Modular Connectors MOD series Modular Connectors Outline MOD series connectors comply with FCC and NTT standards, allowing them to be used for international products. Features Because these connectors are designed as smaller-sized and light-weight connectors, they are suitable for high density equipment with limited space. The contact plating is gold plate, ensuring that the connectors provide high reliability and secure contact. Through- and crimping type jacks are available. Ensures secure connectors with screw locks in the fit state, and fixed strength. Provides EMI-filtered countermeasure products. Principal Applications PDA, Modem, TA, factory automation (FA) equipment, industrial cameras, various electronic devices Electrical Characteristics Rated voltage Rated current Insulation resistance Dielectric withstanding voltage Contact resistance 125V AC (r.m.s.).5 to 1.5 A (Jack) Over 1 megohms at 1V DC 5V AC (r.m.s.) 2 to 6 milliohms or less Document Disclaimer When placing orders with us, minimum order quantities are set for every product. Be sure to contact us before starting preliminary design of PCBs using our connectors. The specifications and information shown in the catalog are subject to change without notice.
Reflow temperature profile (for reference purposes) ( C) 25 Peak: 25 +5 C 23 C or more Flow temperature profile (for reference purposes) 26±5 C 5sec Temperture 2 15 1 18 C 15 C Preheating Zone 9±3s 3±1s Soldering Zone 1~13 C 3~6sec 5 Heating time The reflow temperature profile shown in this drawing is for reference purposes. This profile depends on requirements such as reflow equipment, soldering paste, and PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own reflow temperature profile. ΩApplicable products MOD-J88YA( )A+ MOD-SJ88YA( )A+ MOD-J88YA2E+ MOD-YSJ88YA3C+ The flow temperature profile as shown above is for reference purposes. This profile depends on requirements such as the PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own flow temperature profile. ΩApplicable products MOD-J4( )DA( )A+ MOD-J6( )DA( )A+ MOD-J6( )DA( )B+ MOD-J88DA12A+ MOD-SJ88DA2D( )+ MOD-SJ88DA2B+ MOD-YSJ88D3C+ The profile shown in this drawing is applicable only for those products shown above. The profile shown in this drawing is applicable only for those products shown above.
Product List Right-angle through type MOD-J4( )DA( )A+ Right-angle through type MOD-J6( )DA( )A+ Right-angle through type MOD-J6( )DA( )B+ Cap for Jack MOD-6C( ) E-6MOD MOD series...4 E-7MOD MOD series...5 E-8MOD MOD series...6 E-9MOD MOD series...7 Right-angle through type MOD-J88DA12A+ E-1MOD MOD series...8 Right-angle SMT type MOD-J88YA( )A+ E-11MOD MOD series...9 Right-angle SMT type MOD-SJ88YA( )A+ E-12MOD MOD series...1 Right-angle through type (With ferrite core) MOD-SJ88DA2D( )+ E-13MOD MOD series...11 Right-angle through type MOD-SJ88DA2B+ E-14MOD MOD series...12 Right-angle SMT type MOD-J88YA2E+ E-15MOD MOD series...13 Right-angle SMT type s MOD-SJ88YA2B3+ E-16MOD MOD series...14 Right-angle RJ45 modular jack with cables for panels MOD-J88W22-AS( )+ E-17MOD MOD series...15 Right-angle R11 modular jack with cables for panels MOD-J62W22-AS( )+ E-18MOD MOD series...16 Straight through type MOD-YSJ88D3C+ E-19MOD MOD series...17 Right-angle SMT type MOD-YSJ88YA3C+ E-2MOD MOD series...18 Modular plug MOD-YSP88P3+ E-21MOD MOD series...19
