Appendix B Specifications for Vertical Single-Acting Models
|
|
- Phoebe Hodges
- 5 years ago
- Views:
Transcription
1 Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections Features and Benefits Applications Bulk transfer Vapor recovery Tank evacuation Gas scavenging Self-lubricating piston rings: NPT or Class 300 RF connections: Multiple mounting configurations: High efficiency valves: Reversible oil pump: Simplified top down design: Non-lubricated operation to minimize oil in gas Quiet, reliable operation Allows operation in either direction Routine maintenance is minimally invasive Operating Specifications Model Bore of cylinder inches (mm) 3.0 (76.) 3.0 (76.) 4.0 (0.6) 4.5 (4.3) Stroke inches (mm).5 (63.5).5 (63.5) 3.0 (76.) 4.0 (0.6) Piston displacement cfm (m 3 /hr) 400 RPM 4. (7.0) 8. (3.9) 7.5 (9.7) 9.5 (50.0) 85 RPM 8.4 (4.3) 6.9 (8.7) 36.0 (6.) 60.7 (03.) Maximum working pressure psig (bar g) 335 (3.) Maximum brake horsepower (kw) 7.5 (5.6) 5 (.) 5 (.) 45 (33.6) Maximum rod load lb (kg) 3,600 (,63.9) 3,600 (,63.9) 4,000 (,84.4) 7,000 (3,75.) Maximum outlet temperature F ( C) 350 (77) Maximum flow propane gpm (m 3 /hr) 50 (.4) 0 (.9) 5 (48.8) 36 (8.0) These numbers specify pressure-containing abilities of the compressor cylinder and head. For many applications, factors other than the pressure rating will limit the maximum allowable discharge pressure to lower values. These factors include horsepower, temperature and rod load. 3
2 Appendix B Specifications for Vertical Single-Acting Models 9 69 Material Specifications Part Model Standard Material Head, Cylinder All Crosshead guide crankcase, flywheel, bearing carrier All Gray iron ASTM A48, Class 30 Flange 69 Valve seat and bumper Valve plate Valve spring 9, PH stainless steel PH stainless steel 9, 9 40 stainless steel PH stainless steel 69 PEEK 9, 9, PH stainless steel 49 Inconel Valve gaskets None Soft aluminum Piston All Gray iron ASTM A48, Class 30 Piston rod None 045 steel Nitrotec coated Crosshead All Gray iron ASTM A48, Class 30 Piston rings 9, 9, 49 PTFE, glass and moly filled 69 Alloy 50 Ring expanders All 30 stainless steel Packing cartridge, connecting rod All Packing V-rings 9, 9, 49 PTFE, glass and moly filled 69 Alloy 50 Crankshaft All Connecting rod bearing All Bimetal D- babbit Wrist pin All C08 steel Wrist pin busing All Bronze SAE J46 Main bearing All Tapered roller Inspection plate All Aluminum O-rings All Buna-N, Neoprene (optional) Retainer rings All Steel Misc. gaskets All Rubber compositions Registered trademark of TTI Group Ltd. Registered trademark of the DuPont company. 33
3 Appendix B Specifications for Vertical Single-Acting Models 9 89 Bolt Torque Values (in ft lb) Model Connecting rod bolt Bearing carrier Bearing cover Crankcase inspection plate Crosshead guide Cylinder to head, Valve cover plate bolt Valve holddown screw Piston locknut Piston screw Valve cap with gaskets Valve cap with O-rings Preliminary tightening snug all head bolts in the sequence shown. Final torqueing torque all head bolts in the sequence shown to the listed value. Retorque to the listed value after hour running time MODEL 89 34
