUNGER PUMP

XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS

CNG COMPRESSORS. Fueling Natural Gas Vehicles

The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.

PRELIMINARY. Engine Speed Standby Power Prime Power Continuous Power. RPM kwm BHP kwm BHP kwm BHP. Litre / hour

Hydra-Cell T80 Series Pumps Design Advantages

FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.

Section 10 Chapter 20

T100 Series Low Pressure Models T100E, T100F & T100H

DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F

BSM ROTARY GEAR PUMPS

LX SERIES Low-Pressure Gas Compressors

BSM ROTARY GEAR PUMPS

Engine Performance 1500 RPM

VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS

T100 Series Low Pressure Models T100E, T100F & T100H

BUTTERFLY VALVE POWER-PACK CONTROLLED BUTTERFLY VALVE

SAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam

F-800 and F-1000 MUD PUMP Specification and Performance

TABLE OF CONTENTS DESCRIPTION PAGE

Frame and Running Gear Data: MOS

Frame and Running Gear Data: CVIP. A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP. Stroke (in.) Rod Diameter (in.)

Curve Number: FR Engine Critical Parts List: CPL 2893 Date: 19Jun00. Aspiration : Turbocharged and Aftercooled

T100 Series High Pressure

5" Submersible Turbine Pump 120 GPM

1013. The engine for construction equipment.

: see performance curve rev. A : suction 900 mm / discharge 700 mm

Series Low Pressure Steam Heating Boiler Safety Valves

5" Submersible Turbine Pump 220 GPM

Model Performance SW VersaJet. Shut-off PSI 118 Max. Lift 90 Conv. VersaJet Pro. Shut-off PSI 111 Max. Lift 90 Pro (RM2) Series

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit

PIPELINE INJECTION PRODUCTS

MA-155M(L)(H) TRIPLEX PLUNGER PUMP...

LB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools

1012. The engine for construction equipment kw at min -1

Toll-free: 1 (844) MAGISTER

BSM ROTARY GEAR PUMPS

NEBRASKA OECD TRACTOR TEST 1931A SUMMARY 603A CHALLENGER MT975B DIESEL ALSO CHALLENGER MT975C DIESEL 16 SPEED

Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer

T100 Series Medium Pressure Models T100K & T100M

2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)

MCGUIRE AIR COMPRESSORS INC HP RECIPROCATING BARE PUMPS. A-Series MCGUIRE AIR COMPRESSORS INC

See Note. 100% of rated load. Mechanical efficiency ISO3046/1 2,4,7 35.2% 34.8% 34.1% Electrical efficiency ISO3046/1 2,4,6,7 33.7% 33.4% 32.

See Note. 100% of rated load

SILI PUMP, Your reliable one-stop supplier of marine pumps.

PUMPS & FLUID ENDS. THE UNx ADVANTAGE UP TO 15,000 PSI (1000 BAR) FEATURES AND BENEFITS

Hydraulic gear pumps and motors

See Note. 100% of rated load

Dongfeng Cummins Techical Operations

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

Series Low Pressure Steam Boiler Safety Valves

See Note. 100% of rated load

See Note. 100% of rated load 2,4,6, (17.73)

Technical data TAD1242GE. General

Technical data TAD1241GE. General

LX-SERIES Low-Pressure Gas Compressors

LX SERIES Low-Pressure Gas Compressors

A company located in Cherasco (Italy), is among the world leaders in the field of designing and manufacturing of components and equipment for CNG and

.75 5 HP OIL-LESS RECIPROCATING AIR COMPRESSOR SYSTEMS. MTO II Series

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M

MITSUBISHI S16R-C2MPTK

High Temperature Air-Cooled Hot Oil Pumps

HORIZONTAL MULTI STAGE PUMPS

8L SERIES THREE SCREW PUMPS

MITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

High Temperature Chemical Process Inline Pumps

SPARE PART LIST LW 300 E & LW 450 E

P200 Pressure Regulator

NEBRASKA OECD TRACTOR TEST 1965 SUMMARY 662 CHALLENGER MT875C DIESEL 16 SPEED

WE WROTE THE BOOK ON MUD PUMPS.