Right-angle through type MOD-J4( )DA( )A+ For PCB Right-angle Through FCC Standard MOD- J 4 ( ) DA ( )A+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 4 contacts No. of contacts 2: 4-2 Jack 4: 4-4 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate 12.2 13 3 14 ø.46 2-ø2.4.1 3.5 ±.5 1.2 ±.5 2.54 ±.5 7.3 2.54 2.54 4-ø.8 ±.5 Edge of jack 2.54 ±.5 7.3 9.4 1.2 3.5 9.4 ±.5 1.8 Contacts Insulator Mating connectors: 4-4 modular plug Through SMT Press-in IDC Soldering Crimping wrapping
Right-angle through type MOD-J6( )DA( )A+ For PCB Right-angle Through FCC Standard MOD- J 6 ( ) DA ( )A+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 6 contacts No. of contacts 2: 6-2 Jack 4: 6-4 Jack 6: 6-6 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate 12.2 13 3 14 ø.46 2-ø-2.4.1 5.8 ±.5 3.5 ±.5 7.3 2.54 2.54 1.2 ±.5 2.54 ±.5 6-ø-.8 ±.5 Edge of jack 2.54 ±.5 7.3 9.4 1.2 3.5 5.8 9.4 ±.5 1.8 Contacts Insulator Mating connectors: 6-2, 6-4, 6-6 modular plug Accessory: Cap: MOD-6C( ) wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle through type MOD-J6( )DA( )B+ For PCB Right-angle Through FCC Standard MOD- J 6 ( ) DA ( )B+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 6 contacts No. of contacts 2: 6-2 Jack 4: 6-4 Jack 6: 6-6 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate 14.8 12.2 2.5 14 3 2.5 14 ø.46 12 1.2 3.5 5.8 7 1.3 2.54 5.8 ±.5 6-ø.8 ±.5 3.5 ±.5 2-ø2.4.1 1.2 ±.5 7 2.54 ±.5 1.3 ±.5 Edge of jack 12 ±.5 Contacts Insulator Mating connectors: 6-2, 6-4, 6-6 modular plug Accessory: Cap: MOD-6C( ) Through SMT Press-in IDC Soldering Crimping wrapping
Cap for Jack MOD-6C( ) Accessorys Cap MOD- 6C ( ) ➀ ➁ ➂ Series name Cap for 6 contacts Externals size Y 7.5 1 X Dimensions Part No. X MOD-6C2 MOD-6C2A 15.8 MOD-6C3 14.6 Y 12 11 12 Mating connectors: 6-2, 6-4, 6-6 Caps for Jac wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle through type MOD-J88DA12A+ For PCB Right-angle Through IEC, FCC MOD MOD MOD MOD- J88 DA 12 A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack Type of contact Right-angle through type Contact plating Min. 1.27 μm Gold plate 2.8 1.27 2.35 17.8 15.2 16 3.8 3.2.35.4 2.54 6.35 1.54 1.27 7=8.89 11.43 1.27 7=8.89 ±.5 1.27 ±.5 ø.8 +.1 11.43 ±.5 ø3.1 +.5 Contacts Insulator 2.54 ±.5 6.35 ±.5 1.54 Edge of jack Mating connectors: 8-8 modular plug Through SMT Press-in IDC Soldering Crimping wrapping