4 Appendix B Specifications for Vertical Single and Double-Acting Models 9 89 Clearances and Dimensions for Single-Acting Models Model X piston clearance figure 5.4A and 5.4B Clearance from connecting rod bearing to crankshaft journal Clearance from wrist pin to wrist pin 6 bushing (M crankcase) Maximum cylinder bore diameter Cylinder finish (RMS) Minimum piston ring radial thickness Maximum clearance from oil pump adapter shaft to bushing N/A Crankshaft end play Maximum flywheel runout at O.D Maximum clearance from crosshead to crosshead guide bore Crosshead guide bore finish RMS (limited number of small pits and scratches are acceptable) Clearances and Dimensions for Double-Acting Models Model 89 X piston clearance figure 5.4A and 5.4B Clearance from connecting rod bearing to crankshaft journal 0.00/0.00 (bottom) 0.084/0.04 (top) Clearance from wrist pin to wrist pin 9 bushing Maximum cylinder bore diameter 4.55 Cylinder finish (RMS) 6 3 Minimum piston ring radial thickness 0.08 Maximum clearance from oil pump adapter shaft to bushing Crankshaft end play Maximum flywheel runout at O.D Maximum clearance from crosshead to crosshead guide bore Crosshead guide bore finish RMS (limited number of small pits and scratches are acceptable) Clearances should be set with machine cold. Dimensions for honing are included with new bushings (which must be installed, then honed). 35
5 Appendix B Specifications for Vertical Double-Acting Model D89/FD89 Equipment Type and Options Double-acting, vertical, reciprocating piston type vapor compressor Double packed rod Slip-on weld connections or Class 300 RF flanges Features and Benefits Applications Bulk transfer Truck, tank, railcar, barge unloading LTVR and scavenger applications Emergency evacuation Self-lubricating piston rings: Multiple materials and configurations: Multiple mounting configurations: High efficiency valves: Reversible oil pump: Simplified top down design: Non-lubricated operation to minimize oil in gas Quiet, reliable operation Allows operation in either direction Routine maintenance is minimally invasive Operating Specifications Model D89/FD89 Bore of cylinder inches (mm) 4.5 (4) Stroke inches (mm) 4.0 (0.6) Piston displacement cfm (m 3 /hr) 400 RPM 56.6 (96.) 85 RPM 6.8 (98.4) Maximum working pressure psig (bar g) 450 (3.0) Maximum brake horsepower (kw) 45 (34) Maximum rod load lb (kg) 7,000 (3,75.) Maximum outlet temperature F ( C) 350 (77) Maximum flow propane gpm (m 3 /hr) 694 (57.6) These numbers specify pressure-containing abilities of the compressor cylinder and head. For many applications, factors other than the pressure rating will limit the maximum allowable discharge pressure to lower values. These factors include horsepower, temperature and rod load. 36
6 Appendix B Specifications for Vertical Double-Acting Model D89/FD89 Material Specifications Part Standard Material Head, cylinder, and cylinder cap Crosshead guide Gray iron ASTM A48, Class 30 Crankcase, flywheel Gray iron ASTM A48, Class 30 Bearing carrier Gray iron ASTM A48, Class 30 Flange ASTM A36 carbon steel (D89 only) Valve seat, bumper 7-7 PH stainless steel Valve plate PEEK Valve spring 7-7 PH stainless steel Valve gaskets Soft aluminum Piston Piston rod 045 steel, Nitrotec Crosshead Piston rings PTFE, glass and moly filled Piston ring expanders 30 stainless steel Packing cartridge and barrel Connecting rod Segmented packing Carbon filled PTFE V-ring packing Alloy 50 Crankshaft Connecting rod bearing Bimetal D- SAE Wrist pin C08 steel or equivalent Wrist pin bushing Bronze SAE J46 Main bearing Tapered roller Inspection plate Aluminum O-rings Buna-N or Neoprene (optional) Retainer rings Steel Miscellaneous gaskets Rubber compositions Registered trademark of the DuPont company. 37
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
More informationLB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing
More informationDiscontinued Model parts availability may be limited.