PAS SIGMA PUMPY HRANICE PLUNGER PUMP

AMERICAN EAGLE COMPRESSOR AND ACCESSORIES CATALOG. Your Contact: Telephone:

2500 Prime 2100 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2

D09. 6 Advertised BHP 343 (460) 2100

VM / VML COMPONENT PARTS CATALOGUE

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS

NEBRASKA OECD TRACTOR TEST 1929A SUMMARY 601A CHALLENGER MT955B DIESEL ALSO CHALLENGER MT955C DIESEL 16 SPEED

T100 Series Medium Pressure Models T100K & T100M

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

HD and HDL Single-Stage Non-Lube Gas Compressors

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

Updated 26th September 2017

NEBRASKA OECD TRACTOR TEST 1835 SUMMARY 427 JOHN DEERE 7920 IVT DIESEL INFINITELY VARIABLE TRANSMISSION

M&H AWWA C508 STANDARD SWING CHECK VALVES

PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX

Transcription:

Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com

HEADQUARTERS Business...740.397.0311 ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY Fax...740.397.3856 US/Canada...888.397.7766 Web...www.arielcorp.com International..+1 740.397.3602 Gas Gathering, Process Gas, Pipeline, Gas Storage, CNG, and every other gas compression application FROM WELLHEAD TO BURNER, ARIEL EQUALS COMPRESSION CONVERSIONS AREA... in 2 x 0.00064516 = meter 2, or m 2... in 2 x 6.4516 = centimeter 2, or cm 2 FLOW GAS... MMSCFD x 0.310 = N m 3 /sec... SCFM x 1.608 = N m 3 /hr... N m 3 /hr x 1116.65 = MMSCFD FLOW LIQUID... GPM x 0.0630902 = L/s = dm 3 /s... GPM x 0.227125 = m 3 /h FORCE... Ibf x 4.44822 = N HEAT... BTU x 1.05506 = kj LENGTH... in x 25.4000 = mm... ft x 0.304800 = m MASS... lb x 0.453592 = kg TORQUE... LB x FT x 1.35583 = Nm... LB x IN x 0.112985 = Nm PISTON SPEED... (PS = 2*stroke*RPM) / 12 *PS = average piston speed, feet per minute POWER... HP x 0.745700 = kw PRESSURE... psi x 6894.757 = Pa... Pa x 0.000145 = psi... psi x 6.894757 = kpa... kpa x 0.145 = psi... bar x 100,000 = Pa... Pa x 0.00001 = bar... bar x 100 = kpa... kpa x 0.01 = bar... psi x 68.94757 = mbar... mbar x 0.0145 = psi... psi x 0.06894757 = bar... bar x 14.5 = psi SPEED... FPM x 0.005080 = m/s... RPM /60 =rev/s TEMPERATURE... ( F - 32) / 1.8 = C... ( C x 9/5) + 32 = F VOLUME... gal x 3.78541 = L

ARIEL CORPORATION 740-397-0311 ATP-001 07/2014 JGM/JGP JGN/JGQ JG/JGA JGR JGJ Number of Throws 1, 2 1, 2 2, 4/2, 4, 6 2, 4 2, 4, 6 Stroke (inches) 3.5/3.0 3.5/3.0 3.5/3.0 4.25 3.5 RPM 1500/1800 1500/1800 1500/1800 1200 1800 HP/Throw 85 126/140 126/140 215 310 Rod Load (lbs) Total 12,000 18,000/20,000 32,000 42,000 Tension 6,000 9,000/10,000 16,000 21,000 Compression 7,000 10,000/11,000 20,000 23,000 Main Diameter 3.250 3.250 4.125 Crankshaft Forged Steel Forged Steel Connecting Rod Ductile Iron Forged Steel Crosshead Gray Iron Ductile Iron Crosshead Bushing N/A Bronze CRod Length 8.250 10.250 Rod Diameter 1.125 1.500 Frame Use Same frame Same Same frame ARIEL CORPORATION www.arielcorp.com JGH JGE JGK/JGT JGC/JGD/JGF KBZ/KBU KBV/KBB Number of Throws 2, 4 2, 4, 6 2, 4, 6 2, 4, 6 2, 4, 6 4, 6 Stroke (inches) 4.5 4.5 5.5/4.5 6.5/5.5/5.0 6.75/5.75 8.5/7.25 RPM 1200 1500 1200/1500 1000/1200/1400 1000/1200 750/900 HP/Throw 340 535 635/650 1035 1300 1667 Rod Load (lbs) Total 48,000 60,000 74,000 114,000 150,000 190,000 Tension 24,000 30,000 37,000 57,000 75,000 95,000 Compression 30,000 32,000 40,000 60,000 80,000 100,000 Main Diameter 5.625 5.625 5.625 7.125 8.0 9.125 Crankshaft Forged Steel Connecting Rod DI Forged Steel Crosshead Gray Iron Ductile Iron Crosshead Bushing N/A Bronze CRod Length 13.750 17.000 18.500 23.000 Rod Diameter 2.000 2.500 2.875 3.125 Frame Use Same frame Same Same Same