Right-angle SMT type MOD-J88YA( )A+ For PCB Right-angle SMT FCC MOD- J88 YA ( )A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack Type of contact Right-angle SMT type Contact plating 2: Min..2 μm Gold plate 7: Min..76 μm Gold plate 12: Min. 1.27 μm Gold plate 22 REF. 18.3 3.7 15.2 17.8 15.2 12 2.5 1.5 12.5 11.5 2 1.4 2-ø1.8 2.6 1.7 2.1 17.8 2.1 1.6 4.8 Contacts Hold down Insulator 7.5 3.2 1.2 7.14.35 11.1 3.2 ø2.1 3.5 9.5 2 1.9 +.1 1.4 ±.1 4-R1.4 Pattern 1.2 ±.5 7.14 ±.1 +.5 1.9 +.1.6 REF. 2.8 +.1 ø2.5 ±.5 11.1 ±.1 3 2 Mating connectors: 8-8 modular plug wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle SMT type MOD-SJ88YA( )A+ For PCB Right-angle SMT FCC MOD- SJ88 YA ( ) A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack with shield Type of contact Right-angle SMT type Contact plating 2: Min..2 μm Gold plate 7: Min..76 μm Gold plate 12: Min. 1.27 μm Gold plate 22.2 REF. 18.5 3.7 15.2 18.2 15.6 12 2.5 1.9 12.7 11.7 22 1.4 2-ø1.8 2.6 1.7 3.5 1.6 4.8 17.8 3.5 Contacts Insulator Shield 4.2 1.7 1.2 7.14.35 11.1 3.4 ø2.1 3.5 6.2.7 1.9 +.1 1.4 ±.1 ø2.5 ±.5 4-R1.4 Pattern 1.2 ±.5 7.14 ±.1 +.5.6 REF. 1.9 +.1 2.8 +.1 11.1 ±.1 3 2 Mating connectors: 8-8 modular plug Through SMT Press-in IDC Soldering Crimping wrapping
Right-angle through type (With ferrite core) MOD-SJ88DA2D( )+ For PCB Right-angle Through ISO 1173 MOD- SJ88 DA 2 D( )+ Series name 8-8 Jack with shield (ISO1173) Type of contact Right-angle through type Contact plating: Min..2 μm Gold plate Ferrite core Blank: Provided 1 : None.76 7.4 8.6 7.11 5.8 3.5 1.2 17.6 16.5 1.27 11.8 3 Insulator Contacts Shell Ferrite core.35 7.71 REF. 4.5 9.1 11.9 1.27 1 7.2 ±.5 6 ±.5 2 ±.5 6 ±.1 8-.8 ±.5 4.5 ±.1 7.3 ±.5 7.2 6 2.35 7.11 ±.5 5.8 ±.5 3.5 ±.5 1.2 ±.5.6 ±.5 8.5 ±.5 2.4 ±.5 4-R.3 Edge of connector Mating connectors: 8-8 modular plug (ISO1173) wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle through type MOD-SJ88DA2B+ For PCB Right-angle Through IEC, FCC MOD- SJ88 DA 2B+ ➀ ➁ ➂ ➃ Series name 8-8 Jack with shield Type of contact Right-angle through type Contact plating: Min..2 μm Gold plate 5.7 2 14 Groove part 18 1.2.5 1.9 14 POS.#8 1.2 7=7.14 1.2 17.8.5 POS.#1.45.35 4.3 2.54 1.1 8-.8 ±.5 4-R.3 ±.5 17.8 ±.1 2.2 ±.5 POS.#8 Contacts Insulator Shield.6 ±.5 1.2 ±.5 POS.#1 POS.#2 3.1MAX. 2.54 ±.5 1.1 ±.5 1.2 7=7.14 ±.5 Mating connectors: 8-8 modular plug 8-8 modular plug (With shield) Through SMT Press-in IDC Soldering Crimping wrapping
Right-angle SMT type MOD-J88YA2E+ For PCB Right-angle SMT ISO 1173 MOD- J88 YA 2 E+ ➀ ➁ ➂ ➃ Series name 8-8 Jack (ISO 1173) Type of contact Right-angle SMT type Contact plating: Min..2 μm Gold plate 7.11.35 5.8 3.5 1.2 2.15 (SMT lead size) 1.27 16.6 11.9 9.1 7.71 REF. 4.5 11.5 2.2.3 12.8 1.27 2.5 14.2 16.7 4.8 ±.1 4 17.5 +.1 1.9 +.1 Insulator Contacts Hold down 1.75 ±.1 3.6 ±.1 6 ±.1 Edge of connector.6 ±.5 1.2 ±.2 3.5 ±.2 5.8 ±.2 7.11 ±.2 Mating connectors: 8-8 modular plug (ISO 1173) wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle RJ45 modular jack with cables for panels MOD-J88W22-AS( )+ For panels Right-angle, with cables Misinsertion prevention, FCC Standard MOD- J88 