COMPRESSORS CB-9E-020 1994/08 HD162A PARTS LIST Discontinued Model parts availability may be limited. Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 792598 FKM & Iron 792596 PTFE &
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More informationHD and HDL Single-Stage Non-Lube Gas Compressors
COMPRESSORS CB-324 2013/05 Ethylene Ethylene Oxide HCFC s Helium n-heptane n-hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene
More informationHD603C PARTS LIST. Gasket Set Buna-N & Iron FKM & Iron PTFE & Iron Neoprene & Iron Ethylene Propylene & Iron
COMPRESSORS CB-9E-152 2007/01 HD603C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 794594 FKM & Iron 794592 PTFE & Iron 794593 Neoprene & Iron 794590 Ethylene Propylene
More informationHD372C PARTS LIST COMPRESSORS CB-9E /12. Bulletins Needed For Complete Parts List. Gasket Sets and Special Tools
COMPRESSORS CB-9E-092 1995/12 HD372C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 793699 PTFE & Iron 793698 FKM & Iron 793697 Neoprene & Iron 793693 Ethylene Propylene
More informationHD612C PARTS LIST. Gasket Set Buna-N & Iron FKM & Iron PTFE & Iron Neoprene & Iron Ethylene Propylene & Iron
COMPRESSORS CB-9E-192 2007/01 HD612C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 794699 FKM & Iron 794697 PTFE & Iron 794698 Neoprene & Iron 794696 Ethylene Propylene
More informationMA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationquincy qsg series QuincyCompressor.com Made in the U.S.A. Performance You Demand. Reliability You Trust. options & Accessories Applications
QUINCY qsg SERIES rotary screw gas compressor quincy qrng series reciprocating gas compressor natural gas compressors quincy qsg series rotary screw gas compressor durable design Quincy QSG rotary gas
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. A Unit of IDEX Corporation.
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model Z45 Pump Model 491 Compressor Model C12 Pump Model HG62 Compressor A Unit of IDEX Corporation A Tradition of Excellence
More informationMA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
More informationC-VIP. compressors. Every component of the VIP. frame is designed to provide. built-in reliability and simplicity.
C C-VIP compressors Every component of the VIP frame is designed to provide built-in reliability and simplicity. Dresser-Rand s VIP cylinder incorporates advanced technology that is matched by our proven
More informationHD372A DISASSEMBLY SLIDES
COMPRESSORS 03/93 CB-128 HD372A DISASSEMBLY SLIDES Each slide has a descriptive paragraph. Each paragraph has the main points outlined so reading the full text word for word is not necessary when presenting
More informationHD172C PARTS LIST. Gasket Set Buna-N & Iron PTFE & Iron FKM & Iron Neoprene & Iron Ethylene Propylene & Iron
COMPRESSORS CB-9E-042 1995/12 HD172C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 792460 PTFE & Iron 792461 FKM & Iron 792462 Neoprene & Iron 792463 Ethylene Propylene
More informationModel Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationD-VIP. compressors. With several unique features, the D-VIP compressor is one of. the most versatile compressors. available today.
D D-VIP compressors With several unique features, the D-VIP compressor is one of the most versatile compressors available today. Dresser-Rand s D-VIP compressor uses unique design features of both the
More informationMA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP
MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP Number of Plungers... 5 Maximum Rated Speed...400 rpm Stroke Length...5.00 inches 127 mm Maximum Rated Power...300.0 hp 224 kw Maximum Rod Load 300M,
More informationQUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP
QUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP QUINCY QRDS SINGLE-STAGE, OIL-LESS Clean, oil-less air Quincy dependability High-efficiency, clean air CLEAN, OIL-LESS AIR
More informationLPG-Series. Pumps and Compressors. For LPG and NH 3 Stationary Applications
LPG-Series Pumps and Compressors For LPG and NH 3 Stationary Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken
More informationModern Auto Tech Study Guide Chapters 13 & 14 Pages Engine Construction 52 Points
Modern Auto Tech Study Guide Chapters 13 & 14 Pages 182-216 Engine Construction 52 Points Automotive Service 1. The engine top end includes the cylinder, valve cover and intake & exhaust. Head, Manifolds
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. Solutions beyond products... A Unit of IDEX Corporation
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model SC24 Pump Model 491 Compressor Model C12 Pump Model Z4500 Pump Model HG602 Compressor Solutions beyond products...