General Information Location Elevation Field Operator Phone STAGE INFORMATION Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Compressor Information Model F# Commision Date Cycle Time Frame Oil Cylinder Oil Driver Information Serial No. Rated RPM Actual RPM Rotation Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... DRIVE END AUX END Gas Information % CO 2 %H 2 S Specific Gravity Flow Total Rod Load F# = Frame Serial Number C = Cylinder Serial Number U = Unloader/Pocket Serial Number KEY

Parts Book Location Key Parts Information NOTES: COMPRESSOR INFORMATION MODEL F#

General Information Location Elevation Field Operator Phone STAGE INFORMATION Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Compressor Information Model F# Commision Date Cycle Time Frame Oil Cylinder Oil Driver Information Serial No. Rated RPM Actual RPM Rotation Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... DRIVE END AUX END Gas Information % CO 2 %H 2 S Specific Gravity Flow Total Rod Load F# = Frame Serial Number C = Cylinder Serial Number U = Unloader/Pocket Serial Number KEY

Parts Book Location Key Parts Information NOTES: COMPRESSOR INFORMATION MODEL F#

General Information Location Elevation Field Operator Phone STAGE INFORMATION Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Compressor Information Model F# Commision Date Cycle Time Frame Oil Cylinder Oil Driver Information Serial No. Rated RPM Actual RPM Rotation Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... DRIVE END AUX END Gas Information % CO 2 %H 2 S Specific Gravity Flow Total Rod Load F# = Frame Serial Number C = Cylinder Serial Number U = Unloader/Pocket Serial Number KEY

Parts Book Location Key Parts Information NOTES: COMPRESSOR INFORMATION MODEL F#

General Information Location Elevation Field Operator Phone STAGE INFORMATION Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Compressor Information Model F# Commision Date Cycle Time Frame Oil Cylinder Oil Driver Information Serial No. Rated RPM Actual RPM Rotation Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... DRIVE END AUX END Gas Information % CO 2 %H 2 S Specific Gravity Flow Total Rod Load F# = Frame Serial Number C = Cylinder Serial Number U = Unloader/Pocket Serial Number KEY

Parts Book Location Key Parts Information NOTES: COMPRESSOR INFORMATION MODEL F#

General Information Location Elevation Field Operator Phone STAGE INFORMATION Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Compressor Information Model F# Commision Date Cycle Time Frame Oil Cylinder Oil Driver Information Serial No. Rated RPM Actual RPM Rotation Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... Inlet Temp... Inlet Pressure... Dis. Temp... Dis Pressure... DRIVE END AUX END Gas Information % CO 2 %H 2 S Specific Gravity Flow Total Rod Load F# = Frame Serial Number C = Cylinder Serial Number U = Unloader/Pocket Serial Number KEY

Parts Book Location Key Parts Information NOTES: COMPRESSOR INFORMATION MODEL F#

ARIEL RECIPROCATING COMPRESSOR Non-cooled Cylinders Heavy-duty crankshaft Precision bearings Easy access for inspection Non-metallic plate valve Discharge valve cap Cylinder lubrication system Ion-nitrided iron piston Full-pressure crankcase lubrication Crosshead Durable cast iron piston ARIEL COMPRESSOR CYLINDERS Valve retainer Suction nozzle flange Head end head Suction valves Ion-nitrided piston rods Piston Cylinder bore Discharge valves Guide gland (wiper rings) HEAD END Discharge nozzle flange Crank end head Piston rod packing CRANK END

ARIEL RESPONSE CENTER US/Canada...888.397.7766 International...+1 740.397.3602 Ariel Response Center...arc@arielcorp.com ARIEL CORPORATION 35 Blackjack Road Mount Vernon, OH 43050 www.arielcorp.com 03/2017 A-19131