W22- AS( )+ ➀ ➁ ➂ ➃ ➀ Series name ➁ 8-8 jack ➂ Misinsertion prevention, crimping type ➃ Cable length 5 3.5 2 (14) 4.5 min. (11.3) 1.2 min. 11.4 12 7.11 5.8 3.5 1.2 Recommended panel layout.6 11 L 1.7 1.9 13.6 1 Terminal strip 13.6 5.7 6.1 3.45 1.8 2.9 11.9 12.9 ➀ Insulator A ➁ Insulator B ➂ Contacts ➃ Contacts ➄ Misinsertion prevention lever ➅ Misinsertion prevention Key ➆ Cable A 1.1 5 8 Mating connectors: 8-8 plug wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle R11 modular jack with cables for panels MOD-J62W22-AS( )+ For panels Right-angle, with cables FCC Standard MOD MOD MOD MOD- J62 W22- AS( )+ ➀ ➁ ➂ ➃ ➀ Series name ➁ 6-2 jack ➂ Misinsertion prevention, crimping type ➃ Cable length 9.4 11.6 12.9 (Note 1) 11.9 (11) 9 7.5 3.5 2 1.8 2.73 1.8 Terminal strip 1.9 13.6 9.84 1.2 1.1 9.9 L 1.7 8 2 2 3.5 ➀ Insulator A ➁ Insulator B ➂ Contacts ➃ Contacts ➄ Cable 5 6.5 A 5 1 Mating connectors: 6-2 plug Through SMT Press-in IDC Soldering Crimping wrapping
Straight through type MOD-YSJ88D3C+ For panel (Screw lock) Straight through For RJ-45 MOD- YSJ88 D3C+ ➀ ➁ ➂ Series name 8-8 Jack with shield Straight through type 5 5.6 26.4 2 15.6 1 REF. 11 4-ø1.5 2.4 13.25 8.45 HONDA 1 REF. POS. #8 POS. #1 5.7 REF. 2.5 5.3 2 REF. 11 6.5 REF. Contacts Shell Insulator Nuts Screw lock 4-R.5 -.1 2-R1.15 +.4 16MIN. 2 ±.5 7.4MIN. 6.25MIN. Recommended panel mounting- layout t=1.2mm~1.6mm The lock screw is appended. 8.845 ±.5 8-ø.8 ±.5 11 ±.5 7 ±.5 POS. #8 1.5 +.1 R.2 +.1.4 +.1 2.54 ±.5 1.2 ±.5 15.4 ±.5 7.14 ±.1 t=1mm~1.6mm 2-ø1.6 +.1 POS. #1 POS. #2 Mating connectors: Assembly of MOD-YSP88P3C+ use wrapping Crimping Soldering IDC Press-in SMT Through
Right-angle SMT type MOD-YSJ88YA3C+ For panel (Screw lock) Right-angle SMT For RJ-45 MOD- YSJ88 YA3C+ ➀ ➁ ➂ Series name 8-8 Jack with shield Right-angle SMT type 5 5.6 26.4 2 15.6 1 REF. 11 4-ø1.5 2.4 13.25 8.45 HONDA 1 REF. POS. #8 POS. #1 5.7 REF. 2.5 5.3 2 REF. 11 6.5 REF. Contacts Shell Insulator Nuts Screw lock 4-R.5 -.1 2-R1.15 +.4 The lock screw is appended. 16MIN. 2 ±.5 7.4MIN. 6.25MIN. Recommended panel mounting- layout t=1.2mm~1.6mm 3.4 ±.5 2.6 17.4±.5 ±.5 11 ±.5 POS. #1 POS. #8.65 ±.5 1.2 ±.5 7.14 ±.1 5.5-1 ø2-1.6 +.1 t=1mm~1.6mm 8.5MIN. 2.4 -.1 2.15 -.1 4.45 +.5 Mating connectors: Assembly of MOD-YSP88P3C+ use Through SMT Press-in IDC Soldering Crimping wrapping
Modular Plug MOD-YSP88P3+ For cable Screw lock MOD- YSP88 P3+ ➀ ➁ ➂ Series name 8-8 Jack with shield Piyasshing Note 1: Minimum order size is 1, items. Note 2: When you buy connectors without overmold, please prepare the overmold yourself. 22.6 17.9 2.6 1.2 3.5 REF. 26.4 REF. 19.4 REF. 8.7 +.2 6.6 11.68 26 2 2 29 REF. 3.15 REF. Straight type Screw lock Contacts Shell A Shell B Insulator Screw lock The lock screw is appended. * If you are considering the purchase of harness work parts, please contact us for details. Mating connectors: MOD-YSJ88D3C+, MOD-YSJ88YA3C+ wrapping Crimping Soldering IDC Press-in SMT Through