More informationFrame and Running Gear Data: CVIP. A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP. Stroke (in.) Rod Diameter (in.)
Frame and Running Gear Data: CVIP I. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP 1.0 General Stroke (in.) 4.0 5.0 6.0 Rod Diameter (in.) 2.0 2.0 2.0 Maximum
More informationQRDT. an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP
QRDT an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP QUINCY QRDT TWO-STAGE, OIL-LESS Clean, oil-free air Quincy dependability Setting the oil-less
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationMCGUIRE AIR COMPRESSORS INC HP RECIPROCATING BARE PUMPS. A-Series MCGUIRE AIR COMPRESSORS INC
7.5 40 HP RECIPROCATING BARE PUMPS A-Series CHAMPION A-SERIES Rugged Durability Premium Performance A Winning Combination Champion compressors are proven units, known for their reliability over decades
More informationCompressor Recording Data Book
Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com
More informationHDS162C PARTS LIST COMPRESSORS CB-9E /08. Bulletins Needed For Complete Parts List. Gasket Sets and Special Tools
COMPRESSORS CB-9E-350 2004/08 HDS162C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set FKM & Iron 792596 PTFE & Iron 792597 Packing Installation Tool 790536 Spanner Wrench, 1/4" Adjustable
More informationCorken Pumps. Corken Coro-Flo Regenerative Turbine Pumps. Corken C Series Coro-Flo Pumps. Corken F Series Coro-Flo Pumps
Corken Coro-Flo Regenerative Turbine Pumps The regenerative turbine pump is the most dependable LP gas pump on the market. The free floating impeller with teeth cut on both sides picks up the fluid and
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IH102C Installation, Operation & Maintenance Manual Model B177 External Automatic Bypass Valve Model B177 External Automatic Bypass Valve Warning: (1) Periodic inspection and maintenance
More informationAMERICAN EAGLE COMPRESSOR AND ACCESSORIES CATALOG. Your Contact: Telephone:
Your Contact: COMPRESSOR AND ACCESSORIES CATALOG Telephone: 800-392-3015 E-mail: sales@americaneagleacc.com www.americaneagleacc.com Designed & Manufactured in the U.S.A. Copyright 2016 11/17 STL000098
More informationCASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationFrame and Running Gear Data: MOS
Frame and Running Gear Data: MOS 1. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 5MOS 6MOS 7MOS 1.0 General - Stroke (in) 5.0 6.0 7.0 Rod Diameter (in) 2.25 2.25 2.25 Max.
More informationZ-Series. Coro-Vane Truck Pumps. For LPG, NH 3, and other Applications
Z-Series Coro-Vane Truck Pumps For LPG, NH 3, and other Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken s exceptional
More informationPARTS LIST FOR AIR COMPRESSORS AC-SH20-2 AC-SV20-2 ENGINE OIL GRADE: HONDA: SAE 10W-30. Below 40 F=SAE 10W-30 ENGINE OIL CAPACITY:
PARTS LIST FOR AIR COMPRESSORS AC-SH20-2 AC-SV20-2 ENGINE OIL GRADE: HONDA: SAE 10W-30 VANGUARD: Above 40 F=SAE30 Below 40 F=SAE 10W-30 ENGINE OIL CAPACITY: HONDA: 37 oz. VANGUARD: 40 oz. MAXIMUM PRESSURE
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationQR-25 Series. Reciprocating Air Compressors 1-25 HP
QR-25 Series QR-25 Series Reciprocating Air Compressors 1-25 HP Quincy QR-25 Basic Compressor Your Benefits Are By Our Design. 1 2 3 4 5 6 7 13 12 14 8 9 10 1 Low Operating Costs Intake unloaders allow
More informationQR-25 Series. Reciprocating Air Compressors 1-25 HP
QR-25 Series QR-25 Series Reciprocating Air Compressors 1-25 HP Quality Comes in All Shapes and Sizes But Just One Color. Quincy Has the Compressed Air Solution for Your Application. Since 1920, Quincy
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationan EnPro Industries company
QR-25 an EnPro Industries company QUINCY QR-25 SERIES RECIPROCATING AIR COMPRESSORS 1 25 HP QUINCY QR-25 SERIES THE QUINCY QR-25 SERIES INCLUDES 1-25 HP MODELS DELIVERING UP TO 175 PSIG Proven performance
More informationBLACKMER HDS COMPRESSORS
BLACKMER HDS COMPRESSORS Installation, Operation, and Maintenance Instructions 960479 INSTRUCTIONS CB9A-050 Section Effective Replaces 901 Nov 2008 Oct 2007 RECIPROCATING GAS COMPRESSORS for SOUR GAS SERVICE
More informationBLACKMER HD COMPRESSORS
BLACKMER HD COMPRESSORS Installation, Operation, and Maintenance Instructions MODELS HD942B, HDL942B and HDS942B 960483 INSTRUCTIONS CB9A-031 Section Effective Replaces 901 Jun 2011 Mar 2011 TABLE OF CONTENTS
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS DISCONTINUED MODELS LB362 LB362A LB362B
COMPRESSORS CB5A-020 1997/06 replaces CB112 06/97 INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS LB161 LB162 SAFETY DATA LB361 LB361A DISCONTINUED MODELS LB362 LB362A LB362B LB601 LB601A LB602 LB602A
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationINSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST
CMP SERIES CPM15-15B (25905F300) CPM15-15B-H/D (25905F301) CPM18-15B (25905F303) CPM18-15B-H/D (25905F304) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationseries2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION
TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger
More informationCRANKSHAFT & MAIN BEARINGS
CRANKSHAFT & MAIN BEARINGS * PLEASE READ THIS FIRST * REMOVAL Ensure all main bearing caps are marked for location on cylinder block. Some main bearing caps have an arrow stamped on them. The arrow must
More informationDouble door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems.
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems. Features Light weight, versatile design, 80 to 90% lighter than conventional full-body check valves.
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationENGINE MECHANICAL SPECIFICATIONS
GENERAL DESCRIPTION The 1955 Cadillac engine is of the V-8,overhead valve design, with a 3-13/16" bore and a 3-5/8" stroke to provide a piston displacement of 331 cubic inches. The compression ratio is
More informationQUINCY QRD SERIES SINGLE-STAGE, 2-20 HP TWO-STAGE, 5-30 HP OIL-LESS RECIPROCATING COMPRESSORS
QUINCY QRD SERIES SINGLE-STAGE, 2-20 HP TWO-STAGE, 5-30 HP OIL-LESS RECIPROCATING COMPRESSORS OIL-LESS COMPRESSORS QUINCY QRDS, SINGLE-STAGE Clean, oil-less air Quincy dependability High-efficiency, clean
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationPressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost effective valve selections
More informationPARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex. Copyright 2009, Mi-T-M Corporation
PARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Gasoline Air Compressor was constructed and designed with
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Lower End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Lower End Theory & Service To make work easier, one of the first steps often done before engine removal is to clean & degrease the engine compartment.
More informationCrosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
More informationCorken Compressor Repair
Corken Compressor Repair Click photo to make move Gauge Openings Inspection plate with model and serial #s Oil filter and oil pump assembly Crankcase breather vent Crankcase breather location. If excess
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationSNS COLLEGE OF TECHNOLOGY (An Autonomous Institution) Department of Automobile Engineering
SNS COLLEGE OF TECHNOLOGY (An Autonomous Institution) Department of Automobile Engineering ACADEMIC YEAR 2015-16 FIFTH SEMESTER AU 302 AUTOMOTIVE ENGINE COMPONENTS DESIGN UNIT 2 CYLINDER, PISTON & CONNECTING
More informationCast Iron, Two-Stage Air Compressors
CAMPBELL HAUSFELD Replacement Parts List Cast Iron, Two-Stage Air Compressors CI153120PS, CI253120PS and CI153120H5 Figure 1 - Replacement Parts Illustration For Model CI150000PS Part Number For Model
More information1950 Pacemaker. Specifications & Adjustments
Specifications & Adjustments Specifications & Adjustments ENGINE: Valve Arrangement Bore and Stroke Piston Displacement Maximum Torque Horsepower Actual Taxable Compression Ratio: Cast Iron Head (Std.)
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More information8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
More informationBLACKMER HD COMPRESSORS
BLACKMER HD COMPRESSORS Installation, Operation, and Maintenance Instructions 960477 INSTRUCTIONS CB9A-041 Section Effective Replaces 901 Feb 2012 Jun 2011 TWO-STAGE, NON-LUBE, RECIPROCATING GAS COMPRESSORS
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationPositive Displacement Pumps and Oil-Free Gas Compressors
BULLETIN 1-1 Section: 1 Effective: December 2 Replaces: May 2 Positive Displacement Pumps and Oil-Free Gas Compressors For Liquefied Gas Applications Military Marine Chemical Industrial Sanitary Energy
More informationDoosan XHP1070WCAT Bid Specifications
MANUFACTURER MODEL Doosan Infracore XHP1070WCAT ENGINE TIER 1 Make/model CATERPILLAR 3406TA Number of cylinders 6 Displacement 893 cid 14.6 L Bore and stroke 5.4 x 6.5 13.7cm x 16.5cm Speed idle / full
More information20.Cylinder Block. Cylinder Block A: REMOVAL ME(H4DOTC)-63 ST CRANKSHAFT STOPPER
Cylinder Block MECHANICAL 20.Cylinder Block A: REMOVAL Before conducting this procedure, drain engine oil completely. 1) Remove the intake manifold. 2)
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationENGINE 1ZZ-FE ENGINE DESCRIPTION EG-1 ENGINE - 1ZZ-FE ENGINE
EG-1 ENGINE - 1ZZ-FE ENGINE ENGINE 1ZZ-FE ENGINE DESCRIPTION The VVT-i (Variable Valve Timing-intelligent) system, the DIS (Direct Ignition System), and a plastic intake manifold have been used on the
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationProducts of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
More informationBLACKMER LB COMPRESSORS
BLACKMER LB COMPRESSORS Installation, Operation, and Maintenance Instructions MODELS: LB161B, LB361B, LB601B, LB162B, LB362C, LB602C, & Discontinued LB602B 960474 INSTRUCTIONS CB5A-021 Section Effective
More informationCoro-Flo Sales Catalog
LPGCFP100C LPG Pumps Coro-Flo Sales Catalog FF-Model DL-Model DLF-Model C-Model Table of Contents General Information What is a Coro-Flo Pump...3 History of the Coro-Flo Pump... 4 Markets Served... 4 Model
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationSignificant Model Changes: HD Compressors
COMPRESSORS CB-319 2007/06 Significant Model Changes: HD Compressors Date Description Models Feb 2007 Roller Bearings & S3R Seal HD600 AND HD900 Series July 2001 ANSI Flanged Heads HD361C, HD362C, HD363C
More informationIMPORTANT INFORMATION
Table of Contents IMPORTANT INFORMATION Section 1A - Specifications SPECIFICATIONS 1 A Master Specifications.................... 1A-2 Torque Chart......................... 1A-6 Standard Hardware...................
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationBLACKMER HDS COMPRESSORS
BLACKMER HDS COMPRESSORS Installation, Operation, and Maintenance Instructions 960479 INSTRUCTIONS NO. CB312 Section Effective Replaces 901 August 2004 New RECIPROCATING GAS COMPRESSORS for SOUR GAS SERVICE
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationKF Valves Check Valves
Check Valves Excellence In Flow Control High Performance By Design Applicable Standards KF check valves conform to ANSI, API and NACE specifications to meet your application requirements. ANSI- American
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationSeries Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
More information